Sending the smartform output to SPOOL
Hi,
How do I create a spool request with the smartform out put? I have passed the following parameters, but it still does not create a spool request.
data: W_CTRLOP TYPE SSFCTRLOP,
W_COMPOP TYPE SSFCOMPOP.
W_CTRLOP-LANGU = LS_CONTROL-LANGU.
W_CTRLOP-GETOTF = 'X'.
W_CTRLOP-NO_DIALOG = 'X'.
W_COMPOP-TDNOPREV = 'X'.
W_COMPOP-TDNOPRINT = 'X'.
W_COMPOP-TDDATASET = 'VENEVA'.
w_COMPOP-TDDEST = 'UK24'.
W_COMPOP-TDNEWID = 'X'.
W_COMPOP-XSFOUTMODE = 'S'.
Thank you,
Geetha
hi Geetha,
is there any specifice reason to passin this <b>W_COMPOP-XSFOUTMODE = 'S'</b>
pass these parameters only u will get the spool in <b>JOB_OUTPUT_INFO-SPOOLIDS</b>
W_CTRLOP-LANGU = LS_CONTROL-LANGU.
W_CTRLOP-GETOTF = 'X'.
W_CTRLOP-NO_DIALOG = 'X'.
W_COMPOP-TDNOPREV = 'X'.
W_COMPOP-TDDATASET = 'VENEVA'.
w_COMPOP-TDDEST = 'UK24'.
W_COMPOP-TDNEWID = 'X'.
Please Close this thread.. when u r problem is solved. Reward all Helpful answers
Regards
Naresh Reddy K
Similar Messages
-
Problem in sending the Smartform Output as PDF through Mail
Dear All,
I am sending the Smartform Output as an attachment by converting it into PDF. But when I am recieve this attachment I am unable to open the PDF file, it is giving error that FILE IS DAMAGED. Below is the code:
REPORT Y_SEND_MAIL2.
TABLES: vbrk, vbrp.
TYPE-POOLS: abap.
DATA: it_vbrk TYPE TABLE OF vbrk WITH HEADER LINE.
DATA: i_formname TYPE tdsfname,
i_fm_name TYPE rs38l_fnam,
it_vbak TYPE TABLE OF vbak WITH HEADER LINE,
it_ekko TYPE TABLE OF ekko WITH HEADER LINE.
DATA: is_bil_invoice TYPE lbbil_invoice,
output_options TYPE ssfcompop,
control_parameters TYPE ssfctrlop,
e_devtype TYPE rspoptype,
job_output_info TYPE ssfcrescl,
bin_file TYPE xstring,
lines TYPE TABLE OF tline WITH HEADER LINE,
doctab_archive TYPE TABLE OF docs WITH HEADER LINE,
filelength TYPE i,
bin_filesize TYPE i,
docs TYPE TABLE OF docs WITH HEADER LINE.
*"Types
TYPES: t_document_data TYPE sodocchgi1,
t_packing_list TYPE sopcklsti1,
t_attachment TYPE solisti1,
t_body_msg TYPE solisti1,
t_receivers TYPE somlreci1,
t_pdf TYPE tline.
*"Workareas
DATA :w_document_data TYPE t_document_data,
w_packing_list TYPE t_packing_list,
w_attachment TYPE t_attachment,
w_body_msg TYPE t_body_msg,
w_receivers TYPE t_receivers,
w_pdf TYPE t_pdf.
*internal tables
DATA : i_document_data TYPE STANDARD TABLE OF t_document_data,
i_packing_list TYPE STANDARD TABLE OF t_packing_list,
i_attachment TYPE STANDARD TABLE OF t_attachment,
i_body_msg TYPE STANDARD TABLE OF t_body_msg,
i_receivers TYPE STANDARD TABLE OF t_receivers,
i_pdf TYPE STANDARD TABLE OF t_pdf.
DATA: BEGIN OF line_bin,
data(1024) TYPE x,
END OF line_bin.
DATA: data_tab_bin LIKE STANDARD TABLE OF line_bin.
So please suggest a solution.
Regards,
VishalContinued:
SELECT-OPTIONS: s_vbeln FOR vbrk-vbeln,
s_fkdat FOR vbrk-fkdat OBLIGATORY DEFAULT sy-datum.
SELECT * FROM vbrk
INTO TABLE it_vbrk
WHERE fkdat IN s_fkdat
AND vbeln IN s_vbeln.
i_formname = 'Z_SD_JINDAL_INVOICE10'.
output_options-tddest = 'LP02'.
output_options-tdimmed = 'X'.
output_options-tdnewid = 'X'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = i_formname
IMPORTING
fm_name = i_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0. "checking subrc
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF. "IF sy-subrc <> 0
READ TABLE it_vbrk INDEX 1.
IF sy-subrc = 0.
is_bil_invoice-hd_gen-bil_number = it_vbrk-vbeln.
ENDIF.
control_parameters-no_dialog = 'X'.
control_parameters-getotf = 'X'.
CALL FUNCTION i_fm_name "'/1BCDWB/SF00000097'
EXPORTING
control_parameters = control_parameters
output_options = output_options
user_settings = space
is_bil_invoice = is_bil_invoice
IMPORTING
job_output_info = job_output_info
TABLES
it_vbak = it_vbak
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*FORM convert_otf_2_pdf.
CALL FUNCTION 'CONVERT_OTF_2_PDF'
* EXPORTING
* USE_OTF_MC_CMD = 'X'
* ARCHIVE_INDEX =
IMPORTING
bin_filesize = bin_filesize
TABLES
otf = job_output_info-otfdata[]
doctab_archive = docs[]
lines = lines[]
EXCEPTIONS
err_conv_not_possible = 1
err_otf_mc_noendmarker = 2
OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*ENDFORM. "convert_otf_2_pdf -
How can we send the smartform output to mail.
Dear Friends,
My query is how can we send the smart form output to mail.
In my company,payslip are given to the employee in printed format.instead of that we need to send payslip in mail.how can i do..plz help me.
[email protected]The code below demonstrates how to retrieve a spool request and email it as a PDF document. Please note to process a spool request the program can be executed in background or foreground. Because of the additional functionality to allow this to work in both background and foreground it has made it a little more confusing soyou might want to start by looking at the background only program. Also see transaction SCOT for SAPConnect administration.
*& Report ZSPOOLTOPDF2 *
*& Converts spool request into PDF document and emails it to *
*& recipicant. *
*& Execution *
*& This program can be run in background or online and a spool request *
*& will still be created *
REPORT zspooltopdf2.
PARAMETER: p_email1 LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_sender LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_delspl AS CHECKBOX,
p_online no-display.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i,
w_spool_nr like sy-spono.
%_print LIKE pri_params.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
Write statement to represent report output. Spool request is created
if write statement is executed in background. This could also be an
ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
If p_online = 'X'.
