Sending mails with binary attachments

Hi!
I've to implement a routine for sending an email with attachments.
These attachments can be PDF- or HTML-Files. Sometimes the last of the PDF-Attachments could not be opened when receiving the mail (it can't be open in the SOST as well).
My coding is:
      loop at lt_doks.
        select single * from toadv where ar_object eq lt_doks-ar_object.
        call function 'ARCHIVOBJECT_GET_TABLE'
          exporting
            archiv_id                = lt_doks-archiv_id
            document_type            = toadv-doc_type
            archiv_doc_id            = lt_doks-arc_doc_id
          importing
            length                   = l_length
          tables
            archivobject             = l_image_tab
          exceptions
            error_archiv             = 1
            error_communicationtable = 2
            error_kernel             = 3
            others                   = 4.
        clear objpack.
        perform convert_document tables l_image_tab
                                        objbin
                                 using tab_lines_new
                                       i_pernr
                                       i_reinr
                                       l_subrc.
        if l_subrc ne 0.
          raise convert_error.
        endif.
        objpack-transf_bin = 'X'.
        objpack-head_start = 3.
        objpack-head_num = 0.
        objpack-body_start = tab_lines + 1.
        objpack-body_num = tab_lines_new.
        objpack-doc_type = toadv-doc_type.
        objpack-obj_name = 'Attachment'.
        objpack-obj_descr = lt_doks-objecttext.
        objpack-doc_size = tab_lines_new * 255."l_length.
        append objpack.
        tab_lines = tab_lines + tab_lines_new.
        clear tab_lines_new.
      endloop.
    endif.
endif.
if not document_data-obj_descr is initial.
jetzt wird's ernst -> Mail versenden
    call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      exporting
        document_data              = document_data
        put_in_outbox              = ' '
        commit_work                = 'X'
      tables
        packing_list               = objpack
        contents_txt               = daten
        contents_bin               = objbin
        receivers                  = receivers
      exceptions
        too_many_receivers         = 1
        document_not_sent          = 2
        document_type_not_exist    = 3
        operation_no_authorization = 4
        parameter_error            = 5
        x_error                    = 6
        enqueue_error              = 7
        others                     = 8.
endif.
form convert_document tables p_image_tab structure docs
                             p_objbin structure solisti1
                      using p_lines
                             p_pernr
                             p_reinr
                             p_subrc.
data: l_filename like filename-fileextern.
clear p_lines.
call function 'FILE_GET_NAME'
    exporting
      client           = sy-mandt
      logical_filename = 'Z_HRTV_CONVERT'
      operating_system = sy-opsys
      parameter_1      = p_pernr
      parameter_2      = p_reinr
    importing
      file_name        = l_filename
    exceptions
      file_not_found   = 1
      others           = 2.
if sy-subrc ne 0.
    p_subrc = sy-subrc.
    exit.
endif.
Schreiben der Datei
open dataset l_filename for output in binary mode.
loop at p_image_tab.
    transfer p_image_tab to l_filename.
endloop.
close dataset l_filename.
refresh p_image_tab.
clear p_image_tab.
Lesen der Datei
open dataset l_filename for input in binary mode.
do.
    read dataset l_filename into p_objbin.
    if sy-subrc <> 0.
      if not p_objbin is initial.
        append p_objbin.
        clear p_objbin.
        add 1 to p_lines.
      endif.
      exit.
    endif.
    append p_objbin.
    clear p_objbin.
    add 1 to p_lines.
enddo.
close dataset l_filename.
Löschen der Datei
delete dataset l_filename.
endform.                    " convert_document
Can anybody give me hint?
Thanks a lot!
Peter

Hi,
Whether your objpack-doc_type is coming correctly for the last PDF attachment?
Thanks
aRs

