Sending quiz data to LMS

Hi
In CP4 is there a way to send the quiz results at the end of the project? What i am runing into is, I have three slides that run after the quiz has been completed but it seams while the quiz is sending the data to the lms the project keeps going and so messes up the voice over and slides timing, at one point I have two slides voice over at the same time.
Mike

After trying a couple of times I am still having one of those days.
Even with Rod's suggestion of the new scorm template from Adobe, I am still finding that after the quiz results page the next two slides voice over is merging into one and they are not following the time line.. I think it is due to the data being transferred to the lms..
So to give you an idea of what I mean, I get something like this:
After completing the quiz - 20 questions we show the results page.
Then click next to continue from the results page.
Next slide starts but voice over only starts after a delay of up to 20-30 seconds then it starts. The total timeline for this slide is 38 seconds.
After time line for this slide reches 38 seconds we go to the next slide and voice over starts for that one.
Now I have two voice overs going at the same time until they both end as the second slide has an exit button on it and is paused until they click it.
Any ideas?
Mike

Similar Messages

Sending Quiz Results to LMS

I've created a quiz. Now how do I set it up to send the
results to an LMS? And in what format are the results sent? Is it
an xml file that will have to be parsed.

Hi there
Normally you click Quiz > Quiz Settings (might be Quiz
Preferences) and look at the Reporting node. You enable it and
configure the options for your specific LMS. Each LMS is likely to
be different and will require different settings here.
To my knowledge it is not a XML file that is used. I believe
most of it is done with JavaScript.
Cheers... Rick

Captivate 4: Never Send Resume Data feature

I'm new to Captivate 4 and LMS. Want to make sure I understand the use of the LMS Customization Setting - Never Send Resume Data. Should that be deselected or selected in order for the user to be able to "bookmark" or return to the page where they left off? Thank you!!!

Hello,
This depends on the LMS, I think, anyway ours offers this opportunity.
Lilybiri

How to configure and retrieve quiz data from Captivate 7 to other server?

Hi,
I'm trying out Adobe Captivate 7 and would like to know if there's anyway for me to retrieve quiz data and display it maybe in one my company's system, such as Microsoft CRM or Sharepoint? Is there any additional settings or integration for this? So far, I've tested it to display in Acrobat by login to my own account. How if I want it to store in CRM or Sharepoint? If there's any video or guides showing on this method, it would be perfect.
Thanks.

Hi There,
Welcome To Adobe Forum.
In case of adobe captivate you can reporting data not only to acrobat server but also to an internal server e.g. WAMP server.
Please use the below link for the video tutorial for the same:
http://tv.adobe.com/watch/publish-and-track-results/reporting-using-lms-or-internal-server /
Thanks and Regards
Loveesh

Sending first result to LMS

Hi,
I'm looking for the correct quiz settings so that when allowed to retake a quiz, the first results/scores
are not passed to the LMS, but the final scores are passed.
Also, I need to know what to set so that if a quiz is failed, how to get the "complete" status to pass
to LMS. My LMS (Rollbook) is looking for "mastery score" and score, so I want the failed result
to cause Cp to set status to complete. Or can I not do that at all? will failed always mean incomplete?
Thanks in advance,
Denise

Further info: These are the course scenarios and results that I need to see.
1. course is presentation type method of content, without a quiz. Need LMS to display "completed/passed: without a score displayed
2. course is presentation type method of content with a quiz. 1 - 10 questions, user is required to take quiz and pass to consider course complete
- allowed 3 attempts to take and retake quiz, either first or subsequent sessions
- if first is failure, and user exits course window in LMS, need to display incomplete/in progress
- if final attempt is failure, and user exits course window in LMS, need to display complete and failed.
- if final attempt is passed, and user exits course window in LMS, need to display complete and passed
i.e., need to send complete status on final attempt, and actual result (pass/fail). And not send "max score"
3. course is presentation type method, with interaction in the Cp screens, with a quiz:
- allowed 3 attempts to take/retake quiz BUT want the retake to be the whole course, not just the quiz, so
would like the "continue" button on the results page to return to course start (so far continue only works
on attempt 1 and I've posted a separate problem on the continue button).
Need this course to work as described in #2 above.
Tried the course described in #3 today, and passed the quiz on first attempt, results displayed correctly,
but LMS displayed "incomplete". Achieving passed does not set status to complete, regardless the
number of tries on the quiz.
Thanks in advance for the help!!
Denise

