Sending material from one subcontracting vendor to another vendor
Hi Experts
we have a scenario we have more than one subcontracting vendors.so the unused raw material should be send to one vendor to another.so how can we configure it.please give me feedback.
Thanks in advance...
Hi Madhu ,
What do u mean sending unused material from one vendor to another ?
In subcontracting u can send material to only one vendor at a time.
Regards
Ramesh Ch
Similar Messages
-
Can I send data from one icloud account to another
Can I send spreedsheets from one icloud account to another?
Have you tried attaching them to an email?
-
Transfer material from one storage location to another storage location
Is there any bapi to transfer material from one storage location to another storage location
Hi,
You need to use the below BAPI
BAPI_GOODSMVT_CREATE
Regards
Sudheer -
Is it possible to send varient from one client 800 to another client 810
hi
is it possible to send varient from one client 800 to another client 810,
could u plz explain clearly,Hi,
You can use the transport mechanism to transport variant.
Go to SE38, type in the report name and choose "Variants". Then select the variant and choose the menu Utilities -> Transport request. Add the variant to an existing transport.
Then use the standard procedures to move the transport request from client to client.
Hope this helps (please reward me if it does).
regards, Joerg -
Send parameter from one script logic to another. SAP BPC 7.5 NW.
Hello!
Before i start, want to apologize for my English.
We work on SAP BPC 7.5 for NetWeaver.
In general, we want to send parameter from one Script logic file to another script logic file.
I will explain why :
1. We have parametr like %C_CATEGORY_SET% (and another four parameter, like groups, currency and etc.) that work on one script(next, i will named it A_Script).
We will send this parametr from BPC EXCEL (we will create button, then use command MNU_eData_SelectPackage(we also set parameters) and run package that we need, also before we set script for this package by the SAP Guide. We send some data, and this A_Script work good. Everything that we want from this script work correctly. )
2. Next we create another script(B_Script) , and we want use %C_CATEGORY_SET%, but we don't know how use this parametr, if we will just write this parametr on Script Logic, apears error ("C_CATEGORYDATAVALUE" is not assigned to the Data Administrator). We try to solve this problem by using System_Constants.lgf, but we get error.
Code:
*DIM C_CATEGORY WHAT=%C_CATEGORY_SET%; WHERE=<<<; USING=<<<; TOTAL=<<<
*DIM C_ENTITY WHAT=%ENTITYSET%; WHERE=<<<; USING=<<<; TOTAL=<<<
*DIM GROUPS WHAT=%GROUPS_SET%; WHERE=<<<; USING=<<<; TOTAL=<<<
*DIM RPTCURRENCY WHAT=%RPTCURRENCY_SET%; WHERE=<<<; USING=<<<; TOTAL=<<<
*DIM TIME WHAT=%TIME_SET%; WHERE=<<<; USING=<<<; TOTAL=<<<
If we will change %C_CATEGORY_SET% for ACTUAL, and also change another parameters, script will work, package will run correctly. But we need using parameters, because we didn't exactly what will choose our client.
Our question have BPC Script Logic some kind of Globar Parameter(Variable), that we will set in A_Script, and then use them on B_Script?
How can we define parameter from another script logic, maybe we should send it?
Should we use System_Constants for solving this problem, if yes, how?
Any help will be appreciated
Best Regards,
Erlan Kadraliev
Edited by: Erlan Kadraliev on Feb 8, 2011 4:50 PM
Edited by: Erlan Kadraliev on Feb 8, 2011 4:58 PM
Edited by: Erlan Kadraliev on Feb 8, 2011 4:59 PMHi Ethan Jewett
1. About %ENTITYSET% it is normal. Before this line i write :
*SELECT(%ENTITYSET%, "ENTITY", GROUPS, "[ID]=%GROUPS_SET%")
So it is not this problem. %ENTITYSET% just parameter, that i used.
2. Are you running the scripts using the same data manager package? I am running two different package for 2 different Script.
For example aPackage for aScript, and bPackage for bScript.
