Sending to external editor does not send adjustments

Hi all - having an issue sending to more than one external editor.
I send to a NIK plugin (color efex), apply a fillter and then save.
After that I may want to send to Photoshop.
If I make any ajustments in Aperture (to the filtered file - the new TIFF master) before sending to the second external editor thos adjustments will be ignored.
For example -
I start with a RAW file. I make adjustments in Aperture. All Good.
I send this to Color Efex and give it a cross process. Save.
Back in Aperture i now have a TIFF file (cross processed).
If I then (for the sake of this example) completely desaturate the color (now its black and white) and then send this TIFF to photoshop using the send to external editor command the image in photoshop will be *color* - with the cross processing on it.
If I cancel this and then go back to Aperture and send the Black and White Picture to Colour effects again, it's also not black and white.
In summery the adjustments made after the first "send to external editor" do not carry to the second "send to external editor"
(It should be noted that any adjustments made before the first "send to external editor" do in fact carry to the external editor. It's only the second round that does not.)
Am i looking at a bug here?
Any others had this experience.

Here is an Apple provided tip for working with Photoshop as an External Editor (which by extension currently applies to any use of third-party software used to edit images in conjunction with Aperture).
http://support.apple.com/kb/HT5128
Hope this helps.
Message was edited by: CorkyO2 to add link

Similar Messages

Edit in External Editor does not work

Hi,
I added as External Editor Photoshop CS3, but no matter what option I chose as file format, bit depth or color space, Lightroom will always apply the defaul setting in "Edit in Adobe Photoshop CS3" preference tab, rather than the one I select.
Do you know how to sort this problem out?
Thanks

Apparently Adobe associates the Edit In settings with the physical path of the executable so you cannot specify two sets of settings with one EXE; however, you can trick it into working by making a copy of the executable with a different name, and associate that second copy with the secondary Editor. I copied Photoshop.exe to Photoshop_.exe and the settings can be independently specified.

External Editor does not recognize LR changes

I have PS CS5 installed, and after moving to LR4 I find that editing from LR to PS does not carry over all the changes made in LR. The crop is retained, but all lighting and color changes are not. AND, I can't get to the screen the asks you if you want to edit a copy with or without LR changes. So I'm stuck. Any thoughts?
Thanx

Chuck Bragg wrote:
Thanks to both of you for the answer. It is a bit tricky finding the 6.7 update - the regular update page only goes to 6.6.
It's because it's still a RC. Once the official release is made available, the update will occur as usual.

Send.Asp File error does not send html form

Hi,
on my site I have a "contact us" page that contains an html form which I would like to be sent to a specific email once the user clicks on "send".
I'm trying to do so with POST action connected to send.ASP file. but I keep getting this erro:
CDO.Message.1 error '800401e4'
Invalid syntax
/send.asp, line 15
Here is the Send.ASP code:
<%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
</head>
<body>
<%
Set myMail=CreateObject("CDO.Message")
myMail.Subject="Message from site"
myMail.From="[email protected]"
myMail.To="[email protected]"
myMail.CreateMHTMLBody "Name: " + Request.Form("Name") + " tel no: " + Request.Form("Tel_code") + Request.Form("Tel") + " Cell no: " + Request.Form("Cell_code") + Request.Form("Cell") + " Email: " + Request.Form("Email") + " Subject: " + Request.Form("Subject") + " message: " + Request.Form("Substence")
myMail.Send
set myMail=nothing
%>
</body>
</html>
here is my html form code:
שם פרטי ומשפחה
דואר אלקטרוני
טלפון
02
03
04
08
073
077
נייד
052
054
057
נושא
תוכן ההודעה

Hi,
on my site I have a "contact us" page that contains an html form which I would like to be sent to a specific email once the user clicks on "send".
I'm trying to do so with POST action connected to send.ASP file. but I keep getting this erro:
CDO.Message.1 error '800401e4'
Invalid syntax
/send.asp, line 15
Here is the Send.ASP code:
<%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
</head>
<body>
<%
Set myMail=CreateObject("CDO.Message")
myMail.Subject="Message from site"
myMail.From="[email protected]"
myMail.To="[email protected]"
myMail.CreateMHTMLBody "Name: " + Request.Form("Name") + " tel no: " + Request.Form("Tel_code") + Request.Form("Tel") + " Cell no: " + Request.Form("Cell_code") + Request.Form("Cell") + " Email: " + Request.Form("Email") + " Subject: " + Request.Form("Subject") + " message: " + Request.Form("Substence")
myMail.Send
set myMail=nothing
%>
</body>
</html>
here is my html form code:
שם פרטי ומשפחה
דואר אלקטרוני
טלפון
02
03
04
08
073
077
נייד
052
054
057
נושא
תוכן ההודעה

PS cc as External Editor does not add to catalog

In LR 5.2, when I edit a NEF in PS cc and save it to the same location as a jpg, the jpg appears in the catalog. If it is sorted by capture time it is next to the original nef.
In LR 5.3 the jpeg is not added to the catalog. It can be seen in File Manager in the same folder. It is not stacked.
I am sorry if this is a duplicate question.

