Sending Picture Too Small

Sometimes when I send a picture with my LG EnV Touch it is sent as really tiny, even though I don't have it set that way. Most of the time the pictures are normal sizes but every once and a while they are sent really small. Any idea why it does this and how I can fix it? I've tried sending it to various locations to see if it would make a difference but it doesn't.

If the picture exceeds the allowed text message size, (around 500 kb, including your text and recipient info), the photo will be auto-resized before sending. If most of your pictures do go through full size, but a few don't, your pictures may normally be very close to the allowed size, so it seems "random".
I use the next to the highest resolution setting and that seems to work for all pictures. My phone's highest setting is 1600x1200 (2 MP camera) and those get resized more often than not. The 1280x960 sends full size every time.
There also may be a setting for "fine" resolution or "normal" - try the normal rather than the fine.

Similar Messages

Pictures too small

When I send pictures the recipients say the pictures are very small, but when I send something from my gallery it says the picture is too big and must be resized down. How can I send them larger?

There is a file size limit in attachments. depending your device and their device will depends on how large it can be. But the max file size is 1.2 MB.

When I upgraded to ios6 I can no longer send pictures in a text message as I once was able too? this is for my iphone3GS This is a real inconveinance.

When I upgraded my daughters i-phone 3GS to the ios 6 , She was no longer able to send picture messages as a text . I have been on this phone for over 7 hours trrying to figure something. I see I'm not the only one with the problem so I dont feel too bad but this is a real inconveinance for me and my daughter . What is the solution to this?

I use a free SMS texting app called Pinger. You can even make calls with it.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

When I try to upload a picture to my profile page on facebook it says it is too small

when I try to uploiad a photo taken with my i-phone camera to my facebook profile page I recieve a message saying the photo is too small.

Hello, MaximusIV.
Thank you for visiting Apple Support Communities.
Here is an article I would recommend going through when experiencing these issue. See the sections that refer to Camera isn't functioning or has undesired image quality.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
If none of the steps help resolve the issue, see the last section labeled Issue not resolved.
Cheers,
Jason H.

Menus and Fonts too small with Panasonic HDTV

I just hooked up a new Mini (Intel chip) to my Panasonic HDTV-- 34" Model No. CT-34WX53-- using a DVI cable. The desktop shows up fine, but the menus and fonts are so tiny that I can't read them. When I try using Front Row, the pictures and vide are gorgeous and the fonts in Front Row are fine. It's just the fonts and menus in on the desktop and in other programs that are too small. Does anyone know how to fix?
Mini Core Duo Mac OS X (10.4.5)
Mini Core Duo Mac OS X (10.4.5)

Edward,
That's the price of having a gazillion pixels!
You have two options - send less pixels to the display or change each application (Including the finder) to show larger fonts and icons.
The lower the resolution option is easy and fast. The downside of "zoom"-ing the display is it may look blocky at certain resolutions and the fonts and fine details in photos and movies may be lost if the mac has to alias or scale the video. If you do this - you might want to enable the menu bar item for display preferences to quickly switch between the setting you prefer. I use one setting for actually using the mac and another setting for playing movies and showing slides in FrontRow.
The change the preferences to make the fonts and icons larger is more of a pain but yields the most crisp display and you don't have to change things up. I would start with Finder Preferences (select an icon on your desktop and on the View menu - show view options - crank up the icon size and font size.) Unfortunately - you have to do this in each application you use. It also won't change the menu font sizes - you might need an "extension" from a developer to change that.

MARS License: Print is too small!

Does anyone else find the size of the type used on the Mars license too small? I'm referring to the license tag on the front panel of the MARS box.
I'm using a magnifying glass on it and can't tell the difference between S and 5, G and 6, O and 0, Z and 2.
The box is basically a boat anchor until I go through every permutation.
Please tell me if I am missing something here?
Thanks in advance and all posts will be rated.

Thanks. They print it on the back of the CD.
Unfortunately, the print is the same size and is of even poorer clarity than the one on the MARS box.
I'll have to take a picture and send it to TAC just to get a license.
It's ironic that the MARS 100 I was working on yesterday had the license pre-loaded. This MARS 50 must have been sitting around the warehouse.

