Sendmail/Dovecot issue

I tried to set up a mailserver on my server, and it is possible to recieve mails normally. Strangely, whenever I connect to my server via a mailclient, it does not seem to get any emails, nor can I send any. The error message
May 25 15:47:37 thunderserver sm-mta[14374]: r4PDeNDN014241: SYSERR(root): Cannot exec /usr/bin/procmail: No such file or directory
makes me scratch my head. procmail is intalled, has a barebone config, and the file does exist. I triple checked it. Where could be the issue that 1. the mailclient cannot get mails from my server 2. cannot send any?
Thanks in advance

nh1256 wrote:Mar 09 06:03:31 mail postfix/pipe[18980]: EDC9B1C8047C: to=<[email protected]>, relay=dovecot, delay=592, delays=592/0.05/0/0.12, dsn=4.3.0, status=deferred (temporary failure)
The dovecot logs should tell why dovecot fails to accept the mail.

Similar Messages

  • Sendmail issue on Solaris 10 system...

    I have two systems running Solaris 10 that are having sendmail issues. If mail messages like the one below gets bounced back or if someone replies to it, the message will go to [email protected], and that should not happen. I believe I configured these systems the same way as the others and they seem to be fine. I have reconfigured the sendmail on the problems systems and I am still seeing messages going to [email protected] Below is what our reports should be sending to us and below that is what we should not be sending. How do I fix this problem? Can someone help, please. Thanks.
    CORRECT:
    -----Original Message-----
    From: root@nunode7 [mailto:[email protected]]
    Sent: Monday, December 11, 2006 0:04
    To: [email protected]
    Subject: Daily Security Report
    Begin report of failed attempts to 'su' for nunode7 on Sun Dec 10 2006
    No failed attempts to report
    End report of failed attempts to 'su' for nunode7 on Sun Dec 10 2006
    INCORRECT:
    -----Original Message-----
    From: root@nunode15 [mailto:[email protected]]
    Sent: Tuesday, December 12, 2006 0:01
    To: [email protected]
    Subject: Daily Security Report
    Begin report of failed attempts to 'su' for nunode15 on Mon Dec 11 2006
    No failed attempts to report
    End report of failed attempts to 'su' for nunode15 on Mon Dec 11 2006
    ---------------------------------------------------------------------

    So far it is happening for root. What do you suggest I do to fix it?
    Below is an example of what I have been seeing. If you look at "To", you will see where the problem is..."relay" should not be there. The host name should not be there either as the masquerading configuration is set up. Something is causing "relay" to appear and I cant seem to find what it is.
    -----Original Message-----
    From: [email protected]
    Sent: Friday, September 29, 2006 14:59
    To: [email protected]
    Subject: File Structures on node
    Message was edited by:
    DCMetroSunAdmin

  • Sendmail issue on solaris 10

    Hi,
    I am getting the following logs frequently on my solaris 10 server.
    Jun 30 16:52:01 <servername> sendmail[20814]: [ID 801593 mail.info] m5UFq10v020814: from=metron, size=536, class=0, nrcpts=1, msgid=<200806301552.m5UFq10v0208
    14@<servername>.>, relay=metron@localhost
    Jun 30 16:52:01 <servername> sendmail[20814]: [ID 801593 mail.info] m5UFq10v020814: to=metron, ctladdr=metron (104/4), delay=00:00:00, xdelay=00:00:00, mailer
    =relay, pri=30536, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
    Jun 30 16:54:01 <servername> sendmail[21265]: [ID 801593 mail.info] m5UFs0KJ021265: from=metron, size=536, class=0, nrcpts=1, msgid=<200806301554.m5UFs0KJ0212
    65@<servername>.>, relay=metron@localhost
    Could you please geve me an idea about the issue.
    Thanks in advance.

    So far it is happening for root. What do you suggest I do to fix it?
    Below is an example of what I have been seeing. If you look at "To", you will see where the problem is..."relay" should not be there. The host name should not be there either as the masquerading configuration is set up. Something is causing "relay" to appear and I cant seem to find what it is.
    -----Original Message-----
    From: [email protected]
    Sent: Friday, September 29, 2006 14:59
    To: [email protected]
    Subject: File Structures on node
    Message was edited by:
    DCMetroSunAdmin

  • Sendmail issues

    Hello all,
    I have Apache, PHP, MySQL and phpMyAdmin set up and running well on my iMac (10.5.4) development computer. I am trying to use the mail(); feature in PHP but I do not think everything is configured properly and am looking for some help. I have this simple script:
    <?php
    //phpinfo();
    $to = "[email protected]";
    $subject = "Hi!";
    $body= "Hi. \n\nHow are you?";
    if (mail($to, $subject, $body)) {
    echo ("Message Sent.");
    } else {
    echo ("Nope");
    ?>
    This is sitting on my testing Virtual Host. I receive the Message Sent part but I never receive an email to my account. Looking through the log files (/var/log/mail), I see a lot of connection refused issues. Here are a couple of lines from the log:
    Aug 28 12:29:27 Malachai postfix/smtp[2888]: connect to mx00.1and1.com[74.208.5.3]: Connection refused (port 25)
    Aug 28 12:29:27 Malachai postfix/smtp[2888]: 365B8117403: to=<[email protected]>, relay=none, delay=32, delays=0.05/0.08/32/0, dsn=4.4.1, status=deferred (connect to mx00.1and1.com[74.208.5.3]: Connection refused)
    Can anyone help me troubleshoot this?
    Thanks,
    Clay

    Welcome to the Apple forums:
    Not to discourage you from posing here, but you might do better reposting in our Unix forum here:
    http://discussions.apple.com/forum.jspa?forumID=735
    The reason is that most of the users that hang out in the Unix forum are probably much more familiar with sendmail, php, terminal usage, etc., than are the users here.

  • Php sendmail issue

    Has anyone been able to get php sendmail to work on Yosemite? If so is there any complete documentation or hey how about a script to fix it. That should have been part of Server app.

    Hah, lol, my bad, didn't think about that. Worked when I did.

  • SENDmail issue to Lotus Notes Reciever

    Hi All,
    The SENDmail function of SAP has been working great in the PROD system. However, there was a problem regarding the Lotus Notes side.
    The reciever in the Lotus Notes experienced an error stated as : 'Sorry, an uncorrectable error has occured. Invalid pool free chain. Press ENTER to abort application.'
    The SENDmail step is forwarded to the Lotus Notes using Auto Forwarding.
    I also configured an Extended Notification for workitems. But this excludes the SENDmail step ( textmail ).
    Does SAP usea java applet or some sort for this? And what is that applet, if there is?
    Thanks guys!
    Please guide me on this.
    Very much pleased with your suggestions,
    Reymar

    Hi Dheepak,
    I'm also sure that this is not an error in the SAP side. However, I am also involved in pointing out the cause of the error in the Lotus Notes side.
    It is expected that the Text Mail can be read in the Lotus Notes email client. I also tried to forward  the SAPmail (text mail) in MS Outlook and it worked fine. There seems to be a problem in the employee's Lotus Notes mail.
    However, the workitem sending in Lotus Notes (with links) works fine. It means, the Lotus Notes and SAP Workflow has been properly connected.
    The only error that occured was the error I stated above. I'm sure that this may involve Lotus Notes user settings. I hope those people who know SAP as well as Lotus Notes may help me on this.
    P.S. DUET is not used in this config. The SAP - Lotus Notes connection was configured using Extended Notification.
    Regards,
    Reymar
    Edited by: Reymar Ellazo on Jul 2, 2008 3:32 AM

  • Sendmail & SunOne Messaging Server issue

    Hi,
    I am trying to run SunOne messaging server & sendmail on same sun box. When i run [b][b]sendmail it gives me an error message " This server is running iPlanet Internet Mail; skipping Sendmail startup." even though i have stopped all SunOne messaging services. if i do netstat -an|grep for 25 & 110 it does not show anything.
    Is it possible to run sendmail & iplanet messaging server on same box if we configue sendmail on some different port? If yes, how to configure sendmail on different port for solaris9?
    Thanks for your help.
    ---Rajeev

    Why would you want to do that?
    iMS offers sendmail compatibility, for command-line sending, as needed.
    I admit, I'm not familiar with configuring sendmail to use different ports. You'd have to look to sendmail experts for that.
    The message you get during startup is simply how we bypass the startup of sendmail when we install iMS. If you stop iMS, you should be able to start sendmail, ASSUMING that you use the re-named sendmail binary that we move to "sendmail.bak" on iMS installation.

  • Sendmail auth/ident checking issue

    Hi All,
    I have a problem sending mail to a host which seems to have sendmail configured to use Ident port (113) to check back on the mail sender. The host is Sol 9 and sendmail version is 8.13.8+Sun/8.12.9.
    My problem is that this port is not enabled on the firewalls between sender and receiver so the ident checking and hence the mail is failing and I need to turn this checking off.
    I modified sendmail.cf to include an ident timeout "O Timeout.ident=0s" which I believe is supposed to eliminate this checking yet firewall logs indicate it is still happening.
    I can telnet the server on port 25 and have dialogue with the mail server and even supposedly leave a mail though when I try to check it on the host it says there is none.
    Any advice on how to get the mail through - particularly any more sendmail.cf settings - would be greatly appreciated.
    cheers,

    Well, um, no.
    tcp_auth is never the first channel a message hits. It's only switched there after authentication happens.
    It sould like you're more interested in what the "from" is than if the user authenticates, right?
    Your messages will be hitting tcp_local first, then possibly switching to tcp_intranet, or tcp_auth
    Likely, the easiest way to do what you want is through somthing in mappings, or through a sieve filter.

  • SSL Issue with Dovecot Mac OS X Server 10.6.8

    I run IMAP mail on SL Server using SSL. It's been running beautifully for a year or so till my (self signed) certificate expired. I created a new cert and configured SMTP & IMAP to use the new cert. SMTP is fine but IMAP refuses to use the cert. The message i get in the log is :mail dovecot [32551] can't use etc/ssl/certs/dovecot.pem no such file or directory. Invalid configuration, keeping old one. SSL simply doesn't start.
    I've been right through the dovecot.conf file and checked and nowhere in the file is that location referred to. All the times SSL is mentioned in the conf file the correct location is referred to. I've looked and the certs are where they are supposed to be.
    So what other configuration file can dovecot possibly be referring to when it attempts to load the new configuration after I've made changes using server admin?
    I've even loaded a default conf file and started fresh and the same thing happens.
    Appreciate any ideas
    Mac OS X Server 10.6.8
    Rob

    Never Mind, I figured it out.

  • Developer Toolbox SendMail issue

    Hi all
    I need to show the name of a chosen option that is from a
    dynamically generated dropdown in an input form.
    These input details are emailed.
    All this works but I get the integer value of the foreign key
    not the name
    I understand the I need to set a new recordset filtered by
    the posted value from the form but for the life of me I cannot get
    the name from the foreign keyed table to show in the received
    email???
    Can someone explain how to do this please as its driving me
    potty!

    Is the form posting back to the server or is the submit
    button set to send the e-mail? If your posting back to the server,
    you can making a simple page where the body content is what you
    want in the e-mail.
    That should make it easier to debug. Once you have the page
    generating the text you want, if should be easy to get the e-mail
    to use the same text.
    Hope the helps,
    Chris

  • Sendmail issue

    I have installed MTA on one box against directory server & messaging server 6 on another box. During install when i install messaging server i configures it in such a way configuration of Messaging server resides on local directory & USER/Group resides on another box on DS.
    I can login to test@mydomain account through web mail that resides on 2'nd box.
    But when i try to send mail using command prompt through telnet from 1'st box it says :
    HELO
    MAIL FROM: [email protected]
    250 2.5.0 Address Ok.
    RCPT TO: [email protected]
    550 5.1.1 unknown or illegal alias: [email protected]
    Any idea's?

    I have installed MTA on one box against directory server & messaging server 6 on another box. During install when i install messaging server i configures it in such a way configuration of Messaging server resides on local directory & USER/Group resides on another box on DS.
    I can login to test@mydomain account through web mail that resides on 2'nd box.
    But when i try to send mail using command prompt through telnet from 1'st box it says :
    HELO
    MAIL FROM: [email protected]
    250 2.5.0 Address Ok.
    RCPT TO: [email protected]
    550 5.1.1 unknown or illegal alias: [email protected]
    Any idea's?

