Sending  OBIEE  reports to non OBIEE users who are external to SMTP server

Hi All,
Hi Nazza,
Would you please help me how you diid send reports to non OBIEE users (external mails)?
I have configured the mail server and able to send reports to internal mails.
I have followed the following steps as mensioned in all blogs:
1. I created a d table called SA_SYSTEM_USER with default columns as mensioned.
2. Imported into Physical Layer
3. Created a view for Dummy table(Dual) with 'DUMMY' column.
4. Joined these tow tables DUMMY fact and SA_SYSTEM_USER as Dimension on DUMMY join Email.
5. Renamed columnsfor Presentaion table as mensioned in Bolgs.
6. Restarted the servers.
7. I noticed the system mail and system delivery profile created with only one email id(where are the other email ids from my SA_SYSTEM_USER table?)
8. But as written in blogs it never sends emails to external mails e.g. [email protected](this is existng mail in SA_SYSTEM_USER)
I am in need of urgent solution please some one help me out....
Thank you so much.....

Hi Deepak,
I followed every single step mensioned in the link you have given.
When save the iBot there was no response.
Would yu please clarify these doubts:
1. Do I need to have any specific settings on our SMTP mail server to send emails to external email-ids ????
2. I can see only one email account appears in My Account-->Active Profile. where I loaded 2 email accounts in my User table. Does it matters while I am choosing 'Specific Devices' on 'Destinations' Tab while deselecting 'Ineractive Dashboard' and 'Active Delivery Profile'?
3. By default the report is going to that mail account (internal only) if I select Destinations--> Active Delivery Profile.
4. As mmy requirement is to send emails to the users external to organization( external to our local SMTP server distribution list), I entered my Gmail account to test.
When save the iBot there was no response.
5. Do I need to set filter on specifc user on a conditional request to send e-mai to that usel??
6. Is there any solution for this please? Thsi is a must requiremnet.
My Thought (I am not sure) : 1. I create those user IDs on SMTP server
2. send reports to this user list.
3. From these user ID mail inbox of SMTP server if possible: forward those reports to external email IDs.
Thank you for your time
Regards

Similar Messages

  • Send a OBIEE report to non OBIEE user (Client) Mail in OBIEE11g

    Hi Frenz,
    i`m fresher to OBIEE, i need the step for "Send a OBIEE report to non OBIEE user (Client) Mail in OBIEE11g". searched in on-line got only OBIEE 10g Documents that one also followed but no result.Please help Me....the Step to config a Mail for external user.
    Thnaks,

    Have the SMTP server configured by your admin and create agent privilege given to your role. Then Schedule an Agents to yourself/Testuser with the report to be sent to external user as its Content. Set up the Delivery Profile of the recipient. In the set up for email device - delivery profile specify the external email address. This might be useful
    http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi11115/delivers/alerts.htm
    Thanks.

  • Send a OBIEE report to non OBIEE user (Client) in Mail OBIEE 11g

    Hi Frenz,
    i`m fresher to OBIEE, i need the step for "Send a OBIEE report to non OBIEE user (Client) Mail in OBIEE11g". searched in on-line got only OBIEE 10g Documents that one also followed but no result.Please help Me....the Step to config a Mail for external user.
    Thnaks,

    This is the Oracle Forms forum. Please post on the appropriate forum here https://forums.oracle.com/forums/category.jspa?categoryID=16

  • Delivering the crystal formated reports to users who are not defined BO/SAP

    Hi,
    The requirement is to send the crystal formatted report to number of users who are not in BO/SAP System. Can we use the whole dynamic contact list for automated personalization and distribution to people not set up as a user in the system?
    Can we deliver a publication to the users who are not at all defined in the BO system or any SAP system
    its to the users who are all together different vendors who do not have any login.
    Please let me know if this is possible via publication if possible could any one provide me any doc which states the same
    Thanks in Advance,

    Moved to BOE Admin forum.
    I assume you are using a BOE Scheduling options to distribute your reports?
    Check the Scheduling Guide and formats for more info.
    And yes simply send them a DPF file and set up a Group in your e-mail Server, or individual if that works better. More work though.
    Don