My questions was how can i send parametr from one script to another, for example i can run another script by using BADi command Runlogic, but how can send parameter that i need to used on another script. I have for example parameter %GROUPS_SET% (CG001) on aScript, but i can't get this parameter on another script, if i write %GROUPS_SET% i will get error ("GROUPSDATAVALUE" is not assigned to the Data Administrator)
OR
Maybe if you will answer for next question, i will be able solve problem , How can i send parameter CG001 (this is %GROUPS_SET%, for example it stay in EXCEL in cell A5) from excel to script logic by running package. Maybe i can get cell value on Dynamic Script Data Management?
My Dynamic Script on bPackage
PROMPT(RADIOBUTTON,%CHECKLCK%,"u0412u044Bu0431u043Eu0440 u0431u0430u0437u043Eu0432u043Eu0433u043E u043Fu043Eu043Au0430u0437u0430u0442u0435u043Bu044F.",1,{"u0412u0441u0435u0433u043E u0410u043Au0442u0438u0432u044B","u0421u043Eu0431u0441u0442u0432u0435u043Du043Du044Bu0439 u043Au0430u043Fu0438u0442u0430u043B","u0412u044Bu0440u0443u0447u043Au0430 u043Eu0442 u0440u0435u0430u043Bu0438u0437u0430u0446u0438u0438","u0414u043Eu0445u043Eu0434 u0434u043E u043Du0430u043Bu043Eu0433u043Eu0431u043Bu0430u0436u0435u043Du0438u044F u043Eu0442 u043Fu0440u043Eu0434u043Eu043Bu0436u0430u044Eu0449u0435u0439 u0434u0435u044Fu0442u0435u043Bu044Cu043Du043Eu0441u0442u0438"},{"BPAST_ALL","BPEQ","BPPROCE","BPOPIN_GO"})
INFO
(%EQU%,=)
INFO
(%TAB%,;)
TASK
(/CPMB/DEFAULT_FORMULAS_LOGIC,SUSER,%USER%)
TASK
(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPPSET,%APPSET%)
TASK
(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPP,%APP%)
TASK
(/CPMB/DEFAULT_FORMULAS_LOGIC,REPLACEPARAM,CHECKLCK%EQU%%CHECKLCK%%TAB%)
TASK
(/CPMB/DEFAULT_FORMULAS_LOGIC,LOGICFILENAME,MYTEST_145.LGF)
Best Regards,
Kadraliev Erlan -
Sending mail from one Sap system to another
Hi all,
plz explain me how can i send mail from one SAP system to other SAP system.
Thanks in advance
VenkatHai Venkat
Go through the following Code
DATA: OBJPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
DATA: OBJHEAD LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE.
DATA: OBJBIN LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: OBJTXT LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
DATA: DOC_CHNG LIKE SODOCCHGI1.
DATA: TAB_LINES LIKE SY-TABIX.
DATA L_NUM(3).
Creation of the document to be sent
File Name
DOC_CHNG-OBJ_NAME = 'SENDFILE'.
Mail Subject
DOC_CHNG-OBJ_DESCR = 'Delivered Mail'.
Mail Contents
OBJTXT = 'Object text'.
APPEND OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
Creation of the entry for the compressed document
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
Creation of the document attachment
LOOP AT ITAB_DATA.
CONCATENATE ITAB_DATA-PRODUCTOR
ITAB_DATA-VBELN
ITAB_DATA-POSNR
ITAB_DATA-MATNR INTO OBJBIN.
APPEND OBJBIN.
ENDLOOP.
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
OBJHEAD = 'ORDERS'.
APPEND OBJHEAD.
Creation of the entry for the compressed attachment
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 1.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'TXT'.
OBJPACK-OBJ_NAME = 'WEBSITE'.
OBJPACK-OBJ_DESCR = 'ORDERS.TXT'.
OBJPACK-DOC_SIZE = TAB_LINES * 255.
APPEND OBJPACK.
Completing the recipient list
target recipent
clear RECLIST.
RECLIST-RECEIVER = '[email protected]'.
RECLIST-EXPRESS = 'X'.
RECLIST-REC_TYPE = 'U'.
