Sending only desired things from bi development to bi production

Respected All
i am trying to transport infoarea,infoobject catalog and infoobjects through one request but when i am cliking only on infoobject cataloog and sending the request, i am geting all the other things like infocube,transformation etc though i am not selecting them?
pls tell me how to send only those things which we want to send.
regards and thanks
abhay

Hi,
Please do as follows:
1) Go to transport connection
2) Select your objects and place them on right hand side
3) Select only neccessary objects
4) Manual collection
5) Run the execute button
6) assign a package
7) on the other screen check only objects that you would like to transport
8) Transport the same request to production

Similar Messages

  • Moving Central SLD from XI Development to XI Production ?

    Hi,
    Please advise what is the impact of changing Central SLD from XI Development to XI Production Server.
    Because during initial installation the XI production still not available so our Basis only install SLD in our XI development server and other SAP development like FI, BW also pointing to this SLD.
    now the XI production is ready. could i just install new SLD in production and changes all connection from
    dev to prod ?
    Please advise on the step that i have to do.
    Thank you and best Regards
    Fernand

    Hi,
    http://www.riyaz.net/blog/index.php/2008/05/28/xipi-step-by-step-guide-to-xi-transports-using-cms-part-i/
    http://www.riyaz.net/blog/index.php/2008/05/28/xipi-step-by-step-guide-to-xi-transports-using-cms-part-ii/
    http://www.riyaz.net/blog/index.php/2008/05/29/xipi-step-by-step-guide-to-xi-transports-using-cms-part-iii/
    Refer this article
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306 
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b01876ac-abbb-2a10-788e-95a7c5a5aeca
    Regards,
    Suryanarayana

  • Transportation of Work books from BW Development to BW Production

    Hi,
    I have Transported 0FIGL_C01 InfoCube from BW Development to BW Production and have loaded Data also.
    with the cube Queries have also come in the BW Production..
    But i did not get workbooks in BW Production?
    How to bring work books into BW Production?
    Please tell me step by step procedure
    Help will be greatly appreciated...
    Thanks in advance...
    This is ver urgent...

    Hi
    Unlike Queries, usually workbooks are saevd either under a role or under Favourites.  So if you have saved the your workbooks under a role, you need to have that role assigned to you to view the workbooks. The roles and profiles might be quite different in dev and QA because of authorisations, so look into them carefully. If the developer saves the workbook as a favorite can you still transport it and see it? After transporting the workbooks you will need to retransport the roles they are assigned to. Once the roles are transported after the Workbook transport ..all the workbooks are visible.. The  rule is to transport the roles only once and never after, else all workbooks contained in that role in the target system will be wiped out.
    Just for safety sake, it is a good idea to maintain all the workbooks on a secure location, so that in case they are wiped out, you can use these to re-establish them. We create our workbooks directly in production.You can also confirm this by going to RSA1 -> Transport Connnection -> Click on Object Types -> Expand Query Elements -> Query -> double click Select Objects -> Search by your query Technical name -> Transfer. Once you get ur Query and all its object in the righmost box, under Transport request column you should see the Request number that you have created for all the query elements you have changed. If this is not the case then you assign it by checking the transport box for the query and Transport button

  • My headphone jack is only playing things from one earphone.

    So I had a pair of headphones plugged into my iMac (acutally it's my school's. Oops). I had a sweater with a lining on the back of my chair as I was working, and at one point, I pulled the lining out of the sweater so I could put it on. This created a load of static, and when I went to unplug my headphones, I got a big static shock, and I heard a pop in the headphones. Now when I plug them into the computer, only the left side plays. I have duplicated this on another computer, and confirmed it with multiple sets of headphones. Is this a common problem? Is there anything I can do to help this?