Similar Messages

Sending mail with multiple attachments

hi.I wrote a code to send mail.but i need to send mail with multiple attachments.here is the code i wrote.what should i do to send the mail with multiple attachments.if i run this code iam able to send mails but not attachments.please help me
<%@ page import="javax.mail.*,javax.mail.internet.*,java.util.Date,java.io.*,java.net.InetAddress,java.sql.*,java.util.Properties,java.net.*,javax.sql.*,javax.activation.*,java.util.*,java.text.*" %>
<%@ page import="java.io.*,java.sql.*,java.net.*,java.util.*,java.text.*" %>
<%
     String Attachfiles1="";
     String Attachfiles2="";
String Attachfiles3="";
if("Send".equalsIgnoreCase("send"))
          try
     String subject="",from="",url = null,to="";
     String mailhost = "our local host";
     Properties props = System.getProperties();
     String msg_txt="";
     String strStatus="";
// byte[] bin=.....;
//Adds Attechment:
Multipart multipart = new MimeMultipart();
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setText("Here are my attachments");
multipart.addBodyPart(messageBodyPart);
messageBodyPart = new MimeBodyPart();
//first attachment
DataSource source = new FileDataSource("C:\\img1.jpg");
messageBodyPart.setDataHandler(new DataHandler(source));
messageBodyPart.setFileName("C:\\Telnor1.jpg");
multipart.addBodyPart(messageBodyPart);
//Second attachment
DataSource source2 = new FileDataSource("C:\\img2.jpg");
messageBodyPart.setDataHandler(new DataHandler(source2));
messageBodyPart.setFileName("C:\\Telnor2.jpg");
multipart.addBodyPart(messageBodyPart);
//etc...
message.setContent(multipart);
Transport.send( message );
String mailer = "MyMailerProgram";
to=request.getParameter("to");
from=request.getParameter("from");
subject=request.getParameter("subject");
msg_txt=request.getParameter("message");
props.put("mail.smtp.host", mailhost);
Session mailsession = Session.getDefaultInstance(props, null);
Message message = new MimeMessage(mailsession);
message.setFrom(new InternetAddress(from));
message.setRecipients(Message.RecipientType.TO,InternetAddress.parse(to, false));
message.setSubject(subject);
message.setHeader("X-Mailer", mailer);
message.setSentDate(new Date());
message.setText(msg_txt);
BodyPart messageBodyPart = new MimeBodyPart();
BodyPart messageBodyPart2 = new MimeBodyPart();
Multipart multipart = new MimeMultipart(); // to add many part to your messge
messageBodyPart = new MimeBodyPart();
javax.activation.DataSource source = new javax.activation.FileDataSource("path of the file");
messageBodyPart.setDataHandler(new DataHandler(source));
messageBodyPart.setFileName("file_name");
messageBodyPart2.setText("message"); // set the txt message
multipart.addBodyPart(messageBodyPart);
multipart.addBodyPart(messageBodyPart2);
Transport.send(message);
out.println("Message Sent");
catch (Exception e)
e.printStackTrace();
if("Attachfiles".equalsIgnoreCase("attachfiles"))
Attachfiles1=request.getParameter("fieldname1");
Attachfiles2=request.getParameter("fieldname2");
Attachfiles3=request.getParameter("fieldname3");
%>
<html>
<body>
<div class="frame">
     <form action="Composemail.jsp" method="post">
          <b>SelectPosition:</b> <select name="cars" >
<option value="ABAP">ABAP
<option value="saab">Saab
<option value="fiat">Fiat
<option value="audi">Audi
</select><br><br>
<table border="1" cellpadding="2" cellspacing="2">
<tr><th>Name</th>
<th>EmailId</th>
<th>ContactNumber</th>
<th>Position</th>
</tr>
<tr>
<td>
</td>
</tr>
</table><br>
<b>SelectUser :</b><select name="cars">
<option value="Administrator">Administrator
<option value="saab">Saab
<option value="fiat">Fiat
<option value="audi">Audi
</select>
<br>
<b>To :</b>&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp<input type="text" name="to" size="72"><br>
<b>From :</b>&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp<input type="text" name="from" size="72"><br>
<b>Subject :</b>&nbsp&nbsp&nbsp<input type="text" name="subject" size="72"><br>
<%=Attachfiles1%><br><%=Attachfiles2%><br><%=Attachfiles3%><br><br>
<b>Message:</b><br>
&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp<textarea rows="10" cols="50" name="message">
</textarea> <br><br>
<b>AttachedFile:</b>&nbsp<input type="file" name="fieldname1" value="filename" size="50"><br><br>
<b>AttachedFile:</b>&nbsp<input type="file" name="fieldname2" value="filename" size="50"><br><br>
<b>AttachedFile:</b>&nbsp<input type="file" name="fieldname3" value="filename" size="50"><br><br>
&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp<input type="submit" name="attachfiles" value="Attachfiles">
<center>
<input type="submit" name="send" value="Send" >
</center>
</form>
</div>
</body>
</html>

Create a separate MimeBodyPart object for each attachment, rather than reusing
the same one over and over.

Sending mail with multiple attachments in jsp

hi .I wrote a code to send a mail in jsp.but now i need to send mails with multiple attachments.how can i send mail with multiple attachment.

Create a separate MimeBodyPart object for each attachment, rather than reusing
the same one over and over.

Sending mail with 2 attachments

Hi All,
        I have a requirement where I have to send a mail with 2 attachments. Both attachments should be excel sheets.
Iam using the function module
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      document_data              = gd_doc_data
      put_in_outbox              = 'X'
      commit_work                = 'X'
    IMPORTING
      sent_to_all                = gd_sent_all
    TABLES
      packing_list               = it_packing_list
      contents_txt               = it_message
     contents_bin               = it_attachment
      receivers                  = it_receivers
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      document_type_not_exist    = 3
      operation_no_authorization = 4
      parameter_error            = 5
      x_error                    = 6
      enqueue_error              = 7
      OTHERS                     = 8.
I don't know where to pass another attachment.
How can it be done?
Kindly help me.
Regards,
Krithika