Unable to send the data entered in sap portal

Hi
All
i am trying to configure and test Leave Request from portal. When, we create the leave request and submit for the first time, it is giving the error/message Unable to send the data entered However, if do a submit for the second time, the same leave request, it sends the leave request.
Please share your valuable thoughts or solutions.Thanks in advance.
Tanks
Rafi Shaik

Hi Rafi,
We are also facing similar kind of issue.
When i select type of leave as annual it is giving an error message as
" Parameter missing in call of method BUILD_ACTOR_SELECT_CLAUSE in class CA_PT_REQ_ACTOR "
But when i select some other leave type and click review it is working fine, again if i click on previous step and change the leave type to annual it is working fine without giving any error message.
Please let us know how you have solved your issue?
Thanks.
-Suresh

Problem restoring LMS 2.6 data to LMS 4.0

Hello,
I'm trying to migrate from LMS 2.6 on a Windows 2003 server to LMS 4.0 on Windows 2008 R2.
Two things I'll note here which might help future people attempting to use the LMS 4.0 backup/restore scripts as detailed in the migration document:
1) Make sure nobody has installed cygwin on the server before you run the backup scripts. If they have, remove it and the reg keys.
2) On the target server make sure to run the restore script CMD session using runas or disable UAC on Windows 2008 or the restore scripts will fail
My next problem I can't get past. I've been running the restore since yesterday morning and it still hasn't finished. It hasn't moved from 40% complete migrating the IPM data but in the last 24 hours it has eaten up 6Gb more RAM.
C:\Users\zadmkovesa>e:\sw\CSCOpx\bin\perl.exe e:\Sw\CSCOpx\bin\restorebackup.pl
-d e:\lmsbackup\ -t e:\lmsbackup\temp
Restore started at : 2011/03/15 11:21:12
Please see 'E:\Sw\CSCOpx\log\restorebackup.log' for status.
     USER ID is ..................................... : zadmkovesa
     OS of the backup archive is..................... : Windows
     WARNING: The temp directory e:\lmsbackup\temp\tempBackupData is not empty.
              An earlier instance of restore operation might have been interrupt
ed before completion.
              If you proceed with the restore operation, this directory and its
sub directories will be deleted.
              Do you want to continue? (y-continue or n-quit, y/n)?y
     Generation to be restored is ................... : 0
     Backup taken from............................... : e:\lmsbackup\
     Common Services version in the backup data is... : 3.0.6
     Common Services is installed in................. : E:\Sw\CSCOpx
     The temp folder for this restore program........ : e:\lmsbackup\temp\tempBa
ckupData
     Applications installed on this machine ......... : [Common Services][Campus
Manager][Resource Manager Essentials][Device Fault Manager][cvw][cwlms][cwporta
l][ipm][upm]
     Applications in the backup archive ............. : [Common Services][Campus
Manager][Resource Manager Essentials][Device Fault Manager][cvw][ipm]
     WARNING: The list of applications installed on this CiscoWorks server does
not match the list of
              applications in the backup archive. If you restore data from this
backup archive,it may
              cause problems in the CiscoWorks applications.
              Do you want to continue the restore operation? (y-continue or n-q
uit, y/n)?y
     Applications to be restored are................. : [Common Services] [Campu