Thumbnails in "OPEN" dialog box too small to see!

The thumbnails are too small in the open dialog box so that I can't see the file I want to open. Yes, you can make them bigger in finder itself...but I am always opening pictures and I just can't see them!
Almost as frustrating as the column issue. The name column is very very wide when I try to open a file.. so I can't sort by the other columns without dragging over the bar at the bottom of the screen. THis is so so frustrating. I resize but it doesn't stick to the next session.
Apple invented the finder. Why is it so inferior to windows explorer?

The only solution to enlarging the icons in an application open dialog window is to use the Accessibility panel in System Preferences. Under Zoom, enable Use keyboard shortcuts to zoom.
The first time you have an application open dialog, you press the keys: option + command + = as many times as you want to zoom in. This will enlarge the open dialog window and its contents. When done, press option + command + 8 to restore normal window size. Subsequently, you can alternatively press option + command + 8 to zoom to the previous setting, or return to normal zoom.
This is as good as it is going to get. The applications (not just Apple’s) only use a subset of Finder’s settings in the open dialogs, and these do not include icon enlargement settings, which as you realize, are part of the actual Finder’s settings. The application development frameworks, and not Finder, are remiss in not providing icon size adjustments in open dialog windows.
You can provide feedback to Apple regarding OS X.

Photoshop CC: Have a template that I moved image into. Image is too small. How do I resize the image while in the template? Or must I go to original image file and resize there again and again until I get the right fit?

I have a template that I am able to plug different pictures into at different times. The problem is that when I plug an image into that template, I find that the image is either too big or too small. Is there a way to plug the image into the template and resize the image (and not the template itself) OR will I have to go to the file with the original image and resize it there and then try to plug it in to the template to see if it fits------and if it does not fit, go back to the original file with the image and resize it again and see if that fits---and so on and so on...........? I have tried the" image size" option but it's hit or miss------mostly miss!
Thanks!

Read up on Smart Objects. It looks like you have no idea as to how to create and use them.
Jut create a Smart Object from the layer containing whatever it image it is that you are "plugging into your template". But you do need to learn the application at its most basic levels.
Photoshop is a professional level application that makes no apologies for its very long and steep learning curve. You cannot learn Photoshop in a forum, one question at a time.
Or is it possible that you don't even have Photoshop proper but the stripped-down Photoshop Elements?"
If the latter is the case, you're in the wrong forum. This is not the Elements forum.
Here's the link to the forum you would want if you're working in Elements.:
https://forums.adobe.com/community/photoshop_elements/content
If you do have Photoshop proper, please provide the exact version number of that application and of your OS.
(edited for clarification)

How can I sort my photos by size? I need to get rid of those which are too small to print.

Is there a way to sort individual photos in iphoto by size. (I know you can sort photos in finder- picture by size, but mine are in iphoto). I am organizing my thousands of photos into files within iphoto in order to print hundreds. I am finding that many are too small to ever print (20-30kb) , and would like to delete those en masse rather than waste time sorting them, but cannot find a way to do that. Does anyone know if there is a way? It would be a terribly useful function. Also, sorting by size would enable you to resize photos that take massage amounts of room unneccesarily. Thanks for any info.

No there is no way to do this.
Also, sorting by size would enable you to resize photos that take massage amounts of room unneccesarily.
No it wouldn't. There's no way to change the filesize in iPhoto, it always preserves the original file.

Data area for accessing table is too small., error key: RFC_ERROR_SYSTEM_FA

Hi all,
I build a java applicatio to call a sap function.
This FM have only an import parameter as structure, the last field of this structure is 16000 characters long.
When I start the application if the long field is empty all works fine, but if I fill it the java compiler send me this runtime error:
[code]
Exception in thread "main" com.sap.aii.proxy.framework.core.BaseProxyException:
Data area for accessing table is too small.,
error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
     at bi9032.BI_9032_PortType.zhr_Bi_9032(BI_9032_PortType.java:16)
     at bi9032.Startapp.main(Startapp.java:50)
[/code]
Any one can me explain the problem?
It's possible that I can't pass a large data quantity?
thanks and regards,
enzo
Message was edited by: Enzo Porcasi

