Sending Smart form to Printer in SRM
Hi All,
I am trying to send a smartform to Printer in SRM ITS. I gave output options and control parameters . When i see the Print dialog box i dont see the Front end printers in that. Normally when we pass LOCL we should see default printer in Print dialog.
When i do print, spool is creating but its not printing at local printer .
I am doing this in SRM ITS ... could you kindly any one tell me what steps need to take to print a smart form at local printer when we call form ?
Thanks
Hi
Please elaborat, when you need this SMARTFORM to get triggered.
By the way, Have you tried implementaing the following BADIs ?
BBP_CHANGE_SF_BID Smartform for E-Mails to Bidder
BBP_CHANGE_SF_CTR Change Smart Form for Contract Output
BBP_CHANGE_SF_ERS Change Smart Form
BBP_CHANGE_SF_SC Smart Form Shopping Cart Print
BBP_CHANGE_SF_VERS Change Smart Form for Version Comparison
BBP_PROCESS_AUC Process Smart Form with Changed Interface
BBP_PROCESS_BID Process Smart Form with Changed Interface
BBP_PROCESS_CTR Process Smart Form with Changed Interface
BBP_PROCESS_PO Process Smart Form with Changed Interface
BBP_PROCESS_QUOT Process Smart Form with Changed Interface
Hope this will help.
Please rewards suitable points.
Regards
- Atul
Similar Messages
-
Need to send Smart form via email through Driver program
Hi All,
We need to send smart form via email through a new driver program (z program). Can you please guide me on this.
I have used the following code to achieve this. We are getting message saying 'Mail request has created' when executed, but the mail is not sent.
lvs_comm_type = 'INT'.
lvs_comm_values-adsmtp-SMTP_ADDR = e_mail.
lvs_comm_values-adsmtp-R3_USER = 'X'.
lvs_comm_values-adsmtp-ENCODE = '0'.
call function 'CONVERT_COMM_TYPE_DATA'
exporting
pi_comm_type = lvs_comm_type
pi_comm_values = lvs_comm_values
pi_screen = ' '
pi_newid = 'X'
importing
pe_itcpo = lvs_itcpo
pe_device = lvf_device
pe_mail_recipient = p_mail_recipient
pe_mail_sender = p_mail_sender
exceptions
comm_type_not_supported = 1
recipient_creation_failed = 2
sender_creation_failed = 3
others = 4.
if sy-subrc ne 0.
raise COMMUNICATION_ERROR.
endif.
control_parameters-device = 'MAIL'.
output_options-TDIMMED = 'X'.
output_options-TDDELETE = 'X'.
CALL FUNCTION fm_name
exporting
CONTROL_PARAMETERS = control_parameters
MAIL_RECIPIENT = mail_recipient
MAIL_SENDER = mail_sender
OUTPUT_OPTIONS = output_options
USER_SETTINGS = space
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
Thank youHi,
For sending smartform output into mail you first have to generate spool request and convert it into PDF and then
only it can be sended into mail, please find the sample code in the mail below:
http://wiki.sdn.sap.com/wiki/display/sandbox/ConversionofSpoolRequestDataintoPDFandExcelFormatandSenditintoMail
Mansi
Edited by: Matt on Jan 29, 2010 8:25 AM - removed code, instead point to wiki that Mansi authored. -
Replacing Adobe forms with Smart Forms for printing FPM based forms
Hello All,
This pertains to HCM Process and Forms with Floor Plan Manager (FPM) based forms.
SAP has provided Adobe Forms as the standard print option for FPM based forms, as can be seen in the attached screenshot.
We want to use the FPM based forms without using Adobe Document Services (ADS). I am checking the feasibility of replacing the PDF forms with Smart Forms, either through configuration or customization.
System Landscape: ECC 6.0 EhP6
Any inputs or suggestions would be greatly appreciated.
Regards,
Arun.Hi Ketul,
Irrespective of the process or scenario, we would like to use Smart Forms instead of Adobe Forms. As seen in the screenshot, SAP has provided the default option of generating a PDF form. This requires installing and using Adobe Document Services. We would like to remove this dependency on Adobe Document Services.
Instead, we would like to use Smart Forms for printing purposes.
This requirement is not tied to any specific process or scenario, but to any business process implemented using HCM Process and Forms framework.
Let me know if you need any further clarifications.
Regards,
Arun. -
Smart Form Language Print Problem
Hi ,
i want to ask that in PO smart form if i am taking print preview. then vendor & Shipping Address are not coming in print preview...another fields are coming like tele & Fax No these are store in numeric value but these name1 and street store in taiwan Lang..
then data fetch from ARDC table but ARDC-name1 and ADRC-street store data in taiwan lang..so these two fields data is not displaying in taiwan lang during print preview but some other format is displaying like squrae shape.....
so plz send me solution...ASAP...
Thanks
Amit NigamHi,
Pick up the Address using user log on language instead of adrc-spras Or the language which user wants to display on the form.
Alternatively u can also code the driver program in such a way so that, if the the sy-langu is EN pick the address in EN or pick the address in Taiwan language.
ADRC-Nation is set in such case.
Another solution is the master data for the vendor has to be first maintained in English and then international versions have to be maintained in various languages.
Thanks,
Rashmi -
Smart forms and print program needed
Can anyone provide me with the following print programs and smart forms? I can't find it in my SAP. Thanks.
Print Program:
/SMB40/M07DR
Smart Forms:
/SMB40/MMGR1_A
/SMB40/MMGR3_A
/SMB40/MMGI1_A
Please kindly email me at [email protected]Hi
I appreciate for your sincierty i cant send through mail but i'm sending directly plz copy all the programs
INCLUDE /SMB40/M07DRTOP.
PROGRAM /BPR3PF/m07dr MESSAGE-ID m7.
DATA lgortsplit LIKE am07m-xselk.
DATA ladr LIKE sadr.
DATA *ladr LIKE sadr.
CONSTANTS: a TYPE c VALUE 'A',
b TYPE c VALUE 'B',
c TYPE c VALUE 'C',
d TYPE c VALUE 'D',
e TYPE c VALUE 'E',
f TYPE c VALUE 'F',
g TYPE c VALUE 'G',
h TYPE c VALUE 'H',
i TYPE c VALUE 'I',
j TYPE c VALUE 'J',
k TYPE c VALUE 'K',
l TYPE c VALUE 'L',
m TYPE c VALUE 'M',
n TYPE c VALUE 'N',
o TYPE c VALUE 'O',
p TYPE c VALUE 'P',
q TYPE c VALUE 'Q',
r TYPE c VALUE 'R',
s TYPE c VALUE 'S',
t TYPE c VALUE 'T',
u TYPE c VALUE 'U',
v TYPE c VALUE 'V',
w TYPE c VALUE 'W',
x TYPE c VALUE 'X',
y TYPE c VALUE 'Y',
z TYPE c VALUE 'Z'.
CONSTANTS: plus TYPE c VALUE '+',
minus TYPE c VALUE '-',
punkt TYPE c VALUE '.',
null TYPE c VALUE '0',
eins TYPE c VALUE '1',
zwei TYPE c VALUE '2',
drei TYPE c VALUE '3',
vier TYPE c VALUE '4',
fuenf TYPE c VALUE '5',
sechs TYPE c VALUE '6',
sieben TYPE c VALUE '7',
acht TYPE c VALUE '8',
neun TYPE c VALUE '9',
einsi TYPE i VALUE '1',
zweii TYPE i VALUE '2',
dreii TYPE i VALUE '3',
vieri TYPE i VALUE '4',
nzwei TYPE i VALUE '02',
ndrei TYPE i VALUE '03'.
CONSTANTS: actvt01 LIKE tact-actvt VALUE '01',
actvt02 LIKE tact-actvt VALUE '02',
actvt03 LIKE tact-actvt VALUE '03',
actvt04 LIKE tact-actvt VALUE '04',
actvt06 LIKE tact-actvt VALUE '06',
actvt65 LIKE tact-actvt VALUE '65',
actvt70 LIKE tact-actvt VALUE '70'.
CONSTANTS: maximum TYPE f VALUE 9999999999999,
minimum TYPE f VALUE -9999999999999,
maximum_gld TYPE f VALUE 99999999999,
minimum_gld TYPE f VALUE -99999999999,
maxvalue LIKE am07m-maxvalue VALUE 9999999999999,
minvalue LIKE am07m-maxvalue VALUE -9999999999999,
cnull(18) TYPE c VALUE '000000000000000000',
pf02(4) TYPE c VALUE 'PF02',
pf15(4) TYPE c VALUE 'PF15',
stern TYPE c VALUE '*',
doublestar(2) TYPE c VALUE '**',
underscore TYPE c VALUE '_',
slasch TYPE c VALUE '/',
dpunkt TYPE c VALUE ':',
curtp00 LIKE smbew-curtp VALUE '00', "Transaktionswährung
curtp10 LIKE smbew-curtp VALUE '10', "ML in Hauswährung
auto_best LIKE mseg-ebeln VALUE '9999999999',
modulpool LIKE sy-repid VALUE 'SAPMM07M'.
CONSTANTS: BEGIN OF hlp,
b(4) TYPE c VALUE 'HLPB',
f(4) TYPE c VALUE 'HLPF',
g(4) TYPE c VALUE 'HLPG',
m(4) TYPE c VALUE 'HLPM',
r(4) TYPE c VALUE 'HLPR',
v(4) TYPE c VALUE 'HLPV',
END OF hlp.
"Equates für Alphabet
TABLES:
afko,
aufk,
itcpo,
mkpf,
*mkpf,
mseg,
*mseg,
ekko,
ekkn,
*ekko,
arc_params,
ekpo,
ekbe,
lfa1,
*lfa1,
thead,
toa_dara,
am07m,
*am07m,
t001,
t001w,
*t001w,
t027b,
t027c,
t027d,
t156,
t156t,
t157e,
*t157e,
t159m,
t159n,
t159o,
t159p,
t159s,
t159e,
t024,
t024d,
*t024,
t064b,
nast,
*nast,
tnapr.
TABLES: mabdr,
mtcom,
mtcor,
twlad.
