Sensor Not Activating?

I just bought the sensor for the iPod Touch 2nd Gen, and when I open up the app, it won't pick the signals from the sensor? It will stay at the screen where it says to walk to activate sensor. I do not know if the sensor is on or not, or I have to walk a bit more for it to activate.
Please Help, I am considering a return

I have a major issue. i have used my touch for many walks. i also have 3 sensors and receivers and figured the touch would better b/c no matter what shoes i pick up i can sync the touch to that sensor. for some reason it wont link and tells me it sees one there but just keeps searching. I've restored twice. one hard restore and then just restore from the iTunes screen. i have also reset my settings from the touch itself and it still wont link it. any suggestions before i actually contact apple for support. i have 1, 2 and 3 gen nanos so i know about the nike+ and all the little glitches but to restore and it still wont link up I'm lost. it also didn't delete my current runs. anytime i've had to restore my nano's it always deletes my works out. funny thing on my 3rd gen is it has history but no current saved workouts. that's something that's never been fixed and i have a new nano b/c previous one would just lock up. they are great products but when there issues it's sometimes not easy getting it fixed and we're 2 hours from the closet Apple store.
for now I'm off to put my other shoes with sensors in the dryer and see if the touch will pick up my 3rd sensor. if anyone has other suggestions or things to try that i haven't i'm all ears. : )
thanks
mispeedy!

Similar Messages

Sudden Motion Sensor not active

Hello,
My new MacBook's SMS is inactive:
    Machine Name: MacBook
    Machine Model: MacBook1,1
    CPU Type: Intel Core Duo
    Number Of Cores: 2
    CPU Speed: 2 GHz
    L2 Cache (shared): 2 MB
    Memory: 1.25 GB
    Bus Speed: 667 MHz
    Boot ROM Version: MB11.005F.B00
    SMC Version: 1.4f8
    Sudden Motion Sensor:
            State: Disabled
But pmset says:
    $ sudo pmset -g
        Active Profiles:
        Battery Power -1*
        AC Power -1
        Currently in use:
         sms 1
         hibernatefile /var/vm/sleepimage
         acwake 0
         sleep 10
         autorestart 0
         halfdim 1
         hibernatemode 3
         disksleep 10
         displaysleep 3
         lidwake 1
         lessbright 1
I resetted the PMU and the PRAM but the SMS remains inactive.
Is it a hardware problem or a software one?
Thanks,
Gilles.
MacBook Mac OS X (10.4.6)

Have you notice whether or not the motion sensor
works?
Apparently not (tested with iAlertU for example and with the software from http://www.kernelthread.com/software/ams/ams.html).
Yeah I'd probably take juhs10's advice and give Apple
a call if it's not working. It's a strange
occurrence. I would assume it's a software problem
but I'm not familiar enough with it to say for sure.
Thank you, I'll call Apple tomorrow to see with them.
Thank you for your help,
Gilles.

TS1702 Nike + iPod sensor not activating on my iPhone 5

Have been trying to get my Nike + iPod to work and all it keeps saying is "activating sensor" what do i do

i waited for 24 hours... no luck! the network that i am using is problematic i guess... with another network tht i tried, facetime gets activated in a jiffy!

Nike sensor not logging distance

The last two times I've gone for a run (this morning and a couple of days ago) the sensor has activated with no problem and logged my time, but not my distance or how many calories I've burned. I thought maybe the runs would stay logged in my history, but after a few minutes they disappeared as well. I tried to sync to my Nike+ account to see if the distance/calories showed up online, but it doesn't even show up. However, it does show my last run on my iTunes.
I've seen that other people have had similar issues, but none of them seem to have been resolved. I have Nike+ shoes, so it's not a matter of the sensor moving around. I haven't used my Nike+ sensor since August of last year, so I don't know if that is the issue.

May be the sensor battery drained? Try this: Start a run with the sensor and as you run check if the pace updates. If it is not updating it could probably be low battery on the sensor.
I had similar issue and after replacing sensor it worked fine for me.

My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs?

My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs? My apple ID is my Yahoo mail it self, but not able to log in to Icloud, Can any body guide, Why, I can not.

Hi dip_kinu,
I apologize, I'm a bit unclear on exactly what device you are trying to set up and what is happening when you try to do so. If you are having issues remembering your Apple ID, or feel like you may have set up multiple Apple ID's, you may find the following page helpful:
Apple - My Apple ID: Find your Apple ID
https://iforgot.apple.com/appleid
Regards,
- Brenden

In Adobe Bridge when I try to open my camera raws, I get a pop up box stating "Bridges parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature" What do I do? Please advise

In Adobe Bridge, when I try to open my camera raws, I get a pop up stating"Bridges parent application is not active. Bridge requires that a qualifying product has been launced at least once to enable this feature." What the heck? I have a PC and haven't had problems before.. I have adobe cloud and pay my monthly bill...