s Manager] [Resource Manager Essentials] [Device Fault Manager] [cvw] [ipm]
     Available disk space in NMSROOT................. : 237023900 Kb
     Required disk space in NMSROOT.................. : 38857544 Kb
     (The temp and NMSROOT are on same device, therefore this required disk spac
e includes temp space)
Copying the backup files to the temporary location [e:\lmsbackup\temp\tempBack
upData]
preRestore of [Common Services] has started.
preRestore of [Common Services] has completed.
preRestore of [Campus Manager] has started.
preRestore of [Campus Manager] has completed.
preRestore of [Resource Manager Essentials] has started.
preRestore of [Resource Manager Essentials] has completed.
preRestore of [Device Fault Manager] has started.
preRestore of [Device Fault Manager] has completed.
preRestore of [cvw] has started.
preRestore of [cvw] has completed.
preRestore of [ipm] has started.
Not all data from IPM 2.6 will be migrated to LMS 4.0. For information on the d
ata that is migrated, see the "Migrating Data From LMS 2.6 or 2.6 SP1" section i
n the "Migrating Data to CiscoWorks LAN Management Solution 4.0" chapter in the
LMS4.0 Installation Guide for details. Do you want to continue[Y/N]:[Y]y
Do you want the IPM 2.6 collectors present in the backup to be DELETED from the
source routers [Y/N]:[Y]n
preRestore of [ipm] has completed.
doRestore of [Common Services] has started.
          License check started.
             WARNING: The license details in the server are different from the b
ackup data.
                      After restoring, please check the license available in the
server.
             WARNING: Your current license count is lower than your earlier lice
nse count.
                      If you restore the data now, devices that exceed the curre
nt licence count
                      will be moved to Suspended state.
          License check completed.
          Restoring certificate.
             WARNING: Cannot evaluate the hostname, hence the certificate
                      may be from this host or another host.
                      [ Certificate not overwritten ]
          Restored Certificate.
          Restoring Common Services database.
          Restored Common Services database.
          Restoring CMIC data.
          Restored CMIC data.
          Restoring CMC data.
          Restored CMC data.
          Restoring Security Settings.
                INFO:
                Backup Mode is ACS. In LMS we are not supporing ACS for AAA.
                Setting Login Mode to CiscoWorks Local.
          Restored Security Settings.
          Restoring DCR data.
          Restored DCR data.
          Restoring Certificate key store.
          Restored Certificate key store.
          Restoring JAAS configuration.
          Restored JAAS configuration.
          JRM Job Migration started.
          JRM job Migration done.
doRestore of [Common Services] has completed.
doRestore of [Campus Manager] has started.
doRestore of [Campus Manager] has completed.
doRestore of [Resource Manager Essentials] has started.
10% of RME Restore completed
30% of RME Restore completed
50% of RME Restore completed
70% of RME Restore completed
100% of RME Restore completed
doRestore of [Resource Manager Essentials] has completed.
doRestore of [Device Fault Manager] has started.
10% of DFM Restore completed
30% of DFM Restore completed
50% of DFM Restore completed
80% of DFM Restore completed
Going to modify Eight PM report
Modified Sucessfully Eight PM report
100% of DFM Restore completed
