Sending the text file in ECC 6.0

Hi All ,
Note: I searched the so many forums about this but didnt not get the correct solution so I am posting this.
In 4.7 version i used the FM SO_NEW_DOCUMENT_ATT_SEND_API1 to generate the Text file, and it is working good. but now after the upgrdation to ECC 6.0 version , same program with this FM is not working same like 4.7 version.
Is there any thing need to add or remove or Any SAP NOTE related to this?
Thanks in advance.
Regards,
Bharani

Bharani,
I am using the same FM in ECC 6.0.   Check your data declarations. There may be a change there.
Regards
MPersson
* data declarations for sending Email
DATA:   w_text(100) TYPE c.
DATA    w_date(10) TYPE c.
DATA    w_url(25) TYPE c.
DATA:   w_subject(50)   TYPE c.
DATA:   it_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
        it_contents     LIKE solisti1   OCCURS 0 WITH HEADER LINE,
        it_receivers    LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
        it_attachment   LIKE solisti1   OCCURS 0 WITH HEADER LINE,
        gd_cnt          TYPE i,
        gd_sent_all(1) TYPE c,
        gd_doc_data     LIKE sodocchgi1,
        gd_error        TYPE sy-subrc.
DATA:   it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                                                 WITH HEADER LINE.
* ~~~~~~~~~~~~~~ further along in your program ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CLEAR w_url.
* (SENDS Copy TO USER - confirms email )
    it_receivers-receiver   = w_url.
    it_receivers-rec_type   = 'U'.
    it_receivers-com_type   = 'INT'.
    it_receivers-notif_del = 'X'.
    it_receivers-notif_ndel = 'X'.
    APPEND it_receivers.
CLEAR gd_error.
* Call the FM to post the message to SAPMAIL
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      document_data              = gd_doc_data
      put_in_outbox              = 'X'
      commit_work                = 'X'
    IMPORTING
      sent_to_all                = gd_sent_all
    TABLES
      packing_list               = it_packing_list
      contents_txt               = it_message
      receivers                  = it_receivers
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      document_type_not_exist    = 3
      operation_no_authorization = 4
      parameter_error            = 5
      x_error                    = 6
      enqueue_error              = 7
      OTHERS                     = 8.
* Store function module return code
gd_error = sy-subrc.

Similar Messages

Problen when Sending the text file as attachment to the external mail

HI,
I am sending the text file as an attachment to a aexternal mai. mailing is going with text file attachment, but text file is empty. No information in the file is going, only empty text file is going. I am sending the code iam using. Please suggest, if I need to change any passing parameters orany other other solution.
tables: knb1,kna1,adr6,ITEMSET,bsid,TSP01.
           INTERNAL TABLES
DATA: BEGIN OF it_kna1 occurs 0,
        KUNNR LIKE KNA1-KUNNR,
        ADRNR LIKE KNA1-ADRNR,
      END OF it_kna1.
DATA: BEGIN OF it_email occurs 0,
        ADDRNUMBER LIKE ADR6-ADDRNUMBER,
        SMTP_ADDR LIKE ADR6-SMTP_ADDR,
      END OF it_email.
DATA: BEGIN OF it_bsid occurs 0,
       KUNNR LIKE BSID-KUNNR,
       BUKRS LIKE BSID-BUKRS,
     END OF it_bsid.
DATA: BEGIN OF it_final occurs 0,
        KUNNR LIKE KNA1-KUNNR,
        ADRNR LIKE ADR6-ADDRNUMBER,
        EMAIL LIKE ADR6-SMTP_ADDR,
      END OF it_final.
DATA: BEGIN OF BUFFER OCCURS 10000,
          TEXT(255) TYPE C,
        END OF BUFFER.
data:xtext type solix_tab." occurs 0 with header line."line.
data:xi_pdf type soli_tab.
