Sensor de proximidade

atualizei meu iphone 4 para o ios 7.0.3 e o sensor de proximidade parou de funcionar como faço para ele voltar a funcionar? ja tentei restaurar ja

Google Translation:
Good evening, I wanted to know how to do to activate a pump with a moisture sensor that I have done myself with two spades (nails) measuring soil resistivity and function of the resistivity and the volts, if the soil is dry then activate the pump and if it is wet because the pump stops and also have a width of hysteresis. Also add a chart to see the evolution of the field. I use the DAQ 6009.
question: what type of a voltage signal and level do you need to activate the pump? can you post the specifications/model number....

Similar Messages

Sensor de Proximidade 4S

O seguinte, quando estou em uma ligação e encosto o aperelho no rosto ele desliga a tela, até ai normal, só que o problema e que quando afasto o aparelho do rosto ele volta como se o brilho estivesse no minimo e pra voltar ao normal tenho que encostar no sensor novamente dai ele volta com o brilho que estava.

Google Translation:
Good evening, I wanted to know how to do to activate a pump with a moisture sensor that I have done myself with two spades (nails) measuring soil resistivity and function of the resistivity and the volts, if the soil is dry then activate the pump and if it is wet because the pump stops and also have a width of hysteresis. Also add a chart to see the evolution of the field. I use the DAQ 6009.
question: what type of a voltage signal and level do you need to activate the pump? can you post the specifications/model number....

No funciona al sensor de proximidad

AL acercar el iphone no se apaga la pantalla y se apretan los botones con la cara

Seguro que le has removido la película protectora adherida a la pantalla en la fabrica?

El visor de mi cámara sony 7R dejó de funcionar, qué puedo hacer?

POR FAVOR ALGUIEN QUE ME PUEDA INDICAR SOBRE EL TEMA, EL VISOR DE MI CAMARA SONY 7R DEJO DE FUNCIONAR DE UN MOMENTO A OTRO, QUÉ PUEDO HACER?

Buen día gerzoncochea,
Gracias por su mensaje. A partir de la información que a proporcionado, si su modelo de cámara es el ILCE-7R, esta unidad posee la capacidad para ayudar a reducir el consumo de batería, de activar el visor electrónico hasta que el sensor ocular (también conocido como sensor de proximidad) detecta una presencia. Por lo tanto, cuando se mira a través del visor, el sensor ocular detecta su presencia y activa automáticamente el visor electrónico, si este no se activa le sugerimos intentar restablecer la unidad a ajustes de fabrica:
MENU
Ajustes (Setup)
Ajuste para restaurar [Setting Reset]
Ajustes de restablecimiento de cámara [Camera Settings Reset]
Si el problema persiste contacte a nuestro centro de servicio mas cercano a su localidad para verificar la garantía y opciones de reparación. Para mayor información visite el siguiente enlace:
http://www.sony-latin.com/corporate/SOLA/servicioysoporte/servicio.html
Si te fue útil esta solución, favor dar clic al botón que dice ''Aceptar como Solución''.

Sensor Mapping Express VI's performance degrades over time

I was attempting to do a 3d visualization of some sensor data. I made a model and managed to use it with the 3d Picture Tool Sensor Mapping Express VI. Initially, it appeared to work flawlessly and I began to augment the scene with further objects to enhance the user experience. Unfortunately, I believe I am doing something wrong at this stage. When I add the sensor map object to the other objects, something like a memory leak occurs. I begin to encounter performance degradation almost immediately.
I am not sure how I should add to best add in the Sensor Map Object reference to the scene as an object. Normally, I establish these child relationships first, before doing anything to the objects, beyond creating, moving, and anchoring them. Since the Sensor Map output reference is only available AFTER the express vi run. My compromise solution, presently, is to have a case statement of controlled by the"First Call" constant. So far, performace seems to be much better.
Does anyone have a better solution? Am I even handling these objects the way the community does it?
EDIT: Included the vi and the stl files.
Message Edited by Sean-user on 10-28-2009 04:12 PM
Message Edited by Sean-user on 10-28-2009 04:12 PM
Message Edited by Sean-user on 10-28-2009 04:16 PM
Solved!
Go to Solution.
Attachments:
test for forum.vi ‏105 KB
chamber.zip ‏97 KB

