SEO Metadata options not display in admin panel issue.
SEO Metadata options not display in admin panel issue.
Hi there,
Not much information or detail there.
If the New meta option on pages is what you are refering to then the site in question is likely not been upgraded to that beta feature. Only partners who have access to beta options under settings can access that to upgrade.
Similar Messages
-
Solaris 10 - Installation - Networked Option not display- RTL 8139 NIC Card
Hi,
when i installing Solaris, the Networkd (Yes/No) option not display. In my PC (x86) RTL 8139 Networkd Card is installed. Please advice, how can i enable Networked option and docs says that Solaris-10 Supports RTL 8139 Network card. (Ref: http://www.sun.com/software/solaris/self_help.jsp#installing )
Here pls refer "Network Devices (x86)" Section ).
ThanksI'm not quite sureee, but you might want to run the SDDT test scripts...
http://www.sun.com/bigadmin/hcl/hcts/device_detect.jsp
This you can run from Windows, Linux on the same box, and it will list all the drivers for the hardware that solaris knows about. Inside the tool you can select, whether you want that list for Solaris 10 or SXDE...
Matthias
P.S.: I assume, the driver should be e1000g, but am not quite sure... -
Export Options not displaying in Object Style Options panel
Hi,
I'm trying to create an object style for decorative images as artefacts and set that style for export to PDF, but in the Object Style Options panel the Export Options settings (which I've seen before, bottom left of the panel) are not displayed. Can anyone tell me how I can make them visible? I'm on InDesign CS6.
Thanks, AllyHi changilainen2,
Yes, we are following Adobe Forum!!!
Thanks for your inputs. Actually while implementing this feature we were bit confused if it is of more importance to have these options in the Object Styles. That's why you are finding it missing from there.
But feedback from you and some other folks, made us realize that we should have it in object styles too.
Thanks we'll try incorporating this in the feature.
~Monica. -
PDF (metadata) is not displayed in WIN7 Windows Explorer
The PDF Tab (metadata) does not get displayed (such as: Title, Author, Subject, Keywords) when viewed in Win7 Windows Explorer.
This information is displayed when you view the Properties information via Adobe Reader (v9.4).
This is causing issues with our document management.
When looking around at various blogs this is all I have found:
Adobe implemented in pdfshell.dll an ActiveX interface called IColumnProvider, and Microsoft dropped support for this interface in Windows Vista (replacing it with something called the Property System). So, the PDF Title column feature didn't go away with Windows7, it went away with Windows Vista. http://msdn.microsoft.com/en-us/library/bb776831%2 8VS.85%29.aspx
Has pdfshell.dll been updated to provide the Property System interface that Vista and Windows 7 require? See http://msdn.microsoft.com/en-us/library/bb776859 %28v=VS.85%29.aspx
Has anyone else experience this and is there a valid work around?Hi Bernd,
I use Adobe reader XI and metadata is not very friendly, if i have no metadata in explorer it's annoying but if acrobat reader is showing wrong information in file properties there must be something to do to clarrify the situation.
NB:
What i've tried
Adding keywords with exiftools (works good for other tags), result ok when viewing properties with evince, but not with adobe reader (; subject in place of ; keyword)
So i erased xmp metadata and retried, job done!
Does someone can explain howto solve this problem because i'm not in favor of deleting adobe pr*sm informations
http://www.adobe.com/products/xmp/index.html
What i found is for myself => RTFM as extracting the tags should be done with the -g (with group) option to avoid problems when writing back.
Result is ok no more mix.
Thanks for reading,
Gilles -
Photoshop Menus/Options not displaying correctly
I've just installed photoshop cs6 and many of the options are not displaying correctly. I've included two screenshots as examples.
I'm running Windows 7 64 bit and Nvidia GeForce GT330M graphics. I've updated the graphics driver to the latest version which made no difference.
Any help would be much appreciated as much of the functionality is currently off limits.Either you have a bad install of Photoshop, or some other app/utility on your system is messing up basic UI drawing (Windowblinds used to do that).
-
Site CFC's not displaying in component panel
Hi there.
I've created cfc's manually and they do not show up in
Dreamweaver's componet panel, nor does the folder they were saved
to (also created manually).
