Sending Test Results in an E-mail

Hi - how can I end test/quiz results using Lotus Notes? I am
at a loss, because I know that Captivate works well with Outlook.
How can I make this work? And if it is not going to work with Lotus
Notes, then what do I need to do in order to send results via
email(Lotus Notes). Thanks for your help.

Hi eLeaner22,
If you can spare the time would you mind filing this as a
bug, the behavior you are experiencing is something that I have
seen occur on many occasions. You can report this issue via the
Adobe
Captivate Feature Request/Bug Report Form
The more people report issues with sending results via email
the more chance we have of getting it fixed in a future version.
Regards - Mark

Similar Messages

Is it possible to send report results as an email attachment in BW3.x ?

Hi Friends,
I have a requirement wherein I need to automate the process to run the report via Reporting Agent..and also to send the results as an e-mail attachment.
Is it possible to do so in BW 3.x..?
I was trying to see if I can run the report using the Reporting Agent Settings, using the Web Templates tab. However I did not see any follo-up actions available for Web templates, but found so for the Exceptions.
Can you please help and let us know if there is a way to do that and what options are available..?
Thank You
Sri lz70d7

3.1 version.
try to follwong links
loginto rsa1
u will see tab of REPORTING AGENT, press that tab.
u need to schedule the jobs as u schedule process chains,
select ur query, make the time arrangement, select output format,
output type i.e.
http://help.sap.com/saphelp_nw04/helpdata/en/45/67bd3cad649f5ce10000000a114084/content.htm
Reporting Agent Configuration
After the two steps configuration
1 - configure the agent settings for web templates
2 - scheduling package which is a reporting agent scheduler
In RSRAJ Starts a Reporting Agent Job
SAP show-mw the folow information...
All Reporting Agent settings processed
My Questions is ---Where the system save the query data ????
In RSRAM Reporting Agent Monitor in Schedule --> Execution Target --> i have information of aplcation Server.

Sending synchronization results by mail

Hello,
i've been asked a question and am not sure about the answer.
Is it possible to send synchronization results by mail ?
So for me it gets to :
- is it possible to get the result you see in the webtogo manager in a log file with just the result and number of recordings synchronized.
- is it possible to send the results by mail for each synchronization.
I was thinking about a job, we do synchronizations every nights, but i am really not familiar with these
Thanx for your help
Message was edited by:
tib_tibby

Hi,
if I understand your question right, you can get the information you need from MOBILEADMIN.C$SYNC_HISTORY table. I'd recommend to create some periodically executed job, store the last processed id (C$SYNC_HISTORY.SESSION_ID) in some table and look for rows with session_id value greater than the last processed one. Than if there're any new sync-rows, you can send them via email or do whatever you like...

Send test mail not working in content server 11g(UCM)

Hi all ,
I am using content server 11g and i have installed all the components required for email and also i had made all the internet configuration in (admin server -> internet configuration) according to my company mail server.
But while sending test mail from the administration panel i am getting the following error::-
Unable to send email. Could not send mail message from [email protected] with subject line: test mail. Invalid mail message: "xyz" <[email protected]> "Unable to find one or more recipients of message." Mail server responded with error message: 554 5.7.1 <[email protected]>: Sender address rejected: Access denied
the associated log file is ::
!csSMTPInvalidMessage,[email protected]!csSMTPResponseIndicatesFailure,554 5.7.1 <[email protected]>: Sender address rejected: Access denied
java.lang.Exception: !csSMTPResponseIndicatesFailure,554 5.7.1 <[email protected]>: Sender address rejected: Access denied
 at intradoc.common.SmtpClient.writeMsg(SmtpClient.java:531)
 at intradoc.common.SmtpClient.writeMultiMsg(SmtpClient.java:555)
 at intradoc.common.SmtpClient.sendMail(SmtpClient.java:337)
 at intradoc.server.InternetFunctions.sendMail(InternetFunctions.java:440)
 at intradoc.server.InternetFunctions.sendMailToEx(InternetFunctions.java:358)
 at intradoc.server.InternetFunctions.sendMailTo(InternetFunctions.java:83)
 at intradoc.server.InternetFunctions.sendMailPackage(InternetFunctions.java:719)
 at intradoc.server.InternetFunctions$1.run(InternetFunctions.java:624)
 at java.lang.Thread.run(Thread.java:662)
Please reply!!!
Edited by: user13475326 on Dec 14, 2010 2:27 AM

WHo is administering your mail server?
They have obvioulsy placed some restrictions on the server to stop it being abused.
First try using a real valid email address for the Administrator address for the network. Otherwise speak to the sys admin for your SMTP/mail infrastructure and see what needs toi be done.
Tim

Adding prompts dynamically and then send the results to users via email

Hi,
We have to schedule the reports for auto delivery to users at a specific time period. Please, tell me the mechanism to schedule them and how to assign prompt values to them. Currently, the reports are run by users by selecting prompts from the dashboard. If we schedule them, we will have to add some of these prompts dynamically and then send the results to users via email.
Thanks in advance!