I agree with Hunter, your current solution is simple and effective, and I can't really visualize a much better way to accomplish the same task.
Just as a side-note, the easiest and simplest way to force execution order is to use the error terminals on the functions and VIs in your block diagram. Here'a VI snippet with an example of that based on the VI you posted. (If you paste the image into your block diagram, you can make edits to the code)
Since you expressed some interest in documentation related to 3D picture controls, I did some searching and found a few articles you might be interested in. There's nothing terribly complex, but these should be a good starting point. The first link is a URL to the search thread, so you can get an idea of where/what I'm searching.You'll get more hits if you search from ni.com rather than ni.com/support.
http://search.ni.com/nisearch/app/main/p/q/3d%20picture/
Creating a 3D Scene with the 3D Picture Control
Configuring a 3D Scene Window
Using the 3D Picture Control 'Create Height Field VI' to convert a 2D image into a 3D textured heigh...
Using Lighting and Fog Effects in 3d Picture Control
3D Picture Control - Create a Moving Texture Using a Series of Images
Changing Set Rotation and Background of 3D Picture Control
Caleb Harris
National Instruments | Mechanical Engineer | http://www.ni.com/support

Ajuda com logica de sensores

Boa tarde,
Sou leigo em Labview, estou precisando fazer um projeto onde tenho 2 sensores, quan o 1 for atuado comecar a contar o tempo e so parar qnd o 2 atuar, ai com o tempo eu calcular a velocidade e aceleração.
ate agora eu ja montei o circuito dos sensores, fiz uma logica no labview tb, nao como eu queria... a minha funciona da seguinte maneira, qnd eu aciono o sensor ele começa a contar o tempo, mais qnd desaciona ele para a contagem... ele so deveria parar qnd o sensor 2 fosse acionado.
Em anexo segue o que fiz, espero que alguem posso me ajudar, estou bem perdido com o Labview.
Estou usando um arduino UNO e o toolkit para fazer o programa.
qq coisa meu e-mail: [email protected]
Att.
Rafael
Anexos:
2 sensor 26-4-13.vi ‏17 KB

Rafael,
Você enviou apenas a VI principal. Ficaram faltando algumas sub-VIs. Mesmo assim, pelo que pude entender o acionamento do sensor 1 é sempre antes do sensor 2. Assim, aconselho a fazer uma máquina de estado sequencial simples com as seguintes etapas:
Inicialização: valores, comunicação serial, etc.
Espera acionamento do sensor 1
Guarda momento do acionamento do sensor 1
Espera acionamento do sensor 2
Guarda momento do acionamento do sensor 2
Calcula e apresenta tempo decorrido
Encerramento: fechar comunicação serial, etc.
Se você não sabe como montar uma máquina de estado simples pode simplificar mais ainda colocando cada passo em um quadro (frame) de um Flat Sequence.
André Manzolli
Engenheiro Mecânico
Certified LabVIEW Developer - CLD
LabVIEW Champion

Usb 6009:connecting the sensor and motor

Hi there,
I am new to the labview also the usb-6009. I want to know if I can connect my sensor to the device. The output of the sensor is either analog voltage, pulse width or serial.If I want to use the AN pin, can I just connect the wire to the ADC from the usb or I need to add some circuit before connect it to the usb?also, if I want to control the brushless dc motor with the driver, can I just connect the wire from the motor driver direct to the device? How to connect it?
Thanks

You can connect analog voltages directly to the USB-6009 to be measured as long as they do not exceed the input limits (-10V to +10V).
Connecting the motor directly to the outputs is a bad idea.
Digital output is 0-5V, 8.5mA
Analog output is 0-5V, 5mA
So unless your motor draws less than 5mA (extremely unlikely) you'll blow up your DAQ!
You will need to buffer the outputs somehow unless you are just driving logic gates.
It's all on the datasheet... http://www.ni.com/pdf/products/us/20043762301101dlr.pdf
Message Edited by Troy K on 06-06-2008 02:36 PM
Troy
CLDEach snowflake in an avalanche pleads not guilty. - Stanislaw J. Lec
I haven't failed, I've found 10,000 ways that don't work - Thomas Edison
Beware of the man who won't be bothered with details. - William Feather
The greatest of faults is to be conscious of none. - Thomas Carlyle

IPhone 5 proximity sensor not working! (iOS 6.0.1)

iPhone 5 proximity sensor not working! (iOS 6.0.1)
When I call , the screen is not locked(

Remove any screen protectors and cases, does the problem continue?