Processing performed when program calls itself when run online
gd_spool_nr = sy-spono.
EXPORT gd_spool_nr TO MEMORY ID 'SPOOLTOPDF'.
EXIT.
endif.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
ELSE.
gd_spool_nr = sy-spono.
If executed online, it submits a program to perform the write statements
instructing it to create a spool request, this could be another program
which just performs the write statements and then exports sy-spono
to memory. But in this example it calls itself passing X to parameter
p_online, which takes it down an alternative procesing path.
submit ZSPOOLTOPDF2
with p_online = 'X'
to sap-spool
spool parameters %_print
archive parameters %_print
without spool dynpro
and return.
ENDIF.
Get spool id from program called above
IMPORT gd_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
if p_delspl EQ 'X'.
PERFORM delete_spool.
endif.
IF sy-sysid = c_dev.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
FORM get_job_details *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
perform send_email using p_email2.
ENDFORM.
FORM send_email *
--> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = 'Attachname'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
using p_email
'Example .xls documnet attachment'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables it_message
it_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Regards,
Shakti Barath -
Configuration to send the smartform through fax
Hi,
I have used CONVERT_OTF_AND_FAX and SO_OBJECT_SEND FM's to send the smartform through fax.After executing SO_OBJECT_SEND function module,I am getting sy-subrc alue as 9(OBJECT_NOT_SEND).I am able to send the document through fax.But when I click on display in SOST transaction it is just printing the output of the smartform.It is not coming in PDF format.
The code looks fine.I think there is some problem with confuration settings.Is there any configuration to be done to send the smartform output through fax?
Please reply.
Regards,
HemaHi,
Actually,my requirement is to send the smartform output through email with medium 'external send'.I have done some coding for that.it is working fine and I am able to send the smartform through email and open the attachment in PDF format.
But if the email id of the recipient is not present then the smartform output has to be sent through fax with the same medium 'external send'.
So I have done some coding to send the smartform through fax when the email id is not present.
I am able to send the output of smartform through fax.But when I clicked on display in SOST transaction,it is not coming in PDF format.It is coming in RAW format.
Is it possible to send the smartform output through fax with medium 'external send'?
Regards,
Hema -
Send the Report output to email from spool
Hi All,
The following process which i am doing to send the report output(Executed in background) to my mail id.
I ran the report in Background and got the output in the spool. i opened the spool from the transaction SM37 and send the output to my external mail id via the following process
click Spool Request->forward-> send SAP data
here i am getting one POP up in there i gave my mail id and tick the check box on Express and click copy.
Now i received the output in my mail .
By doing the above process in the Quality server i am receiving the output in the mail as a PDF format that is correct.(Output is also correct).
But when i execute the same in production server i am receiving the output in the mail as HTML format. (output and format is totally wrong). I want to know why its coming as HTML format instead of PDF format.
Kindly help me regarding this.. Any configuration is there? If yes please let me know soon..
Regards,
Navaneeth...Hi,
use scon, double-click on SMTP, select internet
and compare the types of you both SAP-Systems.
Hope it helps.
Regards, Dieter -
Problem in sending the smartform as an email in a country specific language
Hi,
I am facing a problem in sending a smartform as a email for all other Languages except english and another problem is its sending the email but the output status is still in RED in the messages tab.
the program is working fine for english.
Please do find the below code using which i would be sending the smartform as an email for a PO along with the line item attachments.
Please help.
Arun.
Determine smartform function module for purchase document
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = lf_formname
IMPORTING
fm_name = lf_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
error handling
ent_retco = sy-subrc.
IF sy-subrc = 1.
MESSAGE e001(/smb40/ssfcomposer).
ENDIF.
IF sy-subrc = 2.
MESSAGE e002(/smb40/ssfcomposer) WITH tnapr-sform.
ENDIF.
PERFORM protocol_update_i.
ENDIF.
*Start of changes <Arun K Singarapu> C082493 <04/28/2008>
*for print preview
IF sy-ucomm = 'PREVOUTPUT' OR sy-ucomm = 'VIEW'.
CALL FUNCTION lf_fm_name "'/1BCDWB/SF00000197'
EXPORTING
control_parameters = wa_ctrlop
output_options = wa_compop
user_settings = 'X'
is_ekko = l_doc-xekko
is_pekko = l_doc-xpekko
is_nast = l_nast
iv_from_mem = l_from_memory
iv_druvo = iv_druvo
iv_xfz = iv_xfz
IMPORTING
job_output_info = wa_return
TABLES
it_ekpo = l_doc-xekpo[]
it_ekpa = l_doc-xekpa[]
it_pekpo = l_doc-xpekpo[]
it_eket = l_doc-xeket[]
it_tkomv = l_doc-xtkomv[]
it_ekkn = l_doc-xekkn[]
it_ekek = l_doc-xekek[]
it_komk = l_xkomk[]
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
EXIT.
ELSE.
wa_ctrlop-LANGU = nast-spras.
wa_ctrlop-getotf = 'X'.
wa_ctrlop-no_dialog = 'X'.
wa_compop-tdnoprev = 'X'.
CALL FUNCTION lf_fm_name "'/1BCDWB/SF00000197'
EXPORTING
control_parameters = wa_ctrlop
output_options = wa_compop
user_settings = 'X'
is_ekko = l_doc-xekko
is_pekko = l_doc-xpekko
is_nast = l_nast
iv_from_mem = l_from_memory
iv_druvo = iv_druvo
iv_xfz = iv_xfz
IMPORTING
job_output_info = wa_return
TABLES
it_ekpo = l_doc-xekpo[]
it_ekpa = l_doc-xekpa[]
it_pekpo = l_doc-xpekpo[]
it_eket = l_doc-xeket[]
it_tkomv = l_doc-xtkomv[]
it_ekkn = l_doc-xekkn[]
it_ekek = l_doc-xekek[]
it_komk = l_xkomk[]
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*Convert the data from OTF to PDF format
it_otf[] = wa_return-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = l_len_in
bin_file = lp_xcontent
TABLES
otf = it_otf
lines = it_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
TRY.
---------- create persistent send request ----------------------
send_request = cl_bcs=>create_persistent( ).
len = XSTRLEN( lp_xcontent ).
transform to solix tab
lt_solix =
cl_document_bcs=>xstring_to_solix(
ip_xstring = lp_xcontent ).
Create Body to the E-mail.
APPEND Text-005 TO l_text.
Attachment Name
l_ponumber = text-004.
CONCATENATE l_ponumber l_doc-xekko-ebeln INTO l_ponumber.
Subject for the E-Mail.
l_subject = text-001.
CONCATENATE l_subject l_doc-xekko-ebeln INTO l_subject.
*create document E-Mail.
CALL METHOD cl_document_bcs=>create_document
EXPORTING
i_type = 'RAW'
i_subject = l_subject
i_length = '13'
i_text = l_text
RECEIVING
result = l_email_object.
