Sending transcoded clip to Premiere Pro with Mono audio

Hi there,
I noted that others had asked this question around August 2013 but haven't seen any progress made on this issue, which is that we prefer to edit in Premiere pro with mono audio tracks, but we are unable to make transcoded material come over from Prelude with mono audio.
We need to have total control over our audio tracks and for us in a News/ENG environment that also means fast turnaround production. So we want to choose the part of the XDCAM clip that we want in Prelude, send it to Premiere Pro and put the interview grab (for example) down on track 1 of the Timeline with only talent mike audio (which was recorded on the camera's channel 1) and not have to pan it or worry about doing much else to it. Then we cut the rest of the overlay with sound effects that were recorded on channel 2 going straight to track 2 on the timeline. When we transmit it to head office we send them two discrete channels of audio: talent/VO on Track 1 and effects on Track 2.
We only have a problem when Transcoding is involved. With the audio prefs in PrPro set to "Mono" everything else is fine, its just that when Prelude transcodes a video it makes the audio a hassle for us, because it can only come over to PrPro as a stereo audio track.
Adobe, is there ever going to be the ability to just make a Preference in Prelude to send the clips with Mono audio, as there is in Premiere Pro??
Or has anyone figured this out and I am just missing something?

In Adobe Media Encoder, set up a new preset that has the video and audio settings you want to have your source footage transcoded to:
Then name and save that preset. The next time you launch Prelude, the preset will be an option for you to select to use for transcoding your material.
MtD

Similar Messages

How can I sync up my clip in Premiere Pro with the After Effects Comp I replace it with? How do I link them?

I am having some issues seeing a tracked mask work correctly in Premiere Pro. I clicked on my clip in my Premiere pro project and hit "replace with after effects comp". After correctly masking out everything in AE and tracking it to perfection, I clicked save and went back to my Premiere project. However when I view the new "linked" clip in my project it has dropped frames. The mask seems to track correctly but the dropped frames are an issue. Does anyone know how I could fix this?
Thanks,
Ajnies

When I return to the linked clip in my Premiere project, it does not contain every single frame of the original after it has been replaced by the AE comp. It skips about every other frame. I am doing a stop motion animation so this is highly noticeable.

How to record an audio clip in Premiere Pro cc with USB mic on PC

Hey All,
Having trouble finding a solution on the web. I have just made the switch to Premiere Pro CC from Final Cut Pro 7, and also from Mac to PC, yikes I know. I am looking to record some audio clips directly into PP with my USB mic. I have successfully hooked up my usb mic through the PC control panel. My ignorance will be apparent here, What should I do next in Premiere Pro to begin recording my clips?

https://helpx.adobe.com/premiere-pro/using/recording-audio.html
NEW! Voice Over record feature in Premiere Pro CC 2014 - YouTube

What do the zig zag lines mean on a clip in Premiere pro?

What do the zig zag lines mean on a clip in Premiere pro? And how do I fix it as I can't see a video image for that clip?

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
What are you editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
Review the NEW ITEMS process link in reply page #5 in The PPro/Encore tutorial list http://forums.adobe.com/message/2276578 to be sure your sequence and video match

Hi i am currently editing clips in premiere pro cc but everytime i go to change the speed not the duration of a clip it will not let me select it - also when i go to effect controls it will not let me select time mapping? please help

Hi i am currently editing clips in premiere pro cc but everytime i go to change the speed not the duration of a clip it will not let me select it - also when i go to effect controls it will not let me select time mapping? please help

savannahp
What version of Premiere Elements and on what computer operating system?
Please review the following that I excerpted from an older post here regarding Adobe's PRE_help comments about Hollywood Effect and mention of
Red Noir. Does any of the following apply to any of what is happening to you.
- Whenever I try to add an effect from the Hollywood Looks menu, it brings up a warning that all my previous effects on that clip will be deleted. However it will let me add those same effects *after* applying Hollywood Looks.
This is because of how the Hollywood Looks are designed to be used. Since these are effect presets (multiple effects in combination) that result in a specific "look"; they are best applied in isolation. If any previous effect is applied and we still allow a Hollywood effect to be applied, we will not be able to see what the effect does clearly. For e.g. if you already have a Gaussian Blur effect applied to your clip, and then we allow you to apply the "Red Noir" Hollywood effect, the fact that the "Reds" in the scenes will be highlighted and the others converted to B/W will not be clearly seen since the content is already blurred out. So any previously applied effects was designed to be removed. This holds good even if you apply a Hollywood look "on top of" another one. The previous one will be replaced. Having said that, you can customize the look further by either tweaking an already applied filter or by adding a newer effect on top. That is the reason you can apply an effect on top of the Hollywood Effects and not vice versa.
Please review and consider and then we can proceed from there if necessary.
ATR

How can i buy Adobe Premiere Pro With the student discount but in one payment?

i want to buy adobe premiere pro with a student discount but i dont want to have to make multiple payments, how can i do this?

