Sendmail not using aliases.db file

I am using Sendmail 8.13.7. I just installed solaris 10 on a new sun server. I have created an /etc/aliases file. I have performed a "newaliases."
The aliases are not working. I get "User unknown." I have verified that aliases.db is there and that there are no errors upon creation. I have double/triple checked for spelling issues, etc. Sendmail simply is ignoring the aliases.
Any thoughts? Any extra info one may need in order to help out? Thanks!

The alias file location should be /etc/mail/aliases not /etc/aliases
Normally /etc/aliases is a symlink to it, but its possible that its become a separate file..
So check if your edits have shown up in /etc/mail/aliases

Similar Messages

How do I turn off background ni file activity when not using Labview? files such as nimxs.exe, nipalsm.exe, nipalsm.exe, nisvcloc.exe, nicitdl5.exe

How do I turn off background ni file activity when not using Labview? I use labview rarely, and I also use my computer for demanding multimedia applications, including multitrack digital audio recording. I need to reduce as much background activity as possible, and taking a look with task manager I see files such as nimxs.exe, nipalsm.exe, nipalsm.exe, nisvcloc.exe, and nicitdl5.exe running even when I haven't used Labview (8 I believe). These files run even after I right click the NI icon on the lower right and turn off the application. I would like the computer to boot up without these files, and for the necessary files to be activated only when I start the program.
Can this be done or do I have to remove labview from the system to improve performance?
Thanks

Hello, those processes are part of running NI services that start when Windows boots. These processes serve varied purposes and stopping them can have undefined and unknown consiquences for your NI products. These products run at "normal" priority meaning that they should be preempted by any process running at a higher priority which I would expect your other application to be doing given their time sensitivity. That being said, in Windows XP (I can't speak for other OSes), you can lower their priorities even greater through task manager (right click the process»set priority) to further remove them from contention for resources. If you want to prevent them from running you can set the service startup type to "manual" in Control Panel»Administrative Tools»Services. Right click the process go to Properties and Under the General tab choose Startup Type»Manual. This will start up the processes only when something directly starts it up. LabVIEW will start these processes up as it attempts to use them. When you shut down LabVIEW you will need to manually shut down these processes through task manager. Again, doing this can cause problems with your NI products on your system and it is not advised.
Travis M
LabVIEW R&D
National Instruments

Not Using Index on File Server When Accessing User Files Directly on Server

It appears to me that on a server with an indexed network share (Desktop Experience and Search Indexing roles/features installed), if you access the share directly on the server using its drive path, you can search the folders using the index, which
is much faster and supports finding words inside of the files in seconds). However, if you access the same shared folder via its network path from the server itself, the server ignores the index. I have this experience/problem across all shared folders on
the Windows 2012 R2 Server. Details and my most specific goal follows.
In addition to a laptop, I frequently work directly on a Windows Server 2012 R2 computer. We have Redirected Folders set up on DFS (for failover redundancy) so that my Documents folder is in:
\\network\redirections\user\documents. This all works fine on Windows 7 and 8 client computers connected to the network via Offline Files.
The problem is on the server itself. The server has Desktop Experience enabled and Windows Search is installed. If I navigate manually through the DFS root folder to my documents folder, I can search and it properly uses the index. This proves the location
is properly indexed. However, if I access the folders through the official "Documents" folder from the Folder Redirection (a network share pointing to the same server computer I'm working on), it performs an un-indexed search (slow and ignores file
contents, but does find files eventually if the search term is in their filename). Is there a way to force the server to use the indexed search on the Redirected Folders (my Documents folder in particular) when working on that server when logged in locally
on that server?
I suspect a workaround would be to go into the Registry and manually change the HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders to point to the local DFS folder instead of the network share name, but at least one problem
with this is then if I save files with links to other files (e.g., a linked Excel table in a PowerPoint, a mail merge to Access database in Word, etc.) on the server computer, those links will point to d:\DFSroot\... (a physical drive on the computer) instead
of \\network\redirections\user\... (a universally accessible network path) and so none of the other computers will be able to find the linked files, defeating one of the
major benefits of using Redirected Folders.
I can't believe that I need to choose between indexed searching and proper path names in saved files. Surely there is a way to use an indexed search on the server itself?
If you need any more info to help me troubleshoot, please let me know.
Thanks for any help,
Colin