*Create PDF Document
bcs_doc = cl_document_bcs=>create_document(
i_type = 'PDF'
i_subject = l_ponumber
i_length = len
i_language = nast-spras
i_hex = lt_solix
*Type casting
obj_pdf_file ?= bcs_doc.
Add PDF document as an attachment
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_pdf_file.
get the attachments of the PO for each line item
SELECT ebeln
ebelp
FROM ekpo
INTO TABLE it_ekpo
WHERE ebeln = l_doc-xekko-ebeln.
concatenate PO and the Line Item Numebr to get the Object key
LOOP AT it_ekpo INTO wa_ekpo.
CONCATENATE wa_ekpo-ebeln wa_ekpo-ebelp INTO wa_temp-objky.
APPEND wa_temp TO it_temp.
CLEAR: wa_temp,wa_ekpo.
ENDLOOP.
*Get data from table DRAD
IF it_temp[] IS NOT INITIAL.
SELECT dokar
doknr
dokvr
doktl
objky
FROM drad
client specified
INTO TABLE it_drad
FOR ALL ENTRIES IN it_temp
WHERE mandt = sy-mandt
AND objky = it_temp-objky.
ENDIF.
IF NOT it_drad IS INITIAL.
SELECT * FROM dms_doc2loio
INTO TABLE it_dms_doc2loio
FOR ALL ENTRIES IN it_drad
WHERE dokar = 'SRM'
AND doknr = it_drad-doknr
AND dokvr = it_drad-dokvr
AND doktl = it_drad-doktl.
ENDIF.
Get the Physical object class and Object ID of the attachment
IF NOT it_dms_doc2loio IS INITIAL.
SELECT * FROM dms_ph_cd1
INTO TABLE it_dms_ph_cd1
FOR ALL ENTRIES IN it_dms_doc2loio
WHERE loio_id = it_dms_doc2loio-lo_objid.
ENDIF.
Get the file from the DMS server using the below function module.
LOOP AT it_dms_ph_cd1 INTO wa_dms_ph_cd1.
wa_object_id-class = wa_dms_ph_cd1-ph_class.
wa_object_id-objid = wa_dms_ph_cd1-phio_id.
CALL FUNCTION 'SDOK_PHIO_LOAD_CONTENT'
EXPORTING
object_id = wa_object_id
client = sy-mandt
TABLES
file_access_info = it_file_access_info
file_content_binary = it_sdokcntbin
EXCEPTIONS
not_existing = 1
not_authorized = 2
no_content = 3
bad_storage_type = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
READ TABLE it_file_access_info INTO wa_file_access_info INDEX 1.
IF wa_file_access_info-mimetype = 'application/msword'.
l_doc_type = 'DOC'.
CLEAR: a_xstring,len.
LOOP AT it_sdokcntbin INTO wa_sdokcntbin.
CONCATENATE a_xstring wa_sdokcntbin-line
INTO a_xstring IN BYTE MODE.
ENDLOOP.
len = XSTRLEN( a_xstring ).
transform to solix tab - adding additional attachments
REFRESH lt_solix.
lt_solix =
cl_document_bcs=>xstring_to_solix(
ip_xstring = a_xstring ).
CLEAR l_filename.
Get the file name
l_filename = wa_file_access_info-file_name.
bcs_doc1 = cl_document_bcs=>create_document(
i_type = l_doc_type
i_subject = l_filename
i_length = len
i_language = sy-langu
i_hex = lt_solix
*Type casting
obj_file ?= bcs_doc1.
Add Attachment as a document to the email object
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_file.
for PDF document
ELSEIF wa_file_access_info-mimetype = 'application/pdf'.
l_doc_type = 'PDF'.
file_size = wa_file_access_info-file_size.
Convert the 1022 binary data to xstring
CLEAR a_xstring.
CALL FUNCTION 'SCMS_BINARY_TO_XSTRING'
EXPORTING
input_length = file_size
IMPORTING
buffer = a_xstring
TABLES
binary_tab = it_sdokcntbin
EXCEPTIONS
failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
DATA: w_output_length TYPE i.
Convert Xstring to 255 RAW
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
buffer = a_xstring
IMPORTING
output_length = w_output_length
TABLES
binary_tab = lt_content_bin.
len = w_output_length.
CLEAR l_filename.
Get the file name
l_filename = wa_file_access_info-file_name.
bcs_doc1 = cl_document_bcs=>create_document(
i_type = l_doc_type
i_subject = l_filename
i_length = len
i_language = sy-langu
i_hex = lt_content_bin
type casting
obj_file ?= bcs_doc1.
Add Attachment as a document to the email object
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_file.
for Excel Document
ELSEIF wa_file_access_info-mimetype = 'application/msexcel'.
l_doc_type = 'XLS'.
CLEAR: a_xstring,len.
LOOP AT it_sdokcntbin INTO wa_sdokcntbin.
CONCATENATE a_xstring wa_sdokcntbin-line
INTO a_xstring IN BYTE MODE.
ENDLOOP.
len = XSTRLEN( a_xstring ).
transform to solix tab - adding additional attachments
REFRESH lt_solix.
lt_solix =
cl_document_bcs=>xstring_to_solix(
ip_xstring = a_xstring ).
CLEAR l_filename.
Get the file name
l_filename = wa_file_access_info-file_name.
bcs_doc1 = cl_document_bcs=>create_document(
i_type = l_doc_type
i_subject = l_filename
i_length = len
i_language = sy-langu
i_hex = lt_solix
*Type casting
obj_file ?= bcs_doc1.
Add Attachment as a document to the email object
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_file.
for text doxument
ELSEIF wa_file_access_info-mimetype = 'plain/text'.
l_doc_type = 'TXT'.
file_size = wa_file_access_info-file_size.
Get the file name
l_filename = wa_file_access_info-file_name.
CALL FUNCTION 'SCMS_BINARY_TO_TEXT'
EXPORTING
input_length = file_size
TABLES
binary_tab = it_sdokcntbin
text_tab = file_data
EXCEPTIONS
failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL METHOD cl_document_bcs=>create_document
EXPORTING
i_type = l_doc_type
i_subject = l_filename
i_text = file_data
RECEIVING
result = bcs_doc1.
obj_file ?= bcs_doc1.
Add Attachment as a document to the email object
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_file.
ENDIF.
CLEAR:it_file_access_info,it_sdokcntbin.
CLEAR:wa_object_id,wa_file_access_info,file_size.
ENDLOOP.
CALL METHOD send_request->set_document( l_email_object ).
*Get the address number for the vendor
SELECT SINGLE adrnr
FROM lfa1
INTO l_adrnr
WHERE lifnr = l_doc-xekko-lifnr.
MOVE l_adrnr TO l_addrno.