  • Share Analytics Reports with non-Siebel Users

    Hello,
    We are on version 7.8.2.4 of Siebel Analytics and are on a UNIX platform.
    I am working on a project that is required to share reports with non-Siebel users. We are hoping to accomplish this through Analytics Delivers, but are open to suggestions or alternatives.
    I have found that an iBot (under the Advanced tab) can be used in conjunction with custom Javascript or VB to FTP the report results in a pdf format to a specified location on the server. The Analytics Scheduler Bookshelf document explains how to do this starting on page 50.
    However, there is a note within this document that says this functionality is only supported on Windows platforms. Unfortunately, our servers are on a UNIX platform. I have been told the possible reason for only supporting this functionality on a Windows platform is because there is not a service analogous to the ActiveX Scripting.FileSystemObject control which is called in the Javascript described in the document mentioned above.
    This leads me to my question: Has anyone ever used this custom Javascript functionality with iBots on a UNIX platform or is there a similar approach that can be used instead? Has anyone found another way to share Analytics reports with non-Siebel users?
    Thanks,
    Andrea Thomas
    [email protected]

    Hi Andrea,
    I don't have experience with ftp-ing a pdf to a specific location. But I do have 2 alternatives:
    1. Use a public dashboard
    http://oraclebizint.wordpress.com/2008/06/30/oracle-bi-ee-1013332-public-reports-and-dashboards-bypassing-authentication/
    2. Set up SA System subject area, to email the pdf to non-Siebel Analytics users.
    http://oraclebizint.wordpress.com/2008/04/25/oracle-bi-ee-101332-sa-system-subject-area-autoloading-profiles-and-bursting/
    In the external table you use for the SA System subject area, it is possible to add 'fake' users with their e-mail addresses.
    Regards,
    Stijn

  • Automatic deletion of users who are not responsible from sending mail list.

    Hi ,
    i have designed a workflow where mail will be sent to 5 users. my requirement is mails should be  deleted automatically from users who are nor resposible . please guide me.
    Thanks and regards.
    kasturi

    Hi,
    i have designed a workflow where mail will be sent to 5 users.
    Are you picking the 5 User via coding, If yes you can restrict in the coding
    my requirement is mails should be deleted automatically from users who
    are nor resposible .
    You mean to say you want to Send Mail to the User's who receive the Workitem.
    If yes, you can achieve via Extended Notification.
    If No, can you please explain your requirement?
    Regards,
    Surjith

  • Sending Stationary Mail to non-Mac users

    Has anyone experience with sending Stationary mail to non-Mac users? The html files that are created in mac OS X require "downloading" when received on PCs. Does this depend on html friendly servers or some settings? Any suggestions?

    Having stationary in e-mail is not a new concept. Microshaft was doing it years ago with Outlook Express. The short answer is that you can send e-mail with stationary to a user on any platform.
    The need to download the graphics is purely a client side issue. Automatic downloading of graphics in e-mail is normally disabled by default on most modern e-mail clients.
    This is due to the fact that spammers would include a picture in their message that was actually homed on a remote server. Once your machine downloads the remote graphic to display in the message, the spammer knows that your e-mail address is valid.
    If your client, regardless of whether you are on Windows, OS X, or even web based, if configured to automatically download graphics then stationary will work.

  • IPhone 4s wont send picture messages to non iPhone users.

    I've tried reinstalling the IOS 6, changing the settings, shutting off the phone. I can not send picture messages to non iPhone users but can send texts and receive texts and receive picture messages. just can't send. Help.

        jannwj, sending and receiving pictures is very important these days because we try to capture the moment all the time. I know this issue is frustrating because I take, send, and receive pictures at least 20 times a day. I researched  your issue and did not find this as a known issue. Do you receive a error message? I recommend checking your message settings to ensure they are enabled. I have listed the steps below:
    1) From the home screen, select Settings.
    2) Select Messages.
    3) From MMS Messaging, drag the switch left or right to enable / disable.  Enabled when set to ON.
    Please let me know if this helps. Also ensure the data network is enabled. I have listed steps below:
    1) From the home screen, select Settings.
    2) Select General.
    3) Select Cellular.
    4) Drag the Cellular Data switch left or right to enable / disable cellular data.
    On /Celluar data enabled
    Off /Cellular data disabled
    Keep us posted with the status of your issue.
    KinquanaH_VZW