Hi Colin,
It seems that we can not use indexed search on DFS shares. Windows Search works well when users directly access the server. That is, the server is not made available through Distributed File System (DFS).
For more detailed information, you could refer to the links below:
Windows Search Service, Clustered File Services, DFS, Win7 Libraries
https://social.technet.microsoft.com/Forums/windowsserver/en-US/31ac4c16-948b-4ca4-b18f-3a339cdfd5b9/windows-search-service-clustered-file-services-dfs-win7-libraries?forum=winserverfiles
Windows Browse and Organize Features
https://technet.microsoft.com/en-us/library/dd744693(WS.10).aspx
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

HT4796 i have successfully migrated the music but it just shows up in my files and has not updated my iTunes library which is still getting the music from iCloud and is not using the migrated files. Any ideas?

I have successfully used windows migration software to move my music library from a PC to my MacBook Air.
However the music files are just stored in my file system and have not updated my itunes files. Itunes is still getting the music down from icloud instead of using the music files.
Any ideas?

If you're using Windows Movie Maker and HP Photo to build slide shows, this is not an iPod touch issue (nor an iTunes issue), so I'd suggest you take up the problem on a web site that deals with Movie Maker or HP Photo issues. It's really not something we can help with in this forum.
If you're building this slide show on your iPod, please post back and tell us what app(s) you're trying to use, and whether the iPod app on your iPod touch shows and plays your songs correctly. Knowing the specific model of iPod you have and the version of iOS it's running will probably also help.
Regards.

VS2013 Page Inspector does not use external script files

If I use an external javascript file, the Page Inspector does not appear to run the javascript (as the styles created during runtime are not visible). If I run the web page outside of VS (e.g. IE) then it works.
<script type="text/javascript" src="border.js"></script>
However, if I use an internal script, the styles are created as expected.
<script type="text/javascript">$("div").css("border", "2px solid red").add("p").css("background", "yellow");</script>
Is the Page Inspector supposed to use external script files, and if not, are there plans to support it?

Hi,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because Page Inspector feature is more related to ASP.NET Application/Technology, in order to resolve your issue better,
I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/ for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Merge to Panorama in Photoshop not using edited RAW files

When I had LR4, I could Edit in > Merge to Panorama in PS and it would take the edited RAW files and merge them. Now in LR5 it seems to be taking the unedited RAW files and making the panorama. Is there a setting or something I'm missing in LR5?

Yes it is that simple. Just do a google search for Lightroom and Photoshop preference file locations and you should find them. The next time you start the programs, they will rebuild them. Of course, you'll have to re-enter any custom preference settings you've used. Good luck. Of course, when you think you've located them. Just rename them and move them into another folder first. That way, if you've picked the wrong file, you can easily move it back. Once things are working, you can just delete them.
BTW, this is a good troubleshooting tool for any mac applications that are acting wonky. Just delete that preference file, and more often than not, the problem will be fixed.

Weblogic12c and JDK 7 together not using login configuration file properly

Hello,
Little puzzled by this.
I ve installed JDK 7 along with Weblogic 12c and made a custom installation of Weblogic to use JDK 7 as the Local JDK
as mentioned in this doc
http://docs.oracle.com/cd/E24329_01/doc.1211/e24492/jdk7.htm
The JAVA_HOME is pointing to JDK 7
When i configure the login.config.url.1 under JAVA_HOME/jre/lib/security/java.security file to use our own specific file which is used for authentication against LDAP,
deploy the app and try to login, authentication fails(LoginException is thrown), like as if it s not understanding this file or the path or similar.
When i configure the same to use the JDK 6 that comes along with Weblogic 12c, everything is fine.....
Not sure where the problem lies.
Is there any other setting i need to do?
Any help is greatly appreciated.
The Exception thrown is
javax.security.auth.login.LoginException: java.util.MissingResourceException: Can't find resource for bundle sun.security.util.AuthResour
ces, key username: at java.util.ResourceBundle.getObject(ResourceBundle.java:393)
at java.util.ResourceBundle.getString(ResourceBundle.java:353)
at ........
Edited by: 902337 on Jan 6, 2012 11:08 AM

Just adding here that if i install JDK 6 outside of weblogic 12 and point to it, that also works fine.
The problem seems to be weblogic 12 pointing to JDK 7 only ...

