Sending multiple projects to compressor

is there a way to send multiple projects to compressor? in fcp7 i was used to mark as much sequences as i wanted and send them to compressor. in fcpx i'm not able to select more than one project when i want to send them, i have to do one after the other. any hint?
thanks, wolfgang

Scelzi41
I am not sure what your plans are for a disc menu for this grand project (5 projects in one), but I would remind you that "Premiere Elements (any version) Blu-ray disc format on Blu-ray disc" playback does not recognize stop markers.
ATR

Similar Messages

How to send a project containing multiple pictures by e-mail?

I have previously used Photoshop Album 2.0 on PC, and have just purchased an iMac and the PSE 6.0 for it.
I have a leisure-time project at hand, where I would like to send some 30 pictures for review for some people.
With Photoshop Album, I could in similar cases include all the photos in a collection and then make a small slide show out of it. the size was circa 2 Mb, with music included. Now when I try to do the same in PSE 6.0, the file size is 38 Mb. That is WAY too big to be sent my e-mail.
What do you suggest - how could I send multiple small resolution pictures by e-mail? I do not want to use web gallery. The pictures do not need to be of high resolution, but something more than thumbnails still.

Responding to "is it safe"...
With Flickr or JAlbum you upload your images to a web host and provide a link so another person can view those pictures. Both programs have built-in ftp functions so they upload for you.
I can't think of anything about either that would be unsafe, but your images could be viewed by complete strangers if you don't mark them "private". Normally, you wouldn't care who views your images.
Google Flickr and JAlbum and follow the steps to set up the program. Both very simple. These are just two suggested ways to put your images up for review by other people. There are dozens of other ways to do it. These two are free and simple to use.
If you do want to work in Elements, and send the results as an attachment to email, then a slideshow saved in the .pdf format is the best solution.
If your images are 2mb, then you are trying to send images that are about 2000 px x 3000 px right out of the camera. That's a 10" x 6.5" image at 300 dpi. Your viewer doesn't need that large a file to see the image.
Resize those images to, say, 500 px on the longest side and your viewer will still see the same image in the same detail on his screen. The file will be just over 100 kb.
Save your original in the 2mb size, and use Save As with a different file name for the reduced size images you'll send.

Failed to send my project in final cut pro to compressor

I tried to send my project in final cut pro to compressor but when I go to file then see send to compressor it will not let me click on "send to compressor". I checked but none of my files are missing or anything and the project is only 4 minutes long. This has happened to me once before and it completely crashed my computer. I had to start out fresh which was a horrible process. CAN SOMEBODY PLEASE HELP?! (URGENT)What might I have done wrong that this happens? In the picture below, this happens and I have no idea why that is.

I suspect it's a FCP X issue rather than a Compressor issue.
Will FCP export a master file? Make a short section with the range tool and find out.
Tri reseting the zoo's preferences. Hold down the option and command keys when you launch to reset.
Russ

How can i send multiple films from iMovie06HD to iDVD? ( iDVD gave me ****)

After 2 weeks of jerky videos, unexpected shutdowns, multiplex and buring errors i yesterday finally had something. Than i noticed, that the chapters didn't work. Allright, i thought, those 5-min chapter-marks are a mess anyway. I got myself iMovie06HD to finally set the markers myself.
My Problem: I have got four films to burn on that dvd. Each of which is about half an hour and i want them to be on that dvd as four single films with own chapter menues.
How can i send multiple films to iDVD from iMovie06HD? All i found was "only send selected clips" which i did but then my four single films arrive at iDVD as ONE whole film, with chapters yes - but there is no way to create a menu with four single films. I tried all i could imagine. I tried to solve the problem by creating four iMovie projects which will also create four corresponding iDVD projects. I tried to export the movies in multiple formats but then the chapter markers seem to be gone.
I have to admit i'm desperate. I hope i made my problem clear to you and somebody knows a solution. Thank you! Cheers, Matthias

Just drag and drop each iMovie project on to the iDVD menu - being careful to avoid any of the drop zones.

Error Message sending a job to compressor and Blu-Ray

I am having trouble with a job in FCP 7 and sending it to compressor. it runs and about 20 minutes until completion I get a failed message. "Failed: Quicktime Error: 0" on my m2v file. What could be causing this issue?
I also get a quicktime error while trying to send my project from Share to blu-ray?
Any help would be appreciated!

If I am right, error 0 means that you cannot copy the source onto the destination.
Sure that you have enough space for your project ? or that your project is not too big for FCP ?
Just occured to me with a still that was too big ...