* Reportinterne Daten *
*--- Strukturen ------------------------------------------------------*
DATA: x_protab TYPE c,
x_bwart TYPE c,
bwart LIKE mseg-bwart,
eintraege LIKE sy-tfill,
anzahl LIKE mseg-weanz,
anzahl1(7) TYPE n,
x_kont TYPE c, "Mehrfachkontierung
x_kont1 TYPE c, "Einfache Kontierung (WE unbewertet)
x_form TYPE c,
x_open TYPE c.
DATA: BEGIN OF jahr,
jahr(4) TYPE n,
monat(2) TYPE n,
tag(2) TYPE n,
END OF jahr.
DATA:
BEGIN OF we,
version1 VALUE '1', "Standardversion
version2 VALUE '2', "Version mit Prüftext
version3 VALUE '3', "WE-Sammelschein
END OF we,
BEGIN OF alt,
matnr LIKE mseg-matnr,
bwart LIKE mseg-bwart,
ebeln LIKE mseg-ebeln,
usnam LIKE mkpf-usnam,
END OF alt,
BEGIN OF kunde,
kdauf LIKE mseg-kdauf,
kdpos LIKE mseg-kdpos,
kdein LIKE mseg-kdein,
END OF kunde,
BEGIN OF anlage,
anln1 LIKE mseg-anln1,
anln2 LIKE mseg-anln2,
END OF anlage,
BEGIN OF belpos,
mblnr LIKE mseg-mblnr,
zeile LIKE mseg-zeile,
END OF belpos,
xskkz,
xpsty,
xkdanr VALUE 'C',
xkde VALUE 'E',
xfert VALUE 'F',
xrvkdanr VALUE 'A',
xanlage VALUE 'A',
xanln1 VALUE 'I',
xkostl VALUE 'K',
xprojn VALUE 'P',
xmunbw VALUE 'M',
xumlag VALUE 'U',
xvbelg VALUE 'V',
xnplan VALUE 'N',
xkonsi(2) VALUE 'KB',
xwabel(2) VALUE 'WA',
xwibel(2) VALUE 'WI',
xwebel(2) VALUE 'WE',
xsele, "Position selektiert
xkont, "Kontierungswechsel
xsamm, "Sammel-WE-Schein
xanha. "Mehrfachkontierung
DATA BEGIN OF theader.
INCLUDE STRUCTURE thead.
DATA END OF theader.
*--- Interne Tabellen -------------------------------------------------*
DATA:
BEGIN OF dummy OCCURS 0,
dummy,
END OF dummy.
DATA:
BEGIN OF ausgabe OCCURS 20,
mblnr LIKE mseg-mblnr,
END OF ausgabe.
DATA: BEGIN OF xekkn OCCURS 50.
INCLUDE STRUCTURE ekkn.
DATA: END OF xekkn.
DATA: BEGIN OF xmseg OCCURS 50.
INCLUDE STRUCTURE mseg.
DATA: END OF xmseg.
DATA: BEGIN OF dtext OCCURS 1.
INCLUDE STRUCTURE tline.
DATA: END OF dtext.
DATA: BEGIN OF dktext OCCURS 1.
INCLUDE STRUCTURE tline.
DATA: END OF dktext.
DATA: BEGIN OF dptext OCCURS 1.
INCLUDE STRUCTURE thead.
DATA: END OF dptext.
DATA: BEGIN OF nast_key,
mblnr LIKE mkpf-mblnr,
mjahr LIKE mkpf-mjahr,
zeile LIKE mseg-zeile,
END OF nast_key.
DATA: BEGIN OF beltab OCCURS 20.
INCLUDE STRUCTURE mseg.
DATA: vgart LIKE mkpf-vgart,
blart LIKE mkpf-blart,
blaum LIKE mkpf-blaum,
bldat LIKE mkpf-bldat,
budat LIKE mkpf-budat,
cpudt LIKE mkpf-cpudt,
cputm LIKE mkpf-cputm,
aedat LIKE mkpf-aedat,
usnam LIKE mkpf-usnam,
tcode LIKE mkpf-tcode,
xblnr LIKE mkpf-xblnr,
bktxt LIKE mkpf-bktxt,
frath LIKE mkpf-frath,
frbnr LIKE mkpf-frbnr,
wever LIKE mkpf-wever,
kzdru LIKE t156-kzdru,
END OF beltab.
DATA: BEGIN OF traptab OCCURS 50.
INCLUDE STRUCTURE mseg.
DATA: vgart LIKE mkpf-vgart,
blart LIKE mkpf-blart,
blaum LIKE mkpf-blaum,
bldat LIKE mkpf-bldat,
budat LIKE mkpf-budat,
cpudt LIKE mkpf-cpudt,
cputm LIKE mkpf-cputm,
aedat LIKE mkpf-aedat,
usnam LIKE mkpf-usnam,
tcode LIKE mkpf-tcode,
xblnr LIKE mkpf-xblnr,
bktxt LIKE mkpf-bktxt,
frath LIKE mkpf-frath,
frbnr LIKE mkpf-frbnr,
wever LIKE mkpf-wever,
END OF traptab.
DATA: BEGIN OF inthead OCCURS 50.
INCLUDE STRUCTURE thead.
DATA: END OF inthead.
DATA: BEGIN OF intline OCCURS 50.
INCLUDE STRUCTURE tline.
DATA: END OF intline.
DATA: BEGIN OF intline1 OCCURS 50.
INCLUDE STRUCTURE tline.
DATA: END OF intline1.
*-------- Hilfsfelder -------------------------------------------------*
DATA: index_z LIKE sy-tabix,
drucker LIKE rm07m-ldest,
old_tdform LIKE t159o-tdform,
r_werks LIKE t001w-werks,
r_name1 LIKE t001w-name1,
x_form3 TYPE c,
x_nopdest TYPE c,
language LIKE t001w-spras,
zaehler_m LIKE sy-tabix,
edruck TYPE c.
DATA: old_mkpf LIKE mkpf-usnam,
old_budat LIKE mkpf-budat,
old_cpudt LIKE mkpf-cpudt,
old_werks LIKE t001w-werks,
old_name1 LIKE t001w-name1,
old_mblnr LIKE mkpf-mblnr,
old_lifnr LIKE ekko-lifnr,
old_ebeln LIKE ekko-ebeln,
old_ekgrp LIKE ekko-ekgrp,
old_reswk LIKE ekko-reswk,
old_linam LIKE am07m-name1,
old_lina2 LIKE am07m-name2,
old_eknam LIKE t024-eknam,
old_ektel LIKE t024-ektel,
old_ematn LIKE mseg-ematn,
old_lfa1 LIKE lfa1,
old_lgort LIKE mseg-lgort,
old_ladr LIKE ladr,
save_mkpf LIKE mkpf-usnam,
save_budat LIKE mkpf-budat,
save_cpudt LIKE mkpf-cpudt,
save_werks LIKE t001w-werks,
save_name1 LIKE t001w-name1,
save_mblnr LIKE mkpf-mblnr,
save_lifnr LIKE ekko-lifnr,
save_reswk LIKE ekko-reswk,
save_ebeln LIKE ekko-ebeln,
save_ekgrp LIKE ekko-ekgrp,
save_linam LIKE am07m-name1,
save_lina2 LIKE am07m-name2,
save_eknam LIKE t024-eknam,
save_ektel LIKE t024-ektel,
save_ematn LIKE mseg-ematn,
save_lfa1 LIKE lfa1,
save_lgort LIKE mseg-lgort,
save_ladr LIKE ladr,
offwhile TYPE c,
& TYPE c VALUE '&',
blank TYPE c VALUE ' ',
fenster(5) TYPE c VALUE 'WIN ',
fcount(2) TYPE c,
text1(21) TYPE c VALUE 'INTLINE-TDLINE+ ( )',
text2(22) TYPE c VALUE 'INTLINE1-TDLINE+ ( )',
text5(22) TYPE c VALUE 'INTLINE1-TDLINE+ ( )',
hifeld1(21) TYPE c VALUE 'INTLINE-TDLINE+ (10)',
shift(2) TYPE n,
fpage LIKE sy-pagno,
xscreen(1) TYPE c,
retco LIKE sy-subrc,
mblnr LIKE mkpf-mblnr,
zeile LIKE mseg-zeile,
new_page,
xkopfdr, "Kopf bereits gedruckt
n_vornr LIKE resb-vornr. "Netzplanvorgang
INCLUDE /SMB40/M07DRMTA.
*------Lesen Tabelle T001----------------------------------------------*
FORM TAB001_LESEN.
IF NOT T001-BUKRS = MSEG-BUKRS.
SELECT SINGLE * FROM T001 WHERE BUKRS = MSEG-BUKRS.
ENDIF.
ENDFORM.
*-------Lesen Tabelle T001w--------------------------------------------*
FORM TAB001W_LESEN.
IF NOT T001W-WERKS = MSEG-WERKS.
SELECT SINGLE * FROM T001W WHERE WERKS = MSEG-WERKS.
ENDIF.
R_WERKS = T001W-WERKS.
R_NAME1 = T001W-NAME1.
* Sprache für Formular aus Kondition, sonst aus Werk
IF NOT NAST-SPRAS IS INITIAL.
LANGUAGE = NAST-SPRAS.
ELSE.
LANGUAGE = T001W-SPRAS.
ENDIF.
SET LANGUAGE LANGUAGE.
ENDFORM.
*-------Lesen Tabelle T001w bei Werkswechsel --------------------------*
FORM TAB001W_LESEN_2.
IF NOT MSEG-WERKS = T001W-WERKS.
SELECT SINGLE * FROM T001W WHERE WERKS = MSEG-WERKS.
ENDIF.
ENDFORM.
*--------Lesen Tabelle T156--------------------------------------------*
FORM TAB156_LESEN.
IF NOT T156-BWART = MSEG-BWART.
SELECT SINGLE * FROM T156 WHERE BWART = MSEG-BWART.
ENDIF.
ENDFORM.
*-------Lesen Tabelle T156t--------------------------------------------*
FORM TAB156T_LESEN.
SELECT SINGLE * FROM T156T WHERE SPRAS = LANGUAGE
AND BWART = MSEG-BWART
AND SOBKZ = MSEG-SOBKZ
AND KZBEW = MSEG-KZBEW
AND KZZUG = MSEG-KZZUG
AND KZVBR = MSEG-KZVBR.