You can only have one app set as an external app.
To change your choice you simply select Topaz again and the window will open to allow you to select.
Regards
TD

External editor does not add

Although I have Pixelmator and Photoshop CS4, neither are a drop-down option in ext editor pull down.... Topaz is. Any idea how to get the program to "see" that I own CS4 and Pixelmator to add these?

You can only have one app set as an external app.
To change your choice you simply select Topaz again and the window will open to allow you to select.
Regards
TD

External editor does not open picture file

osx 10.8.2
iphoto 11
photoshop elements 11
i have set pse as my default editor in iphoto. when i double click a photo to edit, PSE 11 launches, but there is no photo displayed.
i have a similar query in the adobe forum.
and as an aside, where the heck are the picture files after i import them from my camera or phone?
thanks

You are selecting the wrong file in the PSE 10 folder as the file to use. It should be the one inside the Support file folder:
OT

The Lightroom external editor does not find Photoshop CC. What is the fix.

I have deleted the old preferences file and relaunched Lightroom with no success. I then uninstalled and reinstalled Lightroom 5.2 with no success. What is the fix.

Have you gone to LR preferences or just right clicked on the image?
I think if you go to LR preferences>external editing, you will successfully be able to enter a custom preset to PS CC, which should then be available when you right click.
Wortht a try...

HT4798 i created my apple id account, verified but know i m unable to log on, it says incorrect password, i tried to reset via forgot password option but it does not send reset password page to my e- mail address, how can i get this sorted or delete my pr

User created apple id account, verified but know she is unable to log on, it says incorrect password, she tried to reset via forgot password option but it does not send reset password page to here e- mail address, how can i get this sorted? or how can i get her whole apple account deleted and created new one using same e - mail address?

The idea to jumpstart by change was not the smartest one, but gives you an opportunity to use that "temporary" account as permanent. You do not have a choice cause obviously despite you thinking that old account is no more -it does exist on Apple servers. And if you are unwilling to share your [email protected] with friend, just create one extra [email protected] for your friend. One suggestion - do not use gmail.

I have another apple ID but I forgot the password and apple does not send the link to reset it to my email. What do I do to have it back?

I have another apple ID but I forgot the password and apple does not send the link to reset it to my email. What do I do to have it back? It is really important.

If you know the answers to your security question for the ID you can use that method to reset the password rather than email (by going to https://iforgot.apple.com/password/verify/appleid).
If you don't, you'll have to contact iTunes Store support for assistance: http://www.apple.com/emea/support/itunes/contact.html. They frequently deal with Apple ID issues.

Mail does not send email

My problem is simply that Mail does not send email.
I have just migrated from iMac G5 to iMac Intel by using Migration Assistant. Everything else works just fine and I can receive email. However, if I try to reply, forward or send a new email message, Mail just does not do anything - no error message, nothing.
The fixes I have tried so far are removing the Mail plist file, repairing disk permissions and mailboxes. Of course, I have checked the account settings, especially outgoing server settings. I also reinstalled Mail application with Pacifist. None of this has solved the problem. I have tried sending email with Thunderbird and it works with no problems.
Does anybody have any suggestions how to fix this issue?
The OS is 10.4.8, Mail Version 2.0.6 (749.2/752.3), all the suggested software updates done.
iMac Core Duo 20" 2GHz Mac OS X (10.4.8)