doRestore of [Device Fault Manager] has completed.
doRestore of [cvw] has started.
doRestore of [cvw] has completed.
doRestore of [ipm] has started.
10% of IPM migration completed
20% of IPM migration completed
30% of IPM migration completed
40% of IPM migration completed
>>>
The restore log is more than 8Mb in size so I won't upload it unless someone really wants to see it. Here is a snip from the end of it showing no clues I can make sense of:
INFO: Getting message
INFO: Connect the database dsn=ipmdb
INFO: Connected the Database
INFO: Command Executed
INFO: Connecting the Database ipmdb
INFO: Company=Cisco Systems;Application=NMTG;Signature=010fa55157edb8e14d818eb4fe3db41447146f1571g32125eb777a87cbf8b29a954f559d4221b792ff8
INFO: Preparing AUTH cmd
INFO: AUTH Executed
INFO: AUTH cmd finished
INFO: Stopping the Database engine ipmdb
INFO: E:\Sw\CSCOpx/objects/db/conf/ConfigureDB.LOCK released for the future operations...
INFO: File not exists.[Tue Mar 15 13:17:30 2011] Successfully registered the database with DM
[Tue Mar 15 13:17:30 2011] Successfully configured IPMDB database !..
10% of IPM migration completed
INFO: Start changing password for database 'ipm'...
    Starting database engine ipmEng
INFO: New userinfo updated into database successfully.
    Stopping database engine ipmEng
SQL Anywhere Command File Hiding Utility Version 10.0.1.4051
INFO: Password changed in odbc template file for database 'ipm'.
INFO: Password changed for ODBC registry 'ipm'.
INFO: Password changed for Property file E:\Sw\CSCOpx\lib\classpath\com\cisco\nm\cmf\dbservice2\DBServer.properties.
INFO: Database password successfully changed.
INFO: Process created
INFO: Started the Database engine : ipmEng Retry 0
INFO: Started the Database engine : ipmEng Retry 1
INFO: Started the Database engine : ipmEng Retry 2
INFO: Started the Database engine : ipmEng Retry 3
INFO: Started the Database engine : ipmEng Retry 4
INFO: Getting message
INFO: Connect the database DSN=ipm
INFO: Connected the Database
INFO: Command Executed
INFO: File not exists.[Tue Mar 15 13:18:08 2011] Updated IPM 2.6 DB password into IPM 5.0 DB
20% of IPM migration completed
The CiscoWorks Daemon Manager service is starting.
The CiscoWorks Daemon Manager service was started successfully.
[Tue Mar 15 13:18:12 2011] Waiting for all daemons to start completely...
[Tue Mar 15 13:20:12 2011] Successfully stated daemon manager
30% of IPM migration completed
[Tue Mar 15 13:20:12 2011] Checking if IPM Process is up and running
INFO:Daemon Manager is processing other tasks in the queue.Please try again later.
[Tue Mar 15 13:25:12 2011] Process IPMProcess is not running or never started
[Tue Mar 15 13:25:12 2011] Will check after 60 seconds
INFO:Daemon Manager is processing other tasks in the queue.Please try again later.
[Tue Mar 15 13:31:12 2011] Process IPMProcess is not running or never started
[Tue Mar 15 13:31:12 2011] Will check after 60 seconds
[Tue Mar 15 13:34:54 2011] Process IPMProcess is running normally
[Tue Mar 15 13:34:54 2011] Let's proceed further..
40% of IPM migration completed
[Tue Mar 15 13:39:54 2011] delete flag is 0
[Tue Mar 15 13:39:54 2011] Data passed to MigrMain : 2.6 5.0 E:\Sw\CSCOpx E:\Sw\CSCOpx e:\lmsbackup\temp\tempBackupData Migration e:\lmsbackup\temp\tempBackupData 0
Should I just wait? Is this something that might take days if I've got a lot of IPM data or is it broken? I don't really care about keeping IPM data so could I do something to complete the data migration for everything else? Any advice appreciated.
regards,
Aaron

