Sending screenshot with working links

I called Apple this morning and got the impression that what I want to do can't be done. All I want to do is to be able to copy/capture a selected portion of the screen and send it to someone as part of my letter. However, the screenshot I send will contain text, picture, and activated links. I want the links in the screenshot the recipient receives to also be activated links. I know how to send the entire page, but my idea was to be able to include working sections from several sites. I think that would be a more interesting and effective presentation. Can it be done?
I've tried Grab, Command key-Shift key-4, and Screenshot Plus, but they couldn't do what I want. I've also written to several companies that sell copy/capture software, but have not yet received their replies.

It may seem simple, but a screenshot isn't much different than if you snapped a picture of your screen with a camera. You wouldn't expect a digital photo taken with your camera to automatically detect and activate links, so why a screenshot?
I'd suggest that you're probably going about the problem all wrong. I'm guessing that you're sending screenshots of either a web page or a document on your computer. In the former case, just send the address of the web page (copy from the browser's address bar) so people can view that page themselves, and in the latter, send either the document or a PDF copy. (You can make a PDF copy by choosing File -> Print, then clicking the PDF button in the lower left corner of the print window and choosing Save As PDF. Note that you can print only a limited page range if desired, and links in the document should remain links in the PDF file.)

Similar Messages

I put together and sent 10 pictures from my granddaughter's birthday party. Is there a way of sending them with a link recipients can click on, rather than having all the pictures download as part of the email message?

I put together and sent 10 pictures from my granddaughter's birthday party. Is there a way of sending them with a link recipients can click on, rather than having all the pictures download as part of the email message?

Hello userlarry, do you have Mobile Me? You could use that. Or you could compress them, you would still need to send them in an email, but it would help with size limitations of emails.
To compress them, put them in a folder and right click on the folder. You should see a Compress option. Then just drag the .zip file into your mail.
Regards,
Graham

Sending email with a link.

Hi,
I am facing some issues while sending mass email with a link to the users.The Body content of the email comes from smartform.Now if the user wants to Unsubscribe emails he just needs to click on the Unsubscibe link and the URL (something like https://.....com, not a part of email) should open.
If anybody has worked on such a scenario, appreciate if you can provide some valuable inputs on it.

Hi
refer this ,a very good material in SCN regarding your question.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/db03523c-0a01-0010-d2a4-a462d386cb3d
regards
Sachin

"Save as PDF" - with working Links?

Hi there,
I just realized that when I use the "Print -> Save as PDF" function, it does not save the links into the PDF. Thus, when opening the file into Preview the links within the document don't work anymore.
Any idea how this could be changed?
Thanks for any advice!

How about choosing "Mail Contents of This Page" from the File menu for the alternative?
It enables the current page to save and email to yourself...
Yoshinobu
Message was edited by: Yoshinobu Morioka
Message was edited by: Yoshinobu Morioka

I have trouble with website links not working but they work fine on I.E. it's a problem on quite a few sites .

The problem I'm having is the links are just unclickable . I have checked all the settings and everything seems ok , but the links are not working . Everything is fine in I.E. and I am not having any problems , it appears to only be when using mozilla . On this site http://compare100.com it's the links at the bottom of the page , is any body else having the same issue ?

After a bit more troubleshooting... This appears to be a CSS float clearing issue. In a page with both left and right floated containers, if the float is not cleared in one of various ways, Firefox may render the page properly, but the hyperlinks do not function. By clearing the float in the application of the page footer division, I am able to correct the problem in my web page structure such that all browsers render correctly with working links. When you experience this problem, you won't be able to do anything to Firefox to correct it, the page owner will have to resolve their stylesheets, unless a patch or something comes out to address whatever causes Firefox to behave this way.

Print web page to PDF file with live links in PDF file like Apple Safari's pdf prints?

With Firefox for Macintosh, can I print a web page to PDF in such a manner that when I option the PDF file and click on a link, it is a live link that opens in my system's default web browser?
With Apple Safari, when I print a web page to a PDF file, the links on that page are "live" and work to open the web browser to their destination. The PDF files I get from Firefox are dead. Clicking on link does not open in browser.
Is there a way to get FireFox to act more like Safari in this regard?
Thanks

Seems the referenced thread is about Lion. I am having this problem in Snow Leopard 10.6.5 with Firefox. Any way to get PDFs with working links in Snow Leopard using FIrefox? I do not really want to have to use Safari for this purpose.
Going forward when and under what circumstances will future versions of Firefox be able to create PDFs with live links? Are there any circumstances where a current or past version of Firefox can do it under any current or past version of OS X?
Thanks.

How to send a email with a link

Hi All,
            I have a scenario where I have to send an email to a person informing him about the workitem
            Now this user is not a SAP user so i have to send a link to him of a web page where he will execute
            the work item.Please advice about how to send the email with a link.
Thanks in Advance,
Saket.