ENDFORM.
*------Lesen Tabelle T024----------------------------------------------*
FORM TAB024_LESEN.
IF NOT T024-EKGRP = EKKO-EKGRP.
SELECT SINGLE * FROM T024 WHERE EKGRP = EKKO-EKGRP.
ENDIF.
ENDFORM.
*------Lesen Tabelle T024D---------------------------------------------*
FORM TAB024D_LESEN.
SELECT SINGLE * FROM T024D WHERE WERKS = MSEG-WERKS
AND DISPO = AFKO-DISPO.
ENDFORM.
*---------------------- T027B,C lesen ---------------------------------*
FORM T027_LESEN.
SELECT SINGLE * FROM T027B WHERE SPRAS = LANGUAGE
AND EVERS = MSEG-EVERS.
CHECK NOT MSEG-EVERE IS INITIAL.
SELECT SINGLE * FROM T027C WHERE EVERS = MSEG-EVERS
AND EVERE = MSEG-EVERE.
IF NOT T027C-EVDRK IS INITIAL.
SELECT SINGLE * FROM T027D WHERE SPRAS = LANGUAGE
AND EVERS = MSEG-EVERS
AND EVERE = MSEG-EVERE.
ENDIF.
ENDFORM.
*------------ Lesen der Tabelle T159P Barcode oder Mehrfachdruck ------*
*----------------------- gewünscht ? ----------------------------------*
FORM LESEN_T159P.
IF NOT T159P-TDDEST = NAST-LDEST.
SELECT SINGLE * FROM T159P WHERE TDDEST = NAST-LDEST.
ENDIF.
ENDFORM.
*& Form T064B_LESEN
* Lesen Text zur Bestandsart Qualität/Gesperrt bei WE
FORM T064B_LESEN.
DATA: BSTAR LIKE T064B-BSTAR.
CASE MSEG-INSMK.
WHEN SPACE.
CLEAR T064B.
EXIT.
WHEN F.
CLEAR T064B.
EXIT.
WHEN X.
BSTAR = ZWEI.
WHEN ZWEI.
BSTAR = ZWEI.
WHEN S.
BSTAR = VIER.
WHEN DREI.
BSTAR = VIER.
ENDCASE.
IF NOT T064B-BSTAR = BSTAR.
SELECT SINGLE * FROM T064B WHERE SPRAS = LANGUAGE
AND BSTAR = BSTAR.
ENDIF.
ENDFORM. " T064B_LESEN
INCLUDE /SMB40/M07DRMMA.
*---------Material lesen-----------------------------------------------*
FORM MATERIAL_LESEN.
CLEAR MTCOM.
MTCOM-KENNG = 'MABDR'.
MTCOM-MATNR = MSEG-MATNR.
MTCOM-WERKS = MSEG-WERKS.
MTCOM-LGORT = MSEG-LGORT.
MTCOM-SPRAS = LANGUAGE.
MTCOM-NOMUS = 'X'.
CALL FUNCTION 'MATERIAL_LESEN'
EXPORTING
SCHLUESSEL = MTCOM
IMPORTING
MATDATEN = MABDR
RETURN = MTCOR
TABLES
SEQMAT01 = DUMMY.
IF NOT T156-KZMHD IS INITIAL.
IF NOT MABDR-MHDLP IS INITIAL.
IF T001W-VLFKZ = B. "Zentrale ?
PERFORM MHD_BERECHNEN.
ENDIF.
ENDIF.
ENDIF.
ENDFORM.
*----------------- Mindesthaltbarkeit berechnen ---------------------*
FORM MHD_BERECHNEN.
IF NOT EKPO-MHDRZ IS INITIAL.
AM07M-MHDAT = MSEG-VFDAT - ( EKPO-MHDRZ * MABDR-MHDLP / 100 ).
ELSEIF NOT MABDR-MHDRZ IS INITIAL.
AM07M-MHDAT = MSEG-VFDAT - ( MABDR-MHDRZ * MABDR-MHDLP / 100 ).
ENDIF.
ENDFORM.
*----------------- Prueftext lesen-------------------------------------*
FORM PRUEFTEXT_LESEN.
CLEAR DPTEXT.
CLEAR THEADER.
REFRESH DPTEXT.
THEADER-TDID = 'PRUE'.
THEADER-TDSPRAS = LANGUAGE.
THEADER-TDNAME = MSEG-MATNR.
THEADER-TDOBJECT = 'MATERIAL '.
CALL FUNCTION 'SELECT_TEXT'
EXPORTING
ID = THEADER-TDID
LANGUAGE = THEADER-TDSPRAS
NAME = THEADER-TDNAME
OBJECT = THEADER-TDOBJECT
IMPORTING
ENTRIES = EINTRAEGE
TABLES
SELECTIONS = DPTEXT.
ENDFORM.
* Lesen der Herstellerteilenummer *
FORM LESEN_HTN.
SELECT SINGLE MFRPN FROM MARA
INTO (AM07M-MFRPN) WHERE MATNR = MSEG-EMATN.
ENDFORM.
INCLUDE /SMB40/M07DRMBE.
*-------------Bestellung lesen-----------------------------------------*
FORM BESTELLUNG_LESEN."ORDER READING
DATA: NAME1 LIKE ADDR1_VAL-NAME1.
DATA: OLD_LIFNR LIKE EKKO-LIFNR.
CLEAR AM07M-NAME1.
CLEAR AM07M-NAME2.
IF EKKO-EBELN NE MSEG-EBELN.
SELECT SINGLE * FROM EKKO WHERE EBELN = MSEG-EBELN.
ENDIF.
SELECT SINGLE * FROM EKPO WHERE EBELN = MSEG-EBELN
AND EBELP = MSEG-EBELP.
* Purchase order history because of XBLNR read, since from MKPF can
*deviate
SELECT SINGLE * FROM EKBE WHERE EBELN = MSEG-EBELN
AND EBELP = MSEG-EBELP
AND VGABE = '1'
AND GJAHR = MSEG-MJAHR
AND BELNR = MSEG-MBLNR
AND BUZEI = MSEG-ZEILE.
IF NOT SY-SUBRC IS INITIAL.
CLEAR EKBE.
ELSE.
IF NOT EKBE-XBLNR IS INITIAL.
MKPF-XBLNR = EKBE-XBLNR.
ENDIF.
ENDIF.
CALL FUNCTION 'MM_ADDRESS_GET'
EXPORTING I_EKKO = EKKO
IMPORTING E_NAME1 = NAME1
EXCEPTIONS OTHERS = 1.
AM07M-NAME1 = NAME1.
IF NOT EKKO-LLIEF IS INITIAL.
OLD_LIFNR = EKKO-LIFNR.
EKKO-LIFNR = EKKO-LLIEF.
CALL FUNCTION 'MM_ADDRESS_GET'
EXPORTING I_EKKO = EKKO
IMPORTING E_NAME1 = NAME1
EXCEPTIONS OTHERS = 1.
AM07M-NAME2 = NAME1.
EKKO-LIFNR = OLD_LIFNR.
ENDIF.
XPSTY = EKPO-KNTTP.
CASE XPSTY.
WHEN B.
XPSTY = XKDE.
WHEN D.
XPSTY = XKDE.
WHEN G.
XPSTY = XPROJN.
WHEN O.
XPSTY = XPROJN.
WHEN Q.
XPSTY = XPROJN.
ENDCASE.
ENDFORM.
*----------Bestelltext lesen, wenn Matnr. = 0--------------------------*
FORM BESTELLTEXT_LESEN.
CLEAR: THEADER,
THEAD,
DTEXT.
REFRESH
DTEXT.
THEADER-TDID = 'F01 '.
THEADER-TDSPRAS = EKKO-SPRAS.
THEADER-TDNAME(10) = MSEG-EBELN.
THEADER-TDNAME+10(5) = MSEG-EBELP.
THEADER-TDOBJECT = 'EKPO '.
CALL FUNCTION 'READ_TEXT'
EXPORTING ID = THEADER-TDID
LANGUAGE = THEADER-TDSPRAS
NAME = THEADER-TDNAME
OBJECT = THEADER-TDOBJECT
IMPORTING HEADER = THEAD
TABLES LINES = DTEXT
EXCEPTIONS ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5.
ENDFORM.
*------------Bestellkopf lesen für WE-Version 2.-----------------------*
FORM BESTELLKOPF_LESEN.
CLEAR: THEADER,
THEAD,
DKTEXT.
REFRESH:
DKTEXT.
THEADER-TDID = 'F01 '.
THEADER-TDSPRAS = EKKO-SPRAS.
THEADER-TDNAME(10) = MSEG-EBELN.
THEADER-TDOBJECT = 'EKKO '.
CALL FUNCTION 'READ_TEXT'
EXPORTING ID = THEADER-TDID
LANGUAGE = THEADER-TDSPRAS
NAME = THEADER-TDNAME
OBJECT = THEADER-TDOBJECT
IMPORTING HEADER = THEAD
TABLES LINES = DKTEXT
EXCEPTIONS ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5.
ENDFORM.
INCLUDE /SMB40/M07DRMFA.
*------ Auftragskopf lesen --------------------------------------------*
FORM AUFTRAG_LESEN.
SELECT SINGLE * FROM AFKO WHERE AUFNR = MSEG-AUFNR.
IF MSEG-MATNR IS INITIAL.
SELECT SINGLE * FROM AUFK WHERE AUFNR = MSEG-AUFNR.
IF NOT SY-SUBRC IS INITIAL.
MESSAGE E001 WITH 'AUFK' MSEG-AUFNR.
ELSE.
MABDR-MAKTX = AUFK-KTEXT.
ENDIF.
ENDIF.
ENDFORM.
INCLUDE /SMB40/M07DRKON.
FORM KONTIERUNG_LESEN.
REFRESH XEKKN. CLEAR XEKKN.
SELECT * FROM EKKN WHERE EBELN = EKPO-EBELN
AND EBELP = EKPO-EBELP.
MOVE-CORRESPONDING EKKN TO XEKKN.
APPEND XEKKN.
* x_kont = x.