Reinstalling Mail is rarely necessary or appropriate to solve a problem. It certainly cannot fix anything that could be wrong within your home folder or at the server or with the network, and may even introduce new issues if not done properly. Moreover, in Mac OS X 10.4 you don’t need Pacifist to reinstall Mail, you could also do it as described in the following article:
Custom installs in Mac OS X 10.4
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all filesystem issues, if any, if the version of the system software on your install disks is earlier than what you’re using now (and only in that case), then you must also reinstall the Combo Update for the type of computer and the version of Mac OS X you’re using, to bring Mail back in sync with the rest of the system:
About the Mac OS X 10.4.8 Combo Update
Mac OS X 10.4.8 Combo Update for PPC
Mac OS X 10.4.8 Combo Update for Intel
The above won’t solve the problem. It’s just to ensure that you’ve properly reinstalled Mail, which you shouldn’t have done, and which apparently you didn’t do properly -- the version of Mail on your system should be 2.1.1, not 2.0.6.
The original problem could be caused by some Launch Services cache or preferences corruption. The following article describes how to manually reset Launch Services -- the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, this other article provides links to some utilities that can be used for troubleshooting and cache cleaning:
Resolving Disk, Permission, and Cache Corruption
It seems that the most appropriate utility for solving this particular problem is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Click Maintenance. In the Reset section, check LaunchServices database.
4. You may uncheck any other pre-checked options if you wish.
5. Click the Execute button.
6. Restart the computer.

My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no lo

My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no log in required.
After trying lots I found now in 'Airport Utility is 'unable to detect any airport wireless devises.....'
There is no provider to be seen in airport utility and only 'rescan' is an option with no results...
even so I am connected and can browse the net receive mail etc. and the outgoing 'mail server' is set to the internet provider I am connected to.
Can you enlighten me what can I do I need to use my e-mail program urgently !!!
Thanks for your help

I'm not sure what "IPS wireless" is, but unless you have an Apple Wi-Fi base station (such as a Time Capsule, AirPort Extreme, or AirPort Express), AirPort Utility won't see anything.
You might try defining a new SMTP server to see if that will work any better.
By the way, the subject field for these messages isn't intended to hold a lot of text. Put a short description of your problem in the subject field and save the rest of your message for the body field.

After Migration Exchange 2013 does not send mail outside the organization

Dear,
After Migration Exchange 2010 to exchange 2013. We does not send email from the organization but we can received mail from others organization.
Delivery has failed to these recipients or groups:
[email protected] ([email protected]) The server has tried to deliver this message,
without success, and has stopped trying. Please try sending this message again. If the problem continues, contact your helpdesk.
Diagnostic information for administrators:
Generating server: OGMAIL.domain.net Receiving server: gmail.com (2607:f8b0:400c:c01::1a)
[email protected] 6/11/2014 10:16:10 AM - Remote Server at gmail.com (2607:f8b0:400c:c01::1a) returned '550 4.4.7 QUEUE.Expired; message expired' 6/11/2014
10:03:49 AM - Remote Server at gmail.com (2607:f8b0:400c:c01::1a) returned '441 4.4.1 Error encountered while communicating with primary target IP address: "Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted failover
to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts. The last endpoint attempted was 2607:f8b0:400c:c01::1a:25'
Original message headers:
Received: from OGMAIL.domain.net (192.168.10.12) by ogmail.domain.net
(192.168.10.12) with Microsoft SMTP Server (TLS) id 15.0.847.32; Mon, 9 Jun
2014 16:13:30 +0600
Received: from OGMAIL.domain.net ([::1]) by ogmail.domain.net ([::1]) with
mapi id 15.00.0847.030; Mon, 9 Jun 2014 16:13:30 +0600
From: Administrator <[email protected]>
To: Administrator <[email protected]>
CC: IT.HW-Masudur Rahman-MRT <[email protected]>, "[email protected]"
<[email protected]>
Subject: RE: Migration batch mrtmove has completed successfully.
Thread-Topic: Migration batch mrtmove has completed successfully.
Thread-Index: AQHPd1JEcid9YEi4F0ue6m1039EwR5top+xp
Date: Mon, 9 Jun 2014 10:13:29 +0000
Message-ID: <[email protected]>
References: <[email protected]>
In-Reply-To: <[email protected]>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
x-originating-ip: [192.168.10.2]
Content-Type: multipart/alternative;
boundary="_000_6b0d846f503942d99d44be9aff8d6adfogmaildomainnet_"
MIME-Version: 1.0
Queue viewer:
Identity: ogmail\8786\3470333575194
Subject: testing
Internet Message ID: <[email protected]>
From Address: [email protected]
Status: Active
Size (KB): 4
Message Source Name: SMTP:Default OGMAIL
Source IP: 192.168.10.12
SCL: -1
Date Received: 6/23/2014 3:22:49 PM
Expiration Time: 6/25/2014 3:22:49 PM
Last Error:
Queue ID: ogmail\8786
Recipients: [email protected];2;2;[{LRT=};{LED=};{FQDN=};{IP=}];0;CN=SendMail,CN=Connections,CN=Exchange Routing Group (DWBGZMFD01QNBJR),CN=Routing Groups,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First Organization,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domain,DC=net;0
Md. Ramin Hossain

