Sending mails from client where SAPSERVER not connected to internet.

Hi
gurus
How to send mails thru my sap client , which is connected to server located different place. with Server Name esmart03_ESM_00 and my client , ESM(800).
1.The server is not connected to Internet.
SCOT settings maintained is
Default Domain ESM800
SMTP NODE settings
SAP Connect   General
Node = SMTP
Description= mailserver
Mail Host = local host
port = 25
code page = 1100
checked Internet and * in Addrr
Default Domain = esmart
RZ10 Settings.
icm/server_port_2                           PROT=SMTP,PORT=25,host=smtp.googlemail.com,TIMEOUT=180
is/SMTP/virt_host_2                         *:25;
i had checked smicm for smtp port active, it is active as well as scif..
I appreciate for your answers where pts will be awarded..
i had gone thru sapnotes as well as help.sap.com..
regards
sriram venkat.

Hi,
Your config is IMHO wrong.
You need to set smtp.googlemail.com in the SCOT settings and to remove it from icm/server_port_2.
You also need connectivity between your SAP server and smtp.googlemail.com.
There are 99% chances out of 100, that you need to open firewalls rules and/or set proxy servers.
Check that with your network team.
Regards,
Olivier

Similar Messages

I want to bcc myself when sending mail from one account but not another. When I check "automatically bcc myself", it bcc's me from both accounts. Can I set this to work with only one account?

I have two mail accounts on my Mac. I want one account to bcc me when I send emails from that account. I checked "automatically bcc myself" under mail>preferences>composing, but both accounts bcc me when sending mail. Can I set this to only bcc myself from one specific email account? Thanks.

It does not make sense that your ssh does not have a dash capital Y (-Y) option. It is in "man ssh", and my 10.6.6 has the -Y option, and I've had a -Y option since at least Tiger (10.4) days.
My ssh is in /usr/bin/ssh
I'm not very good at X11 issues, so I'm just throwing ideas out there.
Does your broken account have a $HOME/.ssh/config file, and if so, what is in it?
Does the broken account have any $HOME/.x* or $HOME/.X* files that X11 might be reading to configure your X11 behavior differently from the new test account?
$HOME/.Xauthority
$HOME/.Xdefaults-<hostname>
$HOME/.Xresources
$HOME/.ICEauthority
$HOME/.keymap.km
The above are a few names I found looking through "man X"
While I'm thinking about it, I assume that when going to the server, you are using the exact same user account on the server, so that you have a constant at least at that end.
Have you tried trashing your
$HOME/Library/Preferences/org.x.X11.plist
file, to see if that is affecting the broken account?
Again, I am just throwing out ideas to see if anything sticks.

Sending Mail from iPhone over SSL-encrypted connection

Hi,
when I synced my mail accounts to the iphone I had to accept the invalid certificate (it is self signed) once and that made imap work.
When I tried to send a mail over an encrypted connection to the smtp server, using the same certificate, it never asked me anything but refuses to send out the mail. It just stays in the outbox.
On server side I see in the logs:
lost connection after STARTTLS from <My Iphones Ip>
Is it possible to send mail using self signed certs with the iPhone these days. Or do I have to wait (or get an signed cert). Is there something like keychain management on the phone?
Thank you in advance.
Christian

Hi!
I am suffering from the same problem. Did you found a solution already?

Sending mail from SAP to Lotus Notes

Hi all,
I need to send an email from SAP to Lotus Notes . For this I am using function module SO_NEW_DOCUMENT_ATT_SEND_API1 . But exception 'DOCUMENT_NOT_SENT' is getting raised . Could anyone please tell me what can be the possible reasons for that.
Thanks in Advance.

Hi,
Please check the mail settings in SCOT.
refere the note 455140.
FM :-
docdata-obj_descr = <Subject>.
Append l_txt to objtxt.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
    EXPORTING
      document_data                    = docdata
      put_in_outbox                    = 'X'
     commit_work                      = 'X'
    TABLES
      object_content                     = objtxt
      receivers                         = reclist
EXCEPTIONS
   too_many_receivers               = 1
   document_not_sent                = 2
   document_type_not_exist          = 3
   operation_no_authorization       = 4
   parameter_error                  = 5
   x_error                          = 6
   enqueue_error                    = 7
   OTHERS                           = 8.
Revert back if u need more information.
regards,
mahantesh

Can Apple TV work from home sharing if not connected to internet?

