Sending to a group: Which address for member with multiple addresses?
Hi. I've created a Group of people to send emails to. Some of these people have more than one email address. How do I change the default email address for individuals within a group?
Thanks!
Searching for "group address" (without the quotes) in Address Book Help would lead you to the following article:
Selecting which addresses to use for members of a group
iMac G5 17" (iSight) Mac OS X (10.4.4)
Similar Messages
-
How to set default email address for contact with multiple addresses.
Apologies if this has been asked before, it seems a very basic question but I'm unable to find an answer.
Can a default address be set in Address Book for a contact with multiple addresses? Or if not, which address does it send to "automatically" when this condition exists? I know you can manually select the address you want to use, but what if the contact is added to a group?
Thanks
DenisThanks for the reply, buy I have no idea what this means.
I have the same question. I have a contact that has five email addresses. When I add the person to a group, Mail automatically selects one of the addresses, but not the one I want. I need to go back and manually select the correct address. Can't I select one of these addresses as the default to be used all the time?
Apologies for not quite understanding the first reply. -
Choosing an email address on contacts with multiple addresses
Has anyone found a way, using Siri, to choose which email address to send to when a contact has multiple addresses? She asks which address would you like me to send the message to and I have found no way to verbally choose and address.
You cannot rename the labels in Outlook except by modifying the Contact form. Which, as a developer, I can do. However, my fear is that it won't be pushed to the iPhone since they already have unique identifiers now and they are only showing up on the iPhone as "email". While it may be that Exchange only labels them as email Android devices equate E-mail to Business Email and E-mail 2 as Home Email by default.
Maybe the next iterration of Siri will allows us to chose first, second, or third.
Thanks for trying! -
User's default email address for use with Answers
How to use user's default email address for use with Answers?
When I was referring to the Admin Guide I found the below description for email session variable.
Can somebody please help me with this.
Contains the user's default email address for use with Answers. If the delivery option of Answers is enabled, an email device using this address will be created for the user upon first log in. Users can override this address by changing their account settings in Oracle BI Presentation Services.
Thanks,
SwethaI think the documentation is wrongly saying that it will be used by Answers. The email will be used by Delivers, the BI Scheduler component.
-
How to Restrict Single Delivery Date for PO with Multiple Line Items
Dear Experts,
How to Restrict Single Delivery Date for PO with Multiple Line Items.
System needs to through Error Message if User Inputs Different Delivery Dates for PO with Multiple Line Items in ME21N Tcode.
Can we achive this by Some Enhancement in SAP or Not ???
If so how to do it.
Any Inputs is highly appreciated.
Thanks and Regards,
Selvakumar. MHi Selvakumar,
we can resrict the PO to have a single delivery date in all the line items by means of giving a error message or overwiting the delivery date keyed/determined in the line item.
You can use the BADI -> ME_PROCESS_PO_CUST. In which you need to implement the method PROCESS_SCHEDULE.
(for technical aid - This method will be called for each and every PO line item, From the imporing parameter im_schedule we can get all the details of current PO line, even we can change the data in the current PO line. )
Regards,
Madhu. -
Partial goods receipt for PO with multiple line items
Hello All,
While doing MIGO, for a PO with multiple line items, if one line item is having error, will we be able to go ahead with goods receipt? Or entire material document is blocked for doing MIGO?
We will be doing a development - in case if there is problem in goods receipt (checking of any parameter, and if it is missing - we will be posting error message)...is it possible to ahead with next line item and still post the material document?
If partial goods receipt if possible for PO with multiple line items, how do we do it?
Regards,
RJSHi
While doing MIGO, for a PO with multiple line items, if one line item is having error, will we be able to go ahead with goods receipt? Or entire material document is blocked for doing MIGO?
No. You cannot post the MIGO, if even one of the PO line item is having problem or giving error.
We will be doing a development - in case if there is problem in goods receipt (checking of any parameter, and if it is missing - we will be posting error message)...is it possible to ahead with next line item and still post the material document?
If you skip a line irem and do GR with next line item, how will you match quantity & value with the vendor Invoice at LIV ?