  • [SOLVED]Issue with Postfix sending to external mail addresses

    I'm having a very silly issue with Postfix. I followed the wiki article at [link]https://wiki.archlinux.org/index.php/Postfix[/link], and everything seems to work properly, however I cannot send to emails outside of my domain.
    I get the error:
    550 5.1.1 <[email protected]>: Recipient address rejected: Local delivery only!
    Here is what the logs say:
    May 08 16:05:12 my.dns.stuff.org postfix/smtpd[31464]: connect from localhost.localdomain[127.0.0.1]
    May 08 16:05:12 my.dns.stuff.org postfix/smtpd[31464]: 091E011E3C: client=localhost.localdomain[127.0.0.1]
    May 08 16:05:12 my.dns.stuff.org postfix/smtpd[31464]: 091E011E3C: reject: RCPT from localhost.localdomain[127.0.0.1]: 550 5.1.1 <[email protected]>: Recipient address rejected: Local delivery only!; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<sendingdomain.com>
    May 08 16:05:12 my.dns.stuff.org postfix/smtpd[31464]: lost connection after RCPT from localhost.localdomain[127.0.0.1]
    May 08 16:05:12 my.dns.stuff.org postfix/smtpd[31464]: disconnect from localhost.localdomain[127.0.0.1]
    May 08 16:05:14 my.dns.stuff.org sudo[31476]: me : TTY=pts/0 ; PWD=/etc/postfix ; USER=root ; COMMAND=/usr/bin/journalctl
    main.cf
    # Global Postfix configuration file. This file lists only a subset
    # of all parameters. For the syntax, and for a complete parameter
    # list, see the postconf(5) manual page (command: "man 5 postconf").
    # For common configuration examples, see BASIC_CONFIGURATION_README
    # and STANDARD_CONFIGURATION_README. To find these documents, use
    # the command "postconf html_directory readme_directory", or go to
    # http://www.postfix.org/BASIC_CONFIGURATION_README.html etc.
    # For best results, change no more than 2-3 parameters at a time,
    # and test if Postfix still works after every change.
    # SOFT BOUNCE
    # The soft_bounce parameter provides a limited safety net for
    # testing. When soft_bounce is enabled, mail will remain queued that
    # would otherwise bounce. This parameter disables locally-generated
    # bounces, and prevents the SMTP server from rejecting mail permanently
    # (by changing 5xx replies into 4xx replies). However, soft_bounce
    # is no cure for address rewriting mistakes or mail routing mistakes.
    #soft_bounce = no
    # LOCAL PATHNAME INFORMATION
    # The queue_directory specifies the location of the Postfix queue.
    # This is also the root directory of Postfix daemons that run chrooted.
    # See the files in examples/chroot-setup for setting up Postfix chroot
    # environments on different UNIX systems.
    queue_directory = /var/spool/postfix
    # The command_directory parameter specifies the location of all
    # postXXX commands.
    command_directory = /usr/bin
    # The daemon_directory parameter specifies the location of all Postfix
    # daemon programs (i.e. programs listed in the master.cf file). This
    # directory must be owned by root.
    daemon_directory = /usr/lib/postfix
    # The data_directory parameter specifies the location of Postfix-writable
    # data files (caches, random numbers). This directory must be owned
    # by the mail_owner account (see below).
    data_directory = /var/lib/postfix
    # QUEUE AND PROCESS OWNERSHIP
    # The mail_owner parameter specifies the owner of the Postfix queue
    # and of most Postfix daemon processes. Specify the name of a user
    # account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
    # AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
    # particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
    # USER.
    mail_owner = postfix
    # The default_privs parameter specifies the default rights used by
    # the local delivery agent for delivery to external file or command.
    # These rights are used in the absence of a recipient user context.
    # DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
    #default_privs = nobody
    # INTERNET HOST AND DOMAIN NAMES
    # The myhostname parameter specifies the internet hostname of this
    # mail system. The default is to use the fully-qualified domain name
    # from gethostname(). $myhostname is used as a default value for many
    # other configuration parameters.
    #myhostname = host.domain.tld
    myhostname = mail.sendingdomain.com
    # The mydomain parameter specifies the local internet domain name.
    # The default is to use $myhostname minus the first component.
    # $mydomain is used as a default value for many other configuration
    # parameters.
    mydomain = www.sendingdomain.com
    # SENDING MAIL
    # The myorigin parameter specifies the domain that locally-posted
    # mail appears to come from. The default is to append $myhostname,
    # which is fine for small sites. If you run a domain with multiple
    # machines, you should (1) change this to $mydomain and (2) set up
    # a domain-wide alias database that aliases each user to
    # [email protected].
    # For the sake of consistency between sender and recipient addresses,
    # myorigin also specifies the default domain name that is appended
    # to recipient addresses that have no @domain part.
    #myorigin = $myhostname
    myorigin = $mydomain
    append_dot_mydomain = no
    # RECEIVING MAIL
    # The inet_interfaces parameter specifies the network interface
    # addresses that this mail system receives mail on. By default,
    # the software claims all active interfaces on the machine. The
    # parameter also controls delivery of mail to user@[ip.address].
    # See also the proxy_interfaces parameter, for network addresses that
    # are forwarded to us via a proxy or network address translator.
    # Note: you need to stop/start Postfix when this parameter changes.
    inet_interfaces = all
    #inet_interfaces = loopback-only
    #inet_interfaces = $myhostname
    #inet_interfaces = $myhostname, localhost
    # The proxy_interfaces parameter specifies the network interface
    # addresses that this mail system receives mail on by way of a
    # proxy or network address translation unit. This setting extends
    # the address list specified with the inet_interfaces parameter.
    # You must specify your proxy/NAT addresses when your system is a
    # backup MX host for other domains, otherwise mail delivery loops
    # will happen when the primary MX host is down.
    #proxy_interfaces =
    #proxy_interfaces = 1.2.3.4
    # The mydestination parameter specifies the list of domains that this
    # machine considers itself the final destination for.
    # These domains are routed to the delivery agent specified with the
    # local_transport parameter setting. By default, that is the UNIX
    # compatible delivery agent that lookups all recipients in /etc/passwd
    # and /etc/aliases or their equivalent.
    # The default is $myhostname + localhost.$mydomain. On a mail domain
    # gateway, you should also include $mydomain.
    # Do not specify the names of virtual domains - those domains are
    # specified elsewhere (see VIRTUAL_README).
    # Do not specify the names of domains that this machine is backup MX
    # host for. Specify those names via the relay_domains settings for
    # the SMTP server, or use permit_mx_backup if you are lazy (see
    # STANDARD_CONFIGURATION_README).
    # The local machine is always the final destination for mail addressed
    # to user@[the.net.work.address] of an interface that the mail system
    # receives mail on (see the inet_interfaces parameter).
    # Specify a list of host or domain names, /file/name or type:table
    # patterns, separated by commas and/or whitespace. A /file/name
    # pattern is replaced by its contents; a type:table is matched when
    # a name matches a lookup key (the right-hand side is ignored).
    # Continue long lines by starting the next line with whitespace.
    # See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
    #mydestination = $myhostname, localhost.$mydomain, localhost
    #mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
    mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
    #mydestination = localhost
    # mail.$mydomain, www.$mydomain, ftp.$mydomain
    # REJECTING MAIL FOR UNKNOWN LOCAL USERS
    # The local_recipient_maps parameter specifies optional lookup tables
    # with all names or addresses of users that are local with respect
    # to $mydestination, $inet_interfaces or $proxy_interfaces.
    # If this parameter is defined, then the SMTP server will reject
    # mail for unknown local users. This parameter is defined by default.
    # To turn off local recipient checking in the SMTP server, specify
    # local_recipient_maps = (i.e. empty).
    # The default setting assumes that you use the default Postfix local
    # delivery agent for local delivery. You need to update the
    # local_recipient_maps setting if:
    # - You define $mydestination domain recipients in files other than
    # /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
    # For example, you define $mydestination domain recipients in
    # the $virtual_mailbox_maps files.
    # - You redefine the local delivery agent in master.cf.
    # - You redefine the "local_transport" setting in main.cf.
    # - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
    # feature of the Postfix local delivery agent (see local(8)).
    # Details are described in the LOCAL_RECIPIENT_README file.
    # Beware: if the Postfix SMTP server runs chrooted, you probably have
    # to access the passwd file via the proxymap service, in order to
    # overcome chroot restrictions. The alternative, having a copy of
    # the system passwd file in the chroot jail is just not practical.
    # The right-hand side of the lookup tables is conveniently ignored.
    # In the left-hand side, specify a bare username, an @domain.tld
    # wild-card, or specify a [email protected] address.
    #local_recipient_maps = unix:passwd.byname $alias_maps
    local_recipient_maps = proxy:unix:passwd.byname $alias_maps
    #local_recipient_maps =
    # The unknown_local_recipient_reject_code specifies the SMTP server
    # response code when a recipient domain matches $mydestination or
    # ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
    # and the recipient address or address local-part is not found.
    # The default setting is 550 (reject mail) but it is safer to start
    # with 450 (try again later) until you are certain that your
    # local_recipient_maps settings are OK.
    unknown_local_recipient_reject_code = 550
    # TRUST AND RELAY CONTROL
    # The mynetworks parameter specifies the list of "trusted" SMTP
    # clients that have more privileges than "strangers".
    # In particular, "trusted" SMTP clients are allowed to relay mail
    # through Postfix. See the smtpd_recipient_restrictions parameter
    # in postconf(5).
    # You can specify the list of "trusted" network addresses by hand
    # or you can let Postfix do it for you (which is the default).
    # By default (mynetworks_style = subnet), Postfix "trusts" SMTP
    # clients in the same IP subnetworks as the local machine.
    # On Linux, this does works correctly only with interfaces specified
    # with the "ifconfig" command.
    # Specify "mynetworks_style = class" when Postfix should "trust" SMTP
    # clients in the same IP class A/B/C networks as the local machine.
    # Don't do this with a dialup site - it would cause Postfix to "trust"
    # your entire provider's network. Instead, specify an explicit
    # mynetworks list by hand, as described below.
    # Specify "mynetworks_style = host" when Postfix should "trust"
    # only the local machine.
    #mynetworks_style = class
    #mynetworks_style = subnet
    mynetworks_style = host
    # Alternatively, you can specify the mynetworks list by hand, in
    # which case Postfix ignores the mynetworks_style setting.
    # Specify an explicit list of network/netmask patterns, where the
    # mask specifies the number of bits in the network part of a host
    # address.
    # You can also specify the absolute pathname of a pattern file instead
    # of listing the patterns here. Specify type:table for table-based lookups
    # (the value on the table right-hand side is not used).
    #mynetworks = 168.100.189.0/28, 127.0.0.0/8
    #mynetworks = $config_directory/mynetworks
    #mynetworks = hash:/etc/postfix/network_table
    # The relay_domains parameter restricts what destinations this system will
    # relay mail to. See the smtpd_recipient_restrictions description in
    # postconf(5) for detailed information.
    # By default, Postfix relays mail
    # - from "trusted" clients (IP address matches $mynetworks) to any destination,
    # - from "untrusted" clients to destinations that match $relay_domains or
    # subdomains thereof, except addresses with sender-specified routing.
    # The default relay_domains value is $mydestination.
    # In addition to the above, the Postfix SMTP server by default accepts mail
    # that Postfix is final destination for:
    # - destinations that match $inet_interfaces or $proxy_interfaces,
    # - destinations that match $mydestination
    # - destinations that match $virtual_alias_domains,
    # - destinations that match $virtual_mailbox_domains.
    # These destinations do not need to be listed in $relay_domains.
    # Specify a list of hosts or domains, /file/name patterns or type:name
    # lookup tables, separated by commas and/or whitespace. Continue
    # long lines by starting the next line with whitespace. A file name
    # is replaced by its contents; a type:name table is matched when a
    # (parent) domain appears as lookup key.
    # NOTE: Postfix will not automatically forward mail for domains that
    # list this system as their primary or backup MX host. See the
    # permit_mx_backup restriction description in postconf(5).
    relay_domains = $mydestination
    # INTERNET OR INTRANET
    # The relayhost parameter specifies the default host to send mail to
    # when no entry is matched in the optional transport(5) table. When
    # no relayhost is given, mail is routed directly to the destination.
    # On an intranet, specify the organizational domain name. If your
    # internal DNS uses no MX records, specify the name of the intranet
    # gateway host instead.
    # In the case of SMTP, specify a domain, host, host:port, [host]:port,
    # [address] or [address]:port; the form [host] turns off MX lookups.
    # If you're connected via UUCP, see also the default_transport parameter.
    #relayhost = $mydomain
    #relayhost = [gateway.my.domain]
    #relayhost = [mailserver.isp.tld]
    #relayhost = uucphost
    #relayhost = [an.ip.add.ress]
    default_transport = error: Local delivery only!
    # REJECTING UNKNOWN RELAY USERS
    # The relay_recipient_maps parameter specifies optional lookup tables
    # with all addresses in the domains that match $relay_domains.
    # If this parameter is defined, then the SMTP server will reject
    # mail for unknown relay users. This feature is off by default.
    # The right-hand side of the lookup tables is conveniently ignored.
    # In the left-hand side, specify an @domain.tld wild-card, or specify
    # a [email protected] address.
    #relay_recipient_maps = hash:/etc/postfix/relay_recipients
    # INPUT RATE CONTROL
    # The in_flow_delay configuration parameter implements mail input
    # flow control. This feature is turned on by default, although it
    # still needs further development (it's disabled on SCO UNIX due
    # to an SCO bug).
    # A Postfix process will pause for $in_flow_delay seconds before
    # accepting a new message, when the message arrival rate exceeds the
    # message delivery rate. With the default 100 SMTP server process
    # limit, this limits the mail inflow to 100 messages a second more
    # than the number of messages delivered per second.
    # Specify 0 to disable the feature. Valid delays are 0..10.
    #in_flow_delay = 1s
    # ADDRESS REWRITING
    # The ADDRESS_REWRITING_README document gives information about
    # address masquerading or other forms of address rewriting including
    # username->Firstname.Lastname mapping.
    # ADDRESS REDIRECTION (VIRTUAL DOMAIN)
    # The VIRTUAL_README document gives information about the many forms
    # of domain hosting that Postfix supports.
    # "USER HAS MOVED" BOUNCE MESSAGES
    # See the discussion in the ADDRESS_REWRITING_README document.
    # TRANSPORT MAP
    # See the discussion in the ADDRESS_REWRITING_README document.
    # ALIAS DATABASE
    # The alias_maps parameter specifies the list of alias databases used
    # by the local delivery agent. The default list is system dependent.
    # On systems with NIS, the default is to search the local alias
    # database, then the NIS alias database. See aliases(5) for syntax
    # details.
    # If you change the alias database, run "postalias /etc/aliases" (or
    # wherever your system stores the mail alias file), or simply run
    # "newaliases" to build the necessary DBM or DB file.
    # It will take a minute or so before changes become visible. Use
    # "postfix reload" to eliminate the delay.
    #alias_maps = dbm:/etc/aliases
    #alias_maps = hash:/etc/aliases
    #alias_maps = hash:/etc/aliases, nis:mail.aliases
    #alias_maps = netinfo:/aliases
    alias_maps = hash:/etc/postfix/aliases
    # The alias_database parameter specifies the alias database(s) that
    # are built with "newaliases" or "sendmail -bi". This is a separate
    # configuration parameter, because alias_maps (see above) may specify
    # tables that are not necessarily all under control by Postfix.
    #alias_database = dbm:/etc/aliases
    #alias_database = dbm:/etc/mail/aliases
    #alias_database = hash:/etc/aliases
    #alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
    alias_database = $alias_maps
    # ADDRESS EXTENSIONS (e.g., user+foo)
    # The recipient_delimiter parameter specifies the separator between
    # user names and address extensions (user+foo). See canonical(5),
    # local(8), relocated(5) and virtual(5) for the effects this has on
    # aliases, canonical, virtual, relocated and .forward file lookups.
    # Basically, the software tries user+foo and .forward+foo before
    # trying user and .forward.
    #recipient_delimiter = +
    # DELIVERY TO MAILBOX
    # The home_mailbox parameter specifies the optional pathname of a
    # mailbox file relative to a user's home directory. The default
    # mailbox file is /var/spool/mail/user or /var/mail/user. Specify
    # "Maildir/" for qmail-style delivery (the / is required).
    #home_mailbox = Mailbox
    home_mailbox = Maildir/
    # The mail_spool_directory parameter specifies the directory where
    # UNIX-style mailboxes are kept. The default setting depends on the
    # system type.
    #mail_spool_directory = /var/mail
    #mail_spool_directory = /var/spool/mail
    # The mailbox_command parameter specifies the optional external
    # command to use instead of mailbox delivery. The command is run as
    # the recipient with proper HOME, SHELL and LOGNAME environment settings.
    # Exception: delivery for root is done as $default_user.
    # Other environment variables of interest: USER (recipient username),
    # EXTENSION (address extension), DOMAIN (domain part of address),
    # and LOCAL (the address localpart).
    # Unlike other Postfix configuration parameters, the mailbox_command
    # parameter is not subjected to $parameter substitutions. This is to
    # make it easier to specify shell syntax (see example below).
    # Avoid shell meta characters because they will force Postfix to run
    # an expensive shell process. Procmail alone is expensive enough.
    # IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
    # ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
    #mailbox_command = /some/where/procmail
    #mailbox_command = /some/where/procmail -a "$EXTENSION"
    # The mailbox_transport specifies the optional transport in master.cf
    # to use after processing aliases and .forward files. This parameter
    # has precedence over the mailbox_command, fallback_transport and
    # luser_relay parameters.
    # Specify a string of the form transport:nexthop, where transport is
    # the name of a mail delivery transport defined in master.cf. The
    # :nexthop part is optional. For more details see the sample transport
    # configuration file.
    # NOTE: if you use this feature for accounts not in the UNIX password
    # file, then you must update the "local_recipient_maps" setting in
    # the main.cf file, otherwise the SMTP server will reject mail for
    # non-UNIX accounts with "User unknown in local recipient table".
    # Cyrus IMAP over LMTP. Specify ``lmtpunix cmd="lmtpd"
    # listen="/var/imap/socket/lmtp" prefork=0'' in cyrus.conf.
    #mailbox_transport = lmtp:unix:/var/imap/socket/lmtp
    # Cyrus IMAP via command line. Uncomment the "cyrus...pipe" and
    # subsequent line in master.cf.
    #mailbox_transport = cyrus
    # The fallback_transport specifies the optional transport in master.cf
    # to use for recipients that are not found in the UNIX passwd database.
    # This parameter has precedence over the luser_relay parameter.
    # Specify a string of the form transport:nexthop, where transport is
    # the name of a mail delivery transport defined in master.cf. The
    # :nexthop part is optional. For more details see the sample transport
    # configuration file.
    # NOTE: if you use this feature for accounts not in the UNIX password
    # file, then you must update the "local_recipient_maps" setting in
    # the main.cf file, otherwise the SMTP server will reject mail for
    # non-UNIX accounts with "User unknown in local recipient table".
    #fallback_transport = lmtp:unix:/file/name
    #fallback_transport = cyrus
    #fallback_transport =
    # The luser_relay parameter specifies an optional destination address
    # for unknown recipients. By default, mail for unknown@$mydestination,
    # unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
    # as undeliverable.
    # The following expansions are done on luser_relay: $user (recipient
    # username), $shell (recipient shell), $home (recipient home directory),
    # $recipient (full recipient address), $extension (recipient address
    # extension), $domain (recipient domain), $local (entire recipient
    # localpart), $recipient_delimiter. Specify ${name?value} or
    # ${name:value} to expand value only when $name does (does not) exist.
    # luser_relay works only for the default Postfix local delivery agent.
    # NOTE: if you use this feature for accounts not in the UNIX password
    # file, then you must specify "local_recipient_maps =" (i.e. empty) in
    # the main.cf file, otherwise the SMTP server will reject mail for
    # non-UNIX accounts with "User unknown in local recipient table".
    #luser_relay = [email protected]
    #luser_relay = [email protected]
    #luser_relay = admin+$local
    # JUNK MAIL CONTROLS
    # The controls listed here are only a very small subset. The file
    # SMTPD_ACCESS_README provides an overview.
    # The header_checks parameter specifies an optional table with patterns
    # that each logical message header is matched against, including
    # headers that span multiple physical lines.
    # By default, these patterns also apply to MIME headers and to the
    # headers of attached messages. With older Postfix versions, MIME and
    # attached message headers were treated as body text.
    # For details, see "man header_checks".
    #header_checks = regexp:/etc/postfix/header_checks
    # FAST ETRN SERVICE
    # Postfix maintains per-destination logfiles with information about
    # deferred mail, so that mail can be flushed quickly with the SMTP
    # "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
    # See the ETRN_README document for a detailed description.
    # The fast_flush_domains parameter controls what destinations are
    # eligible for this service. By default, they are all domains that
    # this server is willing to relay mail to.
    #fast_flush_domains = $relay_domains
    # SHOW SOFTWARE VERSION OR NOT
    # The smtpd_banner parameter specifies the text that follows the 220
    # code in the SMTP server's greeting banner. Some people like to see
    # the mail version advertised. By default, Postfix shows no version.
    # You MUST specify $myhostname at the start of the text. That is an
    # RFC requirement. Postfix itself does not care.
    #smtpd_banner = $myhostname ESMTP $mail_name
    #smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
    # PARALLEL DELIVERY TO THE SAME DESTINATION
    # How many parallel deliveries to the same user or domain? With local
    # delivery, it does not make sense to do massively parallel delivery
    # to the same user, because mailbox updates must happen sequentially,
    # and expensive pipelines in .forward files can cause disasters when
    # too many are run at the same time. With SMTP deliveries, 10
    # simultaneous connections to the same domain could be sufficient to
    # raise eyebrows.
    # Each message delivery transport has its XXX_destination_concurrency_limit
    # parameter. The default is $default_destination_concurrency_limit for
    # most delivery transports. For the local delivery agent the default is 2.
    #local_destination_concurrency_limit = 2
    #default_destination_concurrency_limit = 20
    # DEBUGGING CONTROL
    # The debug_peer_level parameter specifies the increment in verbose
    # logging level when an SMTP client or server host name or address
    # matches a pattern in the debug_peer_list parameter.
    debug_peer_level = 2
    # The debug_peer_list parameter specifies an optional list of domain
    # or network patterns, /file/name patterns or type:name tables. When
    # an SMTP client or server host name or address matches a pattern,
    # increase the verbose logging level by the amount specified in the
    # debug_peer_level parameter.
    #debug_peer_list = 127.0.0.1
    #debug_peer_list = some.domain
    # The debugger_command specifies the external command that is executed
    # when a Postfix daemon program is run with the -D option.
    # Use "command .. & sleep 5" so that the debugger can attach before
    # the process marches on. If you use an X-based debugger, be sure to
    # set up your XAUTHORITY environment variable before starting Postfix.
    debugger_command =
    PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
    ddd $daemon_directory/$process_name $process_id & sleep 5
    # If you can't use X, use this to capture the call stack when a
    # daemon crashes. The result is in a file in the configuration
    # directory, and is named after the process name and the process ID.
    # debugger_command =
    # PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
    # echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
    # >$config_directory/$process_name.$process_id.log & sleep 5
    # Another possibility is to run gdb under a detached screen session.
    # To attach to the screen sesssion, su root and run "screen -r
    # <id_string>" where <id_string> uniquely matches one of the detached
    # sessions (from "screen -list").
    # debugger_command =
    # PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
    # -dmS $process_name gdb $daemon_directory/$process_name
    # $process_id & sleep 1
    # INSTALL-TIME CONFIGURATION INFORMATION
    # The following parameters are used when installing a new Postfix version.
    # sendmail_path: The full pathname of the Postfix sendmail command.
    # This is the Sendmail-compatible mail posting interface.
    sendmail_path = /usr/bin/sendmail
    # newaliases_path: The full pathname of the Postfix newaliases command.
    # This is the Sendmail-compatible command to build alias databases.
    newaliases_path = /usr/bin/newaliases
    # mailq_path: The full pathname of the Postfix mailq command. This
    # is the Sendmail-compatible mail queue listing command.
    mailq_path = /usr/bin/mailq
    # setgid_group: The group for mail submission and queue management
    # commands. This must be a group name with a numerical group ID that
    # is not shared with other accounts, not even with the Postfix account.
    setgid_group = postdrop
    # html_directory: The location of the Postfix HTML documentation.
    html_directory = no
    # manpage_directory: The location of the Postfix on-line manual pages.
    manpage_directory = /usr/share/man
    # sample_directory: The location of the Postfix sample configuration files.
    # This parameter is obsolete as of Postfix 2.1.
    sample_directory = /etc/postfix/sample
    # readme_directory: The location of the Postfix README files.
    readme_directory = /usr/share/doc/postfix
    inet_protocols = ipv4
    #virtual_mailbox_domains = sendingdomain.com
    virtual_alias_maps = hash:/etc/postfix/virtual_alias, mysql:/etc/postfix/mysql_virtual_forwards.cf
    virtual_mailbox_domains = mysql:/etc/postfix/mysql_virtual_domains.cf
    virtual_mailbox_maps = mysql:/etc/postfix/mysql_virtual_mailboxes.cf
    virtual_mailbox_base = /home/vmailer
    virtual_uid_maps = static:5003
    virtual_gid_maps = static:5003
    virtual_minimum_uid = 5003
    virtual_mailbox_limit = 51200000
    Any help would be appreciated. Thank you.
    Last edited by nadman10 (2014-05-14 14:36:10)

    Your main.cf seems redundant.
    For example:
    if you specify:
    virtual_alias_maps = hash:/etc/postfix/virtual_alias, mysql:/etc/postfix/mysql_virtual_forwards.cf
    you don't need this:
    alias_maps = hash:/etc/postfix/aliases
    and i think you have a lot of more options you don't need.
    This is my main.cf on my vps and everything works great (sending and receiving emails from/to most common mail server: gmail, hotmail etc etc)
    smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU)
    biff = no
    # appending .domain is the MUA's job.
    append_dot_mydomain = no
    readme_directory = no
    # TLS parameters
    smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
    smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
    smtpd_use_tls=yes
    smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
    smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache
    message_size_limit = 4194304
    virtual_mailbox_domains = mysql:/etc/postfix/mysql-virtual-mailbox-domains.cf
    virtual_mailbox_maps = mysql:/etc/postfix/mysql-virtual-mailbox-maps.cf
    virtual_alias_maps = mysql:/etc/postfix/mysql-virtual-alias-maps.cf
    virtual_transport = dovecot
    dovecot_destination_recipient_limit = 1
    it is very simple (no dkim, no forced tls, no mailbox limits and so on) and it can be improved but it works..
    as I suggested you just try spending some hour wiping postfix installation and giving a look to this guide

  • Main.cf issue !!!

    Hi to all !!!
    I need your help on a strange issue with main.cf file
    I have comment the following two lines
    #smtpd_helo_required = yes
    #smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
    in order to avoid the delivery mail delay....
    The strange thing is that the above two lines reappears fter 2-3 days at the end of the file with out comment ???
    Any idea why this happe ???
    Alll the above running under SL 10.6.8
    Many Thanks for your help

    Hi
    The article is totaly clear...
    At this point let me clear something... From what can I see in my logs there are no issue with bad HELO on my local network as you can see as well in the logs here after...
    NOQUEUE: reject: RCPT from
    114-42-136-146.dynamic.hinet.net[114.42.xxx.xxx]: 504 5.5.2 <62.1.xx.xxx>:
    Helo command rejected: need fully-qualified hostname;
    from=<[email protected]> to=<[email protected]> proto=SMTP
    helo=<62.1.xx.xxx>
    NOQUEUE: reject: RCPT from mailout2-trm.thomsonreuters.com[159.220.9.56]:
    450 4.7.1 <[email protected]>: Recipient address rejected: Service
    is unavailable; from=<[email protected]>
    to=<[email protected]> proto=ESMTP
    helo=<mailout2-trm.thomsonreuters.com>
    connect from mail-ww0-f42.google.com[74.125.82.42]
    Oct 31 14:31:55 zeus postfix/smtpd[57566]: NOQUEUE: reject: RCPT from
    mail-ww0-f42.google.com[74.125.82.42]: 450 4.7.1
    <[email protected]>: Recipient address rejected: Service is
    unavailable; from=<[email protected]>
    to=<[email protected]> proto=ESMTP
    helo=<mail-ww0-f42.google.com>
    And here is the output
    alias_maps = hash:/etc/aliases,hash:/var/mailman/data/aliases
    biff = no
    command_directory = /usr/sbin
    config_directory = /etc/postfix
    content_filter = smtp-amavis:[127.0.0.1]:10024
    daemon_directory = /usr/libexec/postfix
    debug_peer_level = 2
    enable_server_options = yes
    header_checks = pcre:/etc/postfix/custom_header_checks
    html_directory = /usr/share/doc/postfix/html
    inet_interfaces = all
    local_recipient_maps =
    mail_owner = _postfix
    mailbox_size_limit = 0
    mailbox_transport = dovecot
    mailq_path = /usr/bin/mailq
    manpage_directory = /usr/share/man
    message_size_limit = 10485760
    mydestination = $myhostname, localhost.$mydomain, localhost,
    mail.mydomain.gr, mydomain.gr, $mydomain
    mydomain = mydomain.gr
    mydomain_fallback = localhost
    myhostname = mail.mydomain.gr
    mynetworks = 127.0.0.0/8,192.168.11.0/24
    newaliases_path = /usr/bin/newaliases
    owner_request_special = no
    queue_directory = /private/var/spool/postfix
    readme_directory = /usr/share/doc/postfix
    recipient_delimiter = +
    relayhost =
    sample_directory = /usr/share/doc/postfix/examples
    sendmail_path = /usr/sbin/sendmail
    setgid_group = _postdrop
    smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated
    permit
    smtpd_enforce_tls = no
    smtpd_helo_required = yes
    smtpd_helo_restrictions = permit_mynetworks reject_invalid_helo_hostname
    reject_non_fqdn_helo_hostname
    smtpd_pw_server_security_options = cram-md5,gssapi
    smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks
    reject_unauth_destination check_policy_service unix:private/policy permit
    smtpd_sasl_auth_enable = yes
    smtpd_tls_CAfile =
    /etc/certificates/zeus.mydomain.gr.EA0190373AC43A0A914144830BB42C4F00EA8B38.chai n.pem
    smtpd_tls_cert_file =
    /etc/certificates/zeus.mydomain.gr.EA0190373AC43A0A914144830BB42C4F00EA8B38.cert .pem
    smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
    smtpd_tls_key_file =
    /etc/certificates/zeus.mydomain.gr.EA0190373AC43A0A914144830BB42C4F00EA8B38.key. pem
    smtpd_use_pw_server = yes
    smtpd_use_tls = yes
    tls_random_source = dev:/dev/urandom
    unknown_local_recipient_reject_code = 550
    virtual_alias_domains = $virtual_alias_maps hash:/etc/postfix/virtual_domains
    virtual_alias_maps = $virtual_maps hash:/etc/postfix/virtual_users
    If I'm correct port 25 is the default port with out TLS/SSL security, sorry but I didn 't understand how can I do something like this (just remove the port from SMTP??)...  Many of my clients they are not use TLS/SSL security for their emails
    Another question is : I have seen in a log files this strange thing... Many of my cliets have their own domains but when they sent message they are use google or yahoo SMTP.
    Do you believe that is a misconfiguration of the client side???
    Many Thanks/BRGDS