I have recently purchased Apple TV but where it has to be connected to the TV it cannot be detected by the Airport Wifi router that is placed on the property.
I can use my Macbook to connect to the internet, but can I some how use home sharing to my Apple Tv even if it is not connected to the internet?
If not, is there any other possible way to get Apple TV to work?

I would get a pair of mains powerline networking adapters to send ethernet from the router to the AppleTV across the mains.
Unfortunately AppleTv requires internet to briefly authorise protected content and won't work without it via Home Sharing.
A while since I tested unprotected content but I suspect that won;t work either as AppleTV needs internet to set the time.
AC

Send Mail from, but Not Include Mailboxes

Any way to send mail from an account, but not include that account's mailboxes in mail.app

Depends on the provider of any other accounts. For example, you can add an address to the preferences of another existing account, separated by a comma, and have that additional address available in the list of From addresses. Then if your SMTP will allow, you can send from that address.
Doesn't work with the Gmail SMTP, as it will change the From to be what is used to Authenticate the SMTP.
See:
http://support.apple.com/kb/TA23485
Another address can be set up similar to a true alias.
Ernie

Error: Not able send mail from OWA 2010. When I send mail, the mails go to Drafts Folder.

Error: Not able to send mail from OWA 2010. When I send mail, the mails go to Drafts Folder. I have installed everything correctly but when I tried to open the OWA and trying to send mail from OWA. The mails do not deliver and mails become saved in Drafts folder. I tried to re-send messaged from Draft also but not able to send.
Screen Shot: http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/Error%20-%20Not%20Able%20to%20Send%20Mail%20from%20OWA%202010.docx
Scenario: I have below configuration of exchange 2010 server Setup:
1. Windows Domain Controller with Global Catalog on Windows Server 2008 which only for Windows 2008 Server Native.
Server Name: WDC2010
Domain: Blazex.Com
2. Hub/Client Access Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
After that installed the Hub/Client Access Exchange role servers.
Server Name: HC2010.blazex.com (This is not a Addition Member server or ADC)
Role: Hub and Client Access Server.
3. Mailbox Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
After that installed the Mailbox Exchange role servers.
Server Name: MBX2010.blazex.com (This is not a Addition Member server or ADC)
Role: Mailbox Server.
4. 2nd Mailbox Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
After that installed the Mailbox Exchange role servers.
Server Name: 2MBX2010.blazex.com (This is not a Addition Member server or ADC)
Role: Mailbox Server.
5. Client Windows 7: It is installed on Windows 7 Ultimate Workstation. As per Microsoft recommendation, I have just installed Windows 7 and then join this computer to Blazex.com.
Workstation Name: WIN7.blazex.com
Role: Workstation
Error Description: I have installed everything correctly but when I tried to open the OWA and trying to send mail from OWA. The mails do not deliver and mails become saved in Drafts folder. I tried to re-send messaged from Draft also but not able to send.
Screen Shot (Same As Above): http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/Error%20-%20Not%20Able%20to%20Send%20Mail%20from%20OWA%202010.docx
I don't know what I am missing but I think there is some configuration I need to do on Hub/Client Access Server (HC2010). I tried to access the mailbox on XP Client system through OWA. I get the same problem as Win7.
Can someone please help me on this?
Thanks and Regards
Shambhu