Hi,
I haven't tested it myself...but may be the following steps can help you.
Fill some session variables depending on the the name of the user who logs in (this can be done easily be creating different session variables and put some executing order in it)
Then you use these session variables as default values for your prompts. So the report will be executed making use of this default values.
And by scheduling your ibot..you can send it by mail.
I don't know if it's this what you're looking for...probably you have to base your prompt values depending on the users that are selected in your ibot?
Hope it can help y ou in some way or another...
KR,
A

LSO - Correspondence Test result

Dear Experts
Could you please help in this matter.
Is there a way where HR admin can send mail to the respecitive managers about the WBT final test results of their employees using LSO correspondence. If yes, could you pls explain me as how to config this scenario.
Thanks in Advance
Selva

Hi Gautham,
Even in portal also not showing achieved percentageor percentage of pass. After attending exam, system is showing Pass percentage but not updating into system. I tried in SAP with the report TAC_PARTICIPANT_RESULTS_LSO . I am not able to see. Please help.
Regards,
Sushma

How can I send just 1 message for 2 mail accounts under mail forwarding

Hi everyone
I have a question for mail forwarding.
I have 2 inbound mail servers,4 outbound servers and many store servers.
User A set his mail forwarding address to B, and B set his mail forwarding address to A.
So 2 guys can receive each others message.
In this case, If two users have same "mailhost' value(ex, x.test.com), forwarding mail goes just once for each accounts.
If "mailhost' values , however, are different (ex, x.test.com and y.test.com - and also two mail servers connected as internal server),
forwarding mail goes 4 times for each accounts.
So sender gets 4 messages and receiver gets 5 messages.
How can I set mail server configuration to send just once not 4 times for 2 users?
Any advices would be welcomed.
Thanks
Message was edited by:
1231dugi
Message was edited by:
1231dugi

Hi,
User A set his mail forwarding address to B, and B
set his mail forwarding address to A.
So 2 guys can receive each others message.You have just created a mail loop. This is not a good thing.
Any advices would be welcomed.I would advise creating a mailing list which has both userA and userB as members, and then have emails sent to that address OR have a third account which they can both access (IMAP shared folders) and have email sent to that OR have them share each-others INBOX.
The fact that userA & B didn't get multiple copies when they were on the same mailhost is due to good luck only.
Shane.

Sending ALV result as Excel file in email and in background mode

Hello,
My need was to developp a generic program to send ALV result in a Excel file by email (as we have already a program to send any spool in PDF format).
I found package SALV_EXPORT which contains very interesting things.
I have done a program with following selection-screen parameters:
- Name of a program to call
- execution variant linked to this program
- several output options (mail, save as local file, save on application server...)
data: g_guid type guid_32.
data : l_xxml_data type xstring.
g_guid = cl_salv_export_db_storage=>create_guid( ).
export l_mode = 'M' to memory id 'ALV_EXTRACT_MODE'.
export l_guid = g_guid to memory id 'ALV_EXTRACT_GUID'.
* call the program with its variant
submit (p_prog)
using selection-set p_vari
and return.
* Get back the data
l_xxml_data = cl_salv_export_db_storage=>import_xmlstring( guid = g_guid ).
Here, we have a XML data (ALVXML or XML for Excel, i don't know) which is the ALV result with the layout applied (either the alv layout specified on selection-screen of called program or default layout).
This solution is so simple that i wonder that it's not documented (or i haven't found the documentation).
If anybody knows any problem with this solution, has anyu remarks or want to add some enhancement, don't hesitate to post..
Hope this help
Christophe

A review of comments in ALV driver code shows references to "Mendocino" which I believe is now called 'Duet". It's part of SAP and Microsoft Office integration suite:
http://www.sap.com/solutions/duet/index.epx
I have used this method of extracting ALV reports in the past but I don't think it's released for general use.
Thanks,
Abdul Rouhi
Washington, DC