  • Mail server setup issues

    Hi.
    I am in trouble setting up a basic mail server. I just spent the last 10 or so hours, in one more try to set it, and yet no results.
    Please, give some help as i am becoming sort of desperated with it
    This time, i followed this guide since the beginning.
    What I've done:
    - Created a user vmail, with home directory set on /var/mail/vmail/
    - Had a LAMP server already working.
    - Created two databases: postfix_db and roundcube_db, owned by postfix_user and roundcube_user respectively.
    - Since it is for personal use and i don't use "old/odd clients like Outlook"  i skipped smtps. And made the following files:
    My postfix main.cf(every commented line removed):
    queue_directory = /var/spool/postfix
    command_directory = /usr/bin
    daemon_directory = /usr/lib/postfix
    data_directory = /var/lib/postfix
    mail_owner = postfix
    mydomain = mydomainname.tld
    unknown_local_recipient_reject_code = 550
    alias_maps = hash:/etc/postfix/aliases
    alias_database = $alias_maps
    debug_peer_level = 2
    debugger_command =
    PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
    ddd $daemon_directory/$process_name $process_id & sleep 5
    sendmail_path = /usr/bin/sendmail
    newaliases_path = /usr/bin/newaliases
    mailq_path = /usr/bin/mailq
    setgid_group = postdrop
    html_directory = no
    manpage_directory = /usr/share/man
    sample_directory = /etc/postfix/sample
    readme_directory = /usr/share/doc/postfix
    inet_protocols = ipv4
    relay_domains = *
    virtual_alias_maps = proxy:mysql:/etc/postfix/virtual_alias_maps.cf
    virtual_mailbox_domains = proxy:mysql:/etc/postfix/virtual_domains_maps.cf
    virtual_mailbox_maps = proxy:mysql:/etc/postfix/virtual_mailbox_maps.cf
    virtual_mailbox_base = /var/mail/vmail
    virtual_mailbox_limit = 512000000
    virtual_minimum_uid = 5000
    virtual_transport = virtual
    virtual_uid_maps = static:5000
    virtual_gid_maps = static:5000
    local_transport = virtual
    local_recipient_maps = $virtual_mailbox_maps
    transport_maps = hash:/etc/postfix/transport
    smtpd_sasl_auth_enable = yes
    smtpd_sasl_type = dovecot
    smtpd_sasl_path = /var/run/dovecot/auth-client
    smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination
    smtpd_relay_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination
    smtpd_sasl_security_options = noanonymous
    smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
    smtpd_tls_auth_only = yes
    smtpd_tls_cert_file = /etc/ssl/private/server.crt
    smtpd_tls_key_file = /etc/ssl/private/server.key
    smtpd_sasl_local_domain = $mydomain
    broken_sasl_auth_clients = yes
    smtpd_tls_loglevel = 1
    Postfix master.cf
    smtp inet n - n - - smtpd
    submission inet n - n - - smtpd
    -o smtpd_tls_security_level=encrypt
    -o smtpd_sasl_auth_enable=yes
    pickup unix n - n 60 1 pickup
    cleanup unix n - n - 0 cleanup
    qmgr unix n - n 300 1 qmgr
    tlsmgr unix - - n 1000? 1 tlsmgr
    rewrite unix - - n - - trivial-rewrite
    bounce unix - - n - 0 bounce
    defer unix - - n - 0 bounce
    trace unix - - n - 0 bounce
    verify unix - - n - 1 verify
    flush unix n - n 1000? 0 flush
    proxymap unix - - n - - proxymap
    proxywrite unix - - n - 1 proxymap
    smtp unix - - n - - smtp
    relay unix - - n - - smtp
    showq unix n - n - - showq
    error unix - - n - - error
    retry unix - - n - - error
    discard unix - - n - - discard
    local unix - n n - - local
    virtual unix - n n - - virtual
    lmtp unix - - n - - lmtp
    anvil unix - - n - 1 anvil
    scache unix - - n - 1 scache
    /etc/postfix/virtual_alias_maps.cf (sample password)
    user = postfix_user
    password = m/<~VN4XQ!G=jE[A/-
    hosts = localhost
    dbname = postfix_db
    query = SELECT goto FROM alias WHERE address='%s' AND active = true
    /etc/postfix/virtual_domains_maps.cf
    user = postfix_user
    password = m/<~VN4XQ!G=jE[A/-
    hosts = localhost
    dbname = postfix_db
    query = SELECT domain FROM domain WHERE domain='%s' AND backupmx = false AND active = true
    /etc/postfix/virtual_mailbox_limits.cf
    user = postfix_user
    password = m/<~VN4XQ!G=jE[A/-
    hosts = localhost
    dbname = postfix_db
    query = SELECT quota FROM mailbox WHERE username='%s'
    /etc/postfix/virtual_mailbox_maps.cf
    user = postfix_user
    password = m/<~VN4XQ!G=jE[A/-
    hosts = localhost
    dbname = postfix_db
    query = SELECT maildir FROM mailbox WHERE username='%s' AND active = true
    - Created the SSL key with no problem, and put it in place.
    Edited dovecot.conf:
    protocols = imap pop3
    auth_mechanisms = plain
    passdb {
    driver = sql
    args = /etc/dovecot/dovecot-sql.conf
    userdb sql {
    driver = sql
    args = /etc/dovecot/dovecot-sql.conf
    service auth {
    unix_listener auth-client {
    group = postfix
    mode = 0660
    user = postfix
    user = root
    mail_home = /var/mail/vmail/%d/%u
    mail_location = maildir:~
    ssl_cert = </etc/ssl/private/server.crt
    ssl_key = </etc/ssl/private/server.key
    dict {
    #quota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext
    #expire = sqlite:/etc/dovecot/dovecot-dict-sql.conf.ext
    !include conf.d/*.conf
    !include_try local.conf
    /etc/dovecot/dovecot-sql.conf
    driver = mysql
    connect = host=localhost dbname=postfix_db user=postfix_user password=m/<~VN4XQ!G=jE[A/-
    default_pass_scheme = MD5-CRYPT
    user_query = SELECT '/var/mail/vmail/%d/%u' as home, 'maildir:/var/mail/vmail/%d/%u' as mail, 5000 AS uid, 5000 AS gid, concat('dirsize:storage=', quota) AS quota FROM mailbox WHERE username = '%u' AND active = '1'
    password_query = SELECT username as user, password, '/var/mail/vmail/%d/%u' as userdb_home, 'maildir:/var/mail/vmail/%d/%u' as userdb_mail, 5000 as userdb_uid, 5000 as userdb_gid FROM mailbox WHERE username = '%u' AND active = '1'
    - Installed postfixadmin and roundcube and made their apache alias.
    - Made directories writable for them.
    /etc/webapps/postfixadmin/config.inc.php (note that there is no "?>" to end the script, it came just like that, and since it had no error there ill assume its normal)
    <?php
    $CONF['configured'] = true;
    $CONF['setup_password'] = '562bc24a874b0c2a7340e3da04b3fdf6:d60282f5cbc19340c73cafbb6526379be696a7c7';
    $CONF['postfix_admin_url'] = '[url]http://mydomain.com/postfixadmin[/url]';
    $CONF['postfix_admin_path'] = dirname(__FILE__);
    $CONF['default_language'] = 'en';
    $CONF['database_prefix'] = '';
    $CONF['database_tables'] = array (
    'admin' => 'admin',
    'alias' => 'alias',
    'alias_domain' => 'alias_domain',
    'config' => 'config',
    'domain' => 'domain',
    'domain_admins' => 'domain_admins',
    'fetchmail' => 'fetchmail',
    'log' => 'log',
    'mailbox' => 'mailbox',
    'vacation' => 'vacation',
    'vacation_notification' => 'vacation_notification',
    'quota' => 'quota',
    'quota2' => 'quota2',
    $CONF['admin_email'] = '[email protected]';
    $CONF['smtp_server'] = 'localhost';
    $CONF['smtp_port'] = '25';
    $CONF['encrypt'] = 'md5crypt';
    $CONF['authlib_default_flavor'] = 'md5raw';
    $CONF['dovecotpw'] = "/usr/sbin/dovecotpw";
    $CONF['min_password_length'] = 5;
    $CONF['generate_password'] = 'NO';
    $CONF['show_password'] = 'NO';
    $CONF['page_size'] = '10';
    $CONF['default_aliases'] = array (
    'abuse' => '[email protected]',
    'hostmaster' => '[email protected]',
    'postmaster' => '[email protected]',
    'webmaster' => '[email protected]'
    $CONF['domain_path'] = 'NO';
    $CONF['domain_in_mailbox'] = 'YES';
    $CONF['maildir_name_hook'] = 'NO';
    $CONF['aliases'] = '10';
    $CONF['mailboxes'] = '10';
    $CONF['maxquota'] = '10';
    $CONF['quota'] = 'NO';
    $CONF['quota_multiplier'] = '1024000';
    $CONF['transport'] = 'NO';
    $CONF['transport_options'] = array (
    'virtual', // for virtual accounts
    'local', // for system accounts
    'relay' // for backup mx
    $CONF['transport_default'] = 'virtual';
    $CONF['vacation'] = 'NO';
    $CONF['vacation_domain'] = 'autoreply.change-this-to-your.domain.tld';
    $CONF['vacation_control'] ='YES';
    $CONF['vacation_control_admin'] = 'YES';
    $CONF['alias_control'] = 'NO';
    $CONF['alias_control_admin'] = 'NO';
    $CONF['special_alias_control'] = 'NO';
    $CONF['alias_goto_limit'] = '0';
    $CONF['alias_domain'] = 'YES';
    $CONF['backup'] = 'YES';
    $CONF['sendmail'] = 'YES';
    $CONF['logging'] = 'YES';
    $CONF['fetchmail'] = 'YES';
    $CONF['fetchmail_extra_options'] = 'NO';
    $CONF['show_header_text'] = 'NO';
    $CONF['header_text'] = ':: Postfix Admin ::';
    $CONF['user_footer_link'] = "[url]http://mydomain.com[/url]";
    $CONF['show_footer_text'] = 'YES';
    $CONF['footer_text'] = 'Return to mydomain.com';
    $CONF['footer_link'] = '[url]http://mydomain.com[/url]';
    $CONF['welcome_text'] = <<<EOM
    Welcome to your new account.
    EOM;
    $CONF['emailcheck_resolve_domain']='YES';
    $CONF['show_status']='NO';
    $CONF['show_status_key']='NO';
    $CONF['show_status_text']='&nbsp;&nbsp;';
    $CONF['show_undeliverable']='NO';
    $CONF['show_undeliverable_color']='tomato';
    $CONF['show_undeliverable_exceptions']=array("unixmail.domain.ext","exchangeserver.domain.ext","gmail.com");
    $CONF['show_popimap']='NO';
    $CONF['show_popimap_color']='darkgrey';
    $CONF['show_custom_domains']=array("subdomain.domain.ext","domain2.ext");
    $CONF['show_custom_colors']=array("lightgreen","lightblue");
    $CONF['recipient_delimiter'] = "";
    $CONF['create_mailbox_subdirs_prefix']='INBOX.';
    $CONF['used_quotas'] = 'NO';
    $CONF['new_quota_table'] = 'NO';
    $CONF['theme_logo'] = 'images/logo-default.png';
    $CONF['theme_css'] = 'css/default.css';
    $CONF['xmlrpc_enabled'] = false;
    if (file_exists(dirname(__FILE__) . '/config.local.php')) {
    include(dirname(__FILE__) . '/config.local.php');
    $CONF['domain_path'] = 'YES';
    $CONF['domain_in_mailbox'] = 'YES';
    $CONF['database_type'] = 'mysqli';
    $CONF['database_host'] = 'localhost';
    $CONF['database_user'] = 'postfix_user';
    $CONF['database_password'] = 'm/<~VN4XQ!G=jE[A/-';
    $CONF['database_name'] = 'postfix_db';
    - I went to domain/postfixAdmin/setup.php and domain/roundcube/installer/ and everything was ok.
    db.inc.php (roundcube):
    <?php
    $rcmail_config = array();
    $rcmail_config['db_dsnw'] = 'mysql://roundcube_user:%3D%29CYbd9bK%210Z7%29AsWU@localhost/roundcube_db';
    $rcmail_config['db_dsnr'] = '';
    $rcmail_config['db_persistent'] = FALSE;
    $rcmail_config['db_table_users'] = 'users';
    $rcmail_config['db_table_identities'] = 'identities';
    $rcmail_config['db_table_contacts'] = 'contacts';
    $rcmail_config['db_table_contactgroups'] = 'contactgroups';
    $rcmail_config['db_table_contactgroupmembers'] = 'contactgroupmembers';
    $rcmail_config['db_table_session'] = 'session';
    $rcmail_config['db_table_cache'] = 'cache';
    $rcmail_config['db_table_cache_index'] = 'cache_index';
    $rcmail_config['db_table_cache_thread'] = 'cache_thread';
    $rcmail_config['db_table_cache_messages'] = 'cache_messages';
    $rcmail_config['db_table_dictionary'] = 'dictionary';
    $rcmail_config['db_table_searches'] = 'searches';
    $rcmail_config['db_table_system'] = 'system';
    $rcmail_config['db_sequence_users'] = 'user_ids';
    $rcmail_config['db_sequence_identities'] = 'identity_ids';
    $rcmail_config['db_sequence_contacts'] = 'contact_ids';
    $rcmail_config['db_sequence_contactgroups'] = 'contactgroups_ids';
    $rcmail_config['db_sequence_searches'] = 'search_ids';
    main.inc.php(roundcube):
    <?php
    $rcmail_config = array();
    $rcmail_config['debug_level'] = 5;
    $rcmail_config['log_driver'] = 'file';
    $rcmail_config['log_date_format'] = 'd-M-Y H:i:s O';
    $rcmail_config['syslog_id'] = 'roundcube';
    $rcmail_config['syslog_facility'] = LOG_USER;
    $rcmail_config['smtp_log'] = true;
    $rcmail_config['log_logins'] = false;
    $rcmail_config['log_session'] = false;
    $rcmail_config['sql_debug'] = false;
    $rcmail_config['imap_debug'] = false;
    $rcmail_config['ldap_debug'] = false;
    $rcmail_config['smtp_debug'] = false;
    $rcmail_config['default_host'] = 'tls://localhost/';
    $rcmail_config['default_port'] = 993;
    $rcmail_config['imap_auth_type'] = null;
    $rcmail_config['imap_delimiter'] = null;
    $rcmail_config['imap_ns_personal'] = null;
    $rcmail_config['imap_ns_other'] = null;
    $rcmail_config['imap_ns_shared'] = null;
    $rcmail_config['imap_force_caps'] = false;
    $rcmail_config['imap_force_lsub'] = false;
    $rcmail_config['imap_force_ns'] = false;
    $rcmail_config['imap_timeout'] = 0;
    $rcmail_config['imap_auth_cid'] = null;
    $rcmail_config['imap_auth_pw'] = null;
    $rcmail_config['imap_cache'] = null;
    $rcmail_config['messages_cache'] = false;
    $rcmail_config['smtp_server'] = 'tls://localhost/';
    $rcmail_config['smtp_port'] = 587;
    $rcmail_config['smtp_user'] = '';
    $rcmail_config['smtp_pass'] = '';
    $rcmail_config['smtp_auth_type'] = '';
    $rcmail_config['smtp_auth_cid'] = null;
    $rcmail_config['smtp_auth_pw'] = null;
    $rcmail_config['smtp_helo_host'] = '';
    $rcmail_config['smtp_timeout'] = 0;
    $rcmail_config['enable_installer'] = false;
    $rcmail_config['dont_override'] = array();
    $rcmail_config['support_url'] = '';
    $rcmail_config['skin_logo'] = 'sorrybutnocookie';
    $rcmail_config['auto_create_user'] = true;
    $rcmail_config['user_aliases'] = false;
    $rcmail_config['log_dir'] = 'logs/';
    $rcmail_config['temp_dir'] = 'temp/';
    $rcmail_config['message_cache_lifetime'] = '10d';
    $rcmail_config['force_https'] = false;
    $rcmail_config['use_https'] = false;
    $rcmail_config['login_autocomplete'] = 0;
    $rcmail_config['login_lc'] = 2;
    $rcmail_config['skin_include_php'] = false;
    $rcmail_config['display_version'] = false;
    $rcmail_config['session_lifetime'] = 10;
    $rcmail_config['session_domain'] = '';
    $rcmail_config['session_name'] = null;
    $rcmail_config['session_auth_name'] = null;
    $rcmail_config['session_path'] = null;
    $rcmail_config['session_storage'] = 'db';
    $rcmail_config['memcache_hosts'] = null;
    $rcmail_config['ip_check'] = true;
    $rcmail_config['referer_check'] = false;
    $rcmail_config['x_frame_options'] = 'sameorigin';
    $rcmail_config['des_key'] = '0JaV%FnEivx9e+JdH2g*?n3n';
    $rcmail_config['username_domain'] = '';
    $rcmail_config['mail_domain'] = '';
    $rcmail_config['password_charset'] = 'ISO-8859-1';
    $rcmail_config['sendmail_delay'] = 0;
    $rcmail_config['max_recipients'] = 0;
    $rcmail_config['max_group_members'] = 0;
    $rcmail_config['useragent'] = 'Roundcube Webmail/'.RCMAIL_VERSION;
    $rcmail_config['product_name'] = 'Test';
    $rcmail_config['include_host_config'] = false;
    $rcmail_config['generic_message_footer'] = '';
    $rcmail_config['generic_message_footer_html'] = '';
    $rcmail_config['http_received_header'] = false;
    $rcmail_config['http_received_header_encrypt'] = false;
    $rcmail_config['mail_header_delimiter'] = NULL;
    $rcmail_config['line_length'] = 72;
    $rcmail_config['send_format_flowed'] = true;
    $rcmail_config['mdn_use_from'] = false;
    $rcmail_config['identities_level'] = 0;
    $rcmail_config['client_mimetypes'] = null;
    $rcmail_config['mime_magic'] = null;
    $rcmail_config['mime_types'] = null;
    $rcmail_config['im_identify_path'] = null;
    $rcmail_config['im_convert_path'] = null;
    $rcmail_config['image_thumbnail_size'] = 240;
    $rcmail_config['contact_photo_size'] = 160;
    $rcmail_config['email_dns_check'] = false;
    $rcmail_config['no_save_sent_messages'] = false;
    $rcmail_config['plugins'] = array();
    $rcmail_config['message_sort_col'] = '';
    $rcmail_config['message_sort_order'] = 'DESC';
    $rcmail_config['list_cols'] = array('subject', 'status', 'fromto', 'date', 'size', 'flag', 'attachment');
    $rcmail_config['language'] = null;
    $rcmail_config['date_format'] = 'Y-m-d';
    $rcmail_config['date_formats'] = array('Y-m-d', 'Y/m/d', 'Y.m.d', 'd-m-Y', 'd/m/Y', 'd.m.Y', 'j.n.Y');
    $rcmail_config['time_format'] = 'H:i';
    $rcmail_config['time_formats'] = array('G:i', 'H:i', 'g:i a', 'h:i A');
    $rcmail_config['date_short'] = 'D H:i';
    $rcmail_config['date_long'] = 'Y-m-d H:i';
    $rcmail_config['drafts_mbox'] = 'Drafts';
    $rcmail_config['junk_mbox'] = 'Junk';
    $rcmail_config['sent_mbox'] = 'Sent';
    $rcmail_config['trash_mbox'] = 'Trash';
    $rcmail_config['default_folders'] = array('INBOX', 'Drafts', 'Sent', 'Junk', 'Trash');
    $rcmail_config['create_default_folders'] = false;
    $rcmail_config['protect_default_folders'] = true;
    $rcmail_config['quota_zero_as_unlimited'] = false;
    $rcmail_config['enable_spellcheck'] = false;
    $rcmail_config['spellcheck_dictionary'] = false;
    $rcmail_config['spellcheck_engine'] = 'googie';
    $rcmail_config['spellcheck_uri'] = '';
    $rcmail_config['spellcheck_languages'] = NULL;
    $rcmail_config['spellcheck_ignore_caps'] = false;
    $rcmail_config['spellcheck_ignore_nums'] = false;
    $rcmail_config['spellcheck_ignore_syms'] = false;
    $rcmail_config['recipients_separator'] = ',';
    $rcmail_config['max_pagesize'] = 200;
    $rcmail_config['min_refresh_interval'] = 60;
    $rcmail_config['upload_progress'] = false;
    $rcmail_config['undo_timeout'] = 0;
    $rcmail_config['address_book_type'] = 'sql';
    $rcmail_config['ldap_public'] = array();
    $rcmail_config['autocomplete_addressbooks'] = array('sql');
    $rcmail_config['autocomplete_min_length'] = 1;
    $rcmail_config['autocomplete_threads'] = 0;
    $rcmail_config['autocomplete_max'] = 15;
    $rcmail_config['address_template'] = '{street}<br/>{locality} {zipcode}<br/>{country} {region}';
    $rcmail_config['addressbook_search_mode'] = 0;
    $rcmail_config['default_charset'] = 'ISO-8859-1';
    $rcmail_config['skin'] = 'larry';
    $rcmail_config['mail_pagesize'] = 50;
    $rcmail_config['addressbook_pagesize'] = 50;
    $rcmail_config['addressbook_sort_col'] = 'surname';
    $rcmail_config['addressbook_name_listing'] = 0;
    $rcmail_config['timezone'] = 'auto';
    $rcmail_config['prefer_html'] = true;
    $rcmail_config['show_images'] = 0;
    $rcmail_config['message_extwin'] = false;
    $rcmail_config['compose_extwin'] = false;
    $rcmail_config['htmleditor'] = 0;
    $rcmail_config['prettydate'] = true;
    $rcmail_config['draft_autosave'] = 300;
    $rcmail_config['preview_pane'] = false;
    $rcmail_config['preview_pane_mark_read'] = 0;
    $rcmail_config['logout_purge'] = false;
    $rcmail_config['logout_expunge'] = false;
    $rcmail_config['inline_images'] = true;
    $rcmail_config['mime_param_folding'] = 0;
    $rcmail_config['skip_deleted'] = false;
    $rcmail_config['read_when_deleted'] = true;
    $rcmail_config['flag_for_deletion'] = false;
    $rcmail_config['refresh_interval'] = 60;
    $rcmail_config['check_all_folders'] = false;
    $rcmail_config['display_next'] = true;
    $rcmail_config['autoexpand_threads'] = 0;
    $rcmail_config['reply_mode'] = 0;
    $rcmail_config['strip_existing_sig'] = true;
    $rcmail_config['show_sig'] = 1;
    $rcmail_config['force_7bit'] = false;
    $rcmail_config['search_mods'] = null;
    $rcmail_config['addressbook_search_mods'] = null;
    $rcmail_config['delete_always'] = false;
    $rcmail_config['delete_junk'] = false;
    $rcmail_config['mdn_requests'] = 0;
    $rcmail_config['mdn_default'] = 0;
    $rcmail_config['dsn_default'] = 0;
    $rcmail_config['reply_same_folder'] = false;
    $rcmail_config['forward_attachment'] = false;
    $rcmail_config['default_addressbook'] = null;
    $rcmail_config['spellcheck_before_send'] = false;
    $rcmail_config['autocomplete_single'] = false;
    $rcmail_config['default_font'] = 'Verdana';
    - From what i can see, postfixadmin used and populated its database, but not roundcube.
    - I can open postfixadmin and log in with no apparent errors (not that i know what to do with it instead of roundcube, but at least works...)
    - Whenever i open roundcube it begins to output errors everywhere about db connection (I was only able after changing its .htaccess to Allow from all, is it a bad idea?)
    DB Error in /usr/share/webapps/roundcubemail/program/lib/Roundcube/rcube_db.php (416): [1146] Table 'roundcube_db.session' doesn't exist (SQL Query: SELECT vars, ip, changed FROM session WHERE sess_id = 'pq5ofv7ja0gh2sunsg38jmd3g1')
    Warning: session_start(): Cannot send session cache limiter - headers already sent in /usr/share/webapps/roundcubemail/program/lib/Roundcube/rcube.php on line 445
    DB Error: [1146] Table 'roundcube_db.session' doesn't exist
    DATABASE ERROR: CONNECTION FAILED!
    Unable to connect to the database!
    Please contact your server-administrator.
    DB Error in /usr/share/webapps/roundcubemail/program/lib/Roundcube/rcube_db.php (416): [1146] Table 'roundcube_db.session' doesn't exist (SQL Query: INSERT INTO session (sess_id, vars, ip, created, changed) VALUES ('pq5ofv7ja0gh2sunsg38jmd3g1', 'dGVtcHxiOjE7bGFuZ3VhZ2V8czo1OiJlbl9VUyI7dGFza3xzOjU6ImxvZ2luIjs=', 'xxx.xxx.xxx.xxx', '2014-02-08 07:34:46', '2014-02-08 07:34:46'))
    Thats all i know. Whats wrong? (i already tried to set db logins with no pw at all, but still with the same problems)
    How far am i to be able to send/receive one email? Please, tell me i am close...
    Mail servers could be so much more linear to set up
    Thanks for your help. Time to get some sleep!

    The roundcube db schema needs to setup manually. See /usr/share/webapps/roundcube/INSTALL
    Also, from your /etc/webapps/postfixadmin/config.inc.php:
    $CONF['domain_path'] = 'NO';
    $CONF['domain_in_mailbox'] = 'YES';
    $CONF['maildir_name_hook'] = 'NO';
    ..which results in /var/mail/vmail/[email protected]
    From your dovecot.conf
    mail_home = /var/mail/vmail/%d/%u
    ...which results in /var/mail/vmail/domain.com/user
    That doesn't fit together.

  • [SOLVED] IBM Thinkpad 600E 3.6.11-1 rt73usb weird wireless issue.

