Sending Message Type from the same Logical System to 2 different ports

Hi,
I need to transfer the same message type 'DEBMAS' in the same logical system,
to 2 differenet port - directly to XI (as an IDOC) and to function (as a PROXY),
In XI this are 2 different interfaces.
I see in we21 that when adding message type in outbound I can also write message code or message function so I tried adding an additional row of DEBMAS with message code but it did not work.
Thanks,
Naama

Hey,
This question should not be posted here, but in the XI forum,
anyways,you can do it in 2 ways
1) You can send the message to XI, and in XI it should be configured to send to
two different places, which can be done in the Receiver Communication Channel, one would be IDoc Receiver and another would be a SOAP Receiver. ( here you send one message to XI and XI will send it to the PROXY )
2) You can specify the settings in your Partner profile (we21)and while generating the Port (we20).
Regards,
Samson Rodrigues.

Similar Messages

Two R3 servers have the same logical system name?

Can two R3 servers have the same logical system name present in the same network? We plan to clone our production server and let the clone reside in the same network. The clone is identical with the production server with the same SID, hostname, logical system name, but different IP address.

Hi
Check this [Link|http://help.sap.com/saphelp_nw70/helpdata/EN/da/5990df015b5b43a36f6ce7fa1ee8c0/content.htm]will cleare you doubt
Regards
Uday

Connect one JAVA ADS instance to multiple clients from the same ABAP system

Hi,
Does anyone know whether it is possible to connect multplie clients from the same ABAP system to a JAVA instance running ADS?
If so how do you setup the java destinations in Visual Admin and SM59 RFC connections?
Any help is appreciated,
Sander

Dear Sander,
this is always the case if you arrange the ADS connection.
You have to set up the RFC connection 'ADS' in ABAP side and this connection/destination is client independent. So you can use this from all clients of your abap system.
On Java side you have to arrange the already mentioned FP_ICF_DATA_<SID> destination. On the ABAP system and client (you specify in this destination) you have to maintain the user ADS_AGENT and your templates should also exist on this client. If there is no client defined, the default client will be used.
Regards
Istvan

Can there be more than one port for the same logical system

Can we have more than one TRFC port for tranferring data from one logical system to another?
The requirement is to transfer same basic idoc type from one logical system to another through two different ports. Is it possible?
For eg. some specific data (country specific) for the same basic idoc type can be sent through a separate port and the other data through a different port inorder to distinguish between the two.

Hi Shital,
I don't think so. Because of that what i told you. There would be a dirty trick (back routing) to solve your issue. But its quite difficult and not standard. You create two http receiver services and two http sender services. You route your message depending on payload to the one or the other http receiver channel. The receiver is in both cases: THE XI! Now you have a second message, which you can route to IDoc adapter. But in this case you have different sender and in the receiver determination you can put the sender, so you will be able to use different communication channnels and so different ports / destinations.
Advantage: Your task would run, no performance problem (http: very good, asynchron)
Handicap: You see every message double in the monitoring, the scenario is not easy to understand and it is a big task 4 other people to change it.
Regards,
Udo

Reporting - Costs from the same GL account required in different categories

We have a business requirement to report in the following way for management account reporting:
Sales
Gross Profit
Freight
DC Rent & Other Operating Costs
DC Wages
Intercoy Logistics Charge
   Total Distribution
Store Operating Expenses
Wages
Rent
Other Expenses
   Total Store
Head Office Operating Expenses
Advertising
Wages
Other Expenses
   Total Head Office
The issue is that Wages appears 3 times in the hierarchy, for different groups of cost centres but using the same GL Accounts.
We currently export a hierarchy from ECC6 as a Cost Element Group but it is not possible to include a cost element multiple times in a hierarchy.
We do not wish to create different GL Accounts for DC, Store and Head Office wages.
Does anyone have any suggestions as to how we can report in the above format?. Can the hierarchy be built directly in BW?
Thanks,
Susan

Adrian - the problem is that you have two organisational enties that you are trying to merge and provide an intersection of data
The easiest and from a scalability viewpoint - the worst is to have two key figure structures
ie in your columns you have a normal This month, YTD etc - which is based on key figure plus a time srestiction (and maybe a version for actual or plan etc,)
then in your rows you have multiple hard coded lines - ie create a second key figure structure and have hard coded RKFs ie Sales is all profit centres, head office opetaring expenses is profit centre of head office and cost element group of expenses etd
To get the text only lines you create a CKF and hard code it to a constant of 0 (I know it's pants but unless you do it in Crystal that is the only way) and give it a text of Head Office
There are other ways of doing it which are more scalable but if yo uare new to BW this is the easiest way
Naturally if you have a huge row count then you will be in trouble trying to maintain it as in effect you are hard coding each line