Get the Email Address for the vendor using address number
CALL FUNCTION 'ADDR_GET_REMOTE'
EXPORTING
addrnumber = l_addrno
TABLES
adsmtp = it_adsmtp
EXCEPTIONS
parameter_error = 1
address_not_exist = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
sender = cl_sapuser_bcs=>create( sy-uname ).
CALL METHOD send_request->set_sender
EXPORTING
i_sender = sender.
READ TABLE it_adsmtp INTO wa_adsmtp WITH KEY flg_nouse = 'X'.
IF sy-subrc = 0.
LOOP AT it_adsmtp INTO wa_adsmtp WHERE flg_nouse = 'X'.
CALL METHOD cl_cam_address_bcs=>create_internet_address
EXPORTING
i_address_string = wa_adsmtp-smtp_addr
RECEIVING
result = recipient.
CALL METHOD send_request->add_recipient
EXPORTING
i_recipient = recipient
i_express = 'X'.
ENDLOOP.
ELSE.
READ TABLE it_adsmtp INTO wa_adsmtp WITH KEY flgdefault = 'X'.
IF sy-subrc = 0.
CALL METHOD cl_cam_address_bcs=>create_internet_address
EXPORTING
i_address_string = wa_adsmtp-smtp_addr
RECEIVING
result = recipient.
CALL METHOD send_request->add_recipient
EXPORTING
i_recipient = recipient
i_express = 'X'.
ENDIF.
ENDIF.
CALL METHOD send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = l_sent_to_all ).
CATCH cx_bcs INTO bcs_exception.
WRITE: 'Fehler aufgetreten.'(001).
WRITE: 'Fehlertyp:'(002), bcs_exception->error_type.
EXIT.
ENDTRY.
ENDIF.Hi,
I am facing a problem in sending a smartform as a email for all other Languages except english and another problem is its sending the email but the output status is still in RED in the messages tab.
the program is working fine for english.
Please do find the below code using which i would be sending the smartform as an email for a PO along with the line item attachments.
Please help.
Arun.
Determine smartform function module for purchase document
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = lf_formname
IMPORTING
fm_name = lf_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
error handling
ent_retco = sy-subrc.
IF sy-subrc = 1.
MESSAGE e001(/smb40/ssfcomposer).
ENDIF.
IF sy-subrc = 2.
MESSAGE e002(/smb40/ssfcomposer) WITH tnapr-sform.
ENDIF.
PERFORM protocol_update_i.
ENDIF.
*Start of changes <Arun K Singarapu> C082493 <04/28/2008>
*for print preview
IF sy-ucomm = 'PREVOUTPUT' OR sy-ucomm = 'VIEW'.
CALL FUNCTION lf_fm_name "'/1BCDWB/SF00000197'
EXPORTING
control_parameters = wa_ctrlop
output_options = wa_compop
user_settings = 'X'
is_ekko = l_doc-xekko
is_pekko = l_doc-xpekko
is_nast = l_nast
iv_from_mem = l_from_memory
iv_druvo = iv_druvo
iv_xfz = iv_xfz
IMPORTING
job_output_info = wa_return
TABLES
it_ekpo = l_doc-xekpo[]
it_ekpa = l_doc-xekpa[]
it_pekpo = l_doc-xpekpo[]
it_eket = l_doc-xeket[]
it_tkomv = l_doc-xtkomv[]
it_ekkn = l_doc-xekkn[]
it_ekek = l_doc-xekek[]
it_komk = l_xkomk[]
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
EXIT.
ELSE.
wa_ctrlop-LANGU = nast-spras.
wa_ctrlop-getotf = 'X'.
wa_ctrlop-no_dialog = 'X'.
wa_compop-tdnoprev = 'X'.
CALL FUNCTION lf_fm_name "'/1BCDWB/SF00000197'
EXPORTING
control_parameters = wa_ctrlop
output_options = wa_compop
user_settings = 'X'
is_ekko = l_doc-xekko
is_pekko = l_doc-xpekko
is_nast = l_nast
iv_from_mem = l_from_memory
iv_druvo = iv_druvo
iv_xfz = iv_xfz
IMPORTING
job_output_info = wa_return
TABLES
it_ekpo = l_doc-xekpo[]
it_ekpa = l_doc-xekpa[]
it_pekpo = l_doc-xpekpo[]
it_eket = l_doc-xeket[]
it_tkomv = l_doc-xtkomv[]
it_ekkn = l_doc-xekkn[]
it_ekek = l_doc-xekek[]
it_komk = l_xkomk[]
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*Convert the data from OTF to PDF format
it_otf[] = wa_return-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = l_len_in
bin_file = lp_xcontent
TABLES
otf = it_otf
lines = it_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
TRY.
---------- create persistent send request ----------------------
send_request = cl_bcs=>create_persistent( ).
len = XSTRLEN( lp_xcontent ).
transform to solix tab
lt_solix =
cl_document_bcs=>xstring_to_solix(
ip_xstring = lp_xcontent ).
Create Body to the E-mail.
APPEND Text-005 TO l_text.
Attachment Name
l_ponumber = text-004.
CONCATENATE l_ponumber l_doc-xekko-ebeln INTO l_ponumber.
Subject for the E-Mail.
l_subject = text-001.
CONCATENATE l_subject l_doc-xekko-ebeln INTO l_subject.
*create document E-Mail.
CALL METHOD cl_document_bcs=>create_document
EXPORTING
i_type = 'RAW'
i_subject = l_subject
i_length = '13'
i_text = l_text
RECEIVING
result = l_email_object.
*Create PDF Document
bcs_doc = cl_document_bcs=>create_document(
i_type = 'PDF'
i_subject = l_ponumber
i_length = len
i_language = nast-spras
i_hex = lt_solix
*Type casting
obj_pdf_file ?= bcs_doc.
Add PDF document as an attachment
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_pdf_file.
get the attachments of the PO for each line item
SELECT ebeln
ebelp
FROM ekpo
INTO TABLE it_ekpo
WHERE ebeln = l_doc-xekko-ebeln.
concatenate PO and the Line Item Numebr to get the Object key
LOOP AT it_ekpo INTO wa_ekpo.
CONCATENATE wa_ekpo-ebeln wa_ekpo-ebelp INTO wa_temp-objky.
APPEND wa_temp TO it_temp.
CLEAR: wa_temp,wa_ekpo.
ENDLOOP.
*Get data from table DRAD
IF it_temp[] IS NOT INITIAL.
SELECT dokar
doknr
dokvr
doktl
objky
FROM drad
client specified
INTO TABLE it_drad
FOR ALL ENTRIES IN it_temp
WHERE mandt = sy-mandt
AND objky = it_temp-objky.
ENDIF.
IF NOT it_drad IS INITIAL.
SELECT * FROM dms_doc2loio
INTO TABLE it_dms_doc2loio
FOR ALL ENTRIES IN it_drad
WHERE dokar = 'SRM'
AND doknr = it_drad-doknr
AND dokvr = it_drad-dokvr
AND doktl = it_drad-doktl.