Hi,
Try this code.
you have to populate both packing_list and contents_bin internal tables before passing to the fm SO_NEW_DOCUMENT_ATT_SEND_API1
FORM CONVERT_OTF_TO_PDF TABLES OTFTAB STRUCTURE OTF.
CLEAR: SOOD, W_LINES, CONTENT_IN, CONTENT_OUT.
REFRESH: CONTENT_IN, CONTENT_OUT.
DESCRIBE TABLE OTFTAB LINES W_LINES.
SOOD-OBJLEN = W_LINES.
REFRESH: CONTENT_IN, CONTENT_OUT.
CLEAR: CONTENT_IN, CONTENT_OUT.
   CONTENT_IN[] = OTFTAB[].
    CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PDF'
         EXPORTING
              FORMAT_SRC      = 'OTF'
              FORMAT_DST      = 'PDF'
              DEVTYPE         = 'HPLJ5SI'
*         FUNCPARA        =
              LEN_IN          = SOOD-OBJLEN
*    IMPORTING
*         LEN_OUT         =
         TABLES
              CONTENT_IN      = CONTENT_IN
              CONTENT_OUT     = CONTENT_OUT
         EXCEPTIONS
              ERR_CONV_FAILED = 1
              OTHERS          = 2.
REFRESH OBJBIN. CLEAR OBJBIN.
IF GV_SUMMARY <> 'X'.
    OBJBIN[] = CONTENT_OUT[].
ELSE.
    REFRESH CONTENT_OUT.
    CLEAR CONTENT_OUT.
ENDIF.
REFRESH: CONTENT_IN, OBJPACK.
CLEAR: CONTENT_IN, OBJPACK.
DOC_CHNG-OBJ_NAME = TEXT-003.
IF SY-SYSID NE 'S4P'.
   IF DOC_CHNG-OBJ_DESCR IS INITIAL.
      DOC_CHNG-OBJ_DESCR = TEXT-004.
    ELSE.
      IF GV_SUMMARY = 'X'.
       DOC_CHNG-OBJ_DESCR = TEXT-012.
      ENDIF.
    ENDIF.
ENDIF.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
* Fill the fields of the packing_list for the main document:
    CLEAR OBJPACK.
    DESCRIBE TABLE OBJBIN LINES TAB_LINES.
   OBJPACK-TRANSF_BIN = 'X'.
    OBJPACK-HEAD_START = 1.
    OBJPACK-HEAD_NUM = 0.
    OBJPACK-BODY_START = 1.
    OBJPACK-BODY_NUM = TAB_LINES.
    OBJPACK-DOC_TYPE = 'XLS'.
    OBJPACK-OBJ_NAME = 'Attachment'.
    OBJPACK-OBJ_DESCR = C_PAYER.
    READ TABLE OBJBIN INDEX TAB_LINES.
    DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJBIN ).
    OBJPACK-DOC_SIZE = DOC_SIZE.
    APPEND OBJPACK.
    CLEAR OBJPACK.
    DESCRIBE TABLE OBJBIN LINES TAB_LINES.
   OBJPACK-TRANSF_BIN = 'X'.
    OBJPACK-HEAD_START = 1.
    OBJPACK-HEAD_NUM = 0.
    OBJPACK-BODY_START = 1.
    OBJPACK-BODY_NUM = TAB_LINES.
    OBJPACK-DOC_TYPE = 'XLS'.
    OBJPACK-OBJ_NAME = 'Attachment'.
    OBJPACK-OBJ_DESCR = C_PAYER.
    READ TABLE OBJBIN INDEX TAB_LINES.
    DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJBIN ).
    OBJPACK-DOC_SIZE = DOC_SIZE.
    APPEND OBJPACK.
    REFRESH RECLIST.
    CLEAR RECLIST.
** get E-mail address
      IF NOT P_EMAIL IS INITIAL.
        RECIPIENT_INT-ADDRESS = P_EMAIL.
      ENDIF.
        RECLIST-RECEIVER = RECIPIENT_INT.
        RECLIST-REC_TYPE = 'U'.
        APPEND RECLIST.
* SEND THE DOCUMENT BY CALLING THE SAPOFFICE API1 MODULE
* FOR SENDING DOCUMENTS WITH ATTACHMENTS
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       EXPORTING
            DOCUMENT_DATA              = DOC_CHNG
            PUT_IN_OUTBOX              = 'X'
       IMPORTING
            SENT_TO_ALL                = SENT_TO_ALL
       TABLES
            PACKING_LIST               = OBJPACK
            OBJECT_HEADER              = OBJHEAD
            CONTENTS_BIN               = OBJBIN
            CONTENTS_TXT               = OBJTXT
            RECEIVERS                  = RECLIST
       EXCEPTIONS
            TOO_MANY_RECEIVERS         = 1
            DOCUMENT_NOT_SENT          = 2
            OPERATION_NO_AUTHORIZATION = 4
           OTHERS                     = 99.
Regards,
Sailaja.

Send mail with 2 attachments

Hi all,
I need to send an email with 2 attachments: 1 is a sapscript converted into PDF, and the other one is an Excel sheet.
Is it possible?
I think I almost have it, with function SO_NEW_DOCUMENT_ATT_SEND_API1, and table field pack_list-head_start, but I can see the PDF and not the Excel.
Thanks in advance,
Rafael Llabré

This is possible, however for every attachment you need for example a new pack list. So the thing you do for ONE attachment has to be repeated for every new attachment.
have a look at this thread:
https://forums.sdn.sap.com/click.jspa?searchID=10795451&messageID=4850757
Edited by: Micky Oestreich on Apr 16, 2008 10:03 AM

I can't send mail with my google apps account using mail

Can anyone help me here.
My Mail program is acting strangely.
First I could send email but not with an attachment. Now I cant send at all. I am using a Google Apps Email account. It was working fine yesterday.
I also have an iCloud @me.com account which sends mail with the attachments but the sent mail is not showing up in the sent items box.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
 Cheers, Tom

How to send mail with attachments - ALBPM 5.7

Hi All,
I am new to BPM,
Someone could help giving me a example of Send Mail with attachments in Aqualogic Studio 5.7?
thanks,
Renata

nombrefichero="C:\\Temp\\test.doc"
subject as String="Subject"
message as String="Message"
mailAttachment = Fuego.Net.MailAttachment(source : BinaryFile.readToBinaryFrom(name : nombrefichero), fileName : "test2.doc")
mailAttachments[0] = mailAttachment
correo as Mail
correo.attachments = mailAttachments
correo.contentType = "text/html"
send correo
using from = "[email protected]",
recipient = "[email protected]",
subject = subject,
message = message

Receiving mail, but can't send mail with attachments?

Hello,
I can't send mails anymore, I have been able to send some without any attachments (i.e. reply doesn't work as it automatically attaches the original text). This started 3 days ago. Also, my mail doesn't seem to recognize powerpoint and word docs., but I a know the people who have send me such files do not have VISTA. When I choose "open with" then it works. So I have 2 problems, one being moe urgent then the other.
1) can't send mail with attachments
2) .doc (word), .pps (powerpoint)attachments are not always recognized.
thank you all!!!

Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if it then works

Sending mails with attachments using oracle 8i

Hi,
Could anybody please send a sample code for sending mails
with attachments using oracle 8i.
Thanks in advance

For oracle8i there is an example package from OTN:
http://www.oracle.com/technology/sample_code/tech/pl_sql/htdocs/Utl_Smtp_Sample.html
You have to re-write the package a bit to work it with BLOBs instead of RAW attachments, but that should be no problem
Hop this helps,
Michiel

Problem sending mail with attachments???

Hi Everybody,
I have got a problem sending mail with attachments...
I am able to send a plain mail ... but when i am trying to send mail along with an attachment ... its not being sent....
its not showing any error it is simply hanging...
what should i do?
If u know any solns please do suggest me....
Thanks in advance

activation.jar is already there...
initially i wrote a swing program as a front end and it was working abs fine... in my sense it was properly sending mails along with the attachments...
when i changed the front-end to JSP handled by Servlets i am getting a problem...
and even the swing program stopped working ...
now swing program is getting compiled but it is hanging at run time showing an exception "Exception occured during event dispatching"
i dont understand what probably may be the problem...
if u can trace out, please give me any suggestions
Thanks in advance and regards

Sending mail with multiple attachment

hi.
i want to send mail with multiple attachment.
i m succeed in sending multiple attachment but the second pdf is not open.
its given error like "This file is damaged and could not be open.
pls check my code. and
give the solution....
point should be assured...........
hope all u r understand my problem..
& tell me where is i m missing something.
REPORT YSDPASALE1_MAIL LINE-SIZE 110.
data : year_month(6) type c.
data : from_date like sy-datum,to_date like sy-datum.
INITIALIZATION.
year_month = sy-datum+0(6).
CONCATENATE year_month '01' into from_date.
to_date = sy-datum.
ranges : temp for mkpf-budat.
temp-low = from_date.
temp-high = to_date.
append temp to temp.
DATA: P_JOBCNT LIKE TBTCJOB-JOBCOUNT,
       jobname like TBTCJOB-JOBNAME,
       L_RELEASE(1) TYPE c.
CONSTANTS : l_c_device(4)    VALUE 'LOCL'.
DATA : t type i value 0.
DATA : p_email1 like somlreci1-receiver,
        p_sender LIKE somlreci1-receiver.
Data Declaration
DATA: gd_recsize TYPE i,gd_recsize1 TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
        INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
      wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
      gd_eventparm LIKE tbtcm-eventparm,
      gd_external_program_active LIKE tbtcm-xpgactive,
      gd_jobcount LIKE tbtcm-jobcount,
      gd_jobname LIKE tbtcm-jobname,
      gd_stepcount LIKE tbtcm-stepcount,
      gd_error    TYPE sy-subrc,
      gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
      it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      it_mess_att1 LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      it_mess_att2 LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      gd_sender_type     LIKE soextreci1-adr_typ,
      gd_attachment_desc TYPE so_obj_nam,
      gd_attachment_desc1 TYPE so_obj_nam,
      gd_attachment_name TYPE so_obj_des,
      gd_mtitle LIKE sodocchgi1-obj_descr.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
      gd_destination LIKE rlgrap-filename,
      gd_bytecount LIKE tst01-dsize,
      gd_buffer TYPE string.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
           c_no(1)     TYPE c   VALUE ' ',
           c_device(4) TYPE c   VALUE 'LOCL'.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
        INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
DATA: BEGIN OF mailstr OCCURS 0,
        p_email like somlreci1-receiver,
      END OF mailstr.
DATA: mailtab like STANDARD TABLE OF mailstr WITH HEADER LINE.
DATA: ypp18tab like STANDARD TABLE OF mailstr WITH HEADER LINE,
      ymis008tab like STANDARD TABLE OF mailstr WITH HEADER LINE,
      ysd15tab like STANDARD TABLE OF mailstr WITH HEADER LINE,
      ymis10tab like STANDARD TABLE OF mailstr WITH HEADER LINE.
SUBMIT YSDPASALE1 with bdt in temp
                       to sap-spool
                      with line-size = '255'
                       with KEEP_IN_SPOOL = 'X'
                       with IMMEDIATELY = ' '
                       WITHOUT SPOOL DYNPRO
                       AND RETURN
   NEW-PAGE PRINT ON
   DESTINATION l_c_device
   IMMEDIATELY ' '
   KEEP IN SPOOL 'X'
   NEW LIST IDENTIFICATION 'X'
   NO DIALOG.
   new-page print off.
IF sy-batch EQ 'X'.
    PERFORM get_job_details.
    PERFORM obtain_spool_id.
    PERFORM convert_spool_to_pdf.
    select yemail as p_email into CORRESPONDING FIELDS OF TABLE ymis008tab
      from ymail
      where ytcode = 'YMIS008'.
ELSE.
   SKIP.
   WRITE:/ 'Program must be executed in background in-order for spool & mail sending',
           'request to be created.'.
ENDIF.
wait up to 3 seconds.
submit YSD_MONTHLY_SALES
                            USING SELECTION-SET 'MAIL'
                            to sap-spool
                           with KEEP_IN_SPOOL = 'X'
                           with IMMEDIATELY = ' ' "SPACE
                           WITHOUT SPOOL DYNPRO
                           AND RETURN
   NEW-PAGE PRINT ON
   DESTINATION l_c_device
   IMMEDIATELY ' '
   KEEP IN SPOOL 'X'
   NEW LIST IDENTIFICATION 'X'
   NO DIALOG.
   new-page print off.
    IF sy-batch EQ 'X'.
    gd_attachment_desc1 = 'YMIS10'.
    gd_mtitle = 'Monthly Sales Report'.
    PERFORM get_job_details.
    PERFORM obtain_spool_id.
    PERFORM convert_spool_to_pdf1.
   loop at it_mess_att.
    move it_mess_att1 to it_mess_att.
    APPEND it_mess_att.
   endloop.
   APPEND LINES OF it_mess_att1 to it_mess_att.
   free it_mess_att1.
    it_mess_att[] = it_mess_att1[].
    insert LINES OF it_mess_att1 into it_mess_att.
    APPEND LINES OF it_mess_att2 to it_mess_att .
     insert LINES OF it_mess_att1 into it_mess_att.
     insert LINES OF it_mess_att2 into it_mess_att.
   loop at ymis008tab into mailstr.
     p_email1 = mailstr-p_email.
      p_email1 = '[email protected]'.
       PERFORM process_email.
   endloop.
       clear mailstr.
      wait up to 5 seconds.
      SUBMIT rsconn01 WITH mode   = 'INT'
                      WITH output = 'X'
                      AND RETURN.
ELSE.
    SKIP.
ENDIF.
      FORM obtain_spool_id                                          *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
                 INTO TABLE it_tbtcp
                 WHERE      jobname     = gd_jobname
                 AND        jobcount    = gd_jobcount
                 AND        stepcount   = gd_stepcount
                 AND        listident   <> '0000000000'
                 ORDER BY   jobname
                            jobcount
                            stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
    message s004(zdd) with gd_spool_nr.
    gd_spool_nr = wa_tbtcp-listident.
    MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
    MESSAGE s005(zdd).
ENDIF.
ENDFORM.
      FORM get_job_details                                          *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
       IMPORTING
            eventid                 = gd_eventid
            eventparm               = gd_eventparm
            external_program_active = gd_external_program_active
            jobcount                = gd_jobcount
            jobname                 = gd_jobname
            stepcount               = gd_stepcount
       EXCEPTIONS
            no_runtime_info         = 1
            OTHERS                  = 2.
ENDFORM.
      FORM convert_spool_to_pdf                                     *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
       EXPORTING
            src_spoolid              = gd_spool_nr
            no_dialog                = c_no
            dst_device               = c_device
       IMPORTING
            pdf_bytecount            = gd_bytecount
       TABLES
            pdf                      = it_pdf_output
       EXCEPTIONS
            err_no_abap_spooljob     = 1
            err_no_spooljob          = 2
            err_no_permission        = 3
            err_conv_not_possible    = 4
