Sensor not recognised - Help!!
Hi,
I've used my nike +ipod for many happy miles of running - but it has suddenly stopped recognising the sensor. Help!! I have read some previous postings on this - and have tried:
pressing the sleep on my foot sensor
making sure there is no debris on the sensor
restored factory settings on my ipod
My ipod is saying it is linked to the sensor still - the 'nike +ipod' only comes up now on the menu when the sensor is plugged in - but regardless of how much I stamp around it isn't finding the sensor.
Can anyone suggest anything else I need to try? The foot pod is a bit worn (but clean) as I wear it over the laces. I haven't put anything to 'sleep' whilst using it and haven't seen any warnings about battery being low.....
Would appreciate any other thoughts on what may get me out happy running again!!
Thanks in advance
Jane
Hi, did you figure it out? i am having the same problem
Similar Messages
-
Upgrade CS3 TO CS4 - Serial Number Not Recognised - HELP!
Hi there,
From what I have been reading, there seems to ba a few people who are having problems upgrading to CS4 from CS3. Well, I'm afraid I'm another to add to the list. Can anyone help me in my plight?
My O.S is Windows XP Pro (SP3) and my computer has more than enough nuts and bolts inside it to run NASA never mind CS4! My anti virus is AVG 8.5 and my firewall is Zone Alarm, both of which were disabled during the attempted install.
I purchased the upgrade from the Adobe store (at £165) and had the box delivered - great so-far!
However, when I came to install the upgrade, and after putting in the correct CS4 serial, a window opened to inform me that the system-profile search, failed to find the CS3 in the defaul location - and believe me it's there! I followed the on-screen instructions, typing-in the serial number of my (leagally-bought) CS3; to my horror, it told me that the serial number was 'not a valid copy' when it clearly is!!
I have successfully installed the CS4 Upgrade only on a 30 day trial basis but still cannot register as it then tells me that BOTH my serial numbers are invalid. Suffice to say that the 30 day trial version was later uninstalled and I am now back to square-one and £165 poorer!
I have opened a case with Adobe but after over a week have still had no reply. Phoning customer support in the UK was also a no-no as their office hours (9-5 Mon to Fri) are not compatible with me as I cannot be next to my machine during these times (Unless I take a day off!) My next option is to phone the States but hey - it's only money!!
My question is therefore - can anyone help or make suggestions as to how I can resolve this issue. A point to note that after buying and installing CS3 I notice in the headline (once the programme is running) it is labelled 'CS3 EXTENDED' yet this is not written on the box - is this normal? The CS4 Upgrade was the same so it looks like I am trying to install a like-for-like product.
Thanks in anticipation.
SmudgeWhat's the point though of issuing upgrades that don't upgrade?
Well, once it was pretty easy. There was only one full-version of PS. Back then, there were variations with terms like "Lite," and "LE," and these were basically bundled with scanners, etc. They were the precursors to PSElements. For a bit, there were only two PS and PSE. The "upgrade" was either the full-version upgraded to the next version, or the full-version from PSE. Then "Extended" was introduced, and now there are two full-versions. Each will have their own upgrade path, so some care needs to be exercised. Extended basically offers more video capabilities over the "regular."
Upgrade paths have also changed, and can come into play, when one uses a stand-alone to upgrade to a "suite." Once, one could upgrade separate programs directly, but with suites, things get a tad more complicated. Though I've had straight PS versions since 2.5, once I went to the Production Stuido suite with PrPro, AE and Audition, I could no longer use my PS license to JUST upgrade PS to PS-Extended. I would have to do the full suite, and now there are several flavors of the Video suites, with one including upgrades for all of my old Macromedia Studio suite. I follow this stuff fairly closely, and have to admit that I am confused, and the Adobe site (good in many other ways) does not cover the various suites and how to get to each from where one is, as well as it could. However, a chart of all possibilities and what is in each suite might fill four screens.
Then, you have to factor in that many resellers do not furnish all the necessary info on what is needed to qualify for specific upgrades. Once, when there were fewer resellers, one had to give the S/N for their existing product, and then this was matched up to the requirements of the upgrade. Now, there are just too many resellers to do that - or Adobe has become a bit more, um-m, "relaxed."
Over the decades, I have found Adobe Customer Support (not necessarily Technical Support) to be quite good and accommodating, when I did have any problem. In the past, they did all that they could to keep me satisfied, and did a good job of it.
