Sent faxes show wrong date on HP Officejet 4630 e-All-in-One Printer

The date shown on faxes I send show dates in March, 2014; the time of day is correct.
There was nothing in the setup process that referred to dates.
This question was solved.
View Solution.

That's the Date and Time on the device (that was set the first time the device is set up). You can update this info on the device using the control panel.
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

Similar Messages

HP Officejet 4630 e-All-in-One Printer Black Ink not Working

My HP Officejet 4630 e-All-in-One does not print black ink but the color ink is working perfectly fine even though the ink status shows that there is black ink left. After I've changed a new black ink cartridge, it will start to work again but after one day it stop printing black ink again. I've only printed a page the previous day and the ink status shows that there's black ink left in it (close to full). I've tried the methods stated here (http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03882718&cc=sg&dlc=en&lc=en&product=5305051) but the black ink still doesn't work. So how can I solve this problem??

Hello @3oshua,
Welcome to the HP Support Forums! I see you are running into some print quality issues on your HP Officejet 4630, you are unable to print in black ink, even after replacing the cartridges.
I see you have exhausted the steps listed here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, with no success.
Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge. I highly recommend you call our technical support at 800-474-6836, to see what options they have available for you. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

My hp officejet 4630 e-All-in-one printer won't connect to the internet

My printer was working fine. I hadn't used it for a few days. Now, all of a sudden it says it's not connected to the internet. I don't know if it's because it's giving a hardware address for MAC or if it has the wrong IP address. I can't figure out any way to give it the new IP address.
Got it fixed from the "Doctor!" Thank you, Kent!!!

OK, that all looks good. Is the firmware updated on the router? Have you restarted the router (pull its power plug momentarily)?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Officejet 4630 e-All-in-One Printer

My scans are giant (each page is taking 2-4 minutes to print). Perhaps it's super-super hi res? How can I change the settings so the scan still looks good but the file size is smaller?

Hello kchewitt, and welcome to the HP Forums, I hope you enjoy your experience!
I understand you're having issues with your scan size. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP Officejet 4630 e-All-In-One Printer problem

I have installed all the software and ran all the tests and all areas pass. Test printing comes out just fine. But when I try to send something to the printer, nothing happens, the printer just sits there. Does anyone know what the problem might be?
This question was solved.
View Solution.

I still don't believe this, but I took a chance and pulled the USB out, then plugged it back in. It worked.

Officejet 4630 e-All-in-One scanner software mac os 10.6.8

Does Officejet 4630 e-All-in-One scanner software for Mac OS 10.6.8 exist and what is the URL to download, Thanks...

Hello tedstaley, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are looking into scan drivers. I would like to help.
The software is included in the full feature package. I would recommend downloading and running the HP Officejet 4630 e-All-in-One Printer series Full Feature Software and Drivers.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP Officejet 4500 Desktop All-in-One Printer - G510a and Windows 8.1

The drivers for this do not seem to work on Windows 8.1. Whilst I can print no problem I cannot access the solution centre from my new laptop and i cannot scan. It gives me the message No scan options refer to device documentation to troubleshoot. It works fine on my old laptop which has Windows XP installed.
NB i have tried installing from your website and when i click on install it runs for a few seconds then sends the error message that it cannot find the file.
Does this mean that the HP Officejet 4500 Desktop All-in-One Printer - G510a is not fully compatible with Windows 8.1. Help please I am getting very frustrated.

Hi amp229,
Welcome to the HP Forums!
I see that your are getting the specified file cannot be found error, during the installation.
Please try the following:
1.) Check that IE pop-up blockers are turned off before downloading the installer. Internet Explorer Pop-up Blocker: frequently asked questions.
Then try the install.
2. If you're running McAfee Live Safe or any other firewall, please temporarily disable the "real time scanning". Turn off real-time scanning.
Then try the install.
3. Go to the start screen (you may also press the windows key + R to open the run box) and type %WINDIR% this should show the windows folder.
Click on the folder and scroll until you see files. Look for a filed named "HPWINS*.DAT" (the * is for a number that varies) remove this file and try the installation.
Then try the install.
Hope this information helps, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Wireless configuration for HP OfficeJet 6500A plus All-In-One printer on Ubuntu 10.04