            err_bad_destdevice       = 5
            user_cancelled           = 6
            err_spoolerror           = 7
            err_temseerror           = 8
            err_btcjob_open_failed   = 9
            err_btcjob_submit_failed = 10
            err_btcjob_close_failed = 11
            OTHERS                   = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
    TRANSLATE it_pdf_output USING ' ~'.
    CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
    it_mess_att = gd_buffer.
    APPEND it_mess_att.
    SHIFT gd_buffer LEFT BY 255 PLACES.
    IF gd_buffer IS INITIAL.
      EXIT.
    ENDIF.
ENDDO.
ENDFORM.
FORM convert_spool_to_pdf1.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
       EXPORTING
            src_spoolid              = gd_spool_nr
            no_dialog                = c_no
            dst_device               = c_device
       IMPORTING
            pdf_bytecount            = gd_bytecount
       TABLES
            pdf                      = it_pdf_output
       EXCEPTIONS
            err_no_abap_spooljob     = 1
            err_no_spooljob          = 2
            err_no_permission        = 3
            err_conv_not_possible    = 4
            err_bad_destdevice       = 5
            user_cancelled           = 6
            err_spoolerror           = 7
            err_temseerror           = 8
            err_btcjob_open_failed   = 9
            err_btcjob_submit_failed = 10
            err_btcjob_close_failed = 11
            OTHERS                   = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
    TRANSLATE it_pdf_output USING ' ~'.
    CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
    it_mess_att1 = gd_buffer.
    APPEND it_mess_att1.
    SHIFT gd_buffer LEFT BY 255 PLACES.
    IF gd_buffer IS INITIAL.
      EXIT.
    ENDIF.
ENDDO.
ENDFORM.
      FORM process_email                                            *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
DESCRIBE TABLE it_mess_att1 LINES gd_recsize1.
CHECK gd_recsize > 0 or gd_recsize1 > 0.
PERFORM send_email." USING p_email1.
perform send_email using p_email2.
ENDFORM.
      FORM send_email                                               *
--> p_email                                                       *
FORM send_email." USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject         = 'Subject'.
gd_attachment_desc = gd_attachment_desc1 .
gd_attachment_desc = 'YPP18 - Daily Highlights'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod        = 'Dear Sir,'.
APPEND it_mess_bod.
it_mess_bod        = ' '.
APPEND it_mess_bod.
it_mess_bod        = ' '.
APPEND it_mess_bod.
it_mess_bod        = 'kindly find the attached document'.
APPEND it_mess_bod.
it_mess_bod        = ' '.
APPEND it_mess_bod.
it_mess_bod        = 'Do not reply on this mail, It is generated from SAP'.
APPEND it_mess_bod.
it_mess_bod        = ' '.
APPEND it_mess_bod.
it_mess_bod        = ' '.
APPEND it_mess_bod.
it_mess_bod        = 'Regards,'.
APPEND it_mess_bod.
it_mess_bod        = 'Arpit Shah'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
    gd_sender_type = space.
ELSE.
    gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
                               tables it_mess_bod
                                      it_mess_att
                                      it_mess_att1
                                using "p_email
                                      gd_mtitle
                                     'Testing mail generated from SAP'
                                     'Daily Highlights Abstract Report - YPP18'
                                      'PDF'
                                      gd_attachment_name
                                      gd_attachment_desc
                                      p_sender
                                      gd_sender_type
                             changing gd_error
                                      gd_reciever.
ENDFORM.
*&      Form SEND_FILE_AS_EMAIL_ATTACHMENT
      Send email
FORM send_file_as_email_attachment tables it_message
                                          it_attach
                                          it_attach1
                                    using "p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription
                                          p_sender_address
                                          p_sender_addres_type
                                 changing p_error
                                          p_reciever.
DATA: ld_error    TYPE sy-subrc,
        ld_reciever TYPE sy-subrc,
        ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_email LIKE somlreci1-receiver,
        ld_format TYPE so_obj_tp ,
        ld_attdescription TYPE so_obj_nam ,
        ld_attfilename TYPE so_obj_des ,
        ld_sender_address LIKE soextreci1-receiver,
        ld_sender_address_type LIKE soextreci1-adr_typ,
        ld_receiver LIKE sy-subrc.
data:   t_packing_list like sopcklsti1 occurs 0 with header line,
        t_contents like solisti1 occurs 0 with header line,
        t_receivers like somlreci1 occurs 0 with header line,
        t_attachment like solisti1 occurs 0 with header line,
        t_object_header like solisti1 occurs 0 with header line,
        w_cnt type i,
        w_sent_all(1) type c,
        w_doc_data like sodocchgi1,w_doc_data1 like sodocchgi1.
ld_email   = p_email.
ld_mtitle = p_mtitle.
ld_format              = p_format.
ld_attdescription      = p_attdescription.
ld_attfilename         = p_filename.
ld_sender_address      = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data1-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
For 2nd Attachments
* Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach1 INDEX w_cnt.
w_doc_data-doc_size = w_doc_data1-doc_size +
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach1 ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
APPEND LINES OF it_attach1 to t_attachment.
t_attachment[] = it_attach1[].
APPEND LINES OF it_attach1 to t_attachment.
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
DESCRIBE TABLE it_mess_att LINES t_packing_list-body_num.
DESCRIBE TABLE it_attach LINES t_packing_list-body_num.
t_packing_list-doc_type   = ld_format.
t_packing_list-obj_descr = 'YMIS008'."ld_attdescription.
t_packing_list-obj_name   = 'YMIS008'."ld_attfilename.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
clear t_packing_list.
for 2 attachments
data : a type i,b type i.
   a = t_packing_list-body_num.
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 0.
t_packing_list-body_start = a + 1. "1
DESCRIBE TABLE it_mess_att1 LINES t_packing_list-body_num.
DESCRIBE TABLE it_attach1 LINES t_packing_list-body_num.
t_packing_list-doc_type   = ld_format.
t_packing_list-obj_descr = 'YMIS10'."ld_attdescription.
t_packing_list-obj_name   = 'YMIS10'."ld_attfilename.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
a = t_packing_list-body_num.
clear t_packing_list.
* Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 1.
t_packing_list-body_start = a + 1.
t_packing_list-body_num = t_packing_list-body_num + 1.
DESCRIBE TABLE it_mess_att1 LINES t_packing_list-body_num.
t_packing_list-body_num = a + t_packing_list-body_num .
t_packing_list-doc_type   = ld_format.
t_packing_list-obj_descr = 'YMIS10'."ld_attdescription.
t_packing_list-obj_name   = 'YMIS10'."ld_attfilename.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
loop at ymis008tab into mailstr.
t_receivers-receiver = mailstr-p_email. "ld_email.
t_receivers-receiver = p_email1.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'. "X   "Read Acknoledgement
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
endloop.
   CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = w_doc_data
            put_in_outbox              = 'X'
            sender_address             = ld_sender_address
            sender_address_type        = ld_sender_address_type
            commit_work                = 'X'
       IMPORTING
            sent_to_all                = w_sent_all
       TABLES
            packing_list               = t_packing_list
            contents_bin               = t_attachment
            contents_txt               = it_message
            receivers                  = t_receivers
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
    ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Rgds.
Arpit

