Sendmail issue on Solaris 10 system...

I have two systems running Solaris 10 that are having sendmail issues. If mail messages like the one below gets bounced back or if someone replies to it, the message will go to [email protected], and that should not happen. I believe I configured these systems the same way as the others and they seem to be fine. I have reconfigured the sendmail on the problems systems and I am still seeing messages going to [email protected] Below is what our reports should be sending to us and below that is what we should not be sending. How do I fix this problem? Can someone help, please. Thanks.
CORRECT:
-----Original Message-----
From: root@nunode7 [mailto:[email protected]]
Sent: Monday, December 11, 2006 0:04
To: [email protected]
Subject: Daily Security Report
Begin report of failed attempts to 'su' for nunode7 on Sun Dec 10 2006
No failed attempts to report
End report of failed attempts to 'su' for nunode7 on Sun Dec 10 2006
INCORRECT:
-----Original Message-----
From: root@nunode15 [mailto:[email protected]]
Sent: Tuesday, December 12, 2006 0:01
To: [email protected]
Subject: Daily Security Report
Begin report of failed attempts to 'su' for nunode15 on Mon Dec 11 2006
No failed attempts to report
End report of failed attempts to 'su' for nunode15 on Mon Dec 11 2006
---------------------------------------------------------------------

So far it is happening for root. What do you suggest I do to fix it?
Below is an example of what I have been seeing. If you look at "To", you will see where the problem is..."relay" should not be there. The host name should not be there either as the masquerading configuration is set up. Something is causing "relay" to appear and I cant seem to find what it is.
-----Original Message-----
From: [email protected]
Sent: Friday, September 29, 2006 14:59
To: [email protected]
Subject: File Structures on node
Message was edited by:
DCMetroSunAdmin

Similar Messages

  • Sendmail issue on solaris 10

    Hi,
    I am getting the following logs frequently on my solaris 10 server.
    Jun 30 16:52:01 <servername> sendmail[20814]: [ID 801593 mail.info] m5UFq10v020814: from=metron, size=536, class=0, nrcpts=1, msgid=<200806301552.m5UFq10v0208
    14@<servername>.>, relay=metron@localhost
    Jun 30 16:52:01 <servername> sendmail[20814]: [ID 801593 mail.info] m5UFq10v020814: to=metron, ctladdr=metron (104/4), delay=00:00:00, xdelay=00:00:00, mailer
    =relay, pri=30536, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection refused by [127.0.0.1]
    Jun 30 16:54:01 <servername> sendmail[21265]: [ID 801593 mail.info] m5UFs0KJ021265: from=metron, size=536, class=0, nrcpts=1, msgid=<200806301554.m5UFs0KJ0212
    65@<servername>.>, relay=metron@localhost
    Could you please geve me an idea about the issue.
    Thanks in advance.

    So far it is happening for root. What do you suggest I do to fix it?
    Below is an example of what I have been seeing. If you look at "To", you will see where the problem is..."relay" should not be there. The host name should not be there either as the masquerading configuration is set up. Something is causing "relay" to appear and I cant seem to find what it is.
    -----Original Message-----
    From: [email protected]
    Sent: Friday, September 29, 2006 14:59
    To: [email protected]
    Subject: File Structures on node
    Message was edited by:
    DCMetroSunAdmin

  • 11 -- 11,1 Upgrade: pkg://solaris/system/library signature problems?

    Hi all,
    I have a vanilla 11 11/11 lab system (x64, in VirtualBox) that I've tried to upgrade to 11.1:
    # uname -a
    SunOS alpha 5.11 11.0 i86pc i386 i86pc
    # pkg list entire
    NAME (PUBLISHER) VERSION IFO
    entire 0.5.11-0.175.0.0.0.2.0 i--
    # pkg publisher
    PUBLISHER TYPE STATUS URI
    solaris origin online http://pkg.oracle.com/solaris/release/
    It has full connectivity to the Internet, and I've tried pointing it to the public release repo, a local 11.1 repo that has had the update ISO injected into it, and with a single loopback repo pointing to only the upgrade ISO (sol-11_1-upgrade-repo.iso, md5 verified). In all 3 cases I get this at the first stage of the upgrade:
    # pkg update
    Creating Plan |
    pkg update: A signature in pkg://solaris/system/[email protected],5.11-0.175.0.10.1.0.0:20120918T164707Z could not be verified for this reason:
    The signature value did not match the expected value. Res: 0
    The signature's hash is 235c7674d821032ae3eeda280c7837d1f1f4fdb5
    I must be missing something simple, because I can't imagine a bad signature in the public or upgrade-ISO repos. Any ideas?
    Thanks!

