SEPA Direct Debit XML file error
Hello,
we've set a Z version of CGI_XML_DD tree for SEPA direct debit.
Different payment proposals have been successfully created in F110.
Most of the XML file generated from F110 have been accepted by banks with no problem.
But in one specific file, we've got an error that I'm not able to interpretate. As it's XML, I'm not sure if this is the right place to post this message, but as it's created in SAP throught this format...
Could you please tell me what's wrong in here?:
Error, see line 1:
Element '{urn:iso:std:iso:20022:tech:xsd:pain.008.001.02}Dbtr': This element is not expected. Expected is one of ( {urn:iso:std:iso:20022:tech:xsd:pain.008.001.02}UltmtCdtr, {urn:iso:std:iso:20022:tech:xsd:pain.008.001.02}DbtrAgt ).
I've compared this wrong XML file with correct ones, and everything looks in order...
Thank you
Solved.
This error came because creditor has no SWIFT code informed, and no mandate.
As per requirement, those flags where not selected in payment method, so no error message was shown during the payment proposal.
Similar Messages
-
SEPA direct debit file not generated
Hi all!
SBO 8.81 PL08, Localization: Austria
I tried to generate a SEPA direct debit file. All preparations are done according to the documents from the landing page (MandatID, Date of signature, etc.). The file was not generated because of the following error message in payment run window:
In German:
I'm not sure which value is missing and which field in SBO has to be filled. I hope anybody can help. The customer has hundreds of payments, where we have to use SEPA standard.
Thanks in advance,
RobertThe Creditor ID belongs to the field ID No. 2 on General tab in the business partner master data.
Regards, Robert -
Rule BNK_STR_BATCH_RULE_ATTRIB not found -- Error - SEPA Direct Debit --
Hi All,
I am trying SEPA Direct Debit.
I created payment run through F110, and in the log there is a message "Payment run 09/29/2010 ZABK is intended for cross-payment run payment media".
So I ran program SAPFPAYM_MERGE,
I got the message *Rule BNK_STR_BATCH_RULE_ATTRIB not found *
Can anyone please let me know what this error means and what do i do ?
Thanks in advance.
KrishnaSolved: Might help others added following code
**************************Start Add Lines**************
types:
begin of rssm_s_minfo.
include structure rsminfohead.
types: end of rssm_s_minfo.
****************************End Add Lines**************
Start Add Lines *******************
DATA: g_s_minfo TYPE rssm_s_minfo.
****************************End Add Lines************** -
F110 Payment Run: Direct Debit collection file
Hi FI Gurus,
Currently, our Direct Debit Collection file is being created via Transaction F110 during Payment Run. Basically, the Direct Debit file is being uploaded in AL11 after the Payment Run Transaction F110.
Please be informed that in the Printout / Data Medium tab of the F110, two programs are present:
(1) RFFOAVIS_FPAYM
(2) RFFOEDI1
Now, my requirement is to add the u201CPayers Nameu201D after every line item in the file.
With these, I have some questions:
(1) Can the Payers Name be added in the file thru configuration?
(2) How do I do this via Conguration?
Thank you very much!
Best regards.
BrandoHi Brando,
File is generated via payment program format which is in turn linked through Payment method in country.
The same can be done via user exit in the function modules of the existing format or through DMEE.
The first thing can be done using ABAP help, while the second ne is user friendly.
DMEE steps are follows:
(a) Creating a new payment medium format: Use T Code DMEE to make necessary changes in your existing format. There you can add a new field.
(b) Assigning the newly created payment medium format to the payment method: In the Payment method for Country, instead of using Classic payment medium program, use "Payment medium workbench". Assign the new format here.
(c) Variant for payment medium format
(d) Assign selection variant
Regards
Srini -
Parser dimension ACCOUNT's xml file error.
Hi friends,
i manully uploading master data in ACCOUNT dimension.
what i did here, i manually added PARENTH1hierarchy and i changed that column position infront of "ACCTYPE" property. While pasting i might paste on ACCTYPE property & processed ACCOUNT dim.So it gone and disturbed underlying XML file. I checked 3 files XLS,XLT and XML files in UJFS. But XLS & XLT doesn't have ACCTYPE property. So how can i put it back? Any suggestions pls.
Eventhough ACCTYPE dim property defined and existed(under maintain dim property of ACCOUNT dim). when i try to check maintain members data for manually entering data, it not available in columns. when i try to process ACCOUT dim, system saying below error message.