If partial goods receipt if possible for PO with multiple line items, how do we do it?
Partial goods receipt is possible for PO line items. That means, if PO has 100 qty for line item 1 then you can do GR for 50 now and 50 later depending on the vendors delivery.
Hope this is what you mean by "Partial Goods Receipt".
Edited by: Arun R on May 10, 2010 2:03 PM -
ARP table not populating mac address for previously reachable IP address
Router has been online and working fine with one BGP neighbor for almost 2 years and no downtime. 2 weeks ago, added a 2nd BGP peer. Everything worked fine for 2 weeks, then all of a sudden yesterday the 2nd BGP peer is disconnected and does not come back. ISP checks and sees everything looks fine on their end. We cannot even ping each other now.
Upon investigation, the ARP table is not even populating the MAC address for the BGP peer IP anymore (same local subnet). Stays "incomplete" in the table no matter what we do, including clearing arp table, changing IP address, etc.
Plug a laptop directly into the 2nd BGP peer FE port and replicate the IP addressing. Laptop cannot ping Router, but Router CAN ping laptop. Check ARP table, but STILL no mac address assigned and now not even the ARP table showing "incomplete".
Thinking it could be the FE interface, switch to the 2nd FE interface and perform same laptop test, this time with arbitrary IP addressing. Now cannot ping each other, no MAC in ARP table.
End up rebooting the router and lo-and-behold, everything is working normally again. 2nd BGP peer peers up instantly.
I should also mention that the 1st BGP peer worked flawlessly throughout, taking all the Internet load and having no issues throughout.
Also, the FE ports for the 2nd BGP peer are on an HWIC FE card plugged into the router. The 1st BGP peer is plugged into the built-in GE interface. 2901 running: c2900-universalk9-mz.SPA.151-4.M4.bin
Lastly, no router resource issues, no error messages, no logs. Just the BGP peer disconnecting.
I have never, in 20 years working with Cisco routers seen something like this before. This is the most fundamental aspect of IP and Ethernet that was not working.
Has anyone ever seen this behavior before??
Here is the router config (IP's changed):
version 15.1
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service internal
service sequence-numbers
boot-start-marker
boot-end-marker
logging buffered 150000
aaa new-model
aaa authentication login LAUTHEN local
aaa authentication login TAUTHEN local group tacacs+ enable
aaa authorization console
aaa authorization exec LAUTHOR local if-authenticated
aaa authorization exec TAUTHOR local group tacacs+ if-authenticated
aaa session-id common
clock timezone PST -8 0
clock summer-time PDT recurring
no ipv6 cef
no ip source-route
ip cef
no ip domain lookup
multilink bundle-name authenticated
username ubiadmin privilege 15 secret 4 .JbeuWXuZvchrG0OL.5BftFtqrrEyxcnVHn5rIuCnTk
username umitsnoc01 privilege 15 secret 4 cUmoRUjey9O1x.wk9S.kleX.iAAhCwihupr6Z98p6OA
redundancy
ip ssh version 2
track 1 interface GigabitEthernet0/0 line-protocol
class-map match-any AutoQoS-VoIP-RTP-Trust
match access-group name SIP-Media-INBOUND
class-map match-any AutoQoS-VoIP-Control-Trust
match ip dscp cs3
match ip dscp af31
class-map match-any Customer-Voice
match access-group name Customer-VPNs
class-map match-any media
match access-group name SIP-Media
class-map match-any signaling
match access-group name SIP-Signaling
policy-map AutoQoS-Policy-Trust
class AutoQoS-VoIP-RTP-Trust
priority percent 70
class AutoQoS-VoIP-Control-Trust
bandwidth percent 5
class class-default
fair-queue
policy-map queue
class signaling
bandwidth percent 5
class media
priority percent 50
class Customer-Voice