ENDSELECT.
DESCRIBE TABLE XEKKN LINES INDEX_Z.
IF INDEX_Z GT 1.
X_KONT = X.
ELSE.
X_KONT1 = X.
ENDIF.
ENDFORM.
* Network plan process determine.
FORM NW_VORGANG_LESEN USING F_AUFPL F_APLZL.
CALL FUNCTION 'READ_NETWORK_NPLNR_VORNR'
EXPORTING
APLZL = F_APLZL
AUFPL = F_AUFPL
IMPORTING
VORNR = N_VORNR
EXCEPTIONS
NOT_FOUND = 01.
ENDFORM.
* FORM PSP_CONVERT *
* Konvertierung des internen Felds PS_PSP_PNR zur Ausgabe *
FORM PSP_CONVERT USING PSPNR LIKE MSEG-PS_PSP_PNR.
CALL FUNCTION 'CJPN_INTERN_TO_EXTERN_CONV'
EXPORTING
INT_NUM = PSPNR
IMPORTING
EXT_NUM = AM07M-KONTIERUNG.
ENDFORM.
INCLUDE /SMB40/M07DRF01.
FORM WF01_DRUCK.
CALL FUNCTION 'START_FORM'
EXPORTING FORM = TNAPR-FONAM
LANGUAGE = LANGUAGE.
BELPOS-MBLNR = MKPF-MBLNR.
BELPOS-ZEILE = MSEG-ZEILE.
CONDENSE BELPOS NO-GAPS.
AM07M-BELPOS = BELPOS.
IF T156-SHKZG = H.
AM07M-HDLNE = TEXT-020.
ELSE.
AM07M-HDLNE = TEXT-010.
ENDIF.
IF NOT T159P-BACOD IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'W1BACOKOPF'.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'W1KOPF'.
ENDIF.
IF XPSTY IS INITIAL.
IF MSEG-XBLVS IS INITIAL.
PERFORM WF1_LAGERMATERIAL. "Lagermaterial
ELSE.
PERFORM WF1_LVSMATERIAL. "LVS-Material
ENDIF.
ELSE.
PERFORM WF1_VERBRAUCHSMATERIAL.
ENDIF.
CALL FUNCTION 'END_FORM'.
PERFORM MKTO_DRUCK.
ENDFORM.
*------------ Drucken Lagermaterial ---------------------------------*
FORM WF1_LAGERMATERIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'W1LGMAT'.
IF T156-SHKZG = H AND
NOT MSEG-GRUND IS INITIAL.
SELECT SINGLE * FROM T157E WHERE BWART = MSEG-BWART
AND GRUND = MSEG-GRUND
AND SPRAS = LANGUAGE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'RUELGGRUND'.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'LGAUSST'.
ENDFORM.
FORM WF1_LVSMATERIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'W1LVSMAT'.
IF T156-SHKZG = H AND
NOT MSEG-GRUND IS INITIAL.
SELECT SINGLE * FROM T157E WHERE BWART = MSEG-BWART
AND GRUND = MSEG-GRUND
AND SPRAS = LANGUAGE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'RUELVSGRUND'.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'LVSAUSST'.
ENDFORM.
*-------------Drucken Verbrauchsmaterial------------------------------*
FORM WF1_VERBRAUCHSMATERIAL.
CASE XPSTY.
WHEN XKDANR. "Kundenauftrag
MOVE SPACE TO KUNDE.
CLEAR AM07M-KOTXT.
AM07M-KOTXT = TEXT-030.
KUNDE-KDAUF = MSEG-KDAUF.
KUNDE-KDPOS = MSEG-KDPOS.
KUNDE-KDEIN = MSEG-KDEIN.
MOVE SPACE TO AM07M-KONTIERUNG.
CONDENSE KUNDE NO-GAPS.
AM07M-KONTIERUNG = KUNDE.
WHEN XANLAGE. "Anlage
MOVE SPACE TO ANLAGE.
CLEAR AM07M-KOTXT.
AM07M-KOTXT = TEXT-040.
ANLAGE-ANLN1 = MSEG-ANLN1.
ANLAGE-ANLN2 = MSEG-ANLN2.
MOVE SPACE TO AM07M-KONTIERUNG.
CONDENSE ANLAGE NO-GAPS.
AM07M-KONTIERUNG = ANLAGE.
WHEN XKOSTL. "Kostenstelle
CLEAR AM07M-KOTXT.
AM07M-KOTXT = TEXT-050.
AM07M-KONTIERUNG = MSEG-KOSTL.
WHEN XPROJN. "Projekt/Netzplan
CLEAR AM07M-KOTXT.
IF MSEG-NPLNR IS INITIAL.
AM07M-KOTXT = TEXT-060.
PERFORM PSP_CONVERT USING MSEG-PS_PSP_PNR.
ELSE.
AM07M-KOTXT = TEXT-061.
AM07M-KONTIERUNG = MSEG-NPLNR.
PERFORM NW_VORGANG_LESEN USING MSEG-AUFPL MSEG-APLZL.
IF NOT N_VORNR IS INITIAL.
MOVE '/' TO AM07M-KONTIERUNG+12.
MOVE N_VORNR TO AM07M-KONTIERUNG+13.
ENDIF.
ENDIF.
ENDCASE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'W1VERBRMAT'.
IF T156-SHKZG = H AND
NOT MSEG-GRUND IS INITIAL.
SELECT SINGLE * FROM T157E WHERE BWART = MSEG-BWART
AND GRUND = MSEG-GRUND
AND SPRAS = LANGUAGE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'RUELVERBRGRUND'.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'VERBRAUSST'.
ENDFORM.
INCLUDE /SMB40/M07DRF02.
FORM WF02_DRUCK.
T001W-WERKS = R_WERKS.
T001W-NAME1 = R_NAME1.
CALL FUNCTION 'START_FORM'
EXPORTING FORM = TNAPR-FONAM
LANGUAGE = LANGUAGE.
PERFORM PRUEFTEXT_LESEN.
IF T156-SHKZG = 'H'. "Kennzeichen Haben ?
AM07M-HDLNE = TEXT-020.
ELSE.
AM07M-HDLNE = TEXT-010.
ENDIF.
IF NOT T159P-BACOD IS INITIAL.
BELPOS-MBLNR = MKPF-MBLNR.
BELPOS-ZEILE = MSEG-ZEILE.
CONDENSE BELPOS NO-GAPS.
AM07M-BELPOS = BELPOS.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'WE2BACOKOPF'.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'WE2KOPF'.
ENDIF.
IF XPSTY IS INITIAL. "Lagermaterial ?
PERFORM W2_LAGERMATERIAL.
ELSE.
PERFORM W2_VERBRAUCHSMATERIAL.
ENDIF.
CALL FUNCTION 'END_FORM'.
PERFORM MKTO_DRUCK.
ENDFORM.
*-------------- Lagermaterial WE-Version 2 ---------------------------*
FORM WF2_LAGERMATERIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'WE2LGMAT'.
IF T156-SHKZG = H AND
NOT MSEG-GRUND IS INITIAL.
SELECT SINGLE * FROM T157E WHERE BWART = MSEG-BWART
AND GRUND = MSEG-GRUND
AND SPRAS = LANGUAGE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'RUELGGRUND'.
ENDIF.
THEAD-TDID = THEADER-TDID.
THEAD-TDNAME = THEADER-TDNAME.
THEAD-TDOBJECT = THEADER-TDOBJECT.
THEAD-TDSPRAS = THEADER-TDSPRAS.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'PRTXTLGMAT'.
ENDFORM.
*------------ Verbrauchsmaterial WE-Version 2 ----------------------*
FORM WF2_VERBRAUCHSMATERIAL.
CASE XPSTY.
WHEN XKDANR.
MOVE SPACE TO KUNDE.
CLEAR AM07M-KOTXT.
AM07M-KOTXT = TEXT-030.
KUNDE-KDAUF = MSEG-KDAUF.
KUNDE-KDPOS = MSEG-KDPOS.
KUNDE-KDEIN = MSEG-KDEIN.
MOVE SPACE TO AM07M-KONTIERUNG.
CONDENSE KUNDE NO-GAPS.
AM07M-KONTIERUNG = KUNDE.
WHEN XANLAGE.
MOVE SPACE TO ANLAGE.
CLEAR AM07M-KOTXT.
AM07M-KOTXT = TEXT-040.
ANLAGE-ANLN1 = MSEG-ANLN1.
ANLAGE-ANLN2 = MSEG-ANLN2.
MOVE SPACE TO AM07M-KONTIERUNG.
CONDENSE ANLAGE NO-GAPS.
AM07M-KONTIERUNG = ANLAGE.
WHEN XKOSTL.
CLEAR AM07M-KOTXT.
AM07M-KOTXT = TEXT-050.
AM07M-KONTIERUNG = MSEG-KOSTL.
WHEN XPROJN.
CLEAR AM07M-KOTXT.
IF MSEG-NPLNR IS INITIAL.
AM07M-KOTXT = TEXT-060.
PERFORM PSP_CONVERT USING MSEG-PS_PSP_PNR.
ELSE.
AM07M-KOTXT = TEXT-061.
AM07M-KONTIERUNG = MSEG-NPLNR.
PERFORM NW_VORGANG_LESEN USING MSEG-AUFPL MSEG-APLZL.
IF NOT N_VORNR IS INITIAL.
MOVE '/' TO AM07M-KONTIERUNG+12.
MOVE N_VORNR TO AM07M-KONTIERUNG+13.
ENDIF.
ENDIF.
ENDCASE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'WE2VERBRMAT'.
IF T156-SHKZG = H AND
NOT MSEG-GRUND IS INITIAL.
SELECT SINGLE * FROM T157E WHERE BWART = MSEG-BWART
AND GRUND = MSEG-GRUND
AND SPRAS = LANGUAGE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'RUEVERBRGRUND'.
ENDIF.
THEAD-TDID = THEADER-TDID.
THEAD-TDNAME = THEADER-TDNAME.
THEAD-TDOBJECT = THEADER-TDOBJECT.
THEAD-TDSPRAS = THEADER-TDSPRAS.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'PRTXTVERBRMAT'.
ENDFORM.