I understood that it's a sap problem,
so I will write in the abap forum,
bye
enzo

Buffer too small for string - Crystal Report for Vs2010

Hello,
    I have recently upgrade my VS2010 project to Crystal Report for Visual Studion 2010.
    I have some reports that contains more than 512 characters in the Report Comments section.
    When I try to do a RptDoc.SaveAs(vPath, false) the following error is raised:
Buffer too small for string or missing null byte.
      at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.SaveAs in :line 0
      at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.SaveAs in :line 0
      at CrystalDecisions.CrystalReports.Engine.ReportDocument.SaveAs in :line 0
    This line SaveAs was working has expected with Crystal Report 2008. Any idea on why it is not working anymore.
Thank you.
Charles

Hello Don,
    I have start a little project to retest the behavior.
   I have create a new report in Crystal Report 2008 just by clicking New, Finish and Save.
   In a new Windows Application in Vs2010 ,I have added the following Crystal Report Reference.
    CrystalDecisions.CrystalReports.Engine, Version=13.0.2000.0
   CrystalDecisions.Shared, Version=13.0.2000.0
I have then try the following code and found out the limit of ReportComment is 511 but in the Crystal Report 2008 designer and runtime the limit did not apply.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
      Dim objRpt As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
      Dim i As Integer = 0
      Try
         objRpt.Load("c:\temp\empty.rpt", CrystalDecisions.Shared.OpenReportMethod.OpenReportByTempCopy)
         Do
            i += 1
            objRpt.SummaryInfo.ReportComments = New String("X", i)
         Loop
         objRpt.SaveAs("c:\temp\dfh_save.rpt", False)
      Catch ex As Exception
         MsgBox("i: " & i)
         MsgBox(ex.Message)
      End Try
End Sub
     I am able to put has many characters if I insert the report in the Vs2010 Solution.
     If you prefer I can send you my little project.
Thank you.
Charles
<code> should be
Edited by: Don Williams on Feb 4, 2011 12:47 PM

Hello MacBook Pro Musicians- I cannot read sheet music from the ipad. It is too small. I want to connect a large monitor, hopefully wirelessly to my 13 inch macbook pro. what would I need to connect ? Any suggestions on how to keep monitor from falling?

Hello Macbook Pro Musicians--I cannot read sheet music from my 13" macbook or from an IPad. The print is too small for these aging eyes! So I need to get a large monitor to attach to the Macbook. I want the monitor to be connected wirelessly or using a blue tooth. This will eliminate alot of potential mishaps
when playing out. Also I am having a time figuring out how I am going to safely keep the monitor on somekind of music stand without falling!!! Can anyone help me with this?

Hi Julius,
As you can see in my profile section, my MBP is older by 5 years, 2GB RAM and with regards to question 1 (Q1), has no problems with having all those programs open at the same time with the possible exception of Photoshop since I use Gimp instead. With twice the RAM and much overall much better specs, Photoshop shouldn't be an issue. But you listed some other activities that might need that additional RAM. But the advise most give is to not get it from Apple but from a third party.
Q5 - I always get Apple Care. Only had to use it once but it paid for itself that one time.
Sorry, can't help you much with the questions you really want answered since I won't have a new MBP until (hopefully) next week but for Q4, I believe it depends on the peripheral. My current monitors are too old to allow them to be hooked up in a chain. Supposedly, if the monitors do have the ports, you could via the MBP Thunderbolt port. The speeds are also dependent upon the peripheral. If the external hard drive is using a USB 2 port, you are limited by that speed (480 Mb/s). If it has a Thunderbolt port, then from what I understand, we, my friend, are in for some great times because I believe your RAM will have the ability to access data as fast as it can take it at 10Gb/s (and if will need those kinds of speeds, the 8GB of RAM may be the way to go). The Thunderbolt demos on YouTube where they are accessing four video files from a Raid drive, then sending them back out via Final Cut Pro to a monitor are amazing. I'll probably never push this machine to anywhere near it's limits but I can't wait to see what others do.
Peace,
Jeremiah

