SENDING TO MULTIPLE BURNERS

There are days when I need to burn many different DVD projects using iDVD from my computer.
1. Is there a way to have more than one active iDVD window open, like in iMovie?
2. Can you select external burners in iDVD?
3. Is it feasible to have multiple dvd projects burning from the same computer?
4. How would you go about solving my problem?
Thanks!

I've done two at the same time and, whether I burn one or two, I always use the .dmg method and burn at the slowest speed available (preferably 1x or 2x) - that takes a bit longer, but it cuts down on the possibility of errors, so it's worth it to me. I've not had a problem. Also remember to use quality media (I like Verbatim). And it really shouldn't effect the burn since you'd be using two different burners.

Similar Messages

Message error when sending to multiple recipients/contacts

Ever since 3.0 I can't send messages to multiple recipients. I'm on Optus in Australia using a 16gb 3G.
Anyone else having this problem?
Any fixes?

Actually, just for an update, if I turn off MMS I can send to multiple contacts. But with MMS on, I can't. Am I the only person having this issue?
I've tried a restore, and set-up as new phone. But still having no success.

Integrtion Scenario using BPM with two sender and multiple receiver

integrtion Scenario using BPM with two sender and multiple receiver
How many Application Components are required?

Hi Vinod,
1) In integration repository you can have one or many software components it depends on your landscape orchestration
2) In integration direcory you need at least one service for bpm and one or many for each system in your bpm
also each connection between systems and bpm must have receiver determination and so on.
Advice: Please treat BPM as a separate system.
best,
Wojciech

"Invalid address" only when sending to multiple addresses

I can send an email to <username>@gmail.com and to <username>@mac.com, but if I try to send an email to both recipients at once, my mail server says "Invalid address" even though my colleague can send an email to those addresses without a problem.
Since my colleague can do it, it can't be the server; but I can't figure out the difference between my Mail configuration and his.
Any ideas?

I found my own answer. I didn't have password authentication on for the outgoing server. Weird. I was able to send mail to individuals without a password, but couldn't send to multiple people.
It's working now.

My problem is that my iCal won't sync from my first-generation iPad to my computer, and the computer sends events multiple times back to the iPad... which is now full of duplicate events. I'm NOT on iCloud.

I'm just an old lady who doesn't know a lot about this stuff, but I do love my iPad and miss my portable calendar! My problem is that my iCal won't sync from my (first-generation, cheaper of the two models) iPad to my computer, and the computer sends events multiple times back to the iPad... which is now full of duplicate events. I'm NOT on iCloud. I've had this problem for nearly a year now. My Really Really Smart son couldn't fix it for me.

djb53 wrote:
Can take some time.... how much time?
There's no simple answer to that. My calendar goes back to 2004 and is moderately busy; it took around an hour. It's possible that you've hit a slow period on the server - it happens.
In order for it to work, your calendars should show on the MobileMe site, they should be listed under your MobileMe login name in the calendar list in iCal (calendars listed under 'On My Mac' will not sync) and your MM account details have to be entered in iCal Preferences>Accounts (this should have happened by itself).
If it's not working please see the page I linked to.

Why do my ical invitation acceptances send out multiple acknowledgements to the meeting intiator?

why do my ical invitation acceptances send out multiple acknowledgements to the meeting intiator?

Hi,
Welcome to the  Discussions
So we have DSL Modem <-> Base Station <-> Computer connected by Ethernet.
Is the Modem Routing ?
Is the Base Station set to "Share An IP" ?
(i.e are there two DHCP servers on your LAN ?)
Is Internet Sharing On in th G5s System Preferences > Sharing pane ?
In the Base Station is Port Mapping Protocol Enabled if it is doing routing ?
It is in the NAT tab of the Internet Pane.
Is the G5 also doing WiFi to the Base Station ?
Also check the Modem is not Blocking PINGS as this log shows no PING (But I am not sure it even got that far)
7:45 PM Thursday; February 18, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Native email sends message multiple times

Since I have updated to the new OS, the email app is now sending messages multiple times. When I initially send it, it appears to be unsuccessful, as it is in the Inbox with a red X. But the message is sent. The app keeps trying to send the "unsuccessful" message, and the recipient ends up receiving the same message more than once. Anyone else having this problem, or have an answer?

