Sent mails (through Exchange) are not saved anywhere

Apple's Mail sends the mails normally but no sign of these mails can be found afterwards. Normally they would go to the Sent-mailbox. This behaviour started after the change to  Mavericks.  This problem occurs only when the mail server is Exchange.

I installed Mavericks and I am seeing similar problems with Exchange Mail, although after reading this post I just tested the Sent-Mail Issue, I thought I had the same problem, but noticed after I click Mailbox Synchronize the outgoing messages appeared in the Sent Folder.  I don't recall having to do this before, maybe it is a preference setting?
The problem I am getting though is a stability one using Mail/Exchange- I send an email using Mail/Exchange and sometimes get a message say "failed to connct to server", I hit Re-Try and it sends on the second time.   This is definitley an issue that only started after loading Mavericks.
OS X 10.9 Macbook  Microsoft Office 360 Exchange

Similar Messages

  • The messages sent with PC suite are not saved in m...

    I have a bluetooth device to connect my phone (Nokia 6233) to PC. When I'm trying to send a message everything goes perfect (the message is sent) only one problem appear: the message is not saved in my phone.
    Any ideas for this problem?
    Why the messages sent with PC suite are not saved in my phone?

    there may be differencies between phone models here (S60 devices or S40 devices, you have S40). Also if I recall right, it used to be so that some older versions of PC Suite did not save the PC sent sms's to phone.
    However, with my N95 the messages are saved. So make sure you have the latest Pc Suite and then try again. If it fails, then it might be that message saving is not supported with S40 phones (Anyone having a S40 phone could verify this)

  • Sent mails from CRM are not reaching to destination..

    Hi experts, good afternoon.
    I have configured an action to trigger an email when the document is saved.  But the problem is action is shown as executed in transaction level, even in SCOT it is showing as completed but in SOST sent mails it is not shown and it is not reaching to my mail inbox also.
    Please help me out in this regard.  Please let me know what could be the problem.
    Regards
    Madhav

    Hi Maddy,
    I am facing the same issue. I was not able to see any of my entries in SOST. I went to the tab 'send status' in SOST and and clicked on the button 'Further' and selected 'Still Not Entered in Queue'. Now I can see it in SOST with status 'Still no entry in queue'.
    Are you also facing the same problem? When you find the solution, please let me know.
    Regards,
    Neena

  • My sent messages or templates are not saved in the sent or template box.

    My sent messages are not appearing in my sent box. I try to save an email as a template, but it does not save. Help!

    there may be differencies between phone models here (S60 devices or S40 devices, you have S40). Also if I recall right, it used to be so that some older versions of PC Suite did not save the PC sent sms's to phone.
    However, with my N95 the messages are saved. So make sure you have the latest Pc Suite and then try again. If it fails, then it might be that message saving is not supported with S40 phones (Anyone having a S40 phone could verify this)

  • With 'Mail v8' and 'Yosemite' accounts settings are not saved and I keep having to check the "SSL" box

    With 'Mail v8' and 'Yosemite' 'mail' "account settings" are not saved and I keep having to check the "SSL" box. This has only occurred since upgrade to Yosemite?
    Any help would be appreciated as this is so frustrating!!

    Update to 3.6.16 has fixed this problem.

  • SMS sent from Nokia Suite is not saved

    PC Nokia Suite (7.1.18.0) seems to be working fine on both Bluetooth and USB Cable with my Nokia 6300 (FW is V07.21).
    EXCEPT, whenever I send SMSs from the Nokia Communications Centre, they are not saved anywhere.  I assume that they should save in NCC and immediately be replicated back to my phone, but that is not happening.  So I have no record of anything I have sent, unless I key it in onto my phone. 
    All off the other categories of SMS (Inbox, Outbox, Drafts, Archive) seem to replicate OK between phone and NCC.  Why not the Sent messages?
    And yes, I am sure that the messages are being sent - that was the first thing I checked 
    What am I (or the SW) doing wrong?
    Thanks  

    unfortunately I'm also suffering from lack of this feature. however I'm not sure which other mobile phone can do something like requested by author (and me ).
    Suppose it has something to do with the way desktop software works with GSM phones, it probably just sends series of AT commands to GSM phone modem, initiating sending of message. Saving of message into "Sent" box may be not implemented into standard AT command set (but here I'm only guessing).
    I've happened to work with old Siemens phone and it behaved almost same way, i.e. messages were sent but not saved in "Sent" box. However there was a trick - desktop software had not only "Send" but also "Save" button, and pressing of this button saved messages in "Drafts" box. So if I needed absolutely message to be saved in "Sent" box, I prepared messages and saved them to "Drafts". Later I should take my phone and send messages manually from phone, so at least I saved efforts on typing, but had to work from both PC and phone interfaces to send message.
    I'm not sure if any "alternative" software for Nokia phones (like Oxygen Phone Manager) have this capability, but if you look at this screen http://www.oxygensoftware.com/en/products/opm2/images/SMSPictureMessage.gif you shall see there "Save" button which may possibly (?) implement same functionality.
    Message Edited by sidream on 05-Apr-2009 05:50 PM

  • Pictures taked with Camera are not saved.