DATA: OBJPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE,
      OBJHEAD LIKE SOLISTI1   OCCURS 1 WITH HEADER LINE,
      OBJBIN LIKE SOLISTI1   OCCURS 0 WITH HEADER LINE,
      OBJTXT LIKE SOLISTI1   OCCURS 10 WITH HEADER LINE,
      RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE,
      DOC_CHNG LIKE SODOCCHGI1,
     PARAMS   LIKE PRI_PARAMS,
     ARPARAMS LIKE ARC_PARAMS,
     DAYS(1) TYPE N VALUE 8,
     COUNT(3) TYPE N VALUE 1,
     VALID    TYPE C,
     RECEIVER(30),
     STR(256).
data: spoolid    type tsp01-rqident,
       pdf_table like tline occurs 0 with header line,
       v_bytecount type i,
       itab_pdf like tline occurs 10 with header line,
      xi_pdf like tline occurs 0 with header line,
      xi_pdf like buffer occurs 0 with header line,
       xi_pdf_1 like xi_pdf,
       v_length(2) type p,
       html like solisti1   occurs 0 with header line,
       xi_temp      like bapiqcmime occurs 0 with header line,
       xi_mime(255) type c occurs 0 with header line.
          VARIABLES
data: g_email type adr6-smtp_addr,
      TAB_LINES LIKE SY-TABIX,
      G_FLAG(1) TYPE C.
     g_norm(1) TYPE C,
     g_shbv(1) TYPE C,
     g_merk(1) TYPE C,
     g_park(1) TYPE C,
     g_apar(1) TYPE C.
data: l_lines     type i,
      line1       type i,
      l_temp(500) type c,
      l_offset    type p,
      l_lineslen(2) type p,
      l_mimelen(2) type p,
      v_spono like tsp01-rqident,
      l_tabix       like sy-tabix.
*****VIA SELECTION-SCREEN
ENDFORM.                    " SEND_TO_SPOOL
*&      Form GET_SPOOL_ID
*&      Form CONVERT_SPOOL_TO_PDF
*&      Form SEND_MAIL
FORM SEND_MAIL .
data:l_lin like sy-tabix,
        l_lint like sy-tabix,
        it_list like abaplist occurs 0,
        l_newline(2) type x value '0D0A'.
*--Data for the status output after sending
data: user_address like sousradri1 occurs 1 with header line,
        sent_to_all like sonv-flag.
clear: reclist, reclist[],
         objtxt , objtxt[],
         objpack, objpack[],
         objbin , objbin[],
         doc_chng.
*--move list to office table objbin
*--Start of Changes to support PDF attachments - UB20030116
loop at html.
   objbin-line = html-line.
   append objbin.
   clear objbin.
endloop.
loop at xi_pdf.
   objbin-line = xi_pdf-text.
   append objbin.
   clear objbin.
endloop.
*--We may write additional text to the main document
*--For faxing this will be the cover page. Like sending from SAPoffice
*--the layout set Office-Telefax will be used.
objtxt-line = 'NOTE : Please Consider the below Headers'.
append objtxt.
clear objtxt.
objtxt-line = 'Assignment --> Purchase order number '.
append objtxt.
clear objtxt.
objtxt-line = 'Document -->   Invoice No '.
append objtxt.
clear objtxt.
objtxt-line = 'Amount In DC --> Amount Due '.
append objtxt.
clear objtxt.
objtxt-line = '                                            '.
append objtxt.
clear objtxt.
objtxt-line = '                                            '.
append objtxt.
clear objtxt.
objtxt-line = 'Please find attached statement for this week'.
append objtxt.
clear objtxt.
objtxt-line = '                                            '.
append objtxt.
clear objtxt.
objtxt-line = 'This is an AUTO GENERATED MAIL'.
concatenate objtxt-line 'Please Do not reply to this mail' into
objtxt-line separated by ' '.
append objtxt.
clear objtxt.
describe table objtxt lines tab_lines.
read table objtxt index tab_lines.
*--Create the document which is to be sent
doc_chng-obj_name = 'List'.
doc_chng-obj_name = 'SAPRPT'.
doc_chng-obj_descr = 'Customer statement for the week'.
concatenate 'Customer statement for '
              sy-datum into
              doc_chng-obj_descr
              separated by ' '.
doc_chng-doc_size = ( tab_lines - 1 ) * 255 + strlen( objtxt ).
*--Fill the fields of the packing_list for the main document:
*--It is a text document
clear objpack-transf_bin.
*--The document needs no header (head_num = 0)
objpack-head_start = 1.
objpack-head_num = 0.
*--but it has a body
objpack-body_start = 1.
objpack-body_num = tab_lines.
*--of type RAW
objpack-doc_type = 'RAW'.
append objpack.
*--Create the attachment (the list itself)
describe table objbin lines tab_lines.