Iphone 6 home button sensor not working

I just got the iphone 6 in the mail and I've been having trouble setting up the fingerprint lock and reachability option. My home button sensor doesn't seem to work. I had my thumb over the fingerprint sensor for 5 minutes and it didn't read at all.. the screen remained idle. I tried everything. (I let my thumb sit over the button for minutes without moving, covered the ring, and even tried pressing down out of aggravation). And when I turned on the accessibility option for reachability. I double tapped my home button and nothing happened. Is my phone defected or am I doing something wrong?

Hi,
I had the same problem and after many hours of work was confirmed to be a hardware problem (according to the Apple technical support).
I have sent it back.
Did you ever resolve your issue?

My proximity sensor does not work on my iPhone 4

My proximity sensor does not work on my iPhone 4

Well, it can be fixed, however it is in a very difficult spot, and it may cost me more to replace than what I can get out of it. I don't care to pay for a replacement since my warranty is up, because I already have an iPhone 5. I want to sell the iPhone4, and not for $75 either because you can't make a phone call unless its on speaker. I didn't know what other people had to say, so I just wanted some feedback on my options. I'm sorry that I am not an expert on the iPhone hardware componets, because I actually work for a living. I don't have time to sit here and play on forums. Thanks for all you're help.

Windows 7 Pro x64 does not detect HP Mobile Data Protection Sensor (accelerometer)

Hello there.
I installed win7pro x64 yesterday and already came across a serious problem that makes my way of using the notebook a bit dangerous for my precious data.
When I was working on HP-branded Vista 32bit (from recovery partition etc), there was a device called HP Mobile Data Protection Sensor together with HP ProtectSmart (or Protect Smart) software. In other words, the HDD accelerometer that parks HDD's heads when it "feels" it's falling or something, and software for it. It worked brilliantly.
Until I decided to install Win7... Then, surprisingly after a driver-install failure and taking a look at the Device Manager I noticed that there's no such device! I checked it three times, looked at every device's property, even reinstalled Vista 32bit back - it showed again - and installed Win7 - not detected again. There's nothing that has Device ID's HPQ004! I remember people saying that after fresh Windows install, there were 6 unknown devices or more. I had only 5. [Fingerprint device, 3x MemCard reader and IR receiver]. There was no accelerometer... Also, when I try to install the drivers/software, the windows pops up:
ProtectSmart Hard Drive Protection: with text Property.AccelerometerNotPresent
and then another one saying something like Features were not installed because of installation error or unsupported feature.
So now I'm stuck with a notebook that is unsafe to travel with, because the disk is no longer protected
I already installed all the drivers available from HP page, even downloaded newest ones from Intel (chipset) etc.
Is there a solution to this? Has anyone else encountered this problem?
Windows 7 is officially out and available as RTM version, not beta, so I think HP should open support for it and release new drivers for win7! And most importantly, fix this issue ...
This question was solved.
View Solution.

Well, thanks to myself, I fixed it. After some thinking I remembered that ACPI = BIOS-related. It appears that there is a problem with the newest (F16) BIOS.
F.16 changelog is below:
Version: F.16 A (26 May 2009) Fixes
Updates the Intel MRC Code to version 2.7.
Updates the Intel AHCI OP ROM to version iSrc 1.20_E.0012 11252008.
Updates the BIOS to support Microsoft Windows Vista Operating Systems with Service Pack 2 (SP2).
I went back to version F.14 and... boom! New (unknown) device found And guess what, it's ACPI/HPQ0004... So now my HDD is protected again ^^ yay!
I don't know which of these changes cause that, but it looks that that can be fixed.
I'll go back to F.16 again to see if the device will disappear and then contact HP support on that case.
EDIT: Well, F.16 breaks things again, so it's definetely a BIOS problem. Thanks for... umm... well... at least spread the word, guys I hope this helps if someone has the same problem.
Message Edited by dark_skeleton on 08-22-2009 07:08 AM
Message Edited by dark_skeleton on 08-22-2009 07:11 AM

IPad touch-screen sensor the does not work on one part of displey

I have problem with a part of the screen on my iPad. It seems like the sensor on the screen does not work. When draging items or webpages through that section, the dragging stops. It looks like the screen is not detecting my fingers on that part. Part of the screen that is not working is about 1 cm wide. iPad is 1 month old.
Message was edited by: micronola

Had the same issue with a 1cm strip from top to bottom (portrait) not responding. I did a backup, a complete factory reset, and then a restore of the backup. So far it seems to be working again!!

Sensor does not work after hitting tablet Z

What to do? fell at an angle plate - stopped working sensor. Case-warranty and repair costs money unreal. Someone tell me - what can I do?

