Separate clip flashing at the beginning of each clip

Each clip I insert into my sequence has a brief flash of another clip at the beginning of it.
When I select the clip and trim the unwanted piece away, the unwanted piece simply shifts to the the next available point on the clip.
This repeats for every new clip I insert into my sequence.
What feature is causing this, and how to I turn it off.
I am new to Premiere, and I am unsure as to whether this is related to the problem, but the attached picture shows a piece extending right from the marker.
I don't know if this has any significance, but it seem's relatively close to the length of the unwanted piece, and it's all I can find out of place.

the Micro photo (not sure about the micro) has what your referring to as long as the screen is on. It's a sad known bug. Just set your screen to turn off ASAP and basicly deal with it. Noone on the Head-Fi forums can find a fix for it either

Similar Messages

One second of black appearing at the beginning of each clip in timeline.

I just got FCP and I'm having an issue. Every time I put a clip from the event brower into the timeline, there's a second of black at the beginning of each clip. This is only between clips, not the first one. If I move a clip to the front, there's no second of blackness before it, but now the one that was put second has the blackness that wasn't there before.
I see in preferences, there's a transition setting, but it won't let me set it lower than one. I figured this had to do w/ transistion effects, but could this be doing it?
Both video and project are 720p HD 30p Stereo.
I've googled all kinds of word combinations, but can't seem to find a solution.
Any help?

Complete mystery to me as well, and when I have something odd like this, I trot out the following suggestion:-
Corrupt preferences can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
http://www.digitalrebellion.com/prefman/
Shut down FCP X, open PreferenceManager and in the window that appears:-
1. Ensure that FCP X is selected.
2. Click Trash
The job is done instantly and you can re-open FCP X.

Building iDVD project - white flashes at the beginning of each scene during playback?

I am building a DVD project with multiple movies. I used the Bronze Wedding in the "old themes" menu, which was less problematic than the 7.0 themes. When I click on the segment to play, there is a moment (probably just 1 frame) of white that flashes before the segment starts playing. This is not in my original Final Cut Express movie, and it happens in every segment, not just at the beginning of each movie.
I used Final Cut Express v.4.0.1, iDVD v.7.0.4 and the entire amount of footage on the project (3 separate movies) lasts a total of 1 hour and 17 minutes.
Any ideas what this flashing white screen is?

Hi
How did You go from FCE/P to iDVD ?
I do
FCE/P to iDVD
Several things
• How to go from FCE/P to iDVD
• Free space on Start-up hard disk
• Encoding
• Brand and type of DVDs used
• Burn speed set
• iDVD BUG
• Chapters
How to go from FCE/P to iDVD I do
• Disable Screen and Energy saver
• IMPORTANT --> FIRST in FinalCut - Mix Down Audio under Sequence Menu / Render Only / Mixdown
• Export out as a QuickTime .mov file
• Select with Mark - Chapter Mark
• Not as Self-Contained (not important but saves time and space)
• NO QUICKTIME CONVERSION (IMPORTANT)
This QT.mov file I import into iDVD from within iDVD.
Free space on Start-up hard disk
I set a minimum of 25GB (for Mac OS and iDVDs temp files)
Encoding
• I use Pro Quality encoding
Brand and type of DVDs used
• I use Verbatim
• I use DVD-R
Burn speed set
• I set down this to x4 (or x1)
iDVD BUG
• One can not go back to movie-project for any alterations and then go back to
the iDVD project. It will notice and ask You to either Up-date or Cancel. Neither
of them will work.
Medicine - Start a brand new iDVD project.
Use of Chapters
• I only use a to z and 0 to 9 in naming them. NO other symbol/letter !
• NO Chapter-mark at very beginning - iDVD NEEDS TO set this by it stlf
• No Chapter marks in or within two seconds from a transition
(Way around this last one - Export movie as QT full quality and NO Chapter marks
Import this into a new Movie-project and now You are free to set C-Ms where You want
them except at very beginning - still)
Material used to build movie
• video - I use streamingDV (or convert all other to this eg .mp4, .avi, .wmv etc)
• audio - I use .aiff 16-bit 48kHz or from Audio-CD (44.1kHz) - no .mp3 or direct from iTunes
• photos - I use .jpg - no .bmp etc
Trash iDVD pref file and run Repair Permissions - and have a re-try.
from post ??
May not be relevant, but I had the same problem with iDVD, where burned DVDs showed a green screen. It was cured by quitting Quicksilver and Quickeys as well as disabling sleep and screensaving
Yours Bengt W

Noise at the beginning of each clip. PLease please help!

