Sending of message failed.

When sending an email I get the following:
Sending of message failed.
The SMTP server smtp-server.cfl.rr.com does not seem to support encrypted passwords. If you just set up the account, please try changing to 'Password, transmitted insecurely' as the 'Authentication method' in the 'Account Settings | Server settings'. If it used to work and now suddenly fails, this is a common scenario how someone could steal your password.

You would do better to start you own thread and actually state your problem with any details that you have. The error messages tells you to check your server settings.
FYI: IMAP is for inbound email so if you are having problems sending, the IMAP server has nothing to so with that. SMTP servers send email.

Similar Messages

  • HT4863 I have an error message coming up when trying to send an email which says 'sending the message failed because you're exceeding the limit' can anyone help me to resolve this please

    I have an error message coming up when trying to send an email which says 'sending the message failed because you're exceeding the limit' can anyone help me to resolve this please

    Try reentering the password in your iCloud mail settings.

  • Error message when sending mail : sending the message failed because you have exceeeded your sending limit"

    I was trying to email a link from a webpage I loaded in safari.  The email sits in my outbox with a red exclamation point.  WIll not send.  Keeping getting an error message sending the message failed because you have exceeded your sending limit

    "I keep getting a "you have exceeded your limit" on my email."
    No explanation, makes no sense, it's happening with others.
    I have to change (in my outgoing/unsent folder) my sending address from .mac to me.com. After reading the following helpful post:
    To get outbox individual mails sent, Try going to outbox, opening each email to edit and change sending email to [email protected] by clicking arrow in from line.  If [email protected] account does not show, go to settings > mail > icloud account > add "[email protected]"  And, until this issue is resolved, set mail to send from [email protected]
    (and you should be using smtp.mail.me.com)

  • Sending of message failed. Unable to open the temporary file C:\Users\Admin\AppData\Local\Temp\nsemail.eml. Check your 'Temporary Directory' setting.

    after opening an email I knew to be a phishing attempt, I forwarded it to my bank's spam/phishing email address. I did NOT click any link in the suspicious email. only forwarded it.
    now when I try to send an email I get the following error message:
    Sending of message failed.
    Unable to open the temporary file C:\Users\Admin\AppData\Local\Temp\nsemail.eml. Check your 'Temporary Directory' setting.
    I can't find a temp directory. where is this and how do I fix it?

    Try to start *Windows* in safe mode with networking enabled.
    - Win8 http://windows.microsoft.com/en-US/windows-8/windows-startup-settings-including-safe-mode
    - Win7 http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode
    - XP http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx
    Still in Windows safe mode, start Thunderbird in safe mode.
    - https://support.mozilla.org/en-US/kb/safe-mode
    Does the problem go away?

  • When sending email message appears "sending the message failed because you exceeded your sending limit. A copy has been placed in you outbox"

    When sending email message appears "sending the message failed because you exceeded your sending limit.  A copy has been placed in your outbox"

    Who's the provider? Do they have a limit?
    https://discussions.apple.com/message/22929931#22929931

  • I keep getting this message:Sending of message failed (see below)

    My email was hacked recently so I changed my password. I can receive emails but not send them. My email is a talktalk one and I use the Thunderbird system. Now, when I try to send I get the following message: Sending of message failed.
    Unable to open the temporary file C:\Users\LynWW\AppData\Local\Temp\nsmail.tmp. Check your 'Temporary Directory' setting.
    Can you help?
    Thanks
    Lyn

    It looks like you are trying to select a patch of grass with the rectangular marquee tool.
    OK.  Do that. Now place the patch on its own layer (Layer>new>layer via copy or CTRL+J)
    Use the move tool to position the patch where you want it.