    Hey X423424X, thank you for posting your reply in this discussion.  I was having headphone issues and had completely overlooked the obvious suggestion to check left/right balance in sound options.  You saved me from an embarrasing trip to the Apple Store... I would have felt like a goof when they opened sound preferences and saw that it was cranked over to the left side only.  I'm not sure how it got that way, but I'm grateful it was an easy fix.  Thanks again!

  • Restoring only certain things from itunes backup

    Hi,
    Something on my iPhone 4 is causing my battery to drain from 100% to empty in around 4 hours.  I know it's definitely no the battery because I have had it replaced and the battery is draining the same.  I have reset the phone so it just has the welcome screen on (like it does when you first switch it on when it is brand new).  The battery lasts ages when the phone is like this so it must be some setting or app I have installed causing the battery drain.  Because of this, I would like to just import my contacts from my iTunes backup so that I can start from scratch again, but I can't work out the best way to do this.
    Can someone help me do this please?
    Thanks

    The restore from backup process is all or nothing, there is no way to selectively restore data. If all you want are your contacts, just sync them from a supported contact application on your computer, back to your phone. If your contacts are not in a supported application, you will have to use third-party software to extract them from your iPhone backup:
    http://www.iphonebackupextractor.com/

  • Can we move InfoPath forms from development site to production site?

    From the question I mean only the form, not the site itself.
    Is there any way to move a InfoPath form from SharePoint development site to production site?
    Thanks,

    just publish it to production site
    http://office.microsoft.com/en-in/infopath-help/move-a-published-form-template-to-a-new-sharepoint-library-HP010102446.aspx
    Step 1: Publish the form template to the new document library
    Open the working copy of the form template in design mode.
    On the File menu, click Publish.
    In the Publishing Wizard, click To a SharePoint server with or without InfoPath Forms Services, and then click
    Next.
    In the Enter the location of your SharePoint or InfoPath Forms Services site box, type the location of the SharePoint site that contains the new document library that you want to move your form template to, and then click
    Next.
    On the next page of the wizard, click Document Library, and then click
    Next.
    Click Create a new document library, and then click
    Next.
    On the next page of the wizard, type a name and description for the new document library, and then click
    Next.
    Choose the fields in the form template that you want to appear as columns in the default view of the document library.
    How?
    Click Next.
    On the next page of the wizard, verify that the information shown is correct, and then click
    Publish.
    To open the document library and test the process for filling out a form that is based on this form template, select the
    Open this document library check box, and then click Close.
    The document library will open in a browser. When you click New on the list toolbar, a form based on this form template will open in Microsoft Office InfoPath.
    http://sharepoint.stackexchange.com/questions/17383/infopath-change-publish-location
    If this helped you resolve your issue, please mark it Answered

  • HT201320 iOS 7 Send only email address?

    I'm trying to configre an send only email address from my iOS device. Currently I get all my incomming mail from iCloud push. But I want to be able to send mail from my Gmail account. Since Apple doesn't let you send mail from other domains I need to configure a Gmail account on my device but I don't want it to check for mail. I have tried configuring an account manually but it won't let me continue if the incoming mail server is blank, and if I enter bogus values I get error messages when I open mail.
    Anyone have any ideas?
    Thanks

    I, too, am trying to figure this out.
    Mail should NOT try to suck down my inbox. I just want to set up an OUTGOING ONLY email account.

  • How to port database changes from development to a production environment

    How do I port database changes from the development to the production environment?
    I am using v8 and have always had to redo everything using the schema manager all over in the production environment. Is there an easy way to generate a script, for example to dump the database changes on the development machine to be executed later on the production machine?

    This should already be a clearly defined change control process. Once a procedure, function, package, trigger, or whatever completes the testing rounds, it should be promoted to production.
    Forgive me if it seems I'm trivializing, but I don't see the problem, just copy the object(s) from your software library (or development) into production using whatever tool works best or has been chosen. If you are doing data copies then you have various options again including good old export/import.

