Sending message while order get Pending Status

Hi,
We r using status profile for releasing order. If order fails the condition, it remains in the Pending Status. So we need to send these order to Sales Rep for review. How to send email to Sales Rep?

Hello
Create 'Z' Report and [send that report by mail|http://www.sap-img.com/fu016.htm]
Thanks & Regards
JP

Similar Messages

Sending messages in order to a DB

Hi everyone
I´m sending messages from an R/3 system to a Database without a BPM.
Do someone know how can I simulate the Exactly Once in Order in a JDBC Receiever Communication Channel
Cause I need the messages to arrive in nthe order that they gor out of the R/3 system.
Thanks in advance
Emmanuel

Hi
My scenario is R/3 Proxy --> PI 7.1 JDBC (DB2)
The average volume is 400 000 registers, I need to ensure that the registers be inserted in the order that they were sent.
There are 2 ways to send the messages:
1.- Send all registers in 1 event from R/3
2.- Send the registers in smaller packages
But in both options I have to ensure the insertion sequence.
Do you know wich should be the best practice to this scenario.
Thanks in advanced
Emmanuel

Error message "unable to get printer status"

I am connecting an HP6700 with a macbook pro running 10.8 wirelessly. Wireless printing has been working fine for months until it recently stopped. I have reconnected to wireless network on both printer and computer, restarted both machines, both say they are connected to the wireless network. However when I try to print it starts to print and then I get an error message that says "unable to get printer status" I don't know what else to do. Help!

Hi lizse,
Welcome to the HP forums!
Sorry to hear you've been having trouble printing wirelessly between your Mac running 10.8 and your Officejet 6700 printer but I will certainly do my best to help out
To start, I know you've power cycled the printer and the Mac but I'm wondering if maybe your router had an update. I'd like you to turn off the printer and Mac, once they power down pull the power cord on your router for 30 seconds. Once the router is back up (the lights have returned to normal) turn the Mac and then the printer back on. Once they settle, please try to print again.
If that doesn't resolve the issue please try resetting your printing system (don't re-add the printer just yet) and then perform a verify/repair of disk permissions. Once those complete, reboot the Mac and re-add the printer before trying to print again.
Hope to hear back from you soon!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

MAIL reply all to large message- "Cannot send message" how to get this to go away

I replied all to a large message and got the notification "cannot send message..." I usually press cancel or try again, but since the message was so large, I don't have access to either buttons. It won't allow me to scroll down and maximizing the message does not help. I have tried force quit and shutting down my computer, but everytime I reopen mail, the message pops up. PLEASE HELP!!!!

Mail: Mail unexpectedly quits when viewing certain messages

IChat Lion Sends Message while I'm typing...

First off, I used to have ChatX on my iChat before I updated to Lion.
Now that I updated, while I am typing a message, say, "How are you?"
While I am typing it out, bits and pieces get sent automatically when I don't even finish typing it and hit ENTER key.
It looks like this in the chat window:
How are
How are you
How are you?
It's like every 2 seconds someone is hitting an imaginery ENTER key and the message gets sent through.
Any help would be apprecaited

Hi,
Go to the iChat > Preferences > Accounts.
Highlight the Bonjour one.
Disable the Send as I Type option.
For some reason the Yahoo Account can "See" this setting and uses it
(AIM on the PC app have "Real Time" that is supposed to do the same thing but it does not work to iChat and iChat does not do it to AIM on PC Buddies)
10:03 PM Saturday; July 23, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Send Message in BPM gets "logically deleted"

Hi everybody,
we got a message split in BPM. The singel messages are send through "send context".
Strange:
In SXMB_MONI_BPE the message gets logically deleted.
And in SXMB_MONI the BPM does not send the message to the configured receiver.
The message is send back to the process !?
Any suggestions?
Thanks a lot
Regards Mario

The required number in the fork was wrong!

