Sendmail configuration file changed
Recently sendmail stopped working in one of the solaris servers. I found that the configuration file has been changed. I guess it has changed to the default one. We dont have any idea hw this happened because we didnt change the configuration file.
Any idea guys how this changed?
Reverting back to the default one would suggest that someone has patched the system. Check the date and time stamp and go from there.
alan
Similar Messages
-
How can we send only one message to a WCF service at a time? How we can limit the number of concurrent calls to a WCF service without use the Singleton pattern or without do the change in BizTalk Configuration file? Can we do it by Host throttling?
Hi Pawan,
You need to use WCF-Custom adapter and add the ServiceThrottlingBehavior service behavior to a WCF-Custom Locations.
ServiceThrottlingBehavior.MaxConcurrentCalls - Gets or sets a value that specifies the maximum number of messages actively processing across a ServiceHost. The MaxConcurrentCalls property specifies the maximum number of messages actively
processing across a ServiceHost object. Each channel can have one pending message that does not count against the value of MaxConcurrentCalls until WCF begins to process it.
Follow MSDN-
http://msdn.microsoft.com/en-us/library/ee377035%28BTS.10%29.aspx
http://msdn.microsoft.com/en-us/library/system.servicemodel.description.servicethrottlingbehavior.maxconcurrentcalls.aspx
I hope this helps.
Rachit
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
How to change destination table dynamically in configuration file in ssis?
hello,
i have a package i am having one data flow task.in data flow task i have one source and one destination.source and destination are different.i have created xml configuration file by configuring source and destination connection
strings.
now i want to change destination in the same server to different database with out opening the package.i want to directly change in the config file.we can change it by modifying configured value proerty and intial catalogue value.but if the table is not
existed in the changed database.how we can create it dynamically.HI jiri Neoral,
thanks for reply,as you said above process by this we can do change only databasename.if in my destination database,the table which i used in package is not existed,can we create it dynamically
using config file.later changing table name is possible?
For that you need to have a step in SSIS package prior to data flow task to check if table exists and if not create it
You can use execute sql task with query like below
IF OBJECT_ID('TableName') IS NULL
CREATE TABLE TableName
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Change in the Configuration file
I need to change the configuration file in the run time and reflect the changes using JMX. Can anybody suggest me the way to proceed and also provide me links related to that?
Hi Pawan,
You need to use WCF-Custom adapter and add the ServiceThrottlingBehavior service behavior to a WCF-Custom Locations.
ServiceThrottlingBehavior.MaxConcurrentCalls - Gets or sets a value that specifies the maximum number of messages actively processing across a ServiceHost. The MaxConcurrentCalls property specifies the maximum number of messages actively
processing across a ServiceHost object. Each channel can have one pending message that does not count against the value of MaxConcurrentCalls until WCF begins to process it.
Follow MSDN-
http://msdn.microsoft.com/en-us/library/ee377035%28BTS.10%29.aspx
http://msdn.microsoft.com/en-us/library/system.servicemodel.description.servicethrottlingbehavior.maxconcurrentcalls.aspx
I hope this helps.
Rachit
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
Change user configuration file location
Hi All
I was wondering if it's possible to change the location of
the User Configuration Files that live in:
C:\Documents and Settings\*USER*\Application
Data\Adobe\Dreamweaver 9\Configuration
The problem I have is that my work computer network policy
limits my Windows Profile to 50Mb (crazy I know) and I would like
to move the Dreamweaver (and Flash) config files out of my profile
to a different location. This would allow me to install extensions
etc without increasing my profile above the 50Mb limit.
Any info would be much appreciated.
Thanks
Barry.I hae not seen a way to do this, unforunately. You can
suggest it to the
dev team -
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"nitefoll" <[email protected]> wrote in
message
news:fjjnud$88q$[email protected]..