  • CIDX Adapter: HTTPS communication with certificates- Send of message failed

    Hi,
    As per a requirement, I have configured CIDX Receiver adapter so as to send a message to a URL. But unable to send a message and in the audit log of message monitoring it has run into error as given below:
    <i>Error during collaboration agreement facade processing -
    Party configuration for Party=EDI_XML_Test, PartySchema=DUNS, PartyAgency=016 not found -
    normalising the initiating party-id failed : Party configuration for Party=EDI_XML_Test, PartySchema=DUNS, PartyAgency=016 not found</i>
    For your information:
    1. I have got certificates loaded into the environment.
    2. When I use a different adapter like file adapter, for the same configuration, I am able to send the message to the destination.
    Let me know anything I am missing.
    Regards,
    Vijay

    Hi,
    For additional information, I got more in audit log of monitoring as given below:
    <i>Delivering to channel: CC_CIDX_Receiver
    Error during collaboration agreement facade processing -
    Party configuration for Party=EDI_XML_Odyssey, PartySchema=DUNS, PartyAgency=016 not found -
    normalising the initiating party-id failed : Party configuration for Party=EDI_XML_Odyssey, PartySchema=DUNS, PartyAgency=016 not found
    Exception caught by adapter framework: Error during collaboration agreement facade processing
    Delivery of the message to the application using connection AFW failed, due to: Error during collaboration agreement facade processing.</i>
    If anybody knows, let me know how to resolve this issue.
    Thanks & Regards,
    Vijay

  • Sending of message failed. No sender was specified. Please fill in your email address in the Mail & Newsgroups account settings.

    This message is received when trying to send a new e-mail.

    Start here: https://support.mozilla.org/en-US/kb/cannot-send-messages
    If that doesn't help, give us your OS (Win, MAC, Linux), TB version, and your 'Outgoing Server (SMTP)' settings.

  • Sending of message failed. Just started in the last hour or two.

    I can send using other E-Mail facilities such as Virginmedia's own but not on Thunderbird.

    Try to clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Send Message Fails

    When I try to send a message, a dialog appears that says "Status: Assembling message . . .", then after a few seconds, a Send Message Error dialog appears that says "Sending of message failed. Please verify that your Mail & Newsgroups account settings are correct and try again."
    1. The "Status: Assembling message..." dialog never used to appear and the emails went out fine.
    2. I have checked the account server settings and they ARE correct. I tested them and the server likes them. Error message fails to specify exact cause of failure, so it is of no help.
    3. I removed my user account and recreated it. Same problem, except now my archives and inbox are empty. (Fortunately, I copied my Profile files to a backup location, so I suspect I may not have lost everything if I can figure out how to restore the data files and get TB to recognize the restored files.)
    4. I uninstalled the program and reinstalled it. Same problem, didn't fix it.
    5. I created a new account on a different server. Access codes test out properly. Same problem, doesn't send. My hairstyle looks terrible now after my pulling numerous patches of it out.
    I have done everything except give up and go to another email program and try to import my data or just start over. Solution is probably simple, but so deep in the hidden guts of the program that I can't find it.
    Where's the problem, and how do I correct it??

    To diagnose your problems with Thunderbird, try he following:
    *Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
    ; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.
    In this case I would put money on it being the anti virus. The most troublesome at the moment is Avast, but they all block outgoing connections from Thunderbird at different times and disabling email scanning, or SPAM filters, or enabling access in the firewall component or a combination of all of the above can be required.
    Safe mode identifies the probable source if things would as they should. It may also only be the account setup process the A/V messes up as well. Thunderbird makes many connection attempts when scanning for settings when they are not in the database (Or connection to the database is blocked by the Anti virus program) and the anti virus just does not faithfully report the results so you get silly error messages.

  • I can't SEND a message in Mozilla Thunderbird

    I was away from home for about 24 hours over Xmas eve & day. And when I arrived home, I couldn't SEND any emails. I can receive them, but I cant SEND them. The error message I get is: “Sending of message failed.
    The message could not be sent because connecting to SMTP server smtp.comcast.net failed. The server may be unavailable or is refusing SMTP connections. Please verify that your SMTP server settings are correct and try again, or contact the server administrator.”
    So PLEASE HELP ME. We're having a snowstorm here in Yarmouth Port, MA, so my PC guru can't get in.