Hi Arpit,
Take a look at the documentation of FM 'SO_DOCUMENT_SEND_API1' for parameter PACKING_LIST. I think you should set t_packing_list-head_num to a different value than 0 for the second attachment.
Regards,
John.

Help regd in sending mails with attachment

Hi All,
I have a requirement to send mails with attachements.The attachments can be simple word , excel anything. Please help.Is there a way I can send these from workflows also?

hi use this , this is one of the best examples for sending mail ....
1. We can send files with attachment.
However, There is some trick involved
in the binary files.
2. I have made a program (and it works fantastic)
ONLY 6 LINES FOR EMAILING
BELIEVE ME
ITS A FANTASTIC PROGRAM.
IT WILL WORK LIKE OUTLOOK EXPRESS !
3. The user is provided with
a) file name
b) email address to send mail
and it sends ANY FILE (.xls,.pdf .xyz..)
Instantaneously !
4. Make two things first :
1. Include with the name : ZAMI_INCLFOR_MAIL
2. Report with the name : ZAM_TEMP147 (any name will do)
3. Activate both and execute (2)
4. After providing filename, email adress
5. Code for Include :
10.08.2005 Amit M - Created
Include For Mail (First Req F16)
Modification Log
Data
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
FORM
FORM ml_customize USING objname objdesc.
Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
Header Data
Already Done Thru FM
Main Text
Already Done Thru FM
Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
Receiver List
Already done thru fm
ENDFORM. "ml_prepare
FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
Data
DATA : pos TYPE i.
DATA : len TYPE i.
Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
CODE FOR PROGRAM
5.
REPORT zam_temp147 .
INCLUDE zami_inclfor_mail.
DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
EXTENSION = extension
NAME = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
regards,
venkat.

Sending mail with excel attachment-improper format

Dear experts,
I am sending a mail to outlook with an excel attachment. The mail is sent with attachment and the data, but all in one cell.
I am using SO_NEW_DOCUMENT_ATT_SEND_API1. What parameters do i need to manipulate to have data in different columns of excel? I am using "packing_list" table of FM. But dont know the exact parameters to be passed. Can anyone help with the same please?
Best regards and thanks!
Sumit Nene.