Hi, I have recieved a picture message twice from the same number to my email address but can't open as there is no attachment. Can anyone help? Is

I Have recieved now 2 emails from O2 saying I have a picture message from a mobile number sent to me. the email has the paper clip which I know usually means there is an attatxhment. When opening there is no option to open anything just says you have recieved a message from this number no attachment. Can anyone help please? X

You did not get an email, you got a MMS. You have to enable MMS on your phone before you can see the picture.
http://en.wikipedia.org/wiki/Multimedia_Messaging_Service

SMS - all messages arrive from the same contact and now unable to delete

Hi
An SMS arriving now appears to come from one contact. Now I am unable delete that chat stream - already carried out hard reboot
Any advise would be great - thanks
K

I'm afraid not - a couple of hard reboots and pressing delete has finally emptied the SMS box but it was painful - I suspect there is still a bug there

Same Logical System Name, different Business System

Hi all,
I have a problem regarding SLD and Integration Directory. The client is requiring me to use the same logical system name for two different business systems. It seems that this is not possible in XI. When I tried activating the business system in ID, I'm getting the error, 'Logical system XXX already exists in communication component YYY'. Please help. Thanks!
IX

Hi,
You cannot have same logical name for two business systems....
Why you need it?? How will the SAP system understand which which system the message was sent for?? Some workaround like
1. Create a business system with this logical system
2. Overwrite sender/receiver business system in the receiver agreement for messages sent to 2nd business system..
This may lead to discrepancies....
Regards
Suraj

Qemu/kvm: multiple USB devices from the same vendor

Hi fellow gurus,
Trying to pass-through two USB devices. One works just fine, but two produces an error.
They are the same type from the same vendor and libvirt seems to have no way to differentiate between the two, as it only uses the <vendor id='0xnnnn'/> & <product id='0xnnn'/> strings and not serial number of the device.
There is a reference -unanswered- here: https://bugs.launchpad.net/qemu/+bug/1090602
The error message from virt-manager:
Error starting domain: operation failed: Multiple USB devices for 10c4:ea60, use <address> to specify one
Detailed output
Traceback (most recent call last):
File "/usr/share/virt-manager/virtManager/asyncjob.py", line 44, in cb_wrapper
callback(asyncjob, *args, **kwargs)
File "/usr/share/virt-manager/virtManager/asyncjob.py", line 65, in tmpcb
callback(*args, **kwargs)
File "/usr/share/virt-manager/virtManager/domain.py", line 1063, in startup
self._backend.create()
File "/usr/lib64/python2.6/site-packages/libvirt.py", line 678, in create
if ret == -1: raise libvirtError ('virDomainCreate() failed', dom=self)
libvirtError: operation failed: Multiple USB devices for 10c4:ea60, use <address> to specify one
The devices themselves:
Bus 001 Device 009: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 001 Device 008: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Is there any workaround or fix for this?
Cheers,
Mike.
Last edited by DrMikeDuke (2013-07-22 14:01:18)

As I understand it, host:bus.addr is an alternative to host:vendor_id:product_id. So if I wanted to pass both of these thumb drives:
$ lsusb
Bus 001 Device 002: ID 1e3d:2093 Chipsbank Microelectronics Co., Ltd CBM209x Flash Drive (OEM)
Bus 001 Device 003: ID 1e3d:2093 Chipsbank Microelectronics Co., Ltd CBM209x Flash Drive (OEM)
I would use host:001.002 and host:001.003 . Note I said would use, because I've never tried it.
And usb_add is a qemu monitor command. See sections 3.4 and 3.5 of the doc you linked for info on the monitor.
All this being said, I don't use libvirt stuff so I don't know if it has the capability to specify USB devices by bus.addr or whether or not it enables the monitor.

Unable to create two SourceSystem with same Logical System

Dear gurus,
The customer has expressed the need to connect a data source with the same Logical System name of the actual DS.
Infact, on the SCC4 the R3 Prod/qua/dev has the same LOGSYS.
The aim is to link the PROD/R3 system to the QUA/BW system.
During the creation of the DS on RSA1, an error message display that BW cannot create the Source because the Logical system is already in use.
All we know that on BI can not be two identical technical name, but if i CANNOT change the LogicalSystem on the SCC4, there is a workaround?
Can i map the new sourcesystem with another LOGSYS name?
Or the only solution is to change the logical?
Thanks in advance
C.C

Hi Sven and thanks for the reply.
unfortunately the customer chose to appoint the entire landscape with the same logical system name (policy), so that i cannot make this change on SCC4.
So, i have to link only one SourceSystem (or quality or prod)...but at least, i will make a refresh copy of the quality system
ps: i'm a Basis

How can I test a RTP(send&receive) application on the same computer?