CS6 Education https://forums.adobe.com/thread/1585740 is pay once, own forever... IF you can use 3 year old software
Otherwise, the current version is by subscription only... which means that when you stop paying, the software stops working
Adobe Education... Start here https://creative.adobe.com/join/edu
Education Plan https://creative.adobe.com/plans?plan=edu
One Year Intro Price http://forums.adobe.com/thread/1448933?tstart=0
http://www.adobe.com/products/creativecloud/students.edu.html
http://www.adobe.com/education/students/student-eligibility-guide.edu.html
ID Proof http://www.adobe.com/store/au_edu/academic_id.html

Premiere Pro Only Playing audio when i press play. And it says "Media Offline" with a big red screen. What do i do?

Premiere Pro Only Playing audio when i press play. And it says "Media Offline" with a big red screen. What do i do?

And When i double click the video files in the editing program, another window pops up named: Source:Sequence 01. But the window Program:Sequence 01 Has a Red screen on it! But the file clearly works so i have no idea what to do.

When I try to import video clips into Premier Pro 6 the audio and video aren't synced.

When I try to import video clips into Premier Pro 6 the audio and video aren't synced. I can moved both of them around without the other. This creates a lot more work. I have looked on forums etc but can't find the answer Can you please help.

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
-and Source Patching http://forums.adobe.com/thread/1442800?tstart=0
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
https://forums.adobe.com/thread/1070933 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
Does your video use a VARIABLE Frame Rate or a Constant Frame Rate?

My video's have codec but premiere pro see only audio file

Hi,
My Ematic EVH528 camera capture 1080p videos and I watch my pc with xvid codec. But premiere pro see only audio file.
I need a solution. Help me please.

Read Tweakers Page - Video Codecs and then convert to an editable format.

Premiere Pro CS5 skipping audio error

Anyone come across this:
When trying to edit an AIFF audio file in the Premiere Pro timeline, the audio skips when playing back,
meaning that after a few seconds it just skips several seconds and starts playing a different part further on in the same AIFF...
The indicator bar does not visually "skip": just moves on steady as it should.
Related to this:
I have a project that was converted from After Effects CS4 to CS5, that shows the following strange behaviour in CS5:
The comps contain layers that consist of AIFF audio files. When doing an audio preview (.) or a RAM preview, the audio does not play the part of the AIFF file that, according to the time-code, it should play. It starts where it should, but then suddenly it skips a few seconds to another part of the AIFF. All that while the red indicator bar suggests it is still playing lineair as it should (the red line does not "skip" to another point.
This leaves me with an unworkable situation, as it is quite unpredictable which part of the audio will play right...
As far as i can tell this behaviour only happens with a converted project (CS4 > CS5) in After Effects.
But when I started a new project in Premiere Pro I got the same skipping audio with a totally new project!
Converted back to CS4 for now.

Mark,
Your observations are probably spot on. I cannot only comment through PrPro 2.0, so changes could certainly have occurred. I do know that CS4 changed a lot, regarding Audio.
In my CS2 Production Studio version, I have had up to 22 Timelines/Sequences and most have had from 6 to 24 Audio Tracks, with a DD 5.1 SS Master Track. I have had zero issues with any Audio dropouts. Now, I have had issues with Playback stopping and at totally random spots, and this has happened with very simple to very complex Sequences, and different spots. Sometimes, this has happened with a fresh boot and Project load, but also after many hours of editing. These halts come and go. I've had them happen a dozen times in a row, only to then disappear in that editing session. I've had sessions that lasted for days, with not one, only to fire up the program, and get 3 halts in a row. That has been my only, even moderately similar experience.
Wish I could comment on later versions, but I cannot.
Thanks for your observations and for reporting,
Hunt

Adobe Premiere Pro Help | Editing audio in a Timeline panel

This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/editing-audio-timeline-panel.html

Or, go into the audio units format of the timeline and manually adjust the audio portion of the cut to hit as close to a zero crossing as possible. Jim's way is the easiest, and sufficient for most people, but if you need perfect cuts and not a quick fade, it is possible to do it in Premiere Pro.

No three point edit with merged clips in Premiere Pro CC 7.2?

Hello Premiere Folk,
I've recently, as of last night, updated to Premiere Pro CC 7.2. I'm currently cutting a feature using merged 5K red raw clips. We were expereicning some weird things but were able to work around them. The update fixed to major problems we were having;
1. Bloating projects going from 808kb to 5mb for no reason.
2. Not being able to perform a match frame on merged clips.
The update fixed these issues, but don't throw on your party hats just yet. Within this update a fuction CRUCIAL to any editor has been taken away after you've performed a merged clip function... THE EDIT! Any time I make an in and out point in my source with a merged clip and an in and out in my timeline and try to do an insert edit via a hotkey, it just edits the entire clip in the timeline starting with a radnom in point! I was able to set an in and out in my source and just edit into the timeline but even that function has been taken away. Adobe please fix this! Yes the match frame with a merged clip works but dont take away editing basics!