What I notice is Queue expired. The message is not going out.
Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts.
This error states that It tried to connect to the target system but failed to connect out.
Is Exchange 2013 server added in the firewall rule to send communication over port 25?
Do you have use Front end proxy checkbox checked on the Send connector to internet that was created on 2013 (if created)?
If use front end proxy checkbox is checked, then you need to add permissions for your CAS server's IP in the Firewall for outbound port 25 rule. As it appears that the mail is originating from CAS to the firewall. If that checkbox is not checked, we need
to add the Mailbox server's IP on the outbound rule for port 25.

TS3276 when I re-send an e-mail with an attachment it does not send the attachment just the name of the file what can I do to have it re sent complete??? thanks

Something happened to my laptop. I try to resend e-mails with files and just sends the email with the file name, does not send the file. what can I do to fix this??? thanks

In Mail, go to:
Edit > Attachments
and check "Include original attachments in reply" in Mail's menu.

ICloud IMAP server does not send the CAPABILITY with CRLF

IMAP iCloud server does not send the CAPABILITY response with CRLF appended as per RFC 3501. Please find the log snippet
11-05 10:50:52.462 29603 29988 D Email : open :: socket openjava.io.BufferedInputStream@43a726a8 | java.io.BufferedOutputStream@43a72b68
11-05 10:50:52.502 29603 29988 D Email : <<< #null# ["OK", ["CAPABILITY", "st11p00mm-iscream023", "1S", "XAPPLEPUSHSERVICE", "IMAP4", "IMAP4rev1", "SASL-IR", "AUTH=ATOKEN", "AUTH=PLAIN"], "iSCREAM ready to rumble (1S:1092) st11p00mm-iscream023 [42:4469:15:50:53:39]"]
11-05 10:50:52.502 29603 29988 D Email : >>> 1 CAPABILITY
11-05 10:50:52.552 29603 29988 D Email : <<< #null# ["CAPABILITY", "st11p00mm-iscream023", "1S", "XAPPLEPUSHSERVICE", "IMAP4", "IMAP4rev1", "SASL-IR", "AUTH=ATOKEN", "AUTH=PLAIN"]
11-05 10:50:52.562 29603 29988 D Email : <<< #1# ["OK", "!!"]
11-05 10:50:52.582 29603 29988 D Email : >>> [IMAP command redacted]
11-05 10:50:52.682 29603 29988 D Email : <<< #2# ["OK", ["CAPABILITY", "XAPPLEPUSHSERVICE", "IMAP4", "IMAP4rev1", "ACL", "QUOTA", "LITERAL+", "NAMESPACE", "UIDPLUS", "CHILDREN", "BINARY", "UNSELECT", "SORT", "CATENATE", "URLAUTH", "LANGUAGE", "ESEARCH", "ESORT", "THREAD=ORDEREDSUBJECT", "THREAD=REFERENCES", "CONDSTORE", "ENABLE", "CONTEXT=SEARCH", "CONTEXT=SORT", "WITHIN", "SASL-IR", "SEARCHRES", "XSENDER", "X-NETSCAPE", "XSERVERINFO", "X-SUN-SORT", "ANNOTATE-EXPERIMENT-1", "X-UNAUTHENTICATE", "X-SUN-IMAP", "X-ANNOTATEMORE", "XUM1", "ID", "IDLE"], "User test logged in"]
11-05 10:50:52.682 29603 29988 D Email : >>> 3 CAPABILITY
11-05 10:50:52.742 29603 29988 W Email : Exception detected: Expected 000a (
)1-05 10:50:52.742 29603 29988 W Email : ) but got 000d (
This is happening only when CAPABILITY command is sent follwed by LOGIN command. Please check this issue.

If you want your mail delivered properly the Official Host Name of the sending server should match the PTR (reverse DNS) of the sending IP Address, and there should be an "A" record that matches the OHN as well.
Example:
mail.yourdomain.com (Official Host Name) on 123.123.123.123
PTR for 123.123.123.123 should match mail.yourdomain.com
There should be an A record in yourdomain.com pointing to 123.123.123.123
Kostas

Sending to external editor does not send adjustments

Similar Messages

Maybe you are looking for