> Hi All
>
> I was wondering if it's possible to change the location
of the User
> Configuration Files that live in:
>
> C:\Documents and Settings\*USER*\Application
Data\Adobe\Dreamweaver
> 9\Configuration
>
> The problem I have is that my work computer network
policy limits my
> Windows
> Profile to 50Mb (crazy I know) and I would like to move
the Dreamweaver
> (and
> Flash) config files out of my profile to a different
location. This would
> allow me to install extensions etc without increasing my
profile above the
> 50Mb
> limit.
>
> Any info would be much appreciated.
>
> Thanks
> Barry.
> -
Configuration Files for AEX: How to change between multiple configurations?
I have both an Airport Extreme and and Airport Express at home. The Extreme is used for my wireless network at my house and the Airport Express is used for streaming Airtunes. I want to use my Airport Exress as a base station when traveling (to my parents' house, hotels, etc.) and for streaming when I get home. I don't want to have to reconfigure the AEX each time I change uses for it. I have configuration files saved for both uses, but don't know how to change between them. The older version of Airport Utility allowed you to change between configurations, but I can't figure out how to do this with Airport Utility 5.4.2. In the older version, I could select the Airport station in AP Utility, click under configurations, choose my preferred file, and restart. Unplug the AEX and when I plugged it back in, it would load the preferred configuration. How do I do this with the newest AP Utility?
Oops, you're right, that article is a bit dated.
Try this ...
To create a new profile:
o Open AirPort Utility, select your AX from the list, and then, click "Manual Setup."
o From the AirPort Utility menu, select "Base Station," and then "Manage Profiles."
o Click "+" to create a new profile; give it a name, and then, click OK.
o Set options, such as network name, passwords, Internet connection method, etc.
o When done setting the options, click Update.
To switch profiles:
o Open the AirPort Utility, select your AX from the list, and then, click "Manual Setup."
o From the AirPort Utility menu, select "Base Station," and then "Manage Profiles."
o Click on the desired profile, and then, click OK to apply the new profile and restart the AX.
Just remember to switch to the desired configuration profile before removing power from the AX. -
Can I change the content of a section in config data file use Configuration File VIs of LV?
There are few sections in my .ini file, I need to change the content of a section in this .ini file. Are Configuration File VIs in File I/O fuction pallete able to do that?
Thanks.You should be able to. Open the .ini file, read the key (if it exitst) delete it and write a new key (you might be able to directly overwrite the key but I havent tried this). Close the file with the write file? set to true and you should have modified the .ini file with the config vis.
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA -
Watch configuration files for changes
I changed web.xml to get charting to work and it did (but it worked without restarting CF)
I do not have the Watch configuration files for changes option checked in cfAdmin.
I went to make the same changes on other boxs and CF "undeployed" itself.
I am running CF8 on Solaris. I recently upgraded the JVM to 1.6_10See
http://www.stillnetstudios.com/2008/03/04/getting-cfstat-to-work. -
Sendmail Configuration in Solaris 10
I have a script that I've been using in Solaris 9 to disable incoming mail. The script basically
- edits the "/etc/rc2.d/S88sendmail" file
- replaces MODE = "-bd" with MODE = " "
- sends command "/etc/init.d/sendmail stop" to stop sendmail
- sends command "/etc/init.d/sendmail start" to restart sendmail
Can anyone tell me how to do this in Solaris 10 since "/etc/rc2.d/S88sendmail" file no longer exists. I'm assuming it has something to do with SMF. I've found documentation on how to start and stop services (ie: sendmail) with SMF but can't seem to find how to make configuration changes.
Any help is greatly appreciated.The sendmail control file is in /lib/svc/method/smtp-sendmail (you may have to export them first using the svccfg tool)
Edit it and change the line MODE="-bd" to MODE=""
Edit the /etc/mail/submit.cf file.
Change the line D{MTAHost}[127.0.0.1] to D{MTAHost}[mail.yourdomain.com]
Restart Sendmail with: svcadm disable smtp; svcadm enable smtp -
Configure NTP and sendmail configuration on T5240
Hi Sun gurus
Can some one let me know how can i configure the NTP & SENDMAIL configuration on T5240 sun sparc.Your anaswer will be highly appreciated.