    If possible, please file a support request for this issue through the My Oracle Support portal so that the details of the issue can be captured.
    With that said, executing the following commands may provide a viable workaround:
    pkg set-property signature-policy=ignore
    pkg set-publisher --set-property signature-policy=ignore solaris
    Once the above commands have been executed, attempt the pkg update again. If successful, then after rebooting to the new boot environment, reset the properties as follows:
    pkg unset-property signature-policy
    pkg set-publisher --unset-property signature-policy                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Comparing Solaris systems?

    Does anyone have a process that they can recommend for comparing different Solaris systems to look for inconsistencies? We have a 6 node cluster where all 6 nodes should be identical. For now, I want to verify that they have the same patches applied and the same packages installed (including specific versions). I may want to include more as I get further along, but this is the bare minimum to start. I'd also like to be able to have an automated process that can detect changes and alert us as well.
    All systems are Solaris 10 built from the 5/08 OS.
    thanks in advance.

    SAP Suggest to use backup/restore or R3load .
    Yes - because that´s the most uncomplicated way.
    if I want to create a trace file manually and shut down database,sap .
    copy over  data files /origfile/logs from os level to target system and recover the system and install sap.
    There´s no issue with that if you know what you´re doing
    If you don't use sap mentioned procedure  in that case SAP does not provide any support .
    If you have a problem with that copy procedure itself you will be on you own. if the target system is running already you will still get support of course because nobody asks you later, how you did the copy.
    Markus

  • Performance Issue for BI system

    Hello,
    We are facing performance issues for BI System. Its a preproductive system and its performance is degrading badly everyday. I was checking system came to know program buffer hit ratio is increaasing everyday due to high Swaps. So asked to change the parameter abap/buffersize which was 300Mb to 500Mb. But still no major improvement is found in the system.
    There is 16GB Ram available and Server is HP-UX and with Netweaver2004s with Oracle 10.2.0.4.0 installed in it.
    The Main problem is while running a report or creating a query is taking way too long time.
    Kindly help me.

    Hello SIva,
    Thanks for your reply but i have checked ST02 and ST03 and also SM50 and its normal
    we are having 9 dialog processes, 3 Background , 2 Update and 1 spool.
    No one is using the system currently but in ST02 i can see the swaps are in red.
    Buffer                 HitRatio   % Alloc. KB  Freesp. KB   % Free Sp.   Dir. Size  FreeDirEnt   % Free Dir    Swaps    DB Accs
    Nametab (NTAB)                                                                                0
       Table definition     99,60     6.798                                                   20.000                                            29.532    153.221
       Field definition     99,82      31.562        784                 2,61           20.000      6.222          31,11          17.246     41.248
       Short NTAB           99,94     3.625      2.446                81,53          5.000        2.801          56,02             0            2.254
       Initial records      73,95        6.625        998                 16,63          5.000        690             13,80             40.069     49.528
                                                                                    0
    boldprogram                97,66     300.000     1.074                 0,38           75.000     67.177        89,57           219.665    725.703bold
    CUA                    99,75         3.000        875                   36,29          1.500      1.401          93,40            55.277      2.497
    Screen                 99,80         4.297      1.365                 33,35          2.000      1.811          90,55              119         3.214
    Calendar              100,00       488            361                  75,52            200         42              21,00               0            158
    OTR                   100,00         4.096      3.313                  100,00        2.000      2.000          100,00              0
                                                                                    0
    Tables                                                                                0
       Generic Key          99,17    29.297      1.450                  5,23           5.000        350             7,00             2.219      3.085.633
       Single record        99,43    10.000      1.907                  19,41           500         344            68,80              39          467.978
                                                                                    0
    Export/import          82,75     4.096         43                      1,30            2.000        662          33,10            137.208
    Exp./ Imp. SHM         89,83     4.096        438                    13,22         2.000      1.482          74,10               0    
    SAP Memory      Curr.Use %    CurUse[KB]    MaxUse[KB]    In Mem[KB]    OnDisk[KB]    SAPCurCach      HitRatio %
    Roll area               2,22                5.832               22.856             131.072     131.072                   IDs           96,61
    Page area              1,08              2.832                24.144               65.536    196.608              Statement     79,00
    Extended memory     22,90       958.464           1.929.216          4.186.112          0                                         0,00
    Heap memory                                    0                  0                    1.473.767          0                                         0,00
    Call Stati             HitRatio %     ABAP/4 Req      ABAP Fails     DBTotCalls         AvTime[ms]      DBRowsAff.
      Select single     88,59               63.073.369        5.817.659      4.322.263             0                         57.255.710
      Select               72,68               284.080.387          0               13.718.442             0                        32.199.124
      Insert                 0,00                  151.955             5.458             166.159               0                           323.725
      Update               0,00                    378.161           97.884           395.814               0                            486.880
      Delete                 0,00                    389.398          332.619          415.562              0                             244.495
    Edited by: Srikanth Sunkara on May 12, 2011 11:50 AM

  • Authorization issue in BI system.