ENDIF.
Get the Physical object class and Object ID of the attachment
IF NOT it_dms_doc2loio IS INITIAL.
SELECT * FROM dms_ph_cd1
INTO TABLE it_dms_ph_cd1
FOR ALL ENTRIES IN it_dms_doc2loio
WHERE loio_id = it_dms_doc2loio-lo_objid.
ENDIF.
Get the file from the DMS server using the below function module.
LOOP AT it_dms_ph_cd1 INTO wa_dms_ph_cd1.
wa_object_id-class = wa_dms_ph_cd1-ph_class.
wa_object_id-objid = wa_dms_ph_cd1-phio_id.
CALL FUNCTION 'SDOK_PHIO_LOAD_CONTENT'
EXPORTING
object_id = wa_object_id
client = sy-mandt
TABLES
file_access_info = it_file_access_info
file_content_binary = it_sdokcntbin
EXCEPTIONS
not_existing = 1
not_authorized = 2
no_content = 3
bad_storage_type = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
READ TABLE it_file_access_info INTO wa_file_access_info INDEX 1.
IF wa_file_access_info-mimetype = 'application/msword'.
l_doc_type = 'DOC'.
CLEAR: a_xstring,len.
LOOP AT it_sdokcntbin INTO wa_sdokcntbin.
CONCATENATE a_xstring wa_sdokcntbin-line
INTO a_xstring IN BYTE MODE.
ENDLOOP.
len = XSTRLEN( a_xstring ).
transform to solix tab - adding additional attachments
REFRESH lt_solix.
lt_solix =
cl_document_bcs=>xstring_to_solix(
ip_xstring = a_xstring ).
CLEAR l_filename.
Get the file name
l_filename = wa_file_access_info-file_name.
bcs_doc1 = cl_document_bcs=>create_document(
i_type = l_doc_type
i_subject = l_filename
i_length = len
i_language = sy-langu
i_hex = lt_solix
*Type casting
obj_file ?= bcs_doc1.
Add Attachment as a document to the email object
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_file.
for PDF document
ELSEIF wa_file_access_info-mimetype = 'application/pdf'.
l_doc_type = 'PDF'.
file_size = wa_file_access_info-file_size.
Convert the 1022 binary data to xstring
CLEAR a_xstring.
CALL FUNCTION 'SCMS_BINARY_TO_XSTRING'
EXPORTING
input_length = file_size
IMPORTING
buffer = a_xstring
TABLES
binary_tab = it_sdokcntbin
EXCEPTIONS
failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
DATA: w_output_length TYPE i.
Convert Xstring to 255 RAW
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
buffer = a_xstring
IMPORTING
output_length = w_output_length
TABLES
binary_tab = lt_content_bin.
len = w_output_length.
CLEAR l_filename.
Get the file name
l_filename = wa_file_access_info-file_name.
bcs_doc1 = cl_document_bcs=>create_document(
i_type = l_doc_type
i_subject = l_filename
i_length = len
i_language = sy-langu
i_hex = lt_content_bin
type casting
obj_file ?= bcs_doc1.
Add Attachment as a document to the email object
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_file.
for Excel Document
ELSEIF wa_file_access_info-mimetype = 'application/msexcel'.
l_doc_type = 'XLS'.
CLEAR: a_xstring,len.
LOOP AT it_sdokcntbin INTO wa_sdokcntbin.
CONCATENATE a_xstring wa_sdokcntbin-line
INTO a_xstring IN BYTE MODE.
ENDLOOP.
len = XSTRLEN( a_xstring ).
transform to solix tab - adding additional attachments
REFRESH lt_solix.
lt_solix =
cl_document_bcs=>xstring_to_solix(
ip_xstring = a_xstring ).
CLEAR l_filename.
Get the file name
l_filename = wa_file_access_info-file_name.
bcs_doc1 = cl_document_bcs=>create_document(
i_type = l_doc_type
i_subject = l_filename
i_length = len
i_language = sy-langu
i_hex = lt_solix
*Type casting
obj_file ?= bcs_doc1.
Add Attachment as a document to the email object
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_file.
for text doxument
ELSEIF wa_file_access_info-mimetype = 'plain/text'.
l_doc_type = 'TXT'.
file_size = wa_file_access_info-file_size.
Get the file name
l_filename = wa_file_access_info-file_name.
CALL FUNCTION 'SCMS_BINARY_TO_TEXT'
EXPORTING
input_length = file_size
TABLES
binary_tab = it_sdokcntbin
text_tab = file_data
EXCEPTIONS
failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL METHOD cl_document_bcs=>create_document
EXPORTING
i_type = l_doc_type
i_subject = l_filename
i_text = file_data
RECEIVING
result = bcs_doc1.
obj_file ?= bcs_doc1.
Add Attachment as a document to the email object
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_file.
ENDIF.
CLEAR:it_file_access_info,it_sdokcntbin.
CLEAR:wa_object_id,wa_file_access_info,file_size.
ENDLOOP.
CALL METHOD send_request->set_document( l_email_object ).
*Get the address number for the vendor
SELECT SINGLE adrnr
FROM lfa1
INTO l_adrnr
WHERE lifnr = l_doc-xekko-lifnr.
MOVE l_adrnr TO l_addrno.
Get the Email Address for the vendor using address number
CALL FUNCTION 'ADDR_GET_REMOTE'
EXPORTING
addrnumber = l_addrno
TABLES
adsmtp = it_adsmtp
EXCEPTIONS
parameter_error = 1
address_not_exist = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
sender = cl_sapuser_bcs=>create( sy-uname ).
CALL METHOD send_request->set_sender
EXPORTING
i_sender = sender.
READ TABLE it_adsmtp INTO wa_adsmtp WITH KEY flg_nouse = 'X'.
IF sy-subrc = 0.
LOOP AT it_adsmtp INTO wa_adsmtp WHERE flg_nouse = 'X'.
CALL METHOD cl_cam_address_bcs=>create_internet_address
EXPORTING
i_address_string = wa_adsmtp-smtp_addr
RECEIVING
result = recipient.
CALL METHOD send_request->add_recipient
EXPORTING
i_recipient = recipient
i_express = 'X'.
ENDLOOP.
ELSE.
READ TABLE it_adsmtp INTO wa_adsmtp WITH KEY flgdefault = 'X'.
IF sy-subrc = 0.
CALL METHOD cl_cam_address_bcs=>create_internet_address
EXPORTING
i_address_string = wa_adsmtp-smtp_addr
RECEIVING
result = recipient.
CALL METHOD send_request->add_recipient
EXPORTING
i_recipient = recipient
i_express = 'X'.
ENDIF.
ENDIF.
CALL METHOD send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = l_sent_to_all ).
CATCH cx_bcs INTO bcs_exception.
