Sending photos in body of e-mail
I want to send an e-mail with a string of photos from iPhoto showing in the body of the e-mail. I get e-mails like that all the time and I had no problem doing that on a pc but I don't seem to be able to do that on a Mac. My friend who had had a Mac before I got mine said that Macs can't do that. Is that right? I can't believe that's the case.
I want to post the photos like this in the e-mail body:
*
After copy-and-paste, then hit the return key, it should spit out my email address. (I prefer to use this method to disclose email address - it doesn't leave my address out there wide open for spambots to troll.) Then copy that email address to an email and try to send me a picture.
And you saw my "don't include the ⏎" that I put in there but shouldn't have in my next message following that, right?
You just want to copy and paste this:
echo 9274185136367780862791258724411398020885770P | dc
If you get an error message like bin: file not found, you may have a unix issue, then try this:
echo 9274185136367780862791258724411398020885770P | /usr/bin/dc
Similar Messages
-
E mail how to put photo into body of e-mail without recipient having to click downloadload
e mail how to put photo into body of e-mail without recipient having to click downloadload
What and how an email is seen on the other person's machine is dependent on their settings and not what you do. You can, for instance, send a HTML email, but if they haven't set their machine to deal with those, it won't work. It's all down to them.
-
.mac email: can't send photos, my password is refused mail sent to OUTBOX.
I start in iPhoto and choose 4 photos to send, then type a short message. I click send from my mac.com email and get a request for a password. I type in my password and get "password not valid" reply. the mail goes to "OUTBOX" and sits there. I have resent these from the outbox over and over again. I get and send text messages with .Mac just fine.
I am using a MacBook Pro 15 inch dual processor.
I called the u.s.a. Apple Protection phone # on 011907 and was told by Jeremy to reset my password, that didn't help. He then offered that he could not do anything and I should search the Apple sites. I asked if he would extend the Protection Plan for the time since Nov. 17, 2006 that this is happining. He said that's not his department.
CAN anyone help???
MacBook Pro Mac OS X (10.4.6) I have an Imac G4 tooHi msmyczek,
I have a .Mac account. When I choose to send photo's from iPhoto, they open in a draft in the Apple Mail program. Is this what you do? If your using the Mail program and .Mac, are you able to send any other mail? If not your settings are incorrect.
Open Mail. On the Toolbar choose Mail-Preferences, and click Accounts. Under Account Information:
Account Type: .Mac
Description: [email protected]
Email address: [email protected]
Full Name: Your name
Incoming Mail Server: mail.mac.com
User Name: msmyczek
Password: Your Password
Outgoing Mail Server
Click on the drop down box. Choose Add Server
In the Outgoing Mail Server, you need to put in what that is, and you should have this information from your internet provider. Mine for instance is smtp.west.cox.net. Leave Authentification blank. Leave the Password field blank. Click OK. Then close out of Accounts. It wil ask you to Save changes. -
How do i embed photo in body of yahoo mail with firefox? tom
if i copy a jpeg image from my documents and paste into the body of an email i want to send from yahoo mail it looks ok, but if i open that email in gmail, there is no image; just a long series of letters and numerals... what can i do to embed a photo in the body of a yahoo email that i want to send? thanks for any help....
tom hodge [email protected]@ Philly
Yes there is,
When you recieve a mail with an attachement (inline or as a picture) right click (or control click) the attachement and choose "show as symbol" or "show fullsize" (or completely or something like that, I don't work in English version). Mail will take this as a general preference.
Ben -
Hi any help out there, I have messed up e.mail should have had some training. I tried sending photo as attachment to e.mail but attached the whole application, of course this got thrown back, tried to delete it no luck . Now at a loss what to do mail box and mac now sooooo slow and cant seem to get rid of deleted mail??? comes up with error from imap server for gmail message to large ..has anybody else had this ?
If the message is still 'stuck' in your gmail account, you should be able to log into the web service and delete it. Don't know why it won't delete on the Mail side. Quitting Mail should delete the sent msg - don't know why it doesn't.
Give it a shot...