When I look in the Bindings panel after opening a cfm page
that calls a cfc with a query in it, the cfc is not displayed
either.
If I create a cfc through Dreamweaver and save it to the same
folder, the cfc is displayed in the Bindings panel and I'm able to
use the Server Behaviors panel to output the query.
So it looks to me there is some process that registers the
cfc (and location) when Dreamweaver creates the cfc.
Anyone know if there is a file I can update somewhere or a
process for registering cfc's created manually or outside of
Dreamweaver.
The site works fine and testing server is set up properly.
ThanksDoes the little, blue, circle arrow in the upper right corner
of the
Components panel that refreshes the CFC list do anything for
you? -
Mod date not displaying in Files panel Dreamweaver CC
After upgrading to Dreamweaver CC, on OS X Mtn Lion, my Files pane will not display the Modification Date for both local and remote files. The column is there, but it's blank. I have tried hiding and showing that column in the Sites setup, but that did not work. Any ideas?
I can confirm that the solution posted by crockej does indeed work, I am not by any means saying that it is a perfect solution, and am sure that it is not the actual fix, but it does work, I landed up having to add JPG,GIF,PNG,PDF,SWF,FLA,ICO,SWZ,MPR,PSD,XLSX,INDD,AI all to fy file list and although this was 90% of the missing icons fixed, it still requires more like m4v etc.
Think of this as more of a temporary solution to the problem, but it does work.
This is what my /Users/XXXXX/Library/Application Support/Adobe/Dreamweaver CS5.5/en_US/Configuration/Extensions.txt file looks like now.
HTM,HTML,SHTM,SHTML,HTA,HTC,XHTML,STM,SSI,JS,JSON,AS,ASC,ASR,XML,XSL,XSD,DTD,XSLT,RSS,RDF, LBI,DWT,ASP,ASA,ASPX,ASCX,ASMX,CONFIG,CS,CSS,CFM,CFML,CFC,TLD,TXT,PHP,PHP3,PHP4,PHP5,PHP-D IST,PHTML,JSP,WML,TPL,LASSO,JSF,VB,VBS,VTM,VTML,INC,SQL,JAVA,EDML,MASTER,INFO,INSTALL,THEM E,CONFIG,MODULE,PROFILE,ENGINE,SVG,JPG,GIF,PNG,PDF,SWF,FLA,ICO,SWZ,MPR,PSD,XLSX,INDD,AI:Al l Documents
HTM,HTML,HTA,HTC,XHTML:HTML Documents
SHTM,SHTML,STM,SSI,INC:Server-Side Includes
JS,JSON:JavaScript Documents
XML,DTD,XSD,XSL,XSLT,RSS,RDF:XML Files
LBI:Library Files
DWT:Template Files
CSS:Style Sheets
ASP,ASA:Active Server Pages
ASPX,ASCX,ASMX,CS,VB,CONFIG,MASTER:Active Server Plus Pages
CFM,CFML,CFC:ColdFusion Templates
AS:ActionScript Files
ASC:ActionScript Communication Files
ASR:ActionScript Remote Files
TXT:Text Files
PHP,PHP3,PHP4,PHP5,TPL,PHP-DIST,PHTML:PHP Files
LASSO:Lasso Files
JSP,JST:Java Server Pages
JSF:Fireworks Script
TLD:Tag Library Descriptor Files
JAVA:Java Files
SQL:SQL Files
ASX:Windows Media Advanced Stream Redirector
WML:WML Files
EDML:EDML Files
VBS:VBScript Files
VTM,VTML:VTML Files
SVG:Scalable Vector Graphics Files
Thanks to crockej for finding this semi solution for now.
Looking for Knysna Accommodation? -
HT4623 Unable to find software update option not displaying in my ipad
Software update not displaying in ipad2.how to update the same.pls help
Go back to the article you asked this question from, ignore the instructions for updating it wirelessly, scroll down, and follow those for updating it from iTunes on a computer.
(93238) -
Korean font not displaying correctly. Internationalization Issue
Hello,
I'm not sure if this is an internationalization issue but I have an Adobe Air project that isn't displaying Korean correctly. I basically have created a MovieClip in Flash CC with a textfield child. When this movieclip is instanced in Air, it's text is dynamically assigned from a web service. The font used works fine except for Korean so we had to switch fonts when using Korean text. This is where things get interesting. If I try to programmatically change the textformat.font to use the Korean font, the font switches but just the Korean characters aren't supported. However if I set the textfield's font to the Korean one in Flash CC, everything displays fine. The font is embedding the same in both instances and is including 'All' characters.