WRITE: 'Fehler aufgetreten.'(001).
WRITE: 'Fehlertyp:'(002), bcs_exception->error_type.
EXIT.
ENDTRY.
ENDIF. -
Need to send the report output in email body.
Hi Friends,
I need to send the report output in body of the email but not as an attachment.
Requesting your suggestions. Please elaborated answers are expected.
Thanks & Regards,
S.Suresh Babu.If you are looking for same output to be available in the email body, i think this is not possible.
If you are just concentrated on the data, then you can do as below.
1. In your custom program, submit the actual report program via spool and by making use of that spool, read the spool content (We have function modules which can download the content from spool to the internal table), and by making use of this internal table, build the actual internal table as required which will be passed to email function module lets say SO_OBJECT_SEND etc..
2. You can make use of even LIST_TO_MEMORY and LIST_FROM_MEMORY function modules as well instead of spool, if you have data in the final internal table.
I am not sure, how can we handle in terms of logos if any.....or the data in the top of page related things...... -
How to send a SmartForm output as Email to external id?
I want the Smartform output to email to extrenal email-id.
I don't want the Smartform output as any kind of attachment, but the Smartform output needs to be shown on the main email body. Can anyone pls. help me out?First, thanks for your responses.
I haven't found the demo program 'BCS_EXAMPLE_6' in SAP 4.7. But then I got it in SAP 5.0 version. But this program only describes how to send Form output as PDF attachment with email. But this is well-known and I haven't asked for this. I want the Smartform output within the mail-body without attachment.
The weblog at "/people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp seems a more logical one, though I have already tried it out. Here the html page creation and graphics load -- everything is going right. But this HTML page is being delivered as an Attachment within the email. The normal HTML Email is not coming. I think this technique wouldn't work with all mailing tools. Here in the weblog, Pavan has shown the example with Microsoft Outlook. But I have tested with Lotus Notes and Yahoo. And In both cases, the mail is coming with attached HTML file (in .mht format), but not as a notmal html mail without attachments. -
Hi,
Actually my requirement is to send the smartform through email using medium external send..If the email Id of the recipient is not present then the smarform has to be sent through fax using medium external send.So I have changed the value of nast-nacha from 5 to 2 and added the following code to my program.
ls_control_param-device = 'TELEFAX'.
ls_control_param-preview = 'X'.
ls_control_param-no_dialog = 'X'.
ls_control_param-getotf = 'X'.
ls_composer_param-tdtitle = 'Advance shipment notification'.
ls_composer_param-tdtelenum = lv_telfx.
ls_composer_param-tdteleland = lv_land1.
ls_composer_param-tdschedule = 'IMM'.
ls_composer_param-tdsenddate = sy-datum.
ls_composer_param-tdsendtime = sy-timlo.
CALL FUNCTION lf_fm_name
EXPORTING
archive_index = toa_dara
archive_parameters = arc_params
control_parameters = ls_control_param
mail_appl_obj =
mail_recipient = lv_recipient
mail_sender = lv_sender
output_options = ls_composer_param
user_settings = ' '
vttkvb = vttkvb
IS_DLV_DELNOTE = LS_DLV_DELNOTE
is_nast = nast
IMPORTING
document_output_info = document_output_info
job_output_info = ls_return
job_output_options = job_output_options
TABLES xvttp = xvttp
xvtts = xvtts
xvtsp = xvtsp
EXCEPTIONS formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
While debugging i am not finding any error in the program.But in SOST transaction,it is not showing any entry for the smartform o/p which is sent through fax.
Could anyone give me a proper solution for this?Hi,
All the configuration is done in SCOT transaction to send the smartform through fax.The issue is I am able to send the smartform through fax.I am able to see that in SOST transaction.But the output is coming in abap list format.It should come in OTF format.What can be done for this?
Regards,
Hema -
A utility program to send the content of a spool OR an internal table in
Hello Guys,help me.
A utility program to send the content of a spool / an internal table in various formats like HTML, PDF, TXT etc.
can u explain wht is this completely
Thank you
Santhosh.Please check below links for better understanding of sending data from SAP to various formats...
internal table to an XML file
http://www.erpgenie.com/abap/code/abap27.htm
Report Output to a PDF File
http://www.erpgenie.com/abap/code/abap51.htm
HTML EMail from ABAP
http://www.erpgenie.com/abap/code/abap20.htm
Spool from SAP to Acrobat format
http://www.erpgenie.com/abap/pdf_creation.htm -
Central Management server - executed a query but how to send the query output in the form of mail?
Hi All,
i have used CMS in SQL 2008 R2. i have added couple of servers in its group. i have executed a query & i need to send the query output in the form of email.
basically query is checking the rows count from couple of user tables in servers.
issue here is how to copy the data that is used by CMS? i need to work on automate the rows count in difft user table in db servers
could you please suggest how can i achieve this?Copy to what?
SELECT COUNT(*) FROM sys.objects
Running the above statement returns two columns (server name and count)
All the servers SS2005 and onwards , then use
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'name',
@recipients = '[email protected]',
@query = 'SELECT COUNT(*) FROM sys.objects',
@subject = 'Count rows'
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
Problem in sending the smartform as email for other language except english
Hi Experts,
I could not send the smartform as an attachment for other languages, but where as i could send it in english.
The program is working fine with print priview but not when sending the SF as an attachment
(in other languages except english).
Please do find the below code which i used to send the smartform as an attachment.
Please let me know if there is any mistake in the code.
wa_ctrlop-LANGU = nast-spras.
wa_ctrlop-getotf = 'X'.
wa_ctrlop-no_dialog = 'X'.
wa_compop-tdnoprev = 'X'.
CALL FUNCTION lf_fm_name "'/1BCDWB/SF00000197'
EXPORTING
control_parameters = wa_ctrlop
output_options = wa_compop
user_settings = 'X'
is_ekko = l_doc-xekko
is_pekko = l_doc-xpekko
is_nast = l_nast
iv_from_mem = l_from_memory
iv_druvo = iv_druvo
iv_xfz = iv_xfz
IMPORTING
job_output_info = wa_return
TABLES
it_ekpo = l_doc-xekpo[]
it_ekpa = l_doc-xekpa[]
it_pekpo = l_doc-xpekpo[]
it_eket = l_doc-xeket[]
it_tkomv = l_doc-xtkomv[]
it_ekkn = l_doc-xekkn[]
it_ekek = l_doc-xekek[]
it_komk = l_xkomk[]
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*Convert the data from OTF to PDF format
it_otf[] = wa_return-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = l_len_in
bin_file = lp_xcontent
TABLES
otf = it_otf
lines = it_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
TRY.
---------- create persistent send request ----------------------
send_request = cl_bcs=>create_persistent( ).
len = XSTRLEN( lp_xcontent ).
transform to solix tab
lt_solix =
cl_document_bcs=>xstring_to_solix(
ip_xstring = lp_xcontent ).