Clinton -
Mail refusing to send Photo booth vids
Hello - My mail account is set up with a Mac address and a yahoo address. When I attempt to send Photo Booth videos via my Mail account a pop up screen with
"Cannot send message using the server plus.smtp.mail.yahoo.com:[email protected] The server "plus.smtp.mail.yahoo.com" cannot be contacted on the default ports.
Select to a different outgoing mail server from the list below or click Try Later...
It used to send these vids fairly easily (slow but it did it). Now even though all connections are solid it is still refusing to send the vids. They are brief gif files so I'm not sure of all the options.
Has anyone else encountered this problem? Is there a quick fix? Thank you for your help.Well I'm having the same problem after also trying to send an email with photos as attachments.
The email keeps getting put into my draft mailbox "On My Mac". I've tried removing the attachments and then deleting the email,I've tried deleting the mailbox, I've been to the server and deleting the email I found there, but as you say, everytime, it comes back from the dead. I've gone to my mail preferences and changed the port and nothing seems to work. What is strange, is that everytime I click on the OK button on the error message, it starts again and puts another copy of the message into the draft mailbox, so I end up with multiple copies of the same email, complete with attachments.
I've tried turning airport off while I do this, and then turning it back on after deleting, but it hasn't helped.
I'm baffled as to what to try next. -
Payment advice notes by email (change in sender id) and body
Hi experts ,
I am trying to change the sender name and body of the mail that is send by mail.does this code work i called SO_NEW_DOCUMENT_ATT_SEND_API1 in Z_PAN_EMAIL_00002040.
look in the code and also tell me me does this work out. can some one tell me what is the 'SAPoffice' in this code. (ls_document_data-obj_name = 'SAPoffice'.) in fill document data part.
FUNCTION Z_PAN_EMAIL_00002040.
""Local interface:
*" IMPORTING
*" REFERENCE(I_REGUH) LIKE REGUH STRUCTURE REGUH
*" CHANGING
*" REFERENCE(C_FINAA) LIKE FINAA STRUCTURE FINAA
data: zadrnr like adr6-addrnumber,
zsmtp_addr like adr6-smtp_addr,
zremark like adrt-remark,
begin of zcon occurs 0,
zadrnr like adr6-addrnumber,
zconnumber like adr6-consnumber,
zsmtp_addr like adr6-smtp_addr,
end of zcon.
refresh zcon.
select single adrnr into zadrnr from lfa1 where
lifnr = i_reguh-lifnr.
if sy-subrc = 0.
select addrnumber consnumber smtp_addr into table zcon
from adr6 where addrnumber = zadrnr.
endif.
loop at zcon.
clear zremark.
select single REMARK INTO ZREMARK FROM ADRT
where addrnumber = zcon-zadrnr
and consnumber = zcon-zconnumber.
TRANSLATE zREMARK TO UPPER CASE.
if sy-subrc = 0 and zremark = 'REMIT'.
zsmtp_addr = zcon-zsmtp_addr.
exit.
endif.
endloop.
IF zsmtp_addr <> ' '.
search zsmtp_addr for 'britishcouncil' .
if sy-subrc <> 0.
code modified to check if sy-subrc = 0.
C_FINAA-NACHA = 'I'.
CODE MODIFIED AS PER SAP NOTE 1033893 .
C_FINAA-NAMEP = 'Testname'.
internet address of partner company clerk has been changed by pradeep akula as per requirements.
C_FINAA-INTAD = zsmtp_addr.
C_FINAA-FORNR = 'Z_F110_IN_AVIS2'.
this zzmail_sender_addrr and zzmail_body_text did not work in testing.
C_FINAA-ZZMAIL_BODY_TEXT = 'This is a test body text'.
C_FINAA-ZZMAIL_BODY_TEXT = 'Payment Advice Notes attached, please do not discard this message .All vendors should please add their company name'.
endif.
ENDIF.
code changes done by pradeep akula for Body of mail .
CLASS cl_abap_char_utilities DEFINITION LOAD.
TYPES: t_solisti1 TYPE TABLE OF solisti1,
t_sopcklsti1 TYPE TABLE OF sopcklsti1,
t_somlreci1 TYPE TABLE OF somlreci1.