    Hi guys and gals.
    I have been researching this for 3 days now. I have also asked at the #Archlinux channel but they don't seem to know the answer and I cannot seem to find anything relevant... so here goes nothing.
    I have this Belkin rt73usb card - it's connected to this SUPER OLD Thinkpad 600E machine and it's associated always with only 1 router - static IP setup - basically laptop is stationary / not moved. I had little problems with connecting it to the network at boot time but thanks to Boohbah from #Archlinux channel and a bit of research I got it to connect http://sparewotw.wordpress.com/2013/01/ … boot-time/ and to turn off power management and to keep the rate as "fixed" - works well BUT... I have a problem with it - the connection stays up - I can browse the internet from the thinkpad / I can access the sshfs share on my server (from thinkpad) and so on but after a while sshd port - 50505 in my case - goes from open into filtered and I cannot connect to it anymore. Example - rebooted thinkpad - i can connect - thinkpad was left alone for lets say sometimes 10 minutes - sometimes an hour - connection is active but I cannot ssh to the machine anymore.
    I have been running shorewall as a firewall and I said maybe it's a shorewall bug but then I ran as root shorewall clear and it didn't solved it, disabling shorewall or restarting didn't help, restarting sshd service didn't help only restarting the wlan0 service / connection re-opens the port... Any ideas?
    All I get is "No route to host" and when I nmap the port it's not open anymore... it says filtered without firewall enabled / active...
    The connecting method has nothing to do with failures as netcfg (which started connecting at boot time after adding pci=noacpi to the boot time kernel parameters) is doing the exact same thing...
    Also when powermanagement was on and the rate was not fixed the problem was still occuring...
    Connection info is available at the link mentioned above.
    Some more technical data:
    lspci -k
    [root@wishthinkpad andrzejl]# lspci -k
    00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
    Kernel driver in use: agpgart-intel
    00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
    00:02.0 CardBus bridge: Texas Instruments PCI1251A
    Subsystem: IBM Device 00eb
    Kernel driver in use: yenta_cardbus
    00:02.1 CardBus bridge: Texas Instruments PCI1251A
    Subsystem: IBM Device 00eb
    Kernel driver in use: yenta_cardbus
    00:06.0 Multimedia audio controller: Cirrus Logic CS 4610/11 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
    Subsystem: IBM CS4610 SoundFusion Audio Accelerator
    00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
    00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
    Kernel driver in use: ata_piix
    00:07.2 USB controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
    Kernel driver in use: uhci_hcd
    00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
    01:00.0 VGA compatible controller: Neomagic Corporation NM2200 [MagicGraph 256AV] (rev 12)
    Subsystem: IBM ThinkPad 570
    [root@wishthinkpad andrzejl]#
    lscpi -vvv
    [root@wishthinkpad andrzejl]# lspci -vvv
    00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
    Latency: 64
    Region 0: Memory at 40000000 (32-bit, prefetchable) [size=64M]
    Capabilities: [a0] AGP version 1.0
    Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
    Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
    Kernel driver in use: agpgart-intel
    00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 168
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=176
    I/O behind bridge: 0000d000-0000dfff
    Memory behind bridge: 70000000-dfffffff
    Prefetchable memory behind bridge: e0000000-f7ffffff
    Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
    BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    00:02.0 CardBus bridge: Texas Instruments PCI1251A
    Subsystem: IBM Device 00eb
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 168, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 11
    Region 0: Memory at 50102000 (32-bit, non-prefetchable) [size=4K]
    Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
    Memory window 0: 1c000000-1fffffff (prefetchable)
    Memory window 1: 20000000-23ffffff
    I/O window 0: 00001000-000010ff
    I/O window 1: 00001400-000014ff
    BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
    16-bit legacy interface ports at 0001
    Kernel driver in use: yenta_cardbus
    00:02.1 CardBus bridge: Texas Instruments PCI1251A
    Subsystem: IBM Device 00eb
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 168, Cache Line Size: 64 bytes
    Interrupt: pin B routed to IRQ 11
    Region 0: Memory at 50101000 (32-bit, non-prefetchable) [size=4K]
    Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
    Memory window 0: 24000000-27ffffff (prefetchable)
    Memory window 1: 28000000-2bffffff
    I/O window 0: 00001800-000018ff
    I/O window 1: 00001c00-00001cff
    BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
    16-bit legacy interface ports at 0001
    Kernel driver in use: yenta_cardbus
    00:06.0 Multimedia audio controller: Cirrus Logic CS 4610/11 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
    Subsystem: IBM CS4610 SoundFusion Audio Accelerator
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 32 (1000ns min, 6000ns max)
    Interrupt: pin A routed to IRQ 9
    Region 0: Memory at 50100000 (32-bit, non-prefetchable) [size=4K]
    Region 1: Memory at 50000000 (32-bit, non-prefetchable) [size=1M]
    00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
    Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 48
    Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
    Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
    Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
    Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
    Region 4: I/O ports at fcf0 [size=16]
    Kernel driver in use: ata_piix
    00:07.2 USB controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 48
    Interrupt: pin D routed to IRQ 11
    Region 4: I/O ports at 8400 [size=32]
    Kernel driver in use: uhci_hcd
    00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
    Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin ? routed to IRQ 9
    01:00.0 VGA compatible controller: Neomagic Corporation NM2200 [MagicGraph 256AV] (rev 12) (prog-if 00 [VGA controller])
    Subsystem: IBM ThinkPad 570
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 128 (4000ns min, 63750ns max)
    Interrupt: pin A routed to IRQ 11
    Region 0: Memory at e0000000 (32-bit, prefetchable) [size=16M]
    Region 1: Memory at 70000000 (32-bit, non-prefetchable) [size=4M]
    Region 2: Memory at 70400000 (32-bit, non-prefetchable) [size=1M]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: [dc] Power Management version 1
    Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    [root@wishthinkpad andrzejl]#
    inxi -v7
    [root@wishthinkpad andrzejl]# inxi -v7
    System: Host: wishthinkpad.loc Kernel: 3.6.11-1-ARCH i686 (32 bit, gcc: 4.7.2)
    Desktop: N/A info: lxpanel dm: lxdm Distro: Arch Linux
    Machine: Mobo: IBM model: 26458A0 serial: J197K75421N Bios: IBM version: INET24WW date: 05/24/1999
    CPU: Single core Mobile Pentium II (-UP-) cache: 256 KB flags: (-) bmips: 728.23 clocked at 363.955 MHz
    Graphics: Card: Neomagic NM2200 [MagicGraph 256AV] bus-ID: 01:00.0 chip-ID: 10c8:0005
    X.org: 1.13.1 driver: neomagic tty size: 116x32 Advanced Data: N/A for root
    Audio: Card: Cirrus Logic CS 4610/11 [CrystalClear SoundFusion Audio Accelerator]
    driver: CS4239 bus-ID: 00:06.0 chip-ID: 1013:6001
    Sound: Advanced Linux Sound Architecture ver: 1.0.25
    Network: Card: Ralink RT2501/RT2573 Wireless Adapter driver: rt73usb ver: 2.3.0 usb-ID: 001-003 chip-ID: 148f:2573
    IF: wlan0 state: up mac: 00:0e:2e:f4:db:4c
    WAN IP: None Detected! IF: wlan0 ip: 192.168.0.102 ip-v6: N/A
    Drives: HDD Total Size: 40.0GB (84.5% used)
    1: id: /dev/sda model: TOSHIBA_MK4032GA size: 40.0GB serial: 66SJ8501S
    Optical: /dev/sr0 model: N/A rev: N/A dev-links: cdrom
    Features: speed: 24x multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw state: N/A
    Partition: ID: / size: 9.4G used: 6.9G (77%) fs: ext4 dev: /dev/sda1
    label: N/A uuid: 350fa8e9-36fb-4927-abaf-91f4b958a679
    ID: /media/Extra size: 26G used: 24G (99%) fs: ext4 dev: /dev/sda7
    label: Data uuid: e4eb21d7-8ea8-4059-b44b-778690e44675
    ID: /home size: 1004M used: 834M (88%) fs: ext4 dev: /dev/sda6
    label: N/A uuid: 567947ca-cba3-42e4-9677-e9ddeecd2c26
    ID: swap-1 size: 1.02GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
    label: N/A uuid: 0a64bde1-82c3-4cfb-ab68-7178564d8ed5
    RAID: No RAID data available - /proc/mdstat is missing - is md_mod kernel module loaded?
    Unmounted: ID: /dev/sr0 size: 1.07G label: N/A uuid: N/A
    Sensors: System Temperatures: cpu: 60.8C mobo: 24.8C
    Fan Speeds (in rpm): cpu: N/A
    Info: Processes: 85 Uptime: 5 min Memory: 65.5/404.5MB Runlevel: 5 Gcc sys: 4.7.2
    Client: Shell (bash 4.2.42) inxi: 1.8.26
    [root@wishthinkpad andrzejl]#
    lsmod
    [root@wishthinkpad andrzejl]# lsmod
    Module Size Used by
    fuse 60479 4
    ablk_helper 1529 0
    cryptd 7390 1 ablk_helper
    aes_i586 6980 1
    aes_generic 26055 1 aes_i586
    arc4 1604 2
    rt73usb 22629 0
    rt2x00usb 7823 1 rt73usb
    rt2x00lib 32012 2 rt73usb,rt2x00usb
    mac80211 367308 2 rt2x00lib,rt2x00usb
    cfg80211 153457 2 mac80211,rt2x00lib
    rfkill 12569 2 cfg80211
    ppdev 4751 0
    crc_itu_t 1096 1 rt73usb
    joydev 7696 0
    ac 1893 0
    battery 5691 0
    microcode 8922 0
    irda 91023 0
    parport_pc 26474 0
    parport 26032 2 ppdev,parport_pc
    ns558 1832 0
    video 9964 0
    crc_ccitt 1096 1 irda
    gameport 6265 2 ns558
    pcmcia 31186 0
    fan 1999 0
    thermal 6660 0
    intel_agp 8593 1
    psmouse 71891 0
    shpchp 22302 0
    intel_gtt 12212 1 intel_agp
    i2c_piix4 7288 0
    yenta_socket 18841 0
    processor 24040 1
    pci_hotplug 20151 1 shpchp
    agpgart 21936 2 intel_agp,intel_gtt
    pcmcia_rsrc 8809 1 yenta_socket
    serio_raw 3714 0
    button 3711 0
    i2c_core 16944 1 i2c_piix4
    evdev 7663 8
    pcmcia_core 10242 3 pcmcia,pcmcia_rsrc,yenta_socket
    ext4 402657 3
    crc16 1092 1 ext4
    jbd2 66384 1 ext4
    mbcache 4387 1 ext4
    hid_generic 710 0
    usbhid 32211 0
    hid 68226 2 hid_generic,usbhid
    sr_mod 13149 0
    cdrom 30345 1 sr_mod
    sd_mod 27312 5
    ata_generic 2435 0
    pata_acpi 2400 0
    ata_piix 19705 4
    libata 146129 3 pata_acpi,ata_generic,ata_piix
    uhci_hcd 19841 0
    usbcore 126796 4 uhci_hcd,rt73usb,rt2x00usb,usbhid
    scsi_mod 113073 3 libata,sd_mod,sr_mod
    usb_common 623 1 usbcore
    floppy 48487 0
    snd_cs4236 22145 0
    snd_mpu401_uart 4944 1 snd_cs4236
    snd_rawmidi 14983 1 snd_mpu401_uart
    snd_opl3_lib 7187 1 snd_cs4236
    snd_hwdep 4843 1 snd_opl3_lib
    snd_seq_device 4285 2 snd_rawmidi,snd_opl3_lib
    snd_wss_lib 18180 1 snd_cs4236
    snd_pcm 61958 2 snd_wss_lib,snd_cs4236
    snd_page_alloc 5902 2 snd_wss_lib,snd_pcm
    snd_timer 14903 3 snd_wss_lib,snd_pcm,snd_opl3_lib
    snd 45098 9 snd_hwdep,snd_timer,snd_wss_lib,snd_pcm,snd_rawmidi,snd_mpu401_uart,snd_seq_device,snd_cs4236,snd_opl3_lib
    soundcore 4379 1 snd
    [root@wishthinkpad andrzejl]#
    lsusb -v
    [root@wishthinkpad andrzejl]# lsusb -v
    Bus 001 Device 002: ID 058f:9254 Alcor Micro Corp. Hub
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 1.10
    bDeviceClass 9 Hub
    bDeviceSubClass 0 Unused
    bDeviceProtocol 0 Full speed (or root) hub
    bMaxPacketSize0 8
    idVendor 0x058f Alcor Micro Corp.
    idProduct 0x9254 Hub
    bcdDevice 3.12
    iManufacturer 1 ALCOR
    iProduct 2 Generic USB Hub
    iSerial 0
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
    Self Powered
    Remote Wakeup
    MaxPower 100mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 9 Hub
    bInterfaceSubClass 0 Unused
    bInterfaceProtocol 0 Full speed (or root) hub
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0001 1x 1 bytes
    bInterval 255
    Hub Descriptor:
    bLength 9
    bDescriptorType 41
    nNbrPorts 4
    wHubCharacteristic 0x0009
    Per-port power switching
    Per-port overcurrent protection
    bPwrOn2PwrGood 22 * 2 milli seconds
    bHubContrCurrent 100 milli Ampere
    DeviceRemovable 0x00
    PortPwrCtrlMask 0xff
    Hub Port Status:
    Port 1: 0000.0103 power enable connect
    Port 2: 0000.0303 lowspeed power enable connect
    Port 3: 0000.0100 power
    Port 4: 0000.0100 power
    Device Status: 0x0001
    Self Powered
    Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 1.10
    bDeviceClass 9 Hub
    bDeviceSubClass 0 Unused
    bDeviceProtocol 0 Full speed (or root) hub
    bMaxPacketSize0 64
    idVendor 0x1d6b Linux Foundation
    idProduct 0x0001 1.1 root hub
    bcdDevice 3.06
    iManufacturer 3 Linux 3.6.11-1-ARCH uhci_hcd
    iProduct 2 UHCI Host Controller
    iSerial 1 0000:00:07.2
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
    Self Powered
    Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 9 Hub
    bInterfaceSubClass 0 Unused
    bInterfaceProtocol 0 Full speed (or root) hub
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0002 1x 2 bytes
    bInterval 255
    Hub Descriptor:
    bLength 9
    bDescriptorType 41
    nNbrPorts 2
    wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
    bPwrOn2PwrGood 1 * 2 milli seconds
    bHubContrCurrent 0 milli Ampere
    DeviceRemovable 0x00
    PortPwrCtrlMask 0xff
    Hub Port Status:
    Port 1: 0000.0103 power enable connect
    Port 2: 0000.0100 power
    Device Status: 0x0001
    Self Powered
    Bus 001 Device 003: ID 148f:2573 Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 2.00
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 64
    idVendor 0x148f Ralink Technology, Corp.
    idProduct 0x2573 RT2501/RT2573 Wireless Adapter
    bcdDevice 0.01
    iManufacturer 1 Ralink
    iProduct 2 802.11 bg WLAN
    iSerial 0
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 32
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0x80
    (Bus Powered)
    MaxPower 300mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 2
    bInterfaceClass 255 Vendor Specific Class
    bInterfaceSubClass 255 Vendor Specific Subclass
    bInterfaceProtocol 255 Vendor Specific Protocol
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0040 1x 64 bytes
    bInterval 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x01 EP 1 OUT
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0040 1x 64 bytes
    bInterval 0
    Device Qualifier (for other device speed):
    bLength 10
    bDescriptorType 6
    bcdUSB 2.00
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 64
    bNumConfigurations 1
    Device Status: 0x0000
    (Bus Powered)
    Bus 001 Device 004: ID 04fc:0538 Sunplus Technology Co., Ltd Wireless Optical Mouse 2.4G [Bright]
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 1.10
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 8
    idVendor 0x04fc Sunplus Technology Co., Ltd
    idProduct 0x0538 Wireless Optical Mouse 2.4G [Bright]
    bcdDevice 1.10
    iManufacturer 1 MLK
    iProduct 2 Silvercrest OM1008
    iSerial 0
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 34
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 4 HID RF Receiver
    bmAttributes 0xa0
    (Bus Powered)
    Remote Wakeup
    MaxPower 100mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 3 Human Interface Device
    bInterfaceSubClass 1 Boot Interface Subclass
    bInterfaceProtocol 2 Mouse
    iInterface 5 EP1 Interrupt
    HID Device Descriptor:
    bLength 9
    bDescriptorType 33
    bcdHID 1.10
    bCountryCode 0 Not supported
    bNumDescriptors 1
    bDescriptorType 34 Report
    wDescriptorLength 114
    Report Descriptors:
    ** UNAVAILABLE **
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0008 1x 8 bytes
    bInterval 10
    Device Status: 0x0000
    (Bus Powered)
    [root@wishthinkpad andrzejl]#
    iwconfig
    [root@wishthinkpad andrzejl]# iwconfig
    wlan0 IEEE 802.11bg ESSID:"Arch_Linux_User"
    Mode:Managed Frequency:2.412 GHz Access Point: 00:18:39:A0:DB:3E
    Bit Rate=54 Mb/s Tx-Power=20 dBm
    Retry long limit:7 RTS thr:off Fragment thr:off
    Encryption key:off
    Power Management:off
    Link Quality=64/70 Signal level=-46 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:0 Invalid misc:5 Missed beacon:0
    lo no wireless extensions.
    [root@wishthinkpad andrzejl]#
    ifconfig
    [root@wishthinkpad andrzejl]# ifconfig
    lo: flags=73<UP,LOOPBACK,RUNNING> mtu 16436
    inet 127.0.0.1 netmask 255.0.0.0
    loop txqueuelen 0 (Local Loopback)
    RX packets 526 bytes 275160 (268.7 KiB)
    RX errors 0 dropped 0 overruns 0 frame 0
    TX packets 526 bytes 275160 (268.7 KiB)
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
    wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
    inet 192.168.0.102 netmask 255.255.255.0 broadcast 192.168.0.255
    ether 00:0e:2e:f4:db:4c txqueuelen 1000 (Ethernet)
    RX packets 1590 bytes 381744 (372.7 KiB)
    RX errors 0 dropped 0 overruns 0 frame 0
    TX packets 1238 bytes 194926 (190.3 KiB)
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
    [root@wishthinkpad andrzejl]#
    dmesg right after reboot when it works
    [root@wishthinkpad andrzejl]# dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.6.11-1-ARCH (tobias@testing) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Tue Dec 18 12:58:46 CET 2012
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000019fcffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000019fd0000-0x0000000019fdefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x0000000019fdf000-0x0000000019fdffff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x0000000019fe0000-0x0000000019ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fffe0000-0x00000000ffffffff] reserved
    [ 0.000000] Malformed early option 'apic'
    [ 0.000000] Malformed early option 'apic'
    [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
    [ 0.000000] DMI 2.2 present.
    [ 0.000000] DMI: IBM 26458A0/26458A0, BIOS INET24WW 05/24/1999
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] e820: last_pfn = 0x19fd0 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CBFFF write-protect
    [ 0.000000] CC000-EFFFF uncachable
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask FF0000000 write-back
    [ 0.000000] 1 base 010000000 mask FF8000000 write-back
    [ 0.000000] 2 base 018000000 mask FFE000000 write-back
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] PAT not supported by CPU.
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
    [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x19fcffff]
    [ 0.000000] [mem 0x00000000-0x003fffff] page 4k
    [ 0.000000] [mem 0x00400000-0x19bfffff] page 2M
    [ 0.000000] [mem 0x19c00000-0x19fcffff] page 4k
    [ 0.000000] kernel direct mapping tables up to 0x19fcffff @ [mem 0x01bfa000-0x01bfffff]
    [ 0.000000] RAMDISK: [mem 0x18c36000-0x18f14fff]
    [ 0.000000] IBM Thinkpad 600 Series 2645 detected: force use of acpi=noirq
    [ 0.000000] ACPI: RSDP 000fd6e0 00014 (v00 IBM )
    [ 0.000000] ACPI: RSDT 19fd0000 00028 (v01 IBM TP600R 00000001 00000000)
    [ 0.000000] ACPI: FACP 19fd0100 00074 (v01 IBM TP600R 00000001 00000000)
    [ 0.000000] ACPI: DSDT 19fd0200 0B501 (v01 IBM TP600R 0000001D MSFT 0100000B)
    [ 0.000000] ACPI: FACS 19fdf000 00040
    [ 0.000000] 0MB HIGHMEM available.
    [ 0.000000] 415MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 19fd0000
    [ 0.000000] low ram: 0 - 19fd0000
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] Normal [mem 0x01000000-0x19fcffff]
    [ 0.000000] HighMem empty
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0x19fcffff]
    [ 0.000000] On node 0 totalpages: 106335
    [ 0.000000] free_area_init_node: node 0, pgdat c155acc0, node_mem_map d9c8f200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
    [ 0.000000] Normal zone: 800 pages used for memmap
    [ 0.000000] Normal zone: 101552 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0xef08
    [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
    [ 0.000000] Local APIC disabled by BIOS -- reenabling.
    [ 0.000000] Could not enable APIC!
    [ 0.000000] APIC: disable apic facility
    [ 0.000000] APIC: switched to apic NOOP
    [ 0.000000] nr_irqs_gsi: 16
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] e820: [mem 0x1a000000-0xfffdffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 13 pages/cpu @d9c7e000 s32384 r0 d20864 u53248
    [ 0.000000] pcpu-alloc: s32384 r0 d20864 u53248 alloc=13*4096
    [ 0.000000] pcpu-alloc: [0] 0
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 105503
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=350fa8e9-36fb-4927-abaf-91f4b958a679 ro quiet pci=noacpi lapic apic acpi=noirq apm=on pci=use_crs
    [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
    [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 851456 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
    [ 0.000000] Memory: 410744k/425792k available (3974k kernel code, 14596k reserved, 1545k data, 536k init, 0k highmem)
    [ 0.000000] virtual kernel memory layout:
    fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xda7d0000 - 0xff7fe000 ( 592 MB)
    lowmem : 0xc0000000 - 0xd9fd0000 ( 415 MB)
    .init : 0xc1564000 - 0xc15ea000 ( 536 kB)
    .data : 0xc13e18b2 - 0xc1563fc0 (1545 kB)
    .text : 0xc1000000 - 0xc13e18b2 (3974 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
    [ 0.000000] NR_IRQS:2304 nr_irqs:256 16
    [ 0.000000] CPU 0 irqstacks, hard=d9408000 soft=d940a000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 363.955 MHz processor
    [ 0.006677] Calibrating delay loop (skipped), value calculated using timer frequency.. 728.23 BogoMIPS (lpj=1213183)
    [ 0.006704] pid_max: default: 32768 minimum: 301
    [ 0.006934] Security Framework initialized
    [ 0.006969] AppArmor: AppArmor disabled by boot time parameter
    [ 0.007122] Mount-cache hash table entries: 512
    [ 0.008703] Initializing cgroup subsys cpuacct
    [ 0.008725] Initializing cgroup subsys memory
    [ 0.008789] Initializing cgroup subsys devices
    [ 0.008805] Initializing cgroup subsys freezer
    [ 0.008820] Initializing cgroup subsys net_cls
    [ 0.008833] Initializing cgroup subsys blkio
    [ 0.010131] mce: CPU supports 5 MCE banks
    [ 0.010255] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
    Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
    tlb_flushall_shift is 0x6
    [ 0.010345] SMP alternatives: switching to UP code
    [ 0.030215] Freeing SMP alternatives: 16k freed
    [ 0.030302] ACPI: Core revision 20120711
    [ 0.064159] ACPI: setting ELCR to 0a00 (from 0800)
    [ 0.066739] ftrace: allocating 17427 entries in 35 pages
    [ 0.110222] smpboot: weird, boot CPU (#0) not listed by the BIOS
    [ 0.110255] smpboot: SMP motherboard not detected
    [ 0.110269] smpboot: Local APIC not detected. Using dummy APIC emulation.
    [ 0.110278] smpboot: SMP disabled
    [ 0.110291] Performance Events:
    [ 0.110308] no APIC, boot with the "lapic" boot parameter to force-enable it.
    [ 0.110319] no hardware sampling interrupt available.
    [ 0.110332] p6 PMU driver.
    [ 0.110348] ... version: 0
    [ 0.110358] ... bit width: 32
    [ 0.110367] ... generic registers: 2
    [ 0.110378] ... value mask: 00000000ffffffff
    [ 0.110389] ... max period: 000000007fffffff
    [ 0.110398] ... fixed-purpose events: 0
    [ 0.110408] ... event mask: 0000000000000003
    [ 0.137539] NMI watchdog: disabled (cpu0): not supported (no LAPIC?)
    [ 0.137923] Brought up 1 CPUs
    [ 0.137943] smpboot: Total of 1 processors activated (728.23 BogoMIPS)
    [ 0.139405] devtmpfs: initialized
    [ 0.141359] PM: Registering ACPI NVS region [mem 0x19fdf000-0x19fdffff] (4096 bytes)
    [ 0.152637] NET: Registered protocol family 16
    [ 0.154302] ACPI: bus type pci registered
    [ 0.159739] PCI: PCI BIOS revision 2.10 entry at 0xfd880, last bus=7
    [ 0.159754] PCI: Using configuration type 1 for base access
    [ 0.164680] bio: create slab <bio-0> at 0
    [ 0.165221] ACPI: Added _OSI(Module Device)
    [ 0.165239] ACPI: Added _OSI(Processor Device)
    [ 0.165254] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.165270] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.174743] ACPI: EC: Look up EC in DSDT
    [ 0.561367] ACPI: Interpreter enabled
    [ 0.561420] ACPI: (supports S0 S1 S2 S3 S4 S5)
    [ 0.561831] ACPI: Using PIC for interrupt routing
    [ 0.570305] ACPI: Power Resource [PVID] (on)
    [ 0.572694] ACPI: Power Resource [PSIO] (on)
    [ 0.574878] ACPI: Power Resource [PRSD] (off)
    [ 0.629330] ACPI: Power Resource [PFN0] (off)
    [ 0.630906] ACPI: Power Resource [PFN1] (off)
    [ 0.636194] ACPI: Power Resource [PDCK] (on)
    [ 0.637240] ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
    [ 0.641373] ACPI: ACPI Dock Station Driver: 1 docks/bays found
    [ 0.641842] vgaarb: loaded
    [ 0.642190] PCI: Probing PCI hardware
    [ 0.642209] PCI: root bus 00: using default resources
    [ 0.642221] PCI: Probing PCI hardware (bus 00)
    [ 0.642464] PCI host bridge to bus 0000:00
    [ 0.642497] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    [ 0.642519] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
    [ 0.642539] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
    [ 0.642568] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
    [ 0.642638] pci 0000:00:00.0: [8086:7190] type 00 class 0x060000
    [ 0.642688] pci 0000:00:00.0: reg 10: [mem 0x40000000-0x43ffffff pref]
    [ 0.642858] pci 0000:00:01.0: [8086:7191] type 01 class 0x060400
    [ 0.642983] pci 0000:00:02.0: [104c:ac1d] type 02 class 0x060700
    [ 0.643038] pci 0000:00:02.0: reg 10: [mem 0x50102000-0x50102fff]
    [ 0.643117] pci 0000:00:02.0: supports D1 D2
    [ 0.643137] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot
    [ 0.643214] pci 0000:00:02.1: [104c:ac1d] type 02 class 0x060700
    [ 0.643333] pci 0000:00:02.1: reg 10: [mem 0x50101000-0x50101fff]
    [ 0.643414] pci 0000:00:02.1: supports D1 D2
    [ 0.643434] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot
    [ 0.643527] pci 0000:00:06.0: [1013:6001] type 00 class 0x040100
    [ 0.643575] pci 0000:00:06.0: reg 10: [mem 0x50100000-0x50100fff]
    [ 0.643613] pci 0000:00:06.0: reg 14: [mem 0x50000000-0x500fffff]
    [ 0.643780] pci 0000:00:07.0: [8086:7110] type 00 class 0x068000
    [ 0.643978] pci 0000:00:07.1: [8086:7111] type 00 class 0x010180
    [ 0.644084] pci 0000:00:07.1: reg 20: [io 0xfcf0-0xfcff]
    [ 0.644199] pci 0000:00:07.2: [8086:7112] type 00 class 0x0c0300
    [ 0.644308] pci 0000:00:07.2: reg 20: [io 0x8400-0x841f]
    [ 0.644422] pci 0000:00:07.3: [8086:7113] type 00 class 0x068000
    [ 0.644441] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
    * this clock source is slow. Consider trying other clock sources
    [ 0.644601] pci 0000:00:07.3: quirk: [io 0xef00-0xef3f] claimed by PIIX4 ACPI
    [ 0.644626] pci 0000:00:07.3: quirk: [io 0xefa0-0xefaf] claimed by PIIX4 SMB
    [ 0.644652] pci 0000:00:07.3: PIIX4 devres B PIO at 02f8-02ff
    [ 0.644674] pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
    [ 0.644696] pci 0000:00:07.3: PIIX4 devres E PIO at 0538-053f
    [ 0.644720] pci 0000:00:07.3: PIIX4 devres G PIO at 0130-013f
    [ 0.644744] pci 0000:00:07.3: PIIX4 devres I PIO at 002e-002f
    [ 0.644898] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-ff]
    [ 0.644954] pci 0000:01:00.0: [10c8:0005] type 00 class 0x030000
    [ 0.645006] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xe0ffffff pref]
    [ 0.645042] pci 0000:01:00.0: reg 14: [mem 0x70000000-0x703fffff]
    [ 0.645077] pci 0000:01:00.0: reg 18: [mem 0x70400000-0x704fffff]
    [ 0.645196] pci 0000:01:00.0: supports D1 D2
    [ 0.645293] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.645319] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 0.645344] pci 0000:00:01.0: bridge window [mem 0x70000000-0xdfffffff]
    [ 0.645369] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf7ffffff pref]
    [ 0.645481] pci_bus 0000:02: busn_res: [bus 02-ff] is inserted under [bus 00-ff]
    [ 0.645511] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 05
    [ 0.645597] pci_bus 0000:06: busn_res: [bus 06-ff] is inserted under [bus 00-ff]
    [ 0.645625] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 09
    [ 0.645655] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 09
    [ 0.647922] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.648802] pci 0000:00:07.0: PIIX/ICH IRQ router [8086:7110]
    [ 0.648892] PCI: pci_cache_line_size set to 32 bytes
    [ 0.649047] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
    [ 0.649064] e820: reserve RAM buffer [mem 0x19fd0000-0x1bffffff]
    [ 0.649911] NetLabel: Initializing
    [ 0.649928] NetLabel: domain hash size = 128
    [ 0.649990] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.650100] NetLabel: unlabeled traffic allowed by default
    [ 0.650468] Switching to clocksource pit
    [ 0.711237] pnp: PnP ACPI init
    [ 0.711384] ACPI: bus type pnp registered
    [ 0.713292] pnp 00:00: [mem 0x00000000-0x0009ffff]
    [ 0.713318] pnp 00:00: [mem 0x000c0000-0x000cbfff]
    [ 0.713339] pnp 00:00: [mem 0x000f0000-0x000fffff]
    [ 0.713359] pnp 00:00: [mem 0x00100000-0x19ffffff]
    [ 0.713379] pnp 00:00: [mem 0xfffe0000-0xffffffff]
    [ 0.713727] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.713755] system 00:00: [mem 0x000c0000-0x000cbfff] could not be reserved
    [ 0.713779] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
    [ 0.713802] system 00:00: [mem 0x00100000-0x19ffffff] could not be reserved
    [ 0.713827] system 00:00: [mem 0xfffe0000-0xffffffff] has been reserved
    [ 0.713864] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.713985] pnp 00:01: [bus 00-ff]
    [ 0.714037] pnp 00:01: [io 0x0cf8-0x0cff]
    [ 0.714060] pnp 00:01: [io 0x0000-0x0cf7 window]
    [ 0.714081] pnp 00:01: [io 0x0d00-0xffff window]
    [ 0.714103] pnp 00:01: [mem 0x000a0000-0x000bffff window]
    [ 0.714124] pnp 00:01: [mem 0x000cc000-0x000effff window]
    [ 0.714145] pnp 00:01: [mem 0x1a000000-0xffdfffff window]
    [ 0.714436] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.714937] pnp 00:02: [io 0x03f0-0x03f5]
    [ 0.714959] pnp 00:02: [io 0x03f7]
    [ 0.714986] pnp 00:02: [irq 6]
    [ 0.715008] pnp 00:02: [dma 2]
    [ 0.715317] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
    [ 0.715952] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (disabled)
    [ 0.716936] pnp 00:04: [io 0x03bc-0x03bf]
    [ 0.716964] pnp 00:04: [irq 7]
    [ 0.717518] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
    [ 0.718750] pnp 00:05: [io 0x03f8-0x03ff]
    [ 0.718775] pnp 00:05: [irq 4]
    [ 0.718795] pnp 00:05: [dma 3]
    [ 0.719828] pnp 00:05: Plug and Play ACPI device, IDs IBM0071 PNP0511 (active)
    [ 0.724699] pnp 00:06: [io 0x0538-0x053f]
    [ 0.725031] pnp 00:06: Plug and Play ACPI device, IDs CSC0110 (active)
    [ 0.733111] pnp 00:07: [io 0x0530-0x0537]
    [ 0.733135] pnp 00:07: [io 0x0388-0x038b]
    [ 0.733155] pnp 00:07: [io 0x0220-0x0233]
    [ 0.733179] pnp 00:07: [irq 5]
    [ 0.733198] pnp 00:07: [dma 1]
    [ 0.733216] pnp 00:07: [dma 0]
    [ 0.733642] pnp 00:07: Plug and Play ACPI device, IDs CSC0100 (active)
    [ 0.735954] pnp 00:08: [io 0x0200-0x0207]
    [ 0.736302] pnp 00:08: Plug and Play ACPI device, IDs CSC0101 PNPb02f (active)
    [ 0.741151] pnp 00:09: Plug and Play ACPI device, IDs CSC0103 (disabled)
    [ 0.749141] pnp 00:0a: [io 0x0130-0x013f]
    [ 0.749165] pnp 00:0a: [io 0x02f8-0x02ff]
    [ 0.749189] pnp 00:0a: [irq 3]
    [ 0.749209] pnp 00:0a: [irq 10]
    [ 0.749228] pnp 00:0a: [dma 7]
    [ 0.752374] pnp 00:0a: Plug and Play ACPI device, IDs IBM3765 (active)
    [ 0.752895] pnp 00:0b: [io 0x0000-0x000f]
    [ 0.752917] pnp 00:0b: [io 0x0080-0x008f]
    [ 0.752937] pnp 00:0b: [io 0x00c0-0x00df]
    [ 0.752956] pnp 00:0b: [dma 4]
    [ 0.753206] pnp 00:0b: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.753287] pnp 00:0c: [io 0x0061]
    [ 0.753520] pnp 00:0c: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.753616] pnp 00:0d: [io 0x0022]
    [ 0.753638] pnp 00:0d: [io 0x0092]
    [ 0.753657] pnp 00:0d: [io 0x00b2]
    [ 0.753676] pnp 00:0d: [io 0x002e-0x002f]
    [ 0.753695] pnp 00:0d: [io 0x15e0-0x15ef]
    [ 0.753714] pnp 00:0d: [io 0xef00-0xef3f]
    [ 0.753733] pnp 00:0d: [io 0xefa0-0xefaf]
    [ 0.754086] system 00:0d: [io 0x15e0-0x15ef] has been reserved
    [ 0.754112] system 00:0d: [io 0xef00-0xef3f] has been reserved
    [ 0.754135] system 00:0d: [io 0xefa0-0xefaf] has been reserved
    [ 0.754168] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.754256] pnp 00:0e: [io 0x00f0-0x00ff]
    [ 0.754281] pnp 00:0e: [irq 13]
    [ 0.754519] pnp 00:0e: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.754608] pnp 00:0f: [io 0x0060]
    [ 0.754629] pnp 00:0f: [io 0x0064]
    [ 0.754650] pnp 00:0f: [irq 1]
    [ 0.754887] pnp 00:0f: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.754973] pnp 00:10: [irq 12]
    [ 0.755233] pnp 00:10: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active)
    [ 0.755324] pnp 00:11: [io 0x0070-0x0073]
    [ 0.755347] pnp 00:11: [irq 8]
    [ 0.755587] pnp 00:11: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.761409] pnp: PnP ACPI: found 18 devices
    [ 0.761429] ACPI: ACPI bus type pnp unregistered
    [ 0.812245] Switching to clocksource acpi_pm
    [ 0.812534] pci 0000:00:02.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
    [ 0.812561] pci 0000:00:02.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
    [ 0.812586] pci 0000:00:02.1: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
    [ 0.812610] pci 0000:00:02.1: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
    [ 0.812633] pci 0000:00:02.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    [ 0.812655] pci 0000:00:02.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    [ 0.812760] pci 0000:00:02.1: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    [ 0.812785] pci 0000:00:02.1: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    [ 0.812829] pci 0000:00:02.0: BAR 15: assigned [mem 0x1c000000-0x1fffffff pref]
    [ 0.812855] pci 0000:00:02.0: BAR 16: assigned [mem 0x20000000-0x23ffffff]
    [ 0.812882] pci 0000:00:02.1: BAR 15: assigned [mem 0x24000000-0x27ffffff pref]
    [ 0.812907] pci 0000:00:02.1: BAR 16: assigned [mem 0x28000000-0x2bffffff]
    [ 0.812937] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x10ff]
    [ 0.812963] pci 0000:00:02.0: BAR 14: assigned [io 0x1400-0x14ff]
    [ 0.812990] pci 0000:00:02.1: BAR 13: assigned [io 0x1800-0x18ff]
    [ 0.813016] pci 0000:00:02.1: BAR 14: assigned [io 0x1c00-0x1cff]
    [ 0.813047] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.813073] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 0.813101] pci 0000:00:01.0: bridge window [mem 0x70000000-0xdfffffff]
    [ 0.813126] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf7ffffff pref]
    [ 0.813154] pci 0000:00:02.0: CardBus bridge to [bus 02-05]
    [ 0.813174] pci 0000:00:02.0: bridge window [io 0x1000-0x10ff]
    [ 0.813199] pci 0000:00:02.0: bridge window [io 0x1400-0x14ff]
    [ 0.813224] pci 0000:00:02.0: bridge window [mem 0x1c000000-0x1fffffff pref]
    [ 0.813249] pci 0000:00:02.0: bridge window [mem 0x20000000-0x23ffffff]
    [ 0.813273] pci 0000:00:02.1: CardBus bridge to [bus 06-09]
    [ 0.813293] pci 0000:00:02.1: bridge window [io 0x1800-0x18ff]
    [ 0.813316] pci 0000:00:02.1: bridge window [io 0x1c00-0x1cff]
    [ 0.813341] pci 0000:00:02.1: bridge window [mem 0x24000000-0x27ffffff pref]
    [ 0.813416] pci 0000:00:02.1: bridge window [mem 0x28000000-0x2bffffff]
    [ 0.813478] PCI: setting IRQ 11 as level-triggered
    [ 0.813500] pci 0000:00:02.0: found PCI INT A -> IRQ 11
    [ 0.813572] pci 0000:00:02.0: sharing IRQ 11 with 0000:01:00.0
    [ 0.813615] pci 0000:00:02.1: found PCI INT B -> IRQ 11
    [ 0.813694] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
    [ 0.813717] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
    [ 0.813739] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
    [ 0.813760] pci_bus 0000:01: resource 1 [mem 0x70000000-0xdfffffff]
    [ 0.813782] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf7ffffff pref]
    [ 0.813804] pci_bus 0000:02: resource 0 [io 0x1000-0x10ff]
    [ 0.813825] pci_bus 0000:02: resource 1 [io 0x1400-0x14ff]
    [ 0.813846] pci_bus 0000:02: resource 2 [mem 0x1c000000-0x1fffffff pref]
    [ 0.813867] pci_bus 0000:02: resource 3 [mem 0x20000000-0x23ffffff]
    [ 0.813889] pci_bus 0000:06: resource 0 [io 0x1800-0x18ff]
    [ 0.813909] pci_bus 0000:06: resource 1 [io 0x1c00-0x1cff]
    [ 0.813931] pci_bus 0000:06: resource 2 [mem 0x24000000-0x27ffffff pref]
    [ 0.813952] pci_bus 0000:06: resource 3 [mem 0x28000000-0x2bffffff]
    [ 0.814282] NET: Registered protocol family 2
    [ 0.815362] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.816017] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.816894] TCP: Hash tables configured (established 16384 bind 16384)
    [ 0.817202] TCP: reno registered
    [ 0.817236] UDP hash table entries: 256 (order: 1, 8192 bytes)
    [ 0.817312] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    [ 0.817996] NET: Registered protocol family 1
    [ 0.818107] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
    [ 0.818266] pci 0000:00:07.2: found PCI INT D -> IRQ 11
    [ 0.818392] pci 0000:01:00.0: Boot video device
    [ 0.818413] PCI: CLS 32 bytes, default 32
    [ 0.818831] Unpacking initramfs...
    [ 1.351292] Freeing initrd memory: 2940k freed
    [ 1.376909] IBM machine detected. Enabling interrupts during APM calls.
    [ 1.376944] apm: BIOS not found.
    [ 1.378768] audit: initializing netlink socket (disabled)
    [ 1.378869] type=2000 audit(1357623100.375:1): initialized
    [ 1.456306] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 1.469632] VFS: Disk quotas dquot_6.5.2
    [ 1.470155] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 1.471349] msgmni has been set to 808
    [ 1.472909] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 1.473145] io scheduler noop registered
    [ 1.473160] io scheduler deadline registered
    [ 1.473241] io scheduler cfq registered (default)
    [ 1.474456] vesafb: mode is 1024x768x24, linelength=3072, pages=0
    [ 1.474471] vesafb: scrolling: redraw
    [ 1.474491] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [ 1.475741] vesafb: framebuffer at 0xe0000000, mapped to 0xda800000, using 2304k, total 2304k
    [ 1.562964] Console: switching to colour frame buffer device 128x48
    [ 1.649186] fb0: VESA VGA frame buffer device
    [ 1.649300] intel_idle: does not run on family 6 model 6
    [ 1.649488] GHES: HEST is not enabled!
    [ 1.649596] isapnp: Scanning for PnP cards...
    [ 1.962801] isapnp: No Plug & Play device found
    [ 1.963142] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.963546] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
    [ 1.965105] serial 00:03: [io 0x03e8-0x03ef]
    [ 1.965270] serial 00:03: [io 0x02e8-0x02ef]
    [ 1.965370] serial 00:03: unable to assign resources
    [ 1.966235] serial: probe of 00:03 failed with error -16
    [ 1.968618] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:MOU0] at 0x60,0x64 irq 1,12
    [ 1.981778] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.982038] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.982810] mousedev: PS/2 mouse device common for all mice
    [ 1.983547] rtc_cmos 00:11: RTC can wake from S4
    [ 1.984178] rtc_cmos 00:11: rtc core: registered rtc_cmos as rtc0
    [ 1.984245] rtc0: alarms up to one month, y3k, 242 bytes nvram
    [ 1.984391] cpuidle: using governor ladder
    [ 1.984407] cpuidle: using governor menu
    [ 1.985466] drop_monitor: Initializing network drop monitor service
    [ 1.986281] TCP: cubic registered
    [ 1.987523] NET: Registered protocol family 10
    [ 1.988965] NET: Registered protocol family 17
    [ 1.989071] Key type dns_resolver registered
    [ 1.989929] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.991439] Using IPI No-Shortcut mode
    [ 1.992165] PM: Hibernation image not present or could not be loaded.
    [ 1.992247] registered taskstats version 1
    [ 1.993234] rtc_cmos 00:11: setting system clock to 2013-01-08 05:31:41 UTC (1357623101)
    [ 1.994003] Freeing unused kernel memory: 536k freed
    [ 1.998614] Write protecting the kernel text: 3976k
    [ 1.998781] Write protecting the kernel read-only data: 1180k
    [ 2.076151] systemd-udevd[35]: starting version 196
    [ 2.376812] tsc: Refined TSC clocksource calibration: 363.959 MHz
    [ 2.376856] Switching to clocksource tsc
    [ 2.660180] Floppy drive(s): fd0 is 1.44M
    [ 2.675627] FDC 0 is a National Semiconductor PC87306
    [ 2.846218] SCSI subsystem initialized
    [ 2.846867] ACPI: bus type usb registered
    [ 2.847139] usbcore: registered new interface driver usbfs
    [ 2.847247] usbcore: registered new interface driver hub
    [ 2.850735] usbcore: registered new device driver usb
    [ 2.865842] uhci_hcd: USB Universal Host Controller Interface driver
    [ 2.866073] uhci_hcd 0000:00:07.2: found PCI INT D -> IRQ 11
    [ 2.866196] uhci_hcd 0000:00:07.2: UHCI Host Controller
    [ 2.866262] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
    [ 2.866376] uhci_hcd 0000:00:07.2: irq 11, io base 0x00008400
    [ 2.870937] hub 1-0:1.0: USB hub found
    [ 2.870987] hub 1-0:1.0: 2 ports detected
    [ 2.916340] ACPI: bus type scsi registered
    [ 2.925593] libata version 3.00 loaded.
    [ 2.928785] ata_piix 0000:00:07.1: version 2.13
    [ 2.951632] scsi0 : ata_piix
    [ 2.957437] scsi1 : ata_piix
    [ 2.957913] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xfcf0 irq 14
    [ 2.957935] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xfcf8 irq 15
    [ 3.114144] ata2.00: ATAPI: QSI CD-RW/DVD-ROM SBW-242, UD22, max UDMA/33
    [ 3.117407] ata1.00: ATA-6: TOSHIBA MK4032GAX, AD101A, max UDMA/100
    [ 3.117435] ata1.00: 78140160 sectors, multi 16: LBA48
    [ 3.120653] ata2.00: configured for UDMA/33
    [ 3.124030] ata1.00: configured for UDMA/33
    [ 3.124974] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK4032GA AD10 PQ: 0 ANSI: 5
    [ 3.127443] scsi 1:0:0:0: CD-ROM QSI CDRW/DVD SBW-242 UD22 PQ: 0 ANSI: 5
    [ 3.176936] usb 1-1: new full-speed USB device number 2 using uhci_hcd
    [ 3.243716] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
    [ 3.244277] sd 0:0:0:0: [sda] Write Protect is off
    [ 3.244302] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 3.244530] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.252164] sr0: scsi3-mmc drive: 4x/24x writer cd/rw xa/form2 cdda tray
    [ 3.252195] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 3.255158] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 3.316885] sda: sda1 sda2 < sda5 sda6 sda7 >
    [ 3.322292] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.340964] hub 1-1:1.0: USB hub found
    [ 3.342614] hub 1-1:1.0: 4 ports detected
    [ 3.621587] usb 1-1.1: new full-speed USB device number 3 using uhci_hcd
    [ 3.948499] usb 1-1.2: new low-speed USB device number 4 using uhci_hcd
    [ 4.158834] usbcore: registered new interface driver usbhid
    [ 4.158859] usbhid: USB HID core driver
    [ 4.184432] input: MLK Silvercrest OM1008 as /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1.2/1-1.2:1.0/input/input1
    [ 4.192909] hid-generic 0003:04FC:0538.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [MLK Silvercrest OM1008] on usb-0000:00:07.2-1.2/input0
    [ 4.408087] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 5.387222] systemd[1]: systemd 196 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
    [ 5.436187] systemd[1]: Set hostname to <wishthinkpad.loc>.
    [ 6.018181] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 6.018714] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 6.018876] systemd[1]: Starting Syslog Socket.
    [ 6.019287] systemd[1]: Listening on Syslog Socket.
    [ 6.019417] systemd[1]: Starting Remote File Systems.
    [ 6.019547] systemd[1]: Reached target Remote File Systems.
    [ 6.019670] systemd[1]: Expecting device sys-subsystem-net-devices-wlan0.device...
    [ 6.019805] systemd[1]: Starting Delayed Shutdown Socket.
    [ 6.020214] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 6.020346] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 6.020607] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 6.020725] systemd[1]: Starting Encrypted Volumes.
    [ 6.020855] systemd[1]: Reached target Encrypted Volumes.
    [ 6.021185] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 6.022274] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 6.022458] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 6.022858] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 6.023723] systemd[1]: Starting udev Kernel Socket.
    [ 6.024020] systemd[1]: Listening on udev Kernel Socket.
    [ 6.024588] systemd[1]: Starting udev Control Socket.
    [ 6.024899] systemd[1]: Listening on udev Control Socket.
    [ 6.025066] systemd[1]: Expecting device dev-disk-by\x2duuid-0a64bde1\x2d82c3\x2d4cfb\x2dab68\x2d7178564d8ed5.device...
    [ 6.025218] systemd[1]: Expecting device dev-disk-by\x2duuid-567947ca\x2dcba3\x2d42e4\x2d9677\x2de9ddeecd2c26.device...
    [ 6.025358] systemd[1]: Expecting device dev-disk-by\x2duuid-e4eb21d7\x2d8ea8\x2d4059\x2db44b\x2d778690e44675.device...
    [ 6.025517] systemd[1]: Starting Journal Socket.
    [ 6.025993] systemd[1]: Listening on Journal Socket.
    [ 6.026212] systemd[1]: Started File System Check on Root Device.
    [ 6.026347] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 6.034598] systemd[1]: Starting Setup Virtual Console...
    [ 6.044014] systemd[1]: Mounting POSIX Message Queue File System...
    [ 6.055201] systemd[1]: Mounting Debug File System...
    [ 6.098496] systemd[1]: Started Set Up Additional Binary Formats.
    [ 6.098949] systemd[1]: Mounting Huge Pages File System...
    [ 6.106869] systemd[1]: Starting udev Kernel Device Manager...
    [ 6.142067] systemd[1]: Starting Apply Kernel Variables...
    [ 6.167655] systemd[1]: Started Load Kernel Modules.
    [ 6.167933] systemd[1]: Mounted FUSE Control File System.
    [ 6.168090] systemd[1]: Mounted Configuration File System.
    [ 6.168674] systemd[1]: Starting udev Coldplug all Devices...
    [ 6.178256] systemd[1]: Starting Journal Service...
    [ 6.254916] systemd[1]: Started Journal Service.
    [ 6.255257] systemd[1]: Starting Syslog.
    [ 6.255396] systemd[1]: Reached target Syslog.
    [ 6.459181] systemd-udevd[82]: starting version 196
    [ 6.601745] EXT4-fs (sda1): re-mounted. Opts: (null)
    [ 8.687281] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
    [ 8.693686] ACPI: Lid Switch [LID0]
    [ 8.694288] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    [ 8.703735] ACPI: Sleep Button [SLPB]
    [ 8.708032] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 8.710936] ACPI: Power Button [PWRF]
    [ 8.742946] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 8.759509] Linux agpgart interface v0.103
    [ 8.761831] tsc: Marking TSC unstable due to TSC halts in idle
    [ 8.766111] Switching to clocksource acpi_pm
    [ 8.777943] ACPI: acpi_idle registered with cpuidle
    [ 8.790560] piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
    [ 8.792526] piix4_smbus: probe of 0000:00:07.3 failed with error -1
    [ 8.810432] yenta_cardbus 0000:00:02.0: CardBus bridge found [1014:00eb]
    [ 8.810495] yenta_cardbus 0000:00:02.0: Enabling burst memory read transactions
    [ 8.810520] yenta_cardbus 0000:00:02.0: Using CSCINT to route CSC interrupts to PCI
    [ 8.810537] yenta_cardbus 0000:00:02.0: Routing CardBus interrupts to PCI
    [ 8.810562] yenta_cardbus 0000:00:02.0: TI: mfunc 0xfba97543, devctl 0x62
    [ 8.938642] thermal LNXTHERM:00: registered as thermal_zone0
    [ 8.938670] ACPI: Thermal Zone [THM0] (42 C)
    [ 9.004501] ACPI: Fan [FN00] (off)
    [ 9.005012] ACPI: Fan [FN01] (off)
    [ 9.009048] thermal LNXTHERM:01: registered as thermal_zone1
    [ 9.009073] ACPI: Thermal Zone [THM2] (20 C)
    [ 9.009590] ACPI: Fan [FN20] (off)
    [ 9.012203] ACPI: Fan [FN21] (off)
    [ 9.013314] ACPI: Fan [FN60] (off)
    [ 9.014648] ACPI: Fan [FN61] (off)
    [ 9.040764] yenta_cardbus 0000:00:02.0: ISA IRQ mask 0x0498, PCI irq 11
    [ 9.040796] yenta_cardbus 0000:00:02.0: Socket status: 30000006
    [ 9.062521] yenta_cardbus 0000:00:02.1: CardBus bridge found [1014:00eb]
    [ 9.062591] yenta_cardbus 0000:00:02.1: Using CSCINT to route CSC interrupts to PCI
    [ 9.062610] yenta_cardbus 0000:00:02.1: Routing CardBus interrupts to PCI
    [ 9.062634] yenta_cardbus 0000:00:02.1: TI: mfunc 0xfba97543, devctl 0x62
    [ 9.079663] ACPI: Fan [FN70] (off)
    [ 9.093343] thermal LNXTHERM:02: registered as thermal_zone2
    [ 9.095023] ACPI: Thermal Zone [THM6] (27 C)
    [ 9.096320] ACPI: Fan [FN71] (off)
    [ 9.102380] thermal LNXTHERM:03: registered as thermal_zone3
    [ 9.102406] ACPI: Thermal Zone [THM7] (27 C)
    [ 9.290735] yenta_cardbus 0000:00:02.1: ISA IRQ mask 0x0498, PCI irq 11
    [ 9.290767] yenta_cardbus 0000:00:02.1: Socket status: 30000006
    [ 9.298222] psmouse serio1: hgpk: ID: 10 00 64
    [ 9.319131] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 9.321961] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
    [ 9.383513] gameport gameport0: NS558 PnP Gameport is pnp00:08/gameport0, io 0x200, speed 685kHz
    [ 9.449433] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0x40000000
    [ 9.572098] parport_pc 00:04: reported by Plug and Play ACPI
    [ 9.572186] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
    [ 9.621417] NET: Registered protocol family 23
    [ 9.702875] nsc-ircc, chip->init
    [ 9.702902] nsc-ircc, Found chip at base=0x02e
    [ 9.702942] nsc-ircc, driver loaded (Dag Brattli)
    [ 9.703038] nsc_ircc_open(), can't get iobase of 0x3f8
    [ 9.703089] nsc-ircc, Found chip at base=0x02e
    [ 9.703128] nsc-ircc, driver loaded (Dag Brattli)
    [ 9.703173] nsc_ircc_open(), can't get iobase of 0x3f8
    [ 9.710755] nsc-ircc 00:05: disabled
    [ 9.829100] microcode: CPU0 sig=0x66a, pf=0x8, revision=0xa
    [ 9.840431] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0b, buttons: 3/3
    [ 9.871890] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5
    [ 10.413153] ppdev: user-space parallel port driver
    [ 10.512439] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 10.681703] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
    [ 10.682361] excluding 0x130-0x137 0x170-0x177 0x1f0-0x1f7 0x200-0x207 0x220-0x22f 0x370-0x377 0x388-0x38f
    [ 10.683119] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
    [ 10.687638] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af:
    [ 10.688295] excluding 0x130-0x137 0x170-0x177 0x1f0-0x1f7 0x200-0x207 0x220-0x22f 0x370-0x377 0x388-0x38f
    [ 10.689052] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff:
    [ 10.689327] excluding 0x3f0-0x3ff 0x4c0-0x4c7 0x4d0-0x4d7
    [ 10.689737] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff:
    [ 10.693574] excluding 0x3f0-0x3ff 0x4d0-0x4d7
    [ 10.694068] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
    [ 10.694336] excluding 0x850-0x857
    [ 10.694666] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
    [ 10.695138] clean.
    [ 10.695329] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
    [ 10.695361] excluding 0xc0000-0xcbfff 0xf0000-0xfffff
    [ 10.695577] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
    [ 10.695647] excluding 0xa0000000-0xa0ffffff
    [ 10.695820] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
    [ 10.695902] clean.
    [ 10.696062] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
    [ 10.696552] clean.
    [ 10.699553] clean.
    [ 10.703678] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7:
    [ 10.704168] clean.
    [ 10.704390] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff:
    [ 10.704423] excluding 0xc0000-0xcbfff 0xf0000-0xfffff
    [ 10.704641] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff:
    [ 10.704711] excluding 0xa0000000-0xa0ffffff
    [ 10.704884] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff:
    [ 10.704966] clean.
    [ 10.705127] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff:
    [ 10.705615] clean.
    [ 11.538531] Adding

