Separate audio from video - I want BOTH an audio and video file

Hi,
I would like to separate audio from video - I want BOTH an audio and video file.
I don't think this can be done without additional software, but if it can, pointing me in the right direction would be much appreciated.
Brandon

You need Quicktime 7.6 Pro. Control+J to bring up the property window. In the property window is an extract button. Click on either the video or audio and click to the extract button.
You'll find Quicktime 7 in your Utilities folder. If Quicktime 7 isn't install in the Utilities folder you need to install it from you OS installation disk, in the optional installations folder.
If you don't have Quicktime Pro you need to buy it from the Apple store.

Similar Messages

Hi I want to put photos and videos from my iPhone to my iPad how do I do it please

I Want to put photos and videos from my iPhone to my I pad how do I do it please ?

http://www.wikihow.com/Transfer-Photos-from-iPhone-to-iPad

HT204291 Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Here are the steps for AirPlay:
Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
On your iPhone 4S/5 or iPad 2 or 3, double-click the Home Button to view your recently-used apps.
Swipe all the way to the right to until you see the icon.
Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
Tap the icon to see the list of available AirPlay devices.
Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
Now you should be seeing your iPad/iPhone on your TV.
Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
When you do that you will see an Orange screen
Now click "Done" and play the video you want to watch and it will AirPlay

I've just bought an iPhone 5S in the UK, seems like a big mistake. I have turned off sync to icloud from the phone for both my contacts and calendar, as told on itunes. However, iTunes still says they are synced from iCloud and wont sync to PC, Fix ?

I've just bought an iPhone 5S in the UK, seems like a big mistake, but luckily by law we can return goods, which is exactly what is going to happen if I cant get this to work. This is my business phone, not having it functional can cost me money.
I have turned off sync to icloud from the phone for both my contacts and calendar, as told on itunes. However, iTunes still says they are synced from iCloud and wont sync to my PC, why and how do I fix it so that it doesnt go to iCloud for anything ?
The phone currently has no contacts or calendar information installed.
PC is HP Probook 4730s running Windows 7, Professional, version 6.1.7601 Service Pack 1 Build 7601.

I'm happy you figured it out and just try to keep in mind that not everyone you talk to at support will give the same advice or have the same knowledge. Just like those who contribute to these forums. Sometimes Google is your best friend.
I agree that Apple could probably make it easier, but as of yet prefer security over freedom. (sound famaliar?)
Anyway, if you choose to do so, you can leave feedback here:
Apple.com Feedback
Apple Support Feedback
Developer Feedback
Product Feedback
QuickTime Feedback
Search Feedback

I have my camera (Canon 5D MARK 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images. Aperture put ab

I have my camera (Canon 5D Mark 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images. Aperture put about 700 images in an untitled project folder, but all the images are the JPEGs. What am I missing?
Thanks,
upsjdris

Have you checked your "Import" settings for "Raw&Jpeg" pairs in the "Import" panel?
You can set Aperture to import raw, jpeg, or raw&jpeg.
If you imported Raw&Jpeg, but have set Aperture to use the Jpeg as original, you will see the imported image as Jpeg image, not as a raw image, even if the raw has also been imported. You can switch between Raw and Jpeg originals for selected images from the Photos menu:
Photos > Use Raw as original.
Regards
Léonie

Ipod touch is trying to download a song from itunes and an app from the store. Both are waiting, and won't dowload. Is there a way I can stop them dowloading? Doesn't seem to be an option to

My ipod touch is trying to download a song from itunes and an app from the store. Both are waiting, and won't dowload. Is there a way I can stop them dowloading? Doesn't seem to be an option to

Create a iTune and App Store account without credit card
1. Go to App Store and select a free app
2. Tap INSTALL APP
3. Create New Apple ID
4. Confirm Your Country
5. Agree with Terms and Conditions
6. Fill in your Apple ID and Password (must be a valid email address)
7. Create and answer your secret question e.g. What is the name of my dog?
8. Select NONE for Payment Method
9. Fill in Billing Address i.e. your address
10. Submit application for new Apple ID
11. Wait for verification email
12. When email arrive, verify your account
13. Start downloading your free apps

How do you record video with usb mic and have the audio from garageband be the sound when recording and not just your normal voice but garage band effects for youtube?

How do you record video with usb mic and have the audio form garageband be apart of the video when recording, meaning the audio from garageband and echo and not just your normal voice for youtube post?its not add the garageband audio its just normal voice from mic no effects is going thru?

Hi Life93,
What you describe would be possible by recording your video, then removing the audio from it and adding audio from GarageBand once the video is in iMovie (I presume here that you are using iMovie for your video production. Other applications may need different methods.)
See this thread on how to remove the audio from a clip in iMovie -
Is there a way to separate audio from a video c...
https://discussions.apple.com/thread/1779767
To add audio from GarageBand use this article -
iMovie '11: Add a sound clip to your project
http://support.apple.com/kb/PH2255
Thanks for using Apple Support Communities.
Best,
Brett L

Is it possible to transfer music/videos from one itunes account to a separate one? I need to give my music and videos that I bought a grandchild to her for her ipad.