Parser dimension ACCOUNT's xml file error.
How to correct this error.?
Thanks,
Naresh
Edited by: Naresh P on Jan 13, 2011 7:20 AMHi,
It will be better to delete the XML file from UJFS and process your dimension once again. However, it might happen that you are still unable to edit the membersheet. In that case, it will be advisable to take a backup of the member sheet and recreate the same member sheet once again.
Hope this helps. -
Hello, I have CME 8.6 installed on two 2851s and before going into production, I am testing a few phones.
One of my 2851's is creating cnf.xml files for each phone using SEP<Mac address>.cnf.xml and the other one will not and the phones keep booting up with XMLDefault.cnf.xml.
I've looked at both configurations and I can't see what the difference is. Other than not being able to create the SEP<MacAddress>.cnf.xml files, the phones appear to be loading up fine.
One difference I see is the "its" directory is located on system: on the one that creates the cnf files, and the "its" directory is located in flash on the one that doesn't, although I don't know how that matters.
Below is the one that doesn't create the SEP<MACADDRESS>.cnf.xml files for phones:
Current configuration : 2657 bytes
! Last configuration change at 02:12:45 UTC Wed Oct 8 2014
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname RtrPod2
boot-start-marker
boot-end-marker
no aaa new-model
no network-clock-participate wic 3
crypto pki token default removal timeout 0
dot11 syslog
ip source-route
ip cef
ip dhcp excluded-address 20.0.30.0 20.0.30.10
ip dhcp excluded-address 20.0.10.0 20.0.10.10
ip dhcp pool Data
network 20.0.10.0 255.255.255.0
default-router 20.0.10.254
option 150 ip 20.0.30.254
ip dhcp pool Voice
network 20.0.30.0 255.255.255.0
default-router 20.0.30.254
option 150 ip 20.0.30.254
dns-server 8.8.8.8
no ipv6 cef
multilink bundle-name authenticated
voice-card 0
license udi pid CISCO2851 sn FTX1331AJQ1
username cisco privilege 15 password 0 cisco
redundancy
controller T1 0/3/0
controller T1 0/3/1
interface Loopback0
no ip address
interface GigabitEthernet0/0
no ip address
duplex auto
speed auto
interface GigabitEthernet0/0.10
encapsulation dot1Q 10
ip address 20.0.10.254 255.255.255.0
interface GigabitEthernet0/0.30
encapsulation dot1Q 30
ip address 20.0.30.254 255.255.255.0
interface GigabitEthernet0/1
ip address 192.168.5.232 255.255.255.0
duplex auto
speed auto
interface Serial0/0/0
no ip address
shutdown
clock rate 2000000
interface Serial0/0/1
ip address 200.2.0.1 255.255.255.0
ip forward-protocol nd
no ip http server
no ip http secure-server
tftp-server flash:cmterm-7940-7960-sccp.8-1-2.cop.sgn alias cmterm-7940-7960-sccp.8-1-2
tftp-server flash:/Ringtones/DistinctiveRingList.xml alias DistinctiveRingList.xml
tftp-server flash:/Ringtones/Ringlist.xml alias Ringlist.xml
tftp-server flash:P00308010200.bin
tftp-server flash:P00308010200.loads
tftp-server flash:P00308010200.sb2
tftp-server flash:P00308010200.sbn
control-plane
mgcp profile default
telephony-service
no auto-reg-ephone
max-ephones 110
max-dn 288
ip source-address 20.0.30.254 port 2000
system message Branch System
load 7960-7940 P00308010200
max-conferences 8 gain -6
transfer-system full-consult
create cnf-files version-stamp Jan 01 2002 00:00:00
ephone-dn 1 dual-line
number 2000
label Phil Davis
description Branch Office
ephone 1
device-security-mode none
mac-address 0009.E89D.0B4F
username "cisco" password cisco
button 1:1
line con 0
line aux 0
line vty 0 4
login local
transport input all
line vty 5 15
login local
transport input all
scheduler allocate 20000 1000
endHello, and thanks for the good advice. I did try and added the cnf perphone command and ran no create cnf-files and then create cnf-files, but unfortunately its still not making them.