Hi Subhash,
I have done the troubleshooting but I didn't find any problem at server side. I will send you mail also with all EXBPA report and as well DC, HC and Mailbox servers' Application Log and System Log.
Below are the questions's answers which was asked by you:
1.     Please check whether you can send email via Outlook.
I am not able to open the MS Outlook. Please check all details in this thread : http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/c491c5c7-7d6f-48ff-97fa-6bf83d94e53c
2.     Please run EXBPA to have a health scan.
I have run the EXBPA and didn't see any critical Problem. I have took the screen shot and report. Please have a look in below screen shot link:
a. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/EXBPA.docx                                                                            - Final Report
b. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.BaseLine.200906270226501077.data.xml                        - Baseline Health Check
c. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Connectivity%20Test.200906270223318201.data.xml      - Connectivity Check
d. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Health%20Check.200906270125477730.data.xml            - Health Check with 2 Hr. Baseline option
e. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Permission%20Check.200906270224343377.data.xml      - Permission Report
The error which I received in EXBPA, that allready ignored by you and told that it is bug in EXBPA. Have a look here: http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/d4bb03bb-db84-4a8b-83ba-19937d7dcacf
3.     Please check application log, whether any error event logged there. They could come from ADAccess related error or etc.
I didn't see any ADAccess event on the server. For this I have left my lab PC open and I will check again.
4.     We find that if mail .que gets corrupt, then this issue will occur, please try to move the affected user to another store and then test the issue.
I am facing this problem with all users (7 users). Anyway I moved one user from one server Mailbox Database (2mbx2010) to Other Server Mailbox Database (mbx2010). After that
a) Rebooted the Workstation
b) Login successfully with same user.
c) Delete the Old MS Outlook Profile
d) Create New profile for same user without any problem.
e) Tried to login in MS Outlook and got the same error. : http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/c491c5c7-7d6f-48ff-97fa-6bf83d94e53c
f) Open the OWA successfully for Same user.
g) Tried to send mail but again mail went to Drafts Folder.
5.     I noticed that you test the issue after you close outlook. I recommend you to reboot your pc and then access
mailbox via OWA to test the issue.
I tried you suggested option, but sorry it also couldn't help.
6. You also check your disk space.
     All Servers have Enough Disk Space. Check the EXBPA Report.
7. You may run EXTRA to get log information for further troubleshooting.
Need more time for this.
8. Please save application log, system log as *.evt file, then send them with EXTRA,EXBPA report to [email protected] .
   I have sent it as your mentioned mail address OR, you can get the mentioned log from below link also:
   a) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/WDC2010%7C_APPLICATION.evtx           - DC/GC Application Log
   b) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/WDC2010%7C_SYSTEMEVENT.evtx          - DC/GC System Log
   c) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/HC2010%7C_APPLICATION.evtx              - Hub/Client Application Log
   d) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/HC2010%7C_SYSTEM.evtx                      - Hub/Client System Log
   e) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/MBX2010%7C_Application.evtx                - Mailbox Application Log
   f) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/MBX2010%7C_System.evtx                      - Mailbox System Log
There will be some error log you will be that the system is not able to communicate with DC/DC, MBX or HC at everyday around 3 AM or some time 6 PM Evening also. These error came because I have installed VM on Windows 7 Workstation and after 45 min or one hrs. if I don't work on PC, then pc goes to sleep. so you may ignore these alerts.
I hope my answer will give you some clue and I expect more help from your side.
With Best Regards
Shambhu Sharma

TS4291 I can't send mail from my iPad apps, I just get the error message, 'The recipient- was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.

I can't send mail from my iPad apps, I just get the error message, 'The recipient… was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

How do I specify the gmail outgoing server if I have multiple gmail accounts in my mail? I have 2 business accounts and when I send mail from one account, it is sent from the other account and the sending email is not from the correct account.

I love my apple email and do not want to use google mail on safari. However, I have 2 gmail accounts set up on apple mail, but when I send mail from one of my gmail accounts (I choose the specific gmail account in the drop down window), it actually goes out as if it is from the other gmail account. I can't have that happen because one is my job, the other is a personal business account and unfortunately, the mail from both gmail accounts want to send through the personal business account. How do I make it send from a specific gmail account? I even tried deleting the accounts and setting them up again hoping I set it up wrong in the first place, but to no avail, it is still doing the same thing except this time I set the job account up first and then the personal business account and now everything goes from the job account! The only good thing is that the incoming messages work properly and they go into the correct inbox. Somebody please fix my outbox!