Hi,
If you are using a Workflow, in the send mail step type, simply write the e-mail link and press enter.
when the user sees the same in the outlook, he will get them as a link but this does not happens when the mail is seen in the SAp INBOX.
if you are using the FM, give the document type as 'HTM', to send mail.
This will work for you.
Let me know if u face any issues
Regards,
Kanika

TS3899 Cannot send email with new iPad air. Works fine with old iPad and iPhone.

Cannot send email with new iPad air. Works fine with old iPad and iPhone. I have deleted account and reinstalled.

Thanks. I got the problem fixed. Spent time with the Apple folks and was kicked up to a senior advisor. It seems the problem was with my internet provider - Tmie Warner. Remember I could use the old ipad and the iphone to send mail. I checked all the specifics between the three units. It seems that TW is changing over from the RR.com to TWC.com. Since the new ipad air was just set up, it fell under the new TWC mail specifics.

Hi, I am wondering why my iphone won't send pictures through messages, I have MMS on and I have tried sending it with 3G on aswell and still doesn't work. Someone please help me :)

Hi, I am wondering why my iphone won't send pictures through messages, I have MMS on and I have tried sending it with 3G on aswell and still doesn't work. Someone please help me :)

Hey lozza567,
Thanks for the question. I understand that you are experiencing issues sending MMS messages. The following resource may provide a solution:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Issues with sending and receiving MMS
You will need these to send and receive MMS:
- An iPhone 3G or later.
- iOS 3.1 or later.
- A cellular data connection. MMS isn't available if you are using only Wi-Fi.
- A domestic MMS plan from your cellular provider. You may need an international messaging plan to send MMS to an international contact. Contact your carrier for more information.
- A roaming MMS when using a cellular provider's network different from your billing cellular provider's network. Learn more about roaming and contact your carrier for more information.
To resolve issues with sending and receiving MMS, follow these steps first
1. Go to Settings and turn airplane mode off.
2. Go to Settings > Messages and turn MMS Messaging on.
3. Go to Settings > Cellular and turn Cellular Data on.
4. Go to Settings > Cellular and turn Data Roaming on if you are roaming on a cellular provider network different from your billing provider's network.
5. Verify that you have a cellular data connection in the status bar at the top left of your iPhone.
6. Go to Settings and turn Wi-Fi off. Open Safari and navigate to www.apple.com to verify that you have a data connection. Turn Wi-Fi back on to continue using Wi-Fi for other features. If your cellular data connection isn't available, follow these steps.
7. Verify that you can send and receive SMS. If you are unable to send and receive SMS, see the "Issues with sending and receiving SMS" section, above.
8. MMS may not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports.
9. Restart your iPhone.
10. Tap Settings > General > Reset > Reset Network Settings on your iPhone.
11. Reseat your SIM card.
If you are still unable to send or receive MMS, follow these steps
1. Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
2. Go to Settings > Messages and turn on group messaging if you are sending a group message.
3. Make sure that you are using the area code with the contact's phone number. When sending messages internationally, you also need the contact's international code.
4. Verify a "Pay as you go" MMS plan has enough available balance. Contact your carrier if unsure of your MMS plan or available balance.
5. If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
6. If the issue occurs with a specific contact or contacts, delete and re-create the contact from the Contacts application. Create a new message to the newly created contact and try again.
7. Back up and restore your iPhone as new.
8. If your carrier has recently ported your phone number, the porting process may not be complete. Contact your carrier to confirm that the porting process is complete.
9. Contact your carrier to verify that you are provisioned to send SMS and are in an area with cellular coverage.
10. Contact your carrier to verify that there are no blocks or filters placed on your wireless account preventing you from sending SMS.
11. Your carrier may require APN settings to be modified to use MMS. Learn more about when you should adjust APN settings.
Thanks,
Matt M.

My camera icon is not working on my sms so i cant send picture with sms? what to do?

My camera icon is not working on my sms part?
so i cant send picture with sms? what to do?

Double tap Home button, delete Camera app in multitask-bar.
Do a
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
By the way, picture go through as MMS not SMS, do you have a SMS/MMS plan with your carrier?
Have you spoken with them?

I would like to send an email with a link to an app I found in the app store. How do I do that?

I would like to send an email with a link to an app I found on the App Store. How can I do that?