    Hi Dude.
    I will try what You have suggested.
    Which channel do You "recommend"?
    My router is set to G-only as the card is G-only, I have been using channel 1 but I will change it to 11 and see what happens.
    I was using WPA2-Personal with AES but I will change it to WPA2-Mixed (AES + TKIP) and see if that changes anything.
    I was hoping that the upgrade of the linux-firmware (linux-firmware-20130610-1) that I have found in the repo today fixes the issue.
    Installed it and typed in:
    [root@wishthinkpad andrzejl]# iwconfig wlan0 rate 54M fixed
    [root@wishthinkpad andrzejl]# ping go
    and I have lost connection before I could even type in "ping google.com"...
    Edit: Changing router's settings got me nowhere so far Dude:
    [andrzejl@wishmacer ~]$ ssh_ibm
    Last login: Fri Jun 14 16:08:17 2013 from acer.loc
    [andrzejl@wishthinkpad ~]$ su
    Password:
    [root@wishthinkpad andrzejl]# ping google.com
    PING google.com (74.125.24.102) 56(84) bytes of data.
    64 bytes from de-in-f102.1e100.net (74.125.24.102): icmp_seq=1 ttl=47 time=81.5 ms
    64 bytes from de-in-f102.1e100.net (74.125.24.102): icmp_seq=2 ttl=47 time=79.9 ms
    64 bytes from de-in-f102.1e100.net (74.125.24.102): icmp_seq=3 ttl=47 time=85.4 ms
    64 bytes from de-in-f102.1e100.net (74.125.24.102): icmp_seq=4 ttl=47 time=81.6 ms
    64 bytes from de-in-f102.1e100.net (74.125.24.102): icmp_seq=5 ttl=47 time=81.7 ms
    64 bytes from de-in-f102.1e100.net (74.125.24.102): icmp_seq=6 ttl=47 time=94.1 ms
    64 bytes from de-in-f102.1e100.net (74.125.24.102): icmp_seq=7 ttl=47 time=77.0 ms
    ^C
    --- google.com ping statistics ---
    7 packets transmitted, 7 received, 0% packet loss, time 6002ms
    rtt min/avg/max/mdev = 77.097/83.085/94.145/5.084 ms
    [root@wishthinkpad andrzejl]# iwconfig
    wlan0     IEEE 802.11bg  ESSID:"Arch_Linux_User" 
              Mode:Managed  Frequency:2.462 GHz  Access Point: 00:18:39:A0:DB:3E   
              Bit Rate=1 Mb/s   Tx-Power=20 dBm   
              Retry  long limit:7   RTS thr:off   Fragment thr:off
              Encryption key:off
              Power Management:off
              Link Quality=60/70  Signal level=-50 dBm 
              Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
              Tx excessive retries:0  Invalid misc:132   Missed beacon:0
    lo        no wireless extensions.
    [root@wishthinkpad andrzejl]# iwconfig wlan0 rate 54M fixed
    [root@wishthinkpad andrzejl]# ping google.com
    PING google.com (74.125.24.101) 56(84) bytes of data.
    64 bytes from de-in-f101.1e100.net (74.125.24.101): icmp_seq=4 ttl=47 time=34.1 ms
    64 bytes from de-in-f101.1e100.net (74.125.24.101): icmp_seq=8 ttl=47 time=70.3 ms
    64 bytes from de-in-f101.1e100.net (74.125.24.101): icmp_seq=9 ttl=47 time=163 ms
    ^C64 bytes from 74.125.24.101: icmp_seq=13 ttl=47 time=39.7 ms
    --- google.com ping statistics ---
    13 packets transmitted, 4 received, 69% packet loss, time 30364ms
    rtt min/avg/max/mdev = 34.139/76.870/163.269/51.752 ms
    [root@wishthinkpad andrzejl]#
    Here is the log (journalctl -b | grep wlan > dump_wlan) for the entire boot:
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Expecting device sys-subsystem-net-devices-wlan0.device...
    Jun 14 16:13:14 wishthinkpad.loc ntpd[201]: Listen normally on 3 wlan0 192.168.0.102 UDP 123
    Jun 14 16:13:19 wishthinkpad.loc kernel: IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    Jun 14 16:13:19 wishthinkpad.loc kernel: wlan0: authenticate with 00:18:39:a0:db:3e
    Jun 14 16:13:19 wishthinkpad.loc kernel: wlan0: send auth to 00:18:39:a0:db:3e (try 1/3)
    Jun 14 16:13:19 wishthinkpad.loc kernel: wlan0: authenticated
    Jun 14 16:13:19 wishthinkpad.loc kernel: rt73usb 1-1.1:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
    Jun 14 16:13:19 wishthinkpad.loc kernel: rt73usb 1-1.1:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
    Jun 14 16:13:19 wishthinkpad.loc kernel: wlan0: associate with 00:18:39:a0:db:3e (try 1/3)
    Jun 14 16:13:19 wishthinkpad.loc kernel: wlan0: RX AssocResp from 00:18:39:a0:db:3e (capab=0x411 status=0 aid=1)
    Jun 14 16:13:19 wishthinkpad.loc kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    Jun 14 16:13:19 wishthinkpad.loc kernel: wlan0: associated
    Here is the log (journalctl -b > dump) for the entire boot:
    -- Logs begin at Sat 2013-01-05 05:42:53 GMT, end at Fri 2013-06-14 16:23:56 IST. --
    Jun 14 16:13:03 wishthinkpad.loc systemd-journal[90]: Allowing runtime journal files to grow to 20.2M.
    Jun 14 16:13:03 wishthinkpad.loc kernel: Initializing cgroup subsys cpuset
    Jun 14 16:13:03 wishthinkpad.loc kernel: Initializing cgroup subsys cpu
    Jun 14 16:13:03 wishthinkpad.loc kernel: Linux version 3.9.5-1-ARCH (tobias@testing-i686) (gcc version 4.8.1 (GCC) ) #1 SMP PREEMPT Sat Jun 8 10:10:57 CEST 2013
    Jun 14 16:13:03 wishthinkpad.loc kernel: e820: BIOS-provided physical RAM map:
    Jun 14 16:13:03 wishthinkpad.loc kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
    Jun 14 16:13:03 wishthinkpad.loc kernel: BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
    Jun 14 16:13:03 wishthinkpad.loc kernel: BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
    Jun 14 16:13:03 wishthinkpad.loc kernel: BIOS-e820: [mem 0x0000000000100000-0x0000000019fcffff] usable
    Jun 14 16:13:03 wishthinkpad.loc kernel: BIOS-e820: [mem 0x0000000019fd0000-0x0000000019fdefff] ACPI data
    Jun 14 16:13:03 wishthinkpad.loc kernel: BIOS-e820: [mem 0x0000000019fdf000-0x0000000019fdffff] ACPI NVS
    Jun 14 16:13:03 wishthinkpad.loc kernel: BIOS-e820: [mem 0x0000000019fe0000-0x0000000019ffffff] reserved
    Jun 14 16:13:03 wishthinkpad.loc kernel: BIOS-e820: [mem 0x00000000fffe0000-0x00000000ffffffff] reserved
    Jun 14 16:13:03 wishthinkpad.loc kernel: Malformed early option 'apic'
    Jun 14 16:13:03 wishthinkpad.loc kernel: Malformed early option 'apic'
    Jun 14 16:13:03 wishthinkpad.loc kernel: Notice: NX (Execute Disable) protection missing in CPU!
    Jun 14 16:13:03 wishthinkpad.loc kernel: SMBIOS 2.2 present.
    Jun 14 16:13:03 wishthinkpad.loc kernel: DMI: IBM 26458A0/26458A0, BIOS INET24WW 05/24/1999
    Jun 14 16:13:03 wishthinkpad.loc kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    Jun 14 16:13:03 wishthinkpad.loc kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
    Jun 14 16:13:03 wishthinkpad.loc kernel: e820: last_pfn = 0x19fd0 max_arch_pfn = 0x100000
    Jun 14 16:13:03 wishthinkpad.loc kernel: MTRR default type: uncachable
    Jun 14 16:13:03 wishthinkpad.loc kernel: MTRR fixed ranges enabled:
    Jun 14 16:13:03 wishthinkpad.loc kernel: 00000-9FFFF write-back
    Jun 14 16:13:03 wishthinkpad.loc kernel: A0000-BFFFF uncachable
    Jun 14 16:13:03 wishthinkpad.loc kernel: C0000-CBFFF write-protect
    Jun 14 16:13:03 wishthinkpad.loc kernel: CC000-EFFFF uncachable
    Jun 14 16:13:03 wishthinkpad.loc kernel: F0000-FFFFF write-protect
    Jun 14 16:13:03 wishthinkpad.loc kernel: MTRR variable ranges enabled:
    Jun 14 16:13:03 wishthinkpad.loc kernel: 0 base 000000000 mask FF0000000 write-back
    Jun 14 16:13:03 wishthinkpad.loc kernel: 1 base 010000000 mask FF8000000 write-back
    Jun 14 16:13:03 wishthinkpad.loc kernel: 2 base 018000000 mask FFE000000 write-back
    Jun 14 16:13:03 wishthinkpad.loc kernel: 3 disabled
    Jun 14 16:13:03 wishthinkpad.loc kernel: 4 disabled
    Jun 14 16:13:03 wishthinkpad.loc kernel: 5 disabled
    Jun 14 16:13:03 wishthinkpad.loc kernel: 6 disabled
    Jun 14 16:13:03 wishthinkpad.loc kernel: 7 disabled
    Jun 14 16:13:03 wishthinkpad.loc kernel: PAT not supported by CPU.
    Jun 14 16:13:03 wishthinkpad.loc kernel: Scanning 1 areas for low memory corruption
    Jun 14 16:13:03 wishthinkpad.loc kernel: initial memory mapped: [mem 0x00000000-0x01bfffff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: Base memory trampoline at [c009b000] 9b000 size 16384
    Jun 14 16:13:03 wishthinkpad.loc kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: [mem 0x00000000-0x000fffff] page 4k
    Jun 14 16:13:03 wishthinkpad.loc kernel: init_memory_mapping: [mem 0x19800000-0x19bfffff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: [mem 0x19800000-0x19bfffff] page 2M
    Jun 14 16:13:03 wishthinkpad.loc kernel: init_memory_mapping: [mem 0x18000000-0x197fffff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: [mem 0x18000000-0x197fffff] page 2M
    Jun 14 16:13:03 wishthinkpad.loc kernel: init_memory_mapping: [mem 0x00100000-0x17ffffff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: [mem 0x00100000-0x003fffff] page 4k
    Jun 14 16:13:03 wishthinkpad.loc kernel: [mem 0x00400000-0x17ffffff] page 2M
    Jun 14 16:13:03 wishthinkpad.loc kernel: init_memory_mapping: [mem 0x19c00000-0x19fcffff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: [mem 0x19c00000-0x19fcffff] page 4k
    Jun 14 16:13:03 wishthinkpad.loc kernel: BRK [0x01742000, 0x01742fff] PGTABLE
    Jun 14 16:13:03 wishthinkpad.loc kernel: RAMDISK: [mem 0x18af1000-0x18eddfff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: IBM Thinkpad 600 Series 2645 detected: force use of acpi=noirq
    Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: RSDP 000fd6e0 00014 (v00 IBM )
    Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: RSDT 19fd0000 00028 (v01 IBM TP600R 00000001 00000000)
    Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: FACP 19fd0100 00074 (v01 IBM TP600R 00000001 00000000)
    Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: DSDT 19fd0200 0B501 (v01 IBM TP600R 0000001D MSFT 0100000B)
    Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: FACS 19fdf000 00040
    Jun 14 16:13:03 wishthinkpad.loc kernel: 0MB HIGHMEM available.
    Jun 14 16:13:03 wishthinkpad.loc kernel: 415MB LOWMEM available.
    Jun 14 16:13:03 wishthinkpad.loc kernel: mapped low ram: 0 - 19fd0000
    Jun 14 16:13:03 wishthinkpad.loc kernel: low ram: 0 - 19fd0000
    Jun 14 16:13:03 wishthinkpad.loc kernel: BRK [0x01743000, 0x01743fff] PGTABLE
    Jun 14 16:13:03 wishthinkpad.loc kernel: Zone ranges:
    Jun 14 16:13:03 wishthinkpad.loc kernel: DMA [mem 0x00001000-0x00ffffff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: Normal [mem 0x01000000-0x19fcffff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: HighMem empty
    Jun 14 16:13:03 wishthinkpad.loc kernel: Movable zone start for each node
    Jun 14 16:13:03 wishthinkpad.loc kernel: Early memory node ranges
    Jun 14 16:13:03 wishthinkpad.loc kernel: node 0: [mem 0x00001000-0x0009efff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: node 0: [mem 0x00100000-0x19fcffff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: On node 0 totalpages: 106350
    Jun 14 16:13:03 wishthinkpad.loc kernel: free_area_init_node: node 0, pgdat c15aeb00, node_mem_map d9c90020
    Jun 14 16:13:03 wishthinkpad.loc kernel: DMA zone: 32 pages used for memmap
    Jun 14 16:13:03 wishthinkpad.loc kernel: DMA zone: 0 pages reserved
    Jun 14 16:13:03 wishthinkpad.loc kernel: DMA zone: 3998 pages, LIFO batch:0
    Jun 14 16:13:03 wishthinkpad.loc kernel: Normal zone: 800 pages used for memmap
    Jun 14 16:13:03 wishthinkpad.loc kernel: Normal zone: 102352 pages, LIFO batch:31
    Jun 14 16:13:03 wishthinkpad.loc kernel: Using APIC driver default
    Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: PM-Timer IO Port: 0xef08
    Jun 14 16:13:03 wishthinkpad.loc kernel: smpboot: Allowing 1 CPUs, 0 hotplug CPUs
    Jun 14 16:13:03 wishthinkpad.loc kernel: Local APIC disabled by BIOS -- reenabling.
    Jun 14 16:13:03 wishthinkpad.loc kernel: Could not enable APIC!
    Jun 14 16:13:03 wishthinkpad.loc kernel: APIC: disable apic facility
    Jun 14 16:13:03 wishthinkpad.loc kernel: APIC: switched to apic NOOP
    Jun 14 16:13:03 wishthinkpad.loc kernel: nr_irqs_gsi: 16
    Jun 14 16:13:03 wishthinkpad.loc kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    Jun 14 16:13:03 wishthinkpad.loc kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    Jun 14 16:13:03 wishthinkpad.loc kernel: PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    Jun 14 16:13:03 wishthinkpad.loc kernel: e820: [mem 0x1a000000-0xfffdffff] available for PCI devices
    Jun 14 16:13:03 wishthinkpad.loc kernel: Booting paravirtualized kernel on bare hardware
    Jun 14 16:13:03 wishthinkpad.loc kernel: setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
    Jun 14 16:13:03 wishthinkpad.loc kernel: PERCPU: Embedded 14 pages/cpu @d9c7e000 s33280 r0 d24064 u57344
    Jun 14 16:13:03 wishthinkpad.loc kernel: pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096
    Jun 14 16:13:03 wishthinkpad.loc kernel: pcpu-alloc: [0] 0
    Jun 14 16:13:03 wishthinkpad.loc kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 105518
    Jun 14 16:13:03 wishthinkpad.loc kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=350fa8e9-36fb-4927-abaf-91f4b958a679 ro quiet pci=noacpi lapic apic acpi=noirq apm=on pci=use_crs
    Jun 14 16:13:03 wishthinkpad.loc kernel: PID hash table entries: 2048 (order: 1, 8192 bytes)
    Jun 14 16:13:03 wishthinkpad.loc kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Jun 14 16:13:03 wishthinkpad.loc kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Jun 14 16:13:03 wishthinkpad.loc kernel: __ex_table already sorted, skipping sort
    Jun 14 16:13:03 wishthinkpad.loc kernel: Initializing CPU#0
    Jun 14 16:13:03 wishthinkpad.loc kernel: allocated 851576 bytes of page_cgroup
    Jun 14 16:13:03 wishthinkpad.loc kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Jun 14 16:13:03 wishthinkpad.loc kernel: Initializing HighMem for node 0 (00000000:00000000)
    Jun 14 16:13:03 wishthinkpad.loc kernel: Memory: 409236k/425792k available (4177k kernel code, 16164k reserved, 1706k data, 572k init, 0k highmem)
    Jun 14 16:13:03 wishthinkpad.loc kernel: [379B blob data]
    Jun 14 16:13:03 wishthinkpad.loc kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
    Jun 14 16:13:03 wishthinkpad.loc kernel: SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Jun 14 16:13:03 wishthinkpad.loc kernel: Preemptible hierarchical RCU implementation.
    Jun 14 16:13:03 wishthinkpad.loc kernel: RCU dyntick-idle grace-period acceleration is enabled.
    Jun 14 16:13:03 wishthinkpad.loc kernel: Dump stacks of tasks blocking RCU-preempt GP.
    Jun 14 16:13:03 wishthinkpad.loc kernel: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
    Jun 14 16:13:03 wishthinkpad.loc kernel: NR_IRQS:2304 nr_irqs:256 16
    Jun 14 16:13:03 wishthinkpad.loc kernel: CPU 0 irqstacks, hard=d9406000 soft=d9408000
    Jun 14 16:13:03 wishthinkpad.loc kernel: Console: colour dummy device 80x25
    Jun 14 16:13:03 wishthinkpad.loc kernel: console [tty0] enabled
    Jun 14 16:13:03 wishthinkpad.loc kernel: tsc: Fast TSC calibration using PIT
    Jun 14 16:13:03 wishthinkpad.loc kernel: tsc: Detected 363.989 MHz processor
    Jun 14 16:13:03 wishthinkpad.loc kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 728.31 BogoMIPS (lpj=1213296)
    Jun 14 16:13:03 wishthinkpad.loc kernel: pid_max: default: 32768 minimum: 301
    Jun 14 16:13:03 wishthinkpad.loc kernel: Security Framework initialized
    Jun 14 16:13:03 wishthinkpad.loc kernel: AppArmor: AppArmor disabled by boot time parameter
    Jun 14 16:13:03 wishthinkpad.loc kernel: Mount-cache hash table entries: 512
    Jun 14 16:13:03 wishthinkpad.loc kernel: Initializing cgroup subsys cpuacct
    Jun 14 16:13:03 wishthinkpad.loc kernel: Initializing cgroup subsys memory
    Jun 14 16:13:03 wishthinkpad.loc kernel: Initializing cgroup subsys devices
    Jun 14 16:13:03 wishthinkpad.loc kernel: Initializing cgroup subsys freezer
    Jun 14 16:13:03 wishthinkpad.loc kernel: Initializing cgroup subsys net_cls
    Jun 14 16:13:03 wishthinkpad.loc kernel: Initializing cgroup subsys blkio
    Jun 14 16:13:03 wishthinkpad.loc kernel: mce: CPU supports 5 MCE banks
    Jun 14 16:13:03 wishthinkpad.loc kernel: [113B blob data]
    Jun 14 16:13:03 wishthinkpad.loc kernel: Freeing SMP alternatives: 16k freed
    Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: Core revision 20130117
    Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: All ACPI Tables successfully acquired
    Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: setting ELCR to 0a00 (from 0800)
    Jun 14 16:13:03 wishthinkpad.loc kernel: ftrace: allocating 18428 entries in 36 pages
    Jun 14 16:13:03 wishthinkpad.loc kernel: smpboot: weird, boot CPU (#0) not listed by the BIOS
    Jun 14 16:13:03 wishthinkpad.loc kernel: smpboot: SMP motherboard not detected
    Jun 14 16:13:03 wishthinkpad.loc kernel: smpboot: Local APIC not detected. Using dummy APIC emulation.
    Jun 14 16:13:03 wishthinkpad.loc kernel: smpboot: SMP disabled
    Jun 14 16:13:03 wishthinkpad.loc kernel: Performance Events:
    Jun 14 16:13:03 wishthinkpad.loc kernel: no APIC, boot with the "lapic" boot parameter to force-enable it.
    Jun 14 16:13:03 wishthinkpad.loc kernel: no hardware sampling interrupt available.
    Jun 14 16:13:03 wishthinkpad.loc kernel: p6 PMU driver.
    Jun 14 16:13:03 wishthinkpad.loc kernel: ... version: 0
    Jun 14 16:13:03 wishthinkpad.loc kernel: ... bit width: 32
    Jun 14 16:13:03 wishthinkpad.loc kernel: ... generic registers: 2
    Jun 14 16:13:03 wishthinkpad.loc kernel: ... value mask: 00000000ffffffff
    Jun 14 16:13:03 wishthinkpad.loc kernel: ... max period: 000000007fffffff
    Jun 14 16:13:03 wishthinkpad.loc kernel: ... fixed-purpose events: 0
    Jun 14 16:13:03 wishthinkpad.loc kernel: ... event mask: 0000000000000003
    Jun 14 16:13:03 wishthinkpad.loc kernel: Brought up 1 CPUs
    Jun 14 16:13:03 wishthinkpad.loc kernel: smpboot: Total of 1 processors activated (728.31 BogoMIPS)
    Jun 14 16:13:03 wishthinkpad.loc kernel: NMI watchdog: disabled (cpu0): not supported (no LAPIC?)
    Jun 14 16:13:03 wishthinkpad.loc kernel: devtmpfs: initialized
    Jun 14 16:13:03 wishthinkpad.loc kernel: PM: Registering ACPI NVS region [mem 0x19fdf000-0x19fdffff] (4096 bytes)
    Jun 14 16:13:03 wishthinkpad.loc kernel: RTC time: 15:12:55, date: 06/14/13
    Jun 14 16:13:03 wishthinkpad.loc kernel: NET: Registered protocol family 16
    Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: bus type PCI registered
    Jun 14 16:13:03 wishthinkpad.loc kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd880, last bus=7
    Jun 14 16:13:03 wishthinkpad.loc kernel: PCI: Using configuration type 1 for base access
    Jun 14 16:13:03 wishthinkpad.loc kernel: bio: create slab <bio-0> at 0
    Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: Added _OSI(Module Device)
    Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: Added _OSI(Processor Device)
    Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
    Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: Added _OSI(Processor Aggregator Device)
    Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: EC: Look up EC in DSDT
    Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: Interpreter enabled
    Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: (supports S0 S1 S2 S3 S4 S5)
    Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: Using PIC for interrupt routing
    Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: Power Resource [PVID] (on)
    Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: Power Resource [PSIO] (on)
    Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: Power Resource [PRSD] (off)
    Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: Power Resource [PFN0] (off)
    Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: Power Resource [PFN1] (off)
    Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: Power Resource [PDCK] (on)
    Jun 14 16:13:03 wishthinkpad.loc kernel: acpi root: \_SB_.PCI0 notify handler is installed
    Jun 14 16:13:03 wishthinkpad.loc kernel: Found 1 acpi root devices
    Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
    Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: ACPI Dock Station Driver: 1 docks/bays found
    Jun 14 16:13:03 wishthinkpad.loc kernel: vgaarb: loaded
    Jun 14 16:13:03 wishthinkpad.loc kernel: PCI: Probing PCI hardware
    Jun 14 16:13:03 wishthinkpad.loc kernel: PCI: root bus 00: using default resources
    Jun 14 16:13:03 wishthinkpad.loc kernel: PCI: Probing PCI hardware (bus 00)
    Jun 14 16:13:03 wishthinkpad.loc kernel: PCI host bridge to bus 0000:00
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:00.0: [8086:7190] type 00 class 0x060000
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:00.0: reg 10: [mem 0x40000000-0x43ffffff pref]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:01.0: [8086:7191] type 01 class 0x060400
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: [104c:ac1d] type 02 class 0x060700
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: reg 10: [mem 0x50102000-0x50102fff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: supports D1 D2
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: [104c:ac1d] type 02 class 0x060700
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: reg 10: [mem 0x50101000-0x50101fff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: supports D1 D2