*--Fill the fields of the packing_list for the attachment:
*--It is binary document
objpack-transf_bin = 'X'.
*--we need no header
objpack-head_start = 1.
objpack-head_num = 0.
*--but a body
objpack-body_start = 1.
objpack-body_num = tab_lines.
*--of type G_DOC_TYPE
objpack-doc_type = 'PDF'. "commented on 12/13/2007
objpack-doc_type = 'TXT'. "commented on 12/13/2007
objpack-obj_name = 'Attachment'.
objpack-obj_descr = 'Customer Statement'.
concatenate 'Customer Statement' sy-datum into objpack-obj_descr.
objpack-doc_size = tab_lines * 255.
append objpack.
reclist-receiver = g_email.
reclist-rec_type = 'U'.
reclist-com_type = 'FAX'.
append reclist.
data:xi type soli.
xi-line = 'haisdgsfsdf'.
append xi to xi_pdf.
xi-line = 'haisdfdsfd'.
append xi to xi_pdf.
xi-line = 'haisfgsdfsd'.
append xi to xi_pdf.
xi-line = 'haisdfsgfsdgg'.
append xi to xi_pdf.
*xi_pdf-text = 'hai'.
*append xi_pdf.
*xi_pdf-text = 'hai'.
*append xi_pdf.
*xi_pdf-text = 'hai'.
*append xi_pdf.
*xi_pdf-text = 'hai'.
*append xi_pdf.
CALL FUNCTION 'SO_SOLITAB_TO_SOLIXTAB'
    EXPORTING
      ip_solitab        = xi_pdf[]
   IMPORTING
     EP_SOLIXTAB       = xtext[].
**--Send the document by calling the SAPoffice API1 module for sending
**--documents with attachments
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      document_data              = doc_chng
      PUT_IN_OUTBOX              = 'X'
     COMMIT_WORK                = 'X'
    IMPORTING
      sent_to_all                = sent_to_all
    TABLES
      packing_list               = objpack
      object_header              = objhead
     contents_bin               = objbin
      contents_txt               = objtxt
      contents_hex               = xtext
      receivers                  = reclist
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      operation_no_authorization = 4
      others                     = 99.

HI,
There are lots of bugs.
Please refer this sample program to fix it.
http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm
Best regards,
Prashant

Need to send the text file using webservice

Hi,
I want to send the text file with contains data through oracle pl/sql using webservice. How can i handle this program?
Kindly share with your details.
Thanks in advance,
Maran

user8732035 wrote:
I want to send the text file with contains data through oracle pl/sql using webservice. How can i handle this program?Web services supply XML structured data. Not text files.
PL/SQL supports web services (XML output) and web procedures (text and binary output).
You need to clarify your requirements.

Sending a text file Client/Server problem

Hi,
I have two java classes (A.java and B.java). i would like to send the text file (something.txt) from A to B. Can somebody please show me how to do so? I know it is incomplete, but i really need help since im new to this. I dont know how to send and how to accept the file. Here is what i have so far:
import java.net.*;
import java.io.*;
import java.lang.*;
public class A {
        private static String hostname;                  //host name
        private static final int portA = 1111;           //source port number
        private static int portB;                        //destination port number
        private static ServerSocket s;
        private static Socket socket;
        private static BufferedReader br;
        String fileName = "something.txt";
        public A () {
        public static void send() {
                System.out.println("Send method");
                try {
                    System.out.print("> Enter Hostname: ");
                 hostname = br.readLine();
                 System.out.print("> Enter Port Number: ");
                    portB = Integer.valueOf(br.readLine()).intValue();
            catch(IOException e){}
        public static void main(String args[]) throws IOException {
import java.net.*;
import java.io.*;
import java.lang.*;
public class B {
        private static String hostname;                  //host name
        private static final int portB = 2222;           //source port number
        private static ServerSocket s;
        private static Socket socket;
        private static BufferedReader br;
        public B () {
        public static void recieve() {
             //code to recieve the text file here?
        public static void main(String args[]) throws IOException {
}I really appriciate any code to help me out. Thanks

Check out the link shown below:
http://forum.java.sun.com/thread.jsp?forum=33&thread=66616
If that doesn't answer your question, search this site for Upload
;o)
V.V.

How to send a text file over a LAN?