Also, from the other few CME installations I've seen, all of the information is in flash, but for some reason when I xtracted the tar for this CME, it's showing up in system: ? Could that be a problem? Here is what I see:
CompactFlash directory:
File Length Name/status
1 67922508 c2800nm-adventerprisek9-mz.151-4.M8.bin
2 85149696 cme-full-8.0.0.1.tar
3 2942935 apps11.8-5-3TH1-6.sbn
4 503269 cnu11.8-5-3TH1-6.sbn
5 2104751 cvm11sccp.8-5-3TH1-6.sbn
6 340615 dsp11.8-5-3TH1-6.sbn
7 1616686 jar11sccp.8-5-3TH1-6.sbn
8 670 SCCP11.8-5-3S.loads
9 674 term06.default.loads
10 674 term11.default.loads
11 1916 MISCH-1.3.3.SBN
12 900 CP7921G-1.3.3.LOADS
13 900 CP7925G-1.3.3.LOADS
14 674 term42.default.loads
15 674 term62.default.loads
16 670 SCCP42.8-5-3S.loads
17 655 term31.default.loads
18 654 term41.default.loads
19 654 term45.default.loads
20 654 term61.default.loads
21 654 term65.default.loads
22 654 term70.default.loads
23 654 term71.default.loads
24 654 term75.default.loads
25 651 SCCP31.8-5-3S.loads
26 650 SCCP41.8-5-3S.loads
27 650 SCCP45.8-5-3S.loads
28 650 SCCP70.8-5-3S.loads
29 650 SCCP75.8-5-3S.loads
30 61 SCCP69xx.8-5-3-0.loads
31 131470 Desktops/320x212x12/CampusNight.png
32 80565 Desktops/320x212x12/CiscoFountain.png
33 8156 Desktops/320x212x12/CiscoLogo.png
34 138278 Desktops/320x212x12/FOUNTAIN.PNG
35 740 Desktops/320x212x12/LIST.XML
36 109076 Desktops/320x212x12/MorroRock.png
37 108087 Desktops/320x212x12/NantucketFlowers.png
38 10820 Desktops/320x212x12/TN-CampusNight.png
39 9657 Desktops/320x212x12/TN-CiscoFountain.png
40 2089 Desktops/320x212x12/TN-CiscoLogo.png
41 7953 Desktops/320x212x12/TN-Fountain.png
42 7274 Desktops/320x212x12/TN-MorroRock.png
43 9933 Desktops/320x212x12/TN-NantucketFlowers.png
44 740 Desktops/320x212x16/LIST.XML
45 740 Desktops/320x216x16/LIST.XML
46 8224 Ringtones/Analog1.raw
47 8307 Ringtones/Analog2.raw
48 5280 Ringtones/AreYouThere.raw
49 5040 Ringtones/AreYouThereF.raw
50 8206 Ringtones/Bass.raw
51 12240 Ringtones/CallBack.raw
52 16066 Ringtones/Chime.raw
53 8160 Ringtones/Classic1.raw
54 16080 Ringtones/Classic2.raw
55 10800 Ringtones/ClockShop.raw
56 2823 Ringtones/DistinctiveRingList.xml
57 9665 Ringtones/Drums1.raw
58 13610 Ringtones/Drums2.raw
59 15928 Ringtones/FilmScore.raw
60 16244 Ringtones/HarpSynth.raw
61 8245 Ringtones/Jamaica.raw
62 16127 Ringtones/KotoEffect.raw
63 12776 Ringtones/MusicBox.raw
64 8223 Ringtones/Piano1.raw
65 15422 Ringtones/Piano2.raw
66 9360 Ringtones/Pop.raw
67 7200 Ringtones/Pulse1.raw
68 4000 Ringtones/Ring1.raw
69 4000 Ringtones/Ring2.raw
70 4000 Ringtones/Ring3.raw
71 4000 Ringtones/Ring4.raw
72 4000 Ringtones/Ring5.raw
73 4000 Ringtones/Ring6.raw
74 4088 Ringtones/Ring7.raw
75 495 Ringtones/Ringlist.xml
76 10858 Ringtones/Sax1.raw
77 14233 Ringtones/Sax2.raw
78 16100 Ringtones/Vibe.raw
79 8095286 apps37sccp.1-3-4-0.bin
80 2942935 apps31.8-5-3TH1-6.sbn
81 2935993 apps42.8-5-3TH1-6.sbn
82 2935993 apps45.8-5-3TH1-6.sbn
83 2935993 apps75.8-5-3TH1-6.sbn
84 2933329 apps41.8-5-3TH1-6.sbn
85 2933329 apps70.8-5-3TH1-6.sbn
86 2599169 APPSH-1.3.3.SBN
87 2591877 APPS-1.3.3.SBN
88 2118620 SYSH-1.3.3.SBN
89 2103754 cvm70sccp.8-5-3TH1-6.sbn [invalid checksum]
90 2101414 cvm41sccp.8-5-3TH1-6.sbn [invalid checksum]
91 2100804 cvm45sccp.8-5-3TH1-6.sbn [invalid checksum]