priority percent 40
class class-default
fair-queue
policy-map shape
class class-default
shape average 10000000
service-policy queue
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
description BGP Peer 1
ip address 2.2.2.2 255.255.255.252
no ip redirects
ip flow ingress
ip flow egress
duplex auto
speed auto
service-policy output shape
interface GigabitEthernet0/1
description LAN
ip address 1.2.3.4 255.255.255.0
no ip redirects
ip flow ingress
ip flow egress
standby 255 ip 1.2.3.1
standby 255 priority 105
standby 255 preempt
standby 255 mac-address 1a2b.3c4d.5e6f
standby 255 track 1 decrement 10
duplex auto
speed auto
service-policy output AutoQoS-Policy-Trust
interface FastEthernet0/0/0
description BGP Peer 2
ip address 1.1.1.1 255.255.255.252
ip flow ingress
ip flow egress
duplex full
speed 100
service-policy output shape
interface FastEthernet0/0/1
no ip address
shutdown
duplex auto
speed auto
router bgp 7777
bgp router-id 2.2.2.2
bgp log-neighbor-changes
network 1.2.3.0 mask 255.255.255.0
neighbor 1.1.1.2 remote-as 5555
neighbor 1.1.1.2 update-source FastEthernet0/0/0
neighbor 1.1.1.2 prefix-list L3-DEFGW in
neighbor 1.1.1.2 route-map L3-LPREF-IN in
neighbor 2.2.2.1 remote-as 6666
neighbor 2.2.2.1 ebgp-multihop 2
neighbor 2.2.2.1 update-source GigabitEthernet0/0
neighbor 2.2.2.1 send-community
neighbor 2.2.2.1 prefix-list COLO-DEFGW in
neighbor 2.2.2.1 route-map COLO-LPREF-IN in
neighbor 2.2.2.1 route-map COLO-OUT out
ip forward-protocol nd
ip bgp-community new-format
ip as-path access-list 5 permit _5555_
ip as-path access-list 5 deny .*
ip as-path access-list 10 permit ^6666$
no ip http server
no ip http secure-server
ip flow-top-talkers
top 50
sort-by bytes
ip route 0.0.0.0 0.0.0.0 1.1.1.2 254 name L3
ip route 0.0.0.0 0.0.0.0 2.2.2.1 255 name COLO1
ip route 10.0.0.0 255.0.0.0 10.10.10.10 name FW_OUTSIDE
ip tacacs source-interface GigabitEthernet0/1
ip access-list standard SNMP_SOURCES
permit 12.12.12.0 0.0.0.255
deny any log
ip prefix-list L3-DEFGW seq 5 permit 0.0.0.0/0
ip prefix-list COLO-DEFGW seq 5 permit 0.0.0.0/0
ip prefix-list COLO-LPREF-OUT seq 5 permit 1.2.3.0/24
route-map COLO-LPREF-IN permit 5
match as-path 5
set local-preference 250
route-map COLO-LPREF-IN permit 10
set local-preference 150
route-map COLO-LPREF-IN permit 20
route-map COLO-OUT permit 10
match ip address prefix-list COLO-LPREF-OUT
set as-path prepend 7777 7777 7777
set community 29795:1004
route-map COLO-OUT permit 20
route-map L3-LPREF-IN permit 10
match as-path 10
set local-preference 200
route-map L3-LPREF-IN permit 20
set local-preference 150
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps vrrp
snmp-server enable traps flowmon
snmp-server enable traps transceiver all
snmp-server enable traps ds1
snmp-server enable traps call-home message-send-fail server-fail
snmp-server enable traps tty
snmp-server enable traps license
snmp-server enable traps envmon
snmp-server enable traps ethernet cfm cc mep-up mep-down cross-connect loop config
snmp-server enable traps ethernet cfm crosscheck mep-missing mep-unknown service-up
snmp-server enable traps flash insertion removal
snmp-server enable traps mac-notification
snmp-server enable traps aaa_server
snmp-server enable traps cef resource-failure peer-state-change peer-fib-state-change inconsistency
snmp-server enable traps memory bufferpeak
snmp-server enable traps config-copy
snmp-server enable traps config
snmp-server enable traps config-ctid
snmp-server enable traps event-manager
snmp-server enable traps hsrp
snmp-server enable traps cpu threshold
snmp-server enable traps rsvp
snmp-server enable traps syslog
snmp-server enable traps vtp
snmp-server enable traps ipslaWhen you were checking the ARP table was there an entry for Fast0/0/0?