Error while sending query result

Hi all,
I am working on a JDBC-XI-IDoc scenario. In my sending JDBC adapter configuration, i have given the Query SQL statement as SELECT * FROM SAP_PROMOTION and Update SQL statement as: <TEST>
But when i go to adapter monitor, i am seeing an error as follws:
Error: Sending query result failed with com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve binding for the given channelId: Binding:CID=875514bc047b3557a5b53dfb5ef4babe; - retry
last retry interval started 10:54:09 2006-05-25
length 60,000 secs
Can anybody help me how to solve this problem.
Regards,
Divija

Divija,
Am not sure if this is the exact cause for your problem, but would anyways suggest that you take a look at it,
classes12.zip is not compatible with JDK 1.4.
From the note : 831162
Oracle JDBC Driver (classes12.zip / classes12.jar) Deadlocks
Q: I have deployed the Oracle classes12.zip / classes12.jar JDBC driver as per the instructions in the XI Configuration Guide.
Unfortunately, I frequently notice hanging database connections. A thread dump taken according to the instructions in note 710154 shows one or more blocking JDBC Sender/Reciver threads and optionally that the JVM has detected a deadlock.
A: The Oracle classes12.zip / classes12.jar driver is compatible with Java 1.2 and Java 1.3 only, but not with Java 1.4. Please upgrade to a current driver (ojdbc14.jar), which does support the Java 1.4 JVM you are using.
Please make sure that you remove classes12.zip / classes12.jar from aii_af_jmsproviderlib.sda prior to adding the new driver as per the instructions in the answer to question #1 above as you will get a class name collision otherwise (all JARs from aii_af_jmsproviderlib.sda are loaded into the same class loader and the driver class name of both driver versions is the same).
Before deploying the updated driver, ensure that the new version is still compatible with your Oracle database server release. For details, please refer to the release notes provided by Oracle.
Regards,
Bhavesh

Sending sapscript form to an external mail

i need to send sapscript form to an external mail like for example a yahoo mail from SAP. i need an ABAP code that performs this function. its urgent, please

1) REPORT PROGRAM - RSTXPDFT4 ,
FIRST GENERATE SPOOL REQUEST THEN DOWNLOAD SAPSCRIPT TO PDF FILE ON LOCAL PC.
2) copy this code to send this downloaded form to external mail -
*& Report ZGILL_SENDMAIL_PDF *
REPORT ZGILL_SENDMAIL_PDF .
INCLUDE ZGILL_INCMAIL. "SEE BELOW FOR INCLUDE PROGRAM CODE.
* DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
* SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case DEFAULT '[email protected]'.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY DEFAULT 'C:TEMPSALARY_SLIP1.PDF'.
* AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
* START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
* FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
* CHECK_DOS_FORMAT =
IMPORTING
* DRIVE =
EXTENSION = extension
NAME = name
* NAME_WITH_EXT =
* PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
**********************iNCLUDE pROGRAM*********************************************
*& Include ZGILL_INCMAIL *
* Data
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
* FORM
FORM ml_customize USING objname objdesc.
*----------- Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
*--------- Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
* FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
* FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
* FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
*--------- Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
* IMPORTING
* COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
* Header Data
* Already Done Thru FM
* Main Text
* Already Done Thru FM
* Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
* Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
* Receiver List
* Already done thru fm
ENDFORM. "ml_prepare
* FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
* CONTENTS_HEX = objhex
* OBJECT_PARA =
* object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
* FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
*-------------- Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
*------------- Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
* FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
*-------- Data
DATA : pos TYPE i.
DATA : len TYPE i.
*------------ Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
***********************INCLUDE END*********************************

Coded UI - Test Results/Out - The binary files are getting copied to the TestResults/Out folder

Hi,
I am using Visual Studio 2013 for developing the Coded UI Automation Scripts.
Whenever I execute a Coded UI Automation Script, the binary files are getting copied to the TestResults/Out folder.
I do not want these binary files to be copied to OUT folder, and I have tried disabling the Deployment option under Test Settings > Deployment, but still the behavior is the same.
Could you please advice, how to disable copying binary files into the Out directory.
Thanks in Advance.
Regards,
Karthick K

