SendMail doesn't work outside network

I need to enable a mail server in Solaris 11. I'm setup sendmail, procmail, imap and pop3. The system's status:
online
dic_01   svc:/network/sendmail-client:default
online
20:16:19 svc:/network/smtp:sendmail
online
13:24:06 svc:/network/imap/tcp:default
online
13:24:06 svc:/network/pop2/tcp:default
online
13:24:07 svc:/network/pop3/tcp:default
I can to send mails within network, the mail is sent and received but I can't to send and to receive mails outside network.
Thank you in advance for your help.
Jose.

Sounds like local_only might be set to true instead of false. True is the default.
This should help you.
http://fixunix.com/solaris/142775-netservices-limited.html
alan

Similar Messages

Mac connects to wifi, but internet doesn't work. Network diagnostics shows problem starts at ISP. All software is updated and all other devices are able to effectively use the wifi source.

Mac connects to wifi, but internet doesn't work. Network diagnostics shows problem starts at ISP. All software is updated and all other devices are able to effectively use the wifi source.

Hi, KK93.
Sometimes a simple power cycle of the router and Mac can resolve the issue. However, try the steps in the article below to troubleshoot the Wi-Fi issue with your MacBook.
Troubleshooting Wi-Fi issues in OS X
http://support.apple.com/kb/HT4628
Also, see the article below to make sure the router setting have been optimized for performance.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Cheers,
Jason

Finder sidebar doesn't work for networking?

Does anybody else find that the sidebar in finder doesn't work when you network your computer to a pc network? I SEE the file servers when I click on "all" but when I double click on one of them it always says "connection failed". The only way I can access the network is to go to "Go" then "connect to server" then type in smb://ipaddress and have the server directly mounted to desktop (after changing finder preferences to show mounted volumes on desktop). Does the finder sidebar just not work then in leopard or am I doing something wrong?

When you click on it, it will try and log on as user guest with no password. This will nearly always fail on a windows box.
top right of the window pain there should then appear an option to 'connect as', click this and type in a valid username and password. Tick the box to add it to your keychain and it should then always connect when you click on the sidebar.

FileLock Doesn't Work Across Network

I have found a case in which FileLock doesn't work. I'm trying to use FileLock to prevent two instances of the same process to run simultaneously on different machines (or the same machine) on the network. I actually saw two processes, one on each of two Linux machines obtain a lock on the same file at the same time.
Can I be sure that FileLock is calling fcntl and not flock (which wouldn't work over the network)?
Is there any way to fix this or get around it??
Here is the relevant code:
try{
     File lockFile = new File(getLockFilename());
     lockFile.createNewFile(); // Throw out the boolean return value; it doesn't matter if this succeeded.
     FileChannel fc = new FileOutputStream(lockFile).getChannel();
     fileLock = fc.lock();
catch (FileLockInterruptionException flie){
     // Allow this one.
catch (IOException ioe){
        // Report the exception, release the lock if obtained and exit.
// Code executed while the file is locked includes setting up and registering an RMI server object.
try{
     fileLock.release();
catch (IOException ioe){
     logger.warn("Unable to relase file lock: " + ioe.getClass().getName() + ": " + ioe.getMessage());
}

I suppose when you say "across network", you mean via
nfs?Yes.
Have each machine check some central point (or all
other nodes) for the existence of a server. Of course
there could be some synchronization problems, so you
might check several times. Even if the remote
interface is successfully exported, have it check one
final time to ensure. To be paranoid, you could have
it check often.We have a strong requirement not to have a central server, which has made coding this a headache. It would be pretty unacceptable to query every machine on our network (most of which probably aren't running any related process at any one time and are probably running other jobs) any time someone wants to start one of these processes on any machine. (There could be hundreds of these processes running at once with different parameters; it's just that no two with the same parameters are allowed to run at once. Each of these will act as a separate RMI server so other processes can communicate with the running process for other purposes besides just determining whether it is running.) A registry can only contain objects on one machine, right? Or can I somehow bind everything on the same host even though that's not where the objects are?? I am already writing the name of the successful host for one parameter set to a file and barring other processes with the same parameters from executing if looking up the process on that host succeeds. This works in most cases, but there is a race condition if two processes start around the same time and both read the file before either has written its host name there. That's why I'm trying to use a file lock on a different file so the read-bind-write sequence happens while the file is locked.