INCLUDE /SMB40/M07DRE01.
FORM WE01_DRUCK.
T001W-WERKS = R_WERKS.
T001W-NAME1 = R_NAME1.
ENDFORM.
*------------ Drucken Lagermaterial ---------------------------------*
FORM W1_LAGERMATERIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'W1LGMAT'.
IF T156-SHKZG = H AND
NOT MSEG-GRUND IS INITIAL.
SELECT SINGLE * FROM T157E WHERE BWART = MSEG-BWART
AND GRUND = MSEG-GRUND
AND SPRAS = LANGUAGE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'RUELGGRUND'.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'LGAUSST'.
ENDFORM.
FORM W1_LVSMATERIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'W1LVSMAT'.
IF T156-SHKZG = H AND
NOT MSEG-GRUND IS INITIAL.
SELECT SINGLE * FROM T157E WHERE BWART = MSEG-BWART
AND GRUND = MSEG-GRUND
AND SPRAS = LANGUAGE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'RUELVSGRUND'.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'LVSAUSST'.
ENDFORM.
*-------------Drucken Verbrauchsmaterial------------------------------*
FORM W1_VERBRAUCHSMATERIAL.
CLEAR: AM07M-KOTXT, AM07M-KONTIERUNG.
CASE XPSTY.
WHEN XFERT. "Fertigungsauftrag
AM07M-KOTXT = TEXT-062.
IF X_KONT1 IS INITIAL.
AM07M-KONTIERUNG = MSEG-AUFNR.
ELSE.
AM07M-KONTIERUNG = EKKN-AUFNR.
ENDIF.
WHEN XKDE. "Kundeneinzelbest.
MOVE SPACE TO KUNDE.
AM07M-KOTXT = TEXT-030.
IF X_KONT1 IS INITIAL.
KUNDE-KDAUF = MSEG-KDAUF.
KUNDE-KDPOS = MSEG-KDPOS.
ELSE.
KUNDE-KDAUF = EKKN-VBELN.
KUNDE-KDPOS = EKKN-VBELP.
ENDIF.
MOVE SPACE TO AM07M-KONTIERUNG.
CONDENSE KUNDE NO-GAPS.
AM07M-KONTIERUNG = KUNDE.
WHEN XKDANR. "Kundenauftrag
MOVE SPACE TO KUNDE.
AM07M-KOTXT = TEXT-030.
IF X_KONT1 IS INITIAL.
KUNDE-KDAUF = MSEG-KDAUF.
KUNDE-KDPOS = MSEG-KDPOS.
KUNDE-KDEIN = MSEG-KDEIN.
ELSE.
KUNDE-KDAUF = EKKN-VBELN.
KUNDE-KDPOS = EKKN-VBELP.
KUNDE-KDEIN = EKKN-VETEN.
ENDIF.
MOVE SPACE TO AM07M-KONTIERUNG.
CONDENSE KUNDE NO-GAPS.
AM07M-KONTIERUNG = KUNDE.
WHEN XANLAGE. "Anlage
MOVE SPACE TO ANLAGE.
AM07M-KOTXT = TEXT-040.
IF X_KONT1 IS INITIAL.
ANLAGE-ANLN1 = MSEG-ANLN1.
ANLAGE-ANLN2 = MSEG-ANLN2.
ELSE.
ANLAGE-ANLN1 = EKKN-ANLN1.
ANLAGE-ANLN2 = EKKN-ANLN2.
ENDIF.
MOVE SPACE TO AM07M-KONTIERUNG.
CONDENSE ANLAGE NO-GAPS.
AM07M-KONTIERUNG = ANLAGE.
WHEN XKOSTL. "Kostenstelle
AM07M-KOTXT = TEXT-050.
IF X_KONT1 IS INITIAL.
AM07M-KONTIERUNG = MSEG-KOSTL.
ELSE.
AM07M-KONTIERUNG = EKKN-KOSTL.
ENDIF.
WHEN XPROJN. "Projekt/Netzplan
IF X_KONT1 IS INITIAL.
IF MSEG-NPLNR IS INITIAL.
AM07M-KOTXT = TEXT-060.
PERFORM PSP_CONVERT USING MSEG-PS_PSP_PNR.
ELSE.
AM07M-KOTXT = TEXT-061.
AM07M-KONTIERUNG = MSEG-NPLNR.
PERFORM NW_VORGANG_LESEN USING MSEG-AUFPL MSEG-APLZL.
IF NOT N_VORNR IS INITIAL.
MOVE '/' TO AM07M-KONTIERUNG+12.
MOVE N_VORNR TO AM07M-KONTIERUNG+13.
ENDIF.
ENDIF.
ELSE.
IF EKKN-NPLNR IS INITIAL.
AM07M-KOTXT = TEXT-060.
PERFORM PSP_CONVERT USING EKKN-PS_PSP_PNR.
ELSE.
AM07M-KOTXT = TEXT-061.
AM07M-KONTIERUNG = EKKN-NPLNR.
PERFORM NW_VORGANG_LESEN USING EKKN-AUFPL EKKN-APLZL.
IF NOT N_VORNR IS INITIAL.
MOVE '/' TO AM07M-KONTIERUNG+12.
MOVE N_VORNR TO AM07M-KONTIERUNG+13.
ENDIF.
ENDIF.
ENDIF.
ENDCASE.
CLEAR X_KONT1.
* User-Exit über Erweiterung MBCF0005
CALL CUSTOMER-FUNCTION '001'
EXPORTING
I_MKPF = MKPF
I_MSEG = MSEG
I_EKKO = EKKO
I_EKPO = EKPO
I_NAST = NAST
I_TNAPR = TNAPR
TABLES
I_EKKN = XEKKN
CHANGING
C_AM07M = AM07M
EXCEPTIONS
OTHERS = 0.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'W1VERBRMAT'.
IF T156-SHKZG = H AND
NOT MSEG-GRUND IS INITIAL.
SELECT SINGLE * FROM T157E WHERE BWART = MSEG-BWART
AND GRUND = MSEG-GRUND
AND SPRAS = LANGUAGE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'RUELVERBRGRUND'.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING ELEMENT = 'VERBRAUSST'.
ENDFORM.
INCLUDE /SMB40/M07DRE02.
* FORM WE02_DRUCK *
FORM WE02_DRUCK.
T001W-WERKS = R_WERKS.
T001W-NAME1 = R_NAME1.
CALL FUNCTION 'START_FORM'
EXPORTING
FORM = TNAPR-FONAM
LANGUAGE = LANGUAGE.
PERFORM PRUEFTEXT_LESEN.
IF NOT MSEG-VFDAT IS INITIAL.
AM07M-MHTXT = TEXT-105.
ENDIF.
IF NOT AM07M-MHDAT IS INITIAL.
AM07M-MHZTX = TEXT-106.
ENDIF.
IF EKKO-BSART = 'UB'.
AM07M-LITXT = TEXT-101.
AM07M-LIBZG = EKKO-RESWK.
ELSE.
AM07M-LITXT = TEXT-100.
AM07M-LIBZG = EKKO-LIFNR.
IF NOT EKKO-LLIEF IS INITIAL.
AM07M-LIBZ2 = EKKO-LLIEF.
ELSE.
AM07M-LIBZ2 = EKKO-LIFNR.
ENDIF.
ENDIF.
IF T156-SHKZG = 'H'. "Kennzeichen Haben ?
AM07M-HDLNE = TEXT-020.
ELSE.
AM07M-HDLNE = TEXT-010.
ENDIF.
IF NOT T159P-BACOD IS INITIAL.
BELPOS-MBLNR = MKPF-MBLNR.
BELPOS-ZEILE = MSEG-ZEILE.
CONDENSE BELPOS NO-GAPS.
AM07M-BELPOS = BELPOS.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE2BACOKOPF'.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE2KOPF'.
ENDIF.
IF XPSTY IS INITIAL. "Lagermaterial ?
* User-Exit über Erweiterung MBCF0005
CALL CUSTOMER-FUNCTION '001'
EXPORTING
I_MKPF = MKPF
I_MSEG = MSEG
I_EKKO = EKKO
I_EKPO = EKPO
I_NAST = NAST
I_TNAPR = TNAPR
TABLES
I_EKKN = XEKKN
CHANGING
C_AM07M = AM07M
EXCEPTIONS
OTHERS = 0.
IF MSEG-XBLVS IS INITIAL.
PERFORM W2_LAGERMATERIAL. "Lagermaterial
ELSE.
PERFORM W2_LVSMATERIAL. "LVS-Material
ENDIF.
ELSE.
PERFORM W2_VERBRAUCHSMATERIAL.
ENDIF.
CALL FUNCTION 'END_FORM'.
PERFORM MKTO_DRUCK.
ENDFORM.
*-------------- Lagermaterial WE-Version 2 ---------------------------*
FORM W2_LAGERMATERIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE2LGMAT'.
IF T156-SHKZG = H AND
NOT MSEG-GRUND IS INITIAL.
SELECT SINGLE * FROM T157E WHERE BWART = MSEG-BWART
AND GRUND = MSEG-GRUND
AND SPRAS = LANGUAGE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'RUELGGRUND'.
ENDIF.
THEAD-TDID = THEADER-TDID.
THEAD-TDNAME = THEADER-TDNAME.
THEAD-TDOBJECT = THEADER-TDOBJECT.
THEAD-TDSPRAS = THEADER-TDSPRAS.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'PRTXTLGMAT'.
ENDFORM.
*-------------- LVS-Daten WE-Version 2 ---------------------------*
FORM W2_LVSMATERIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'W1LVSMAT'.
IF T156-SHKZG = H AND
NOT MSEG-GRUND IS INITIAL.
SELECT SINGLE * FROM T157E WHERE BWART = MSEG-BWART
AND GRUND = MSEG-GRUND
AND SPRAS = LANGUAGE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'RUELVSGRUND'.
ENDIF.
THEAD-TDID = THEADER-TDID.
THEAD-TDNAME = THEADER-TDNAME.
THEAD-TDOBJECT = THEADER-TDOBJECT.
THEAD-TDSPRAS = THEADER-TDSPRAS.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'PRTXTLVSMAT'.
ENDFORM.