Fcp 7 project through compressor 3.5 or share re: creating blu ray disc

Am I missing something but it seems you can't send a fcp project to compressor 3.5 via the "send to" option as there isn't any appropriate settings for blu ray, only HD DVD.
But you can through the share option. Is that the case or am I just getting too old for all this new high tech stuff??
"Roger Retired"

Hi iamfrustrated
I'll have to tell you I don't have much experience with compressor, I've been using Episode to transcode my DVD files and Encore to author my DVD's and I am just getting started with burning Blu-ray. But I would think you could simply burn a Blu-ray disc image to your hard drive from within compressor and then even use toast if you want to turn make additional copies. Is that perceivable?
Ron

Canvas disappear on sending multiple requests specifically from IE 11

I have a page which displays few javascript charts on it. I am using RGraph chart API to generate charts. The charts are been generated from a separate Ajax call.
The page is working fine with IE 7, 8, 9 and 10. Then recently I have upgraded to IE 11. After upgrade the page is not working as intended. On performing refresh operation for about 3-4 times, section of some charts are been disappers. It displays
blank section instead of chart. And random charts gets disapper. It is not fix that some specific charts will fade away.
And when this issue occur, all the CSS on the page goes messy.
I have checked for any javascript related error generated or not. But I didn't found any javascript error on the console.
I have checked from development tool. The canvas tag is available, bit it does not display on the page. It shows a blank section instead.
Any idea why this is happening?
I have moved this question from IE 11 Community Support Forum. Here is the link of the forum.
http://answers.microsoft.com/en-us/ie/forum/ie11-iewindows8_1/canvas-disappear-on-sending-multiple-requests/c433cf9b-fb82-48f1-8554-ebb3354795fe

I have a page which displays few javascript charts on it. I am using RGraph chart API to generate charts. The charts are been generated from a separate Ajax call.
The page is working fine with IE 7, 8, 9 and 10. Then recently I have upgraded to IE 11. After upgrade the page is not working as intended. On performing refresh operation for about 3-4 times, section of some charts are been disappers. It displays blank
section instead of chart. And random charts gets disapper. It is not fix that some specific charts will fade away.
And when this issue occur, all the CSS on the page goes messy.
I have checked for any javascript related error generated or not. But I didn't found any javascript error on the console.
I have checked from development tool. The canvas tag is available, bit it does not display on the page. It shows a blank section instead.
Any idea why this is happening?
I have moved this question from IE 11 Community Support Forum. Here is the link of the forum.
http://answers.microsoft.com/en-us/ie/forum/ie11-iewindows8_1/canvas-disappear-on-sending-multiple-requests/c433cf9b-fb82-48f1-8554-ebb3354795fe
Hi,
In order to get your issue solved more efficiently, I would recommend you post another thread in
https://forums.asp.net forum to get dedicated supports, since based on your description, you are having this issue with your web applications and that forum is for web development issues.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I still distribute most FCP projects via DVD. No matter which MPEG2 setting I use in Compressor 4 I get an error - even Apple's default DVD setting. Has anybody successfully output an FCP X project to compressor and then out on a DVD?

I still distribute most FCP projects via DVD. No matter which MPEG2 setting I use in Compressor 4 I get an error - even Apple's default DVD setting. Has anybody successfully output an FCP X project to compressor and then out on a DVD?

Anthony, thank you very much - this works, though I thought I had tried your process previously without success. I've tried so many things who knows. I've had zero luck going with the Send to Compressor or Export Using Compressor Settings under the Share menu. I'm also finding Compressor 4 to be a real dog on my system even though I have a brand new quad core machine with 8G of RAM. Prior to receiving your post I did come up with a different work process. Using Export Movie from FCP X and then loading the result in Compressor 3 works flawlessly. Thanks again!

Exporting multiple projects from FCP timeline hangs

When rendering multiple projects from Final Cut Pro's timeline through compressor, I get varied results. I am rendering 3 files - Apple Pro Res, MPEG-2 (VBR Highest quality for Blu-Ray), & 48khz AIFF audio file.
Typically we will set up 3 projects for one night to render overnight (30 minutes to 1 hour for each project). In the morning when we come in compressor will sometimes show up as 90 hours remaining, sometimes it will still be cranking out on the last project with 12 hours remaining. If we leave it going it will eventually finish. However when we shut everything down, reboot computer, start export from timeline and it completes the render in HALF the time compressor stated remaining before we closed it. Each project typically takes 6-8 hours to get all three files (pro res, MPEG-2, AIFF) we allow 18 hours for render.
Drive space should not be an issue. We have a 5 TB array (typically has 2 TB free for 4 projects), system drive has 350 GB free and the 4 projects rendered out will take up approximately 300 GB. The project reads, and writes to the array for everything.
Any help on trying to figure out why compressor slows down over time. Once restarting compressor goes as expected.
Thanks for the help in advance.
Don
All software is up to date latest versions of FCP and Compressor.