In Mail Preferences/Accounts/each GMail account, set up the SMTP Outgoing Server for each account separately, going into SMTP name/edit/Advanced and specify the Username of each account. The Outgoing servers must be two different servers, authenticated by the Username and Password of each.
Otherwise, the GMail SMTP server will change the from address to that of the account where the SMTP server was setup.
Ernie

Error in sending mail : SMTPSendFailedExcept Client was not authenticated

Hello all,
I am new to the forum,
I have a small program to send mail to Microsoft exchange server.
Now the server is enabled with https option.
Now i am getting error :
com.sun.mail.smtp.SMTPSendFailedException: 530 5.7.1 Client was not authenticated
at com.sun.mail.smtp.SMTPTransport.issueSendCommand(SMTPTransport.java:1668)
at com.sun.mail.smtp.SMTPTransport.mailFrom(SMTPTransport.java:1207)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:735)
at javax.mail.Transport.send0(Transport.java:191)
at javax.mail.Transport.send(Transport.java:120)
at SendEmail.main(SendEmail.java:55)
there are two things:
As the program sends mail from a webpage, a user password used for login to the webpage is different from his mail server password, it is not possible to give a username and password to send mail / read mail from the exchange server.
Please give any other option without passing user name and password to the exchange server.

1. Reconfigure the Exchange server to allow sending without authentication.
2. Authenticate to the Exchange server using credentials specific to the web application itself.
Configure the Exchange server to allow the user with those credentials to send mail that appears
to be from any other user.
No, I don't know how to do any of that with Exchange; ask Microsoft.

Mail 10.8.3 not sending mail from intended account

Since upgrading from 10.8.2 to 10.8.3, my wife is having a new problem where Mail is not sending mail from the intended account.
She has 2 mail acocunts, and normally sends most e-mail from one of them. That mail account is set as the default to send messages from.
Now when she composes messages, it sends them from the other account, even if she has made certain that the pull-down choice of "send message as..." is set to the correct/desired mail account.
The only way she was able to stop this was to deactivate the other e-mail account in Mail's preferences.
Is anyone else having this problem?

Hi.
Please click on the Mail > Prefrence > Account.
then click on the first account on the left side & Uncheck the option 'Use onlythis server'
repeat the step for the second account aswell.
this should fix your issue.
Kind regards,
Ayaz

Have problems sending mail from a secure wireless connection. but ok from starbucks

I have several clients here at my marina all using different email providers and they all seem to have problems sending out mail from my secure wireless. They can recieve mail no problem. Now here is where it get weird. I added my gmail account to one of the problem iphones and same thing was happening, when i go to send out an email from my account on their phone it gets stuck trying to send mail. I compaired server setting on my phone to his and everything was that same, even turned off his server from fairpoint(the email he uses) and kept my gmail one and still couldnt send mail from his phone but worked fine on mine. Apple set up this individuals iphone/ipad so it make me think they did something when he had the accounts added. Any thoughts?

look here for gmail accounts
http://support.apple.com/kb/TS3058

Send mail from database server to client

Hi,
i Want to send mails from oracle database (10gR1 on windows 2003) to user client systems (Developer 6i). Can anyone tell me how it is possible ?
Thanks

You can use utl_smtp to send mail or Java stored procedure to send the mail.
example of utl_smtp.
CREATE OR REPLACE PROCEDURE SEND_MAIL (
msg_to varchar2,
msg_subject varchar2,
msg_text varchar2 )
IS
c utl_smtp.connection;
rc integer;
msg_from varchar2(50) := 'Oracle9.2';
mailhost VARCHAR2(30) := '127.0.0.1'; -- local database host
BEGIN
c := utl_smtp.open_connection(mailhost, 25); -- SMTP on port 25
utl_smtp.helo(c, mailhost);
utl_smtp.mail(c, msg_from);
utl_smtp.rcpt(c, msg_to);
utl_smtp.data(c,'From: Oracle Database' || utl_tcp.crlf ||
'To: ' || msg_to || utl_tcp.crlf ||
'Subject: ' || msg_subject ||
utl_tcp.crlf || msg_text);
utl_smtp.quit(c);
EXCEPTION
WHEN UTL_SMTP.INVALID_OPERATION THEN
dbms_output.put_line(' Invalid Operation in Mail attempt
using UTL_SMTP.');
WHEN UTL_SMTP.TRANSIENT_ERROR THEN
dbms_output.put_line(' Temporary e-mail issue - try again');
WHEN UTL_SMTP.PERMANENT_ERROR THEN
dbms_output.put_line(' Permanent Error Encountered.');
END;
http://www.oracleutilities.com/Packages/utl_smtp.html