Can you help me with this one. I cannot seem to add an active link to a web site to an email. In windows I have the option to "add a link" and it will show up as a hot link that can be clicked on to open the site.
Thanks

Unable to send mp3 with mail attachment. Zip the file doesn't work same

Tried to send an mp3 file several times and kept getting this message. The file was only 11 mg.
Unable to send with mail attachment.
Your message couldn't be sent because a server error occurred. To send this message,please delete the current attachment,then re-attach.
iMac, Mac OS X (10.7.2)
Toad replyed try zip file (compress) I did and still got the same message

Many mail servers cap their message sending or receiving at 4MB. If you are sending your own work that you want distributed by someone else, check with your internet provider if they can temporarily raise that restriction and the recipient's mail server can temporarily raise those restrictions. Better would be for both of you to be able to access a webhosting site to share the material and use some FTP programs to send the file to each other. If it is an MPEG-3 of a commercial CD's music, we can't help you as such distribution is illegal.

Send mail with business object link

Hi,
can anyone please tell me, how can i send a mail with an business object as an attachement. when i clik on attachment, it should execute the method of business object which will display the document.
it will be a great help,if any one can send the code.
Thanks,
naresh.

Hi,
You need classes CA_SAPUSER_BCS and CL_CAM_ADDRESS_BCS .
CLASS ca_sapuser_bcs DEFINITION LOAD.
CLASS cl_cam_address_bcs DEFINITION LOAD.
You require the following local variables:
DATA: send_request TYPE REF TO cl_bcs.
DATA: document TYPE REF TO cl_document_bcs.
DATA: sender TYPE REF TO cl_sapuser_bcs.
DATA: recipient TYPE REF TO if_recipient_bcs.
DATA: exception_info TYPE REF TO if_os_exception_info,
bcs_exception type ref to cx_bcs.
DATA: num_rows type i.
DATA: textlength type SO_OBJ_LEN.
First create a mail request:
send_request = cl_bcs=>create_persistent( ).
Create the mail sender:
Get sender object
sender = cl_sapuser_bcs=>create( sy-uname ).
Add sender
CALL METHOD send_request->set_sender
EXPORTING i_sender = sender.
You can define your mail address in this Web Application Server in the user maintenance.
The mail can be sent to one or more addresses:
Create recipient
data: c_address TYPE ADR6-SMTP_ADDR.
move mail_address to c_address.
recipient = cl_cam_address_bcs=>create_internet_address(
c_address ).
Add recipient with its respective attributes to send request
CALL METHOD send_request->add_recipient
EXPORTING
i_recipient = recipient
i_express = ' '
i_copy = ' '
i_blind_copy = ' '.
You receive the mail address as a string and you have to convert in into the required data type.
The mail is sent to one address only without any additional attributes.
You can now send the mail and write everything to the database.
Send document
CALL METHOD send_request->send( ).
COMMIT WORK.
You still have not taken any precautions against error situations.
You can take care of this by embedding the following code in a TRY CATCH block:
try.
... Now the code comes after the creation of send_request up to the COMMIT WORK:
catch cx_bcs into bcs_exception.
if messages is not initial.
messages->add_message( condition = 'mail'
message =
'Error occurred while sending the mail' )."#EC NOTEXT
endif.
exit
endtry.
Reward if it is helpful.
Regards,
Rajesh

Active state not working in scrolling site (with anchor links)

I'm design a scrolling site with anchor links and an horizontal menu on the top.
when i publish the site and click on the menu buttons the site scrolling to the place of the anchor but the active state in the menu is not working.
now... when i leave the main page (were the scrolling site is) and then return back to it all active states are working perfectly
anyone have this bug? or any one know how to fix it ?

Hmmm...I've just been playing around, and I think I got the Active State to work correctly. I think my problem was not understand what Active State means.
To answer your question, I was changing the Font Color and Box Fill Color of the Active State.
I did not understand that Active State means the look of the Menu Item when the PAGE is active. I thought it meant the look of the Menu item when the cursor is scrolling down the Menu (i.e. when the MENU is Active, not the page).
Look at this page for an example of what I'm trying to achieve...
http://www.pgavdestinations.com
When you hover over the "Work" menu item, and move the cursor down the menu, the state of "Work" remains changed until you move the cursor off of that menu column. It does NOT return back to it's Normal state until you are off of that menu column.
Is there a way to achieve this with the menu states in Muse?
Thanks for the replies!
Dave.

SAP PI FTP sender adapter not working with SAP ECC over Itanium

Hi,
We have been running normally SAP PI 7.0 SP14 with no issue for a while.
We are now in the process of migrate the SAP ECC system from PA risc to IA platform. We are performing some tests between SAP PI and SAP ECC to check that the platform migration is not affecting us in any way and we have found that FTP adapter sender is not working anymore (receiver is working as usual).
We place some files in the new ECC system and when PI goes to retreive the files it is like it can not read anything. It gives no error but it does not pick any file. This is not happening with the old platform.
Does anyone have any idea?
Thanks a lot for your help
Diana

Hi,
I am using FTP connection and for the receiver it is working fine.
Thanks
Diana

Sending screenshot with working links

Similar Messages

Maybe you are looking for