*------------ Verbrauchsmaterial WE-Version 2 ----------------------*
FORM W2_VERBRAUCHSMATERIAL.
CLEAR: AM07M-KOTXT, AM07M-KONTIERUNG.
CASE XPSTY.
WHEN XFERT. "Fertigungsauftrag
AM07M-KOTXT = TEXT-062.
IF X_KONT1 IS INITIAL.
AM07M-KONTIERUNG = MSEG-AUFNR.
ELSE.
AM07M-KONTIERUNG = EKKN-AUFNR.
ENDIF.
WHEN XKDE.
MOVE SPACE TO KUNDE.
AM07M-KOTXT = TEXT-030.
IF X_KONT1 IS INITIAL.
KUNDE-KDAUF = MSEG-KDAUF.
KUNDE-KDPOS = MSEG-KDPOS.
ELSE.
KUNDE-KDAUF = EKKN-VBELN.
KUNDE-KDPOS = EKKN-VBELP.
ENDIF.
MOVE SPACE TO AM07M-KONTIERUNG.
CONDENSE KUNDE NO-GAPS.
AM07M-KONTIERUNG = KUNDE.
WHEN XKDANR.
MOVE SPACE TO KUNDE.
AM07M-KOTXT = TEXT-030.
IF X_KONT1 IS INITIAL.
KUNDE-KDAUF = MSEG-KDAUF.
KUNDE-KDPOS = MSEG-KDPOS.
KUNDE-KDEIN = MSEG-KDEIN.
ELSE.
KUNDE-KDAUF = EKKN-VBELN.
KUNDE-KDPOS = EKKN-VBELP.
KUNDE-KDEIN = EKKN-VETEN.
ENDIF.
MOVE SPACE TO AM07M-KONTIERUNG.
CONDENSE KUNDE NO-GAPS.
AM07M-KONTIERUNG = KUNDE.
WHEN XANLAGE.
MOVE SPACE TO ANLAGE.
AM07M-KOTXT = TEXT-040.
IF X_KONT1 IS INITIAL.
ANLAGE-ANLN1 = MSEG-ANLN1.
ANLAGE-ANLN2 = MSEG-ANLN2.
ELSE.
ANLAGE-ANLN1 = EKKN-ANLN1.
ANLAGE-ANLN2 = EKKN-ANLN2.
ENDIF.
MOVE SPACE TO AM07M-KONTIERUNG.
CONDENSE ANLAGE NO-GAPS.
AM07M-KONTIERUNG = ANLAGE.
WHEN XKOSTL.
AM07M-KOTXT = TEXT-050.
IF X_KONT1 IS INITIAL.
AM07M-KONTIERUNG = MSEG-KOSTL.
ELSE.
AM07M-KONTIERUNG = EKKN-KOSTL.
ENDIF.
WHEN XPROJN.
IF X_KONT1 IS INITIAL.
IF MSEG-NPLNR IS INITIAL.
AM07M-KOTXT = TEXT-060.
PERFORM PSP_CONVERT USING MSEG-PS_PSP_PNR.
ELSE.
AM07M-KOTXT = TEXT-061.
AM07M-KONTIERUNG = MSEG-NPLNR.
PERFORM NW_VORGANG_LESEN USING MSEG-AUFPL MSEG-APLZL.
IF NOT N_VORNR IS INITIAL.
MOVE '/' TO AM07M-KONTIERUNG+12.
MOVE N_VORNR TO AM07M-KONTIERUNG+13.
ENDIF.
ENDIF.
ELSE.
IF EKKN-NPLNR IS INITIAL.
AM07M-KOTXT = TEXT-060.
PERFORM PSP_CONVERT USING EKKN-PS_PSP_PNR.
ELSE.
AM07M-KOTXT = TEXT-061.
AM07M-KONTIERUNG = EKKN-NPLNR.
PERFORM NW_VORGANG_LESEN USING EKKN-AUFPL EKKN-APLZL.
IF NOT N_VORNR IS INITIAL.
MOVE '/' TO AM07M-KONTIERUNG+12.
MOVE N_VORNR TO AM07M-KONTIERUNG+13.
ENDIF.
ENDIF.
ENDIF.
ENDCASE.
CLEAR X_KONT1.
* User-Exit über Erweiterung MBCF0005
CALL CUSTOMER-FUNCTION '001'
EXPORTING
I_MKPF = MKPF
I_MSEG = MSEG
I_EKKO = EKKO
I_EKPO = EKPO
I_NAST = NAST
I_TNAPR = TNAPR
TABLES
I_EKKN = XEKKN
CHANGING
C_AM07M = AM07M
EXCEPTIONS
OTHERS = 0.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE2VERBRMAT'.
IF T156-SHKZG = H AND
NOT MSEG-GRUND IS INITIAL.
SELECT SINGLE * FROM T157E WHERE BWART = MSEG-BWART
AND GRUND = MSEG-GRUND
AND SPRAS = LANGUAGE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'RUEVERBRGRUND'.
ENDIF.
THEAD-TDID = THEADER-TDID.
THEAD-TDNAME = THEADER-TDNAME.
THEAD-TDOBJECT = THEADER-TDOBJECT.
THEAD-TDSPRAS = THEADER-TDSPRAS.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'PRTXTVERBRMAT'.
ENDFORM.
INCLUDE /SMB40/M07DRE03.
* FORM WE03_AUSGABE *
FORM WE03_AUSGABE using lgortsplit.
*----------------Drucken WE-Version 3 Überschrift---------------------*
if lgortsplit is initial.
ON CHANGE OF MKPF-MBLNR OR MSEG-EBELN OR MSEG-BWART
OR NAST-KSCHL OR MSEG-WERKS.
CLEAR XKOPFDR.
endon.
else.
ON CHANGE OF MKPF-MBLNR OR MSEG-EBELN OR MSEG-BWART
OR NAST-KSCHL OR MSEG-WERKS
OR MSEG-LGORT.
CLEAR XKOPFDR.
endon.
endif.
IF XKOPFDR IS INITIAL.
XKOPFDR = X.
IF NEW_PAGE = X.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
COMMAND = 'NEW-PAGE'.
ENDIF.
IF EKKO-BSART = 'UB'.
AM07M-LITXT = TEXT-101.
AM07M-LIBZG = EKKO-RESWK.
ELSE.
AM07M-LITXT = TEXT-100.
AM07M-LIBZG = EKKO-LIFNR.
IF NOT EKKO-LLIEF IS INITIAL.
AM07M-LIBZ2 = EKKO-LLIEF.
ELSE.
AM07M-LIBZ2 = EKKO-LIFNR.
ENDIF.
ENDIF.
IF T156-SHKZG = H.
AM07M-HDLNE = TEXT-020.
ELSE.
AM07M-HDLNE = TEXT-010.
ENDIF.
IF XPSTY IS INITIAL. "Lagermaterial ?
IF MSEG-XBLVS IS INITIAL.
IF T156-SHKZG = H AND
NOT MSEG-GRUND IS INITIAL.
IF NOT T159P-BACOD IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE3BACOKOPF'
WINDOW = 'RÜKOPF'.
NEW_PAGE = X.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE3KOPF'
WINDOW = 'RÜKOPF'.
NEW_PAGE = X.
ENDIF.
ELSE.
IF NOT T159P-BACOD IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE3BACOKOPF'
WINDOW = 'KOPF'.
NEW_PAGE = X.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE3KOPF'
WINDOW = 'KOPF'.
NEW_PAGE = X.
ENDIF.
ENDIF.
ELSE.
IF T156-SHKZG = H AND
NOT MSEG-GRUND IS INITIAL.
IF NOT T159P-BACOD IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE3BACOLVSKOPF'
WINDOW = 'RÜKOPF'.
NEW_PAGE = X.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE3LVSKOPF' "RL-Material
WINDOW = 'RÜKOPF'.
NEW_PAGE = X.
ENDIF.
ELSE.
IF NOT T159P-BACOD IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE3BACOLVSKOPF'
WINDOW = 'KOPF'.
NEW_PAGE = X.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE3LVSKOPF' "RL-Material
WINDOW = 'KOPF'.
NEW_PAGE = X.
ENDIF.
ENDIF.
ENDIF.
ELSE.
IF T156-SHKZG = H AND
NOT MSEG-GRUND IS INITIAL.
IF NOT T159P-BACOD IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE3BACOKOPF1'
WINDOW = 'RÜKOPF'.
NEW_PAGE = X.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE3KOPF1'
WINDOW = 'RÜKOPF'.
NEW_PAGE = X.
ENDIF.
ELSE.
IF NOT T159P-BACOD IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE3BACOKOPF1'
WINDOW = 'KOPF'.
NEW_PAGE = X.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE3KOPF1'
WINDOW = 'KOPF'.
NEW_PAGE = X.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
*------------- Drucken WE-Version 3 Position --------------------------*
**perform w3_lieferplan. "Routine Lieferplan
CLEAR T157E.
IF T156-SHKZG = H AND
NOT MSEG-GRUND IS INITIAL.
SELECT SINGLE * FROM T157E WHERE BWART = MSEG-BWART
AND GRUND = MSEG-GRUND
AND SPRAS = LANGUAGE.
ENDIF.
IF MSEG-EBELN IS INITIAL.
IF NOT MABDR-MAKTX IS INITIAL.
EKPO-TXZ01 = MABDR-MAKTX.
ENDIF.
ENDIF.
IF MABDR-WERTU IS INITIAL AND
MABDR-MENGU = X OR "Bestandsfuehrung = UNBW oder
XPSTY IS INITIAL. "Lagermaterial ?
* User-Exit über Erweiterung MBCF0005
CALL CUSTOMER-FUNCTION '001'
EXPORTING
I_MKPF = MKPF
I_MSEG = MSEG
I_EKKO = EKKO
I_EKPO = EKPO
I_NAST = NAST
I_TNAPR = TNAPR
TABLES
I_EKKN = XEKKN
CHANGING
C_AM07M = AM07M
EXCEPTIONS
OTHERS = 0.
IF MSEG-XBLVS IS INITIAL.
PERFORM W3_LAGERMATERIAL. "Routine Lagermaterial
ELSE.
PERFORM W3_LVSMATERIAL. "Routine RL-Material
ENDIF.