Hello Sumit,
I am using same function module to send mail with excel attachment.
Below I am attaching my own code for your reference.
Data which u want to add in excel file is maintain in IT_OBJBIN i.e. document information.
CLEAR :IMESSAGE,IT_OBJBIN,IT_OBJPACK,IT_RECLIST.
REFRESH: IMESSAGE[ ] , IT_OBJBIN[ ] , IT_OBJPACK[ ] , IT_RECLIST[ ].
" populate the text for body of the mail
CLEAR WA_IMESSAGE.
CONCATENATE    'Board : ' P_BOARD ':' 'Please find the excel attached for the list of Material whose routing is created'   INTO WA_IMESSAGE-LINE.
APPEND WA_IMESSAGE TO IMESSAGE.
"document information
W_DOC_CHNG-OBJ_NAME = 'Excel'.
IF NOT P_BOARD IS INITIAL.
    CONCATENATE    'Board : ' P_BOARD ':' 'List Of Routing Materials' INTO W_DOC_CHNG-OBJ_DESCR.
ELSE.
    CONCATENATE     'List Of' ' Routing Materials' INTO W_DOC_CHNG-OBJ_DESCR.
ENDIF.
W_DOC_CHNG-SENSITIVTY = 'F'. " ->Functional object
" displaying material , plant in the excel
CONCATENATE 'BOARD NO : ' P_BOARD INTO WA_OBJBIN.
APPEND WA_OBJBIN TO IT_OBJBIN.
CONCATENATE 'MATERIAL' 'PLANT' 'DESCRIPTION' INTO WA_OBJBIN SEPARATED BY C_TAB.
CONCATENATE C_RET WA_OBJBIN INTO WA_OBJBIN.
APPEND WA_OBJBIN TO IT_OBJBIN.
CLEAR : WA_OBJBIN.
LOOP AT IT_DOWNLOAD INTO WA_DOWNLOAD. "It_orders is the internal table to be transferred to excel
    CONCATENATE WA_DOWNLOAD-MATNR WA_DOWNLOAD-WERKS WA_DOWNLOAD-DESC INTO WA_OBJBIN SEPARATED BY C_TAB.
    CONCATENATE C_RET WA_OBJBIN INTO WA_OBJBIN.
    APPEND WA_OBJBIN TO IT_OBJBIN.
ENDLOOP.
DESCRIBE TABLE IT_OBJBIN LINES V_LINES_BIN.   " no of lines for excel data
" pack the data as RAW
CLEAR WA_IT_OBJPACK-TRANSF_BIN.                     "Obj. to be transported not in binary form
WA_IT_OBJPACK-HEAD_START = 1.                   "Start line of object header in transport packet
WA_IT_OBJPACK-HEAD_NUM = 0.                     "Number of lines of an object header in object packet
WA_IT_OBJPACK-BODY_START = 1.                   "Start line of object contents in an object packet
WA_IT_OBJPACK-BODY_NUM = MESSAGE_LINES.         "Number of lines of the mail body
WA_IT_OBJPACK-DOC_TYPE = 'RAW'.
APPEND WA_IT_OBJPACK TO IT_OBJPACK.
" pack the data as excel
WA_IT_OBJPACK-TRANSF_BIN = 'X'.
WA_IT_OBJPACK-HEAD_START = 1.
WA_IT_OBJPACK-HEAD_NUM = 1.
WA_IT_OBJPACK-BODY_START = 1.
WA_IT_OBJPACK-BODY_NUM = V_LINES_BIN.         "no of lines of it_orders to give no of unprocessed orders
WA_IT_OBJPACK-DOC_TYPE = 'XLS'.   " -> excel fomat
WA_IT_OBJPACK-OBJ_NAME = 'EXCEL ATTACHMENT'.
" attachment name
IF NOT P_BOARD IS INITIAL.
    CONCATENATE P_BOARD '.XLS' INTO WA_IT_OBJPACK-OBJ_DESCR.
ELSE.
    CONCATENATE 'LIST' '.XLS' INTO WA_IT_OBJPACK-OBJ_DESCR.
ENDIF.
WA_IT_OBJPACK-DOC_SIZE = V_LINES_BIN * 255.
APPEND WA_IT_OBJPACK TO IT_OBJPACK.
" creating email id
DATA: STR1 TYPE STRING,
      STR2 TYPE STRING,
      STR3 TYPE STRING,
      ITAB TYPE TABLE OF STRING.
DATA : WA_I LIKE LINE OF ITAB.
SPLIT P_EMAIL AT ',' INTO: TABLE ITAB.
e-mail receivers.
CLEAR WA_IT_RECLIST.
LOOP AT ITAB INTO WA_I.
    WA_IT_RECLIST-RECEIVER = WA_I.
WA_IT_RECLIST-RECEIVER = V_MAILADDR.
    WA_IT_RECLIST-EXPRESS = 'X'.
    WA_IT_RECLIST-REC_TYPE = 'U'. "-> Internet address
    APPEND WA_IT_RECLIST TO IT_RECLIST.
    CLEAR WA_IT_RECLIST.
ENDLOOP.
" sending mail
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      DOCUMENT_DATA                    = W_DOC_CHNG
     PUT_IN_OUTBOX                    = 'X'
     COMMIT_WORK                      = 'X'
   IMPORTING
     SENT_TO_ALL                      =
     NEW_OBJECT_ID                    =
    TABLES
      PACKING_LIST                     = IT_OBJPACK
     OBJECT_HEADER                    =
     CONTENTS_BIN                      = IT_OBJBIN
     CONTENTS_TXT                      = IMESSAGE
     CONTENTS_HEX                     =
     OBJECT_PARA                      =
     OBJECT_PARB                      =
      RECEIVERS                        = IT_RECLIST
   EXCEPTIONS
     TOO_MANY_RECEIVERS               = 1
     DOCUMENT_NOT_SENT                = 2
     DOCUMENT_TYPE_NOT_EXIST          = 3
     OPERATION_NO_AUTHORIZATION       = 4
     PARAMETER_ERROR                  = 5
     X_ERROR                          = 6
     ENQUEUE_ERROR                    = 7
     OTHERS                           = 8
COMMIT WORK.
IF SY-SUBRC = 0.
    MESSAGE I001 WITH 'Routing is Created for Board' P_BOARD 'and Mail send on e-mail id :' P_EMAIL.
ENDIF.