HP Laserjet p1505n doesn't work over network with Yosemite

Ever since upgrading the machines in my house (Mac Pro, iMac, MBPretina, MBAir) to Yosemite, I have not been able to use the network attached Laserjet p1505n that used to work flawlessly under 10.9. It doesn't appear in the printer tab in System Prefs where it used to pop up. Anyone have any experience with this? The printer will install via USB just fine on the Mac Pro, MBPRetina, etc. Thanks!

To see the printer in the Default view of the Add printer window, a protocol called Bonjour is used by the printer and Mac. This protocol is having issues for some users who have upgraded to Yosemite. Until the issue is resolved you may be able to use one of the IP protocols to connect to the networked printer. To do so you will need to find the IP address being used by the printer. If the LJ-P1505n has a control panel, you may be able to generate a report showing the network settings.
Once you have the IP address you can open Printers & Scanners and click the plus button to add a printer. Then click on the IP icon and enter the IP address of the HP in the Address Field. In the Protocol field, change to HP Jetdirect-Socket and in the Queue field, leave this blank. You can then change the Name from the IP address to LJP1505n and in the Use menu, select the P1505n printer. Click the Add to complete the printer creation and then see if you can print.

Check In/Out doesn't work on network drive?

My company has used DW's check in/check out functionalities just fine for years, but before now the local copies of a site's files had been stored on each user's Mac's harddrive. I've been working on relocating those local copies to a single network drive that everyone can access so we're all working from the same local copies; most everything's going great except it looks like the check in/out functions are no longer working. It looks like the only indication I can see now in the FTP view is a green check on the remote files pane when something's checked out– the local copies don't show lock or check icons any longer.
Given that the only change has been moving the local files over to the network drive, I have to assume DW's check in/out (or at least however I have settings set now) doesn't play nice when the local files live on a network drive. Has anyone run into this issue, and is there a fix for it?
Thanks,
J

@Zabeth69:
Yep, a new site definition's been set up and I've double-checked that the "local files" setting is pointing to the shared network server as the new local folder.
@Nadia-P:
At first I didn't think that link had anything that I didn't already know, and then saw these two bullets:
• The local root folder for this defined site must be on the local hard drive of a workstation.
• Your local root folder should not be shared or on a mounted drive.
So in short, I suppose those answer my question, but they don't actually say *why* that is– it's hard to believe that the checking feature is limited to a literal local drive, and not a network drive. Seems odd. I'm going to poke around some more and try and figure out why that is, but I'd be grateful if anyone happens to know why in the meantime...
J

URL request doesn't work outside of Flash Pro [CS6]

I've been working on a XML project in class using Hellcat, and everything seemed to be working properly, untill I used the html test in google chrome. None of the links would work, nor would it show an error. I thought "hey this is beta software, so it might be an error." and re-did the project in CS6. The exact same issue occured. I decided to test it in another browser. I opened it in Nightly (Firefox) and instead it blocked access to the link. I can't change the setting to allow it either (didn't show in the settings); so I don't know if it works there.
Here's my AS3 code:
var navURL2 = "http://" + (myXML.LINK[1]);
nav2.addEventListener(MouseEvent.CLICK, onClick2);
bg2.addEventListener(MouseEvent.CLICK, onClick2);
function onClick2(e:MouseEvent):void{
navigateToURL(new URLRequest(navURL2), "_blank");
and the XML: (I cut out the parts that aren't needed)
<LINK TITLE="">www.google.com</LINK>
What it's supposed to do:
It allows low-end users create a simple nav bar by editing elements in XML, and changing a link. You can change everything from the link, to the background of the swf.

I actually found the issue. Something was going on with my computer and wasn't allowing the links to be used on local host. But when I tested it on one of my websites, it ran find, then I had to add some exceptions and it started working corretly, thanks for the answer though.

GUI app by netbeans doesn't work outside IDE

I have created a GUI app using netbeans. it runs fine inside the ide. then i copied the compiled class files to j2se's bin folder where java.exe and javac.exe are located and to run it, it said Exception in thread "main" java.lang.NoClassDefFoundError:
I'm a c++ win32 vistuo studio user for long time. this java thing is really pissing me off. the app is no good if i can't run it outside the IDE. netbeans' site said i must include swing-layout-0.7.jar but without saying a word of HOW.
HELP!

If a user wanted to run a Swing application that was built using the GUI builder in NetBeans IDE, he/she would need to have the NetBeans Platform installed.Thats not true, to run a Swing app thats been developed in Netbeans and references classes that are part of the NetBeans API does not require the NetBeans platform to be installed on the target machine, you would have to include in ur App the jar files you are referencing from the NetBeans IDE.