ELSE.
PERFORM W3_VERBRAUCHSMATERIAL. "Routine Verbrauchsmaterial
ENDIF.
*-------------- Drucken WE-Version 3 Seitenfuss ----------------------*
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE3FUSS'
WINDOW = 'FUSS'
FUNCTION = 'APPEND'.
ENDFORM.
*--------------Unteroutinen für Positionsdruck -----------------------*
FORM W3_LAGERMATERIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE3LGMAT'.
ENDFORM.
* FORM W3_LVSMATERIAL *
FORM W3_LVSMATERIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'WE3LVSMAT'.
ENDFORM.
* FORM W3_VERBRAUCHSMATERIAL *
FORM W3_VERBRAUCHSMATERIAL.
CLEAR: AM07M-KONTIERUNG.
AM07M-RSTYP = XPSTY.
CASE XPSTY.
WHEN XFERT. "Fertigungsauftrag
IF X_KONT1 IS INITIAL.
AM07M-KONTIERUNG = MSEG-AUFNR.
ELSE.
AM07M-KONTIERUNG = EKKN-AUFNR.
ENDIF.
WHEN XANLAGE.
MOVE SPACE TO ANLAGE.
IF X_KONT1 IS INITIAL.
ANLAGE-ANLN1 = MSEG-ANLN1.
ANLAGE-ANLN2 = MSEG-ANLN2.
ELSE.
ANLAGE-ANLN1 = EKKN-ANLN1.
ANLAGE-ANLN2 = EKKN-ANLN2.
ENDIF.
MOVE SPACE TO AM07M-KONTIERUNG.
CONDENSE ANLAGE NO-GAPS.
AM07M-KONTIERUNG = ANLAGE.
WHEN XKDE. "Kundeneinzelbestand?
MOVE SPACE TO KUNDE.
IF X_KONT1 IS INITIAL.
KUNDE-KDAUF = MSEG-KDAUF.
KUNDE-KDPOS = MSEG-KDPOS.
ELSE.
KUNDE-KDAUF = EKKN-VBELN.
KUNDE-KDPOS = EKKN-VBELP.
ENDIF.
MOVE SPACE TO AM07M-KONTIERUNG.
CONDENSE KUNDE NO-GAPS.
AM07M-KONTIERUNG = KUNDE.
WHEN XKDANR. "Kundenauftrag ?
MOVE SPACE TO KUNDE.
IF X_KONT1 IS INITIAL.
KUNDE-KDAUF = MSEG-KDAUF.
KUNDE-KDPOS = MSEG-KDPOS.
KUNDE-KDEIN = MSEG-KDEIN.
ELSE.
KUNDE-KDAUF = EKKN-VBELN.
KUNDE-KDPOS = EKKN-VBELP.
KUNDE-KDEIN = EKKN-VETEN.
ENDIF.
MOVE SPACE TO AM07M-KONTIERUNG.
CONDENSE KUNDE NO-GAPS.
AM07M-KONTIERUNG = KUNDE.
WHEN XKOSTL. "auf Kostenstelle kontiert
IF X_KONT1 IS INITIAL.
AM07M-KONTIERUNG = MSEG-KOSTL.
ELSE.
AM07M-KONTIERUNG = EKKN-KOSTL.
ENDIF.
WHEN XPROJN. "auf Projekt/Netzplan
IF X_KONT1 IS INITIAL.
IF MSEG-NPLNR IS INITIAL.
PERFORM PSP_CONVERT USING MSEG-PS_PSP_PNR.
ELSE.
AM07M-KONTIERUNG = MSEG-NPLNR.
PERFORM NW_VORGANG_LESEN USING MSEG-AUFPL MSEG-APLZL.
IF NOT N_VORNR IS INITIAL.
MOVE '/' TO AM07M-KONTIERUNG+12.
MOVE N_VORNR TO AM07M-KONTIERUNG+13.
ENDIF.
ENDIF.
ELSE.
IF EKKN-NPLNR IS INITIAL.
PERFORM PSP_CONVERT USING EKKN-PS_PSP_PNR.
ELSE.
AM07M-KONTIERUNG = EKKN-NPLNR.
PERFORM NW_VORGANG_LESEN USING EKKN-AUFPL EKKN-APLZL.
IF NOT N_VORNR IS INITIAL.
-
hallow
hi doing a smart form and in the print preview i see my page and its o.k. the problem is when i send the page to the printer noting is happen .
when i send from my computer a word document its working what is the problem can be .
i use a report program that call to smart function.
thankesHi antonio,
do you have set the CONTROL_PARAMETERS?
i do it like this:
CLEAR: CONTROL_PARAMETERS.
CONTROL_PARAMETERS-NO_DIALOG = 'X'.
it works OK.
Regards, Dieter -
Hi,
I need to send a smart form to spool only. It's not to be printed. I have set the following:
no_dialog = 'X'.
tdnoprev = 'X'.
tdnewid = 'X'
tdimmed = ''.
and it's sending the smart form to the spool and printing it at the same time.
Anybody can advised me which parameters should I set? Points will be rewarded for useful replies. Thanks.hi,
use <b>ssf_function_module_name</b>
and
<b>ws_formname</b>
the below link contains all the declarations and function module information.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/452ea204-0701-0010-cb88-8cc50fa287f0
regards,
Ashok Reddy -
Issue in External send - smart forms
hi All,
i have written a new print program for smart form and have assigned it to zoutput type.
The print preview and spool are perfectly fine.
when i give the medium as external send, it is not sending any attachmnet to the external mail id i gave.
my code is as follows.
PERFORM set_print_param USING ls_addr_key
ls_dlv-land
CHANGING ls_control_param
ls_composer_param
ls_recipient
ls_sender
ret.
FORM SET_PRINT_PARAM USING IS_ADDR_KEY LIKE ADDR_KEY
IS_DLV-LAND LIKE VBRK-LAND1
CHANGING CS_CONTROL_PARAM TYPE SSFCTRLOP
CS_COMPOSER_PARAM TYPE SSFCOMPOP
CS_RECIPIENT TYPE SWOTOBJID
CS_SENDER TYPE SWOTOBJID
RET TYPE SY-SUBRC.
DATA: LS_ITCPO TYPE ITCPO.
DATA: LF_REPID TYPE SY-REPID.
DATA: LF_DEVICE TYPE TDDEVICE.
DATA: LS_RECIPIENT TYPE SWOTOBJID.
DATA: LS_SENDER TYPE SWOTOBJID.
LF_REPID = SY-REPID.
CALL FUNCTION 'WFMC_PREPARE_SMART_FORM'
EXPORTING
PI_NAST = NAST
PI_COUNTRY = IS_DLV-LAND
PI_ADDR_KEY = IS_ADDR_KEY
PI_REPID = LF_REPID
PI_SCREEN = XSCREEN
IMPORTING
PE_RETURNCODE = RET
PE_ITCPO = LS_ITCPO
PE_DEVICE = LF_DEVICE
PE_RECIPIENT = CS_RECIPIENT
PE_SENDER = CS_SENDER.
IF RET = 0.
MOVE-CORRESPONDING LS_ITCPO TO CS_COMPOSER_PARAM.
CS_CONTROL_PARAM-NO_OPEN
CS_CONTROL_PARAM-NO_CLOSE
CS_CONTROL_PARAM-DEVICE = LF_DEVICE.
CS_CONTROL_PARAM-NO_DIALOG = 'X'.
CS_CONTROL_PARAM-PREVIEW = XSCREEN.
CS_CONTROL_PARAM-GETOTF = LS_ITCPO-TDGETOTF.
CS_CONTROL_PARAM-LANGU = NAST-SPRAS.
CS_CONTROL_PARAM-REPLANGU1
CS_CONTROL_PARAM-REPLANGU2
CS_CONTROL_PARAM-REPLANGU3
CS_CONTROL_PARAM-STARTPAGE
ENDIF.
ENDFORM.
after this i am calling smart form with all the required parameters.
CALL FUNCTION gv_function
EXPORTING
control_parameters = ls_control_param
output_options = ls_composer_param
archive_index = toa_dara
archive_parameters = arc_params
mail_recipient = ls_recipient
mail_sender = ls_sender
user_settings = space
IMPORTING
JOB_OUTPUT_INFO = ls_job_info
TABLES
zmm_purord_at = zmm_purord_at
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
i am not getting any mail to the desired mail id.
Any pointers to this would be highly appreciated.
Regards,
Sreekanthhi All,
i have written a new print program for smart form and have assigned it to zoutput type.
The print preview and spool are perfectly fine.
when i give the medium as external send, it is not sending any attachmnet to the external mail id i gave.
my code is as follows.
PERFORM set_print_param USING ls_addr_key
ls_dlv-land
CHANGING ls_control_param
ls_composer_param
ls_recipient
ls_sender
ret.
FORM SET_PRINT_PARAM USING IS_ADDR_KEY LIKE ADDR_KEY
IS_DLV-LAND LIKE VBRK-LAND1
CHANGING CS_CONTROL_PARAM TYPE SSFCTRLOP
CS_COMPOSER_PARAM TYPE SSFCOMPOP
CS_RECIPIENT TYPE SWOTOBJID
CS_SENDER TYPE SWOTOBJID
RET TYPE SY-SUBRC.
DATA: LS_ITCPO TYPE ITCPO.
DATA: LF_REPID TYPE SY-REPID.
DATA: LF_DEVICE TYPE TDDEVICE.
DATA: LS_RECIPIENT TYPE SWOTOBJID.
DATA: LS_SENDER TYPE SWOTOBJID.
LF_REPID = SY-REPID.
CALL FUNCTION 'WFMC_PREPARE_SMART_FORM'
EXPORTING
PI_NAST = NAST
PI_COUNTRY = IS_DLV-LAND
PI_ADDR_KEY = IS_ADDR_KEY
PI_REPID = LF_REPID
PI_SCREEN = XSCREEN
IMPORTING
PE_RETURNCODE = RET
PE_ITCPO = LS_ITCPO
PE_DEVICE = LF_DEVICE
PE_RECIPIENT = CS_RECIPIENT
PE_SENDER = CS_SENDER.
IF RET = 0.