The restore can take a long time if you have a lot of data. The problem is the database needs to be completely unloaded and reloaded to convert from ASA 9 to ASA 10. However, if you do not care about IPM data, and you still have LMS 2.6 running, you can take a new LMS backup not using the wrapper.pl script (this will keep IPM from being backed up).

How to send Array data using Post Method?

Var array = $_POST['myData'];
array[0] => 'ABC'
array[1] => 'DEF'
how to improve this code to support send array data...?
String url ="http://xxxxx/test.php";
String[] arraystr={"ABC", "DEF", "EDFF"}
String parameter = "myData=" +arraystr;    // no support this
Strint str = postMrthod(url, parameter );
public static String postMethod(String url, String parameter) {
        StringBuffer b = new StringBuffer("");
        HttpConnection hc = null;
        InputStream in = null;
        OutputStream out = null;
        try {
            hc = (HttpConnection) Connector.open(url);
            hc.setRequestMethod(HttpConnection.POST);
            hc.setRequestProperty("CONTENT-TYPE", "application/x-www-form-urlencoded");
            hc.setRequestProperty("User-Agent", "Profile/MIDP-2.0 Configuration/CLDC-1.0");
            out = hc.openOutputStream();
            byte postmsg[] = parameter.getBytes();
            for (int i = 0; i < postmsg.length; i++) {
                out.write(postmsg);
out.flush();
in = hc.openInputStream();
int ch;
while ((ch = in.read()) != -1) {
b.append((char) ch);
} catch (IOException e) {
e.printStackTrace();
try {
if (in != null) {
in.close();
if (hc != null) {
hc.close();
} catch (IOException e) {
e.printStackTrace();
return b.toString().trim();

yes, you can send integer value like this. But I think you have to put quotes around <%= TAMID%> i.e.
<input type="hidden" id="HTTP_CVHTAMID"
name="HTTP_CVHTAMID" value= "<%= TAMID%>" >

Can I just send the data to NIC's buffer in LV? (how to access data link layer?)

Now, I need to send something over network, yet those are not packed in TCP/IP or IPX packet, them are just some data a device can understand.
So the problem I met is seems I cann't send the data into NIC's buffer(I can do that in C, yet I want to use LabVIEW to do that)
And I don't want to do that by using a CIN, every time the program call or exit the CIN,there will be a delay, it's would bring me a bad impace to my application.
So is there anyone can help me with that? I really need some master can give me a comfirm!

I'm not an expert on network communication, so maybe you can explain how data can travel on an IP based network without being wrapped in some packets from a protocol like TCP or UDP? Maybe it's possible for LabVIEW to do what you want, or maybe compiling your C code into a DLL (no need for a CIN) and calling that will be fast enough for what you want.
In any case, I think I can answer one question:
So, how long would we have to expect LV add/improve these functions? Could it be in next minor update?
Not likely, nor is it likely to be in any other version soon. LabVIEW is not built to handle this sort of thing any more than PHP or perl are and I don't think NI will change it to be able to do so. For that you have C, which you can call through a DLL. Some DLLs are supported on RT targets as well, but I'm not sure what the criteria are. They are probably listed somewhere on this site.
I assume that calling a DLL in an RT target will hurt your determinism, but communication code should not be time-critical code, unless your application is an application which requires high speed data transfers and synchronization between different nodes.
Try to take over the world!

Error while sending the data using input schedule

Dear Friends,
I am unable to send the data using input schedule due to following error is occur while sending the data.
The Error Message : Member (H1) of dimension (ENTITY) is not a base member (parent or formula)
Can anyone please help me to resolve the above error.
Thanks and regards,
MD.

Hi,
You are trying to send data to a parent/node, you can only send data in BPC to lowest-level children (base mamabers) of any dimension.
"H1" is a parent in the entity dimension so you should try sending to a child.
Tom.

'unable to send print data' on HP Laserjet 1536dnf MFP

Hi there,
I'm running an iMac with OSX 10.6.8. Via an USB cable I have attached a HP Laserjet 1536dnf MFP to the iMac.
I also use this printer to print via wifi (i.e. through the iMac) with my MacBook Pro (with OSX 10.7.3).
Suddenly today the printer stopped working via my MacBook Pro. I get an error message: 'unable to send print data'.
I have checked my antivirus etc., but that does not appear to be the problem. I have also updated the firmware of the printer, without success.
Can somebody help me out? Is the OS difference the problem? But until today that hasn't been a problem.
Thank you very much! Regards, Luc.