Microsoft Exam Questions On Functionality That Doesn't Work!

What does a student do if they are tested, in a Microsoft exam, on functionality that's known not to work?!
It seems absurd that Microsoft is doing this.

Assume it does work when you take the exam.
How can functionality that doesn't work outside of the exam suddenly and mysteriously work in the exam? that doesn't make sense!
Turn a blind eye toward "real world" experiences in these types of cases.
Turning a blind eye to functionality that doesn't work isn't the correct solution: fixing the software or removing the question
from the exam is.
Be sure to mark the exam questions that you disagree with.
- and what happens if the student concerned did not think to do this at this time but only after she had time
to think about it afterwards?
Thank you for your contribution but I feel that it does not really address the problem I have highlighted.

EA4500 guest network re-authentication doesn't work

I have successfully set up a guest network on my EA4500. Guest laptop associates with guest SSID just fine. Then via IE, it gets prompted for the guest password, which is entered and accepted just fine. At this point guest laptop is on the network. Hooray!
BUT... at some point the guest laptop will need to reauthenticate (I don't know what the timeout is, but maybe one or two days?). Anyway, it's at this point that IE presents the guest network login page. But now after typing in the password, "enter" or clicking on the button does nothing. It looks like the guest web page doesn't get loaded properly or completely, so the reauthentication can't complete, therefore can't get to the internet. So, while in this state, I've also tried Firefox and Chrome, and same thing, no action when trying to submit the guest password. Tried rebooting guest laptop, and still same problem. Only thing I've found so far that works is to reboot the router. So I'm guessing there's a problem with the guest/web server on the router?? It's a real pain to have to reboot the router every day or two, when I've had other Linksys routers run for months without having to touch them.
I was running CCC 2.1.38 when I first noticed the problem. Since then I've downgraded to Classic 2.0.37, but it seems I still have the same problem. Again, I can connect & authenticate just fine initially, but when reprompted after some period of time, it doesn't work.
I've tried contacting Cisco support, but it looks like I'm at 91 days since purchase and thus outside of my 90-day complimentary support, so they happily provided me with the premium support options just to have the honor of talking with them. Guess I shouldn't have spent so much time trying to figure this out myself.
I've searched the forums here,but so far haven't found any answers (I do see posts where the guest web page isn't presented at all, but in my case the page is presented, just can't do anything). Anyone seen this or have any ideas?

jaymay -- I agree there's no harm in a reset; just the time to reconfigure, reenter DHCP reservations, etc. I'll keep this as an option as I troubleshoot, but see next...
TEXXSHARKK -- good news/bad news ... I ended up not yet resetting. Instead, since I had this problem first with CCC firmware 2.1.38 (Build 138828 - the automatically pushed update), I reverted back to Classic 2.0.37. Still same problem with guest re-authentication. Only workaround was to reboot the router. That's when I first posted.
So, since I had the problem with both CCC and Classic firmware, I ended up going back to CCC. To do that, I needed to manually update, which is 2.1.38 (Build 138880 for web manual download only). SInce (re)updating the firmware, I haven't had a repeat of the original problem. It's been about a week now, and the guest laptop has gone through a number of re-authentications, all without problem. For continued troubleshooting, I've been periodically connecting my iPad, BlackBerry, etc, to the guest network, and they get through the authentication page just fine as well. So that's the good news in that the problem "seems" to have gone away.
The bad news is that it's still unexplained:
- There's what I assume is a just a minor build difference between the two CCC firmwares, so it seems unlikely that would make a difference?
- Could be just the fact of reburning the firmware corrected whatever the problem was -- a la doing a reset, even though I didn't reconfigure, just firmware (re)update
- Could be the problem is still there biding its time, waiting for me to think it's forever gone, only to pounce again
If the problem does reappear, I'll update here.