    Hi,
    Having a authorization issue in BI system.
    user trying to run a query in and attempt to drill down by customer, he gets customer details but some of the customers are missing...
    Does the authorization granted in BI system based on customers? Is it a security issue?
    pls help...
    Thanks...

    Hi,
    Please execute the query with your id(developer id who will be having access to all data) first. Check if you are able to see all the customer data. If you are able to see all the data then the user is restricted with some authorizations. ( usually the authorizations are done on sales organization, company codes, plant..etc.. please check how it is in your project...)
    If you are not able to see all the customer data, then check in the infoprovider on which the query is built and do your analysis.
    Check in the roles assigned to the user.
    Hope it helps.
    Edited by: Maddy on Apr 21, 2011 6:42 AM

  • OK to use fdisk/100% "SOLARIS System" partition for RAID6 Virtual Drive?

    Solaris newb, here - I am configuring an x4270 with 16 135 GB drives. Basic approach is
    D0, D1: RAID 1 (Boot volume, Solaris, Oracle Software)
    D2-D13: RAID 6 (Oracle dB files)
    D14, D15: global spares
    After configuring the RAID's w/WebBIOS Utility, I am now trying to format/partition the RAID 6 Virtual Drive, which shows up as 1.327 TB 'Optimal' in the MegaRAID Storage Manager. After hunting around the ether for advice on how to do this, I came across http://docs.oracle.com/cd/E23824_01/html/821-1459/disksxadd-50.html#disksxadd-54639
    "Creating a Solaris fdisk Partition That Spans the Entire Drive"
    which is painfully simple: after 'format', just do an 'fdisk' and accept the default 100% "SOLARIS System" partition. After doing this, partition>print and prtvtoc show this:
    partition> print
    Current partition table (original):
    Total disk cylinders available: 59125 + 2 (reserved cylinders)
    Part Tag Flag Cylinders Size Blocks
    0 unassigned wm 0 0 (0/0/0) 0
    1 unassigned wm 0 0 (0/0/0) 0
    2 backup wu 0 - 59124 1.33TB (59125/0/0) 2849529375
    3 unassigned wm 0 0 (0/0/0) 0
    4 unassigned wm 0 0 (0/0/0) 0
    5 unassigned wm 0 0 (0/0/0) 0
    6 unassigned wm 0 0 (0/0/0) 0
    7 unassigned wm 0 0 (0/0/0) 0
    8 boot wu 0 - 0 23.53MB (1/0/0) 48195
    9 unassigned wm 0 0 (0/0/0) 0
    # prtvtoc /dev/dsk/c0t1d0s2
    * /dev/dsk/c0t1d0s2 partition map
    * Dimensions:
    * 512 bytes/sector
    * 189 sectors/track
    * 255 tracks/cylinder
    * 48195 sectors/cylinder
    * 59127 cylinders
    * 59125 accessible cylinders
    * Flags:
    * 1: unmountable
    * 10: read-only
    * Unallocated space:
    * First Sector Last
    * Sector Count Sector
    * 48195 2849481180 2849529374
    * First Sector Last
    * Partition Tag Flags Sector Count Sector Mount Directory
    2 5 01 0 2849529375 2849529374
    8 1 01 0 48195 48194
    My question: is there anything inherently wrong with this default partitioning? Database is for OLTP & fairly small (<200 GB), with about 140 GB being LOB images.
    Thanks,
    Barry