Good luck, and please report how it goes,
Hunt -
I recently connected my new ipad to my itunes, but now itunes will not recognise my ipod classic, and 50gig of music has gone. ipad connects ok but no longer ipod which has been there for two years! help!!!
What happens when the iPod is plugged in? anything? any errors?
Why is 50GB of music gone? All music should exist on the computer. Only a fool would rely on a single device which could easily be lost or stolen to store their content on. -
I have recently changed lap tops and moved my itunes library successfully.
However I cannot now synce my ipod classic with the new windows pc.
The lap top is not recognising the ipod.
I have spoken to apple and they think its a settings issue on my pc ? I have fully deleted and then reinstalled itunes .
can any one help ? This should be easy to resolve but appears to be a common issue when looking on the web.
Thank youHere is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc. -
I have attempted to upgrade os4 to os7. At the end, it threw an error that i had to turn off "Find my iphone" on my phone, which seems to be impossible at that stage as i could not access beyond the upgrade screen.
I thin chose to set up as new iphone, but icloud has taken an old expired email address for which i do not know the password. icloud will not recognise my current itunes email and password, so i now have os7 but am unable to restore from my itunes back up.
Desperately need help please... Any help appreciated
ThankyouIf you don't know your password, don't know your security questions and don't have a rescue address or don't receive a reset email, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support. -
my ipod touch just shows the charge symbol on the screen and i checked whether there is a problem in the charger but it works perfectly on my iphone 4 and when my ipod is connected to the computer itunes is not recognising my device pls help me
tmplHi pranoop,
If you are having an issue with your iPod touch not being recognized by iTunes when connected to your Windows computer, I would suggest that you troubleshoot using the steps in this article -
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Sincerely,
Brett L -
My new ipod touch is not recognised in itunes or Windows 7 on any of my computers/laptops. I've followed the online advice and still no luck. Help much appreciated!
Does it charge?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try another cable
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar -
My Ipod Touch is not recognised in itunes or my computer but still charges, Please help
My Ipod Touch is not recognised in itunes or my computer but still charges when connected via USB Please help
Did plugging it into another USB port do any good? Make sure it is a USB port on the back of your PC and not via a USB hub or one on the front as they sometimes do not output enough power for the iPod to properly communicate with your PC.
Do you have another 30 pin dock connector cable around you use to try and rule out a faulty cable?
Did you try a hard reset of the device with it still connected to your PC? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
With the article above were you able to verify that the Apple Mobile Device Service was installing and running on your system?
Lastly, try plugging it into a different PC to see if it is recognized there. It can help narrow down whether it is an issue with the iPod or with your PC.
B-rock -
Ipod in not recognised by windows or itunes. PLEASE HELP!!!!!!!!!!
I have a 5th gen 30gb video ipod which was fine up until the start of january when i tried to connect my ipod to my laptop and it was not recognised by windows as a usb device, i'v been through the device manager and can not find it there. USB port are fine as other things connect, i've tried 3 different usb cables. I've run diagnostics and got the following
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Inc. Inspiron 1501
iTunes 7.5.0.20
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
Current user is an administrator.
The current local date and time is 2008-01-15 13:16:51.
Video Display Information:
ATI Radeon Xpress 1150
** iPod Connectivity Tests **
iPodService 7.5.0.20 is currently running.
iTunesHelper 7.5.0.20 is currently running.
Apple Mobile Device 1.14.0.0 is currently running.
Universal Serial Bus Controllers:
Standard Enhanced PCI to USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Device Not Currently Connected:
Fifth Generation iPod (iPod with video) running firmware version 1.2.3
Serial Number: 8M6398VKV9K
Can someone please please please help me, i've run the 5 r's, i've tried to put it in to disk mode etc etc and still it will not connect.
it looks like many people are having this problem with the same model.
You can e-mail me direct on [email protected] if easier.Same as, although a new development on this last night, I borrowed a mates USB hub that has it's own mains power supply and for a short time my laptop recognised my IPOD, I obviously thought i had found the solutions as it started to sync at which point the smug smile left my face as i could smell burning plastic. Yep, the usb cable was melting in to the USB hub. so not only won't the sodding thing work properly it is a god **** fire hazard. Luckily our producst that cost hundreds of pounds are supported by friendly and helpful people at Apple!!!!!!!!!!!!
Oh and i downloaded itunes 7.6 last night and nothing.