92 2100554 cvm75sccp.8-5-3TH1-6.sbn [invalid checksum]
93 2100286 cvm31sccp.8-5-3TH1-6.sbn [invalid checksum]
94 2099070 cvm42sccp.8-5-3TH1-6.sbn [invalid checksum]
95 2083047 SYS-1.3.3.SBN [invalid checksum]
96 1939872 WLANH-1.3.3.SBN [invalid checksum]
97 1906272 SCCP69xx.8-5-3-0.zz [invalid checksum]
98 1892036 GUIH-1.3.3.SBN [invalid checksum]
99 1887312 jar75sccp.8-5-3TH1-6.sbn [invalid checksum]
100 1882934 jar45sccp.8-5-3TH1-6.sbn [invalid checksum]
101 1848343 GUI-1.3.3.SBN [invalid checksum]
102 1828410 jar70sccp.8-5-3TH1-6.sbn [invalid checksum]
103 1756328 jar42sccp.8-5-3TH1-6.sbn [invalid checksum]
104 1628021 jar41sccp.8-5-3TH1-6.sbn [invalid checksum]
105 1616425 jar31sccp.8-5-3TH1-6.sbn [invalid checksum]
106 1379535 WLAN-1.3.3.SBN [invalid checksum]
107 939293 TNUXH-1.3.3.SBN [invalid checksum]
108 896477 TNUX-1.3.3.SBN [invalid checksum]
109 537925 dsp41.8-5-3TH1-6.sbn [invalid checksum]
110 537925 dsp70.8-5-3TH1-6.sbn [invalid checksum]
111 524969 cnu45.8-5-3TH1-6.sbn [invalid checksum]
112 524917 cnu42.8-5-3TH1-6.sbn [invalid checksum]
113 524876 cnu75.8-5-3TH1-6.sbn [invalid checksum]
114 503753 cnu31.8-5-3TH1-6.sbn [invalid checksum]
115 500084 cnu70.8-5-3TH1-6.sbn [invalid checksum]
116 499644 cnu41.8-5-3TH1-6.sbn [invalid checksum]
117 496521 music-on-hold.au [invalid checksum]
118 340615 dsp31.8-5-3TH1-6.sbn [invalid checksum]
119 340615 dsp42.8-5-3TH1-6.sbn [invalid checksum]
120 340615 dsp45.8-5-3TH1-6.sbn [invalid checksum]
121 340615 dsp75.8-5-3TH1-6.sbn [invalid checksum]
122 264368 DSP69xx.0-0-0-3.zz [invalid checksum]
123 165355 B016-1-0-3.SBN [invalid checksum]
124 146463 B015-1-0-3.SBN [invalid checksum]
125 44896 BOOT69xx.0-0-0-14.zz [invalid checksum]
126 11601 CME-8-0-Full-Readme-v.1.0.txt [invalid checksum]
127 5134 7970-71-75-Background-readme-v1.txt [invalid checksum]
128 1916 MISC-1.3.3.SBN [invalid checksum]
129 4118 GUI/admin_user.html [invalid checksum]
130 677820 GUI/admin_user.js [invalid checksum]
131 1029 GUI/CiscoLogo.gif [invalid checksum]
132 639 GUI/CME_GUI_README.TXT [invalid checksum]
133 953 GUI/Delete.gif [invalid checksum]
134 16344 GUI/DOM.JS [invalid checksum]
135 864 GUI/downarrow.gif [invalid checksum]
136 6315 GUI/ephone_admin.html [invalid checksum]
137 4558 GUI/LOGOHOME.GIF [invalid checksum]
138 3978 GUI/normal_user.html [invalid checksum]
139 78428 GUI/normal_user.js [invalid checksum]
140 1347 GUI/Plus.gif [invalid checksum]
141 843 GUI/SXICONAD.GIF [invalid checksum]
142 174 GUI/Tab.gif [invalid checksum]
143 2496 GUI/telephony_service.html [invalid checksum]
144 870 GUI/UPARROW.GIF [invalid checksum]
145 10230 GUI/xml-test.html [invalid checksum]
146 3412 GUI/xml.template [invalid checksum]
147 12 OS79XX.txt
148 130552 P00308010200.bin
149 461 P00308010200.loads
150 708448 P00308010200.sb2
151 130956 P00308010200.sbn
152 703535 cmterm-7940-7960-sccp.8-1-2.cop.sgn
[239789964 bytes used, 281983088 available, 521773052 total]
509544K bytes of ATA CompactFlash (Read/Write)
RtrPod2#show telephony-service tftp-bindings
tftp-server system:/its/united_states/7960-tones.xml alias United_States/7960-tones.xml
tftp-server system:/its/united_states/7960-font.xml alias English_United_States/7960-font.xml