    First off, RAID-5 or RAID-6 is fine for database performance unless you have some REALLY strict and REALLY astronomical performance requirements. Requirements that someone with lots of money is willing to pay to meet.
    You're running a single small x86 box with only onboard storage.
    So no, you're not operating in that type of environment.
    Here's what I'd do, based upon a whole lot of experience with Solaris 10 and not so much with Solaris 11, and also assuming this box is going to be around for a good long time as an Oracle DB server:
    1. Don't use SVM for your boot drives. Use the onboard RAID controller to make TWO 2-disk RAID-1 mirrors. Use these for TWO ZFS root pools. Why two? Because if you use live upgrade to patch the OS, you want to create a new boot environment in a separate ZFS pool. If you use live upgrade to create new boot environments in the same ZFS pool, you wind up with a ZFS clone/snapshot hell. If you use two separate root pools, each new boot environment is a pool-to-pool actual copy that gets patched, so there are no ZFS snapshot/clone dependencies between the boot environments. Those snapshot/clone dependencies can cause a lot of problems with full disk drives if you wind up with a string of boot environments, and at best they can be a complete pain in the buttocks to clean up - assuming live upgrade doesn't mess up the clones/snapshots so badly you CAN'T clean them up (yeah, it has been known to do just that...). You do your first install with a ZFS rpool, then create rpool2 on the other mirror. Each time you do an lucreate to create a new boot environment from the current boot environment, create the new boot environment in the rpool that ISN'T the one the current boot environment is located in. That makes for ZERO ZFS dependencies between boot environments (at least in Solaris 10. Although with separate rpools, I don't see how that could change....), and there's no software written that can screw up a dependency that doesn't exist.
    2. Create a third RAID-1 mirror either with the onboard RAID controller or ZFS, Use those two drives for home directories. You do NOT want home directories located on an rpool within a live upgrade boot environment. If you put home directories inside a live upgrade boot environment, 1) that can be a LOT of data that gets copied, 2) if you have to revert back to an old boot environment because the latest OS patches broke something, you'll also revert every user's home directory back.
    3. That leaves you 10 drives for a RAID-6 array for DB data. 8 data and two parity. Perfect. I'd use the onboard RAID controller if it supports RAID-6, otherwise I'd use ZFS and not bother with SVM.
    This also assumes you'd be pretty prompt in replacing any failed disks as there are no global spares. If there would be significant time before you'd even know you had a failed disk (days or weeks), let alone getting them replaced, I'd rethink that. In that case, if there were space I'd probably put home directories in the 10-disk RAID-6 drive, using ZFS to limit how big that ZFS file system could get. Then use the two drives freed up for spares.
    But if you're prompt in recognizing failed drives and getting them replaced, you probably don't need to do that. Although you might want to just for peace of mind if you do have the space in the RAID-6 pool.
    And yes, using four total disks for two OS root ZFS pools seems like overkill. But you'll be happy when four years from now you've had no problems doing OS upgrades when necessary, with minimal downtime needed for patching, and with the ability to revert to a previous OS patch level with a simple "luactivate BENAME; init 6" command.
    If you have two or more of these machines set up like that in a cluster with Oracle data on shared storage you could then do OS patching and upgrades with zero database downtime. Use lucreate to make new boot envs on each cluster member, update each new boot env, then do rolling "luactivate BENAME; init 6" reboots on each server, moving on to the next server after the previous one is back and fully operational after its reboot to a new boot environment.

  • Anyone know when the 'Patch' or 'service pack' will be released for UDS 5?  It doesn't work correctly on Solaris systems.

    When trying to export code from older versions of forte and import the code into UDS 5, the imports don't work correctly on Sun server, Solaris system. Errors in the Windows. Seems to be a common problem, but haven't heard of any patch yet.

    The SP1 for UDS 5 or 5.0.3 will be out in 2-3 weeks. I already have a beta copy of SP1 so I am sure you can request this if you open a case on your problem. I have never ran into the problem you are describing.
    ka

  • Installation of iCS 2.x on a Solaris system in which  X or Open Windows software in not installed

    When I try to run the install wizard for iPlanet Calendar Server 2.x on a
    Solaris system that does not have X-Windows or Open Windows graphical user
    interface, I get the following error:<BR>
    <P>
    Starting install wizard in graphical mode
    ld.so.1: instsupp/bin/java: fatal: libX11.so.4: open failed: No such file or
    directory
    Killed
    setup: The installation failed with errors.
    <P>
    To work around this problem, place a copy of libX11.so.4
    into the /usr/lib
    directory. This will allow
    you to run the Calendar Server 2.x installer in the -nodisplay
    mode. You can find the
    libjava.so in the
    instsupp/lib/sparc/native_threads
    directory under the installation
    program tree.

    I thought that might be the case, so I preemptively expanded the mac partition to fill the entire disk, and retried -- it did not work.  I think, at this point, my best bet might be to reinstall OSX from scratch, enable file-vault, and then repartition and install the other OS's.