Regards
etc.NTP is the easy part- do you want your machine to be an NTP server (that can serve out time updates to other local machines) or an NTP client (able to receieve time updates from a nearby NTP server).
Either way, it's fairly straightforward. For an NTP server- first you'll need a lower stratum external NTP server to use as a reference (unless you have a GPS clock on-site- in which case you can be your own strarum 1 server). You can look at the lists of available public NTP servers on [ntp.org|http://psp2.ntp.org/bin/view/Servers/WebHome] - check their usage guidelines- some server owners prefer it if you email them for permission before you list them as a peer to keep their traffic in check (or just use the ntp pool cloud).
Once you select a server (or a few servers) to use for reference you simply need to adjust your ntp.conf file:
cp /etc/inet/ntp.server /etc/inet/ntp.conf
vi /etc/inet/ntp.conf
change the line
server 127.127.XType.0
to
server (IP address of the external ntp server)
or
server 0.pool.ntp.org
if you're going to use the public ntp pool
if you want to list more than one server as a peer, you can make additional "server" lines- such as
server 1.pool.ntp.org
server 2.pool.ntp.org
etc...
comment out the "fudge 127.127.XType.0 stratum 0" line
save and exit.
touch /var/ntp/ntp.drift
(need to create an empty file for ntp to use to log clock drift stats)
and enable the ntp service
svcadm enable svc:/network/ntp
If you want your machine to be just an ntp client... do this instead...
cp /etc/inet/ntp.client /etc/inet/ntp.conf
svcadm enable svc:/network/ntp
Sorry but I can't answer the sendmail question. Starting the service itself is easy, configuring it is another story (and the topic of an entire O'Rielly book). -
Imac is no longer able to open the Configuration file
Hi ,
I have an imac ( ilamp) 20' connected to ADSL, via Netopia Router which is connected to the Airport extreme connected to imac, for the PB Aluminum Tiger 10.4.5. we both can connect. PB can print via imac/printer.
The imac is no longer able to open the Configuration file, when i enter the pswd which is correct, i get the message "The Airport Admin. Utility was unable to read the configuration of the selected base station an error occurred while reading the configuration "
My Beau updated Airport to V5.7, this is the first time since the update I've tried to access the conf. file for the imac which i have done numerous times prior.
I have a new base station Ip address 254.128.0 in Airport Utility Admin, on the imac which does not reflect my network settings anywhere, and is not what it use to be, i think, it was one value different than the PB.Base station IP. I do not know how it changed neither one of us changed it.
I tried using the Airport Setup assistant (imac), I received this message:
"Appropriate Airport hardware was bot found on this computer,if you recently
Installed, an Airport card,please shut down your computer$ make sure the card is properly istalled."
The imac does not have a card, nor do i think it needs one.
I would like to be able to at least open the configuration file.
Thank you for reading my post.
Eme
Power PC G4 (3.3) iMac♥ Flat Panel 10.3.9 & 15 Alum.PowerBook Tiger Mac OS X (10.4.4)Hi Kes, a star for the company !
I made an error on my first post I have a Netopia modem, Airport router.
And so it remains, i guess that there must be an easy answer somewhere
that I am missing that I/we should read, some direction to that would be helpful, and I would be very appreciative.
As I said the password had been set, and it is not an issue of that being forgotten, i wondered if it was changed back to "public" tried, not it.
particular because everytime the imac wakes one of the folders on ( no one else in office just me and boyfriend and it is his work folder he has a copy on the PB.( the folder on desk top has been clicked on, the one with sensitve info, i have backed the folder up and secure trashed it, just in case some security issue hacking has taken place, thats closing the barn door after the fact.
Good luck,w/ this Q.
regards Eme
Power PC G4 (3.3) iMac ♥ Flat Panel 10.3.9 & 15 Alum.PowerBook Tiger Mac OS X (10.4.5) -
No dsn is present in the configuration file in the reporting services 2008
HI i have found this error in the log file of my reporting services ,
when i comes to the Configuration file in that
my DSN path is empty no input code is there in that DSN tags
<DSN>
<DSN/>
it shows the empty tags,
and my Current Report Server Report Credentials are Windows,Service account credentails
will it take the problem or what
We have repair the BIDS setup also still not able to solve my issue.
once this is resolved now able to send the emails using subscriptions.
pls infom abut this , i have sufferd this problem last 20 days.