  • Transport from development server to production server in BW

    I need step by step procedure to transport contents from bw-development to bw-production server.
    please forward me if you have one .
    thanks
    ajit

    Hi Ajit
    Post this to BI form. I think that will be the right place for this query.
    BI Form
    BW transports
    Thanks
    Gaurav

  • When I send a text message from my iPhone response only comes back to my iPhone .  If I send from iPad, response only comes back to iPad. Whichever I used last is where response comes.  Responses are not coming to both anymore!  Please help?

    When I send a text message from my iPhone response only comes back to my iPhone .  If I send from iPad, response only comes back to iPad. Whichever I used last is where response comes.  Responses are not coming to both anymore!

    On both devices when you go to settings>messages>send and recieve how are poeple contacting you on each device?. e.g. email or mobile number.

  • I have to restore my phone from back up but in order to do it i had to update my software. now that my software is updated there isnt enough room on the phone to back up. is there a way to only restore certain things from the backup like contacts?

    i have to restore my phone from back up but in order to do it i had to update my software. now that my software is updated there isnt enough room on the phone to back up. is there a way to only restore certain things from the backup like contacts?

    Because it says it's incompatible when it can't be, I got hope. I get error messages all the time with my iPod and iPhone that it cannot sync and that 'this device is not capapble of connecting to iTunes' stuff. I literally forget that happened, plug it in again and it works, I later realize that iTunes made a mistake, they do that.

  • I downloaded a widget from apple and was unable to open it because a window appeared telling me that the developer was unidentified. How do I change the security preferences that allow me to only install apps from the Mac App Store?

    I downloaded a widget from apple and was unable to open it because a window appeared telling me that the developer was unidentified. How do I change the security preferences that allow me to only install apps from the Mac App Store?

    go to system preferences - security and privacy - under allow applications downloaded from - click on anywhere.

  • Can't forward PDFs, from one sender only, from BT ...

    Hi, I wonder if anyone can help me with this? 
    If I receive a PDF as an attachment to an email, into my BT yahoo webmail, from one particular sender only, and I forward it to someone else,  they don't receive the PDF attachment.
    This doesn't happen with PDFs from anyone else - I can forward them OK. It doesn't happen with the problem sender if they instead send to my hotmail account- then I can forward them ok.
    The sender doesn't have this problem with other people.
    It's like some weird problem between that sender and my BT yahoo email account.
    Can anyone shed any light? I have to receive PDFs from this sender every day, and forward them on to others! I'd like to avoid having to save them and re-attach, I just want to forward them in the usual way.
    Many thanks,
    Ellie.

    A poster recently had a problem downloading PDFs. It was all PDF that he received he was having the problem with. While the problem is not quite the same as yours the fix may work for you. He simply carried out a factory reset of the Homehub by pressing a pin into the red recess button for abt 20 secs. Waited till it all reset then tried and the PDFs downloaded.

  • When I try to download any thing from AppStore it only loads and loads it doesn't downloads plz help me

    pplz help me when I download any thing from AppStore it only loads and loads don't downloads

    Try closing the App Store and reset yor iPad. Double tap the home button and find the App Store app. Swipe the thumbnail preview of the App Store up off the top of the screen to close it. then hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen.
    If that doesn't work, try resetting your router. Unplug it for about 30 seconds then plug it in again.
    If that fails, reset all settings. Settings>General>Reset>Reset all settings. No data is lost, but all device settings have to be entered again.

  • Limit users to execute "SELECT" statemes only from SQL Developer

    Hi:
    Is there a way to control what SQL command can be executed from SQL Developer?
    I am trying to limit users to execute "SELECT" statements only from SQL Developer.
    I believe SQL*Plus used to have the product profile where I can control what SQL command can be executed from what user.
    Thanks in advance.

    There's nothing special in sqldev to enforce privileges, the database does all that already. See the database documentation on the GRANT and REVOKE statements. Basically, you would only want to grant SELECT privileges to your users...
    Have fun,
    K.

Maybe you are looking for