I have bought a HP OfficeJet 6500A plus All-In-One printer CN557A, which I want to use with ubuntu 10.04 64-bit as a wireless network printer.
Before i bought i checked compatibility on www.hplipopensource.org and www.openprinting.org, and all was in order.
The machine is autodetected and fully functional when connected with a usb cable, but i have not managed to get it to work as a wireless printer.
This is what I did:
I configured the printer on the wireless network (through the printer interface), and it connects. It prints out a "Wireless Network Test Report", and everything works. I can ping to its local ip adress, and access it through the browser. HP eprint also works.
I installed hplip 3.11.10 and dependencies manually. I did this because the default hplip in ubuntu 10.04 did not recognise the device.
I ran 'hp-check', which gave no errors or warnings:
tjoff@mek-403-jakbo-01:~$ hp-check
HP Linux Imaging and Printing System (ver. 3.11.10)
Dependency/Version Check Utility ver. 14.3
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
| SYSTEM INFO |
Basic system information:
Linux mek-403-jakbo-01 2.6.32-35-generic #78-Ubuntu SMP Tue Oct 11 16:11:24 UTC 2011 x86_64 GNU/Linux
Distribution:
ubuntu 10.04
Checking Python version...
OK, version 2.6.5 installed
Checking PyQt 4.x version...
OK, version 4.7.2 installed.
Checking for CUPS...
Status: scheduler is running
Version: 1.4.3
error_log is set to level: warn
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0
| COMPILE AND RUNTIME DEPENDENCIES |
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.
Checking for dependency: CUPS image - CUPS image development files...
OK, found.
Checking for dependency: DBus - Message bus system...
OK, found.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
OK, found.
Checking for dependency: libusb - USB library...
OK, found.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python devel - Python development files...
OK, found.
Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
| HPLIP INSTALLATION |
Currently installed HPLIP version...
HPLIP 3.11.10 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.11.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.11.10
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.11.10
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
printer_name =
working_dir = .
device_uri = "hp:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW"
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[installation]
version = 3.11.10
date_time = 2011-11-16 14:30:35
[settings]
systray_messages = 0
systray_visible = 0
[fax]
email_address =
voice_phone =
[refresh]
rate = 30
enable = false
type = 1
[polling]
enable = false
device_list =
interval = 5
| DISCOVERED USB DEVICES |
Device URI Model
hp:/usb/Officejet_6500_E710n-z?s HP Officejet 6500 E710n-z
erial=CN16F2402Q05JW
| INSTALLED CUPS PRINTER QUEUES |
B-403-271-A4-COLOR2
Type: Unknown
Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-Color
B403-271-A4-BW
Type: Unknown
Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-BW
HP-Officejet-6500-E710n-z-FAX
Type: Printer
Device URI: hp:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW
PPD: /etc/cups/ppd/HP-Officejet-6500-E710n-z-FAX.ppd
PPD Description: HP Officejet 6500 e710n-z, hpcups 3.11.10
Printer status: printer HP-Officejet-6500-E710n-z-FAX is idle. enabled since 2011-11-16T01:00:45 CET
Communication status: Good
| SANE CONFIGURATION |
'hpaio' in '/etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
device `hpaio:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW' is a Hewlett-Packard Officejet_6500_E710n-z all-in-one
| PYTHON EXTENSIONS |
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
| USB I/O SETUP |
Checking for permissions of USB attached printers...
HP Device 0x5412 at 002:005:
Device URI: hp:/usb/Officejet_6500_E710n-z?serial=CN16F2402Q05JW
Device node: /dev/bus/usb/002/005
Mode: 0664
| USER GROUPS |
lp adm dialout cdrom plugdev lpadmin admin sambashare vboxusers
| SUMMARY |
No errors or warnings.
Done.
I then ran 'sudo hp-setup', chose the device (which was detected), chose my wireless network, entered the wireless security key. On the configuration results dialog I get two messages:
"Your printer has been succesfully configured on the wireless network. You may now unplug the USB cable"
and
"The Ethernet cable is plugged in which will prevent you from connecting to a wireless network. To connect wirelessly, remove the cable and try again. (VSA000)"
There is no ethernet cable plugged in, so i can't remove it. I unplug the USB cable and click 'finish'. This makes the 'hp-setup'-dialog start over again, and the printer has not been installed.
In the terminal i have the following:
tjoff@mek-403-jakbo-01:~$ sudo hp-setup
[sudo] password for tjoff:
HP Linux Imaging and Printing System (ver. 3.11.10)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Searching on USB bus...
GET /IoMgmt/Adapters HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/Adapters/Wifi0/WifiNetworks HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/Adapters/Wifi0/Profiles/Active HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/Adapters/Wifi0/Protocols HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
error: Missing response key: 'iorotocols-iorotocol-dd:dnsserveripaddress-0'
GET /IoMgmt/Adapters/Wifi0/VsaCodes.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/Adapters/Wifi0/WifiNetworks/SSID=mVnmXfsu HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
GET /IoMgmt/IoConfig.xml HTTP/1.1
Host: localhost
User-Agent: hplip/3.0
Content-Type: text/xml; charset=utf-8
Content-Length: 0
I then tried to reconnect the printer usb cable and run 'hp-toolbox' and click "Wireless/wifi setup using USB". Now i get the error:
tjoff@mek-403-jakbo-01:~$ hp-toolbox
HP Linux Imaging and Printing System (ver. 3.11.10)
HP Device Manager ver. 15.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
HP Linux Imaging and Printing System (ver. 3.11.10)
Wifi Configuration Utility ver. 1.1
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
error: Channel write error
error: An I/O error occurred. Please check the USB connection to your printer and try again. (Device I/O error)
Done.
I do not how get past this stage, and any help is welcome.
This question was solved.
View Solution.