    When taking pictures using my iPad Air the app functions normally but the pictures are not saved to the iPad.  Am I missing a setting somewhere in Settings?

    Yes, they are on the "Camera Roll".
    When I had iPad (the original) these are saved pictures from various apps (Facebook, Wikipedia, emails, ......)
    When I up graded to iPad Air everything transfered over.  Thus pictures are stored in "Camera Roll".
    This still does not explain why pictures taked on the iPad are not saved anywhere.
    Thanks for the response.

  • Mail App - New Accounts not saving

    Im creating new accounts, but once I close the Mail app they are not saving (I can see the account while I have Mail open, but once I close it they dissapear from both the Mail app mail folders and the Accounts/Settings).
    This is the error Im getting in the Console
    2/20/14 10:35:46.376 AM Mail[482]: Error writing to /Users/javiergonzalez/Library/Mail/V2/[email protected]@pop.bizmail.yahoo.com/.mboxCache.plist: Error Domain=NSCocoaErrorDomain Code=513 "You don’t have permission to save the file “.mboxCache.plist” in the folder “[email protected]@pop.bizmail.yahoo.com”." UserInfo=0x600000a60600 {NSFilePath=/Users/javiergonzalez/Library/Mail/V2/[email protected]@pop.bizmail.yahoo.com/.mboxCache.plist, NSUnderlyingError=0x60000084c060 "The operation couldn’t be completed. Permission denied"}
    2/20/14 10:35:46.399 AM Mail[482]: Error writing to /Users/javiergonzalez/Library/Mail/V2/Mailboxes/.mboxCache.plist: Error Domain=NSCocoaErrorDomain Code=513 "You don’t have permission to save the file “.mboxCache.plist” in the folder “Mailboxes”." UserInfo=0x600000a720c0 {NSFilePath=/Users/javiergonzalez/Library/Mail/V2/Mailboxes/.mboxCache.plist, NSUnderlyingError=0x600000855cf0 "The operation couldn’t be completed. Permission denied"}
    2/20/14 10:36:16.135 AM Mail[482]: Error writing to /Users/javiergonzalez/Library/Mail/V2/Mailboxes/.mboxCache.plist: Error Domain=NSCocoaErrorDomain Code=513 "You don’t have permission to save the file “.mboxCache.plist” in the folder “Mailboxes”." UserInfo=0x608001273080 {NSFilePath=/Users/javiergonzalez/Library/Mail/V2/Mailboxes/.mboxCache.plist, NSUnderlyingError=0x60800044d830 "The operation couldn’t be completed. Permission denied"}
    2/20/14 10:36:16.137 AM Mail[482]: Error writing to /Users/javiergonzalez/Library/Mail/V2/[email protected]@pop.bizmail.yahoo.com/.mboxCache.plist: Error Domain=NSCocoaErrorDomain Code=513 "You don’t have permission to save the file “.mboxCache.plist” in the folder “[email protected]@pop.bizmail.yahoo.com”." UserInfo=0x600001262280 {NSFilePath=/Users/javiergonzalez/Library/Mail/V2/[email protected]@pop.bizmail.yahoo.com/.mboxCache.plist, NSUnderlyingError=0x600000241020 "The operation couldn’t be completed. Permission denied"}
    2/20/14 10:36:23.725 AM Mail[487]: Error writing to /Users/javiergonzalez/Library/Mail/V2/Mailboxes/.mboxCache.plist: Error Domain=NSCocoaErrorDomain Code=513 "You don’t have permission to save the file “.mboxCache.plist” in the folder “Mailboxes”." UserInfo=0x60000086a340 {NSFilePath=/Users/javiergonzalez/Library/Mail/V2/Mailboxes/.mboxCache.plist, NSUnderlyingError=0x6000008448f0 "The operation couldn’t be completed. Permission denied"}
    2/20/14 10:36:23.726 AM Mail[487]: Error writing to /Users/javiergonzalez/Library/Mail/V2/[email protected]@pop.bizmail.yahoo.com/.mboxCache.plist: Error Domain=NSCocoaErrorDomain Code=513 "You don’t have permission to save the file “.mboxCache.plist” in the folder “[email protected]@pop.bizmail.yahoo.com”." UserInfo=0x60000086a580 {NSFilePath=/Users/javiergonzalez/Library/Mail/V2/[email protected]@pop.bizmail.yahoo.com/.mboxCache.plist, NSUnderlyingError=0x600000653410 "The operation couldn’t be completed. Permission denied"}
    I have verified permissions via Disk Utility, but that hasnt helped.
    Any ideas?

