Sending to multiple addresses and using BCC

I'm using Mail and Address book to send a basic email (no images or anything like that) to my mailing list. I beleive my server (Sympatico) has a restriction on the number of recipients - 99. But I'm sending to less than that. When I put the addresses in the CC field, it worked. When I use the BCC field it doesn't.
Any ideas?
What are others using on a Mac for mailing list emails?

Mike,
This has all the familiar earmarks of this old problem -- don't know what else to tell you.
Is there much difference in the number of addresses in the two lists, as you have broken them up?
Something I have seen to cause this, is when some people send, and their actual email address sort of appears twice, at least in part, in their From Header. If this were saved to the AB, then could be a problem. This is more or less like their email address taking the position of the Full Name info.
Ernie

Similar Messages

  • How do i delete my primary email address and use one of my alternate email adresses as my primary email address

    how do i delete my primary email address and use one of my alternate email adresses as my primary email address

    Hey freightguy,
    It sounds like you want to change your Apple ID. Follow the steps in this link to do so:
    Before you change your Apple ID:
    Sign out of all Apple features and services that you use with your current Apple ID.
    Make sure that the email address you want to use for your Apple ID meets these conditions:
    The email address is one that you use regularly, because it will be the primary email address for your Apple ID.
    The email address is not associated with any other Apple ID.
    The email address is not an iCloud email address, which is already an Apple ID. iCloud email addresses end with @icloud.com, @me.com, or @mac.com.
    To change your Apple ID, follow these steps:
    Go to My Apple ID (appleid.apple.com), click "Manage your Apple ID", and sign in.
    If you have two-step verification turned on, you'll be asked to send a verification code to the trusted device associated with your Apple ID. If you are unable to receive messages at your trusted device, follow the guidelines for what to do if you can't sign in with two-step verification.
    In the "Apple ID and Primary Email Address section," click Edit.
    Enter the email address you want to use, then click Save Changes. Apple will send a verification email to that address.
    Open the email from Apple, then click Verify Now in the email.
    When the My Apple ID page opens, sign in with your renamed Apple ID.
    If you have two-step verification turned on, you'll be asked to send a verification code to the trusted device associated with your Apple ID.
    After you see a message indicating that verification is complete, remember to update all of the stores and services that you use with your Apple ID.
    from:
    Apple ID: Changing your Apple ID
    http://support.apple.com/kb/HT5621
    If you're instead talking about changing the signed in email address you're using for the Mail app on your iPhone, check out the steps in here:
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    Have a great day,
    Delgadoh

  • I want to change my primary email address, and use one already associated with my account why can I not do this ?, I want to change my primary email address, and use one already associated with my account why can I not do this ?

    I want to change my primary email address, and use one already associated with my account why can I not do this ?, I want to change my primary email address, and use one already associated with my account why can I not do this ?  I don't want to create another one if I really don't need to
    Any ideas ?

    I'm afraid that once an address has been associated with an Apple ID you can't re-use it in any way. You will have to create another address (such as a free on from GMail or Yahoo for example).

  • How can i send pictures from iphoto and use entourage

    how can i send pictures from iphoto and use entourage. I use to do it when I used Mac OS Leopard

    Click on the image in question and execute COMMAND D which will copy an image in iPhoto.
    To delete an image in iPhoto, execute COMMAND DELETE.
    Ciao.

  • HT1918 how do i delete an old email address and use a new one as my primary?

    how do i delete a primary email address and use a new one?

    Stop using the old one and start using the new one. Notify all your friends, family, etc. of the change in email address.
    iTunes Store: Changing Account Information

  • Configure WRT54G Wireless Router with PUBLIC IP address and use DHCP for internal computers

    Hi,I have an Internet online service with 5 public IP addresses. The router and the AP are connected to a switch. I would like to configure a WRT54G wireless router with one of this IP public Address and use DHCP (with private ip address)  for the computers that will connect to the AP. As the AP is connected to the switch it is possible that other wired computers that are connected to the same switch can obtain an IP address from the DHCP ?
     Thansk in advance
     

    Thanks for your help. Please correct me if Im wrong. After connecte the equipments the way you suggestI setup a static IP address (The public IP)  in the WRT54GI enable DHCP in the WRT54G with a range from 10.10.0.100 to 10.10.0.200 (as an example) The gateway is the Public IP address right ? How do I route the 10.10.0.x addresses to the public IP address. Thansk again 

  • Sending newsletter to multiple recipients without using bcc:

    Dear Mac users,
    I would like to send out a newsletter to multiple recipients without listing all of the email addresses in the bcc: field. I know there are mail programs that will take a list and then send an email individually to each name on the list, one after the other. Is this function possible within Mac Mail?
    Thanks in advance for all your help.