Images too small to edit

Something just happened here. In the past, when I open any photo in Elements 10, the image would pretty much fill the space. the bottom edge of the picture would almost reach the bottom of the workspace...whether vertical or horizontal format. Then I would create a duplicate and hit either ctrl + 0 (zero) and the duplicate would be a nice large size. ( Double clicking on the little hand in the tool bar would also do the same trick).
Now , for some reason, the picture opens to maybe 60% of that size. It's way too small to work on comfortably. The duplicate is even smaller. When I hit the ctrl + 0 ...nothing happens size remains the same. If I pull on lower right hand corner to enlarge...it only enlarges the ruler and frame. Picture itself remains same small size. How can I get that back? I tried a system restore. that did not work. Thank you.

Hi Barbara,
Thank you for your response.
I don't use the Organizer. Never have. I have my own system which I've been using for over 10 years and thousands of pictures...first with Photoshop 6; later with PSE 7 on earlier computers and now with PSE 10 since June 2012. Its always been fine beforehand. And I have only had problems with 10 on this. Its happened before but I think last time it was under warranty and on screen dialog Support Team helped me get it back.
This is how I work.....
Whenever I save my photographs, I create a (new) file on the desktop. then I will download all the images from that project from the SD card into the file ( example...Quebec...or Dilapidated Houses; or Antique Car Show 5/2013; etc etc.) OK then when I want to edit a picture.... I open that particular one in PSE. Then I immediately make a duplicate. OK Here is where the problem now occurs. Prior to today, after I have the duplicate on the screen.....I would just hit ctrl + 0 (zero) and the picture enlarged to a nice size. Very easy to see and work with. (One can also double click on the little hand in the tool bar for the same effect). But something happened here and when I now do that...the image does NOT enlarge. It actually creates a smaller duplicate. Which makes it VERY hard to edit when its so small.
Please refer to the page attached to this email file. These should help to show what my problem is here.
How do I get back the function where ctrl + 0 (zero) or double clicking on the toolbar hand gives me a nice full image?
Thank you.
Art Herman

E55 Incoming MMS Images Too Small

I have a E55 bought as sim free but on O2 - a brilliant phone. All my incoming MMS message images are very small thumbnail size, too small to be of use. It's not a settings issue with the sender. I have researched this problem all over the internet and it's not clear if it's a phone set up problem (I've checked out all settings which seem ok) or if O2 network cannot recognise the phone (they don't sell it) so send images small as their default. I've had this problem previously on other sim free phones on O2.
Surely there must be a solution as it appears to be very common? O2 customer support cannot help, as you might expect. Anyone any idea?
On a separate note, is there any good S60 software around to tweak the phone under the surface, like there is for windows mobile phones? Is it possible to edit system configuration files and, if so, how and where are they?
Thanks

have you checked your mms settings and looked at image size
go to menu/messages /options/settings/multimedia/image size
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

File printing and icons for folders in Bridge CS5 - too small to read

Got CS5 and am trying to use Bridge. The folders are too small to read and the print with them too small. The slider at the bottom of the page enlarges the space but the files and printing stay the same size. If I open one the images will enlarge with the slider but I don't want to waste time opening each file to see what is in them. I want to be able to read wha the file is and open the right one first try.
Tried calling "tech support" Those jackasses can't speak English. On hold for 3 hours overall after getting someone, getting cut off and having to call again. I hope Pakistan nukes India and solves that problem.
When I finally got through the guy told me my Photoshop copy was not registered. Funny, it was last week when it had problems. Then I try changing the pasword and it says it did it, but won't accept it.
I hate computers.
So, anyone know how to get this damn probram to make the folders and printing big enough to read without my having to get up to the screen with a magnifying glass like Sherlock Holmes? The screen is a 22inch graphic arts monitor and I don't have this problem with any other programs. Not Breezebrowser, Not Auto Pano Pro, not Photo Mechanic. Just Bridge with this overpriced and overhyped photoshiz crap.

Small, and uncustomizable, fonts has been a com
plaint in PhotoShop also.
Send in a bug report, they do read those, and maybe if enough users complain they will modify the program.

Sending Picture Too Small

Similar Messages

Maybe you are looking for