[SOLVED] network randomly doesn't work after reboot (e100)

Hi
Lately I have some weird issues with network. I shutdown computer during night, so basicly I reboot it at least once per day and every now and then without any pattern network doesn't work at all and so far only solution I have found is to reboot (again).
Before anything else I'm sure it's not hardware problem, since other OS on same computer don't have any issues, neither is router since other devices in network from laptops to mobile phones work flawless.
Relevant info and what I have found so far (not everything is copy/pasted so there may be some typos):
$less rc.conf (network part)
eth1="eth1 192.168.1.242 netmask 255.255.255.0 broadcast 192.168.1.255
INTERFACES=(eth1)
gateway="default gw 192.168.1.1"
ROUTES=(gateway)
$ifconfig
eth1 Link encap:Ethernet HWaddr 00:D0:B7:5A:7A:A9
inet addr:192.168.1.242 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:380 errors:0 dropped:0 overruns:0 frame:0
TX packets:380 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:36154 (35.3 Kb) TX bytes:36154 (35.3 Kb)
$route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 * 255.255.255.0 U 0 0 0 eth1
default 192.168.1.1 0.0.0.0 UG 0 0 0 eth1
$ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data
From 192.168.1.242 icmp_seq=2 Destination Host Unreachable
So basicly network is dead, can't even ping router, cable connection is detected tho (lights are on). I have tried to restart newtork with /etc/rc.d/network stop/start, nothing. Only clue is dmesg.
$dmesg
Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:03:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
e100 0000:03:07.0: PME# disabled
e100: eth1: e100_probe: addr 0xfdfff000, irq 17, MAC addr 00:d0:b7:5a:7a:a9
e100 0000:03:07.0: firmware: requesting e100/d101m_ucode.bin
ADDRCONF(NETDEV_UP): eth1: link is not ready
modrope -r e100 and then reloading it doesn't help either, but reboot does (once I had to reboot twice tho).
Anyone with more clue and ideas then me, it's getting really annoying, it also kill whole KDE plasma-desktop for couple of minutes before plasmoids find out network is really down and I'm not really fan of morning "gamble". I can't pinpoint some hard date/update when this started to happening because like I said it's random but last couple of months should be quite accurate. Thanks in advance.
EDIT: dmesg when network works:
tilen@pikmin ~]$ dmesg | grep e100
pci 0000:03:07.0: Firmware left e100 interrupts enabled; disabling
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:03:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
e100 0000:03:07.0: PME# disabled
e100: eth0: e100_probe: addr 0xfdfff000, irq 17, MAC addr 00:d0:b7:5a:7a:a9
Last edited by NoOrdinary (2009-09-05 09:47:20)

I don't have anything special set at router but I doubt rc.conf play any role. I will try to set it up with dhcp (but I think I have tried that already) if there is any change.
This morning I had to reboot twice, so new kernel didn't help. Fowler, what network card are you using, also e100 (well or some intel)? I dunno, should this be handed to the kernel team? If it will piss me enough one morning I'll just go and buy a new network card, just wanna be sure that will really solve the problem.
UPDATE: OK, this is just silly. I remebered I have acctualy onboard LAN so I edited rc.conf and dived into the dust under my desk to move cable and there I found out it was acctual onboard in use all the time Now this dosen't make much sense to me anymore, when I can't get net up all the stuff in dmesg is e100 related. Anyway, I connected network to e100 and rebooted, suprise, same story. Dmesg reported again link was not ready. I edited rc.conf to
INTERFACES=(eth0 !eth1)
in case this has anything to do with proper timing at assigning whatever needs to be assigned to network cards at boot so I'm sure just 1 card with all info provided get's kicked in at boot. First reboot after that works, it dosen't prove anything yet but at leat it's some kind of progress in recognising proper cause.
UPDATE 2: Nah, still happens. Googling for "no link during initialization" show a lot of familiar problems, almost all on nforce motherboards and mine is nforce too. I just don't get it why this mess seperate PCI network card. In any case it's extremely annoying.
Last edited by NoOrdinary (2009-09-02 11:46:27)

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on that wifi network

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

HT4259 I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2. But no matter what I do or try, it doesn't work. What does happen is my internet gets block somehow when the Express looks like it's set up and 'green' - no in

I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2. But no matter what I do or try, it doesn't work. What does happen is my internet gets blocked somehow when the Express is online and looks like it's set up perfect and 'green' - but no internet connection for anything even though the Extreme is green and the modem is good. Once I disconnect the Express, everything is good again.
I've tried LAN, WAN, though a switch, direct connect, Extreme set to Extend the network, the Express set to be an extension. Most of the time I get an error trying to update the Express. But when it seems to be set up perfect, the entire house can't get to the internet. Just when it looks right, it is so wrong.
If anyone can give me exact steps (e.g., "...from the Base Station menu, select the Restore Default Setting option" vice "...just restore the defaults..."), I would greatly appreciate it. I'm left to the conclusion that the Express is faulty. I've been using Airport Utility 6.2 from Mountain Lion on one computer and Airport Utility 5.6.1 from Snow Leopard on another computer (the latter give more control while the former just want you to 'forget' the Express).