    I have fixed it! All I did was to select "replace all information in iPhone from Maill" and worked.

  • Some sent mails do not appear/are not saved in "sent messages" and are lost

    i work with mail and 4 different imap accounts. about every 15th sent email "gets lost". i.e. i can follow the sending process in the activity window, and i hear the sending confirmation tone. and, usually, the mails even reach the receiver. BUT, the mails do not appear/are not saved in the "sent messages" folder and are lost. this is very unsettling, as there seems to be no recognizable pattern. can anyone help, or should i change to "entourage"? big thanks for replies
    Message was edited by: Bassolino

    Hi Bassolino and David,
    I, too, have had this intermittent issue and wonder if you had found a solution?
    In the past 3 weeks, two messages have been sent from my mac mail account, using the mail application (the only apparent common factor being that both messages had iphoto attachments), the recipients have received them - only I do not have a copy in my 'sent' folder.
    They are not stored on the macintosh server either...
    I have not altered any settings and this intermittent issue has just emerged.
    Any help from 'Top Users' would be welcome. Thanks.

  • Mail 3, smtp, IMAP: sent messages are not saved on server

    Hello,
    I had problems using Mail 3 after I upgraded to Leopard, so I used Thunderbird for the time being. With the update 10.5.1 I tried again: most problems solved BUT: sent messages are not saved on the server in mailbox "Sent".
    Some background: I deleted the folder "<User>/Library/Mail" and "<User>/Library/Preferences/com.apple.mail.plist" and configured Mail from scratch.
    To be sure: I still have Thunderbird installed, and when I send with Thunderbird: a copy is placed in "Sent".
    Another thing I noticed: it takes more than a minute to send from Mail 3 and a few seconds when I send from Thunderbird. I have another Macbook Pro with 10.5.0 installed: same problem with sending.
    Any help is appreciated.
    rene

    Well, be stumped I did all that, but to be sure, I did it again:
    I have a lot folders with subfolders and they are shown under my account name.
    I created a new folder "test" in my IMAP account and designated it to be the new "Sent" folder. It replaces my previous Sent folder in the group Inbox, Drafts, Trash. My previous Sent folder now appears under my account name as a "normal" folder.
    I send a message and the Activity monitor says: +"Delivering message: copying message"+. After a minute Mail is done. I check my (new) "Sent" folder and it's empty. I double check in webmail: it's empty.
    So I go to the Finder and look in my IMAP folder: <user>/Library/Mail/<IMAP-account>/test.imapmbox and there is no folder "Messages", only Info.plist.
    Then I try to move a message to the "Sent' folder: for a minute the Activity moinor says: Copying messages: copying message" and then Mail prompts: +"The message "testing" could not be+
    +The connection to the server mail.hicetnunc.nl on port 143 timed out"+.
    So it looks like Mail has a problem with the default "Sent" folder: it cannot copy messages to that folder at all! Aha!
    But then I try to move a message to a "normal" IMAP folder: same thing! Mail cannot copy to any folder!
    In both instances Mail says: +"The message "..." could not be be moved to the mailbox "..."+
    +The connection to the server mail.hicetnunc.nl on port 143 timed out"+
    Last thing: I try to move a message to a folder in the same account again. But in the process I quit Mail. I open Mail again and Mail is performing pending operations: copying message. After a while Mail prompts: +"Operation could not be completed. (MFMessageErrorDomain error 1028.)"+ and crashes... I open Mail again and it tries to peform pending operations. Again: an error message and Mail crashes. This keeps going on so I delete the whole account and set it up again. Nothing's changed...
    I can receive and send, but sent messages are not copied to the "Sent" folder and I cannot move messages around within a IMAP account. But TADA!!!: I can move messages from account to account.

