Sennheiser earphone jack will not fit into iPad Air with protective case on

i have sennheiser earphones and the jack will not fit into my iPad Air with the protective leather case on. The earphone jack is too large. Does anyone know if there is some kind of adaptor I can attach to the jack so it will fit? Or perhaps know of another solution?

See here
http://www.ebay.com/sch/items/?_nkw=large+to+small+headphone+adaptor&_sacat=&_ex _kw=&_mPrRngCbx=1&_udlo=&_udhi=&_sop=12&_fpos=&_fspt=1&_sadis=&LH_CAds=

Similar Messages

Lightning adapter will not fit to iPhone 5S with apple case on the phone

I recently purchased the lightning adapter for my iPhone 5S and the adapter does not insert properly when the Apple leather case is fitted to the phone, surely Apple do not expect one to remove the case to use the adapter?

Yeah, it doesn't look like much, but I'm leaving in the player dock and you can't see it when it's plugged in. Better than taking case on/off all the time. I didn't wanna cut my case because I don't think there'll be enough of it left to hold together very long. Good luck with yours! I wish ape would have just included a little extension stub with their adapter.

The second Earphone jack will not work. My DV6000 is only one month old.

The second Earphone jack will not work, but I get static when I plug my earphones into it. The other jack works ok. I need help in fixing it. My DV6000 is only one month old.
This question was solved.
View Solution.

HI,
Robert96 wrote:
The second Earphone jack will not work, but I get static when I plug my earphones into it. The other jack works ok. I need help in fixing it. My DV6000 is only one month old.
One of the jacks is for audio in and the other is for audio out. Some select versions have an S/PD/F jack. Chances are the reason you are getting static is that if you plug an earphone into a microphone jack it will attempt to behave as a microphone. It will not operate properly.
So..a recap. There is only one earphone jack
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Safari for Windows will not log into IIS sites with Windows Authentication

Safari for Windows will not log into IIS sites with Windows Authentication enabled. The IIS log has thousands of login attempts from Safari that result in 401 errors.
I disable Windows Authentication on IIS and it works fine. The problem with that is that my Windows clients stop working properly with seemless logins when I disable this.
The expected behavior is that Safari will work with basic authentication when NTLM does not work. That would result in a password prompt followed by a successful login instead of Safari stopping at "Loading" while hammering the IIS logs.
It does this on all machines that I have tried.
Any ideas or is this a bug?

I noticed that as well. I have to wonder if it's due to not making note of the the different end of line characters between Mac OS X and Windows in code.

App Store will not load on iPad air 2

my App Store will not load on iPad air 2. It's just a blank white screen

Hello, Pofolksx4.
Thank you for visiting Apple Support Communities.
I would need clarification on what the exact issue you are experiencing with the App Store to provide a better answer. However, here are some troubleshooting steps that will help.
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update(iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Can't connect to the iTunes Store
http://support.apple.com/en-us/HT201400
Cheers,
Jason H.

Downloaded a book from itunes, works on iphone6, but will not open on ipad air. "not formatted correctly ". Any ideas ?

Downloaded a book from itunes, works on iphone6, but will not open on ipad air. "not formatted correctly ". Any ideas ?

Hello colinOxford0917,
I'm sorry to hear you are having these issues with iBooks on your devices. If you continue to have issues opening the book in question on your iPad Air due to a format error, you may want to try deleting the copy on your iPad, then redownloading it directly to your iPad from the iBook Store. You may find the information and steps outlined in the following articles helpful:
Frequently asked questions about iBooks - Apple Support
iBooks: Tips for managing your iBooks library and storage on iOS devices - Apple Support
Regards,
- Brenden

My headphones will not fit into my macbook air

Yesterday they fit perfectly with no problems, I have been using the same or similar pairs since i got the laptop. But today, they just will not go into the jack. It is not the headphones, they work just fine on my iPod and other devices. So it is a problem with the laptops jack. Anybody have a suggestion?

I went and checked, there was a headphone jack thingy (part of headphones that goes into computer) inside that had broken off from my brother using it. I got it out though by putting super glue on the tip of a de-fuzzed quetip. And stuck the broken piece to it, it was successful, and no glue got left in the port. Thanks for the help.

IMac will not charge/sync iPad Air - power icon oscillates between charging/not charging

Brand new iMac 27" Retina
Connecting an iPad Air (about a year old) to charge/sync/backup.
After the lightning connector is attached to the iPad Air and I reply "OK" to "Trust this computer", the charging indicator in the upper right oscillates between the running on battery indicator and the green charging indicator rapidly/constantly about 1/2 second between changes.
If I run iTunes, the device appears/disappears in the left menu/device list at the same rate.
I cannot charge the iPad when connected to the iMac (not a big deal, can use external charger), but cannot access with iTunes for sync or backup either.
Have tried cold booting both the iPad and the iMac, but that doesn't help.
Running OX X Yosemite and iOS 8.1.1

Hey rspiv,
The reason you are not getting a consistent charge on you iPad when it is connected to your iMac may be due to not being plugged into a high-powered USB port. As far as making sure that it stays connected to your iMac so you can sync with iTunes, try a different port as well as seeing if you can enable Wi-Fi syncing if it stays connected long enough. Take a look at the articles below for more information and troubleshooting options.
Charge the battery in your iPad
http://support.apple.com/en-us/HT202032
iOS: Device not recognized in iTunes for OS X
http://support.apple.com/en-us/TS1591
Sync your iPhone, iPad and iPod touch with iTunes using Wi-Fi
http://support.apple.com/en-us/HT203075
Take care,
-Norm G.