This issue has not yet been resolved in the below thread either.
http://supportforums.blackberry.com/t5/BlackBerry-PlayBook/E-mail-duplications/td-p/1675471
I would give rim a call to let them know of your problems.
If they can't track it they won't know how many users this is affecting. I imagine it will get solved a lot quicker if they know just how many users it's affecting.
Good luck

Sending to multiple people from smtp

Hi ,
How can i actually send to multiple ppl using utl_smtp ?
PROCEDURE send_test_message
IS
mailhost VARCHAR2(64) := 'mailhost.fictional-domain.com';
sender VARCHAR2(64) := '[email protected]';
recipient VARCHAR2(64) := '[email protected]';
mail_conn utl_smtp.connection;
BEGIN
mail_conn := utl_smtp.open_connection(mailhost, 25);
utl_smtp.helo(mail_conn, mailhost);
utl_smtp.mail(mail_conn, sender);
utl_smtp.rcpt(mail_conn, recipient);
-- If we had the message in a single string, we could collapse
-- open_data(), write_data(), and close_data() into a single call to data().
utl_smtp.open_data(mail_conn);
utl_smtp.write_data(mail_conn, 'This is a test message.' || chr(13));
utl_smtp.write_data(mail_conn, 'This is line 2.' || chr(13));
utl_smtp.close_data(mail_conn);
utl_smtp.quit(mail_conn);
EXCEPTION
WHEN OTHERS THEN
-- Insert error-handling code here
NULL;
END;
how shld i add into the recipient ??
i have tried
1 - '[email protected],[email protected]';
2 - '"[email protected]","[email protected]"';
both does not seem to work
kindly advise
tks & rdgs

You need to familiarise yourself with RFC821 - you'll find a copy at http://www.faqs.org/rfcs/rfc821.html
Do not confuse SMTP (an application protocol) with the way an e-mail looks. E.g. the TO and FROM fields in an e-mail can say anything and have no bearing on to whom the e-mail was send to, and from who it came.
Basically a "mail transaction" is a:
MAIL FROM - identifies the sender (can easily be spoofed)
RCPT TO - identifies a single recipient and can be repeated multiple times
DATA - submits the header and body of the e-mail
Read the RFC - it explains this in detail.

How can I send from multiple email aliases & names?

Hi, I wish to achieve the same result as the OP at http://forums.macrumors.com/showthread.php?t=112689 and by following the useful guides in that thread, am able to achieve what I want... sort of.
Basically, I have one POP account/mailbox, and only one.
However, I use 3 email aliases for different work purposes, e.g.:
Fred Blogs <[email protected]>
Dr F Blogs <[email protected]>
The Surgery <[email protected]>
Now, according to the advice, in Mail I can create one Mailbox, and under 'email address' in Mailbox Preferences, enter:
[email protected], [email protected], [email protected]
This works fine as far as it goes, and I get a drop down when creating new mail, however, all 3 'aliases' come from the same person's 'Name' - the 1 name I entered in the mailbox preferences in Mail.
No, what I need to achieve is to be able to send email from the 3 different names as well as email addresses, not just 3 different email addresses all with the same name.
This was a doddle under Outlook, you just create 3 accounts with the same SMTP server, but set 2 of them not to receive email (otherwise you'd end up with 3 lots of each incoming email from that 1 shared mailbox).
Mail however is not having any of it, and won't let me create duplicate accounts. I have even tried adding the full name in the email address field of settings, separated by commas: Fred Blogs <[email protected]>, Dr F Blogs <[email protected]>, The Surgery <[email protected]>. That didn't work either.
How can I achieve what used to be quite a simple process on my PC? I can't be the only person who uses one unified mailbox account, but sends from different aliases?
Thanks.

Thanks, but the issue occurs when I am trying to set up the 2nd account and get to the Incoming Mail Server Page.
Because I am using the same Incoming Mail Server and User Name as the 1st account, when I click Continue it reports:
/!\ The account "Account 1" already has this hostname and username.
It then won't let me continue. Now it sounds like you have the same setup, so do you have the same hostname and username in all your multiple accounts? :-S
The reason it does this is - I suspect - because even if you untick 'Include when automatically checking for new mail', when you manually check for new mail, you'd still get 3 lots of the same message. How do you get around this?

I record multiple tracks (3-5) from real instruments and vocals. I want to send these files to a collaborator to add more tracks to, but Garageband wants to mix these down (which I don't want). How can I send the multiple tracks files to my friend?

I record multiple tracks of real instruments and vocals wth Garage Band. I want to share the file with a collaborator so he can add another instrument or two. I have not found a way to do this without the process mixing down the tracks. I don't want them mixed down like when I send them to Itunes. Also I can't seem to just attach a file directly to an email for sending purposes. I thought I saw a method to do this with software instruments, but how do you do it with real instruments? I've tried every process on the "export" list to try to accomplish this, without success. Thanks for any breakthrough advice on this!

As isteveus said - for large projects uploading to a server would be best.
Also I can't seem to just attach a file directly to an email for sending purposes.
But for completeness's sake , you cou can mail a project, if you ctrl-click the project and use "Compress xxx.band". This will compress the project and create a zip file, that you can mail (if it is not too large). But ask your friend for the maximal file size allowed as a mail attachment.
But whichever method you use to share your project, be sure you include all loops and instruments, if your friend does not have the same JamPacks installed. You can bundle the loops into the project by saving it as an archive. "File > Save as" and check the "Archive Project" option.
If this option should be disabled, you can force it to become active by editing your project slightly. It is only available, if the project needs saving.
Regards
Léonie

Can i send to multiple email addresses for the same contact

I coach a baseball team and I want to create contacts under the kids' names with email addresses for both parents listed. Can I send email to multiple email addresses listed inside the same contact? I hope this makes sense.
Thanks!