PLEASE HELP!!!!!!!!!!!! -
please help. ive bought a second hand ipod nano, when i connect it to my pc, it does not recognise it in itunes,yet it comes up as a sigma mass usb device. its an ipod nano 8gb?. im running on windows vista,my own ipod classic runs fine.
there is a good chance that this can be related to bad contact in USB lead.. e.g not enough power from IPOD to PC so that pc cannot recognise it. Where I work I get alot of USB devices on pc's that are not recognised and most of the time it is the connection to the device that is not good enough because the flat end of the USB adapter has been gradually bent over time just slightly and now contact is not good. It can also be todo with drivers or If you are using it through a USB hub.
so if it is not working through USB hub try direct. also try in back of PC as these Ports or direct access to main board to pc and would be less trouble some if there was a voltage loss from mainboard in pc to front of unit. -
Help- windows not recognising Ipod shuffle first installation
What do I do?
I tried following the steps but it failed in the formatting. Now windows is not recognising it so I can restore it to factory settings.
Can someone give me a step by step guide what to do. The help section is awful confusing and the chatt section is saying I bought by suffle in jan not yesterday.
Currently i have it plug in with me in the net cafe and the light is green.Windows will not recognise my ipod shuffle, I have
tried reinstalling it, when I try playing music it
just clicks.
I still have I Tunes, just cannot connect the Ipod to
update. I have had it for four months, I am afraid
it may be a fault with the ipod, any ideas? The pop
up says windows does not recognise the USB device,
try reconnecting it, or replace device ! Help would
be appreciated please.
Did you ever get an answer? My shuffle is not being recognized by windows either. -
Replacement ipod touch not recognised by computer/itunes - help?
Apple store replace ipod touch 4thgen. New ipod not recognised by computer/itunes. Can't figure out the problem - help please.
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem -
my ipod 7th generation is not recognised by itunes and my computer. I am not able to transfer any songs. Please help me on this regard. I tried all the steps from apple website
This article should give you the options
https://discussions.apple.com/docs/DOC-3991 -
Help - my iPod Nano is not recognised by windows
Hi I have recently bought a new ipod nano (8gb Aluminium case) and it is not recognised by windows. I have run through all of the trouble shooting tips (reseting ipod, reinstalling itunes, getting latest windows updates, even deleting my temp files). I have also tried all USB ports and tested them with a memory stick to make sure that they are working.
I can hear the standard windows sonic (ding-dong) when I plug in the ipod, but there is no indication of it in my computer or itunes.
Can anyone help me here?Have you tried putting your iPod into disk mode, then connect it to your computer?
Putting your iPod into disk mode
If that doesn't seem to work, try out all the troubleshooting steps in these links:
The Five R's
iPod missing in My Computer or in iTunes
-Kylene -
iPod classic is not recognised on iTunes. My iPod screen is flickereing constantly - from upside down to the right way around. It wont even show up on my iTunes. I plug it in to my MacBook and it gives me the option to restore but then once Ive clicked it says that 'it cannot be restored as there is no iPod found' when it connected and it says so on my iPod screen. Please help! Thanks J
Tried resetting the ipod and its enabled to be used as hard disk on itunes.
I assume you mean the "Enable Disk Use" option is enabled from under the iPod's Summary tab?
B-rock
Maybe you are looking for
-
Hello Adobe Team. I am thinking about purchasing the Adobe Cloud Program. I am most interested in the video editing features. I live in Northern BC and have limited internet access. My question is: do I need to be connected to the internet to use th
-
Application mgr. not working!!
Have found one more problem in my nokia 5233. Today while playing around with my 5233, i found that now when i try to open app. mgr. on my phone to uninstall my installed apps, its not working anymore. its was working till yesterday. Now whenerer it
-
I purchased some songs from I-tunes and they show up on my I-tunes list on my computer, but did not sync to my I-pod. How can I get them to sync to my I-pod? Any help would be appreciated! Thank you!
-
Why is there NOT a version of iTunes that is compatible with WindowsXP Pro 64? When are Apple gonna get their fingers out of their butt and release a 64 version? Anyone else have a similar problem and are just as annoyed as I am? Thanks AMD64 Custom
-
Post Author: Set_Shot_Dave CA Forum: General Hello All, Let me set up my problem first. I have a running total from a subreport and a running total from my main report. I shared my running total from both reports ( it didn't work when I did or didn't