Hi jemenake
I understand you lost connection with the network for the Laserjet 1536 through ethernet connection.
Disconnect the routers power cable, wait 10 seconds, then reconnect the power cable. Wait till it's ready. The router might not be finding the printer on the network.
If this doesn't resolve the issue continue to the next steps.
Print a configuration report from the LaserJet 1536dnf.
Press the Setup button, (the one with the wrench on it)
reports, press OK, Config Report, press OK.
Check to see if the ip address is valid.
If you have a valid ip address then delete and add the printer on the mac, the driver might have become corrupted.
Delete printer on mac.
Click on the Apple, click System & Preferences,then click the Print & Scan icon (on some systems this may be displayed as Print & Fax),highlight your printer name and click the button on the bottom left corner of the screen.
Add printer on the mac.
Click on the Apple, click System & Preferences, and then click the Print & Scan icon (on some systems this may be displayed as Print & Fax),click add a printer, then select the printer from the list, make sure the printer listed beside use or print: shows proper printer name and not airprint, (airprint is a preinstalled apple driver with basic funtionality if on 10.8) add it in.
If the ip address is not valid please let me know.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to send the data from mac pc to External drive

how to send the data from mac pc to External HDD
or Pen Drive but with out deleting the preview as data

You can use "Finder", which is in your dock, to copy files from your iMac folders over to the external hard drive.
Hope this helps

How to send multiple data for a single element

Hi All,
I have a requirement where I have to send multiple data for single element per single transaction. For example
Id details
1 abcd
1 efgh
1 def
Now, when I am selecting this ID from database, I have to get all the details in a single xsd like
<id>1</id>
---><details>abcd</details>
<details>efgh</details>
<details>def</details>
Thanks

Hi,
The following XSLT...
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:template match="/">
<xsl:variable name="root" select="/"/>
<root>
<xsl:for-each select="distinct-values(/root/entry/id)">
<xsl:variable name="id" select="."/>
<entry>
<id><xsl:value-of select="$id"/></id>
<xsl:for-each select="$root/root/entry[id = $id]">
<details><xsl:value-of select="details"/></details>
</xsl:for-each>
</entry>
</xsl:for-each>
</root>
</xsl:template>
</xsl:stylesheet>Will work for a document like this...
<root>
<entry>
<id>1</id>
<details>detail1</details>
</entry>
<entry>
<id>1</id>
<details>detail2</details>
</entry>
<entry>
<id>2</id>
<details>detail3</details>
</entry>
</root>Hope this helps...
Cheers,
Vlad

How to send joystick data over TCP connection

Hi all,
I am a long time Labview discussion forum user for learning, but this is my first time posting a question, I hope somebody can help me!
In the attached VI I am trying to send data from a joystick over a TCP connection. I can send data fine using the TCP examples (in fact the majority of my VI is just a copy of the example). However I am to the point where I do not know how to send all the data necessary (3 axis data, 12 buttons, and the POV data) over TCP. Strings, clusters, and arrays were never my strong suite and converting between them is a nightmare for me.
Basically I am trying to send each axis data (X,Y, and Z), button data (12 buttons), and POV data (the POV data will be calculated to adjust the position of a camera, so the immediate data is not important, I will add functions to add the change in the button movements to write a standing position for two servos [pan and tilt], for which that I will need to send over the TCP connection) over the TCP connection to control various cameras and motors. I don't know if it is posible to send that much data over a TCP connection in one write VI through a string, and also how to separate the string on the other side in order to control the client VI.
Again, the actual TCP communication I get, and can operate fine, just formatting all the data into a string (or whatever is required) so that I can unpack on the other side is the issue here.
Another question I have (not impotant to get the program running just might make it easier on me) is can a TCP server (which sends the data to the client) also recieve data back from the client on the same port ( for example sensor data and digital positions [on,off])? Or do I need to set up two TCP communication loops with the first client acting as the server on a different port than the first, which then sends the data to the original server, which also has a client TCP configuration in another loop? I hope this makes sense...
One final question.....I already have a solution to this but using labview for the entirety of this project would be nice. I use skype to stream 1080p video from a webcam to my computer so I can view live feed. Can labview do this? This would be awesome if so, I am just not sure if the communication protocols in use could support real time (or as close as possible to streaming) for 1080p video.
Thanks all in advance for your help,
Physicsnole
Attachments:
cameraserver.vi ‏24 KB
cameraclient.vi ‏18 KB