Sending Mail with an Attachment

Hi
I'm trying to send mail with a PDF attached. I've been set up on exchange server 2007... Sending mail without an attachment works fine.
Was wondering if anyone knows if this is a known issue or if I'm simply doing something wrong. The attachment has sent fine using Outlook web access... So it's not a problem with our connection.
Cheers
Lucy

Ditto to the comments on configuring EWS to deal with larger attachments. The instructions to do this are, unfortunately, very confusing as some configuration items are in MB and some are in KB and some are in bytes!
I worked with our sys admins to get this running, I knew things were better when I could send large attachments with Entourage Web Services Edition. I am still having occasional problems with large attachments not being sendable with Mail.app. I am hoping that 10.6.1 might tweak something to fix this?
The link we used for information is here:
http://ministry-it.blogspot.com/2009/08/entourage-ews-attachment-limits.html
While you are at it, you may want to have them check attachment limits for Outlook Web Access (OWA) if you find yourself using that and get bitten by the same 5 MB limit issue. Note that OWA and EWS have separate settings and are changed in different ways!
http://technet.microsoft.com/en-us/library/aa996835.aspx
Good luck
-- Alex

Sending email with multiple attachments

Hi forum,
I am able to send email with a single attachment using maildemo.sql from: http://www.oracle.com/technology/sample_code/tech/pl_sql/htdocs/Utl_Smtp_Sample.html
But now I am trying to send email with more than 1 attachment and it does not work. My code that calls the above mentioned package is as follows:
<code>
PROCEDURE send (
psender VARCHAR2,
precipients VARCHAR2,
pcc VARCHAR2,
pbcc VARCHAR2,
psubject VARCHAR2,
pmessage VARCHAR2,
pnumattach NUMBER) -- The number of attachments that need to be sent
IS
p_blob BLOB;
p_filename VARCHAR2(200);
p_filetype VARCHAR2(200);
p_currSeq NUMBER;
conn utl_smtp.CONNECTION;
i NUMBER;
j NUMBER;
len NUMBER;
BEGIN
IF pnumattach > 1
THEN
conn := SEND_EMAIL_HELPER.begin_mail(
          sender => psender,
          recipients => precipients,
          subject => psubject,
          mime_type => send_email_helper.MULTIPART_MIME_TYPE);
j := 0;
SELECT seq_attach_transact_id.CURRVAL INTO p_currSeq FROM dual; -- seq_attach_transact_id is a primary key that identifies every single attachment in the table
WHILE (j < pnumattach) LOOP
p_currSeq := p_currSeq - j;
SELECT blob_content INTO p_blob FROM wwdoc_document WHERE transaction_id = p_currSeq;
SELECT name INTO p_filename FROM wwdoc_document WHERE transaction_id = p_currSeq;
SELECT mime_type INTO p_filetype FROM wwdoc_document WHERE transaction_id = p_currSeq;
SEND_EMAIL_HELPER.begin_attachment(
conn => conn,
mime_type => p_filetype,
inline => TRUE,
filename => p_filename,
transfer_enc => 'base64');
-- split the Base64 encoded attachment into multiple lines
i := 1;
len := DBMS_LOB.getLength(p_blob);
WHILE (i < len) LOOP
IF(i + SEND_EMAIL_HELPER.MAX_BASE64_LINE_WIDTH < len)THEN
UTL_SMTP.Write_Raw_Data (conn,
UTL_ENCODE.Base64_Encode(
DBMS_LOB.SUBSTR(p_blob, SEND_EMAIL_HELPER.MAX_BASE64_LINE_WIDTH, i)));
ELSE
UTL_SMTP.Write_Raw_Data (conn,
UTL_ENCODE.Base64_Encode(
DBMS_LOB.SUBSTR(p_blob, (len - i)+1, i)));
END IF;
UTL_SMTP.Write_Data(conn, UTL_TCP.CRLF);
i := i + SEND_EMAIL_HELPER.MAX_BASE64_LINE_WIDTH;
END LOOP;
SEND_EMAIL_HELPER.end_attachment(conn => conn);
END LOOP;
SEND_EMAIL_HELPER.attach_text(
conn => conn,
data => pmessage,
mime_type => 'text/html');
SEND_EMAIL_HELPER.end_mail( conn => conn );
ELSE
utl_mail.send(psender,precipients,pcc,pbcc,psubject,pmessage);
END IF;
END send;
</code>
Can anyone please tell me where am i going wrong.
Message was edited by:
Monk

The easiest is to send an e-mail with multiple attachments to yourself and then view the message in raw to see how it is formatted - how the boundaries work. what the boundary headers are, etc.
Then you use that as a template for your PL/SQL code to generate a MIME body for an e-mail that has multiple attachments.
To debug.. have your PL/SQL code send sample e-mails with multiple attachment to your account, view it in raw format and compare that to the original format you've based your template on.
And none of this is really a PL/SQL issue.. it is all about formatting a valid MIME message for an e-mail.

Sending mails with binary attachments

Similar Messages

Maybe you are looking for