  • 3D Solar System problems

    hi,
    I'm trying to simulate a solar system and I have those two problems
    - I can't add a sattelite to a planet (the moon to the earth)
    - I can't make a planet turn on itself (only the central one: the sun)
    Here is my source. Thanks for helping.
    Sorry for the comments in french.
    You can send your answers to [email protected]
    class Espace
    *     Auteur : Leli�vre Antoine                                   *
    *     Fichier : Espace.java                                   *
    *     Fonction: Reconstitution de notre systeme solaire *
    *     Date: 09/02/04                                             *
    import com.sun.j3d.utils.universe.SimpleUniverse;
    import javax.media.j3d.BranchGroup;
    import javax.media.j3d.Transform3D;
    import javax.vecmath.Vector3f;
    import javax.media.j3d.TransformGroup;
    import javax.media.j3d.Canvas3D;
    //import javax.media.j3d.Alpha;
    //import javax.media.j3d.RotationInterpolator;
    import javax.media.j3d.BoundingSphere;
    import javax.vecmath.Point3d;
    import javax.media.j3d.Background;
    import com.sun.j3d.utils.image.TextureLoader;
    //import javax.media.j3d.Texture2D;
    import javax.media.j3d.ImageComponent2D;
    import javax.swing.JFrame;
    public class Espace extends JFrame
         public Espace()
              super("Systeme Solaire...");
              // creation du canvas
              Canvas3D canvas = new Canvas3D(SimpleUniverse.getPreferredConfiguration());
              getContentPane().add("Center",canvas);
              // cr�ation de la sc�ne, regroupement des objets
              BranchGroup scene = createScene();
              scene.compile();
              // cr�ation de l'univers de la scene 3D
              SimpleUniverse univers = new SimpleUniverse(canvas);
              // on met le plan de projection en arriere par rapport � l'origine
              univers.getViewingPlatform().setNominalViewingTransform();
              // on place la sc�ne dans l'univers "univers"
              univers.addBranchGraph(scene);
              //arret du programme lors du clic sur la croix
              setDefaultCloseOperation(EXIT_ON_CLOSE);
         * creation d'un groupement d'objet *
         public BranchGroup createScene()
              // creation du BG principal
              BranchGroup ObjPrinc = new BranchGroup();
              BranchGroup terre = new BranchGroup();
              BranchGroup mars = new BranchGroup();
              BranchGroup saturne = new BranchGroup();
              BranchGroup jupiter = new BranchGroup();
              BranchGroup venus = new BranchGroup();
              BranchGroup mercure = new BranchGroup();
              BranchGroup lune = new BranchGroup();
              BranchGroup uranus = new BranchGroup();
              BranchGroup neptune = new BranchGroup();
              BranchGroup pluton = new BranchGroup();
              TextureLoader loader=new TextureLoader("fond.jpg",this);
              ImageComponent2D image=loader.getImage();
              Background bg=new Background(image);
              bg.setApplicationBounds(new BoundingSphere(new Point3d(0,0,0),150d));
              ObjPrinc.addChild(bg);
              Animation MonAnimation = new Animation();
              //------ Debut Objet Lune-------
              //Planete Lune = new Planete();
              //Transform3D Translation1 = new Transform3D();
              //Translation1.set(new Vector3f(0.05f, 0.0f, 0.0f));
              //TransformGroup TranslateGP1 = new TransformGroup(Translation1);
              //TranslateGP1.addChild(Lune.AjoutPlanete("lune.jpg",0.01f));
              //lune.addChild(TranslateGP1);
              //------ Fin Objet Lune -----
              //------ Debut Objet Terre -------
              Planete Terre = new Planete();
              Planete Lune = new Planete();
              Transform3D Translation = new Transform3D();
              Translation.set(new Vector3f(0.4f, 0.0f, 0.0f));
              TransformGroup TranslateGP = new TransformGroup(Translation);
              TranslateGP.addChild(Terre.AjoutPlanete("earth.jpg",0.03f));
              terre.addChild(TranslateGP);
              //------ Fin Objet Terre -----
              //------ Debut Objet Saturne -------
              Planete Saturne = new Planete();
              Transform3D Translation2 = new Transform3D();
              Translation2.set(new Vector3f(0.9f, 0.0f, 0.2f));
              TransformGroup TranslateGP2 = new TransformGroup(Translation2);
              TranslateGP2.addChild(Saturne.AjoutPlanete("saturne.jpg",0.08f));
              saturne.addChild(TranslateGP2);
              //------ Fin Objet Saturne-----