Have you opened Photoshop or any other Adobe app that Bridge works with? You need to do this if you've upgraded PS or just signed up for CC.

Error: "Component is not active" but component is active

Hi Experts,
I transported a Web Dynpro application from source system to target system. When starting the application via browser I'm getting this error message:
"Component XXX_BDB is not active"
But the component is active in source and in target system. When I try to activate the component in target system there comes this error:
Component XXX_BDB can't be generated because of errors: see long text.
(Message no. SWDP_WB_TOOL100)
According to the long text, there is a heavy error and I should check the component in order to eliminate the errors. Checking the syntax is OK and strangely, the component controller is also active. But when I want to start WebDynpro-Component, the error message "Component is not active" is displayed.
I have checked this thread [Problems when activating ComponentController |Problems when activating ComponentController; without any effect....
Does someone have any ideas?
Thanks in advance,
Tan

Hi Thomas,
where can I check the generation load limit?
I've done an extended syntax check (in source system, is that okay or should I do the check on both systems?), there are some errors regarding strings, field properties and structure extensions and some warnings regarding field properties.
But this errors are on an other wd component as well, but this other component is running, so I'm not sure if these errors are crucial. However I'm going to fix the errors now.
Baskaran, I will check the component controller and component usage as well but how can I identify the errors or should I just check it in general?
And what about the fact that both applications are running on the source system?
Additional info: the source system is ECC 6.0, the target system is Solution Manager 7.0
Thanks
Edited by: Tan Yildiz on May 4, 2011 9:26 AM

IPhone 5 proximity sensor not working! (iOS 6.0.1)

iPhone 5 proximity sensor not working! (iOS 6.0.1)
When I call , the screen is not locked(

Remove any screen protectors and cases, does the problem continue?

Transfer structure not active

Hi ,
in my process chain , it failed due to error: Transfer structure is not active.
How to correc this?
iam using BI 7.0
regards
sidartha

Hi Siddartha,
Try to activate the transfer structure using Pogram RS_TRANSTRU_ACTIVATE_ALL in SE 38. Give the Infosource & Source system name there & then execute.
Hope this will help.
~!Dpak

Transfer structure not active after runing RS_TRANSTRU_ACTIVATE_ALL

Hi BW Experts,
we are having a migration and just after migration we are finding the the transfer structure is not active. Hence in order to activate the same we ran <b>RS_TRANSTRU_ACTIVATE_ALL</b> program but still in the job log finding some problems like <b>0BP_RELTYPES_TEXT</b> is not available in source system. Kindly help in this regard since this is a critical issue and we are not able to run our daily loads because of this.
Can any one also tell me if it is a migration problem?
Thanks and have a nice day.
Warm Regards,
Akilesh

Hi Sriram,
This is the First time ur loading data from that system, If yes u need to do full extraction steps like transfer data source in RSA5 ..etc.
After that u need to replicate those DS from their respective sources systems in BW.
After doing those all actions, then u need to run the program 'RS_TRANSTRU_ACTIVATE_ALL'.
If u have multiple TS to be activated from one source system ---> u can enter Source system name and put * in Info source column after executing the program, it will activate all transfer structures which are linked to that source system at a time.
Hope this will help...if you have any plz reply.
Thanks
Raja Reddy.

Material ledger is not active in valuation area C002

Dear All,
I have a Scheduling Agreement for a material 'A' with Vendor 'V' with diff prices with validity dates, I did the GR & when i am posting the invoice thro' miro, system is throwing error as above Material ledger is not active in valuation area C002 Why should I activate the material ledger here ? Pls suggest how can i solve this ?
regds,
Kallu

Hi
For a Particular material, Material Ledger is active or not? Can be checked in Accountig view of Material Master.
Why we need Material Ledger?
A fundamental task of the material ledger is carrying inventories in multiple currencies and/or
valuations.
Material inventory values are normally carried by the SAP system in one currency. The material
ledger component enables the R/3 System to carry inventory values in two additional
currencies/valuations. Therefore, all goods movements in the material ledger are performed in up
to 3 currencies or valuations. Currency amounts are translated into foreign currencies at
historical exchange rates directly at the time of posting. Businesses such as those in highinflation
countries can therefore carry their inventories in a more stable currency (such as US
dollars). This reveals inflationary effects on inventory values.
If you use transfer prices to represent value flows in your company in different
valuation views, you must use the material ledger. This allows you to carry your
inventories in three different valuations (legal valuation, valuation for reporting
purposes, and profit center valuation).
Before activating the material ledger, make sure you know which currencies and valuations
you want to use, because you cannot go back and change the setting.
Activating the material ledger is a prerequisite for using multiple valuations.
Thanks
Raman

Material ledger is not active in valuation area S001

Dear All,
I have created a Scheduling Agreement & did the GR. When I am doing invoice posting system is throwing error as Material ledger is not active in valuation area S001
What might be wrong here ? For same material if I create PO then everything is working fine. Problem is only with SA.
regds,
CB

Hi,
Please check your Material Ledger Activation setting for the Valuation AreaC002 in T-code OMX1. The Check box for the ML activation against the Valuation Area-S001 may be ticked. After activation/ticking this box, T-code CKMSTART was not executed to complete the ML activation. If you want the activation of Material Ledger, you have to run T-code CKMSTART to complete this ML activation or Otherwise uncheck this box. I hope this step will resolve your issue.
Regards
appalas

NOOK Simple Touch says "Error Dialog: user not activated" whenever I try to open e-books?

