Sensor Health is showing Red

Hi,
Could anyone tell me why vs0 is showing red?
Overall Health Status                                   Green
Health Status for Failed Applications                   Green
Health Status for Signature Updates                     Green
Health Status for License Key Expiration                Green
Health Status for Running in Bypass Mode                Green
Health Status for Interfaces Being Down                 Green
Health Status for the Inspection Load                   Green
Health Status for the Time Since Last Event Retrieval   Green
Health Status for the Number of Missed Packets          Green
Health Status for the Memory Usage                      Not Enabled
Health Status for Global Correlation                    Not Enabled
Health Status for Network Participation                 Not Enabled
Security Status for Virtual Sensor vs0   Red
Thanks,

Hi Tariq,
Someone else can correct me if I'm wrong but I believe that this means you had a high severity event trigger in the last 5 minutes. You should check your events on the sensor when this happens to see what was triggered. The condition should clear on it's own provided you don't have a steady stream of high severity alerts coming in.
Jon.

Similar Messages

Why PSA data show red status when opened but green on PSA page?

Run RSA1 -> click PSA to open PSA page, locate one infosource and find the PSA under it, find the status column shows it's green, but when opening it, find the 1st column shows red for each row. How does the inconsitance occur?
BTW, if we open the infopackage monitor for the above one, find a weird thing is that each request get two consecutive processes running with a circle of red ball and green ball in the left frame. Double click one of them, in the right frame and click the monitor Status tab, the msg window is as following (in between two dashed lines below):
Incorrect data records - error requests (total status GREEN)
Diagnosis
Data records were recognized as incorrect.
System response
The valid records were updated in the data target and can be used in reporting.
The incorrect records were not written to the data target, but were posted retractively under a new request number in the PSA.
Procedure
Check the data in the error requests, correct the errors, and post the error requests.
Sounds like the data failed to uploaded to data target due to error in PSA, but why the status show green in somewhere? And if clicking the Details tab, all show green! Weird!
Thanks

Hi Kevin,
In your InfoPackage Update tab, click the Error Handling button. It seems that the Valid records update, request green option is chosen. This is why you see the green request and some error records.
This means that the corect reocrds were loaded and are available for reporting, but the incorrect ones were left behind. This is used to check the erro records separatelt so that they do not disrupt the entire data load.
Hope this helps...

Solution Manager - EarlyWatch Alert shows red flag for managed system.

Hi Guys,
I tried to fix EarlyWatch alert report for Managed systems of QA and Dev which showed red flag on SolMan in DSWP. While trying to generate BACK RFC Destination to SolMan for QA and Dev, it messed up the EarlyWatch alert reports of Prod which was successfully working upto this point. And now the red flag appears for Prod system on SolMan in DSWP instead of two bottle sign.
As for why Dev and QA did not work, I found out it was NONE internal RFC popped whenever I tried to choose the RFC to connect to SolMan while Prod which was working fine before always showed BACK rfc. That's why I tried to fix BACK rfc for Dev and QA.
Please help me to fix these EWA problems.
Thanks,
Modena

Hi Modena,
Please see the link below for this specific issue:
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=228262728

Report in BEx Analyzer shows Red "X" in records field

Dear Experts.
Report in BEx Analyzer us showing red "X" in the records field. Although there are figures in the field and is getting calculated in the overall result, but still the numbers donot appear.
Kindly advise how to fix this.

Please detail the KF formulae here..
Any value divided by 0 is not defined.
So if formula if its using division , you must use not div by 0 function. i.e.NDIV0 function
Edited by: SKDDON on Oct 13, 2009 10:13 AM

Snapshot agent showing red mark in replication monitor!!!(Merge replication)

few days before snapshot agent showing red mark in replication monitor without any changes...
synchronizing from publisher to subscribe working fine...
and how to clean up snapshot agent job history...
plz give me a solution...
Thanks in advance.......