Hi:
I am working on a program (web app using a servlet), that produces a text file with Key / Value pairs ex) NAME
joe
CITY
los angeles
I want to send the text file over an intranet (LAN) to another pc and store it in the C:\temp directory of the receiving computer.
Is it best to use the Networking package? Any idea on tutorials or code samples to help assist me? (I posted on Servlet Technology forum; nobody answered though...thanks for any thoughts.

one way cud be that u write a program to open a port on the computer u want to store and make that program save on the required directory. then u can send a simple file in byte format over it. but doing this only wud b unsafe as others wud also hav the access. wat u cud do to prevent is to put some kind of password so that first u authenticate to server b4 u pass on the file.
bye
jods

How to send a text file attachment through mail in ECC 6.0

Hi Friends,
As per the requirement, I need to send a ALV report result as text file attachment to user in ECC 6.0 . I know how to do in 4.6C version. But the same code is not working here in ECC 6.0.
Generally to get the data in new row in the text file we use below code in 4.6c.
data: c_value type x value ' 0D '.
concatenate c_value itab-line into itab-line.
By using above code, we get each row of the itab in a new line in text file.
Same code is not working in ECC6.0 as it is not supporting to concatenate bytes with characters. Getting the error like " field c_value should be diclared as type C or I or N or T or P"
Even I have used function module NLS_STRING_CONVERT_TO_SYS to convert hexa to char. It is converting the value' 0D' to ' # '. But it is not working.
Could you please suggest me that how can get each row of itab as a new line in text file in ECC 6.0.
Itab value:
abcdefdfldjfñlkdsjfñldsjfdsñljñla
fdsljfñldskjfldsñkjfñldsjfñldsajñld
vcxusfcxusfcusafcxusafcusafcdsauc
Actual result currently coming in text file:
abcdefdfldjfñlkdsjfñldsjfdsñljñlafdsljfñldskjfldsñkjfñldsjfñldsajñldvcxusfcxusfcusafcxusafcusafcdsauc
Expected result in text file:
abcdefdfldjfñlkdsjfñldsjfdsñljñla
fdsljfñldskjfldsñkjfñldsjfñldsajñld
vcxusfcxusfcusafcxusafcusafcdsauc
Please do the needful.
Thanks
Kumar

hi,
Try this function Module
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1 '
*example code
******* Create Message Body Title and Description****************
i_objtxt = 'test with pdf-Attachment!'.
append i_objtxt.
describe table i_objtxt lines v_lines_txt.
read table i_objtxt index v_lines_txt.
wa_doc_chng-obj_name = 'smartform'.
wa_doc_chng-expiry_dat = sy-datum + 10.
wa_doc_chng-obj_descr = 'smartform'.
wa_doc_chng-sensitivty = 'F'.
wa_doc_chng-doc_size = v_lines_txt * 255.
**** Main Text*****************************
clear i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
append i_objpack.
**** Attachment (pdf-Attachment)*************
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 1.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'smartform'.
concatenate i_objpack-obj_name i_objpack-doc_type into
i_objpack-obj_descr separated by '.'.
* I_OBJPACK-OBJ_DESCR = 'test'.
i_objpack-doc_size = v_lines_bin * 255 .
append i_objpack.
* Länge des Attachment ermitteln
clear i_reclist.
i_reclist-receiver = 'email address'.
i_reclist-rec_type = 'U'.
i_reclist-express = 'X'.
data: tab_lines like sy-tabix.
describe table i_objbin lines tab_lines.
append i_reclist.
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    exporting
      document_data              = wa_doc_chng
      put_in_outbox              = 'X'
      commit_work                = 'X'
    tables
      packing_list               = i_objpack
      object_header              = wa_objhead
      contents_bin               = i_objbin
      contents_txt               = i_objtxt
      receivers                  = i_reclist
    exceptions
      too_many_receivers         = 1
      document_not_sent          = 2
      document_type_not_exist    = 3
      operation_no_authorization = 4
      parameter_error            = 5
      x_error                    = 6
      enqueue_error              = 7
      others                     = 8.
if sy-subrc <> 0.
    write:/ 'Error When Sending the File', sy-subrc.
else.
    write:/ 'Mail sent'.
endif.