DATA: lt_content TYPE t_solisti1,
lt_packing_list TYPE t_sopcklsti1,
lt_header TYPE t_solisti1,
ls_document_data TYPE sodocchgi1,
l_subject TYPE solisti1-line,
l_content_lines TYPE i,
lt_receiver TYPE t_somlreci1,
l_address TYPE adr6-smtp_addr,
l_new_object_id TYPE sofolenti1-object_id,
l_sent_to_all TYPE sy-binpt,
l_msg_text TYPE string,
l_rc TYPE sy-subrc,
l_user TYPE sy-uname.
DATA: l_crlf(2) TYPE c.
DATA: BEGIN OF crlf,
x(1) TYPE x VALUE '0D',
y(1) TYPE x VALUE '0A',
END OF crlf.
l_crlf = cl_abap_char_utilities=>cr_lf.
receiver address
DATA: ls_receiver TYPE somlreci1.
ls_receiver-receiver = zsmtp_addr.
receiver address type (internet address)
ls_receiver-rec_type = 'U'.
communication type (send via internet)
ls_receiver-com_type = 'INT'.
APPEND ls_receiver TO lt_receiver.
SAP name: used for the shortcut to the inbox (optional)
l_user = p_user.
l_user = ' '.
mail subject
l_subject = p_subj.
DATA: ls_content TYPE solisti1,
ls_header TYPE solisti1.
fill the document data.
READ TABLE lt_content INDEX l_content_lines INTO ls_content.
ls_document_data-doc_size =
( l_content_lines - 1 ) * 255 + STRLEN( ls_content ).
ls_document_data-obj_name = 'SAPoffice'.
ls_document_data-obj_descr = 'Test mail form payment advice its working'.
ls_document_data-obj_prio = 5.
ls_document_data-priority = 5.
fill data of mail
DATA: ls_packing_list TYPE sopcklsti1.
update the packing list.
ls_packing_list-transf_bin = ' '.
ls_packing_list-body_start = 1.
ls_packing_list-body_num = l_content_lines.
ls_packing_list-doc_type = 'RAW'.
APPEND ls_packing_list TO lt_packing_list.
ls_header-line = 'Test header - Vish'.
append ls_header to lt_header.
ls_content-line = 'Test mail form payment advice what you want to print here'.
append ls_content to lt_content.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = ls_document_data
commit_work = 'X'
IMPORTING
sent_to_all = l_sent_to_all
new_object_id = l_new_object_id
TABLES
packing_list = lt_packing_list
object_header = lt_header
contents_txt = lt_content
receivers = lt_receiver
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
keep error message
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
INTO l_msg_text.
ENDIF.
endfunction.Hi Pradeep,
you can change the sender, when you change the system-field SY-UNAME before calling FM SO_NEW_DOCUMENT_ATT_SEND_API1.
REPORT Z_TEST_SEND_MAIL.
h_uname must be a SAP-UserId.
sy-uname = h_uname.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = DOC_CHNG
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
TABLES
PACKING_LIST = OBJPACK
OBJECT_HEADER = OBJHEAD
CONTENTS_BIN = OBJBIN
CONTENTS_TXT = OBJTXT
RECEIVERS = RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
OPERATION_NO_AUTHORIZATION = 4
OTHERS = 99.
I tried it and it was successfull. -
I tried to send photos on aol through mac mail. The email did not sent, but I keep getting recovered messages despite rebooting. I don't know how to stop it.
An AOL account is normally set up as an IMAP account -- have you been using it in Mail? If not, open Mail Preferences/Accounts/Advanced and choose such that copies of messages and their attachments are not kept. I am suggesting this as you may be downloading previous messages upon connection.
Ernie -
Class CL_BCS Query for body part of mail
HI,
I want to send the mail with out attachement using Class CL_BCS. Can any body help me on how to send the message body in the mail using CL_BCS class....
Thanx & Regards,
SameerHi Sameer
I've been struggling with this class CL_BCS too for a while and I want to give my experience with that class. Following a code example which will submit a report to memory and send the report as an attachment by mail thru the SMTP interface.