Please update the above query with high priority
TanQHi Ychinnari,
According to your description, you found error in log file of reporting services, when you come to rsreportserver.config file, the DSN tag is empty.
DSN specify the database server that hosts the report server database connection string. The report server database is created, this value will be encrypted and added to the configuration file. To solve the problem, we need to connect to either an
existing report server database or create a new one for this instance. For detail information, please refer to the following steps:
Start the Reporting Services Configuration Manager and connect to the report server instance for which you are creating the database.
On the Database page, click Change Database.
We can create a new report server database or select an existing database, then click Next.
Connect to the instance of the Database Engine that you will use to create and host the report server database.
Specify properties used to create the database.
Specify the credentials used by the report server to connect to the report server database.
Review the information on the Summary page to verify the settings are correct, and then click Next.
Verify the connection by clicking a URL on the Report Server URL page or Report Manager URL page.
For detail information about Configure a Report Server Database Connection, please refer to the following document:
https://msdn.microsoft.com/en-us/library/ms159133.aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support -
Reading Encrypted Password from Configuration File and Decrypt it at login
Hi All,
My application reads a configuration file to connect to the ORACLE database. The values defined for password are clear text as given below:
user: 'mh'
password='abcd1234'
Is there is any way I can give an encrypted password in the configuration file instead of a clear text file and at the time of login ORACLE decrypts it. I am using ORACLE 11g Database.
My company have a requirement that passwords are not stored in the clear in properties files. the reason being I suppose that if the password is stored in plaintext someone could hit the property file directly, get the password and then connect to the database with it.
For a regular user connecting through an Oracle client or SQL Developer they would need to have the plaintext password in order to connect.
its based on the requirements of
International Standards Organization Guidance
ISO 17799 � 9.5.4 requires password management systems to:
� enforce the use of individual passwords
� allow users to select and change their own passwords if appropriate
� enforce a choice of quality passwords
� force regular changes of passwords
� maintain a record of previous user passwords to prevent re-use
� not display passwords when they are being entered
� store password files separately from application system data
� store passwords in encrypted form using a one way encryption algorithm
� alter default vendor passwords following installation of software
So if I can store the password encrypted using a one way algorithm then hacker/user couldn't decrypt it and then access the database.
I have feeling there is a way of configuring this in Oracle advanced Security, but just can't quite get it to work.
Edited by: user5568473 on 20-May-2013 00:05So if I can store the password encrypted using a one way algorithm then hacker/user couldn't decrypt it and then access the database.... and neither can your application. Encryption is needed in this case. The decryption must be written into your application. I've written my own in some cases, but finding a library for your development language is a smarter solution.
One alternative is using an Oracle wallet. It doesn't fit every circumstance and does have some maintenance headaches.
You can set up a basic secure password store to encrypt and store the password for a given user@instance combination, and then connect to the database without passing a password. SQL*Net adds in the appropriate password from the wallet for when you connect.
http://www.oracle.com/technetwork/database/security/twp-db-security-secure-ext-pwd-stor-133399.pdf
Advanced Security Option also allows you to set up a Public Key Infrastructure connections (SSL encryption and/or authentication). It also uses a wallet to store the SSL certificates and credentials. I don't have personal experience on this approach.
SSL and the wallet allow you to connect to the database similar to CONNECT/@net_service_name or sqlplus /@net_service_namehttp://docs.oracle.com/cd/B28359_01/network.111/b28530/asossl.htm#CIHCBIEG -
All,
I'm experiencing an issue where when using the Office 2013 package pulled down from ODT, that if I try to change the locations of either InfoPath Filler 2013 or Publisher 2013 from the default of Microsoft Office 2013 then I receive the message "The
configuration file did not contain well formed AppV configuration XML. Please check the management server event log for more information". If I check Applications and Services\Microsoft\AppV\Server-Management\Admin the error displayed there is "An
error was encountered parsing dynamic configuration file '0'. However I am able to change the shortcut location for all other applications except the above 2. I've tried redownloading the files using the ODT and also changing the version number (so far I've
tried both the 15.0.4631.1002 and 15.0.4659.1001 with the same result).