APPEND RECLIST.
copy recipents
clear RECLIST.
RECLIST-RECEIVER = '[email protected]'.
RECLIST-EXPRESS = 'X'.
RECLIST-REC_TYPE = 'U'.
RECLIST-COPY = 'X'.
APPEND RECLIST.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = DOC_CHNG
TABLES
PACKING_LIST = OBJPACK
OBJECT_HEADER = OBJHEAD
CONTENTS_BIN = OBJBIN
CONTENTS_TXT = OBJTXT
RECEIVERS = RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
OPERATION_NO_AUTHORIZATION = 4
OTHERS = 99.
Thanks & regards
Sreenivasulu P -
How to transfer material from One HU strorage location another HU location
Hi Guys
Is there any procedure to transfer material Box from one HU storage location to another HU storage location
thanks in advancveHello,
No you are wrong Vishal. We can use HUMO for HU movement. In the detaili of report screen of HUMO t-code, select the data and go to header tab "edit". You will get multiple option to do the transaction related to HU movement.
Thanks
Milind -
I have two mail accounts on my Mac. I want one account to bcc me when I send emails from that account. I checked "automatically bcc myself" under mail>preferences>composing, but both accounts bcc me when sending mail. Can I set this to only bcc myself from one specific email account? Thanks.
It does not make sense that your ssh does not have a dash capital Y (-Y) option. It is in "man ssh", and my 10.6.6 has the -Y option, and I've had a -Y option since at least Tiger (10.4) days.
My ssh is in /usr/bin/ssh
I'm not very good at X11 issues, so I'm just throwing ideas out there.
Does your broken account have a $HOME/.ssh/config file, and if so, what is in it?
Does the broken account have any $HOME/.x* or $HOME/.X* files that X11 might be reading to configure your X11 behavior differently from the new test account?
$HOME/.Xauthority
$HOME/.Xdefaults-<hostname>
$HOME/.Xresources
$HOME/.ICEauthority
$HOME/.keymap.km
The above are a few names I found looking through "man X"
While I'm thinking about it, I assume that when going to the server, you are using the exact same user account on the server, so that you have a constant at least at that end.
Have you tried trashing your
$HOME/Library/Preferences/org.x.X11.plist
file, to see if that is affecting the broken account?
Again, I am just throwing out ideas to see if anything sticks. -
Sending idoc from one r3 system to another r3 system
Hi
I want to send the idoc from system A to system B only (not from B to A). Then is it need ports in both the systems or only in one system ?? If it is on one system..... on which system port is needed ?? (A or B) ?? similarly RFC destinations also......whether it needs one or two ??
thanks
kumarHi seshu,
thanks for your reply !! once you create the rfc destination and after that if you create the port for that rfc destination............whether port will be created for the source system side or target system side. ??
thanks
kumar -
Movement of material from one S.Loc to another S.Loc (both are WM managed)
Hi,
When i transfer the material between s.locations (both are WM managed) TR itself is not getting created and i checked all the necessary configs and everything seems to be correct. But the strange thing is if i check in LS24 the stock is placed in interim storage type where as TO is not created also TR is not created as our process is TO will be converted automatically from TR.
Any light on this issue will be much appreciated.
Regards
SudhakarHi Sudhakar,
Check if Auto TR is enabled for the Movement type, if you need to have the TR information - disable this setting in OMLR. Else Goto LT10 and move the Goods from Interim location to the final bins.
Let me know if this helps.
Thanks -
Problem issueing material from one WBS element to another
Hi Guys, This is my first post so be kind.
Our projects during their life cycle change their WBS element sub number. Example New project starts with WBS element # E.7029.00.010 at some point in the project it moves on to the next level and the WBS element changes to E.7029.00.020 later in the project it will again change to E.7029.00.030. Ok you get the idea.
Now the problem. When the project is at the .020 level we purchase inventory and recieve it into project inventory under the WBS elemement E.7029.00.020.
Now the project has moved on to E.7029.00.030 and we want to create a production order to make a prototype. The WBS element for the production order is E.7029.00.030 but the inventory is still under WBS element E.7029.00.020. When we go to issue the material to the job it says there is none in inventory under WBS E.7029.00.030. Which is right it is all under E.7029.00.020.