Is it possible to transfer music/videos from my itunes account to a grandchild (she will need her own account) I bought her music and videos and let her play with my ipod touch. Now she has an ipad.

No you cannot transfer purchases from one account to another account. Apple does not allow it and never has allowed it.
She can use you Apple ID on the device and switch between her ID and your ID, but that can cause problems at times and can become a bit of a pain.

I rented 2 movies on my mini3. I connected my mini3 to my MacBook 7.1 but can't find the movies. The only thing I can access from my mini three are the photos and videos. What steps do I need to know?

I want to watch rented movies downloaded on my mini 3 on my MacBook 7.1, but when I connect the two devices, the movies don't transfer. What steps do I need to take. I can see all the photos and videos from the mini 3 but not the rented movies.

It appears you have a iPad Mini and a MacBook. Assuming that, this
About renting movies from the iTunes Store - Apple Support
says
If you rented the movie on your iOS device or Apple TV, you can’t move it to any other device.
This is the Mac Mini desktop forum

No audio from HDMI output because High Definition Audio Driver cannot start (Envy 17 Quad)

Ever since I first bought this laptop two months ago, the audio from the HDMI output has always been inconsistent. I remember it working a couple times, but there were more times when my audio driver didn't recognize that an HDMI cable was plugged in. Yes, I tried all the obvious: shutting down computer, checking disabled devices in Playback Devices, reinstalling drivers, etc. Now, when I plug an HDMI cable in, the video comes out fine but the IDT High Definition Audio CODEC does not recognize HDMI/my TV. The High Definition Audio Driver says it cannot start, but I could not reinstall nor find a download from HP's website. How can I get audio through HDMI to my TV??
This question was solved.
View Solution.

Hi,
Please try:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?swItem=vc-107611-1&a...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Macbook 2008 no audio from speakers - can't disable digital audio - red light in headphone jack

Looking for help with this problem, that seems like a lot of people had in the past and still have, but I see that a couple of discussions on it here have been archived. Too bad, as the problem continues.
I seem to be having the same problem with my late 2008 white 2.1Ghz Macbook.
I had used earphones a few times with movies and iTunes, with no problems. Now I've just rebooted to find that I have no audio from internal speakers (the boot up chime works though). Earphones work perfectly.
There is a constant red light in the earphone jack. The volume icon in the top menu bar is greyed out. In the Sound preference panel, Built-in Speakers are not available as an option for audio out. The only option is Digital Audio. If I connect earphones, then they are available as the only option.
I have tried all the various methods that people have recommended, to switch off digital audio through the earphone jack: trying to flip the little switch with a toothpick, paper clip, etc., as well as cleaning around inside the jack with a bit of rubbing or cleaning alcohol; also tried inserting and removing the earphones plug several times, while pushing the volume buttons on the keyboard. Nothing works.
I did get something from inserting/removing the earphone plug, as I seemed to be able to adjust volume from the keyboard, but I never got sound out from the speakers; the volume window seemed to indicate increase/decrease volume as I pressed the keys, but after a few seconds the volume window greyed out again with the No Entry symbol.
Trying to flip the digital audio switch in the jack occasionally gets the red light to turn off for a couple seconds, but then it comes back on.
Is there any particular problem with this that can't be solved by the aforementioned methods, that many people have used to solve it in a simple manner? Could my problem be more serious? Is there anything I could do if I opened up the Macbook, e.g., somehow to manually turn off the digital audio switch?
Any help greatly appreciated.

Got it fixed with a small flathead screwdriver with a fairly wide blade. Opened iTunes, started playing songs, had red light in headphone jack, as per usual with this problem.
Put screwdriver in jack, with blade more or less vertical, started moving it around inside of jack in clockwise motion, pressing pretty firmly. Took just a couple of "swirls" around the inside of the jack and then audio finally turned on! Was a bit of a hassle, but finally worked.
Many thanks to all for their suggestions.
P.S. re. advice not to use metal object. This was the only way I was finally able to solve the problem (i.e., using the small screwdriver). I didn't see where using a metal object would be a problem, seeing as the headphone plug itself is metal. Anyway, it worked.

Imported files from my camera, a mixture of photos and videos, the videos (mp4 format on my Canon SX60 HS) always appear at the start of my library view. What am I missing here?

Even though I select sorting by capture time, the videos do not intersperse with the photos in chronological order. What am I missing here?
I have tried both putting them in a collection and viewing all pictures etc. to no avail.
In Windows Explorer, I have them sorted by time taken successfully. They all import into folders by date in "My Pictures", both photos and videos when I import them.
I am running Windows 7 Pro 64 bit and LR5 CC edition.
Ron.