As all I'm interested in so far is having a package which contains Visio and Project I've tried following the article to exclude all the other Office elements:
http://technet.microsoft.com/library/jj219426(v=office.15).aspx#BKMK_ExcludeAppElement. However the package looks to be the same and when I load it into the management console all the options and elements to Office 2013 are available like they were before
when I hadn't set the exclude tags so I'm not sure whether the ExcludeApp parameters actually work correctly.
This then brings me onto the 3rd issue I've experienced. I have a group for the Visio users and I've set custom security for them to have Visio delivered to them but not Project and then a seperate group for just Project users who will have Project delivered
to them but not have Visio. When testing this sometimes seems to work but other times it seems to trip out and a user just in the Project or Visio group will get all of the Office 2013 applications and under the default location of Microsoft Office 2013. When
trying to spot correlation with this it appears random and can happen to any user on any device. We have sequenced a few applications ourselves where different parts are needed for different users and we have successfully managed this using different security
groups for different applications, just as I'm trying here with Office 2013.
Has anyone else experienced the issue with the "did not contain well formed XML" as at the start of the post and how were you able to resolve this? Also has anyone any advice on how to troubleshoot the issue with the security seeming to trip out
and publish all applications within a package to a user regardless of whether they are in the correct group or not?
The management / publishing servers are 5.0.1224.0 which is SP1 HF4 and the clients are on SP2 HF5.
ThanksNicke,
The config files are UTF-8. I did find the same article as yourself, however when searching for the value ‘TakeoverExtensionPointsFrom46=’ within either of the configuration.xml files that text isn’t found.
No sinister reason not to share the file used, just it’s the same structure as referenced in the article:
http://technet.microsoft.com/en-us/library/dn745895(v=office.15).aspx. The only difference being that I’m using ProPlusVolume and I’ve set a version number (which is the October
2014 update). I’ve even looked to follow the above example as closely as possible in just using the ExcludeApp ID of Access and InfoPath, just to try and prove the process. However I still get the usual full package. The version of the Click-to-Run setup.exe
I’m using is 15.0.4623.1001, so later than the version specified at the end of that article which is 15.0.4619.1000. Where can I expect to see the elements excluded? Will it be when loading the package into the management console or would it just not appear
on the machine when delivered?
<Configuration>
<Add SourcePath="C:\OfficeDeploymentToolV2" Version="15.0.4659.1001" OfficeClientEdition="32">
<Product ID="ProPlusVolume">
<Language ID="en-us" />
<ExcludeApp ID="Access" />
<ExcludeApp ID="InfoPath" />
</Product>
</Add>
</Configuration>
3). We’ve not used global publishing in our environment yet so I will try that. I’ve set both GlobalRefreshEnabled and GlobalRefreshOnLogon to True and when using the command Get-AppvPublishingServer on the client I’m testing with I can see this is pulled
through correctly. I’ve also added the client name to the AD group used to grant access to the package and it is published. However nothing is pulling through onto the Client, so are there any steps I’ve missed or misinterpreted when looking to set this up?
I guess the global publishing is there to keep in with licensing for Office being per device? On a slight aside, as Windows licensing is being changed to allow per user licensing
http://www.zdnet.com/microsoft-to-make-per-user-windows-licensing-available-to-enterprise-customers-7000035401/ does anyone know if there are any plans to allow for Office / Project / Visio licenses to go per user as well? We’re a volume license customer
rather than subscription based so I think a lot of the options to selectively deploy Visio and Project are excluded for us.
Dan,
Ok that explains why the security could be tripping out then and leading to this result. As above I’ll try with global publishing and see how I get on.