No Mail. I can not get or send mail from my iPhone,iCloud, or mail on the desktop. Password is correct i can get into iCloud but not able to get mail.

I can not get or send mail from my iPhone, iCloud, and desktop mail. All are the same account, password is right and working. When the problem first happened I updated to a new password.
The Mail and the phone are telling me ( "The iCloud IMAP server “p99-imap.mail.me.com” rejected the password for user “k****n******2”}
From the iCloud account i get a message saying mail could not be loaded and the details. Which i have copyed below.
Any thoughts or anyone I can ring ? This was a paid for mobile me account.
Thanks
Running 10.72
ORIGIN
server
TYPE
error
BUILDNUMBER
1FCS29.34215
TIME
Sun Dec 11 2011 10:49:50 GMT+0000 (GMT)        (1323600590380)
HOST
www.icloud.com
USERAGENT
Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_2) AppleWebKit/534.52.7 (KHTML, like Gecko) Version/5.1.2 Safari/534.52.7
PRSID
217870346
RECENTLOGMESSAGES
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: MAIL in main()
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: --> Request 1:   POST to https://p99-mailws.icloud.com:443/wm/preference, headers: Content-Type=text/plain, body: (omitted)
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: Request out: /wm/preference-list-->1323600562085/1
          params: {"locale":"en-us","timeZone":"Europe/Dublin"}
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: SC.Object:sc1074:dispatch('load content')
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: "2.0 Waiting for Content" handled event 'load content' (no transition)
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: SC.Module: Attempting to load 'addresses'
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: SC.Module: Module 'addresses' is not loaded, loading now.
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: SC.Module: Loading JavaScript file in 'addresses' -> '/applications/mail/frameworks/addresses/en-us/1FCS29/javascript.js'
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: SC.Object:sc3099:initStatechart()
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: -> entering "9 Address List Not Visible"
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: --> Request 2:   GET to https://p03-contactsws.icloud.com:443/co/addressbook/?order=first,last&locale=en _US, headers: Content-Type=text/plain, body: (omitted)
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: SC.Module: Module 'addresses' finished loading.
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: SC.Module: Evaluating and invoking callbacks for 'addresses'.
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: SC.Module: Module 'addresses' has completed loading, invoking callbacks.
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: APPLICATION: Received applicationWillBecomeActive
Sun, 11 Dec 2011 10:49:23 GMT: WARN: APPLICATION: Received applicationDidBecomeActive
Sun, 11 Dec 2011 10:49:23 GMT: DEBUG: <-- Response 2: 200 (1257ms), headers: Cache-Control=no-cache, no-store, private, Content-Type=application/json; charset=UTF-8 body: (omitted)
Sun, 11 Dec 2011 10:49:25 GMT: DEBUG: willReceive: Status:500, Request:/wm/preference
Sun, 11 Dec 2011 10:49:25 GMT: DEBUG: Got HTTP 500 : Redirecting request: /wm/preference : Redirect count:1
Sun, 11 Dec 2011 10:49:25 GMT: DEBUG: --> Request 3:   POST to https://p99-mailws.icloud.com:443/wm/preference, headers: Content-Type=text/plain, body: (omitted)
Sun, 11 Dec 2011 10:49:25 GMT: DEBUG: Request out: /wm/preference-list-->1323600562085/1