tftp-server system:/its/united_states/7960-font.xml alias English_United_States/7920-font.xml
tftp-server system:/its/united_states/7960-dictionary.xml alias English_United_States/7960-dictionary.xml
tftp-server system:/its/united_states/7960-kate.xml alias English_United_States/7960-kate.xml
tftp-server system:/its/united_states/7960-kate.xml alias English_United_States/7920-kate.xml
tftp-server system:/its/united_states/SCCP-dictionary.xml alias English_United_States/SCCP-dictionary.xml
tftp-server system:/its/SEPDEFAULT.cnf alias SEPDefault.cnf
tftp-server system:/its/vrf1/XMLDefault.cnf.xml alias XMLDefault.cnf.xml -
Data migration and SEPA direct debit structure B2B
Hi Gurus
we are starting SAP roll-out at the company that already has SEPA direct debit B2B process with their customers. This is a recurring B2B process. In their existing Erp system the customers have already SEPA mandate Reference.
We migrated the customer master data from thier legacy system and we transferred external SEPA mandate reference.
Each customer has information about the first run , which they need to retain in the SAP system. To which field the data from the first run should be migrated ?
When they start using SAP SEPA direct debit procudure this will not be the FRST, but RECUR run. How to modify the DMEE structure and assign the first payment run ID to the field EndtoEndID.
I craeted the Z DMEE structure , but first i need to know to which field this information should be written.
Do you have simular issues?
Thank you and kind regardsHI Gordana
We have exactly the same issue. I just analyse the dependencies, when First is set. If I make the migration of a already used mandat, I plan to update the field by a hard update, so that first is not taken by the system after migration the sepa mandate.
BR
Niels -
Create prov.xml file error 14 or 28
When I wan’t to create a prov.xml file for Muse to activate computers in the Enterprise I get the 14 error, the comandline I use is:
adobe_prtk --tool=VolumeSerialize --generate --serial=xxxx-xxxx-xxxx-xxxx-xxxx-xxxx --leid=Muse-1.0-Win-GM
Copyright 2012 Adobe Systems Incorporated
All rights reserved.
Return Code Code = 14
When I use the comandline with provfilepath I get the error 28;
adobe_prtk.exe --tool=VolumeSerialize --generate -- serial=xxxx-xxxx-xxxx-xxxx-xxxx-xxxx --leid=Muse-1.0-Win-GM --provfilepath=C:\temp\prov.xml
Copyright 2012 Adobe Systems Incorporated
All rights reserved.
Return Code Code = 28
What goes wrong, any help would be appreciated
TIA.
HarmenHello Harmen, please check the %temp%\oobelib.log after completing your first command. This will reveil more details.
@Adobe:
I do get the same error code 14 (and then 19) when running the above command for leid=DesignSuiteStandard-CS6-Win-GM
del "%temp%\oobelib?.log" /q /s
%~dp0adobe_prtk --tool=VolumeSerialize --generate --serial=xxxxxxxxxxxxxxxxxxxxxxx --leid=DesignSuiteStandard-CS6-Win-GM --regsuppress=ss --eulasuppress --locales=de_DE --provfilepath=%temp%
ren "%temp%\oobelib.log" oobelib1.log
%~dp0adobe_prtk --tool=VolumeSerialize --stream --provfile=%temp%\prov.xml
ren "%temp%\oobelib.log" oobelib2.log
Permissions are correctly set for \SLStore and \SLCaches. Prov-File-Path was set to %temp% and is accessible/writable. Scripts were run with elevated privileges.