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:06.0: [1013:6001] type 00 class 0x040100
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:06.0: reg 10: [mem 0x50100000-0x50100fff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:06.0: reg 14: [mem 0x50000000-0x500fffff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:07.0: [8086:7110] type 00 class 0x068000
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:07.1: [8086:7111] type 00 class 0x010180
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:07.1: reg 20: [io 0xfcf0-0xfcff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:07.2: [8086:7112] type 00 class 0x0c0300
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:07.2: reg 20: [io 0x8400-0x841f]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:07.3: [8086:7113] type 00 class 0x068000
    Jun 14 16:13:03 wishthinkpad.loc kernel: [131B blob data]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:07.3: quirk: [io 0xef00-0xef3f] claimed by PIIX4 ACPI
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:07.3: quirk: [io 0xefa0-0xefaf] claimed by PIIX4 SMB
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:07.3: PIIX4 devres B PIO at 02f8-02ff
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:07.3: PIIX4 devres E PIO at 0538-053f
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:07.3: PIIX4 devres G PIO at 0130-013f
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:07.3: PIIX4 devres I PIO at 002e-002f
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:01:00.0: [10c8:0005] type 00 class 0x030000
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xe0ffffff pref]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:01:00.0: reg 14: [mem 0x70000000-0x703fffff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:01:00.0: reg 18: [mem 0x70400000-0x704fffff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:01:00.0: supports D1 D2
    Jun 14 16:13:03 wishthinkpad.loc kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:01.0: bridge window [mem 0x70000000-0xdfffffff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf7ffffff pref]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 05
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 09
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 09
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:07.0: PIIX/ICH IRQ router [8086:7110]
    Jun 14 16:13:03 wishthinkpad.loc kernel: PCI: pci_cache_line_size set to 32 bytes
    Jun 14 16:13:03 wishthinkpad.loc kernel: e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: e820: reserve RAM buffer [mem 0x19fd0000-0x1bffffff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: NetLabel: Initializing
    Jun 14 16:13:03 wishthinkpad.loc kernel: NetLabel: domain hash size = 128
    Jun 14 16:13:03 wishthinkpad.loc kernel: NetLabel: protocols = UNLABELED CIPSOv4
    Jun 14 16:13:03 wishthinkpad.loc kernel: NetLabel: unlabeled traffic allowed by default
    Jun 14 16:13:03 wishthinkpad.loc kernel: Switching to clocksource pit
    Jun 14 16:13:03 wishthinkpad.loc kernel: pnp: PnP ACPI init
    Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: bus type PNP registered
    Jun 14 16:13:03 wishthinkpad.loc kernel: system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
    Jun 14 16:13:03 wishthinkpad.loc kernel: system 00:00: [mem 0x000c0000-0x000cbfff] could not be reserved
    Jun 14 16:13:03 wishthinkpad.loc kernel: system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
    Jun 14 16:13:03 wishthinkpad.loc kernel: system 00:00: [mem 0x00100000-0x19ffffff] could not be reserved
    Jun 14 16:13:03 wishthinkpad.loc kernel: system 00:00: [mem 0xfffe0000-0xffffffff] has been reserved
    Jun 14 16:13:03 wishthinkpad.loc kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
    Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:02: [dma 2]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
    Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (disabled)
    Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
    Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:05: [dma 3]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:05: Plug and Play ACPI device, IDs IBM0071 PNP0511 (active)
    Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:06: Plug and Play ACPI device, IDs CSC0110 (active)
    Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:07: [dma 1]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:07: [dma 0]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:07: Plug and Play ACPI device, IDs CSC0100 (active)
    Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:08: Plug and Play ACPI device, IDs CSC0101 PNPb02f (active)
    Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:09: Plug and Play ACPI device, IDs CSC0103 (disabled)
    Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:0a: [dma 7]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:0a: Plug and Play ACPI device, IDs IBM3765 (active)
    Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:0b: [dma 4]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:0b: Plug and Play ACPI device, IDs PNP0200 (active)
    Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:0c: Plug and Play ACPI device, IDs PNP0800 (active)
    Jun 14 16:13:03 wishthinkpad.loc kernel: system 00:0d: [io 0x15e0-0x15ef] has been reserved
    Jun 14 16:13:03 wishthinkpad.loc kernel: system 00:0d: [io 0xef00-0xef3f] has been reserved
    Jun 14 16:13:03 wishthinkpad.loc kernel: system 00:0d: [io 0xefa0-0xefaf] has been reserved
    Jun 14 16:13:03 wishthinkpad.loc kernel: system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:0e: Plug and Play ACPI device, IDs PNP0c04 (active)
    Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:0f: Plug and Play ACPI device, IDs PNP0303 (active)
    Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:10: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active)
    Jun 14 16:13:03 wishthinkpad.loc kernel: pnp 00:11: Plug and Play ACPI device, IDs PNP0b00 (active)
    Jun 14 16:13:03 wishthinkpad.loc kernel: pnp: PnP ACPI: found 18 devices
    Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: bus type PNP unregistered
    Jun 14 16:13:03 wishthinkpad.loc kernel: Switching to clocksource acpi_pm
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: BAR 15: assigned [mem 0x1c000000-0x1fffffff pref]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: BAR 16: assigned [mem 0x20000000-0x23ffffff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: BAR 15: assigned [mem 0x24000000-0x27ffffff pref]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: BAR 16: assigned [mem 0x28000000-0x2bffffff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x10ff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: BAR 14: assigned [io 0x1400-0x14ff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: BAR 13: assigned [io 0x1800-0x18ff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: BAR 14: assigned [io 0x1c00-0x1cff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:01.0: bridge window [mem 0x70000000-0xdfffffff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf7ffffff pref]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: CardBus bridge to [bus 02-05]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: bridge window [io 0x1000-0x10ff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: bridge window [io 0x1400-0x14ff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: bridge window [mem 0x1c000000-0x1fffffff pref]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: bridge window [mem 0x20000000-0x23ffffff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: CardBus bridge to [bus 06-09]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: bridge window [io 0x1800-0x18ff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: bridge window [io 0x1c00-0x1cff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: bridge window [mem 0x24000000-0x27ffffff pref]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: bridge window [mem 0x28000000-0x2bffffff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: PCI: setting IRQ 11 as level-triggered
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: found PCI INT A -> IRQ 11
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.0: sharing IRQ 11 with 0000:01:00.0
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:02.1: found PCI INT B -> IRQ 11
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:01: resource 1 [mem 0x70000000-0xdfffffff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf7ffffff pref]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:02: resource 0 [io 0x1000-0x10ff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:02: resource 1 [io 0x1400-0x14ff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:02: resource 2 [mem 0x1c000000-0x1fffffff pref]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:02: resource 3 [mem 0x20000000-0x23ffffff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:06: resource 0 [io 0x1800-0x18ff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:06: resource 1 [io 0x1c00-0x1cff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:06: resource 2 [mem 0x24000000-0x27ffffff pref]
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci_bus 0000:06: resource 3 [mem 0x28000000-0x2bffffff]
    Jun 14 16:13:03 wishthinkpad.loc kernel: NET: Registered protocol family 2
    Jun 14 16:13:03 wishthinkpad.loc kernel: TCP established hash table entries: 4096 (order: 3, 32768 bytes)
    Jun 14 16:13:03 wishthinkpad.loc kernel: TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
    Jun 14 16:13:03 wishthinkpad.loc kernel: TCP: Hash tables configured (established 4096 bind 4096)
    Jun 14 16:13:03 wishthinkpad.loc kernel: TCP: reno registered
    Jun 14 16:13:03 wishthinkpad.loc kernel: UDP hash table entries: 256 (order: 1, 8192 bytes)
    Jun 14 16:13:03 wishthinkpad.loc kernel: UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    Jun 14 16:13:03 wishthinkpad.loc kernel: NET: Registered protocol family 1
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:00.0: Limiting direct PCI/PCI transfers
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:00:07.2: found PCI INT D -> IRQ 11
    Jun 14 16:13:03 wishthinkpad.loc kernel: pci 0000:01:00.0: Boot video device
    Jun 14 16:13:03 wishthinkpad.loc kernel: PCI: CLS 32 bytes, default 32
    Jun 14 16:13:03 wishthinkpad.loc kernel: Unpacking initramfs...
    Jun 14 16:13:03 wishthinkpad.loc kernel: Freeing initrd memory: 4020k freed
    Jun 14 16:13:03 wishthinkpad.loc kernel: IBM machine detected. Enabling interrupts during APM calls.
    Jun 14 16:13:03 wishthinkpad.loc kernel: apm: BIOS not found.
    Jun 14 16:13:03 wishthinkpad.loc kernel: Scanning for low memory corruption every 60 seconds
    Jun 14 16:13:03 wishthinkpad.loc kernel: audit: initializing netlink socket (disabled)
    Jun 14 16:13:03 wishthinkpad.loc kernel: type=2000 audit(1371222775.660:1): initialized
    Jun 14 16:13:03 wishthinkpad.loc kernel: HugeTLB registered 4 MB page size, pre-allocated 0 pages
    Jun 14 16:13:03 wishthinkpad.loc kernel: VFS: Disk quotas dquot_6.5.2
    Jun 14 16:13:03 wishthinkpad.loc kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Jun 14 16:13:03 wishthinkpad.loc kernel: msgmni has been set to 807
    Jun 14 16:13:03 wishthinkpad.loc kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    Jun 14 16:13:03 wishthinkpad.loc kernel: io scheduler noop registered
    Jun 14 16:13:03 wishthinkpad.loc kernel: io scheduler deadline registered
    Jun 14 16:13:03 wishthinkpad.loc kernel: io scheduler cfq registered (default)
    Jun 14 16:13:03 wishthinkpad.loc kernel: vesafb: mode is 1024x768x24, linelength=3072, pages=0
    Jun 14 16:13:03 wishthinkpad.loc kernel: vesafb: scrolling: redraw
    Jun 14 16:13:03 wishthinkpad.loc kernel: vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    Jun 14 16:13:03 wishthinkpad.loc kernel: vesafb: framebuffer at 0xe0000000, mapped to 0xda800000, using 2304k, total 2304k
    Jun 14 16:13:03 wishthinkpad.loc kernel: Console: switching to colour frame buffer device 128x48
    Jun 14 16:13:03 wishthinkpad.loc kernel: fb0: VESA VGA frame buffer device
    Jun 14 16:13:03 wishthinkpad.loc kernel: intel_idle: does not run on family 6 model 6
    Jun 14 16:13:03 wishthinkpad.loc kernel: GHES: HEST is not enabled!
    Jun 14 16:13:03 wishthinkpad.loc kernel: isapnp: Scanning for PnP cards...
    Jun 14 16:13:03 wishthinkpad.loc kernel: isapnp: No Plug & Play device found
    Jun 14 16:13:03 wishthinkpad.loc kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Jun 14 16:13:03 wishthinkpad.loc kernel: serial 00:03: [io 0x03e8-0x03ef]
    Jun 14 16:13:03 wishthinkpad.loc kernel: serial 00:03: [io 0x02e8-0x02ef]
    Jun 14 16:13:03 wishthinkpad.loc kernel: serial 00:03: unable to assign resources
    Jun 14 16:13:03 wishthinkpad.loc kernel: serial: probe of 00:03 failed with error -16
    Jun 14 16:13:03 wishthinkpad.loc kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
    Jun 14 16:13:03 wishthinkpad.loc kernel: i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:MOU0] at 0x60,0x64 irq 1,12
    Jun 14 16:13:03 wishthinkpad.loc kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Jun 14 16:13:03 wishthinkpad.loc kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
    Jun 14 16:13:03 wishthinkpad.loc kernel: mousedev: PS/2 mouse device common for all mice
    Jun 14 16:13:03 wishthinkpad.loc kernel: rtc_cmos 00:11: RTC can wake from S4
    Jun 14 16:13:03 wishthinkpad.loc kernel: rtc_cmos 00:11: rtc core: registered rtc_cmos as rtc0
    Jun 14 16:13:03 wishthinkpad.loc kernel: rtc_cmos 00:11: alarms up to one month, y3k, 242 bytes nvram
    Jun 14 16:13:03 wishthinkpad.loc kernel: cpuidle: using governor ladder
    Jun 14 16:13:03 wishthinkpad.loc kernel: cpuidle: using governor menu
    Jun 14 16:13:03 wishthinkpad.loc kernel: EFI Variables Facility v0.08 2004-May-17
    Jun 14 16:13:03 wishthinkpad.loc kernel: drop_monitor: Initializing network drop monitor service
    Jun 14 16:13:03 wishthinkpad.loc kernel: TCP: cubic registered
    Jun 14 16:13:03 wishthinkpad.loc kernel: NET: Registered protocol family 10
    Jun 14 16:13:03 wishthinkpad.loc kernel: NET: Registered protocol family 17
    Jun 14 16:13:03 wishthinkpad.loc kernel: Key type dns_resolver registered
    Jun 14 16:13:03 wishthinkpad.loc kernel: Using IPI No-Shortcut mode
    Jun 14 16:13:03 wishthinkpad.loc kernel: PM: Hibernation image not present or could not be loaded.
    Jun 14 16:13:03 wishthinkpad.loc kernel: registered taskstats version 1
    Jun 14 16:13:03 wishthinkpad.loc kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    Jun 14 16:13:03 wishthinkpad.loc kernel: Magic number: 1:809:234
    Jun 14 16:13:03 wishthinkpad.loc kernel: rtc_cmos 00:11: setting system clock to 2013-06-14 15:12:57 UTC (1371222777)
    Jun 14 16:13:03 wishthinkpad.loc kernel: Freeing unused kernel memory: 572k freed
    Jun 14 16:13:03 wishthinkpad.loc kernel: Write protecting the kernel text: 4180k
    Jun 14 16:13:03 wishthinkpad.loc kernel: Write protecting the kernel read-only data: 1300k
    Jun 14 16:13:03 wishthinkpad.loc systemd-udevd[37]: starting version 204
    Jun 14 16:13:03 wishthinkpad.loc kernel: tsc: Refined TSC clocksource calibration: 363.959 MHz
    Jun 14 16:13:03 wishthinkpad.loc kernel: Switching to clocksource tsc
    Jun 14 16:13:03 wishthinkpad.loc kernel: Floppy drive(s): fd0 is 1.44M
    Jun 14 16:13:03 wishthinkpad.loc kernel: FDC 0 is a National Semiconductor PC87306
    Jun 14 16:13:03 wishthinkpad.loc kernel: SCSI subsystem initialized
    Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: bus type USB registered
    Jun 14 16:13:03 wishthinkpad.loc kernel: usbcore: registered new interface driver usbfs
    Jun 14 16:13:03 wishthinkpad.loc kernel: usbcore: registered new interface driver hub
    Jun 14 16:13:03 wishthinkpad.loc kernel: usbcore: registered new device driver usb
    Jun 14 16:13:03 wishthinkpad.loc kernel: uhci_hcd: USB Universal Host Controller Interface driver
    Jun 14 16:13:03 wishthinkpad.loc kernel: uhci_hcd 0000:00:07.2: found PCI INT D -> IRQ 11
    Jun 14 16:13:03 wishthinkpad.loc kernel: uhci_hcd 0000:00:07.2: UHCI Host Controller
    Jun 14 16:13:03 wishthinkpad.loc kernel: uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
    Jun 14 16:13:03 wishthinkpad.loc kernel: uhci_hcd 0000:00:07.2: irq 11, io base 0x00008400
    Jun 14 16:13:03 wishthinkpad.loc kernel: hub 1-0:1.0: USB hub found
    Jun 14 16:13:03 wishthinkpad.loc kernel: hub 1-0:1.0: 2 ports detected
    Jun 14 16:13:03 wishthinkpad.loc kernel: ACPI: bus type ATA registered
    Jun 14 16:13:03 wishthinkpad.loc kernel: libata version 3.00 loaded.
    Jun 14 16:13:03 wishthinkpad.loc kernel: ata_piix 0000:00:07.1: version 2.13
    Jun 14 16:13:03 wishthinkpad.loc kernel: scsi0 : ata_piix
    Jun 14 16:13:03 wishthinkpad.loc kernel: scsi1 : ata_piix
    Jun 14 16:13:03 wishthinkpad.loc kernel: ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xfcf0 irq 14
    Jun 14 16:13:03 wishthinkpad.loc kernel: ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xfcf8 irq 15
    Jun 14 16:13:03 wishthinkpad.loc kernel: ata2.00: ATAPI: QSI CD-RW/DVD-ROM SBW-242, UD22, max UDMA/33
    Jun 14 16:13:03 wishthinkpad.loc kernel: ata1.00: ATA-6: TOSHIBA MK4032GAX, AD101A, max UDMA/100
    Jun 14 16:13:03 wishthinkpad.loc kernel: ata1.00: 78140160 sectors, multi 16: LBA48
    Jun 14 16:13:03 wishthinkpad.loc kernel: ata2.00: configured for UDMA/33
    Jun 14 16:13:03 wishthinkpad.loc kernel: ata1.00: configured for UDMA/33
    Jun 14 16:13:03 wishthinkpad.loc kernel: scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK4032GA AD10 PQ: 0 ANSI: 5
    Jun 14 16:13:03 wishthinkpad.loc kernel: scsi 1:0:0:0: CD-ROM QSI CDRW/DVD SBW-242 UD22 PQ: 0 ANSI: 5
    Jun 14 16:13:03 wishthinkpad.loc kernel: usb 1-1: new full-speed USB device number 2 using uhci_hcd
    Jun 14 16:13:03 wishthinkpad.loc kernel: sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
    Jun 14 16:13:03 wishthinkpad.loc kernel: sd 0:0:0:0: [sda] Write Protect is off
    Jun 14 16:13:03 wishthinkpad.loc kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Jun 14 16:13:03 wishthinkpad.loc kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Jun 14 16:13:03 wishthinkpad.loc kernel: sr0: scsi3-mmc drive: 4x/24x writer cd/rw xa/form2 cdda tray
    Jun 14 16:13:03 wishthinkpad.loc kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
    Jun 14 16:13:03 wishthinkpad.loc kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
    Jun 14 16:13:03 wishthinkpad.loc kernel: sda: sda1 sda2 < sda5 sda6 sda7 >
    Jun 14 16:13:03 wishthinkpad.loc kernel: sd 0:0:0:0: [sda] Attached SCSI disk
    Jun 14 16:13:03 wishthinkpad.loc kernel: hub 1-1:1.0: USB hub found
    Jun 14 16:13:03 wishthinkpad.loc kernel: hub 1-1:1.0: 4 ports detected
    Jun 14 16:13:03 wishthinkpad.loc kernel: usb 1-1.1: new full-speed USB device number 3 using uhci_hcd
    Jun 14 16:13:03 wishthinkpad.loc kernel: usb 1-1.2: new low-speed USB device number 4 using uhci_hcd
    Jun 14 16:13:03 wishthinkpad.loc kernel: hidraw: raw HID events driver (C) Jiri Kosina
    Jun 14 16:13:03 wishthinkpad.loc kernel: usbcore: registered new interface driver usbhid
    Jun 14 16:13:03 wishthinkpad.loc kernel: usbhid: USB HID core driver
    Jun 14 16:13:03 wishthinkpad.loc kernel: usb 1-1.4: new full-speed USB device number 5 using uhci_hcd
    Jun 14 16:13:03 wishthinkpad.loc kernel: input: MLK Silvercrest OM1008 as /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1.2/1-1.2:1.0/input/input1
    Jun 14 16:13:03 wishthinkpad.loc kernel: hid-generic 0003:04FC:0538.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [MLK Silvercrest OM1008] on usb-0000:00:07.2-1.2/input0
    Jun 14 16:13:03 wishthinkpad.loc kernel: usb 1-1.4: Parent hub missing LPM exit latency info. Power management will be impacted.
    Jun 14 16:13:03 wishthinkpad.loc kernel: Initializing USB Mass Storage driver...
    Jun 14 16:13:03 wishthinkpad.loc kernel: scsi2 : usb-storage 1-1.4:1.0
    Jun 14 16:13:03 wishthinkpad.loc kernel: usbcore: registered new interface driver usb-storage
    Jun 14 16:13:03 wishthinkpad.loc kernel: USB Mass Storage support registered.
    Jun 14 16:13:03 wishthinkpad.loc kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    Jun 14 16:13:03 wishthinkpad.loc kernel: scsi 2:0:0:0: Direct-Access Corsair Voyager GT 3.0 1.00 PQ: 0 ANSI: 4
    Jun 14 16:13:03 wishthinkpad.loc kernel: sd 2:0:0:0: [sdb] 31334400 512-byte logical blocks: (16.0 GB/14.9 GiB)
    Jun 14 16:13:03 wishthinkpad.loc kernel: sd 2:0:0:0: [sdb] Write Protect is off
    Jun 14 16:13:03 wishthinkpad.loc kernel: sd 2:0:0:0: [sdb] Mode Sense: bf 00 00 00
    Jun 14 16:13:03 wishthinkpad.loc kernel: sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    Jun 14 16:13:03 wishthinkpad.loc kernel: sdb: sdb1
    Jun 14 16:13:03 wishthinkpad.loc kernel: sd 2:0:0:0: [sdb] Attached SCSI removable disk