error:
The replication agent has not logged a progress message in 5 minutes. This might indicate an unresponsive agent or high system activity. Verify that records are being replicated to the destination and that connections to the Subscriber, Publisher, and Distributor
are still active.
snapshot agent showing red mark...
Hi Baraiya Kirit,
According to the error message, the issue could be caused by that the agent is busy or the agent cannot log in to one of the computers in the topology.
To troubleshoot this issue, please perform the following steps. For more details, please review this article:
MSSQL_ENG020554.
• If the agent has stopped, please restart it and check if the error still occurs.
• If this error is raised frequently because the agent is busy:
You might need to redesign your application so that the agent spends less time processing.
You can increase the interval at which agent status is checked using the Job Properties dialog box.
• If an agent cannot log in to one of the computers in the topology:
We recommend that the -LoginTimeOut value be set lower than the interval at which the replication agent checkup job runs.
There is also a similar blog for your reference.
http://maginaumova.com/the-replication-agent-has-not-logged-a-progress-message-in-10-minutes/
Thanks,
Lydia Zhang

How to bind the user-defined watch to a specific server so that server's Health would show green ball and is linked to Monitoring watch?

Hi,
I create a user defined watch for BI4.1 ExplorerExplorationServer server in CMC -> Monitoring.
Caution:
node.ExplorerExplorationServer$'Server Running State'==1 ||
node.ExplorerExplorationServer$'Server Running State'==2 ||
node.ExplorerExplorationServer$'Server Running State'==4 ||
node.ExplorerExplorationServer$'Server Running State'==6 ||
node.ExplorerExplorationServer$'Server Running State'==7 ||
node.ExplorerExplorationServer$'Health State'==1
Danger:
node.ExplorerExplorationServer$'Server Running State'==0 ||
node.ExplorerExplorationServer$'Server Running State'==5 ||
node.ExplorerExplorationServer$'Health State'==0
However, in CMC -> Servers -> Explorer Services, the ExplorerExplorationServer shows "Information is not available" blue ball in Health.
How do I bind the user-defined watch to a specific server so that server's Health would show green ball and is linked to Monitoring watch?
Regards,
Jin-Chong

Hello JinChong,
We had created User-defined Explorer watches on our environments and have run into issues.
Have received many false alerts even though Explorer servers are running fine.
After creating an AGS case it was informed to us that Explorer does not have monitoring capabilities.
AGS is checking with solution architect of Explorer application about when the monitoring watches for explorer would be included.
Regards,
Rohit

FILE TO IDOC SCENARIO-Receiver Business system ECC showing Red

HI
     In File-idoc scenario Business system showing red status in RWB .And i have given the role for the business system as application server and configure related integrated server . But the error in a RWB for the ping and self-test is as follows
     Unable to log on to system buss_ecc_200 in language en with user PIRWBUSER .
I thing from XI side every thing is ok. But for bussiness system side ECC might miss some configuration .
       could any help in this issue:
regards..

Hi
Please try one of the followings:
1) In Configuration --> Business service --> Service --> Adapter specific identifiers. Give logical system name for the sender system (e.g XI_00_800)
2) In Design --> mapping objects. Give all information of sender n receiver in EDIDC40 segment and
   In configuration --> receiver communication channel in that enable the checkbox take sender from payload.
3) In configuration --> Receiver Agreement --> Header mapping --> Sender Service (Give XI1 i.e ur sender system).
Also check the RFC destination that is the major problem with idoc...

Business Process Engine is showing Red Led in RWB

Hello to All, I installed PI7.1 and after client copy - Business Process Engine is showing Red Led in RWB.
When I click on BPE, the message at bottom of screen (in Yellow Status) indicates " Schedule background job for clearing report". Please let me know if any one has the solution with details.
I gone thru the link in SDN, but no resolution yet.
Re: Business Process Engine is showing Red Led in RWB
thanks, Srini

Hi Mark, All the nodes are green under "Maintain Runtime Environment" and "Maintain Definition Environment".
In RWB, component monitoring --> Display -- Business process engine is RED with message as
"Schedule background job for clearing report" in Yellow.
I looked under batch jobs "SWWCLEAR" and it is already ran successfully.
Please let me know how can i make BPE green.
thanks, Srini
Edited by: Srinivas Chatrati on Apr 20, 2009 11:51 PM

Monitor issue - PC completed but monitor shows red

We have implemented Support Pack. For one of the data load - Process chain has completed and data loaded to cube but process chain log still shows red. Please help.
Thanks,
Mohammed

Hi,
If you feel that this issue is happened due to support pack implementation then all of your process chains available in system should have monitor status as RED.
But if you are facing issue with particular load then check the process log and job log in SM37. There might be some issues in current load, try to repeate the load and see how it works?
Regards,
Durgesh.