*& Report ZOBR_SEND_TRIP_SIM_BY_MAIL *
*& This program does following:
*& 1. Submit a travel expense report to memory
*& 2. Read the travel expense report from memory
*& 3. Convert the travel expense report to HTML format
*& 4. Copy the travel expense report from format RAW(1000) to RAW(255)
*& 5. Send an email with body text and attachtments
REPORT zobr_send_trip_sim_by_mail .
DATA:
gi_abaplist TYPE TABLE OF abaplist,
gi_html TYPE w3htmltab,
gs_html LIKE LINE OF gi_html,
gw_string TYPE string,
gw_length TYPE i,
gw_length_c TYPE so_obj_len,
gi_solix TYPE solix_tab,
gs_solix LIKE LINE OF gi_solix,
gi_soli TYPE soli_tab,
gs_soli LIKE LINE OF gi_soli,
go_send_request TYPE REF TO cl_bcs,
go_document TYPE REF TO cl_document_bcs,
go_sender TYPE REF TO cl_sapuser_bcs,
go_recipient TYPE REF TO if_recipient_bcs,
go_exception TYPE REF TO cx_bcs.
* Submit report to memory
SUBMIT rprtef00 "USER sy-uname
EXPORTING LIST TO MEMORY AND RETURN
WITH pnppernr EQ '00001000'
WITH pnptimra EQ 'X'
WITH pnpxabkr EQ 'D2'
WITH pnppabrp EQ '11'
WITH pnppabrj EQ '2006'
WITH s_reisen EQ '0002600221'
WITH hinz_dru EQ space
WITH hinz_weg EQ space
WITH hinz_dyn EQ 'X'
WITH allesdru EQ 'X'
WITH reisepro EQ 'X'
WITH reisetxt EQ 'X'
WITH sw_antrg INCL 'X'
WITH addinfo EQ 'X'
WITH extperio EQ '000'
WITH simulate EQ space
WITH einkopf EQ space.
* Read report from memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = gi_abaplist
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Convert report to HTML format
CALL FUNCTION 'WWW_HTML_FROM_LISTOBJECT'
* EXPORTING
* REPORT_NAME =
* TEMPLATE_NAME = 'WEBREPORTING_REPORT'
TABLES
html = gi_html
listobject = gi_abaplist.
LOOP AT gi_html INTO gs_html.
CONCATENATE gw_string
gs_html
INTO gw_string.
ENDLOOP.
gw_length = STRLEN( gw_string ).
gw_length_c = gw_length.
* copy table from format raw(1000) to raw(255)
CALL FUNCTION 'TABLE_COMPRESS'
TABLES
in = gi_abaplist
out = gi_solix.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
TRY.
* Create persistent send request
go_send_request = cl_bcs=>create_persistent( ).
* Create document (body text in text format)
gs_soli = 'Trip is now settled, see attachment.'.
APPEND gs_soli TO gi_soli.
gs_soli = 'Reimbursement is paid out by your next salary.'.
APPEND gs_soli TO gi_soli.
go_document = cl_document_bcs=>create_document( i_type = 'RAW'
i_text = gi_soli
i_subject = 'Trip reimbursement' ).
* Add attachment (ABAP list format)
CALL METHOD go_document->add_attachment
EXPORTING
i_attachment_type = 'ALI'
i_attachment_subject = 'Expense report(ALI)'
i_att_content_hex = gi_solix.
* Add attachment (HTML format)
CALL METHOD go_document->add_attachment
EXPORTING
i_attachment_type = 'HTM'
i_attachment_subject = 'Expense report(HTM)'
i_att_content_text = gi_html.
* Add note (Text format)
CALL METHOD go_send_request->set_note( gi_soli ).
* Add document to send request
CALL METHOD go_send_request->set_document( go_document ).
* Get sender object
go_sender = cl_sapuser_bcs=>create( sy-uname ).
* Add sender
CALL METHOD go_send_request->set_sender
EXPORTING
i_sender = go_sender.
go_recipient = cl_cam_address_bcs=>create_internet_address( '[email protected]' ).