From what I’ve read / watched I think only one Office 2013 package can be published to a machine, so we would be unable to have a separate package for Visio and a separate package for Project and then attempt to deliver
them both together. If a user wanted both Project and Visio then I guess we’d need to have a combined Project and Visio package to cover than scenario, but then 2 more separate Project and Visio packages for those who would only want either Project and Visio
(I think).
The scenario we’re looking at is to see whether we are able to deliver Project and / or Visio to different users through an AppV package and this will then cover users on XenApp or on fat clients. Only a small proportion of our
users will need access to Project and / or Visio so therefore we’d only have a small amount of Project and Visio licenses.
However from what I’ve tested up to this point and from what I’ve picked up from Forum posts / watched on TechEd sessions is that as publishing is Global and is unable to use different security groups for different elements of the
suite, then using Office through AppV is only suitable if you will be delivering the whole suite (including Project and Visio) to all of your users. So in a scenario where you’d only want certain elements to be delivered to a handful of users then you’d need
to keep with traditional ESD methods to have this installed onto fat clients and steer clear of XenApp. If wanting to install to XenApp then a lockdown tool like AppSense or AppLocker would also need to be brought into the equation.
Is my understanding above correct or have I missed some options / methods?
If the full Office package is always delivered but a company only has Office licenses and no Project and Visio licenses for all its users, how do they stop Project and Visio being delivered and being available? Or again if you have
this use case is the AppV method one which will be unsuitable?
Thanks -
I have two cFP-2120 RT controller. They both have NI-Serial RT2.5.6, DataSocket for LV RT4.2, NI-VISA 3.6, FP Drivers 5.1.0, FP VI Manager 3.1.0 LV RT 7.1.1 installed. But one same vi can run on one controller but not another.
the error message got when it runs on another controller is "Error -32810 occurred at The FieldPoint server initialization failed. Possible causes: 1. Missing or corrupt configuration file; 2. Failed to create callbacks. : FP Open.vi"
I wonder by what it is caused?
ThanksHi Matthew,
As mentioned previously, this KnowledgeBase article may be of some help. Also, if your code is being run on an embedded controller and then a network controller (not embedded), you will need to run the program differently. On the embedded controller, you should deploy your VI in a Project Explorer or programmatically (as described here.) However, you do not need to deploy the program to a network controller, but simply run the VI.
I would also suggest creating a new .IAK file. Do you still see the same error? Also, double-check that the software installed on the controller matches the software installed on the host PC. If you have any file paths associated with one FieldPoint controller, ensure that you are changing them to match the second controller.
Please keep us posted on your troubleshooting steps. Have a great day!
Amanda Howard
Americas Services and Support Recruiting Manager
National Instruments
Maybe you are looking for
-
Mac Mini Server Doesn't Support Duel Thunderbolt Displays!
I purchased a mac mini server with the intent of ultimately running two thunderbolt displays off of it. I pre-ordered in August, waited six weeks for it to arrive and realized that the mac mini server that I had been sent was a lemon. I applied for a
-
Every since I updated my phone (10.1.0.4181), my SMS and MMS have been failing. My SMS will often freeze on one conversaton for up to half an hour and won't let me type or move to a different conversation, though I can go back to the hub or access my
-
Facetime option isn't available in Settings Phone?
I just bought a new iPhone 2 days ago, it was on Framware 4.02.. Face time was working smoothly and so great! Suddenly i got update notification from itunes and i updated my iPhone to 4.1, Tried to make facetime calls but couldn't find the option whe
-
Structuring a JSP/J2EE (Tomcat) application
If anyone can give some direction on this, then I'd be very happy. I am trying to rewrite an application I previously developed in PHP using JSP/J2EE in a Tomcat enviroment. I am rather unsure about how the application and related files should be org
-
Computer Crashed... Is there a way to get back purchased music?
Hi, does anyone know if it is possible to get music that was purchased thought the itunes store back without having to pay for it again. My hard drive got destroyed. Thank you for your time and thoughts!