    Thunderbird support is over here.
    [http://www.mozillamessaging.com/en-US/support/]
    or here:
    http://forums.mozillazine.org/viewforum.php?f=39

  • When I link file I get error message cannot save file to draft then I cannot send the message

    Using Hightail to link, I click link, the file uploads and the blue box appears in the email with the link but then when I try to send it I get an error message saying "Sending of message failed. There was an error attaching hightail.png. Please check if you have access to the file.".... Help!

    There could be a number of factors: under Tools/Account Settings/<i>accountname</i>/Copies & Folders, are drafts saved to an IMAP server folder or Drafts on Local Folders? The latter is recommended for IMAP accounts. Second, does the attachment size exceed your service provider's limits? Third, do you have ab anti-virus program scanning outgoing mail (disable that component if it's in place)?
    Otherwise, there could be a bug in the Hightail implementation in TB.

  • Error sometimes when sending a message

    When I hit the 'send' button after composing a message, I often get an error:
    Sending of message failed.
    Unable to open the temporary file C:\Users\[myname]\AppData\Local\Temp\nsmail.tmp. Check your 'Temporary Directory' setting.
    Dismissing the error message and clicking on 'send' again is usually successful.
    I've noticed this error seems to occur most commonly when I have spent considerable time writing a longer than normal message.
    Version: Thunderbird 24.3 under Windows 7 64-bit.

    I should add that the number anti-virus products which Thunderbird has a problem with does not indicate that the fault is elsewhere.

  • Cannot send email via AOL on iPad2 - "A copy has been placed in your Outbox. Sending the message content to the server failed."

    My CEO has an ipad2 and I set it up w/ AOL.  She cannot send any email via her AOL account from her iPad.  She gets a message that says "A copy has been placed in your Outbox. Sending the message content to the server failed."   We've tried it on wifi and on 3G (Verizon version).  I've removed the account and added it, I've tried setting it up as an IMAP account vs. using Apples standard AOL mail setting and nothing seems to work.  The SMTP settings are smtp.aol.com, port 587.  I've tried adding an alternate server/smtp, but I haven't been able to find anything that works.  Any advice or other people having this issue?  It works fine sending an email from her aol web mail.  And unfortunately, having her sign up for a gmail account is not an option.  Thanks

    Interesting.  Firstly I have been on AOL since the early 90s with no current intention to switch as my primary personal email account.
    I have two email accounts on my iphone - AOL and my email from my business website.  I deleted both and then recreated first the business account and then the AOL account.  Same error.  Then I wasn't sure what you suggested but I turned off the AOL SMTP server and selected the business email SMTP server by turning it on with the same result.  I still get the error "A Copy has been placed in your Outbox.  Sending the mssage content to the server failed."
    Perhaps this problem will get fixed by IOS 6.   AOL will not talk to me unless I pay and Apple says its not their problem.  So for the time being I use the AOL web interface in the iPhone's Safari to send emails from the phone.

  • TS3899 Tried all the tips on line. Every time I try to send an e-mail, it gives me this message, "A copy has been placed in your Outbox. Sending the message content to the server failed" Any help in how to resolve would be appreciated

    I went through all the steps to try to resolve getting the message in a box every time i try to send an e-mail. What next ?
    Message is " A copy has been placed in your
                        Outbox. Sending the message content to the server failed."
    Any assistance would be greatly appreciated. My internet works fine as I can send e-mails from my Yahoo account on my MAC no problem.
    Address is fine etc.

    How long has it been going on? I've had my yahoo mess up and if i wait a bit it resolves itself. Yahoo is doing something with their servers and it messes with your mail if your mail happens to be on one of those servers.

Maybe you are looking for