In Adobe's damn bad documentation I found a hint that Adobe Application Manager (now Adobe Creative Cloud Client) is required for the VolumeSerialize commands to work* but in my case this didnt change a thing...
* p.135 http://wwwimages.adobe.com/content/dam/Adobe/en/devnet/creativesuite/pdfs/DE/AdobeApplicat ionManagerEnterpriseEditionDep…
further reading chapter "Volumenserialisierung des Pakets" Creative Cloud-Hilfe | Verwenden von Adobe Provisioning Toolkit Enterprise Edition
Adobe advises to catch the %temp%\oobelib.log which includes more information. However make sure to backup this file after each run of adobe_prtk because it gets overwritten :/
My results:
- step 1 "generation of prov.xml" ends with OOBELIB: SN validated for AAMEE Mode; stat = 27; Adobe PRTK: Failed to validate the serial number => Code 14
- step 2 "activation" ends with "invalid prov.xml" because of step 1 => Code 19
Once I set provfilepath to c: or c:\ step one quits with return code 28 (sufficient rights are set though). Whenever I omit the provfile-Parameters in step 1 and 2 I still receive return code 14 and 19.
Btw. another hint: check logs when doing a single command line serialization... For me I get loads of errors and end up with a trial mode and register popup
adobe_prtk --tool=Serialize --leid=DesignSuiteStandard-CS6-Win-GM --serial=xxxxxxxx [email protected]
Please help me out
PS: We're on ETLA (OTH Regensburg, former University of Applied Sciences, Ratisbon) -
XML file error while loading import manager
Hi all,
I am new to MDM.
I have archive repository(.a2a file),xsd files,import maps and export maps.I have unarchived the repository in console and I am trying to load import manager by selecting the file type as XML schema, client system as MDM, XMl schema name and file name as XML file of given XSD in import manager folder of server.
I am getting error like "failed to parse XML file".
Please help me out regarding this.
Thanks in advance.
Ravi.Hi ravi,
Is it MSXML 4.0 SP2 parser?
<a href="http://www.microsoft.com/downloads/details.aspx?FamilyID=3144b72b-b4f2-46da-b4b6-c5d7485f2b42&DisplayLang=en">http://www.microsoft.com/downloads/details.aspx?FamilyID=3144b72b-b4f2-46da-b4b6-c5d7485f2b42&DisplayLang=en</a>
Try installing this and let me know.
Thanks and Regards,
<b>Sagar Sonje</b>
Message was edited by:
Sagar Sonje -
Issue to load data from database to XML file. error: ODI-40768
Hi,
While I am trying to load data from database to XML following error is appearing.
ODI-1228: Task TEST_XML_DATA (Integration) fails on the target XML connection MyLOCALXSD.
Caused By: java.sql.SQLException: ODI-40768: Could not save the file <default>:C:\DATA_FILE\www.xml because a class java.io.IOException occurred and said: The filename, directory name, or volume label syntax is incorrect
at com.sunopsis.jdbc.driver.xml.SnpsXmlFile.writeToFile(SnpsXmlFile.java:751)
at com.sunopsis.jdbc.driver.xml.SnpsXmlConnection.internalExecute(SnpsXmlConnection.java:769)
at com.sunopsis.jdbc.driver.xml.SnpsXmlPreparedStatement.execute(SnpsXmlPreparedStatement.java:46)
at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:166)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
at java.lang.Thread.run(Thread.java:662)
jdbc url: jdbc:snps:xml?d=C:\test_xsd.xsd&s=TESTSQL&re=employeesX&ro=true
physical schema: TESTSQL
Knowledge modules are:
LKM: LKM SQL to SQL
IKM: IKM XML Control Append
CKM: CKM SQL
Parameters set are:
CREATE_XML_FILE: true
XML_PATH:<default>:C:\DATA_FILE\www.xml
I have tried to change the directory path but error is still there.
Could some one please help me to resolve the issue?
Regards,
user1672911Hi,
The trouble in "<default>:" - if you set XML_PATH as C:\DATA_FILE\www.xml instead <default>:C:\DATA_FILE\www.xml- it will work correctly.
Greetings,
Eugene -
Xml file error in file adapter
Hi Experts.
In my sceanrio i am Using File dapter. this adapter pick the Xml file.
here my client provieded sample Xml file (this Xml file don't have the Url and Xml version).
I am getting mapping error. nothing is wrong with mapping.
Client proveded.