    "Use Applescript. Prepare the message as a text file, run the script, it prompts you to select the file, it prompts you to select the group, then iterates through the list of group members sending a copy of the message to each separately. You could have it so that you could drop the text file on the script, saving a prompt."
    Could you please explain that step by step. I am a new Mac user and have no idea how to use applescript or how to do that. I need to send a newsletter out to about a 130 people and want to send it to each person separately without doing it manually. I'm not sending it out as a text file though but as an image file, jpeg.
    Any suggestions would be helpful.
    Thanks for your help so far.

  • How can I send to multiple address in one email?

    In Outlook, I can send the email to multiple addresses by separating the emails with a semicolon. How can I do this using utl_mail?
    Thanks!

    Calling utl_smtp.rcpt multiple times.
    [read more|http://download.oracle.com/docs/cd/A91202_01/901_doc/appdev.901/a89852/utl_smt9.htm#1000815]
    Example:
    DECLARE
        mailhost    VARCHAR2(64) := 'mailhost.fictional-domain.com';
        sender      VARCHAR2(64) := '[email protected]';
        recipient1   VARCHAR2(64) := '[email protected]';
        recipient2   VARCHAR2(64) := '[email protected]';
        recipient3   VARCHAR2(64) := '[email protected]';
        mail_conn  utl_smtp.connection;
    BEGIN
        mail_conn := utl_smtp.open_connection(mailhost, 25);
        utl_smtp.helo(mail_conn, mailhost);
        utl_smtp.mail(mail_conn, sender);
        utl_smtp.rcpt(mail_conn, recipient1);
        utl_smtp.rcpt(mail_conn, recipient2);
        utl_smtp.rcpt(mail_conn, recipient3);
        utl_smtp.open_data(mail_conn);
        utl_smtp.write_data(mail_conn, 'This is a test message.');
        utl_smtp.close_data(mail_conn);
        utl_smtp.quit(mail_conn);
    END;
    /Max
    [My Italian Oracle blog|http://oracleitalia.wordpress.com]
    Edited by: Massimo Ruocchio on Dec 18, 2009 9:49 PM
    Added example

  • Question in regards to multiple addresses and phone numbers in one contact...

    Hello iPhone users!
    I have a quick question in regards to contacts. If I have a name of a restaurant that has two separate phone numbers and two separate locations, do I need to create a separate contact for each location and each phone number? For exmaple, let's say the Restaurant name is Luigi's and there is one location in Boston and one in New York. I wish to enter both of the addresses and both of phone numbers.
    Ideally, how would I combine both of these? I think to further qualify is if I'm able to combine both entries into one contact, how can I differentiate the phone numbers? I realize there are labels that I can customize (i.e. name one label Boston and the other New York) but it seems if I do that, then those custom labels appear to carry over for any other new contact I create which is not ideal.
    Am I on the right track or am I over thinking this? Does anyone have any suggestions?
    Many thanks!

    Thanks for your reply!  I'm just trying to figure out the best way. Basically I was hoping to create one contact entity with the restaurant name and withing that contact the following:
    1. Addresses for both locations
    2. Phone numbers for both locations
    3. A label to distinguish which number belongs to what location
    So at the moment, I have one contact and the label for one phone number is "main" which is not ideal because it doesn't distinguish what location the number is calling. Let's say I create a custom label called "Boston". It works fine and I can assign that label to that number. The drawback is that now the custom label "Boston" now appears globally in my custom label list. I guess this is fine with one or two labels but then I can see how this might get out of control with more labels being added. I was hoping a custom label would apply only to that one contact and not be globally available to all other new contacts.
    If I do create a custom label and delete it from my list, it then goes away for the contact that I assigned the label to.
    So given that information, I guess if I don't want the custom label list to get out of control, it's probably best to create a separate contact for each location... i.e.
    1. Luigi's - Boston
    2. Luigi's - New York
    I was just hoping to have everything consolidated into one contact as opposed to creating multiple ones. It seems like that can't be accomplished unless I have a huge list of custom labels in which I probably won't use them to apply to other contacts : )

  • "Invalid address" only when sending to multiple addresses

    I can send an email to <username>@gmail.com and to <username>@mac.com, but if I try to send an email to both recipients at once, my mail server says "Invalid address" even though my colleague can send an email to those addresses without a problem.
    Since my colleague can do it, it can't be the server; but I can't figure out the difference between my Mail configuration and his.
    Any ideas?