I an writing an application that lets one computer (A) sends a media file to another computer (B) and B receives it and play it.
But how can I test this application on the same computer
Eg.Transmitter: localhost 43000
Receiver: localhost 43000
It will retuen an error since the port number is alreeady used by another program.
I know if I test it on different computers, it should be fine, but how can I test it on the same computer?

JMStudio sends RTP packets from the same UDP port as the specified in the destination port, so you can't try it in the same computer. The examples provided in http://java.sun.com/products/java-media/jmf/2.1.1/solutions/index.html follow this rule aswell, but it's easy to modify it:
rtpMgrs[streamid]=RTPManager.newInstance();
localAddr = new SessionAddress( InetAddress.getLocalHost(),localDataPort);
//By deafault, in the examples, they use remote DataPort instead of localDataPort.
//You can specify localDataPort to any different free port number, or to
//SessionAddress.ANY_PORT if you don't mind the port number
remoteAddr = new SessionAddress(destIpAddr,remoteDataPort);
rtpMgrs[streamid].initialize(localAddr);
rtpMgrs[streamid].addTarget(remoteAddr);

Same logical system name for two productive systems - BW, PI issues

Dear all,
we have a productive system which serves two companies (different company codes). This system is connected both to BW and PI for both companies.
There is a requirement that these two companies must use their own system, so the whole landscape (dev,qa,prd) will be copied to different systems (different server with different system id).
As a result of the above procedure we wll have two different productive systems, as required, but we wll have the same logical system name for the two productive systems, which must be both connect to bw and PI.
However as far as I know:
- we cannot connect systems with same logical system name to BW,PI
- we cannot convert logical system name of the one of the two productive systems as they are productive and so this is not supported.
How can we overcome the problem?
Please advice.

> However as far as I know:
> - we cannot connect systems with same logical system name to BW,PI
> - we cannot convert logical system name of the one of the two productive systems as they are productive and so this is not supported.
Right.
> How can we overcome the problem?
Since you split up systems (or plan to) I highly recommend booking an SLO service (http://service.sap.com/slo). Those people have to the tools and the knowlege to help you. I would not do this on my own.
Markus

Same logical systems for two environments productive

Hi gurus.
I have a question for ALE
There are two production systems a copy of another, who want to connect both to configure the ALE, but by mistake, both systems were the same logical system when they made the copy. Since this change takes months. At the moment I can not make this change in BDLS because it is a productive environment.
When trying to configure the ALE, I am have problems with the logical system name, although one of the settings I gave it another name when you configure the transaction BD64.
Guys, what I find solution to configure the ALE, without changing the logical system to a productive environments ??????
Regards,
Desiré

Hi Mark, thanks for the replay.
I understand also that the solution is to execute the BDLS to change the logical system and convert all tables to new logical system.
I don´t know how the process copy for both system productive.
The problem is that both environments are connected to BW, and other applications and they opened an OSS note to SAP consulting and and the answer given is that they did not recommend changing the logical system.
I thought if there was another way to configure ALE without having the problem of changing the logical system environments.
Regards,
Desiré

BI - 2 OLTP with same logical system canu0092t be connected to SAP BI

Bi 7.0
SAP ECC 6.0
I am in a test environment in SAP ECC and SAP BI.
I have 1 SAP BI and 2 SAP ECC. Both SAP ECC have the same logical system name: 10.
I could connect the 1st SAP ECC to SAP BI, but I am not able to connect the 2nd SAP ECC because the logical system name is the same than the 1st one.
Question 1: is there a possibility / way to connect the 2nd SAP ECC without changing the logical system name?
Question 2: if I am in test environment what is the risk to change the logical name in SAP ECC?
Regards

Not solved.

TS3899 I send an e-mail message from my iPhone 5c and it shows up in Sent folder as a duplicate, 2 of the same e-mail messages sent at the same time.

I send an e-mail message from my iPhone 5c and it shows up in Sent folder as a duplicate message. 2 identical messages sent at the same time. What's up with this? Tried Apple Support by phone, and did a couple of troubleshoots, then my connection with Apple Support was cut off. Issue not resolved yet.

Did the mail get sent? Is the only issue the fact that it appears twice in the Sent folder?

Sending Message Type from the same Logical System to 2 different ports

Similar Messages

Maybe you are looking for