The first thing I would do is to do a factory reset and/or reinstall the software with SUS or PCC, but I don't quite understand which sensor you are referring to, if you meant to say the Digitizer/touchscreen then you will have to either pay Sony or buy the piece online and install it yourself
Update Service (SUS)
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

GPU 0 Die Temp Sensor ERROR on a MacBook Pro. Can anybody help?

Hello.
My wife has a 15-inch, 2.4GHz MacBook Pro model 3.1 laptop.
All of sudden the screen started to flicker, and after that, it could no longer be booted. Applelogo visible but the timewheel stops and nothing happens.
I managed to get hold of a copy of ASD (Apple Service Diagnostic) for her computer, and I found out what was wrong:
There is a test called "Temp Sensor - GPU 0 Die Temp" that fails. I get the following message:
"Temp sensor GPU 0 Die Temp test 1 - Sensor Reads Within Operating Range
- Check to ensure that sensor reads within operating range.
ERROR - Unable to read sensor
- TEST FAILED -
Temp sensor GPU 0 Die Temp test 8 - Sensor Noise Test
- Checks that sensor Noise is within spec.
ERROR - Unable to read sensor
- TEST FAILED -"
If I look in the "Hardware Profile" under "sensor" I find the following:
"Sensor
type:            Temperature
location:            TG0D
low-limit:            15
high-limit:        85
reading:            1.0
description:        GPU 0 Heatsink Temp
noise-tolerance:    1.0"
The thing is that the problem seems to be intermittent. It comes and goes. All of a sudden the test passes and I can boot the computer. Some days the computer can work for a whole day, so it doesn´t seem to be related to temperature.
What do you guys and girls think? Is this fixable by myself? Does anybody know where this sensor is located? Maybe it´s just a bad connection, since it´s intermittent?
I feel I have come a little bit on the way to be able to solve this issue, and it would feel like a failure to be forced to leave the computer at an Apple Service Center, if it´s even worth it to do that. There is a risk that the computer is not worth a repair.
Could someone please chime in here for a clever advice?
Thanks.
Bo Reimer.

Welcome Bo!
It may be related to a known problem with MBPs 3,1 and 4,1. Some had a bad Nvidea Geforce 8600M GT video chipset that could fail under high heat cpnditions. There is an Apple Repair Extension Program (REP) that will fix the defect at no charge for up to four years from date of purchase:
http://support.apple.com/kb/TS2377
You'll need to have an Apple retail store or an authorized service provider check the computer with a special test gadget for positive ID of the problem to qualify. If it does, you get a new logic board. Reported turnaround for the fix is from same day to three days.
If their test does not turn up the Nvideo curse, you still have an affordable repair option if you live in North America (It would he helpful if you fill in the "Geographic Information" field in your profile--at this point I'm having to assume you're in N. America)).
The option is a depot repair. Apple sends your computer to their central refurbishment facility and bascially fixes anything outside of cosmetic damage for a flat fee of about US$315--much cheaper that a new computer. Taxes and shipping may apply.
People who have used this option are reporting excellent results and a turnaround of about one business week.

Remote Sensor not working HP h8-1260t

My computer works fine to watch TV on Windows Media Center using an over the air antenna. But the Remote sensor does not seem to be working. I have the remote sensor plugged into the IR IN spot. When I press any of the remote control buttons, nothing happens. There is not even a light on the remote sensor indicating that it has detected any signal. The Device Manager shows a functional "Microsoft eHome Infrared Transceiver" in the Human Interface Devices section. I have tried to update the drivers, but it states no update needed. I uninstalled and re-installed the drivers as well without any luck. Any advice appreciated.

Hello again Jbschwart,
Thank you for the quick feedback on the status of your issue. Have you tried a Clean Boot yet? I am providing you with an Microsoft Support document: How to perform a clean boot in Windows, which will guide you through the process. As well another thing to try is to follow the steps set out in the HP Support document: Using Microsoft System Restore (Windows 7), which will guild you through the process of restoring your computer back to a point in time where the IR worked.
My last thought on this would be to try the HP Support document: Backing Up Your Files (Windows 7) to back your personal files up and then use the HP Support document: Performing an HP System Recovery (Windows 7) to recover your computer back to factory.
As the recovery back to factory will replace ALL the software if the issue persists then it is a hardware issue and I think it would be best if you contact HP Technical Support for repair options.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Sensor de proximidade

Similar Messages

Maybe you are looking for