Send message that i get from class in popup

HI All
i have method which is returning error message in some cases
and i want to use the text that i getting from the exception object
but to use the FM 'POPUP_DISPLAY_MESSAGE' i need to use a message class etc
i just want to reuse the messge that i getting from the catch
how can i do that ?
and i use the following code to do so
CATCH cx_l_model INTO lx_dup_node.
        lv_dup_msg = lx_dup_node->get_text( ).
        CALL FUNCTION 'POPUP_DISPLAY_MESSAGE'
          EXPORTING
            titel = 'Warning'
            msgid = 'MC_DT'
            msgty = 'W'
            msgno = 006
            msgv1 = lv_dup_msg.
Regards
James

Hi,
Try this
DATA
     : a          TYPE i,
       gr_root    TYPE REF TO cx_root,
       message    TYPE string.
TRY.
    a = 1 / 0.
CATCH cx_sy_zerodivide INTO gr_root.
    message = gr_root->get_text( ).
    CALL FUNCTION 'FC_POPUP_ERR_WARN_MESSAGE'
      EXPORTING
        popup_title        = 'Warning'
       IS_ERROR           = ' '
        message_text       = message
       start_column       = 10
       start_row          = 1
ENDTRY.
Or
DATA
     : a          TYPE i,
       gr_root    TYPE REF TO cx_root,
       message    TYPE string.
TRY.
    a = 1 / 0.
CATCH cx_sy_zerodivide INTO gr_root.
    message = gr_root->get_text( ).
    MESSAGE i017(appl_common) WITH message
            DISPLAY LIKE 'W'.
ENDTRY.
Regards

I am trying to use My Messages on my Verizon Ellipsis and I get the message that says mobile number (tablet) doesn't have permission to send messages. How can I change this?

How do I give permission to my Verizon Ellipsis tablet to send messages - in order to use My Messages?

Hello AdamsFamily04,
Staying connected with all you devices is important. I am here to help you connect your Verizon messages with the tablet. Verizon Messages on the tablet needs to be associated with your mobile number to configure the messages. When the message prompts you for a number, use the mobile number you want to link it with and you will be ready for use.
YareliM_VZW
Follow us on Twitter at @VZWSupport

BBM Q10 Sending messages getting stuck

very strange behaviour with BBM
I have BB Q10 and my wife BB 9900
We can chat on BBM as see each other online. BB9900 can send messages and Q10 get them fine, but when I send messages with Q10 I get an X. my wife can not get them.
We have done everything latest version update. sim card out, batteries out, restarts, ping.
Is anything we missing we can do.

Hi Massimo-Deb,
Welcome to the support community!
Could you provide a bit more detail please so I can assist you better?
Are you having this issue sending BBM messages to any other of your contacts?
Is your wife able to send and receive BBM messages with all other contacts?
Does this happen each time you try to send her a BBM message or certain times only?
Have you tried removing and re-adding each other as contacts and testing?
I look forward to your response.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

"PENDING" Status in PROCESSING_STATUS_CODE field RCV_TRANSACTIONS_INTERFACE

Iam Working in R12 Instance,I created Purchase Order and it was apporved,now iam working in RCV_TRANSACTION. iam having data in rcv_headers_interface and rcv_transaction_interface as follows
rcv_headers_interface
INSERT INTO rcv_headers_interface
(header_interface_id,
GROUP_ID, processing_status_code, receipt_source_code,
transaction_type, auto_transact_code, test_flag,
last_update_date, last_updated_by, creation_date,
created_by, expected_receipt_date, comments,
validation_flag, transaction_date, org_id
VALUES (rcv_headers_interface_s.NEXTVAL,
rcv_interface_groups_s.NEXTVAL, 'BATCH', 'VENDOR',
'RECEIVE', NULL, 'N',
SYSDATE, fnd_global.user_id, SYSDATE,
fnd_global.user_id, SYSDATE, 'test',
'Y', SYSDATE, 204
rcv_transactions_interface
in below table i inserted two rows with different po_line_id,po_location_id,po_distribution_id
INSERT INTO rcv_transactions_interface
(interface_transaction_id,
header_interface_id, processing_status_code,
transaction_date, GROUP_ID, last_update_date,
last_updated_by, creation_date, created_by, transaction_type,
processing_mode_code, transaction_status_code, quantity,
to_organization_id, source_document_code, po_header_id,
po_line_id, po_line_location_id, po_distribution_id, comments
VALUES (rcv_transactions_interface_s.NEXTVAL,
rcv_headers_interface_s.CURRVAL, 'PENDING',
SYSDATE, rcv_interface_groups_s.CURRVAL, SYSDATE,
fnd_global.user_id, SYSDATE, fnd_global.user_id, 'RECIEVE',
'BATCH', 'PENDING', 1,
207, 'VENDOR', 81203,
102032, 193877, 199240, 'TEST'
and i run the "Receiving Transaction Processor",It completed with Normal Status,but in base tables data was not inserted,i got "ERROR" Status in PROCESSING_STATUS_CODE field of RCV_TRANSACTIONS_INTERFACE table and in rcv_interface_error iam getting "Error: Default Operating Unit has not been defined for the Org . (OU=)" in error_message field and "RCV_NOT_IN_ORG" in error_message_name field. and i assign responsibility level operating unit after that concurrent program completed normally and iam getting
"PENDING" Status in PROCESSING_STATUS_CODE field of RCV_TRANSACTIONS_INTERFACE table,why its is having pending status,weather i having to run any workflow,
Edited by: user8114609 on Apr 19, 2010 9:46 PM