  • Sent Messages are not saved in Sent Mailbox

    It was working correctly but suddenly all my sent messages are not saved in the Sent Mailbox. I follow all the Mail Help instructions but nothing seems to work. Hope that someone can help me. I asked for help on december 14 but it was not helpful

    The mailboxes drawer contains all mailboxes under In, Drafts, Sent, Trash and Junk (if you have Junk Mail set to automatic).
    If you have a .Mac or IMAP type account, you also have an account named icon for the .Mac or IMAP type account at the bottom of the mailboxes drawer. It is named by the Account Description you provided/entered for the account under the Account Information tab for the account preferences.
    If you select save Sent messages on the server for a .Mac or IMAP type account, the account's Sent mailbox will be available under the account named icon in the mailboxes drawer along with all other server stored mailboxes.
    To open the account named icon for your .Mac account to reveal the server stored mailboxes including the account's Sent mailbox, select the black triangle beside your .Mac account icon in the mailboxes drawer pointing it down.
    Select the account's Sent mailbox and at the menu bar, go to Mailbox > Use This Mailbox For and select Sent.
    If you deselect store Sent messages on the server for the account preferences, the account's Sent mailbox will be available under Sent in the mailboxes drawer and you can't use "Use This Mailbox For" for mailboxes stored locally on the hard drive. It can only be used for .Mac or IMAP type account mailboxes that are stored on the server.

  • Yosemite Mail preferences are not saved

    Hello,
    I just update my Yosemite to 10.10.3.
    After some problems with Mail, I've been forced to delete container files and enveloppe index file, all is better except that now mail doesn't saved preferences anymore..
    Also, the windows positions are not saved as well...
    Last information: ON my preferences folder, I got only com.apple.mail-shared.plist file, but no com.apple.mail.plist file... Doesn't now if it's normal or not..
    Thanks for your help
    Here is the transcript of my console file:
    14/04/2015 18:00:18,388 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    14/04/2015 18:00:20,841 WindowServer[157]: disable_update_timeout: UI updates were forcibly disabled by application "Mail" for over 1.00 seconds. Server has re-enabled them.
    14/04/2015 18:00:20,856 WindowServer[157]: common_reenable_update: UI updates were finally reenabled by application "Mail" after 1.02 seconds (server forcibly re-enabled them after 1.00 seconds)
    14/04/2015 18:00:21,066 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    14/04/2015 18:00:45,888 WindowServer[157]: WSGetSurfaceInWindow : Invalid surface 1276785923 for window 508
    14/04/2015 18:00:47,693 CoreServicesUIAgent[357]: unexpected message <OS_xpc_error: <error: 0x7fff76035c60> { count = 1, contents =
      "XPCErrorDescription" => <string: 0x7fff76035f70> { length = 18, contents = "Connection invalid" }
    }>

    But should I see a com.apple.mail.plist file ?
    No, not in Yosemite.
    Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore is not, in itself, a solution.
    First, empty the Trash, if possible.
    Triple-click anywhere in the line below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) 2>&- | wc -l | pbcopy
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Paste into the Terminal window by pressing command-V. The command may take a noticeable amount of time to run.
    Wait for a new line ending in a dollar sign ($) to appear.
    The output of the command will be a number. It's automatically copied to the Clipboard. Please paste it into a reply.
    The Terminal window doesn't show the output. Please don't copy anything from there.

  • Mail settings are not saved any more

    Hi,
    after my mailbox structure has crashed, I tried to reset Mail as explained in this answer: https://discussions.apple.com/message/22302114#22302114
    After restarting Mail all settings were deleted (as expected) and I set up my accounts and settings again. Then I recognized that the settings are not saved any more. I tried some times but Mail didn't save the settings.
    I hope there is a chance to fix this problem.
    Thanks for help.

    Thanks for linked document but I find it funny and someone rude that the article assumes that EVERYONE knows the lingo used - i.e. Profile Folder is in "%APPDATA%\Mozilla\" . Where the hell is that???? Jesus, it's much easier to switch to Chrome.

  • What is the command to verify the configuration that are not saved or sent to local controllers?

    Q: What is the command to verify the configuration that are not saved or sent to local controllers?
    A: We can execute the command that is shown in below image to check the status of the configuration that has been made.
    Note: For example I made changes to the default VAP profile and executed the command "show master-configpending" which shows the pending configuration to be saved/sent to local controllers.

    But that jar file loads without images and icons when it is in other directory.Images should be accessed via a URL rather than using a filename because they will exist as entries in the jar archive not as files. Typically this URL would be obtained by using the Class method [getResource()|http://java.sun.com/javase/6/docs/api/java/lang/Class.html#getResource(java.lang.String)]. There are details in this [Java World article|http://www.javaworld.com/javaworld/javaqa/2002-11/02-qa-1122-resources.html].

  • Safari 8 extensions are not saved

    Hi,
    on Yosemite with Safari 8 installed, extensions are not saved.
    When installing extensions they work. However, when I restart safari the are gone. They are still in ~/Library/Safari/Extensions but not activated and not shown in the extensions tab in the settings.
    Any ideas who to solve this issue?
    Thanks

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing' '464843899 1233118628' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Maybe you are looking for