Hi Karthick K,
From your description, as far as I know that when we enable Tracing and HtmlLogger for Coded UI Test and then run the coded UI test, we will get the Test Results/Out folder automatically.
So it is default that the Out folder includes some files like codeduitestproject6.dll, CodedUITestProject6.pdb etc, we could not disable copying binary files into the Out directory.
However, there have a replace workaround is I suggest you can disable Tracing and HtmlLogger for Coded UI Test. After you disable the Tracing and HtmlLogger for Coded UI Test, it will not generate the Out folder.
Similarly, it will not get the binary files.
http://blogs.msdn.com/b/visualstudioalm/archive/2012/11/08/enabling-htmllogger-in-coded-ui-test.aspx
If you still want to this feature, I suggest you could submit this feature request:
http://visualstudio.uservoice.com/forums/121579-visual-studio. The Visual Studio product team is listening to user voice there. You can send your idea there and people can vote. If
you submit this suggestion, I hope you could post that link here, I will help you vote it.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Send the result of a query by email

Hi,
I want to execute a query in a procedure and send the result in an email using the utl_smtp package. I have send a one line messages based on the result received based on a query. But I'm not sure how to send the entire result of the query as a message body. Any help is appreciated. Thanks,

Doesn't it depend on what you want to send, do you want the results as just text in the e-mail or an attachment? Do you want csv, xls, xml? Once we know what you want to send we can probably give you some guidance on how you might best create the result you want. If you're already sending an e-mail you can easily add an attachment to the e-mail which would probably be your best bet as you don't know the size of the result set (?). I reckon this will be more of an issue around how you turn your results into a format that you can send rather than how you send it.
Richard

How to get Test Results to SQL w/o Coldfusion

Is there a way to get Captivate test results (or any results)
to SQL. I was thinking of using the SCORM interface?
A simple elegant solution would be great since I want to
build it into to all my componants.
Thanks in advance,
Scott

If your organization is running Sharpoint 3.x, you can use
the sharepoint learning kit which runs off of a sql back end. This
is a SCORM 2004 compliant LMS that can be found here:
http://www.codeplex.com/SLK
If you want to do this without an LMS, you can set up your
quiz to just send the score as in this article:
http://www.adobe.com/devnet/captivate/articles/store_cpresults_print.html
You steal the idea from here, but in your javascript, you can
do a pass your variables (quiz resutls), to an asp.net page that
places them into a SQL db. I'm working on such a solution right
now. That way, you don't need an LMS and you have complete control
over how and when the results are stored.

How Can I change the Directory and Name of Coded UI Test Result html file

I'm Using Visual Studio 2013
Now I can find the Coded UI test result html file insde the following path
TestProjectFolder\TestResults\2015_01_22_05_59\In\anotherfolder\MyMachineName\UiTestActionLog.html
VS2013 enables editing the name structure of this folder only (2015_01_22_05_59). and it should contains a static name+DateTime (Using the Project TestSettings).
I need to (Programatically)
Collect all test result html files on one folder with the project name (Change the path of the test result file)
Put the testcase name on the result file name (for example : TC13505_ValidateScreenComponents_2015_01_22_05_59)
If possible,Programatically attach the html result file to the test case attachements
More Details:
I need to set a custom valus for (ResultsDirectory -
TestLogsDir -TestResultsDirectory
- TestName) on the runtime.
please if any onw know how to do the previous tasks
by code, please share your knowledge.
Regards, Ahmed Elgazar Skype:A7medelgazar

Hi AhmedElgazar,
Thank you for posting in MSND forum.
As you said that you want to collect all test result html files on one folder with the project name by programmatically way to change the path of test result file in coded UI test.
As far as I know that when we run a coded UI test every time, it is default that there will create a new folder to save the new UITestActionLog.html.
So we could not change the path of test result file and collect all test result html files on one folder in VS IDE.
At present, there have no way to collect all test result html files on one folder and change the test result file path.
In addition, I know that we can change the TestResults folder using mstest.exe in command line.
Reference:
https://social.msdn.microsoft.com/Forums/en-US/58d3d2a6-1a45-41ba-9afa-12d087c7c661/how-to-change-the-test-results-path-of-codedui?forum=vstest
If you still want to this feature, I suggest you can submit this feature request:
http://visualstudio.uservoice.com/forums/121579-visual-studio. The Visual Studio product team is listening to user voice there. You can send your idea there and people can vote. If
you submit this suggestion, I hope you could post that link here, I will help you vote it.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

HT4864 getting error when sending test message - error # 0x80004005 - both icloud accounts. Using settings from webpage

I am receiving error message in outlook when I attempt to send test message from either of my icloud account addresses - error is 0x80004005. I have setup these accounts using the settings in the instructions to manually setup an email account in Outlook. Resolution?

Change your outgoing SMTP server for you @me accout to: p06-smtp.mail.me.com

Sending Test Results in an E-mail

Similar Messages

Maybe you are looking for