This is like an EDL...Edit Decision List. This basically is a metadata rich document that is used to transfer clip information between systems. You can export an XML from FCP 7 to FCP 6 so that you can open a sequence, or a project. Export an XML of the sequence and open that up in Excel to have clip name, reel and timecode information for tracking footage.
No media is enclosed in this file.

Why can't I send multiple texts any more? I am on iphone 5 and it is only allowing me to send messages to 10 people at once! Previously on iphones 3 and 4s I could send to many more.

Why can't I send multiple texts any more? I am on iphone 5 and it is only allowing me to send messages to 10 people at once! Previously on iphones 3 and 4s I could send to many more. I use my phone for work and want to send to multiple staff groups or project leaders the same information at the same time and not all of them have email capable phones so text has always been the best solution.
Please help ?

22ms is a long time for your computer, but I am wondering about your network. Are you 10 base or 100 base? Switch or hub? Have you tried a direct connection with a crossover cable? Just trying to spark ideas here. I use TCP all the time but only at 500 ms intervals.

Sending multiple email for free goods item category??

Hi,
we have requirement to send email (Z report in smartforms) automatically when sale order save in tcode VA01/VA02.
we made reqd config in tcode NACE and we set access sequence on ORDER TYPE and it's working fine. but the problem is that when order booked for item category free goods it sends multiple emails. (i.e. no. of line items = no. of email) for one order no. All other item category is working fine. only problem with the free goods.
I am an abaper. all config are made with the consent of SD consultant.
pls help.
thanks
Radhashyam Sahoo.

If you are an ABAPer, then it sounds like you simply need to debug the processing to identify where/why the fault occurs. As for the NACE settings, you should understand the config as well as your functional counterpart. It will make you a better developer and help you understand the processing code.

I have tried a lot to find an app or some way in email to attach multiple of pdf files in one email. I could not find anything that sends multiple pdf file in one email and still keeping the file in simple pdf format for the recipient.

I have tried a lot to find an app or some way in email to attach multiple of pdf files in one email. I could not find anything that sends multiple pdf file in one email and still keeping the file in simple pdf format for the recipient.

I am not aware of a way except for photos that allows you to select multiple files in an email. I even checked settings in the Adobe Reader app, and it does not show that ability.

Sending multiple files using one socket

Hi guys
I'm working on a simple app that sends multiple files over LAN or I-NET. The problem is that the app run seems to be non-deterministic. I keep getting this error on the client side:
java.io.UTFDataFormatException: malformed input around byte 5
        at java.io.DataInputStream.readUTF(Unknown Source)
        at java.io.DataInputStream.readUTF(Unknown Source)
        at service.DownloadManager.storeRawStream(DownloadManager.java:116)
        at service.DownloadManager.downloadFiles(DownloadManager.java:47)
        at manager.NetworkTransferClient$1.run(NetworkTransferClient.java:104)The byte position changes every time I run a transfer. The error is caused by this line: String fileName = in.readUTF(); Here's the complete code:
Client
private void storeRawStream() {
        try {
            FileOutputStream fileOut;
            int fileCount = in.readInt();
            for(int i=0; i<fileCount; i++) {
                byte data[] = new byte[BUFFER];
                String fileName = in.readUTF();
                fileOut = new FileOutputStream(new File(upload, fileName));
                long fileLength = in.readLong();
                for(int j=0; j<fileLength / BUFFER; j++) {
                    int totalCount = 0;
                    while(totalCount < BUFFER) {
                        int count = in.read(data, totalCount, BUFFER - totalCount);
                        totalCount += count;
                    fileOut.write(data, 0, totalCount);
                    fileOut.flush();
                    bytesRecieved += totalCount;
                // read the remaining bytes
                int count = in.read(data, 0, (int) (fileLength % BUFFER));
                fileOut.write(data, 0, count);
                fileOut.flush();
                fileOut.close();
                transferLog.append("File " + fileName + " recieved successfully.\n");
        } catch (Exception ex) {
            ex.printStackTrace();
    }Server
public void sendFiles(File[] files) throws Exception {
        byte data[] = new byte[BUFFER];
        FileInputStream fileInput;
        out.writeInt(files.length);
        for (int i=0; i<files.length; i++) {
            // send the file name
            out.writeUTF(files.getName());
// send the file length
out.writeLong(files[i].length());
fileInput = new FileInputStream(files[i]);
int count;
while((count = fileInput.read(data, 0, BUFFER)) != -1) {
out.write(data, 0, count);
bytesSent += count;
fileInput.close();
out.flush();
Does anybody know where's the problem? Thanx for any reply.