Doc/metadata search not using TREX - max files to search?

Hi,
We are creating WebDynPros searching a CM repository for documents with certain values on metadata properties. I know this is kind of "brute force" instead of using TREX classification.
Is there some way of saying how many documents in a folder structure can be searched in 2 seconds? Say we are using dual 2.8GHz CPU and 8 GB RAM in the server. Using KMC6.0.9.0.0.
I am also interested in knowing more about TREX APIs. I see they have not provided an official API - is there an unofficial with some guides?
All feedback is appreciated.
Message was edited by: Bjorn Bjornstad

Hi Bjorn,
> Is there some way of saying how many documents in a
> folder structure can be searched in 2 seconds?
Mainly, this will depend on your DB. I would suggest just to measure some information retrieval, that's done quite fast and will return far more exact values than any estimation.
> knowing more about TREX APIs. I see they have not
> provided an official API - is there an unofficial with
> some guides?
There is no offical nor any unofficial - as far as I know - API doc for direct TREX access. But what is documented is the indirect access via KM API, see for example https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/kmc/using the km indexmanagement apis for searching with trex.article
Hope it helps
Detlev

Root mail not using aliases

I have set up /etc/aliases which is a link to /etc/mail/aliases with the following alias:
root: <my-email-address>
I then ran newaliases successfully
when I run /usr/lib/sendmail -bv root
I get a successful translation
However when I send mail to root I don't get the mail. Mail does work on this server as I am able to send mail to <my-email-address> directly. Any ideas why I can't get root to send its mail to my email address? Thanks to all

I agree this can be annoying. But sometimes it's difficult to fix because it could be on the Server end vs a Keychain issue. You could go to Keychain and do a few things.
1) First, in Keychain, make sure your Keychain password is correct.
2) Close Mail. Delete the Keychain item associated with your mail password for the account you're having trouble with.
3) Open Mail, you'll be prompted for your passwork: select to save in Keychain
Keychain is Located in .../Applications/Utilities/Keychain Access. Below is an example of the Keychain

Libreoffice in KDE does not use KDE file dialogs

Hello,
I have libreoffice-4.2.4-1 from [extra] installed, together with libreoffice-kde4 4.2.4-1. But it still shows the GTK file open/save dialog instead of the KDE one.
I tried starting libreoffice with the following command that I got from the wiki:
SAL_USE_VCLPLUGIN=kde4 lowriter
But that does not change anything. I guess, the autodetection of libreoffice works well, and it is already using the QT style even without the SAL_USE_VCLPLUGIN variable set. It is just not using the right file dialogs. There is a setting libreoffice options (Tools--> Options --> General --> Use Libreoffice dialogs), but it is unchecked.
I checked the forums about this, but the only thing I could find were some threads about a bug with Libreoffice crashing on start. I experienced that bug too, and it seems to be gone now. Unfortunately, I find the missing KDE file dialogs even more annoying.

For me OOO_FORCE_DESKTOP=kde4 does not solve the problem either.
About arojas' link: Do I understand this correctly, that they disabled the KDE file dialog because it is possible that the application crashes in certain conditions due to some QT component? And they hardcoded that, so you cannot reactivate it using some option?

[svn:fx-trunk] 16929: Add a [Mixin] class that will register the required class aliases in the event the mxml compiler generation   [RemoteClass(alias="")] code is not called because an application does not use the Flex UI framework .

Revision: 16929
Revision: 16929
Author:   [email protected]
Date:     2010-07-15 07:38:44 -0700 (Thu, 15 Jul 2010)
Log Message:
Add a class that will register the required class aliases in the event the mxml compiler generation [RemoteClass(alias="")] code is not called because an application does not use the Flex UI framework.
Add a reference to this class in the RPCClasses file so it always gets loaded.
QE notes: Need a remoting and messaging regression test that doesn't use Flex UI.
Bugs: Watson bug 2638788
Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/RPCClasses.as
Added Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/utils/RpcClassAliasInitializer.as

Great exercise to document the problem like this. It got me thinking about how an app with modules would be different from an app that does not use modules. Solution: I moved the dummy reference of PersonPhotoView out to the main application file (as opposed to being inside the module) and it worked. I've probably been lucky not to have experienced this problem earlier, because for most other entities I have an instance attached to my model which is linked / compiled with the main application.