* Add recipient with its respective attributes to send request
CALL METHOD go_send_request->add_recipient
EXPORTING
i_recipient = go_recipient
i_express = ' '
i_copy = ' '
i_blind_copy = ' '
i_no_forward = ' '.
* set send immediately flag
go_send_request->set_send_immediately( 'X' ).
* Send document
CALL METHOD go_send_request->send( ).
COMMIT WORK.
* Exception handling
CATCH cx_bcs INTO go_exception.
EXIT.
ENDTRY.
Notice that the only way to put a body text in the email is to call the method cl_document_bcs=>create_document with input of a type 'RAW'.
Be aware of the settings of the SMTP node in SAPConnect (transaction SCOT) because the seetings could cource an unwanted conversion of the email.
1. Doubbelclick on the TMTP node and a popup screen will show.
2. Click on the 'Set' button next to 'Internet' under 'Supported address type' and a popup screen will show.
3. Set output format for SAP documents as 'SAPscript/Smart forms' = 'PDF', 'ABAP list' = 'PDF', 'RAW text' = 'TXT'.
This setting will convert 'SAPscript/Smartforms', 'ABAP list' to PDF format. If 'RAW text' = 'PDF' the body text wil be converted to 'PDF' format and change to an attachment and the body text will disappear.
Hope this is usefull for you and others.
Best regards
Ove Bryntesson
Applicon A/S -
How can I send photos in mail as attachments instead of in the body of the message?
I want to send photos as attachments to email instead of in the body of the message. I have searched through preferenced in both mail and iPhoto but can find nothing that lets me do this.
1. As Rysz says, Mail does send them as attachments. If seeing the preview is problematic for you, then right click on it in the Mail Message window and select 'Show as Icon'.
2. If you're worried about how they are received... Mail defaults to sending RTF email. A few older applications on other OSes have problems with these. A lot of users on other OSes can't figure out how to set their Mail applications to work with them. If that's the problem, use Plain Text as Larry says. -
Mail and iPhoto Problems with sending photos.
Mail and iPhoto Problems with sending photos.
I have this problem that started a while ago and seems to be getting worse.
Here are the different scenarios.
-If I try to share a photo to email within iPhoto, it will insert the image file name in the mail message, but no image icon or opened image. In iPhoto Preferences under General I have chosen to use Email Photos using Mail.
-If I choose to use iPhoto to send the photo, it will compose the message and the photo is viewable. If I send the message i can view the photo within the email I sent to myself. Nothing happens when I double click on the photo in the Mail message. Nothing happens when i control click on the photo in the mail message. Nothing happens when I try to drag the photo to the desktop from the mail message. When I try to save attachments from the email and choose a place to save it, the save button is grayed out and it cannot be saved. When I check the mail message it says there is an attachemnt but there is no file size listed.
-If I use the stationary within Mail app I cannot drag a photo into the placeholder, I get a circle with a line through it symbol when I try. It happens if I try to drag a photo from the desktop or from the media browser within Mail app.
-If I drag the photo to the desktop from iPhoto, I can double click it on the desktop and it will open in Preview.
-If I then control click on the same photo on the desktop and scroll to share/email, the generic photo icon will be inserted in the mail message. If i double click the photo icon in the mail message I get a message it can't be opened because it is empty.
-If I drag that same image to the mail message body the same thing happens.
-If I send that email to someone they cannot open the image file.
What I can do:
- I can drag that same image file on the desktop to my dropbox folder and it will upload. From there I can go on my iPad and download the photo and send it through email just fine.
-I can open the same image file on my desktop in Preview, I can copy and paste it into a mail message and the image will be viewable in the mail message by me and by the recipient.
-I can drag that same image on the desktop to my safari browser window and it will be viewable in the page. i can then copy and paste that image into a mail message and it is viewable in the message. I can then send that email message to myself and i can control click on the image and get all my options. It also shows as an attachment with the size of the image file in the mail message.
I can send that message to someone and they can see the photo and open it fine.
-If I send that same email to me I can see the photo within the mail. If I then drag that photo to the desktop I cannot use it again to put in an email as the same problem happens again.