  • Iphone 4 wont send picture messages to non iphone users

    im having this issue with my iphone where it wont send picture messages to non iphone users. this problem is all of a sudden, it used to work and now its not.  ive checked to see that my mms messages are turned on in settings and it still wont send. also picture messaging is included in the plan i have for the phone. any advice?
    thank you

    I downgraded back to 5.1.1 and I'm not having the problem I'm also on a gophone prepaid plan idk if that's te problem

  • Message tracking log of internal users who are all sent the mails to external domain

    Hi ,
    How can i get the message tracking log from internal users to external users?
    We need the report of internal users who are all sent the mails to the external domain
    Regards,
    Sankar M
    Sankar M http://messagingdevelopment.blogspot.in/

    Sankar, your outbound send connector has an address space of *. So when you run "Get-SendConnector", you will see something like the following:
    Identity                                AddressSpaces                          
    Enabled
    Unix System Connection                  {SMTP:*.domfreebusy.contractor.hunti... True
    Outgoing SMTP Connector                
    {SMTP:*;10}                             True
    Mailbox Journaling Connector            {SMTP:pdwastap01.huntington.com;1}      True
    The middle one with the {SMTP:*;10} in my case (you may have a different number than 10 in yours) is my outbound connector. So yours will show an address space of {SMTP:*;<some number, 10 is the default>}. HTH ...

  • Deactivate users who are no longer exist in AD but were added into resource pool

    Hello forum members,
    does anyone know how to deactivate users who are no longer exist in AD , but were added into resource pool?
    I an trying to write some code that would update a custom value for each resource, but my code breaks whenever it encounters a resource that is not longer exists in AD. Any suggestions are appreciated.
      // Modify the resources, code was taken from http://msdn.microsoft.com/en-us/library/websvcresource.resource.updateresources(v=office.12).ASPX
                    foreach (SvcResource.ResourceDataSet.ResourcesRow resourceRow in resourceDs.Resources)
                        Console.WriteLine("Check out " + resourceRow.RES_NAME);
                        if (resourceRow.IsRES_CHECKOUTBYNull())
                            resourceSvc.CheckOutResources(new Guid[] { resourceRow.RES_UID });
                            checkedOut = true;
                        else
                            if (resourceRow.RES_CHECKOUTBY == me)
                                checkedOut = true;
                            else
                                checkedOut = false;
                                Console.WriteLine("\tCan't check out this resource, skip updating this one.");
                        if (checkedOut)
                            SvcResource.ResourceDataSet updateDs = resourceSvc.ReadResource(resourceRow.RES_UID);
                                if (resourceRow.RES_TYPE <= (int)PSLibrary.Resource.Type.INACTIVATED_OFFSET)
                                    updateDs.Resources[0].RES_CODE = "A" + rand.Next(1000, 9999);
                                    Console.WriteLine("Update RES_CODE to " + updateDs.Resources[0].RES_CODE);
                                    resourceSvc.UpdateResources(updateDs, false, false);
                                    Console.WriteLine("Check in " + resourceRow.RES_NAME);
                                    resourceSvc.CheckInResources(new Guid[] { resourceRow.RES_UID }, false);
                        Console.ForegroundColor = ConsoleColor.Yellow;
                        Console.WriteLine("".PadRight(30, '-'));
                        Console.ResetColor();
    tatiana

    This is the logic I used:
    1) Try to inactivate the user
    2) If it fails with "AdminNTAccountNotFound" then delete
    try {
    using( OperationContextScope ocs = new OperationContextScope( resourceClient.InnerChannel ) ) {
    resourceClient.CheckOutResources( new Guid[] { resourceUID } );
    // Perform the update
    rsDS = ( SvcResource.ResourceDataSet ) rsDS.GetChanges();
    resourceClient.UpdateResources( rsDS, false, true );
    catch( Exception ex ) {
    if( ex.Message.Contains( "AdminNTAccountNotFound" ) ) {
    try {
    resourceClient.CheckInResources( new Guid[] { resourceUID }, true );
    catch {
    //The resource does not have a valid account, deleting...
    using( OperationContextScope ocs = new OperationContextScope( resourceClient.InnerChannel ) ) {
    resourceClient.CheckOutResources( new Guid[] { resourceUID } );
    resourceClient.DeleteResources( new Guid[] { resourceUID }, "No longer in RBS structure and/or AD" );
    120811049008

  • How to list of Users who are using Crystal XI application?