          params: {"locale":"en-us","timeZone":"Europe/Dublin"}
Sun, 11 Dec 2011 10:49:29 GMT: DEBUG: willReceive: Status:500, Request:/wm/preference
Sun, 11 Dec 2011 10:49:29 GMT: DEBUG: Got HTTP 500 : Redirecting request: /wm/preference : Redirect count:2
Sun, 11 Dec 2011 10:49:29 GMT: DEBUG: --> Request 4:   POST to https://p99-mailws.icloud.com:443/wm/preference, headers: Content-Type=text/plain, body: (omitted)
Sun, 11 Dec 2011 10:49:29 GMT: DEBUG: Request out: /wm/preference-list-->1323600562085/1
          params: {"locale":"en-us","timeZone":"Europe/Dublin"}
Sun, 11 Dec 2011 10:49:33 GMT: DEBUG: willReceive: Status:500, Request:/wm/preference
Sun, 11 Dec 2011 10:49:33 GMT: DEBUG: Got HTTP 500 : Redirecting request: /wm/preference : Redirect count:3
Sun, 11 Dec 2011 10:49:33 GMT: DEBUG: --> Request 5:   POST to https://p99-mailws.icloud.com:443/wm/preference, headers: Content-Type=text/plain, body: (omitted)
Sun, 11 Dec 2011 10:49:33 GMT: DEBUG: Request out: /wm/preference-list-->1323600562085/1
          params: {"locale":"en-us","timeZone":"Europe/Dublin"}
Sun, 11 Dec 2011 10:49:37 GMT: DEBUG: willReceive: Status:500, Request:/wm/preference
Sun, 11 Dec 2011 10:49:37 GMT: DEBUG: Got HTTP 500 : Redirecting request: /wm/preference : Redirect count:4
Sun, 11 Dec 2011 10:49:37 GMT: DEBUG: --> Request 6:   POST to https://p99-mailws.icloud.com:443/wm/preference, headers: Content-Type=text/plain, body: (omitted)
Sun, 11 Dec 2011 10:49:37 GMT: DEBUG: Request out: /wm/preference-list-->1323600562085/1
          params: {"locale":"en-us","timeZone":"Europe/Dublin"}
Sun, 11 Dec 2011 10:49:40 GMT: DEBUG: willReceive: Status:500, Request:/wm/preference
Sun, 11 Dec 2011 10:49:40 GMT: DEBUG: Got HTTP 500 : Redirecting request: /wm/preference : Redirect count:5
Sun, 11 Dec 2011 10:49:40 GMT: DEBUG: --> Request 7:   POST to https://p99-mailws.icloud.com:443/wm/preference, headers: Content-Type=text/plain, body: (omitted)
Sun, 11 Dec 2011 10:49:40 GMT: DEBUG: Request out: /wm/preference-list-->1323600562085/1
          params: {"locale":"en-us","timeZone":"Europe/Dublin"}
Sun, 11 Dec 2011 10:49:44 GMT: DEBUG: willReceive: Status:500, Request:/wm/preference
Sun, 11 Dec 2011 10:49:44 GMT: DEBUG: <-- Response 7: 500 (4248ms), headers: Content-Type=text/html body: (empty)
Sun, 11 Dec 2011 10:49:44 GMT: DEBUG: Request in: /wm/preference-list-->1323600562085/1,500,4249ms
Sun, 11 Dec 2011 10:49:44 GMT: DEBUG: ServerPreferencesDataSource.retrieveResponse error = -1/500/guid=serverPrefsGuid
Sun, 11 Dec 2011 10:49:44 GMT: ERROR: CoreMail handled error 13002 before exiting Mail

Spent at least 40 min talking to apple support, to sort it out. luckly not at my cost. After trying lots of things and speaking to a higher grade support person I was given a temp password which did the trick. I then was able to reset that with my own password.
The impression i got was no one knowns what the problem is and resetting the password at the apple end works. Not sure if you would be able to self fix.

HT204075 I am not receiving mail to one of my email accounts. I can send mail from this account and all other accounts seem to be working.

I am not receiving mail to one of my email accounts. I can send mail from this account and all other accounts seem to be working.

Is this work email account on a BES server?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Sending mails from client where SAPSERVER not connected to internet.

Similar Messages

Maybe you are looking for