My zagg keyboard will not connect to iPad Air even though it has been working fine

My Zagg keyboard will not connect with my iPad Air even though it has been working fine for weeks. Bluetooth and keyboard are on and keyboard is connected to iPad.

Hey Leelll,
Thanks for using Apple Support Communities.
It sounds like you are having trouble using a bluetooth keyboard with your iPad. If it is paired to a second iPad that may be an issue.
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Have a nice day,
Mario

Black ink cartridge will not fit into assigned slot.

I cannot insert new black ink (564) into original black in spot (564 setup)on the left side of ink carriage, because new cartridge is wider than original. I already inserted a 564XL black ink into the black ink slot on the far right side of carriage. Printer would not work with only one black cartridge, so I bought a 2nd 564 Black ink cartridge to install on far left side of cartridge (but it won't fit).

Thanks for the model number and additional information.
The cartridge on the far left is called Photo Cartridge. You need to install a replacement photo cartridge in that slot. See the document below to understand the difference between the black and photo cartridges:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01839024
The two cartridges have different label icons on the packaging and on the cartridge. This will help you identify the correct cartridge in the store.
Alternately, please visit the link below to order the photo cartridge online:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02944025
If you are in United States, click on the link for HP Home and Home Office Store. Choose the option 'HP 564 Photo Original Ink Cartridge'.
Say thanks by clicking the Thumbs up icon in the post
Please mark reply as "Accept as Solution" if it solved the problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP

Headphone Jack does not fit into my new Sansa Clip +

Hi, I just bought a new Sansa Clip + so I could listen to my songs while on vacation, but when I put in my headphones 3.5 jack plug into the hole on the side of the mp3 player it won't go all the way in and falls out if I dont hold it properly. Is that how a Sansa Clip + is ? because I found it very annoying. I hope that someone can reply fast because I will be on vacation in about a week. And sorry for my english because it is not my native language.

When the player is new the jack is very tight, and it takes a bit of force to get the plug in completely.

Core i7 920 WILL NOT FIT into X58 pro-e

Hi guys, sorry for the n00b post
I'm trying to install a core i7 920 into an MSI x58 pro-e. for some reason, the CPU won't fit inside the housing, the hinge won't close all the way. I installed it the only way it's able to go in; by aligning the 2 grooves
It seems like the "fins" at the side of the CPU bracket that rest on the top of the processor are what's keeping it elevated. I can't figure out the problem here. It looks like it's set correctly and I have it perfectly aligned, but I can't close the CPU bar more than halfway. I don't want to put any pressure on it because I don't want to bend the board's pins.
Any help here would be great.

Quote
I don't want to put any pressure on it
You will neet to apply a little pressure, otherwise you won't be able to close the lid.
If you really can't do it on your own, please ask in a computer shop for help.

IOS 6.1 will not load into ipad

Cannot download iOS 6.1. Get an error message about three fourths of the way through.

Is the firmware in the router up to date?
See here for the latest for v2.2: http://homesupport.cisco.com/en-us/support/routers/WRT54G
Note: All these ideas are a bit lame since you say that some iPhone 5s are connecting OK and they running the same iOS level 6.1 and, i think, have the same Broadcom WiFi chip BCM4334.
All devices are running iOS 6.1 right not 6.0.1, or 6.0.2?
You might want to try your iPad mini on some other WiFi networks to see how it fares there.

I have an older ipod classic that is a 40gb & the usb cable will not fit into my usb port to my new computer, can i get a different one that will work?

CAN SOMEONE PLEASE HELP ME OUT WITH THIS IMMEDIATELY???

That font color is almost unreadable, please use another.
Your iPod Classic almost certainly is not USB, but FireWire
USB
FireWire
I know this because the USB (type A) socket has not changed since it came out and early iPods were FireWire, not USB>

Javascript items will not load into my website with Safari

I have a website that uploaded fine with Safari, www.onefineparty.com. Lately the site does not show the javascript photos, only white boxes. The javascript uploads fine with Firefox on Macs and with non-Safari browsers on PCs.
We have 2 macs that have this problem: MacBookPro and IMac G5.
Both have OSX 10.4.11, with Safari 3.1.2 (4525.22)
Both have Javascript enabled.
Do I need to tell my potential clients to turn off Safari and use another web browser to view my website?

http://www.onefineparty.com/fadertool.asp
It holds the answer to your troubles. Safari Inspector show two major errors in the code.

Sennheiser earphone jack will not fit into iPad Air with protective case on

Similar Messages

Maybe you are looking for