              //------ Debut Objet Mars -------
              Planete Mars = new Planete();
              Transform3D Translation3 = new Transform3D();
              Translation3.set(new Vector3f(0.5f, 0.0f, 0.0f));
              TransformGroup TranslateGP3 = new TransformGroup(Translation3);
              TranslateGP3.addChild(Mars.AjoutPlanete("mars.jpg",0.02f));
              mars.addChild(TranslateGP3);
              //------ Fin Objet Mars -----
              //------ Debut Objet Jupiter-------
              Planete Jupiter = new Planete();
              Transform3D Translation4 = new Transform3D();
              Translation4.set(new Vector3f(0.7f, 0.0f, 0.0f));
              TransformGroup TranslateGP4 = new TransformGroup(Translation4);
              TranslateGP4.addChild(Jupiter.AjoutPlanete("jupiter.jpg",0.1f));
              jupiter.addChild(TranslateGP4);
              //------ Fin Objet Jupiter -----
              //------ Debut Objet Venus-------
              Planete Venus = new Planete();
              Transform3D Translation5 = new Transform3D();
              Translation5.set(new Vector3f(0.3f, 0.0f, 0.0f));
              TransformGroup TranslateGP5 = new TransformGroup(Translation5);
              TranslateGP5.addChild(Venus.AjoutPlanete("venus.jpg",0.03f));
              venus.addChild(TranslateGP5);
              //------ Fin Objet Venus -----
              //------ Debut Objet Mercure-------
              Planete Mercure = new Planete();
              Transform3D Translation6 = new Transform3D();
              Translation6.set(new Vector3f(0.2f, 0.0f, 0.0f));
              TransformGroup TranslateGP6 = new TransformGroup(Translation6);
              TranslateGP6.addChild(Mercure.AjoutPlanete("mercure.jpg",0.01f));
              mercure.addChild(TranslateGP6);
              //------ Fin Objet Jupiter -----
              //------ Debut Objet Uranus-------
              Planete Uranus = new Planete();
              Transform3D Translation7 = new Transform3D();
              Translation7.set(new Vector3f(1.1f, 0.0f, 0.0f));
              TransformGroup TranslateGP7 = new TransformGroup(Translation7);
              TranslateGP7.addChild(Uranus.AjoutPlanete("uranus.jpg",0.05f));
              uranus.addChild(TranslateGP7);
              //------ Fin Objet Uranus -----
              //------ Debut Objet Neptune-------
              Planete Neptune = new Planete();
              Transform3D Translation8 = new Transform3D();
              Translation8.set(new Vector3f(1.45f, 0.0f, 0.0f));
              TransformGroup TranslateGP8 = new TransformGroup(Translation8);
              TranslateGP8.addChild(Uranus.AjoutPlanete("neptune.jpg",0.05f));
              neptune.addChild(TranslateGP8);
              //------ Fin Objet Neptune -----
              //------ Debut Objet Pluton-------
              Planete Pluton = new Planete();
              Transform3D Translation9 = new Transform3D();
              Translation9.set(new Vector3f(1.7f, 0.0f, 0.0f));
              TransformGroup TranslateGP9 = new TransformGroup(Translation9);
              TranslateGP9.addChild(Uranus.AjoutPlanete("mercure.jpg",0.005f));
              pluton.addChild(TranslateGP9);
              //------ Fin Objet Pluton-----
              //----- d�but objet Soleil -----
              Planete Soleil = new Planete();
              ObjPrinc = MonAnimation.Rotation(ObjPrinc,Soleil.AjoutPlanete("soleil.jpg",0.15f),-1,3000);
              //----- fin 2eme objet
              ObjPrinc = MonAnimation.Rotation(ObjPrinc,terre,-1,10000);
              ObjPrinc = MonAnimation.Rotation(ObjPrinc,saturne,-1,294500);
              ObjPrinc = MonAnimation.Rotation(ObjPrinc,mars,-1,18800);
              ObjPrinc = MonAnimation.Rotation(ObjPrinc,jupiter,-1,118600);
              ObjPrinc = MonAnimation.Rotation(ObjPrinc,venus,-1,6100);
              ObjPrinc = MonAnimation.Rotation(ObjPrinc,mercure,-1,2400);
              ObjPrinc = MonAnimation.Rotation(ObjPrinc,uranus,-1,840000);
              ObjPrinc = MonAnimation.Rotation(ObjPrinc,neptune,-1,1640000);
              ObjPrinc = MonAnimation.Rotation(ObjPrinc,pluton,-1,2470000);
              //am�lioration du processus d'affichage
              ObjPrinc.compile();
              return ObjPrinc;
         public static void main(String[] args)
              Espace MonEspace = new Espace();
              MonEspace.setSize(1024,768);
              MonEspace.setVisible(true);
    class Animation
    *     Auteur : Leli�vre Antoine                                        *
    *     Fichier : Animation.java                              *
    *     Fonction: Animation de la scene                     *