    Hi all,
    Thanks for your support provided so far.
    I need to get the list of users who are all using the Crystal XI application. I tried to get this info from the Business Objects Enterprise Applications in CMC but it was not there. Where can I find this information?
    kindly help me.
    Thanks,
    Bhuvan R

    There is not such a portlet available out of the box...
    Have you looked at the code share section?
    If you want to develop yourself, I don't think this is achievable using the IDK (remote interface)
    But It is definitely possible to create such a portlet using the server API (drawback: the portlet has to live where a portal component is installed - WS, automation or Portal)

  • How to skip approving steps for users who are also approvers?

    We have a business need to be able to skip the approving steps for the users who are also approvers.
    For this following steps were followed :-
    1) Open .task file and go into the Assignment tab. Double click on the performer box within the routing slip, this should open the "Edit Participant Type" editor. Expand the "Advanced" section and place a check next to "specify skip rule", then click the edit icon to the right. Now enter an XPath expression that will test whether the current user is equal to the task creator.
    2) We used - isUserInRole XPath function in the "Identify Service Functions" dropdown - first param to function is the userID, the 2nd is the role name.
    We tried with hardcoded userID as well as by using
    ids:isUserInRole(/task:task/task:systemAttributes/task:updatedBy/task:id,'California')
    where 'California' is the group name (as one of the forum threads told this function works with groups).
    We also tried with swimlane roles(using bpm.getPerformer() function) but it does not work either.
    Please let me know if any one has any solution to this problem.

    session as DirectorySession = DirectorySession.currentEngineSession
    dirHum as Fuego.Fdi.DirHumanParticipant = DirHumanParticipant.fetch(session : session, id : "myUserId")
    result = hasRoleAssigned(dirHum, role : "Approver")Give that a try...
    HTH,
    -Kevin

  • Getting Lync enable users who are modified after specified time

    Getting Lync enable users who are modified after specified time
    Hi,
    I need to get all the Lync enabled users from Lync 2010 server who are modified after specified time.
    I have written a client with this below code for my purpose
    string
    dateString = "11/4/2014 11:19:10 PM";
    DateTime
    lastModifiedTime = DateTime.Parse(dateString, System.Globalization.CultureInfo.InvariantCulture);
    PSCommand command = new PSCommand();
    command.AddCommand("Get-CsUser");
    command.AddParameter("Filter",
    "WhenChanged -gt " + lastModifiedTime.ToString());
    powershell.Commands
    = command;
    Collection<PSObject> outPut = powershell.Invoke();
    But on calling Invoke method I am getting the below exception,
    Cannot bind parameter 'Filter' to the target. Exception setting "Filter": "Invalid cast problem for value: "11" type: "System.Nullable`1[System.DateTime]" query: "WhenChanged -gt 11/4/2014 11:19:10 PM" "17""
    Can anyone please point me what am I doing wrong.
    This command
    Get-CsUser -filter {whenchanged -gt
    "11/4/2014 11:19:10 PM"}
    when run directly on Windows Powershell works fine.
    Thanks in advance.
    Sandeep

    It appears you may be casting the date variable wrong. 
    If you have
    command.AddParameter("Filter",
    "WhenChanged -gt 11/4/2014 11:19:10 PM"
    And avoid the lastModifiedTime.ToString() addition, does it work?
    If so, it's just the way you're doing your date manipulation.
    Also, why convert from a string to a datetype and back for the datestring?  Are you trying to correct a timezone issue?
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications
    This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Using imessenger is it free to chat with iphone users who are in another country?

    Using imessenger is it free to chat with iphone users who are in another country?

    my understanding is yes because it worked with ipod touches via your Apple ID and there is no payment process agreement when setting up iMessage.

Maybe you are looking for