    I found my own answer. I didn't have password authentication on for the outgoing server. Weird. I was able to send mail to individuals without a password, but couldn't send to multiple people.
    It's working now.

  • I want to order multiple copies of an iPhoto book I have already purchased once. Is there a price break for multiple copies? Also, can I send to multiple addresses?

    I want to order multiple copies of an iBook I have already purchased. I have two questions:
    1) Can I send them to multiple addresses?
    2) Is there a price break for multiple copies?

    1) No.
    2) No.

  • Creating multiple libraries and using an external drive for data

    I'm a recent switcher and new to iphoto. On the windows platform, I used adobe album. I have a around 10k of images that I put on an external drive which is attached to my new imac. I deleted the iphoto folder and redirected it to my images on my external. All is working great. I'm looking for some advise on work flow of file/iphoto management. i.e. I'm assuming the more images I accumulate, the slower I photo is going to run? I hear you can create multiple iphoto libraries. Will that only load the photos that are associated with the library and I'm assuming optimize iphoto's performance versus always loading every photo you have taken every time you work in iphoto? If adding libraries is the way to go, can someone direct me to instruction on how to do this?
    This may be beyond this threads scope but I plan to put all my data (iphoto, imovies, itunes) onto an external drive in order to keep the imac main drive as clean a possible. Is my thinking correct in doing so. Any negative repercussion in doing so?

    Joe:
    I'm assuming the more images I accumulate, the slower I photo is going to run?
    You'll have to get quite a lot of photos into iPhoto before you start to see a real slowdown in performance. Users have reported libraries of 40K files and they perform just fine. However, do not keep all of rolls open as that will really do a job on the performance. Just open the rolls you need and close them all before quitting.
    Yes, you can use multiple libraries and only load what's in each. I use iPhoto Library Manager to manage and move quickly between 10 libraries. With the paid version of iPLM you can move albums and/or rolls between libraries as needed and keep the keywords, ratings, and comments intact.
    Using an external HD in order to maintain sufficient free space (10G minimum is what I recommend) on the boot drive to help optimize performance is a very good idea.
    As far as any negative aspects, it would be a good idea to have a second external HD as a backup to the working external HD. You can't be too careful with those image files (and other important files) that can't be replaced.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • LogicalDeletePollingStrategy adapter running multiple updates and using CPU

    We have multiple SOA processes that poll tables in a database with a Logical delete polling strategy. After polling the table the db adapter does an update to flag the record as read.
    We have a production database and test database for the source system, and production and test SOA 11.1.1.4 systems. After cloning our production database to our test database, I will see the update statement for the adapter running multiple times in the test database. However, their are no records in the table that meet the criteria for the polling.
    The polling frequency is every 10 minutes, and if the update statement did anything it would take less than 1 second. However I will see 5-10 copies of the update statement running and using resources.
    Has anyone seen a db apapter do this?

    maybe unit of order and unit of work can help you on that, though i haven't any experience on both topics :
    http://download.oracle.com/docs/cd/E12840_01/wls/docs103/jms/uow.html
    http://download.oracle.com/docs/cd/E12840_01/wls/docs103/jms/uoo.html
    or the mediator supports some sort of sequencer, see : http://www.xenta.nl/blog/2010/05/14/oracle-soa-suite-11g-resequence-messages-in-mediator/

  • Sending an XML message and using proxy at receiver end

    hi all,
    please suggest me the steps to be followed in order to send a XML message and accepting this message using proxies.
    please help me out with detailed procedure.
    thanks+regards,
    Ujwalkumar

    Hi UjwalKumar,
    Follow this link:
    /people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
    This blog gives an excellent description of 'FILE to Proxy' scenario.
    what you need is XML to proxy...i.e. your scenario is very similar to this one...only diffrence is  that  , you wont be using FCC .since your source msg is in XML format..
    Hope this helps..
    Regards ,
    Sushil

  • My Mac Book Pro address book has multiple addresses and when I try to "look for duplicates" it says there are none?

    My Mac Book Pro Address Book has multiple addresses for the same person from syncing before I cloud. When I try to "look for duplicates" it returns "no duplicates found" why does that happen? How can I correct it?

    For which version of Mail and OS?

Maybe you are looking for