This bug is NOT FULLY FIXED. I'm on a tight deadline so i'm not looking very hard online to see if i'm alone - so please forgive me for just posting here...
I'm using CC7.2.1 it's 1/21... very grateful that match frame FINALLY works on merged clips, but, again, this insert/overwrite bug is only PARTIALLY FIXED.
Insert/overwrite with merged clips on 3-point edit now works, but ONLY when cutting in BOTH merged video+audio... if you're just trying to cut in the audio from a merged clip using a 3-point/4-point edit via hotkey, it's a no-go.
I, for example, needed to re-cut in audio under some video with effects on it. So, I unpatched the video source completely and patched source audio tracks 1-4 to the appropriate sequence tracks. Upon hitting insert or overwrite multiple times, nothing responds. The only way to cut anything in from the source (merged clip) was to patch the source video back into the timeline on an unused video track, then cut ALL the tracks from the source in, I then had to delete the video track re-link the now free audio to the original video. Not a big deal, but annoying enough & waste of precious time on tight deadline.
So, yeah, I have a workaround but is still not appropriate to have a core function not work properly. Especially when I'm working with a very complicated timeline.
That said, thanks for keeping on top of our gripes, Mark.

How do I join multiple (short) audio clips into one single long audio clip in Premiere Pro CS5?

Hello,
The question is in the title but I'm wondering how I can join multiple (short) audio clips into one single long audio clip in PP CS5.5. I put all my short clips right next to each other and selected all of them to see what options are available by right clicking and using the toolbar options at the top. The closest that I got was to nest the sequence, but that's not what I really want.
I'd like to merge all the short clips into one single (long) audio file to use under the video.
Thoughts are welcome and greatly appreciated.
Thanks,
-Melvin

O.K. This is kind of fundamental and you will need to learn up on this fully ...but for now...
Make sure you have the WAB ( work area bar )covering the length of the audio clips. ( You do not need to select them)
Go to the File Menu> Export Media
You will be given all the Export Options. Choose Wave File
Select option for Export Work Area.
Choose where to export the file to ( HD location)
follow your nose from there....
http://tv.adobe.com/watch/learn-premiere-pro-cs5/exporting-with-adobe-media-encoder/
BTW - Why are you taking the audio to Audition anyway? What are you going to do to it.

Why does Premiere Pro CS5 process audio source before exporting clip in AME CS5?

Hello everyone, my first post here. I am currently trying out the trial CS5 Master Collection on my MacBook Pro. I've been using Premiere Pro CS5 to put together family videos. I select a certain portion of a sequence and queue it for export in Media Encoder CS5 in the format H.264 for iPod with video and audio.
Now in AME I have a queue list of about 5 clips from the sequence. But when I hit the Start Queue button, the bottom left of the progress bar states "Adobe Premiere Pro processing audio source from [then file name]" for all 5 clips from the sequence then creates the first output file.
Then it moves to encode the second and again states "Adobe Premiere Pro processing audio source from [then file name]" for all 5 clips of mt sequence then spits out only the second output file.
This continues for the remaining 3 output files. The total sequence length is ~32 minutes with transitions and it takes about 35 minutes to export which is all consumed by the process audio source of the 5 clips in my sequence for 5 separate times.
Is there a certain reason why Media Encoder or Premiere Pro does this process of audio source? Is this process necessary or needed? I experimented with choosing different output formats but the results are the same. Any help would be appreciated, thanks.

Now that's pretty good follow-up to your first post, and quickly too! Nice detective work.
As you have found, there is basically a Render/Replace operation going on in PrPro, to get the material in the correct form for AME.
Thank you for reporting, as it saved me, and others, from basically saying what you said.
Good luck, and sorry that you beat us to the punch.
Hunt

How to send a project from Premiere Pro to be opened on another computer in FCP7?

The crux is I have this project in Premiere Pro CS5.5 which contains the original MOVs and time adjusted movs that I nested and turned into F4Vs, so it contains movs and f4vs with 1 aiff file and I need to send the work to the director(who has FCP7 and works on a Apple computer) so they can key out the green screen and grade it in FCP7. I prefer no to send 1 big file because there are lots of fast flickering cuts so would take alot of time to go through it pretty much frame for frame. So it would be eaier if they could view it as a project file in FCP7 like I can see it in Adobe Premiere Pro. I haven't done this before as you can tell but someone must of tried doing this before so how is it done?
My project settings in Pro are
Editing mode: DSLR
Timebase 25.00 frames/second
FRame size 1920 x 1080 vertical 16:9
Pixel Aspect Ratio: Square Pixels (1.0)
Display Format: 25fps Timecode
Sample Rate:48000HZ
Dispaly Format:Audio Samples
Video Previews
Preview File Format I-Frmae Only Mpeg
Codec: Mpeg I-Frame
Width 1920
Height 1080
Please help I really appreciate any advice, I've tried converting the f4vs into apple pro res but no video converter or media encoder will let me even if i imort the pro res preset.

Duplicate the project with referenced events onto the external hard drive.

Sending transcoded clip to Premiere Pro with Mono audio

Similar Messages

Maybe you are looking for