- <MESSAGE>
<TABLENAME>ZMPSXMSGDET</TABLENAME>
<ACTION>I</ACTION>
- <RECORD>
<XMTYPE>ID</XMTYPE>
<XMID>2</XMID>
<ACCOUNTNUMBER />
<CONSUMERNAME />
<POSTCODE />
<ACTIONDATE />
<ACTIONTYPE />
<USERID />
<SENDINGPARTYTYPE />
<DELIVERYMETHOD />
<INTENDRECIPIENT />
<SUBMITDATE />
<BILLINGOPTION />
<CONTENTFORMAT>XML</CONTENTFORMAT>
<NEWSUPPLIERID />
<COMPRESSED>Y</COMPRESSED>
<NEXTINVOICEDATE />
<UPDATEDON />
<UPDATEDBY>SonicMQ</UPDATEDBY>
<RAWMSG_LEN>33366</RAWMSG_LEN>
<DATA>UEsDBBQACAAIAC6kKDoAAAAAAAAAAAAAAAArAAAAS</DATA>
</RECORD>
</MESSAGE>
I am getteting blow error message: in SXMB_MONI
*<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
*- <!-- Request Message Mapping*
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_ZMPSXMSGDET_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_ZMPSXMSGDET_: Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Edited by: srinivasreddy p on Jun 12, 2009 10:28 AMHi,
I am getting following error in recvier proxy.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Inbound Proxy
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">PARSE_APPLICATION_DATA</SAP:Code>
<SAP:P1>Request Message</SAP:P1>
<SAP:P2>CX_ST_MATCH_ELEMENT</SAP:P2>
<SAP:P3>/1SAI/TXS17E9317D0B8ACCD31C62</SAP:P3>
<SAP:P4>XML Bytepos.: 12 XML Path: MESSAGE(1) Error Text: System expected the element 'MT_ZMPSXMSGDET_RECV'</SAP:P4>
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during XML => ABAP conversion (Request Message; error ID: CX_ST_MATCH_ELEMENT; (/1SAI/TXS17E9317D0B8ACCD31C62 XML Bytepos.: 12 XML Path: MESSAGE(1) Error Text: System expected the element 'MT_ZMPSXMSGDET_RECV')) System expected the element 'MT_ZMPSXMSGDET_RECV'</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error> -
HTTPService call to XML file error
I am getting the "HTTP request error" when I attempt to load
an XML file. I'm setup for PHP web access using MAMP and I'm
attempting access a XML file (LatestAdoptees.xml) located in a
subfolder called Data. I have checked and the subfolder and file
are located both in my src folder and in the MAMP
htdocs/FoxPets-debug folder. I based my code on Ch 21 of Flex 3
Bible. Can anyone tell me where I made the wrong turn?I notice that you have not set resultFormat="e4x". You
really, really want to do that.
Othrwise, you will have a tree of dynamic objects and not
XML. And the converter that does that oftem makes some bad
decisions, over which you have no control.
Tracy -
Struts Config.XML file error
if Error in page (value not entered in textfield) , it will be redirected to a same page with server valid error page . After redirecting javascript,css r not working(means not included)
but it is working when page is first time loaded.
help me what could be the problem?
struts config.xml file
<forward name="success"
path="/jsp-modEmp/success.jsp"
redirect="false"></forward>
<forward name="fail" contextRelative="true"
path="/jsp-modEmp/addempform.jsp"
redirect="false"/>Edited by: K.Ramesh on Jun 5, 2008 6:05 AM
Edited by: K.Ramesh on Jun 5, 2008 6:05 AMThanks for reply..
We r invoking javascript/css using relative path only.
i'm redirecting to the same page only if error happens with including error page
<script language="javascript" type="text/javascript" src="js-modEmp/addEmpval.js">
</script>
<script language="javascript" type="text/javascript" src="js-modEmp/datetimepicker.js">
</script>
<link rel="stylesheet" type="text/css" href="css-modEmp/styles.css"> -
Google won't load, XML file error message
I am getting this error string how do i fix?
This XML file does not appear to have any style information associated with it. The document tree is shown below.
<Error><Code>AllAccessDisabled</Code><Message>All access to this object has been disabled</Message><RequestId>B48ED5AF31CACBE3</RequestId><HostId>X1yuWJjS7Rqnz9kZhgbKplQueFIEin8fkXDqb8KYMAZ6JcFV3P/C/W6gzQxQu6Ax</HostId></Error>Hello,
Where and when are you facing this error ? Also, since when are you facing this error ?