I have tried all scenarios in my user account, another users account and in a guest account. The same happens in all. I am guessing because of this it is not a corrupt preference file, unless all of the preference files are corrupt. The guest user account I added a new email account so it was brand new and still had the problem.
I am stumped, all and any help is appreciated.Another problem that may be related….
I have Snapz Pro. I used to be able to save the snaps to my desktop or a folder. Now when I take a screenshot and try to save the file to my desktop or a folder on my desktop I get this message "Files cannot be created in the selected location. You do not have permission to write to the selected location. Please choose a different location." I have found that i can only save the file to the clipboard. I have repaired permissions many times and still I have this problem. -
Sending photo attachments from Mail to Gmail
I've been sending photo attachments via Mail for years and haven't had trouble until recently. Now I'm getting complaints from Gmail users that the attachments come through as embedded files. I guess on the Gmail end, they don't see it listed out as an attachment, but as part of the mail body. What's going on here?
I attach files same as I always have - by clicking on "attach", then selecting the file(s) I want to attach. I always leave "send windows friendly attachments" selected (although in an experiment, I tried sending it without clicking that, and the images came over all stretched out and shrunken in a very strange way).
I can't think of what would be happening, but I'm assuming it's something in either the way Mail or Gmail is treating the photos - and I'd like to have them come through as attachments, rather than embed files (I'm a photographer and have heard from some of my clients that the embed is a pain - they have to "save as" right click on each image rather than just select "save attachments" or something).
Any ideas??Send to these recipients using only Plain Text, and all should be well. To test choose a message you previously sent from the Sent mailbox, open, click on Message in the menubar, choose Send Again, then click on Format and choose Make Plain Text.
Rich Text as received by those using Outlook or Outlook Express, as two examples, will see the RTF as HTML, and the attachments will appear embedded -- although they are not.
Ernie -
HT1430 How do I send photos from my iPad Pad by e mail
How do I send a photo from my I Pad by e mail
You can also send photos directly from the mail app in iOS 6.
Tap and hold down on the body of the email and a black options bar will pop up with the option to Insert Photo or Video, tap on that and then select the photo or video from the window that pops up with all of your photos. -
Error message when sending photos as attachments in mail
When sending photos from i photo in mail I get an error message "Can't get paragraph 8 of content of outgoing message id 142504208. Invalid Index" I can send one photo at a time but no more than one. I have recently upgraded to leopard from panther. I tried rebooting but no success. Any suggestions greatly appreciated.
Bump. I have the same problem. Anyone shed some light on this?
-
HT201077 Why can't I send a photo via email from my Mail acct?
Suddenly I am unable to send photos via email. Have no idea why?
Ndeither do we unless you share some information
like what version of iPhoto and of the OS, hwat e-mail client are you using, what exact error message do you get, what else can you tell us that might help a total stranger help you
LN
Maybe you are looking for
-
Hp 2540 NAMING THE PRINTER SO IT SHOWS IN THE 8.1 ALL APPS LISTING
HP2540 8.1 START MENUE ALL APPS NO DISPLAY OF PRINTER NAME SHOWN. HOW TO GIVE IT A NAME?
-
Macbook dropped - how to troubleshoot display problem
My daughter dropped her macbook from about 3 feet. Since then, the lcd lights up uniformly but is just blank. The computer drives an external display and otherwise seems to function normally. How do you troubleshoot the source of the problem? LCD, in
-
Missing from 2004s: 0CUSTOMER, 0MATERIAL, ....
Hello, According to the SAP installation, the following is present in the ECC 6.0 (Netweaver 04s) system BUT - 0CUSTOMER, 0MATERIAL, etc. is missing in other words --- No content at all What is the problem? Pts awarded for a working answer. TIA SAP_B
-
Hi, How to find the total number of instances of a scheduled webi/deski report from the Audit Universe? If we count the total number of events with Scheduling Succeeded we may miss the report instances that have been deleted from the repository. So
-
Invalid Asset when updating an Article to iPad
Going through the learning curve of publishing to iPad and have successfully uploaded 2 basic articles to my iPad. For some reason I am now getting an [Error:Invalid Assest] when building folio. I have a Pan and Zoom on an image but other than that t