I have had my Nook Simple Touch for about a year now, and I have been using Adobe Digital Editions without a problem. Now, all of the sudden, Barnes and Noble updated my software and I can't read any of my ADE books!! It just says "Error Dialog: User not activated" every time I click on them. I have looked at many other websites and I have tried plugging my nook in to my computer and reauthorizing it, reauthorizing my computer, deleting the digital editions file and .adobe-digital-editions file, redownloading my books, turning my nook off and on, crying, and screaming. The weird thing is, in all the instructions, it says a pop-up box will come up when I delete the files, but it never does. Is that normal? I always have to do it manually by clicking on the gear. I even made sure I "unhid" all the hidden files. I HAVE DONE EACH OF THESE AT LEAST 5 TIMES AND THEY NEVER WORK!!! HELP ME, PLEASE.
Also, a lot of the websites say to make sure your Barnes and Noble ADE I.D. is the same as the one on your ADE computer I.D.. Is the B&N ADE I.D. different from just the Barnes and Noble ID? Becasue I have been using my sisters email for my computer ADE and my email for the B&N I.D.. Are they supposed to be the same? If so, how come I was able to use it without a problem before?? I tried reauthorizing ADE with my email, because I also have an ADE account with my email, but then it wouldn't let me redownload my books onto the new account. Does this mean I have to change the ADE computer I.D. and wait until my books are available again to read them? Is that the way to fix it? UGH!
Help is much appreciated.
P.S. I have ADE version 2.0

Just to clarify, there are two levels of Authorization -- one for the ADE software and one for the nook. You have to use your Adobe account to authorize both (and they have to be authorized with the same user name). It sounded like your original problem (Kcoline) was with the Nook authorization, and it was the same problem the rest of us were having.
To get your files back, I suggest carefully reading over the "Activation and Authorization" section of the ADE help. It appears that ADE will automatically find your files but note the "Note" in quoted text below...
http://www.adobe.com/products/digitaleditions/help/
"After activation, any books, magazines, or other documents you previously bought with Adobe Acrobat® or Reader® software are migrated to Adobe Digital Editions. This is usually a relatively quick process. Adobe Digital Editions opens each item and reverifies its license to the user. If you don't have DRM-protected items, you don't need to be online during the migration. If you have a large number of items (for example, more than 100), then this process may take a while, but you will see a progress bar indicating the state of the migration as it proceeds.
Note: Items that you previously borrowed from a public library with Adobe Acrobat® or Reader® software are not migrated to Adobe Digital Editions. You need to return the library item and then borrow the item again with Digital Editions."
If it's not finding your files, it may be because they're located in a folder different from the one that ADE is trying to use to find them.
You may also want to check the "Transferring items between computers" section, as this describes where the files should be located, and how to reimport them into your library.
Good luck!

Material is not activated error in MM

Hi,
We'vs installed SAP IDES in our Landscape recently. Whenever I tried to create a new material using MM01 transaction code, it creates. But then when I tried to view the same in MM03 or MM02 it throws an error of the following,
The material XXXXX does not exist or is not activated
Message no. M3305
I'm unable to diagonis the problem properly. Will appreciate your help.
Thanks,
Rajesh Manoharan

>
Kishore Kumar Chiluka wrote:
> Hi
>
> Please get in touch with your BASIS consulatant , as the updates are not performing rightly, this seems to be asystem error.
>
> Thanks & Regards
>
> Kishore
Thanks a lot Kishore.
But unfortunately we don't have any Basis Guy separately. I was doubling up as Basis as well APO in my org . I'm pretty new to all these stuff. I searched in help.sap.com about this a lot, but couldn't find anything useful.
Can you help me in identifying a solution to this problem?
Thanks,
Rajesh Manoharan

Shrink database is not active in SQL SERVER Enterpriser manager

Dear guru
Shrink database is not active in SQL SERVER Enterpriser manager what to do
Rupesh
SAP BASIS Consultant

Hi,
>Thank you very much for not supporting i have solved the problem by reading some other documents
That's exactly what I wanted you to do : With a little personal work, you can actually learn to do your own work ! "Don't give fish to hungry people. Teach them how to go fishing !"
Regards,
Olivier

Sensor Not Activating?

Similar Messages

Maybe you are looking for