HTH
Rick -
Changing Email address for BTWiFi-with-FON
Is it possible to change the username/email address for logging in to BTWiFi-with-FON as the btinternet.com email address I got lumbered with is very long (29 characters) and awkward to key in on a smartphone?
Solved!
Go to Solution.A1944 wrote:
pottyperson wrote:
Keep the phone's Wifi switched off until you actively want to use it. That will probably save on battery usage as well.
Thanks for the idea, but unfortunately that would not help as I use it on the WiFi at home quite a lot, especially when I have the PC switched off.
Sorry, I got the wrong end of the stick. You need to set the phone to prioritise wifi connections, but I don't know the procedure for iPhone as I have Android. You could try simply deleting BT WiFi from the list of connections to see if it gets a lower priority next time you connect to it.
You can click the white star next to this message if you think it was helpful. -
Which iMac for use with Photoshop CS5 and Lightroom
Any opinions on which iMac is best for use with Photoshop CS5 and Lightroom. Not sure if the 2.7 i5 with 512 graphics card is Plenty of power or if upgrading to the 3.1 i5 or 3.4 i7 is a wiser choice given the price differences. Appreciate the help
So I was reading over your post, and even though this is older and has to do with CS5, I have some information for CS6 that will be relevant to your question now that it is time to upgade the software. In general Photoshop has always been more about RAM than Processing power, though that is important too. Until CS5 it could never quite take advantage of what multi-core processors really had to offer, and even the graphics card didn't really effect much of it outside of certain features and the 3D optio
Now that is no longer true and Adobe can effeciently use all aspects of the computer to give you much better performance.
So much so that I was able to buy a brand New ASUS with the following specs:
Dual Core 2.2GHz Processors
8GB of RAM (4GB original to the machine)
Windows 7 Home Premium 64Bit OS
320GB HDD w/ 5400RPM
This machine not only runs photoshop CS6 and Launches in less than 5 Seconds... it can run Premier and After Effects as well, and this Laptop cost me less than $400 (on sale at Best Buy 2 Weeks Ago. You don't have to buy something this cheap, but isn't it great that you can and still run Master Collection effectively?
You can read my details on how to buy a Photoshop CS6 Laptop, what specs you need, comparison between Mac and PC and watch the video of my Photoshop Speed Test by reading this article:
http://robertoblake.com/blog/2012/06/buying-a-photoshop-cs6-laptop -
PO Address for the Partner Order address.
Hi,
We have a problem with the address in the PO. We want to complete automatically the address from the partner Order address that has different address than the vendor.
So Vendor Number 1000 address in Madrid has the Partner Order address 1001 with address in Barcelona. We want to complete the address in the PO with the partner Order address from Barcelona. However the system always gets the address for the vendor in Madrid.
How can we do this process? The standard should be works like this. Otherwise we have to develop this procedure. But Are there any easy way by program to complete the address in the PO process or after that?
Thank you and best regards.the address from the OA partner is taken for the print out, where and why do you want to maintain it in the PO?
-
Mailing address for apple?, Mailing address for apple?
I called ipod support and they gave me a repair number but no mailing address. He said to just bring my ipod and the number to UPS. He also didn't mention bringing a box. Is it true that all I need is my ipod and the number? I think you'd need a box and address.
They should be sending YOU a box with a return shipping label. I am assuming you provided them with your address to send this information to? If not, I would recommend contacting them again to clear this up.
B-rock -
One Vendor With Multiple address
Hi,
We have a scenario, we have one vendor which has multiple adresss. Means one address for correspondence (PO, reminder etc) another address for sending payment etc.
How to map in sap.
Regards
Ishu>
ishu 2002 wrote:
> Thanks all of you for the answer, but my problem is that We don't want to open new vendor for partner function. We want to use the same vendor code for both the addresses.