Error while sending a text file to client as attachment

I want to download a file on clicking a button. Here is my button code
<input type="button" onClick="showdownloadwindow()" value="Download My file">
The java script showdownloadwindow() should invoke a jsp that has code to construct the text file to be downloaded
Here is the javascript function
<script>
     function showdownloadwindow()
          var url = 'http://<%=request.getServerName()%>'+':'+<%=request.getServerPort()%>+'/downloadtextfile.jsp';
          window.open(url,"","");
</script>
the downloadtextfile.jsp looks something like this
<%
          response.setContentType("text/plain");
          response.setHeader("Content-disposition","attachment; filename=myfile.txt" );
          BufferedOutputStream bos = new BufferedOutputStream(response.getOutputStream());
          String temp="Put some text string for now";
          bos.write(temp.getBytes());
          bos.flush();
          bos.close();
          response.flushBuffer();
%>
i have two problems
1. when the button "Download My file" is clicked a separate window is opened and then the save file dialog box appears. How can I change my code
so that it only shows download window only ( not another browser window)
2. myfile.txt contains some error in addition to the temp string
Here is the error from myfile.txt
<BR><H3>Original Exception: </H3>
<B>Error Message: </B>SRVE0199E: OutputStream already obtained<BR>
<B>Error Code: </B>500<BR>
<B>Target Servlet: </B>/downloadtextfile.jsp<BR>
<B>Error Stack: </B><BR>
java.lang.IllegalStateException: SRVE0199E: OutputStream already obtained
<BR>
     at com.ibm.ws.webcontainer.srt.SRTServletResponse.getWriter(SRTServletResponse.java:467)
<BR>
     at org.apache.jasper.runtime.JspWriterImpl.initOut(JspWriterImpl.java:170)
<BR>
     at org.apache.jasper.runtime.JspWriterImpl.flushBuffer(JspWriterImpl.java:163)
<BR>
     at org.apache.jasper.runtime.PageContextImpl.release(PageContextImpl.java:217)
<BR>
     at org.apache.jasper.runtime.JspFactoryImpl.internalReleasePageContext(JspFactoryImpl.java:149)
<BR>
     at org.apache.jasper.runtime.JspFactoryImpl.releasePageContext(JspFactoryImpl.java:117)
<BR>
     at com.ibm._jsp._downloadtextfile._jspService(_downloadtextfile.java:93)
<BR>
     at com.ibm.ws.jsp.runtime.HttpJspBase.service(HttpJspBase.java:88)
<BR>

> Channel FILE_TLE_Sender_SalesOrder_CC: Empty document found - proceed without sending message.
> Can someone tell me why this error is happening?
Maybe your source file is empty?
This is exact what the error message says.

Sending EMail "Text-File" from Application Server!

Hi Experts,
how can I sending a Text-File from Application Server via Email?
Is there existing a Function Modul?
With Kind regards
Ersin
Moderator message: sending emails = FAQ, please search before posting.
Edited by: Thomas Zloch on Nov 25, 2010 4:23 PM

STF (Search the forum)! This type of question has been asked...and answered....many times.

How to send a text file to a printer?

Hi, I'm in dark on how to send a text file to a printer through Java Stored Procedure.
Here are what I tried so far (OS: win 2000, Oracle: 817 or 9i2):
1, Enable DOS command in Java Stored Proc. and try to send PRINT command there:
public static String Run(String Command){
try{
Runtime.getRuntime().exec(Command);
System.out.println("Command: " + Command);
return("0");
catch (Exception e){
System.out.println("Error running command: " + Command +
"\n" + e.getMessage());
return(e.getMessage());
public static void main(String args[]){
if (args.length == 1)
Run("print /D:\\\\enterprise\\john " + args[0]);
else System.out.println("Usage: java OSCommand filename");
PL/SQL wrapper:
CREATE OR REPLACE FUNCTION OSCommand_Run(p1 IN VARCHAR2) RETURN VARCHAR2 AUTHID CURRENT_USER AS LANGUAGE JAVA NAME 'OSCommand.Run(java.lang.String) return java.lang.String';
SQL command:
//print /D:\\machine\printer test.txt
I loaded the Java Stored Procedure into SYSDBS account, it failed silently, even though piece of code works fine in external JVM.