Hi Jyoti,
Actually value is not set for "MO_SECURITY_PROFILE",so i tried to set the value at responisibility level,now in working in "vision operaions" opeating unit but in the list its is not coming,only vision "operations-supplier management" only coming.,weather its a setup program, please guide me this
Thank u for ur help
regards,
Viji

Can't send message

Hi all,
I'm experiencing weird problem. I can't send message to anybody. It's still stuck on "rotating" status. But still can receive messages. And one more thing - can't make and answer any calls.. Any suggestions?

Hi, I just bought a nokia 5230 and I'm having problems to send messages; they are getting stuck in the outbox folder. I changed to message centre but it is still not working. Can someone help me to resolve the issue? Thanks

6085 won't send messages

This phone had been working great for a couple of years and I stopped using it for a while. And because I hadn't used it, I had to get a new sim card. After I put the new sim card in, everything works except sending messages. I get this error msg: "content not supported." Any ideas? thx

First ensure you have the correct message center number,next try free up your message folders and last try a factory reset type in *#7780# if asked for code its 12345
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Can't send messages and normally can't log in

I've been havinga problem for a couple of days that I can't send messages; they just say pending, and when I log back on they're gone completely. Also i've been having another problem for months that I normally can't log in because it says that i'm already logged in on this computer. I try to restart the pc but that doesn't help at all. I try on other devices which also don't help. It's getting really frustrating please help me with this problem.
I'm using windows 8 x64 and using the desktop version of skype on the latest version on skype. It used to work perfectly fine.

Have you tried uninstalling and reinstalling your SKype application?

Sms send message VI Dialog box

Whenever I get an error using the SMS Send Message.vi I get a dialog box that disables my program unless I manually answer the prompt. Can NI (or anybody else) please
1. Have an option to disable the dialog box
2. Unpassword protect the VI so I can do it myself
3. Give me some other option I missing.
Thank you
Robert

Hi Robert,
Since the Clear Errors VI is not available with a PDA application, you can use a case structure to clear errors instead. Wire the error out of SMS Send Message to the case selector. In the Error case place an error cluster constant (right click on error out and Create >> Constant) to pass through the remainder of your program. For the No Error case, pass the error wire straight through.
Message Edited by Jennifer_R on 02-04-2008 06:54 AM
Jennifer R.
National Instruments
Applications Engineer
Attachments:
Clear Error.JPG ‏5 KB

When I send mail, I keep getting this message. An error occurred while sending mail. The mail server responded: "JunkMail rejected - 71-12-190-31.dhcp.leds.al

When I send mail, I keep getting this message.
An error occurred while sending mail. The mail server responded: "JunkMail rejected - 71-12-190-31.dhcp.leds.al.charter.com ([127.0.0.1])
[71.12.190.31]:52956 is in an RBL, see
http://www.spamhaus.org/query/bl?ip=71.12.190.31". Please check the message recipient [email protected] and try again.
How do I get rid of this problem?
WNS

Hi there,
If you have a closer look at message you are receiving it already states the problem. The domain 71-12-190-31.dhcp.leds.al.charter.com is blacklisted by spamhaus.org (is in an RBL).
Your TB is (my guess) setup to send the message directly to the recipient.
As a rule of thumb the majority of mail sent from a dynamic dns address (the kind of address you are getting from your ISP) is blacklisted as a precaution against spam abuse due to virus/trojan infected PC's.
Nothing you can change there. Stop sending the message directly and use your ISP's account instead.
/Frans

Sending message while order get Pending Status

Similar Messages

Maybe you are looking for