I finally got it working. I was trying to set it up ethernet. My biggest mistake was when the new Express came on, I did not select 'Continue' - I went straight to manual thinking that I would get the most setup options in manual mode. So everything I initially tried always resulted in 'wireless'. Even when I would update or restore default settings, the Express would not completely restart. Or sometimes I would get an error. So most of the time I had to unplug it. So when it came back up, none of my changes were retained. But there were a lot of times when everything was green and appeared to be fine. But anytime the ethernet cable was plugged in, no more internet.
So here's the weird part. When I finally tried 'continue' (vice manual), I would get 4 options. One would be 'ethernet' extended. So I would select it, it gave me green lights, all looked good, and still the same problem. This is when I got frustrated. I thought I had exhausted all possible combinations.
But somehow when trying continue again after another restore, I only got 3 options. One was the same ethernet extended option (can't remember what the missing 4th one was). And this time it worked - it gave me the big green circle with the checkmark saying it was successful. I don't know what I did different, but I know now that it won't work if 4 options come up to choose from. It will work if only 3 options come up. And success if only verified by the big checkmark. Had anyone anywhere said the checkmark declaring success is validation, then maybe I wouldn't have gone down so many rabbit holes thinking it should have been successful.
As for which Airport Utility I prefer, 6.2 looks nice, but it would just ignore the Express and would want me to 'forget' it and would not let me edit it. Airport Utility 5.6.1 was the one that I ended up using the most and finally had success with. It still strikes me as odd that there is no manually way to pick ethernet, it can only be choosen following a 'restore defaults', and only from the 3-option list (the 4-option list had the same ethernet choice, but it no worky).
Thanks for the response. I really do appreciate it.
Aiport Extreme Gen5 - internet access and router
Airport Express Gen2 - connected via ethernet, extending my wireless
- configured while connect directly to the Extreme, but now on a switch (16-port hub)
Using Airport 5.6.1
1) Restore Defaults from Base Station menu
2) Following restart, Select Continue
3) Of the 3 option presented, select 'ethernet.... extend network...'
- if 4 options are present, may not work
4) Wait for the green circle with the big white checkmark.
5) Connected Express to the switch where a cable went to other end of house - works.
Dead-zone went from 2mbps to 24mbps.
I probably spent 4 hours chasing my tail in anger. The correct way took about 5 minutes total.
Thanks again.

My MacBook isn't connecting to the Internet. When I try to connect, it shows the signal strength in the top right corner as if it was connected, but the Internet doesn't work. When I go to my network preferences, it says the ip is self-assigned.

My MacBook won't connect to the Internet, but it's connected to my router. When I go to network preferences, it says that it has a self assigned ip address, and can't connect to the Internet. How can I fix this? Please help!

First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly.

I updated my iphone 5 to ios 6.0.2. my wifi says its connected but doesn't work now. It doesn't matter what wifi network I connect to. It worked before updating my phone. I can no longer use facetime or use wifi at all. I'm not sure what to do to fix it.

I updated my iphone 5 to ios 6.0.2. my wifi says its connected but doesn't work now. It doesn't matter what wifi network I connect to. It worked before updating my phone. I can no longer use facetime or use wifi at all. I'm not sure what to do to fix it.

I'm having similar issues with my phone. I got my first iPhone recently, only had an iPod touch gen4 for a little over a year. Updated to 6.0.2 when we got the phone (iPhone 5) a few days before Christmas. When I got home on the evening of January 11, my phone would not connect the router anymore. I was able to get it to connect after resetting the phone and the router, updating the router, and manually connecting. That laste for a few minutes and then wouldn't work anymore. I live in an area with very limited service, we have a network extender installed to help, and I am barely getting a 3G signal at times.
My wife's iPad 4, my touchiPod 4, and all of our laptops are working just fine on the router. When I dropped my kid off at school today, I noticed that I am not even seeing the school network anymore from the parking lot where before I got 3 or 4 bars and could connect to their wifi when I was there. Today my phone goes back and forth between seeing my home network but not connecting, to not even seeing the network at all even from the same room that the router is in.
Hope Apple fixes this problem soon..............

SendMail doesn't work outside network

Similar Messages

Maybe you are looking for