2, Use filePrinter:
public static String print(String printString) {
try{
String printerUNC = "\\\\machine\\printer";
FileWriter fw = new FileWriter(printerUNC);
PrintWriter pw = new PrintWriter(fw);
pw.println(printString);
fw.close();
return "OK";
}catch(Exception e){
e.printStackTrace();
return "Exception: " + e.getMessage();
public static void main(String[] args) {
try{
String printerUNC = "\\\\machine\\printer";
String printString = "Hello World";
FileWriter fw = new FileWriter(printerUNC);
PrintWriter pw = new PrintWriter(fw);
pw.println(printString);
fw.close();
}catch(Exception e){e.printStackTrace();}
I loaded it into SYSDBS too, and tried with this:
SQL> select MY_PRINT.PRINT('HELLO from Oracle') from dual;
MY_PRINT.PRINT('HELLOFROMORACLE')
Exception: No such file or directory
SQL> show user
USER is "SYS"
It works in external JVM too.
What's wrong with this?
Thanks for any help in advance,
Charles

Avi:
Thanks for your response!
I put the java code in SYS, 'cause I assume that account has max privilege. If the test is successful, I will move that to some user schema and then to deal with those privilege settings... But I'm unlucky.
I checked Ask Tom, this is what I got from http://asktom.oracle.com/pls/ask/f?p=4950:8:1619723::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:38012348052,%7Bprinter%7D:
... Print file from PL/SQL ...
If you are using Oracle8i, release 8.1 -- much can be done with Java. java
would be able to print directly from the server.
Looks like using Java to print out file is better than PL/SQL. But there's no more hint there! And, no new question can be asked there today either...
I'm wondering whether we can create a socket to a printer and send the characters there directly... Anyone has experience on this?
Thanks for all the help in advance,
Charles

Strange behaviour sending a text file over sockets

Hi !
Im not exactly new to Java. I discovered this behaviour when explaining to a junior.
I have a simple Server-Client architecture to send a text file. The server sends strings to client. The client checks for the string to become null, and never terminates !
Server.java
ServerSocket ss = new ServerSocket(25780);
Socket s = ss.accept();
PrintStream ps = new PrintStream(s.getOutputStream());
BufferedReader br = new BufferedReader(new InputStreamReader(s.getInputStream()));
BufferedReader fis = new BufferedReader(
               new InputStreamReader(
                    new FileInputStream(filename)));
while((read = fis.readLine()) != null){
     ps.println(read);
client.java
Socket s = new Socket(IP,port);
PrintStream ps = new PrintStream(s.getOutputStream());
BufferedReader br = new BufferedReader(new InputStreamReader(s.getInputStream()));
String read = new String();_
*while((read = br.readLine()) != null){*_
System.out.println(read);_
Can you tell me what mistake I'm making?

Thank you so much for the reply !
All blocks are within try-catch. I didn't post the whole code since you would find it inconvenient !
I tried flushing the stream ! Still doesnt work !
I guess it might help to post the entire source:
CLIENT.JAVA
    public static void main(String[] args) {
     try{
         System.out.println("Client");
         int port = 25780;
         String IP = new String("127.0.0.1");
         Socket s = new Socket(IP,port);
         PrintStream ps = new PrintStream(s.getOutputStream());
         BufferedReader br = new BufferedReader(new InputStreamReader(s.getInputStream()));
         String command = new String();
         String filename_to_recv = "from_ser.txt";
         command = "GET "+filename_to_recv;
         ps.println(command);
         String received = new String();
         String read;
         while((read = br.readLine()) != null){
          System.out.println(read);
         String filename_to_send = "from_cli.txt";
         System.out.println("recd data from server");
         command = "PUT "+filename_to_send;
         ps.println(command);
         BufferedReader filereader = new BufferedReader(
                             new InputStreamReader(
                              new FileInputStream(filename_to_send)));
         String to_send = new String();
         while((to_send = filereader.readLine()) != null){
          ps.println(to_send);
         try{
           Thread.sleep(2000);
         } catch(Exception e){
          System.out.println(""+e);
          e.printStackTrace();
     } catch(Exception e){
         System.out.println(""+e);
         e.printStackTrace();
SERVER.JAVA
   public static void main(String[] args) {
     try{
         System.out.println("Server");
         ServerSocket ss = new ServerSocket(25780);
         Socket s = ss.accept();
         PrintStream ps = new PrintStream(s.getOutputStream());
         BufferedReader br = new BufferedReader(new InputStreamReader(s.getInputStream()));
         String command = br.readLine();
         String filename = command.substring(command.indexOf(' ')+1);
         File f = new File(filename);
         BufferedReader fis = new BufferedReader(
                        new InputStreamReader(
                         new FileInputStream(filename)));
         String read;
         while((read = fis.readLine()) != null){
          ps.println(read);
         ps.flush();
         System.out.println("waiting for client data");
         command = br.readLine();
         while((read = br.readLine()) != null){
          System.out.println(read);
     } catch(Exception e){
         System.out.println(""+e);
         e.printStackTrace();
    }

Sending a text file

hi
please can any one tell me if I want to send a text file residing on my mobile to another mobile using SMS how is it possible
I already hv a j2me application tht can send a text message.