    *     Date     : 14/02/04                                        *
    import com.sun.j3d.utils.geometry.Sphere;
    import javax.media.j3d.BranchGroup;
    //import javax.media.j3d.Transform3D;
    import javax.media.j3d.TransformGroup;
    import javax.media.j3d.Alpha;
    import javax.media.j3d.RotationInterpolator;
    import javax.media.j3d.BoundingSphere;
    public class Animation
         public Animation()
         public BranchGroup Rotation(BranchGroup GroupeObj,Sphere UnePlanete,int NbTour,long tps)
              TransformGroup TG = new TransformGroup();
              //Donner la possibilit� a l'objet de bouger
              TG.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE);
              GroupeObj.addChild(TG);
              // Ajout de la sphere � l'objet charger de l'animation
              TG.addChild(UnePlanete);
              // Configuration du nombre de tour et la vitesse
                        // ici tourne ind�finiment (-1) et prend 60 secondes pour faire un tour
              Alpha alpha = new Alpha(NbTour,tps);
              RotationInterpolator Rotation = new RotationInterpolator(alpha, TG);
              Rotation.setSchedulingBounds(new BoundingSphere());
              GroupeObj.addChild(Rotation);
              return GroupeObj;
         public BranchGroup Rotation(BranchGroup GroupeObj,BranchGroup TG1,int NbTour,long tps)
              TransformGroup TG = new TransformGroup();
              //Donner la possibilit� a l'objet de bouger
              TG.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE);
              GroupeObj.addChild(TG);
              // Ajout de la sphere � l'objet charger de l'animation
              TG.addChild(TG1);
              // Configuration du nombre de tour et la vitesse
                        // ici tourne ind�finiment (-1) et prend 60 secondes pour faire un tour
              Alpha alpha = new Alpha(NbTour,tps);
              RotationInterpolator Rotation = new RotationInterpolator(alpha, TG);
              Rotation.setSchedulingBounds(new BoundingSphere());
              GroupeObj.addChild(Rotation);
              return GroupeObj;
    class Planete
    *     Auteur : Leli�vre Antoine                                   *
    *     Fichier : Planete.java                                   *
    *     Fonction: Ajouter une plan�te                         *
    *     Date     : 09/02/04                                        *
    import com.sun.j3d.utils.geometry.Sphere;
    import com.sun.j3d.utils.image.TextureLoader;
    import javax.media.j3d.Appearance;
    import javax.media.j3d.ColoringAttributes;
    //import javax.media.j3d.ImageComponent;
    import javax.media.j3d.Texture;
    import javax.media.j3d.Texture2D;
    import javax.media.j3d.TextureAttributes;
    import javax.media.j3d.ImageComponent2D;
    import java.awt.Container;
    public class Planete
         public Planete()
         * Cr�ation d'une nouvelle planete     *
         *     Param�tre: Nom du fichier image *
         *               Rayon de la plan�te     *
         * Renvoie     : l'objet Sphere           *
         public Sphere AjoutPlanete(String NomImage,float Rayon)
              Appearance AppTexture = AjoutTexture(NomImage);
              Sphere NouvellePlanete = new Sphere(Rayon,Sphere.GENERATE_TEXTURE_COORDS,35,AppTexture);
              return NouvellePlanete;
         *     Ajout du texture sur la sphere     *
         * Param�tre: Nom du fichier image *
         *     Renvoi : L'objet Appearance     *
         private Appearance AjoutTexture(String NomImage)
              try
                   Appearance Apparence = new Appearance();
                   // chargement d'une image pour texture
                   TextureLoader loader = new TextureLoader(NomImage,new Container());
                   ImageComponent2D image = loader.getImage();
                   // instanciation de l'objet texture
                   Texture2D texture = new Texture2D(Texture.BASE_LEVEL,Texture.RGBA,image.getWidth(),image.getHeight());
                   texture.setImage(0, image);
                   // ajout de la texture � l'apparence
                   Apparence.setTexture(texture);
                   Apparence.setTextureAttributes(new TextureAttributes());
                   return Apparence;
              catch(NullPointerException e1)
                   // Creation d'une texture uni dans le cas ou le fichier image n'exciste pas
                   Appearance Apparence = new Appearance();
                   ColoringAttributes bleu = new ColoringAttributes();
                   bleu.setColor(0.0f,0.0f,0.8f);
                   Apparence.setColoringAttributes(bleu);
                   return Apparence;
    }