My ipod is always showing red light even it gets fully charged can u pls suggest me a solution

my ipod is showing red light even it gets fully charged

okay I've sorta of fixed it. I don't know it just started to get recognized by the computer but I still ahve a problem. My iPod shows the apple logo and it's lit up and it's NOT GOING AWAY NO MATTER WHAT. Someone help me please.
I've like tried EVERYTHING.

Shuffle light shows red when it should show green.

Shuffle light shows red when it should show green. For example, when it's fully charged, the light shows red instead of showing green. When you play a song, the light blink in red too.

Are you sure the 2nd gen shuffle you have is a REAL Apple shuffle and NOT a
FAKE?
LED colors and functions are an indication it a FAKE...

BPE in RWB is showing Red LED.

Hello Experts,
In RWB --> Component Monitoring --> Display -- Business process engine is showing RED LED.The message
"Schedule background job for clearing report" is in Yellow.
In transaction swf_xi_customizing all the nodes are green under "Maintain Runtime Environment" and "Maintain Definition Environment".
I cannot change the "Schedule background job for clearing report". It gives message "Customizing Already Carried Out"
Please help.
Thanks in advance,
Regards,
Suraj

Hi Suraj,
Is this hindering the execution of your BPM. I dont think it should create any problems. I have often seen the adapter engine and integration engine showing Red LED but that does not hinder the execution of messages.
Regards,
Sarvesh

Images showing red blue spot and they are not crisp at all - Canon EOS 600 D

Hello,
About a month ago i bougth Canon EOS 600 D with 18-55 mm and 55-250mm lens and everything goes fine i capture moon images and wildlife pictures as well.
But, now i'm facing some problem with it.
Recently i was trying to capture images with my Canon EOS 600 D and suddenly i noticed that the images are not sharp at all and the images show red and blue spot. I don't know what to do i'm just an ammature in this.
Please any one can help me with this problem.
Canon EOS 600D & EOS 5d Mark iii
Best DSLR's to make Images Real !
Apple News
Solved!
Go to Solution.

If you're taking shots of just the moon then the exposure value won't change all that much day to day. I recommend shooting in full manual, use the same settings that you used that gave you images you liked as a baseline. Low iso, nice middle aperture, and adjust shutter speed to fine tune the exposure. The next day you start at the same settings and adjust the shutter speed slightly if needed to account for a change in brightness. Good luck, have fun.

Audio jack showing red light indicator

audio jack was showing red light when i was installing windows first time via boot camp ... !

Try System Preferences>Flash>Advanced tab>Delete All...
My wife's 2011 mbp had the same problem:
no sound from speakers,
sound okay in headphones,
red light on in jack,
slow computer.
She plays MANY different FLASH online games in Firefox. I searched everywhere and found the same advice as you all did ref toothpick in headphone jack, etc. Nothing worked.
Today, I googled "firefox" "problem" and "sound". I found "Troubleshoot issues with plugins like Flash or Java to fix common Firefox problems". I stopped reading at this point and decided to check out the status of her Flash settings. I opened System Preferences > Flash and explored the different tabs and options on my mbp compared to hers and noticed a LOT more "websites" in her Storage and Camera & Mic tabs. I went to her Advanced tab and selected Delete All... . It took over a minute to clear all her "websites". I did a reboot and was shocked, surprised, relieved that her mbp speakers were spewing sounds again! Problem solved! Her computer is now faster as well.
Short story:
System Preferences>Flash>Advanced tab>Delete All...
Hope it works for you, too.

Workflow shows red errors on recipients for all the email steps

I have 3 email steps in my list workflow
created in SPD
When I click the "Check for Errors", all my
recipients show red with * surrounding them.
I made sure I have outgoing email set in central admin.
What can the problem be?
I can’t publish like that.
Ofer Gal

The first email step one I used the picker to select the “Legal team” which is a SharePoint group in my site collection.
The second I used the picker to select the Current Item:Created By
The third is the same.
I assume my problem is because I do not have profile service running and SharePoint has no way to get email address for the users.
What I don’t understand is why there is nothing that will show me what the problem is.
Ofer Gal

Sensor Health is showing Red

Similar Messages

Maybe you are looking for