Create Body to the E-mail.
APPEND Text-005 TO l_text.
Attachment Name
l_ponumber = text-004.
CONCATENATE l_ponumber l_doc-xekko-ebeln INTO l_ponumber.
Subject for the E-Mail.
l_subject = text-001.
CONCATENATE l_subject l_doc-xekko-ebeln INTO l_subject.
*create document E-Mail.
*TRY.
CALL METHOD cl_document_bcs=>create_document
EXPORTING
i_type = 'RAW'
i_subject = l_subject
i_length = '13'
i_language = nast-spras
i_importance =
i_sensitivity =
i_text = l_text
i_hex =
i_header =
i_sender =
receiving
RESULT = l_email_object
CATCH cx_document_bcs .
*ENDTRY.
CALL METHOD cl_document_bcs=>create_document
EXPORTING
i_type = 'RAW'
i_subject = l_subject
i_length = '13'
i_text = l_text
RECEIVING
result = l_email_object.
*Create PDF Document
bcs_doc = cl_document_bcs=>create_document(
i_type = 'PDF'
i_subject = l_ponumber
i_length = len
i_language = nast-spras
i_hex = lt_solix
*Type casting
obj_pdf_file ?= bcs_doc.
Add PDF document as an attachment
CALL METHOD l_email_object->add_document_as_attachment
EXPORTING
im_document = obj_pdf_file.hi,
i tried with ur problem.but i am able send mail in other languages also.actaullly i wrote a msg whether the mail has been sent or not.i got success message. i am placing my code here please go thorugh it,and do relavant modifications.
*& Report ZPPS_SMARTFORM_TO_PDF
REPORT ZPPS_SMARTFORM_TO_PDF.
PARAMETER: p_date LIKE sy-datum.
PARAMETER: p_rea TYPE char255.
DATA: t_otfdata TYPE ssfcrescl,
t_lines LIKE tline OCCURS 0 WITH HEADER LINE,
t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
t_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
Objects to send mail.
DATA:T_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
T_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE.
DATA: w_filesize TYPE i,
w_bin_filesize TYPE i,
wa_ctrlop TYPE ssfctrlop,
wa_outopt TYPE ssfcompop,
WA_BUFFER TYPE STRING, "To convert from 132 to 255
WA_OBJHEAD TYPE SOLI_TAB,
WA_DOC_CHNG TYPE SODOCCHGI1,
W_DATA TYPE SODOCCHGI1.
DATA: form_name TYPE rs38l_fnam,
V_LINES_TXT TYPE I,
V_LINES_BIN TYPE I,
nast-spras type sy-langu value 'DE'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZSR_DEMO1'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = form_name
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
wa_ctrlop-LANGU = nast-spras.
wa_ctrlop-getotf = 'X'.
wa_ctrlop-no_dialog = 'X'.
wa_outopt-tdnoprev = 'X'.
CALL FUNCTION form_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = wa_ctrlop
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS = wa_outopt
USER_SETTINGS = 'X'
MYDATE = p_date
REASON = p_rea
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO = t_otfdata
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
t_otf[] = t_otfdata-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
ARCHIVE_INDEX = ' '
COPYNUMBER = 0
ASCII_BIDI_VIS2LOG = ' '
PDF_DELETE_OTFTAB = ' '
IMPORTING
BIN_FILESIZE = w_bin_filesize
BIN_FILE =
TABLES
OTF = t_otf
LINES = t_lines
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
ERR_BAD_OTF = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at t_lines.
TRANSLATE t_lines USING '~'.
CONCATENATE WA_BUFFER T_LINES INTO WA_BUFFER.
ENDLOOP.
TRANSLATE WA_BUFFER USING '~'.
DO.
t_RECORD = WA_BUFFER.
APPEND t_RECORD.
SHIFT WA_BUFFER LEFT BY 255 PLACES.
IF WA_BUFFER IS INITIAL.
EXIT.
ENDIF.
ENDDO.
Attachment
REFRESH: T_RECLIST,
T_OBJTXT,
T_OBJBIN,
T_OBJPACK.
CLEAR WA_OBJHEAD.
T_OBJBIN[] = T_RECORD[].
Create Message Body Title and Description
T_OBJTXT = 'test with pdf-Attachment!'.
APPEND T_OBJTXT.
DESCRIBE TABLE T_OBJTXT LINES V_LINES_TXT.
READ TABLE T_OBJTXT INDEX V_LINES_TXT.
WA_DOC_CHNG-OBJ_NAME = 'smartform'.
WA_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
WA_DOC_CHNG-OBJ_DESCR = 'smartform'.
WA_DOC_CHNG-SENSITIVTY = 'F'.
WA_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
Main Text
CLEAR T_OBJPACK-TRANSF_BIN.
T_OBJPACK-HEAD_START = 1.
T_OBJPACK-HEAD_NUM = 0.
T_OBJPACK-BODY_START = 1.
T_OBJPACK-BODY_NUM = V_LINES_TXT.
T_OBJPACK-DOC_TYPE = 'RAW'.
APPEND T_OBJPACK.
Attachment (pdf-Attachment)
T_OBJPACK-TRANSF_BIN = 'X'.
T_OBJPACK-HEAD_START = 1.
T_OBJPACK-HEAD_NUM = 0.
T_OBJPACK-BODY_START = 1.
DESCRIBE TABLE T_OBJBIN LINES V_LINES_BIN.
READ TABLE T_OBJBIN INDEX V_LINES_BIN.
T_OBJPACK-DOC_SIZE = V_LINES_BIN * 255 .
T_OBJPACK-BODY_NUM = V_LINES_BIN.
T_OBJPACK-DOC_TYPE = 'PDF'.
T_OBJPACK-OBJ_NAME = 'smart'.
T_OBJPACK-OBJ_DESCR = 'test'.
APPEND T_OBJPACK.
CLEAR T_RECLIST.
T_RECLIST-RECEIVER = 'MAIL-ID'.
T_RECLIST-REC_TYPE = 'U'.
APPEND T_RECLIST.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = WA_DOC_CHNG
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
TABLES
PACKING_LIST = T_OBJPACK
OBJECT_HEADER = WA_OBJHEAD
CONTENTS_BIN = T_OBJBIN
CONTENTS_TXT = T_OBJTXT
RECEIVERS = T_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC <> 0.
WRITE:/ 'Error When Sending the File', SY-SUBRC.
ELSE.
WRITE:/ 'Mail sent'.
ENDIF.
and i thought of one more soluyion u can write
wa_ctrlop-langu = T002-spras. i think it will also help for u.
revert back if any questions.
please reward me if helpful.
gupta.pullipudi -
Problem in displaying data in the smartform output.
Dear Freinds,
I have a requirement as per my requirement i have to display the employee dependents details in the smartform output.