Physicsnole wrote:
In the attached VI I am trying to send data from a joystick over a TCP connection. I can send data fine using the TCP examples (in fact the majority of my VI is just a copy of the example). However I am to the point where I do not know how to send all the data necessary (3 axis data, 12 buttons, and the POV data) over TCP. Strings, clusters, and arrays were never my strong suite and converting between them is a nightmare for me.
Well, you cast the axis info cluster to a string, but then you cast it back to an array of DBL. Thatr's not compatible. You should probably cast it back to an "axis info" cluster of exactly the same type. Go the the other VI and right-click the cluster wire to create a constant. Now move that diagram cluster constant to the other VI and use it as type.
Your default ports don't seem to match. You seem to have client and server roles confused. In the sever you create a listener, but then you start sending packets, even though no connection is established. The connection needs to be initiated by the client.
Your client stops the loop the first time a timeout is encountered. Shouldn't that be more permanent? Also, please retain code clarity and avoid unecessary complexities. For example, replace the "not or" with a plain "or" and change the loop to "stop if true"
Physicsnole wrote:
Basically I am trying to send each axis data (X,Y, and Z), button data (12 buttons), and POV data (the POV data will be calculated to adjust the position of a camera, so the immediate data is not important, I will add functions to add the change in the button movements to write a standing position for two servos [pan and tilt], for which that I will need to send over the TCP connection) over the TCP connection to control various cameras and motors. I don't know if it is posible to send that much data over a TCP connection in one write VI through a string, and also how to separate the string on the other side in order to control the client VI.
You can send as much as you want. The casting to/from string is the same as described above.
Physicsnole wrote:
Another question I have (not impotant to get the program running just might make it easier on me) is can a TCP server (which sends the data to the client) also recieve data back from the client on the same port ( for example sensor data and digital positions [on,off])? Or do I need to set up two TCP communication loops with the first client acting as the server on a different port than the first, which then sends the data to the original server, which also has a client TCP configuration in another loop? I hope this makes sense..
The primary function of a "server" is to wait for a connection and then communicate with the client once a conenction is established. An established TCP/IP connection is fully two-way and both sides can send and receive.
LabVIEW Champion . Do more with less code and in less time .

I need to find out how much wifi data my apps are using. I have a very limited amount of wifi data, and I am exceeding my monthly allowance. Apparently, even apps I think are not open are sending/receiving data through the wifi and using up my allowance.

I need to find out how much wifi data my apps are using. I am on a very limited amount of WiFi data each month, which I am regularly exceeding. I have been told to work out which of my apps is using the data. Also, I think I have closed an app by double clicking the home button, then swiping the app up - is this the way to close it, or will it still be sending/receiving data?

Go into your Settings : General : and turn off background refresh for your apps. In Settings : Mail turn Fetch new data to OFF and Load Remote Images to OFF. This will mean that Mail will only check for messages when you actually use it, and all your advertising junk mail won't have all the images in it.
Turn off push notifications every chance you get.
Make sure you are actually quitting apps: to quit apps press the Home button twice and you should see a bunch of smaller screen images for every open app. To quit the app swipe from the screen image (not the icon) upward off the top of the iPad. You can swipe left and right to see more open apps, but there must be no left-right movement on the screen when you swipe upward to close the app.
Turn off your internet connection when you do not need it. The easiest way to do this is to swipe up from the bottom of you screen to get the control centre, and then touch the airplane to turn on airplane mode. You can repeat this sequence to turn it back on again when you need it. Most especially turn airplane mode on whenever you are sleeping your iPad for long periods. This will save battery life too. OR actually turn your iPad off - which means holding the power key down for several seconds until the red swipe bar appears, and then swipe to turn it off. If you go this route, note that it will take longer to turn on then it takes to wake from sleep.

Sending quiz data to LMS

Similar Messages

Maybe you are looking for