> Regards
> Ishu
SAPs design solution is to use partner functions.
There is no other solution in SAP that could make your wish become true. -
Smart mailbox with multiple addresses
It seams that creating a Smart Mailbox with "From" multiple addresses (comma separated) conditions works with INBOX emails... but the same idea does not work if it applies to SENT emails... any help?
Hi Sanjay,
Outlook would resolve the SMTP to Displayname if object is found in the GAL, hence no option for you to get that directly visible to the user, if he is accessing the email there.
Quick way to find out would be checking the header info on the email
To: Field should essentially contain the email ID to which email was directed to.
As an admin you can check this on the message tracking logs for the user.
Sample Message Header below:
Message-ID: <[email protected]>
Received: from [158.143.113.49] by web60003.mail.yahoo.com via HTTP; Tue, 15 Jul 2003 12:14:24 BST
Date: Tue, 15 Jul 2003 12:14:24 +0100 (BST)
From: "Daniel Simpson" <[email protected]>
Reply-To: <[email protected]>
Subject: Test Email
To: <[email protected]>
MIME-Version: 1.0
Content-Type: multipart/alternative;
boundary="0-710479544-1058267664=:1719"
Content-Transfer-Encoding: 8bit
Return-Path: <[email protected]>
Regards,
Satyajit
Please “Vote As Helpful”
if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you. -
Exchange 2010 - Selecting display names for users with multiple mailboxes
Hi all,
This isn't so much of a problem, but more of a "What is the best way to handle this" sort of thing.
I have a client with Exchange 2010 and multiple domains. Because they must be able to send as each domain, I have them setup with individual accounts/mailboxes for each domain. We're at a point that they have three domains which means three accounts per
user and three listings in the GAL. Their original accounts shows up as Smith, John. The second domain added shows up as First last. I'm at a loss what to use for the third. They want each account to show up in the GAL so that other users can send account
specific stuff to them if needed, but I'm trying to figure out how to keep this relatively organized and not make the name on outbound emails too convoluted.
Any suggestions on a format I can use that will make these accounts stand out from each other in the GAL, but not be a hot mess on the recipient end either?Smith, John (Company A)
Smith, John (Company B)
Smith, John (Company C)
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems." -
Credit memo for returns with multiple reference deliveries
Hi Experts,
I have few credit memos for returns with multilple return orders and return deliveries in document flow.
I want to find out where do we configure this setting in which there will be single credit memo for multiple deliveries.
And how system decides the common factors in deliveries for this credit memo?
Please guide.
-Chetan Barokar.Hi,
In copy control settings of delivery document to billing document you can maintained the requirement routine Data VBRK/VBRP as 03 - Single invoice for an item category, as theinvoice spliting will be control from copy control.
with regards
Vivek.
Maybe you are looking for
-
SDE_ORAR1213_Adaptor.SDE_ORA_GLBalanceFact_Full
Dears, when im trying run full load in finance analysts via dac, im getting error, Log file for your reference. DIRECTOR> VAR_27028 Use override value [DataWarehouse] for session parameter:[$DBConnection_OLAP]. DIRECTOR> VAR_27028 Use override value
-
En: how to install any windows on macbook pro (early 2011) (os x mavericks)? Ro: *** se instaleaza orice windows pe macbook pro (early 2011) (os x mavericks)? Help Me Please
-
New System Can't Get Gnome3 Working
I've been following the Wiki Beginers Guide for installing Gnome3 on a new system and for some reason now this is the 2nd time it's failed: I've installed: - xorg-server - xorg-xinit - xorg-utils - xorg-server-utils - dbus - ttf-dejavu - gnome - gdm
-
Hi, I am trying to read the pdf file that have chinese characters. I am using iText. But when I read them, it will give me hex string for those characters. I had tried too much variations to retrieve those chinese characters by applying different enc
-
After importing an existing DC in Developer Studio I cannot see the folder DC Metadata in Web Dynpro Explorer window. Originally the DC was created in SAP Netweaver Developer Studio 2.0.11, while I'm importing it in SAP Netweaver Developer Studio 2.0