I have taken a table in smartform and collected all teh employee dependents details . Each dependents his own details around 8 fields. so iam displaying in the smartform it is working till now no problem ........iam getting data as below
Dependentrelation | dependentname|passportno|expirydate|visano|visadate|visa expire date| ResidenceNo|Residence issuedate|
spouse | Raja |123456 |10/09/2009|122233|10/01/2009|10/01/2010 | 1001 |10/01/2009
These are the one of the dependentds details iam having till now , like this i have another dependts details. Now the problem i have
to add some fields to this list ( to this internal table) ...........if iam adding one more feild data is getting truncated as i dont have any more fields to add to right in the horizontal line........how can i solve this issue and how can i add further fields to this list
like date of birth of the dependents and gender
please could any one tell how i can solve this issue.
regards
divya.If this is a Tablethen only thing you can do is re-size the grid and font size to adjust your data. Like, displaying HEADINGS & DATAs in 2 rows instead of 1, etc.
Nothing else can be done. Otherwise you have to trim down the data to adjust in one page. -
How to write the code to send the report output to the local file.
dear all,
how to write the code to send the report output to the local file.
Thanks & Regards,
Jyothi.Hi,
Try this , it will display report and download the file as well. Just vhange the path and execute
TYPE-POOLS : SLIS.
DATA : IT_SCARR TYPE TABLE OF SCARR,
IT_FCAT TYPE SLIS_T_FIELDCAT_ALV.
SELECT *
FROM SCARR
INTO TABLE IT_SCARR.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
* I_PROGRAM_NAME =
* I_INTERNAL_TABNAME =
I_STRUCTURE_NAME = 'SCARR'
* I_CLIENT_NEVER_DISPLAY = 'X'
* I_INCLNAME =
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE =
CHANGING
CT_FIELDCAT = IT_FCAT
* EXCEPTIONS
* INCONSISTENT_INTERFACE = 1
* PROGRAM_ERROR = 2
* OTHERS = 3
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE = ' '
* I_CALLBACK_PROGRAM = ' '
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
* I_STRUCTURE_NAME =
* IS_LAYOUT =
IT_FIELDCAT = IT_FCAT
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
* IT_SORT =
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
* I_SAVE = ' '
* IS_VARIANT =
* IT_EVENTS =
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* IR_SALV_LIST_ADAPTER =
* IT_EXCEPT_QINFO =
* I_SUPPRESS_EMPTY_DATA = ABAP_FALSE
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_SCARR
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
EXPORTING
* BIN_FILESIZE =
FILENAME = 'C:\Documents and Settings\sap\Desktop\Hi.xls' " Change path
* FILETYPE = 'ASC'
* APPEND = SPACE
* WRITE_FIELD_SEPARATOR = SPACE
* HEADER = '00'
* TRUNC_TRAILING_BLANKS = SPACE
* WRITE_LF = 'X'
* COL_SELECT = SPACE
* COL_SELECT_MASK = SPACE
* DAT_MODE = SPACE
* CONFIRM_OVERWRITE = SPACE
* NO_AUTH_CHECK = SPACE
* CODEPAGE = SPACE
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* WRITE_BOM = SPACE
* TRUNC_TRAILING_BLANKS_EOL = 'X'
* IMPORTING
* FILELENGTH =
CHANGING
DATA_TAB = IT_SCARR
* EXCEPTIONS
* FILE_WRITE_ERROR = 1
* NO_BATCH = 2
* GUI_REFUSE_FILETRANSFER = 3
* INVALID_TYPE = 4
* NO_AUTHORITY = 5
* UNKNOWN_ERROR = 6
* HEADER_NOT_ALLOWED = 7
* SEPARATOR_NOT_ALLOWED = 8
* FILESIZE_NOT_ALLOWED = 9
* HEADER_TOO_LONG = 10
* DP_ERROR_CREATE = 11
* DP_ERROR_SEND = 12
* DP_ERROR_WRITE = 13
* UNKNOWN_DP_ERROR = 14
* ACCESS_DENIED = 15
* DP_OUT_OF_MEMORY = 16
* DISK_FULL = 17
* DP_TIMEOUT = 18
* FILE_NOT_FOUND = 19
* DATAPROVIDER_EXCEPTION = 20
* CONTROL_FLUSH_ERROR = 21
* NOT_SUPPORTED_BY_GUI = 22
* ERROR_NO_GUI = 23
* others = 24
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>EXECUTE
EXPORTING
DOCUMENT = 'C:\Documents and Settings\sap\Desktop\Hi.xls' "Change path
* APPLICATION =
* PARAMETER =
* DEFAULT_DIRECTORY =
* MAXIMIZED =
* MINIMIZED =
* SYNCHRONOUS =
* OPERATION = 'OPEN'
* EXCEPTIONS
* CNTL_ERROR = 1
* ERROR_NO_GUI = 2
* BAD_PARAMETER = 3
* FILE_NOT_FOUND = 4
* PATH_NOT_FOUND = 5
* FILE_EXTENSION_UNKNOWN = 6
* ERROR_EXECUTE_FAILED = 7
* SYNCHRONOUS_FAILED = 8
* NOT_SUPPORTED_BY_GUI = 9
* others = 10
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
Send the billing output by e-mail for the user
Hi,
Can you tell me if it's possible to send the billing output by e-mail (Medium = 5 - External send) for the user that create the billing document? the e-mail of the user is in SU01D.
Thanks in advance
DoraHi Dora,
What you can do is when you want to send a mail to customer after you receive the email for bill is do the following settings.
1) Create a condition record VV31 with the required Key combination where you can give the name of the Employee or end user with the email id.
2) Select the trasmission medium as 7 ( Simple Mail)
3) Once the Billing is done E-Mail will be triggered.
4) Downlaod it or forward it to your client with the additional text in the E-Mail.
Hope this helps.
Thanks and Regards
Rohit Dujari
Maybe you are looking for
-
How to edit the node value of a tree in webdynpro java
Hi ALL I have Tree UI element where i got displayed all the nodes by calling the BAPI Now my requirement is when i put the cursor at any node in the Tree struture then on click of insert button i need to insert the new node with the text , the user
-
How do I transfer my recent purchases to my nano?
This used to be very easy but a lot has changed for the worst with this itunes 11. Who created this giant mess and when are they going to fix it?? I made 25 recent purchases from the store (something that I'll stop doing). How do you get those purcha
-
my windows xp pro crashes when i try to sync my 10 day old ipad3 to itunes.
-
Good Morning, I want to change the levels of audio within a single clip. I used to know how to set the points in the audio line, but for the life of me I can't remember how to do it. Thanks for your help. Andy
-
Problem with external FireWire drive
Two weeks ago I purchased a 1 tb Iomega ultra drive with FireWire 800/Firewire 400/USB 2/ESATA to use for back ups. I plugged it in the Firewire 800 port of my iMac. It worked fine until early this morning. I noticed there was a problem first because