Is there a way that we can store the inventory under E.7029.00 and be able to issue it to any sub group of E.7029.00 so that it would not matter if the current WBS is E.7029.00.020 , E.7029.00.030 or E.7029.00.050?
Since our BOM's can be quite extensive and often contain a large number of new components this would be of great assistance.
Thanks for your time and consideration.The project moves on to another stage. During the development of new products the project goes through several stages before the new product is released for production and sales. For example:
Stage 10 - concept
Stage 20 - initial design
Stage 30 - design refinement
Stage 40 - Bata testing
Stage 50 - Final design
Stage 60 - Production process design
At each of stages 20 - 50 changes to the BOM can occur. Material would be purchased at stage 20 and could continue to be used through the rest of the stages including after release to production. But if the material is purchased during stage 20 then it sits in inventory under the WBS element ending in 020 but when the project moves on to the next stage the material will be used to produce prototypes for stages 30 - 60 as long as the material is included in the BOM at that time. -
HT2736 Can you send money from one iTunes account to another?
Need help!
iTunes Store credit can't be spent on any sort of gift; you either need to have a credit card associated with the first account or ask the iTunes Store staff to put a gift card's balance back onto it, which they'll only do if none of it has been spent.
(100768) -
Transfer stock vaule of material from one profit center to another one
Hello All experts,
in our system (SAP 470) there're some materials which need to change the profit center in their master data. these materials still have stock values. after change the profict center, we want transfer the stock of old profit center to the new profit center.
is there any way to do that?
Thanks you very much
mavisHi,
i still have some concerns about the creating new materials solution because we have to create the following relevant things:
SD: condition record
MM: infor record
PP: new BoM
we have 25 materials which will change profit center, there're a lot extra works we need to do.
Is there any other way we can try?
Regards -
How to send message from one project queue to another project queue
Hi ,
In my scenarion I have project where y destination is queue viz queTest.
In the second project my input is JMS queue . where I to point this project input queue is queTest(first project queue).
Please suggest me on this as I am working first time in Java CAPS
Thanks in advance.Hi Bolla,
If I understand correct all you would need to do is in your connectivity map, publish the data to that queue.
example high level hierarchy
prj1Data1
-Indata1 svc
-Indata1 topic
-Indata1Translation svc
-Outdata1Delivery svc
-queOutdata1
prj2Data2
-Indata2 svc
-Indata2 topic
-Indata2Translation svc
-Indata2Delivery svc
cmData2Out Indata2Delivery publishes to queOutdata1
Hope this helps and does not add any additional confustion. -
How can I send stuff from one iPhone to another via Bluetooth?
How can I send stuff from one iPhone to another via Bluetooth?
There are some apps that will let you send photos from one iOS device to another over BT.
Maybe you are looking for
-
Passing request of file input type to a jsp
Hi i m using this script for file uploading the form is.... <html > <head> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /> <title>Untitled Document</title> </head> <body> <form action="uploadscript.jsp" name="filesForm" enc
-
Burning several disk images in one DVD
Is it possible to bun 2 disk images on a DVD? I tried in DU but if both .img are selected,"Burn" is greyed. Alternatively, how can I combine 2 disk images into one, so that DU will accept to burn it? I found the following advice a Forum: A .dmg file
-
Trying to activate a creative suite (mac)... please help
Have had a rough day with Adobe... have been "helped" by the chat people at least 10 times today with no resolution. Some component of my computer (Mac) got fried, and the Apple geniuses advised me to retrieve the data and applications by getting an
-
Exception condition "CNTL_ERROR WD-abap Smartform to pdf
Hii, I am using a webdynpro - abap application. I am showing a smartform as a pdf in one on the windows. When the link in the main window is clicked, a secondary window. Instead of the pdf, I get following exception.Kindly help me understand, where
-
problem trying to update iTunes error massage the older version of apple software update cannot be removed contact your nearest support group how can i fix this problem i have tried many things but it still dose not work for me ????