You can do it individually, but it can also be done with Groups in Contacts, but you will need to create two or more groups. Once you have created the Groups in Contacts, drag the contacts that have multiple email addresses into each group. Then, select Edit Distribution List… from the Edit menu in Contacts.
For each group, select one address or the other for each contact. Do the same for the other group.
When you address an email, add both Groups to the address field in Mail.

How can I send to multiple address in one email?

In Outlook, I can send the email to multiple addresses by separating the emails with a semicolon. How can I do this using utl_mail?
Thanks!

Calling utl_smtp.rcpt multiple times.
[read more|http://download.oracle.com/docs/cd/A91202_01/901_doc/appdev.901/a89852/utl_smt9.htm#1000815]
Example:
DECLARE
    mailhost    VARCHAR2(64) := 'mailhost.fictional-domain.com';
    sender      VARCHAR2(64) := '[email protected]';
    recipient1   VARCHAR2(64) := '[email protected]';
    recipient2   VARCHAR2(64) := '[email protected]';
    recipient3   VARCHAR2(64) := '[email protected]';
    mail_conn utl_smtp.connection;
BEGIN
    mail_conn := utl_smtp.open_connection(mailhost, 25);
    utl_smtp.helo(mail_conn, mailhost);
    utl_smtp.mail(mail_conn, sender);
    utl_smtp.rcpt(mail_conn, recipient1);
    utl_smtp.rcpt(mail_conn, recipient2);
    utl_smtp.rcpt(mail_conn, recipient3);
    utl_smtp.open_data(mail_conn);
    utl_smtp.write_data(mail_conn, 'This is a test message.');
    utl_smtp.close_data(mail_conn);
    utl_smtp.quit(mail_conn);
END;
/Max
[My Italian Oracle blog|http://oracleitalia.wordpress.com]
Edited by: Massimo Ruocchio on Dec 18, 2009 9:49 PM
Added example

I want to order multiple copies of an iPhoto book I have already purchased once. Is there a price break for multiple copies? Also, can I send to multiple addresses?

I want to order multiple copies of an iBook I have already purchased. I have two questions:
1) Can I send them to multiple addresses?
2) Is there a price break for multiple copies?

1) No.
2) No.

Send to multiple recipients not in address book

FAQs about sending an email to multiple recipients seem to talk about using names already in one's address book to create a group. I have a text file that contains about 1000 addresses and want to send a one-time message to all of them (with each designed as BCC). How can I move those addresses all together -- or a big batch at a time in several messages -- without involving my address book?

My suggestion is take off your blinkers. DOC is not a text file. It is a Microsoft word document file. The only chance you have of that being understood by a mail program is if you buy Microsoft Outlook.
Otherwise, become familiar with CSV files (Comma Separated Values) http://en.wikipedia.org/wiki/Comma-separated_values. CSV permeates the entire data interchange process, especially address books, but including database data and spreadsheets. CSV files are text files. Real ones! I talk about them a little here. http://thunderbirdtweaks.blogspot.com.au/2013/03/importing-csv-files.html
If you have Excel installed and double click a CSV file Excel will open the file. I use LibreOffice, but that does not change the fundamentals of the CSV data format.
So I suggest you save your file in Word as "Plain text" and open in in Excel and hope Excel can make heads or tails of it.

Seebuger AS2 adapter for XI as sender for multiple messages

Hi all,
Has anyone managed to configure the Seeburger AS2 adapter for XI successfully to process multiple inbound message types.
We have an issue here with inbound messages being received by the AS2 adapter. We currently have it configured for inbound deliveries which is working fine. The issue is that we would now like to send other messages as well. It seems the AS2 adapter only looks at the sender/receiver party combination to determine the correct sender agreement, but does not look at the message type which is a limitation. I have heard mention of a splitter module which can be used to distinguish between different messages and pass them to the correct sender agreement for processing, information on this is thin on the ground to non existent. What is the name of the module? Is it specified in your sender AS2 adapter with parameters? Is it wrapped as an adapter? How do you configure the module to split and pass specific messages etc... Any help on this would be much appreciated.
Thx,
Pete

Hi Rudy,
the Classifier/BIC/Splitter - Solution is mainly designed for EDI-Messages that cannot be handled directly by XI.
IF you use pure XML-messages you should be able to handle it with XI-basic-functionality since this is what XI can handle itself.
Depending on how different your XML-Messages are, the effort will be very small or a little bit bigger.
In the ReceiverDetermination it should be possible for you to check whether certain XML-TAGs are existing or what the content for certain TAGs is BAsed on this information you can route the messages in a correct way.
(Of course you might have to create your own XSD for this containing the important TAGs of each message, so you can setup your Conditions)
Btw. the Seeburger BIC-Adapter can provide also this functionality, but this also needs to be customized)
Greetings
Stefan

SENDING TO MULTIPLE BURNERS

Similar Messages

Maybe you are looking for