I'm not sure if this is a bug or if I have to add a flag for Korean support somewheres in the build settings. I've created work around for now which has two textfields, one with the font we need and one for korean only. As the data from the webservice is parsed it detects for Korean characters in the string and if it finds them it makes sure the Korean textfield is used. Kind of a dirty way to do it but it doesn't seem to like changing the font family around.
Anyone else notice this?It's the latest AIR 15 SDK with the Flex framework.swc and framework_fb.swf added for binding support
I overwrote the code since it was only a couple lines but here's what I was doing for the way that broke
var tf : TextFormate = this._sknPageShield.pageName.getTextFormat();
tf.font = "Arial Unicode MS";
this._sknPageShield.pageName.setTextFormat(tf);
The font changes because english characters showed up, however even though I click embed all fonts, korean characters do not display. I have to set the font on the textfield using the Flash CC tools and it works fine. -
Page Thumbnails not displaying in Pages Panel
Hi all,
Hopefully a quick question...I've searched through the Forum and not spotted a similar issue.
I have a user who is experiencing an unusual issue in InDesign CS6 - Page Thumbnails aren't displaying in the Pages Panel (such that the panel is completely blank - no new page icon etc.), and Swatches aren't displaying in the Swatches Panel (default swatches or new swatches - the panel is completely blank). I've checked all of the Panel Display options, and have toggled the thumbnail display size up/down, and on/off to no avail. This problem is also non-document specific, it's happening on all documents either previously saved or freshly created. I've also tried multiple workspaces and that hasn't helped.
I've also tried binning the preferences and this hasn't helped...
Any thoughts where to start? My hunch is possibly plugins not working/missing, but I'm not sure what/where to check.
Any help would be very much appreciated...
AlI hate to have to bump an old topic, but replacing my prefs doesn't work either. Tried restarting the computer too. Nothing really works and I hate to have to waste time reinstalling when I doubt that would help at this point. (hates windows).
InDesign CS6 (version 8.0)
Windows 7 - 32-bit -
LR4 Volumes / Hard Drives not displayed in Folders Panel
I recentely upgraded to LR4.1 and it seems to have done something strange with my Folders. As you can see in the earlier version all of my harddrives are displayed as panel items in the folders panel. However now it's only displaying the boot drive and i have to drill down to the volumes folder to get to my hard drives..This is pretty annoying since i work on multiple hard drives.
I have read in earlier versions that people found a workaround by using the "Promote Subfolders" option until all drives were displayed. However this option doesn't seem to be in LR 4. None of my hard drives are compressed, and they are all internal. Can anyone offer any assistance or suggestions..
It may be worth noting that when I went to create a new catalog it didnt show any hard drives begin with.
Original Display of the Folders Panel
Current Display of the Folders Panel - as you can see only one drive is displaying.
I am running Mac Os X Lion 10.7.4, LR 4.1This has been resolved and here's what I did...
I right clicked the top-level folder and clicked "hide this parent".
Repeated the step until all folder were gone. Yet th files still remain.
Restarted Lightroom, and Viola!! All Hard Drive Panels are now back
Thanks Dorin for pointing me in the right direction! -
MMS Message turn on off option not displaying
Hi,
I am a iPhone user for about 3-4 yrs now. I have a black 16 Gig iPhone 4 with the latest iOS 7.0.3. I rarely send MMS messages though but needed to send one yesterday only to realize that I can't do that. How did I realized this that I added a photo from my phone and then added the contact to which i wanted to send the msg. Upon clicking Send, i got the message "Cannot Send Message - MMS Messaging needs to be enabled to send this message". So then went to the settings thinking my MMS settings might have got turned off. Settings -> Messages and what I see is that under SMS/MMS -> MMS Messages -> On/Off -> This option is NOT AT ALL displayed there.