A friendly soul on ubuntuforums pointed out to me, that the wireless configuration is only necessary when the printer is NOT connected to a (W)LAN. So all I really had to do was to configure the printer in the CUPS administation page, and it worked. Problem solved. Silly me.

Paper Jam error message due to broken gear on Officejet Pro 8500 all-in-one printer

3 year old HP Officejet Pro 8500 all-in-one printer (haven't used it much). Keeps telling "Paper Jam" although there is no paper jammed anywhere (searched meticulously with a flashlight after watching HP's tutorial videos on how to clear paper jams). I started searching on the Internet and found a couple of related videos on Youtube that pointed me in the right direction:https://www.youtube.com/watch?v=PMFW1RRlDHEhttps://www.youtube.com/watch?v=EwbF2Vs_0gQ I could hear a clicking noise on that area of the printer each time I turned it on, so I carefully took the black cap apart that was hidding the gear, and confirmed I had the same problem as in the youtube videos above. See picture below showing the white plastic gear part that has a large crack which causes the Paper Jam error message and renders the printer unusable. After Googling a little bit, seems like a relatively common issue and wonder why such a part like that is not made of a stronger material like metal (planned obsolescence maybe?). Does anybody know if there is a way of replacing the broken gear? (I really care for the environment and I would like to avoid having to throw the relatively new and expensive all-in-way printer away) Thanks a lot in advance for the advice!

Hey , Thanks for posting in the HP Support Forum. I do see that a cracked gear in your HP Officejet Pro 8500 All-in-One Printer is impeding all functionality. I would like to help you with this but that particular part is not replaceable. I recommend you reach out to our tech support team to find out what servicing options you have available. You can click on the following link to initiate a case: www.hp.com/contacthp/
Once you fill out the online form to create your case you can choose from different direct contact methods. I hope this helps. Regards,

HP Officejet Pro L7780 All-In-One printer

I am running Windows 8.1
The printer status OFFLINE.
It has done this in the past and I have been able to correct it by deleting and reinstalling it (at least back when I was running Windows XP and 7. Possibly at that time it was the DHCP issue pointed out in a previous post.
Now however, I can remove it and when I add it back, using Control Panel, Devices and Printers, Add a Printer, it is recognized correctly on the network (shows the IP address I know is in the printer) but when I try to send a test page, I get a pop-up saying it is OFFLINE. When I status it, it confirms it is offline.
There is no indication at the printers display that it is offline and it shows it is communicating with the network.