    Couple of suggestions:
    1. Get rid of everything else except the earth and moon. You have too much happening at one time to figure out what is wrong.
    2. Re-post the new slimmer version of your code using the [code ] [code ] tags (without the space after the word 'code') so I can read it. See http://forum.java.sun.com/features.jsp#Formatting for more help.
    3. Don't use .jpg files in your example. I don't have those files so I can't compile your code on my machine.
    4. If you are getting any errors, post the entire stack trace.
    fitz

  • Implementation of Posix Thread class in c++ for solaris system

    Hello Everyone,
    Please help me with information regarding how to implement Posix Thread Class in c++ for Solaris 5.8 system.
    if available Please let me know any Open Source Posix Threads C++ built-in library available for Solaris System.
    Thanks in Advance.
    Thanks & Regards,
    Vasu

    Posix threads are available on Solaris, and can be used directly in C or C++ programs. Include the header <pthread.h> to get access to the types, constants, and functions. Compile with the option
    -mt
    on every command line, and link with the options
    -mt -lpthread
    If you want to create a class to provide a different sort of interface to phreads you can do so by building on the <pthread.h> functionality.

  • Our Solar System is not called the "Milky Way."

    This is not a question but a correction to the web site's LabVIEW developer challenge. Under the Solar system challenge they reffered to our solar system as the milky way, the milky way is infact the "GALAXY" in which SOLAR SYSTEM resides.
    josh

    So our star system is called what? Our star is called Sol and the star system is the solar system, right?
    You are correct that the Milky Way is a galaxy, not a star system. (It is also the best candy bar for eating frozen if you ask me
    Bob Young
    Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
    DISTek Integration, Inc. - NI Alliance Member
    mailto:[email protected]

  • Solar System Fly Through?

    Hi all,
    I have Adobe Productiom Premium CS3 and wanting to make this http://www.youtube.com/watch?v=por0oYEBs7k
    Asking for suggestions and tips on how to go about completing this project. I have tried looking for templates, but cannot find any.
    Thank you in advance.
    deakant

    ONe of the better solar system tutorials comes with a few of the books authored byTrish and Chris Meyer. It's a classic example of moving a camera through 3D space using flat circles that are told to orient toward the camera. Take a bit of research on your behalf. Start with the Meyer's blogs on
    http://provideocoalition.com/index.php/cmg_keyframes
    If you are just learning AE, you can invest in the every Meyer book with total confidence.
    bogiesan

  • Solar system menu

    Hi everybody
    Does anybody have an example or where to found a tutorial
    that explain me how to make a menu that simulate a solar system or
    something like that?
    Thank you very much

    Hi,
    there's no complete list.
    but you have the menuUID from every item.
    1. activate "View" (Toolbar) ->System Information
    2. then you see under "Modules" (Toolbar) all MenuUIDs when you move the mouse over it.
    give it a try
    EDIT: sorry Petr - i don't get it why you are always fast
    sorry
    lg David
    Edited by: David Nussböck on Jul 29, 2008 9:19 AM

  • Unable to go back more 7 days in solaris systems

    I have noticed that in new solaris systems running Sun OS 5.9, I am unable to go back more than 7 days using the timezone shift. However this is possible in older systems running Sun OS 5.9. Is there an easy solution in newer systems to go back more than 7 days? Thanks in advance

    You probably be better off describing why you want to do this. What it is your trying to achieve.
    That way we might be able to suggest some method other than tweaking the timezone.

Maybe you are looking for

  • HP DV6 2030 SD recovery failure

    Hello I have a nearly three year old HP DV6 2030 SD and for several reasons I wanted to reinstall all software. Directly after buying (december 2009)  I made the three rescue DVD's and a system recovery DVD, and just to check, I then reinstalled the

  • Chapter layout font

    Hello! Is it possible to change the font used to print "Chapter layout" in PDF? If not, is it possible to remove "Chapter layout" from Printed documentation? Thank You Célia Freitas

  • In icloud, do photos pushed to other devices if i open photo stream after i take the photo??

    do photos taken before activating photo stream pushed to other devices??

  • Removing Phantom assemblies from Demand (Ord Res/ Dep Req) & CO24

    Issue 1) I have the issue that I want to maintain Phantom Assemblies with sp procurement key 50 but I want the components in the Phantom assemblies to show as Ord Res / dep req directly to the Top level item and not to his Phantom? Is there any way o

  • Missing messages icon from bridge

    In my ongoing quest to get the Blackberry Bridge and Browser working without paying for a Tethering plan, I did a bridge connection to a second Verizon 9650 BB.  The first one works great except for the Bridge Browser, but I believe that is because m