MOVE-CORRESPONDING LS_ITCPO TO CS_COMPOSER_PARAM.
* CS_CONTROL_PARAM-NO_OPEN
* CS_CONTROL_PARAM-NO_CLOSE
CS_CONTROL_PARAM-DEVICE = LF_DEVICE.
CS_CONTROL_PARAM-NO_DIALOG = 'X'.
CS_CONTROL_PARAM-PREVIEW = XSCREEN.
CS_CONTROL_PARAM-GETOTF = LS_ITCPO-TDGETOTF.
CS_CONTROL_PARAM-LANGU = NAST-SPRAS.
* CS_CONTROL_PARAM-REPLANGU1
* CS_CONTROL_PARAM-REPLANGU2
* CS_CONTROL_PARAM-REPLANGU3
* CS_CONTROL_PARAM-STARTPAGE
ENDIF.
ENDFORM.
after this i am calling smart form with all the required parameters.
CALL FUNCTION gv_function
EXPORTING
control_parameters = ls_control_param
output_options = ls_composer_param
archive_index = toa_dara
archive_parameters = arc_params
mail_recipient = ls_recipient
mail_sender = ls_sender
user_settings = space
IMPORTING
JOB_OUTPUT_INFO = ls_job_info
TABLES
zmm_purord_at = zmm_purord_at
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
i am not getting any mail to the desired mail id.
Any pointers to this would be highly appreciated.
Regards,
Sreekanth -
hi guys,
i have a quetion for you. What ever i say you here is all about EWM 5.1(seperate instance)
i have a standard smartform /scwm/hu_shplabel.
this i should be using to create a shipping label printing (UCC).
i will tell you wht i did and wht i need.
i copied this standard to a z form and created the frame (windows i needed).
i dont know if this needs a driver program at all to call this.
to my knowledge i know that a method is assigned to this standard form and it calls it.
but most of the coding is done in the form itself using the input parameters.
i need to know
1. do we actually need a driver prog for such forms.
2. if i have to make changes do i do it in driver prog or form itself.( i can see lot of coding in the present form) , the coding is mostly object oriented.
3. i even have a bar code to print in it too.
4. few of the the date to be printed on the label has to come from R/3.
usually i knew the smart form where u write a se38 program to call the form and input the data mostly needed to print. i am new to this kind .
do let me know anything u think.
every information is helpfull
thank you
sidhi seshu
first let me thank you for the information.
standard form has a master window.
and i have to add 8 more windows.
i have come across a similar standard smart form but i came to know that it is associated with a
object and a corresponding class.
so i came to the conclusion that the present smartform might have a associated object and it is responsible of calling the form.
i may not be completely true. do tell me if i am or not.
the present smartform has some code internally and some global parameters added.
it has some input parameters added.
but the current functionality is not similar to what the standard is.
so i didnt understand if i have to code in object or in the form itself.
do let me know wht ever information you have. -
Error when exexuting a smart form from print program
Hi,
I have created a Print Program & Layout Set [Smart Form].
Now when i executed Print program it is throwing following error.
As internal table that we are passing to F.M is not having any data i have appended some data in debug mode.
After htting Print Immediaely Button Following EXIT Error is coming.
No table is currently processed, switching lines is not possible.
Message no. SSFCOMPOSER 183
Diagnosis
You tried to switch to the next table line, but currently no table is open for output.
System Response
The system issues an error message.
Procedure
This is probably an internal error. Please contact the SAP hotline and report the problem.
Can anybody solve this issue!
Thanks in advance.
Thanks,
Deep.Make sure that you have proper definations of internal table in program and smartform.
Regards,
Amey -
Need inputs : PO Smart form Bulgaria language in SRM
Hi Experts,
I need a couple of suggestions and guide lines for PO print out Smart form.
We have requirement for PO, print out should print in Bulgaria language if the PO Vendors is from Bulgaria country.
And if the vendor is other than Bulgaria country then it should print in the English.
We have already a custom smart form (English)which we have assigned it in BADI for the PO Print output BBP_OUTPUT_CHANGE_SF.
Do we have to create 2 different smart forms? One is for Bulgaria vendors and other for non Bulgaria vendors.
And Do need to assign the 2 different smart forms in BADI based up on the vendor country?
If I enter the fixed text (like labels) in Bulgarian language then it will automatically will print in Bulgarian language?
And what I have to do dynamic text (which I will read from the print program input data or data base tables) ? Is there any way for the translation for these dynamic texts?
And I tried to put some labels in Bulgarian language in the smart form, but I am not able to see in those characters in the print preview in the portal. Its showing as some junk characters asu201D#u201D. But I am able to see in Spool (GUI, SP01). Is it because of the Bulgaria Language pack is not there in my system
looking for your valuable inputs.
Thank you ,
Bharathi.Ok here´s how it works:
In standard logic the output type gets drawn in communication language of supplier.
so for a bulgarian supplier, with communication language Bulgarian the output type will get drawn in bulgarian.
This means the bulgarian form will get processed and in the form text will be drawn in bulgarian language as well if you stayed with standard logic and draw texts with NAST-SPRAS.
in your print program in the entry routine, not any entry routine but the one which is customized in TNAPR for this output type, place following coding:
if nast-spras NE 'BG'.
nast-spras = 'EN'.
endif.
that should do the whole job.
and NO you have absoluteley NO chance to handle this in the form.
If you arrived in the form you are already in a certain language and it too late to do what you want to.
Edited by: Florian Kemmer on Jul 16, 2009 3:21 PM
Edited by: Florian Kemmer on Jul 16, 2009 3:23 PM -
How to use Read_text in Smart Forms for printing Header Texts
Dear ALL,
I want to print Header Texts in SmartForms, For that
I am using T/Code VL02N .. and choosed Header ..
got this details... from Text Header.
Text Name :0080000441
Language :EN
Text ID :Z002
Text Object :VBBK.
So in Smart forms Under Template i have created a text and Program Code .
Inside that I have used this below code .
CALL FUNCTION 'READ_TEXT'
EXPORTING
*CLIENT= SY-MANDT
ID = 'Z002'
LANGUAGE = SY-LANGU
NAME = NAME
OBJECT = 'VBBK'
TABLES
LINES = IT_TLINE
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8.
IF SY-SUBRC 0.
CLEAR IT_TLINE.
ENDIF.
Kindly suggest me, Where to declare the variables and loops for using this Read_Text Syntax in Smartforms .
Response to this will be highly appreciated........
Regards ,
Vinoth.hi
good
please check this code
CONSTANTS:
*For text reading like in LCNMMFTX / FORM SET_CONTROL_TEXT
text_id like thead-tdid value 'MATK',
text_obj like thead-tdobject value 'AUFK '.
data tlines like tline occurs 0 with header line.
data tdname like thead-tdname.
data tdheader like thead.
if not it_proj-ltxsp is initial.
refresh tlines.
tdname = sy-mandt.
tdname+3 = it_proj-rsnum.
tdname+13 = it_proj-rspos.
tdname+17 = it_proj-rsart.
call function 'READ_TEXT'
exporting
id = text_id
language = it_proj-ltxsp
name = tdname
object = text_obj
importing
header = tdheader
tables
lines = tlines.
exceptions
not_found = 01.
thanks
mrutyun^ -
Send Smart Forms within emails (html) Problems with format
Dear all,
the ABAP report SF_XSF_DEMO1 is a demo report which converts a certain smart form into HTML and then sends it as an email in html format.
Sending the email is possible without any problems but I am wondering about the email format.
<a href="http://www.imgbox.de/show/img/e4QvgzsS4L.jpg" title="Bilder hochladen">This screenshot shows how the email looks like.</a>
I am not happy with the email layout as the Smart Form "SF_XSF_DEMO1" is designed in a different way.
What do I have to adapt within the report in order to send an email that really looks like the Smart Form? Or is it a customizing issue?
(I would like to avoid having to send the Smart Form as PDF attachment...)
Thanks for you help!
Kristian KindlerHi Kristian,
When ever you send a smartform output as an HTML email, the system generates automatic style sheets which are not supported in many email clients such as Outlook 2007, hence you will face a formatting issue. We faced the same issue and had do it it like this:
Build a BSP page similar to the output which you want to send as an email. Now you can use the BSP URL to send the html email using cl_bcs class.
I have documented this in my article below-
http://divulgesap.com/blog.php?p=NDA=
Hope it helps.
Regards,
Ravikiran -
In smart form while printing page no.
in smartform iam printing the page no
current page / no. of pages : sfsy-page / sfsy-formpages
if the no. of pages are more than 9 it is printing as star ( * )
if the total pages are 12
ex : 1/ * , 2 /* up to 9/* than 10 /12 , 11/12 , 12/12Refer this link
Re: Smart form to be printed 4 times
You can also print out the page number as "x of y":
&PAGE& / &SAPSCRIPT-FORMPAGES&
Message was edited by:
Judith Jessie Selvi -
Print portrait orientation smart forms zebra printer
Hello,
I have designed a label with smart forms. The dimensions are the following: width = 11 cm. Height: 15 cm. The label has been designed in portrait form but the zebra 105 SL printer print it in landscape format. Does Anybody knows how to fix this problem ?
Thank you.Hi,
You didn't check your printer settings in Printers and Faxes in control panel. It cannot happen the way you say.
Feel free to revert back.
--Ragu
Maybe you are looking for
-
Bluetooth not working in Windows 7 x64
Hi, My MBP is primarily used as a Windows 7 x64 box. Up until a couple of days ago, I've been using a bluetooth Logitech mouse and pairing with my iPhone without any problems. Two days ago, the mouse simply stopped working and I now cannot detect any
-
Itunes on ipod touch 4G says: the certificate for this server is invalid
Itune on my ipod Touch 4G says: The certificate for this server is invalid. You might be connecting to a server that is pretending to be ....
-
How to create goods receipt based invoice
i have created po and i wanted to create GR , Invoice , payments for the same. kindly tell me step by step tcodes. regards giri
-
Inserting a watermark in LiveCycle
How do I insert a watermark in liveCycle ? I shoul say I'm using the template.
-
Calendar.getTimeInMillis() . How to use it ?
Calendar car = Calendar.getInstance() Now I want it in milisecs. How ?