Send the length of each file ahead of each file, with DataOutputStream.writeLong().
When reading, read that long, then stop reading bytes when you've read exactly that length.

Send multiple email attachments using FM SO_NEW_DOCUMENT_ATT_SEND_API1.How?

Hi All,
I have a requirement to send email to an external ID for which I am using FM SO_NEW_DOCUMENT_ATT_SEND_API1.Can anyone give a sample code to send multiple excel attachments using this function module.
Points would be rewarded.
Thanks
Archana.

Check the Thread,,
Re: more than 1 attachements/sheets in SO_DOCUMENT_SEND_API1

[Forum FAQ] How do I send multiple rows returned by Execute SQL Task as Email content in SQL Server Integration Services?

Question:
There is a scenario that users want to send multiple rows returned by Execute SQL Task as Email content to send to someone. With Execute SQL Task, the Full result set is used when the query returns multiple rows, it must map to a variable of the Object data
type, then the return result is a rowset object, so we cannot directly send the result variable as Email content. Is there a way that we can extract the table row values that are stored in the Object variable as Email content to send to someone?
Answer:
To achieve this requirement, we can use a Foreach Loop container to extract the table row values that are stored in the Object variable into package variables, then use a Script Task to write the data stored in packages variables to a variable, and then set
the variable as MessageSource in the Send Mail Task.
Add four variables in the package as below:
Double-click the Execute SQL Task to open the Execute SQL Task Editor, then change the ResultSet property to “Full result set”. Assuming that the SQL Statement like below:
SELECT   Category, CntRecords
FROM         [table_name]
In the Result Set pane, add a result like below (please note that we must use 0 as the result set name when the result set type is Full result set):
Drag a Foreach Loop Container connects to the Execute SQL Task.
Double-click the Foreach Loop Container to open the Foreach Loop Editor, in the Collection tab, change the Enumerator to Foreach ADO Enumerator, then select User:result as ADO object source variable.
Click the Variable Mappings pane, add two Variables as below:
Drag a Script Task within the Foreach Loop Container.
The C# code that can be used only in SSIS 2008 and above in Script Task as below:
public void Main()
   // TODO: Add your code here
            Variables varCollection = null;
            string message = string.Empty;
            Dts.VariableDispenser.LockForWrite("User::Message");
            Dts.VariableDispenser.LockForWrite("User::Category");
            Dts.VariableDispenser.LockForWrite("User::CntRecords");
            Dts.VariableDispenser.GetVariables(ref varCollection);
            //Format the query result with tab delimiters
            message = string.Format("{0}\t{1}\n",
                                        varCollection["User::Category"].Value,
                                        varCollection["User::CntRecords"].Value
           varCollection["User::Message"].Value = varCollection["User::Message"].Value + message;
           Dts.TaskResult = (int)ScriptResults.Success;
The VB code that can be used only in SSIS 2005 and above in Script Task as below, please note that in SSIS 2005, we should
change PrecompileScriptIntoBinaryCode property to False and Run64BitRuntime property to False
Public Sub Main()
        ' Add your code here
        Dim varCollection As Variables = Nothing
        Dim message As String = String.Empty
        Dts.VariableDispenser.LockForWrite("User::Message")
        Dts.VariableDispenser.LockForWrite("User::Category")
        Dts.VariableDispenser.LockForWrite("User::CntRecords")
        Dts.VariableDispenser.GetVariables(varCollection)
        'Format the query result with tab delimiters
        message = String.Format("{0}" & vbTab & "{1}" & vbLf, varCollection("User::Category").Value, varCollection("User::CntRecords").Value)
        varCollection("User::Message").Value = DirectCast(varCollection("User::Message").Value,String) + message
        Dts.TaskResult = ScriptResults.Success
End Sub
Drag Send Mail Task to Control Flow pane and connect it to Foreach Loop Container.
Double-click the Send Mail Task to specify the appropriate settings, then in the Expressions tab, use the Message variable as the MessageSource Property as below:
The final design surface like below:
References:
Result Sets in the Execute SQL Task
Applies to:
Integration Services 2005
Integration Services 2008
Integration Services 2008 R2
Integration Services 2012
Integration Services 2014
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Thanks,
Is this a supported scenario, or does it use unsupported features?
For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
in a supported way?
Thanks! Josh

Sending multiple projects to compressor

Similar Messages

Maybe you are looking for