In this case we may need more specific details from you (Sensitive Account related information) for us to Analyse and help you on the same.
We would also recommend to open a new Service Request for us to assist you better on the same. The link below should be helpful for you to open a new Service Request.
http://azure.microsoft.com/en-us/support/options/
Regards,
Neelesh. -
XML file error on second time execution.
suppose i had xml file test1 which have some attributes depicted below. While after creating data sever for test1 xm file and on doing selective reverse external tables are created are
MAPPING,ENGINE,TRNASMISSION,TRIM,MARKET,LINE,BODY,SERIES.
It means the tables are created for the attributes which are empty Or which doesnt have values like BODY,ENGINE etc.
and the attributes which are not empty are contained as columns insdide MAPPING tables such as TOC_ID,MAPPING_ID etc are column names inside MAPPPINGS table.
<MAPPINGS>
<MAPPING_ID>481</MAPPING_ID>
<TOC_ID>9456</TOC_ID>
<MODEL_YEAR>1997</MODEL_YEAR>
<FAMILY>AB</FAMILY>
<ENGINE/>
<TRANSMISSION/>
<TRIM/>
<MARKET/>
<LINE/>
<BODY/>
<SERIES/>
<XT_ID>481</XT_ID>
<LEVEL>1</LEVEL>
</MAPPINGS>
Suppose second time loading of test1 xml file if i recieve data in which engine column is not null
<MAPPINGS>
<MAPPING_ID>481</MAPPING_ID>
<TOC_ID>9456</TOC_ID>
<MODEL_YEAR>1997</MODEL_YEAR>
<FAMILY>AB</FAMILY>
<ENGINE>1 </ENGINE>
<TRANSMISSION/>
<TRIM/>
<MARKET/>
<LINE/>
<BODY/>
<SERIES/>
<XT_ID>481</XT_ID>
<LEVEL>1</LEVEL>
</MAPPINGS>
sice already the MAPPINGS table table is created which doesnt have ENGINE column inside it. so second time load I recive the error .
So it means that if in XML file during the first time load if one attribute is null while at second it is not null a mismatch on the table or column creation occurs.
Is there any solution.
Thanks
Neeraj singh
Edited by: neeraj_singh on Dec 18, 2008 10:43 PMHi
Did you get the solution to this problem? I am having a 'sort of' similar issue.
Am using Oracle table as my source and XML model as the target.
While creating a XML server, instead of giving an XML file , am giving a DTD file.
All the elements of the DTD file after reversing are "tables" and the attributes within those elements are coming as "columns". And after reversing XML model,
ODI is inserting some Primary key and foreign key columns within elements. I think they are coming from"element ref" tag in the DTD.
Now the problem is
1. How do i populate these PK's and FK's? i tried setting default value to them, but its not working. Will it affect my XML file? and moreover i am not populating any of the PK's and FK's from the source and creating multiple interfaces to populate different elements of just one XML file as i am having single Oracle table as the source.
2. After populating the XML model, where will be my resultant XML file. Is it the same location/file as the XML schema. (this XML schema has been specified while creating XML data server).
3. Can you provide some documention if you have (other than the Users guide)
thanks
CJ
Maybe you are looking for
-
Random segfaults when doing an xupdate at the container level
I am having an error where updates to a container are causing segfaults in weird ways. I am on 2.4.16 with the latest patch applied. my query is attempting to mark a node as 'empty'... > for $q in collection('dbxml:/rx.dbxml')//results[text()="http:/
-
Need support to fetch the feild descritpion form th table catsdb
Hello All, iam developing a customizing Hr report fro that i need one filed called takslevel from CATSDB table, the actual data for that field is like k1,l1 in the table,but i wna tto fetch its description,fro ex : thae tasklevel is k1 then text is
-
Need Information on Categories and Templates in Collaboration
Hi, I am new to Collaboration. I want to know about the Categories while creating Room. I have seen that there are 4 categories : 1. default_category 2. category_1 3. category_2 4. category_3 Please give some description about these categorie
-
Pricing Header Condition.
Hello everyone, I want to a add header condition and if I enter any values in there, system should allocate the value to all the line items based on the netprice of each item. Currently I have the following config in V/06: Condition Class: A Conditio
-
How to get Router configurations in java
I want to develop a simple Jjava Swing application that will connect to my router in order to collect basic informations about it's state. Is it possible ? Can anyone HELP me?