File upload sendmail not displaying user input

Hello ive set up the upload example from http://livedocs.adobe.com/coldfusion/8/htmldocs/help.html?content=Images_01.html
i added a textarea field and a sendmail function. all is working well but the email does not contain any of the data from the fields on the form that the user submits. its just white space where that data should be.....Could someone please check this code and see what i am doing wrong ...thanks, kevin
---------------------------Here is the form page:---------------------------------
<cfparam name="FORM.image" default="" />
<cfparam name="FORM.comments" default="" />

<cfset strError = "">

<cfform action="makeThumbnail.cfm" method="post" enctype="multipart/form-data">
Please upload an image:
<cfinput type="file" name="image" required="yes" id="image" value="#Trim(FORM.image)#" message="Please enter an image!">


<cftextarea name="Comments" cols="20" rows="4" required="yes" id="Comments" message="Please enter your Comments!" enabled="no" value="#Trim(FORM.comments)#" maxlenght="160" visable="no" /> 

<cfinput type="submit" value="Send Image" name="Submit">

<cfif IsDefined( "FORM.image" )>
<cfif IsDefined( "FORM.comments" )>
<cfmail
from="[email protected]"
to="[email protected]"
subject="Visitor Email."
server="outgoing server"
username="usernam"
password="pass">
 File uploaded.
 <cfoutput> image: #Trim(FORM.image)#, comments: #Trim(FORM.comments)#, #Now()#</cfoutput>
</cfmail>
 </cfif>
</cfif>
</cfform>
-----------this is the makethumbnail.cfm which i made no changes ---------------------
<cfset thisDir = expandPath(".")>

<cfif structKeyExists(form,"image") and len(trim(form.image))>
 
 <cffile action="upload" fileField="image" destination="#thisDir#" result="fileUpload"
 nameconflict="overwrite">
 
 <cfif fileUpload.fileWasSaved>
 
 <cfif IsImageFile("#fileUpload.serverfile#")>
 
 <cfimage action="read" source="#fileUpload.serverfile#" name="myImage">
 
 <cfif ImageGetHeight(myImage) gt 480 or ImageGetWidth(myImage) gt 360>
 
 <cffile action="delete"
 file="#fileUpload.serverDirectory#/#fileUpload.serverFile#">
 <cfoutput>
 
 The image you uploaded was too large. It must be less than 480 pixels wide
 and 360 pixels high. Your image was #imageGetWidth(myImage)# pixels wide
 and #imageGetHeight(myImage)# pixels high.
 
 </cfoutput>
 
 <cfelse>
 <cfset ImageScaleToFit(myImage,100,100,"bilinear")>
 
 <cfset newImageName = fileUpload.serverDirectory & "/" &
 fileUpload.serverFilename & "_thumbnail." &
 fileUpload.serverFileExt>
 
 <cfimage source="#myImage#" action="write"
 destination="#newImageName#" overwrite="yes">
 <cfoutput>
 
 Thank you for uploading the image. We have created a thumbnail for
 your picture.
 
 
 
 <img src="#getFileFromPath(newImageName)#">
 
 </cfoutput>
 </cfif>
 
 <cfelse>
 <cffile action="delete"
 file="#fileUpload.serverDirectory#/#fileUpload.serverFile#">
 <cfoutput>
 
 The file you uploaded, #fileUpload.clientFile#, was not a valid image.
 
 </cfoutput>
 </cfif>
 </cfif>
</cfif>

Hello ive set up the upload example from http://livedocs.adobe.com/coldfusion/8/htmldocs/help.html?content=Images_01.html
i added a textarea field and a sendmail function. all is working well but the email does not contain any of the data from the fields on the form that the user submits. its just white space where that data should be.....Could someone please check this code and see what i am doing wrong ...thanks, kevin
---------------------------Here is the form page:---------------------------------
<cfparam name="FORM.image" default="" />
<cfparam name="FORM.comments" default="" />

<cfset strError = "">

<cfform action="makeThumbnail.cfm" method="post" enctype="multipart/form-data">
Please upload an image:
<cfinput type="file" name="image" required="yes" id="image" value="#Trim(FORM.image)#" message="Please enter an image!">