LR's handling of video metadata (e.g. capture time) is incomplete and buggy. Please add your opinion and vote to these threads in the official Adobe feedback forum:
Lightroom: Still inconsistent capture date/time for videos
Lightroom: Metadata applied to videos in Lightroom isn't available in other applications

Soft route audio from line in thru to headphones / Audio Midi Setup

howdy,
I am trying route audio from the line-in jack to the headphone jack. It seems that this should be possible using audio midi setup but the "thru" buttons don't respond to mouse clicks. Any ideas? The shareware program "Line-in" works but I only get audio on the left channel.
thnaks, Dan

to answer my own question, the through routing is possible using GarageBand. I'd still be interested to seeif anyone knows how AMS is supposed to work.

T500 will not boot from bootable CDs/DVDs, but will read and open files on them

System: 2 T500s, both manufactured early April 2009, win XP, ATI Radeon 3650 graphics,4GB RAM, latest Lenovo drivers installed..
Problem:- Our 2 T500s cannot boot from any windows coded recovery CD -except Lenovo's rescue/recovery discs. Some -but not all- Linux code recovery CDs do boot the T500. Every other kind of CD and DVD such as audio and video works fine in windows XP.
Here an example of our 2 T500s' failure to recognise bootable CD/DVD discs. All the files and folders on a Paragon Partition Mgr v8.5 Recovery CD can be viewed in windows explorer and files such as jpg, txt and zip can be opened. This CD will not boot the T500, however, it will boot our other -non-Lenovo- computers. The same applies when the media are DVDs with identical content.
We have tried several different kinds of CD and DVD media to no avail. Burning the media on other computers and using several kinds of burning software does not help, ourT500s refuse to boot from them too.
The problem seems clear enough, on starup our T500s fail to distinguish between windows coded bootable and ordinary CDs/DVDs -unless they are Lenovo recovery/restore discs.
A solution would be gratefully received.

Thank you for your very kind assistance,
Q: "1. Did you apply the DVD firmware fix here?"
A. It was` already installed on our 2 T500s. We have also applied just about every driver update from Lenovo.
Q: "2. Did you try booting from a USB optical drive that you first attached to another system where you could verify that booting from it was possible?"
A. Yes, many times from a USB CD/DVD drive, it failed too. We burned on that drive too, but the T500s will not boot from those CDs either.
Q: "3. In this thread the solution was to use another burning program than Roxio..".
A. We have used the Paragon internal ISO creator/burner, the Roxio burner that was preinstalled wth the T500, BartPE internal ISO/burner ,InfraRecorder and others too. Made ISOs and burned from them, burned CDs directly on the fly etc, all to no avail..
For some reason, our two T500s' CD/DVD drive controllers or some intermediate software act as if the CD's boot sector is not present. Clearly, something (BIOS, software, unstable hardware, or ? ) is blocking the read or write of the data necessary to boot these CDs. Whatever that 'something' is, it has no effect on burning and booting Lenovo recovery CDs.
The bizarre part of all this is that a`Lenovo recovery CD burned on the T500 drive WILL BOOT the T500. A Paragon v8.5 recovery CD or BartPE CD burned in one of our non-Lenovo computers will boot ithat and every other computer we have except our T500s.
PS Thank you for the link to the new version of Roxio, will download and install it.

10.6.8: audio goes out of sync in Netflix streaming and *.avi files

Hello,
This began happening a couple of weeks ago and it's maddening! There haven't been any software changes or anything recently.
At first I thought it was just a Netflix problem, or perhaps an internet connection problem. Audio will at some point during play, 'skip', and play the same audio over again (i.e., "Hello, Ja-Hello, Jack!"), and from that point on, the audio is lagged behind the video just a bit.
Then I began watching some *.avi files on my HDD today, and the same thing is happening with them, too! If I reload the browser or close and reopen the *.avi file, the audio will start out in sync again, but at some random point during playback, it will happen again.
Hope someone knows what's going on! Thanks!
Mid-2010 Macbook Pro 10.6.8

For anyone who's interested, I found a solution to this problem. Once imported into Encore, the leader in on the video and audio files cannot be trimmed at all. (I had been trimming the beginning of the video and matching audio file to eliminate the 8 seconds of dead space at the start of the clips.) Although the trim took effect immediately in the Encore timeline and I could also watch it in preview in sync, exporting was another story. The audio track seems to retain the trim when exporting but the video track does not, hence the 6-7 second delay between audio and video.
I reimported the files to my project and left in the 8 seconds of dead space at the start and voila! The video and audio match up when exported.
Ideally the trim tool would just work as its supposed to through export and all, but at least I found a solution I can work with.
(As a note, the trim works just fine in export on Encore CS5. I only had this problem with Encore CS6.)

Separate audio from video - I want BOTH an audio and video file

Similar Messages

Maybe you are looking for