I can’t give you more than the info in my question about the model of the printer-HP Officejet Pro L7780 All-in-One printer
I had been using this printer for several years and this has happened a few times in that it required me to delete it and reinstall—that just does not work now. This last time was after I had upgraded to Windows 8.1 however I did that several weeks ago and it has worked okay since then…this is the first time it has stopped working on 8.1 however
Running Windows 8.1
I tried connecting via wireless and also switched over to wired lan but got same results (Printer Unavailable)
Used DHCP but get the same with static ip address
Cisco Lynksys E4200 wireless router
Just ultimately get Printer Unavailable when I try to print or status the printer
When I try wireless, I see the wireless icon bright blue like I expect it to

How can i print between my galaxy s4 and hp officejet 150 mobile all in one printer

i have connected my hp officejet 150 mobile all-in-one printer to my lap top. Now I want to connect my printer to my smartphone galaxy s4 via bluetooth but the phone is new and I am not sure next steps. Help.
This question was solved.
View Solution.

Printershare worked out great. I have tried so many apps, glad to find one that worked for my mobile officejet printer and android s4. Now the true test, take it on the road. Thanks all.

HP Officejet Pro L7580 All-In-One printer with Windows 8

I have the HP Officejet Pro L7580 All-In-One printer and want to use it with my new laptop that has Windows 8, but it won't accept the Starter CD (Windows 2000, XP, Vista). Where can I get a free download to use with Windows 8? I can print, but currently can scan.

Hello,
You can download the software for your product from the link provided below, after selecting the appropriate Windows 8 operating system of your computer:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=2512008&lc=en&cc=us&dlc=en&lang=en&cc=us
The link also has support videos that provide instructions on downloading and instaling the software.
Although I am an HP employee, when I offer advice on HP Products, I'm speaking for myself and not for HP

HP Officejet Pro 8610 All-in-One Printing Preference does not have Print Last Page First option

HP Officejet Pro 8610 All-in-One printer: Printing Preference missing Print Last Page First option. Print lots of multipage documents. Spending enormous amount of time resorting pages.
Prior to this printer? .... grab printed stack - staple - DONE!
Now? Have to resort every document!
Anyone out there have a solution?

Reply to mkjohnson42. It doesn't matter what application I'm in. The option is NOT there. Just to confirm, I started from Word 2010, Excel 2010, a web page using Internet Explorer, Foxfire and Chrome. Plus, I did the old stand-by of going to Printers and Devices>Preferences. Under Preferences I have the choice to print on both sides of paper but NO Print Last Page First. I REALLY did check ALL of this before resorting to the Community. So, I really don't understand your question. Sorry.

On a HP Officejet Pro L7780 All-in-One printer, is there a toner and where is it?

On a HP Officejet Pro L7780 All-in-One printer, is there a toner and where is it located? I've looked in Products and Supplies and don't see it but my printer is saying that it's low or empty.

By now, you have probably discovered that the L7780 does not use a toner but cartridges. It actually uses 4 HP 88's. They are black, magenta, yellow and cyan. Usually, black is the first to be replaced. They can be found at Staples, Office Depot and Best Buy.

Helvetica Font Available for HP Officejet Pro L7590 All-in-One Printer

I have a client that needs to use Helvetica for the HP Officejet Pro L7590 All-in-One Printer, but we are not seeing this as an option.
I assume the driver doesn't provide this font? What other options exist for using the Helvetica font with this printer?
Thanks,
Jeremy

Hi,
It should be included in Full Feature software on the following link:
http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-Pro-L7000-All-in-One-Printer-series/360...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Sent faxes show wrong date on HP Officejet 4630 e-All-in-One Printer

Similar Messages

Maybe you are looking for