<cftextarea name="Comments" cols="20" rows="4" required="yes" id="Comments" message="Please enter your Comments!" enabled="no" value="#Trim(FORM.comments)#" maxlenght="160" visable="no" /> 

<cfinput type="submit" value="Send Image" name="Submit">

<cfif IsDefined( "FORM.image" )>
<cfif IsDefined( "FORM.comments" )>
<cfmail
from="[email protected]"
to="[email protected]"
subject="Visitor Email."
server="outgoing server"
username="usernam"
password="pass">
 File uploaded.
 <cfoutput> image: #Trim(FORM.image)#, comments: #Trim(FORM.comments)#, #Now()#</cfoutput>
</cfmail>
 </cfif>
</cfif>
</cfform>
-----------this is the makethumbnail.cfm which i made no changes ---------------------
<cfset thisDir = expandPath(".")>

<cfif structKeyExists(form,"image") and len(trim(form.image))>
 
 <cffile action="upload" fileField="image" destination="#thisDir#" result="fileUpload"
 nameconflict="overwrite">
 
 <cfif fileUpload.fileWasSaved>
 
 <cfif IsImageFile("#fileUpload.serverfile#")>
 
 <cfimage action="read" source="#fileUpload.serverfile#" name="myImage">
 
 <cfif ImageGetHeight(myImage) gt 480 or ImageGetWidth(myImage) gt 360>
 
 <cffile action="delete"
 file="#fileUpload.serverDirectory#/#fileUpload.serverFile#">
 <cfoutput>
 
 The image you uploaded was too large. It must be less than 480 pixels wide
 and 360 pixels high. Your image was #imageGetWidth(myImage)# pixels wide
 and #imageGetHeight(myImage)# pixels high.
 
 </cfoutput>
 
 <cfelse>
 <cfset ImageScaleToFit(myImage,100,100,"bilinear")>
 
 <cfset newImageName = fileUpload.serverDirectory & "/" &
 fileUpload.serverFilename & "_thumbnail." &
 fileUpload.serverFileExt>
 
 <cfimage source="#myImage#" action="write"
 destination="#newImageName#" overwrite="yes">
 <cfoutput>
 
 Thank you for uploading the image. We have created a thumbnail for
 your picture.
 
 
 
 <img src="#getFileFromPath(newImageName)#">
 
 </cfoutput>
 </cfif>
 
 <cfelse>
 <cffile action="delete"
 file="#fileUpload.serverDirectory#/#fileUpload.serverFile#">
 <cfoutput>
 
 The file you uploaded, #fileUpload.clientFile#, was not a valid image.
 
 </cfoutput>
 </cfif>
 </cfif>
</cfif>

Unable to load project after delete some path with files but not used at all

Im using the demo of Premiere Pro CC last demo download today.
All the fuc**ng day editing some videos, and saved, then I deleted som efolder containing some video files (almost not used) then when I try to open premiere the project I were working, premiere opens, load and freezes and nothing happens, it keeps on the main area withouht any windows, and I cant get my 10 hours of work What happening with thei premiere ? And Im unable to open the project in Premiere CC 7.0 from another computer as saif it was done using new version.
I NEED A SOLUTION !
Or never never more use premiere

I NEED A SOLUTION !
Don't do this mid stream in EDIT
... I deleted som efolder containing some video files (almost not used)...
TRY - Go to you Back Up project file or an Auto save and hope that recovers some of your work afterrestoring what you deleted.

My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any

My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years

answered in your other thread LR 4 suddenly no longer recognizes files.

Cant open PDF files..It says the adobe acrobat reader that is running can not be used to view files in a browser..plz suggest the solution.thanks

Whenever i try to open a PDF file it says " The adobe/acrobar reader that is running can not be used to view files in a web browser. Plz exit adobe/acrobat readerand exit your web browser and try again." Wt do i need to do, plz suggest.
Regards
Aditya Bhargava

Hi adityabhargava01-
My first suggestion is to upgrade to the most recent version of Firefox by going to this link:
http://www.mozilla.org/en-US/firefox/new/
My second suggestion is to read this article on how to many your preferences on how Firefox deals with PDFs and all other file types:
[[Options window - Applications panel]]
I hope that helps!

Sendmail not using aliases.db file

Similar Messages

Maybe you are looking for