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: systemd 204 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Set hostname to <wishthinkpad.loc>.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Cannot add dependency job for unit syslog-ng.service, ignoring: Unit syslog-ng.service failed to load: No such file or directory. See system logs and 'systemctl status syslog-ng.service' for details.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting Remote File Systems.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Reached target Remote File Systems.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Expecting device sys-subsystem-net-devices-wlan0.device...
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting Delayed Shutdown Socket.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Listening on Delayed Shutdown Socket.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting Device-mapper event daemon FIFOs.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Listening on Device-mapper event daemon FIFOs.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting LVM2 metadata daemon socket.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Listening on LVM2 metadata daemon socket.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting Encrypted Volumes.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Reached target Encrypted Volumes.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting Paths.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Reached target Paths.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting udev Kernel Socket.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Listening on udev Kernel Socket.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting udev Control Socket.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Listening on udev Control Socket.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting Journal Socket.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Listening on Journal Socket.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Mounting Huge Pages File System...
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting Create static device nodes in /dev...
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting Apply Kernel Variables...
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Started Load Kernel Modules.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Mounted FUSE Control File System.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Mounting Configuration File System...
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting udev Coldplug all Devices...
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting Journal Service...
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Started Journal Service.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Started Set Up Additional Binary Formats.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Mounting Debug File System...
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Mounting POSIX Message Queue File System...
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting Setup Virtual Console...
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Expecting device dev-disk-by\x2duuid-0a64bde1\x2d82c3\x2d4cfb\x2dab68\x2d7178564d8ed5.device...
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Started File System Check on Root Device.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting Remount Root and Kernel File Systems...
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Expecting device dev-disk-by\x2duuid-567947ca\x2dcba3\x2d42e4\x2d9677\x2de9ddeecd2c26.device...
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Expecting device dev-disk-by\x2duuid-e4eb21d7\x2d8ea8\x2d4059\x2db44b\x2d778690e44675.device...
    Jun 14 16:13:03 wishthinkpad.loc kernel: EXT4-fs (sda1): re-mounted. Opts: (null)
    Jun 14 16:13:03 wishthinkpad.loc systemd-udevd[99]: starting version 204
    Jun 14 16:13:03 wishthinkpad.loc systemd-journal[90]: Journal started
    Jun 14 16:13:03 wishthinkpad.loc systemd-sysctl[87]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Started Apply Kernel Variables.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Started udev Coldplug all Devices.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Started Create static device nodes in /dev.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting udev Kernel Device Manager...
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Mounted Huge Pages File System.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Mounted POSIX Message Queue File System.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Mounted Debug File System.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Mounted Configuration File System.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Started Remount Root and Kernel File Systems.
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Starting Load Random Seed...
    Jun 14 16:13:03 wishthinkpad.loc systemd[1]: Mounted /tmp.
    Jun 14 16:13:04 wishthinkpad.loc systemd[1]: Started Load Random Seed.
    Jun 14 16:13:04 wishthinkpad.loc systemd[1]: Started Setup Virtual Console.
    Jun 14 16:13:05 wishthinkpad.loc kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
    Jun 14 16:13:05 wishthinkpad.loc kernel: ACPI: Lid Switch [LID0]
    Jun 14 16:13:05 wishthinkpad.loc kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
    Jun 14 16:13:05 wishthinkpad.loc kernel: ACPI: Sleep Button [SLPB]
    Jun 14 16:13:05 wishthinkpad.loc kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    Jun 14 16:13:05 wishthinkpad.loc kernel: ACPI: Power Button [PWRF]
    Jun 14 16:13:05 wishthinkpad.loc kernel: Linux agpgart interface v0.103
    Jun 14 16:13:05 wishthinkpad.loc kernel: tsc: Marking TSC unstable due to TSC halts in idle
    Jun 14 16:13:05 wishthinkpad.loc kernel: Switching to clocksource acpi_pm
    Jun 14 16:13:05 wishthinkpad.loc kernel: ACPI: acpi_idle registered with cpuidle
    Jun 14 16:13:05 wishthinkpad.loc kernel: piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
    Jun 14 16:13:05 wishthinkpad.loc kernel: piix4_smbus: probe of 0000:00:07.3 failed with error -1
    Jun 14 16:13:06 wishthinkpad.loc kernel: yenta_cardbus 0000:00:02.0: CardBus bridge found [1014:00eb]
    Jun 14 16:13:06 wishthinkpad.loc kernel: yenta_cardbus 0000:00:02.0: Enabling burst memory read transactions
    Jun 14 16:13:06 wishthinkpad.loc kernel: yenta_cardbus 0000:00:02.0: Using CSCINT to route CSC interrupts to PCI
    Jun 14 16:13:06 wishthinkpad.loc kernel: yenta_cardbus 0000:00:02.0: Routing CardBus interrupts to PCI
    Jun 14 16:13:06 wishthinkpad.loc kernel: yenta_cardbus 0000:00:02.0: TI: mfunc 0xfba97543, devctl 0x62
    Jun 14 16:13:06 wishthinkpad.loc kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Jun 14 16:13:06 wishthinkpad.loc kernel: gameport gameport0: NS558 PnP Gameport is pnp00:08/gameport0, io 0x200, speed 685kHz
    Jun 14 16:13:06 wishthinkpad.loc kernel: parport_pc 00:04: reported by Plug and Play ACPI
    Jun 14 16:13:06 wishthinkpad.loc kernel: parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
    Jun 14 16:13:06 wishthinkpad.loc kernel: NET: Registered protocol family 23
    Jun 14 16:13:06 wishthinkpad.loc kernel: ACPI: AC Adapter [AC] (on-line)
    Jun 14 16:13:06 wishthinkpad.loc kernel: yenta_cardbus 0000:00:02.0: ISA IRQ mask 0x0418, PCI irq 11
    Jun 14 16:13:06 wishthinkpad.loc kernel: yenta_cardbus 0000:00:02.0: Socket status: 30000006
    Jun 14 16:13:06 wishthinkpad.loc kernel: nsc-ircc, chip->init
    Jun 14 16:13:06 wishthinkpad.loc kernel: nsc-ircc, Found chip at base=0x02e
    Jun 14 16:13:06 wishthinkpad.loc kernel: nsc-ircc, driver loaded (Dag Brattli)
    Jun 14 16:13:06 wishthinkpad.loc kernel: nsc_ircc_open(), can't get iobase of 0x3f8
    Jun 14 16:13:06 wishthinkpad.loc kernel: nsc-ircc, Found chip at base=0x02e
    Jun 14 16:13:06 wishthinkpad.loc kernel: nsc-ircc, driver loaded (Dag Brattli)
    Jun 14 16:13:06 wishthinkpad.loc kernel: nsc_ircc_open(), can't get iobase of 0x3f8
    Jun 14 16:13:06 wishthinkpad.loc kernel: nsc-ircc 00:05: disabled
    Jun 14 16:13:06 wishthinkpad.loc kernel: yenta_cardbus 0000:00:02.1: CardBus bridge found [1014:00eb]
    Jun 14 16:13:06 wishthinkpad.loc kernel: yenta_cardbus 0000:00:02.1: Using CSCINT to route CSC interrupts to PCI
    Jun 14 16:13:06 wishthinkpad.loc kernel: yenta_cardbus 0000:00:02.1: Routing CardBus interrupts to PCI
    Jun 14 16:13:06 wishthinkpad.loc kernel: yenta_cardbus 0000:00:02.1: TI: mfunc 0xfba97543, devctl 0x62
    Jun 14 16:13:06 wishthinkpad.loc kernel: thermal LNXTHERM:00: registered as thermal_zone0
    Jun 14 16:13:06 wishthinkpad.loc kernel: ACPI: Thermal Zone [THM0] (77 C)
    Jun 14 16:13:06 wishthinkpad.loc kernel: thermal LNXTHERM:01: registered as thermal_zone1
    Jun 14 16:13:06 wishthinkpad.loc kernel: ACPI: Thermal Zone [THM2] (35 C)
    Jun 14 16:13:06 wishthinkpad.loc kernel: ACPI: Fan [FN00] (off)
    Jun 14 16:13:06 wishthinkpad.loc kernel: ACPI: Fan [FN01] (off)
    Jun 14 16:13:06 wishthinkpad.loc kernel: ACPI: Fan [FN20] (off)
    Jun 14 16:13:06 wishthinkpad.loc kernel: ACPI: Fan [FN21] (off)
    Jun 14 16:13:06 wishthinkpad.loc kernel: ACPI: Fan [FN60] (off)
    Jun 14 16:13:06 wishthinkpad.loc kernel: ACPI: Fan [FN61] (off)
    Jun 14 16:13:06 wishthinkpad.loc kernel: ACPI: Fan [FN70] (off)
    Jun 14 16:13:06 wishthinkpad.loc kernel: ACPI: Fan [FN71] (off)
    Jun 14 16:13:06 wishthinkpad.loc kernel: thermal LNXTHERM:02: registered as thermal_zone2
    Jun 14 16:13:06 wishthinkpad.loc kernel: ACPI: Thermal Zone [THM6] (27 C)
    Jun 14 16:13:06 wishthinkpad.loc kernel: thermal LNXTHERM:03: registered as thermal_zone3
    Jun 14 16:13:06 wishthinkpad.loc kernel: ACPI: Thermal Zone [THM7] (27 C)
    Jun 14 16:13:06 wishthinkpad.loc systemd[1]: Starting Sound Card.
    Jun 14 16:13:06 wishthinkpad.loc systemd[1]: Reached target Sound Card.
    Jun 14 16:13:07 wishthinkpad.loc kernel: cfg80211: Calling CRDA to update world regulatory domain
    Jun 14 16:13:07 wishthinkpad.loc kernel: microcode: CPU0 sig=0x66a, pf=0x8, revision=0xa
    Jun 14 16:13:07 wishthinkpad.loc kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    Jun 14 16:13:07 wishthinkpad.loc kernel: psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
    Jun 14 16:13:07 wishthinkpad.loc kernel: psmouse serio1: hgpk: ID: 10 00 64
    Jun 14 16:13:08 wishthinkpad.loc kernel: psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0b, buttons: 3/3
    Jun 14 16:13:08 wishthinkpad.loc kernel: input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5
    Jun 14 16:13:08 wishthinkpad.loc kernel: usb 1-1.1: reset full-speed USB device number 3 using uhci_hcd
    Jun 14 16:13:08 wishthinkpad.loc systemd[1]: Found device TOSHIBA_MK4032GAX.
    Jun 14 16:13:08 wishthinkpad.loc systemd[1]: Starting File System Check on /dev/disk/by-uuid/567947ca-cba3-42e4-9677-e9ddeecd2c26...
    Jun 14 16:13:09 wishthinkpad.loc kernel: phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 2573, rf: 0002, rev: 000a.
    Jun 14 16:13:09 wishthinkpad.loc systemd[1]: Found device TOSHIBA_MK4032GAX.
    Jun 14 16:13:09 wishthinkpad.loc systemd[1]: Activating swap /dev/disk/by-uuid/0a64bde1-82c3-4cfb-ab68-7178564d8ed5...
    Jun 14 16:13:09 wishthinkpad.loc kernel: ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    Jun 14 16:13:09 wishthinkpad.loc kernel: usbcore: registered new interface driver rt73usb
    Jun 14 16:13:09 wishthinkpad.loc kernel: Adding 995992k swap on /dev/sda5. Priority:-1 extents:1 across:995992k
    Jun 14 16:13:09 wishthinkpad.loc systemd[1]: Activated swap /dev/disk/by-uuid/0a64bde1-82c3-4cfb-ab68-7178564d8ed5.
    Jun 14 16:13:09 wishthinkpad.loc systemd[1]: Starting Swap.
    Jun 14 16:13:09 wishthinkpad.loc systemd[1]: Reached target Swap.
    Jun 14 16:13:09 wishthinkpad.loc systemd-fsck[140]: /dev/sda6: clean, 62025/65280 files, 185105/261048 blocks
    Jun 14 16:13:09 wishthinkpad.loc systemd[1]: Found device TOSHIBA_MK4032GAX.
    Jun 14 16:13:09 wishthinkpad.loc systemd[1]: Starting File System Check on /dev/disk/by-uuid/e4eb21d7-8ea8-4059-b44b-778690e44675...
    Jun 14 16:13:09 wishthinkpad.loc systemd[1]: Started File System Check on /dev/disk/by-uuid/567947ca-cba3-42e4-9677-e9ddeecd2c26.
    Jun 14 16:13:09 wishthinkpad.loc systemd[1]: Mounting /home...
    Jun 14 16:13:09 wishthinkpad.loc kernel: EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
    Jun 14 16:13:09 wishthinkpad.loc systemd[1]: Mounted /home.
    Jun 14 16:13:09 wishthinkpad.loc kernel: ppdev: user-space parallel port driver
    Jun 14 16:13:09 wishthinkpad.loc systemd-fsck[152]: Data: clean, 249/1692432 files, 5642949/6757332 blocks
    Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Started File System Check on /dev/disk/by-uuid/e4eb21d7-8ea8-4059-b44b-778690e44675.
    Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Mounting /media/Extra...
    Jun 14 16:13:10 wishthinkpad.loc systemd-sysctl[165]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
    Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Mounted /media/Extra.
    Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Starting Local File Systems.
    Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Reached target Local File Systems.
    Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Starting Trigger Flushing of Journal to Persistent Storage...
    Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Starting Recreate Volatile Files and Directories...
    Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Found device RT2501/RT2573 Wireless Adapter.
    Jun 14 16:13:10 wishthinkpad.loc kernel: EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
    Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Started Recreate Volatile Files and Directories.
    Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Starting Update UTMP about System Reboot/Shutdown...
    Jun 14 16:13:10 wishthinkpad.loc systemd-journal[90]: Allowing system journal files to grow to 948.4M.
    Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Started Trigger Flushing of Journal to Persistent Storage.
    Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Started Update UTMP about System Reboot/Shutdown.
    Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Starting System Initialization.
    Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Reached target System Initialization.
    Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Starting D-Bus System Message Bus Socket.
    Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Listening on D-Bus System Message Bus Socket.
    Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Starting Sockets.
    Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Reached target Sockets.
    Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Starting Daily Cleanup of Temporary Directories.
    Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Started Daily Cleanup of Temporary Directories.
    Jun 14 16:13:10 wishthinkpad.loc systemd[1]: Starting Timers.
    Jun 14 16:13:19 wishthinkpad.loc kernel: phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'.
    Jun 14 16:13:11 wishthinkpad.loc crond[176]: (CRON) INFO (Syslog will be used instead of sendmail.)
    Jun 14 16:13:11 wishthinkpad.loc crond[176]: (CRON) INFO (running with inotify support)
    Jun 14 16:13:13 wishthinkpad.loc sshd[178]: Server listening on 0.0.0.0 port 50505.
    Jun 14 16:13:14 wishthinkpad.loc ntpd[200]: ntpd [email protected] Mon May 6 10:21:04 UTC 2013 (1)
    Jun 14 16:13:14 wishthinkpad.loc ntpd[201]: proto: precision = 4.469 usec
    Jun 14 16:13:14 wishthinkpad.loc ntpd[201]: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16
    Jun 14 16:13:14 wishthinkpad.loc ntpd[201]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
    Jun 14 16:13:14 wishthinkpad.loc ntpd[201]: Listen and drop on 1 v6wildcard :: UDP 123
    Jun 14 16:13:14 wishthinkpad.loc ntpd[201]: Listen normally on 2 lo 127.0.0.1 UDP 123
    Jun 14 16:13:14 wishthinkpad.loc ntpd[201]: Listen normally on 3 wlan0 192.168.0.102 UDP 123
    Jun 14 16:13:14 wishthinkpad.loc ntpd[201]: peers refreshed
    Jun 14 16:13:19 wishthinkpad.loc kernel: phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 1.7.
    Jun 14 16:13:19 wishthinkpad.loc kernel: IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    Jun 14 16:13:19 wishthinkpad.loc systemd-logind[179]: Watching system buttons on /dev/input/event4 (Power Button)
    Jun 14 16:13:19 wishthinkpad.loc systemd-logind[179]: Watching system buttons on /dev/input/event2 (Lid Switch)
    Jun 14 16:13:19 wishthinkpad.loc systemd-logind[179]: Watching system buttons on /dev/input/event3 (Sleep Button)
    Jun 14 16:13:19 wishthinkpad.loc kernel: wlan0: authenticate with 00:18:39:a0:db:3e
    Jun 14 16:13:19 wishthinkpad.loc kernel: wlan0: send auth to 00:18:39:a0:db:3e (try 1/3)
    Jun 14 16:13:19 wishthinkpad.loc kernel: wlan0: authenticated
    Jun 14 16:13:19 wishthinkpad.loc kernel: rt73usb 1-1.1:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
    Jun 14 16:13:19 wishthinkpad.loc kernel: rt73usb 1-1.1:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
    Jun 14 16:13:19 wishthinkpad.loc kernel: wlan0: associate with 00:18:39:a0:db:3e (try 1/3)
    Jun 14 16:13:19 wishthinkpad.loc kernel: wlan0: RX AssocResp from 00:18:39:a0:db:3e (capab=0x411 status=0 aid=1)
    Jun 14 16:13:19 wishthinkpad.loc kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    Jun 14 16:13:19 wishthinkpad.loc shorewall[199]: Starting Shorewall....
    Jun 14 16:13:19 wishthinkpad.loc kernel: wlan0: associated
    Jun 14 16:13:19 wishthinkpad.loc kernel: ACPI: Fatal opcode executed
    Jun 14 16:13:19 wishthinkpad.loc kernel: ACPI: Battery Slot [BAT0] (battery present)
    Jun 14 16:13:19 wishthinkpad.loc kernel: ACPI: Battery Slot [BAT1] (battery absent)
    Jun 14 16:13:19 wishthinkpad.loc kernel: yenta_cardbus 0000:00:02.1: ISA IRQ mask 0x0418, PCI irq 11
    Jun 14 16:13:19 wishthinkpad.loc kernel: yenta_cardbus 0000:00:02.1: Socket status: 30000006
    Jun 14 16:13:19 wishthinkpad.loc kernel: agpgart-intel 0000:00:00.0: Intel 440BX Chipset
    Jun 14 16:13:19 wishthinkpad.loc kernel: agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0x40000000
    Jun 14 16:13:19 wishthinkpad.loc kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    Jun 14 16:13:19 wishthinkpad.loc kernel: pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af:
    Jun 14 16:13:19 wishthinkpad.loc kernel: pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
    Jun 14 16:13:19 wishthinkpad.loc shorewall[199]: Initializing...
    Jun 14 16:13:19 wishthinkpad.loc kernel: excluding 0x130-0x137 0x170-0x177 0x1f0-0x1f7 0x200-0x207 0x220-0x22f 0x370-0x377 0x388-0x38f
    Jun 14 16:13:19 wishthinkpad.loc kernel: excluding
    Jun 14 16:13:19 wishthinkpad.loc kernel: 0x130-0x137 0x170-0x177 0x1f0-0x1f7 0x200-0x207 0x220-0x22f 0x370-0x377 0x388-0x38f 0x3a0-0x3a7
    Jun 14 16:13:19 wishthinkpad.loc kernel: pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
    Jun 14 16:13:19 wishthinkpad.loc kernel:
    Jun 14 16:13:19 wishthinkpad.loc kernel: pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff:
    Jun 14 16:13:19 wishthinkpad.loc kernel: excluding 0x3f0-0x3ff
    Jun 14 16:13:19 wishthinkpad.loc kernel: excluding
    Jun 14 16:13:19 wishthinkpad.loc kernel: 0x3f0-0x3ff 0x4d0-0x4d7
    Jun 14 16:13:19 wishthinkpad.loc kernel: pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff:
    Jun 14 16:13:19 wishthinkpad.loc kernel: clean.
    Jun 14 16:13:19 wishthinkpad.loc kernel: pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7:
    Jun 14 16:13:19 wishthinkpad.loc kernel: clean.
    Jun 14 16:13:19 wishthinkpad.loc kernel: pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff:
    Jun 14 16:13:19 wishthinkpad.loc kernel: excluding 0xc0000-0xcbfff 0xf0000-0xfffff
    Jun 14 16:13:19 wishthinkpad.loc kernel: pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff:
    Jun 14 16:13:19 wishthinkpad.loc kernel:

Maybe you are looking for

  • Cannot open file after updating pages

    Help last night i installed maverick then updated my pages app. After updating all my documents will open apart from one. when i open it says i need latest version which i have. I even deleted the pages program and reinstalled and i still have same p

  • Will Apple restore Artist Grid view in iTunes 11?

    There are thousands of people asking the very same thing. It's extremely easy for Apple to add this view again!

  • Purple lines around an image icon

    Hi all! Ive created some JButtons with a white background which have some ImageIcon's representing their use. Problem is a horrible purple border appears around the most recently selected image/text combination in the middle of the button. I've looke

  • Device Driver stuck in infinite loop

    This propblem maybe only happed 2 times in the frist 6 months of my computer purchase, but the past few months it's been happening more and more untill it happens every day, or just about anytime I play a video game. The exact error message is "The d

  • How to add '%' to a query with bind variables

    Hi, I am using oracle jdeveloper 11g. I am trying to create a table to display rows using the below query in a jspx page, select * from ade_txns where series='WORKPLACE_PT.11.1.1.8.0_GENERIC' and transaction like 'rkumara%' I am using a view with que