I want a program tht will send this whole .txt file and the other end receives it as a text file
thanx
forumm

hi
can I split a text file and reassemble it using j2me
or I send the text in the file using the usual sms
and if I need to split the text file please can u give me some reference where I can find information about how to do that
thanx a ton
Forum

Scenario or adapter to sending a text file to different target directories

Hi experts
In XI 3.0 I have developed a file2file scenario that takes a comma-separated file (*.csv) and converts it and returns a text file that is sent to a specific directory, the name input file determines the Target Directory, for each input file there is a sender channel and receiver channel that put the output file in the Target Directory. The problem is that i have many channels and not know how to make only one sender channel which takes the input file and the receiver channel to sends the output file to the destination directory through the file name. e.g. VTAS03.csv file located in target directory //work becomes in Clients.txt file in the directory //sap03 ie //work/VTAS03.csv --> //sap03/Clients.txt while the file VTAS05.csv must go to the directory //sap05 i.e. //work/VTAS05.csv --> //sap05/Clients.txt, //work/VTAS07.csv --> //sap07/Clients.txt so on.
In short the output file name is the same for all but must go to different directories according to the input file name without using as many channels of communication.
Someone can help me or tell me how to do this?
Thanks

Liz,
Please use the below steps if you are considering of using mapping program.
Select the check boxes for the following Adapter Specific Message attributes in
Sender Channel - FILE
Receiver Channel - DIRECTORY
Put the file name as Clients.txt in receiver channel , and directory name can be anything like TEST
DynamicConfiguration conf = (DynamicConfiguration) container
    .getTransformationParameters()
    .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(
    "http://sap.com/xi/XI/System/File",
    "Directory");
DynamicConfigurationKey key1 = DynamicConfigurationKey.create(
    "http://sap.com/xi/XI/System/File",
    "FileName");
String temp = conf.get(key1);
String src_filname = temp.substring(4,5) //This is used to get the last two digit value from the file name
String tar_dir = "//sap"+src_filename+"/";
conf.put(key,tar_dir);
return "";
I hope the above suggestion solves your problem!
Thanks!

Is SAP capable of sending a TEXT file in different modes like DOS ?

Is SAP capable of sending a TEXT file (.txt) in different modes like DOS ?

Yes SAP is capable to send .txt file in different mode.
For this you have to maintain the setting of Code page and encoding. There so may types of encoding (UTF-8, UTF-8 without BOM, UTF-16 etc) supported by SAP. You can check them from SAP logon pad.
If you are creating the file on application server then you can also mentioned encoding statement in OPEN DATASET statements.
For more details check open dataset statement.

How to send a text file as jsp response

Hi
I want to send a text file/or other file as jsp response ..How to do it..
Pls tell me if any body knows about it..
thanks

Hmmm im no expert but i think you would have to convert it to a byte array and use OutputStream with the response ... not sure ...like i said, im no expert

Powershell script - how to read a registry hive and store the value in text file and then again read the text file to write the values back in registry

Hi All,
powershell script Method required to read a value from registry and then taking the backup of that values in some text file.
For example the hive is
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment\Path
and under path i need to take back up of values in some text file and then put some value in the registry after back is taken in text file.
Also how to read the text file values so that we can again write to registry hive back from the back up text file.
Your help is much appreciated.
Umeed4u

I think you need to read this first:
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/a0def745-4831-4de0-a040-63b63e7be7ae/posting-guidelines?forum=ITCG
Don't retire TechNet! -
(Don't give up yet - 12,830+ strong and growing)

Sending the text file in ECC 6.0

Similar Messages

Maybe you are looking for