What I see on the screen is
1. iMessages (turn on/off is displayed)
2. Send Read Receipts
3. Send as SMS
4. Send & Receive
Then under SMS/MMS settings
5. Show Subject Field
6. Character Count
7. Blocked
That's all. No "MMS Messages On/Off" option displayef. Ideally it should be available before "Show Subject Field" option, isnt it?
Then I tried few settings but resulted in no benefit. I tried to reset network settings, tried to turn Wi-Fi on/off then turn 3G on/off, Carrier settings on/off. But nothing worked. Last option as suggested on the forum is to RESET as a new phone. But I dont want to lose my current app settings, especially all the game settings and statuses.
Please help here.
Regards,
KiranHi,
Thanks for your quick reply to my post. I am currently in India and am on the Idea Cellular network. Well there does not seem to be any problem with my internet settings (both GPRS & 3G) because I use 3G internet with full speed and recently inquired and pushed the APN settings again for MMS. The mms on/off itself is not getting displayed in first place, forget turning it on or off.
Thanks for your response, waiting for a solution hat will work..
Regards,
Kiran -
BI Content option not displayed in RSA1
We are using BI 7.0 SP12 with BI Content 703 SP5. I am not able to see "BI Content" option in RSA1 in our development system. We activated several BI content objects before in the same system and we used to see "BI content" option before.
I checked the installed components and it is showing that BI_CONT 703 SP5 was installed. When I try to run Goto -> Install Business content from menu, I am getting ASSERTION_FAILED runtime errors.
I tried running "RSOR" and "RSORBCT" tcodes and it is going directly to transport collection screens.
Also when ever we are collecting objects for transport, they are going to D (SAP Delivery) version. When transport request is imported into QA system, the objects are going directly to BI content "D" version there (as opposed to "A" version).
Any ideas on how I can get BI Content option enabled in development system and fix the issue with transports. Thanks in advance for any help on this issue.Apply SP-15
Note 1070452 - Transfer of technical objects in BI Content
Hope it Helps
Chetan
@CP.. -
States are not displaying in the panel
Thank you!!!!!!!!!!!!!!!!!!
I don't know if this is related or not, but I found this Fireworks Help page regarding blank panels:
http://helpx.adobe.com/fireworks/kb/blank-panels-fireworks-cs5-cs5.html
From your graphic, I can't quite tell if there's something wrong with the canvas, too, in addition to the panel being blank. -
Font Title Not Displaying in Character Panel Font Menu
Just updated to OS X Yosemite and noticed that the font titles don't display in the Character Panel > Font Menu. However, they do display when rolled over with the cursor. This is only happening in Illustrator. All other Adobe apps are correctly displaying font titles. Anyone else having this problem?
Using Adobe Illustrator CS5.1 / Mac OS X Yosemitefonts, björn, scott,
Unless three step reinstallation helps, you may wish to roll back from Yosemite and wait to see whether the issues will be solved and reported as such.
Weeding out in older plugins seems to have helped some in some cases. It also seems that JAVA Runtime may be involved, for some it seems to help to roll back to an ealier version, for others to update to the newest.
All the above is more or less hearsay so far, with no definite final confirmation.
In any case, there is something to be sorted out by someone.
Maybe you are looking for
-
Setting up a printer on a Windows Mac Network
I have a small XP and MAC OSX network and have one shared (via Print Server) Epson printer, When I try to configure the Epson from the MAC I get all sorts of problems, so gave up. I have now configured the Printer as SHARED on one of the XP PC's and
-
CAn i cuse an external hard drve in imovie?
i have a portabe brand new western digital hard drive that has fat32 system on it. it does not run via firewire cable rather through usb2 port! can i use this hard drive in imovie 08?
-
I have a Macbook 10.5.5 with: Model Name: MacBook Model Identifier: MacBook4,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.4 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 3 MB Memory: 2 GB Bus Speed: 800 MHz I wanna go get th
-
OS 10.5.4 Updates
Can anyone out there tell me why Apple hasn't posted the iTunes 7.7.1 update on their site yet. I usually download the update and save it to a backup disc for obvious reason but this one so far is a no go. Is it just a lag in getting it posted or is
-
Solution Manager documentation
We are planning to use documentation management functionality to upload all our documents (blueprints, config, test plans etc) in Solution manager. We have a big repository of documents that need to the uploaded. Is there a recommended way to mass up