I have multiple interviews on my video and every one of the clips start with some bad noise. The problem seems to be happening after encoding the video. It sounds great in premiere but once I encode the noise appears. I recorded in 16 bit with a mono directional microphone. added music and i used a little bit of the denoiser ( -9) effect ( which doesn't seem to affect the start of the clip) please please help.

It is a known issue with the denoiser effect, it takes a few frames for it to kick in. If you have Audition you could use the noise reduction effects there instead, they are much better.

Simplest way to display a title or caption at the beginning of each scene?

I am editing a video to make an instructional dvd covering 23 separate lessons. Without some kind of text in the first few seconds of each scene, there is no way for the viewer to quickly and efficiently distinguish one scene from another as they jump forward or backward from scene to scene. They would have to go back to the main menu between each scene to find the one they're looking for, and that's cumbersome.
I would like to add a caption/title (not sure what the technical Adobe term is -- I'm obviously an amateur) to the screen at the beginning of each scene. It can be a text overlay on top of the video, or it can be a blacked out screen (or whatever) with text that lasts a few seconds before each scene begins. I just need something to let the viewer know which lesson they are about to see.
I went through the footage and added scene markers at appropriate places, and the menu is functional. Now I'm looking for the most efficient (least time-consuming) way to accomplish my goal. It looks like one alternative is to manually split the clips at each scene change, then go to sceneline and insert a title between each scene, then manually type in the text that corresponds to my description of each scene. I hope this isn't the only, or the most efficient way.
Anyone know a simpler alternative? The simpler the better, as only a few people will be using the dvd so I don't want the cost (measured in editing time and effort) to outweigh the benefit of viewer convenience. Thanks in advance.

I agree with Steve G. on adding the Titles from the PrE Titler function. Also, being new to PrE, this article on Titler might be useful, before you get tripped up by a few aspects of a New Title: http://forums.adobe.com/message/4976998#4976998
Good luck,
Hunt

How can I reset the CTI for each clip to 00:00?

I'm brand new to this - got Premier Elements 12 yesterday, so please bear with me.
I have clips from a soccer game, each of which starts with 00:00. I have written notes about key scenes in each clip using the time that scene occurs in each clip. But when I add clips to the timeline, each clip's CTI begins at the point where the last clip's left off. So, say I wanted to get to a scene in clip 2 at 0:44. But clip 1, with a duration of 4:30, precedes clip 2 in the timeline . To get to the scene I was looking for in clip 2, I'd have to add the 4:30 from clip 1 to the 0:44 in clip 2 to find my scene in the timeline at 5:14 . Obviously, the problem only gets worse with each additional clip. And near impossible when I trim clips.
One "workaround" I can use is to make a copy of the original clip in project assets, adjust the in and out points in the copy to get the scene I want, save/rename that scene and add it to the timeline instead of the original clip. Each scene would then be renamed and would show it's specific duration in the timeline. But that seems like a lot of work, to have to make copies of original clips in assets, trim them there and take them to the timeline. Back and forth, back and forth.
Is there a way to keep the start and end times of each original clip when I add it to the timeline, so I can isolate each scene in that clip and trim out the unwanted portions without having to do math or spend time making and trimming copies? To be more succinct, Can I reset the CTI at the start of each clip to 00:00 within the timeline?
I hope I've described my issue in a clear way that doesn't cause confusion. If not, please let me know what other questions you have or additional info you need to understand the issue I'm describing. Thanks, and sorry for the long post.

mascott2300
Please take a look at the blog post that I wrote about the gathering, assembling, organizing, and management of clips in a large project.
ATR Premiere Elements Troubleshooting: PE11: Project Assets Organization for Scene and Highlight Grabs from Collection o…
See if any of the details work for you in your planned Premiere Elements projects.
Also, from the point of view of leaving informational notes in the program, consider the "Comments" opportunities of the unnumbered markers when you place unnumbered markers in the Timeline.
ATR Premiere Elements Troubleshooting: PE11: Forget Me Not Clip Details and Timeline Unnumbered Markers
Please do not hesitate to ask questions or to ask for clarification on anything written.
Thank you.
ATR

IMovie 09 truncates up to 1 second at beginning of each clip on import

When importing new video from my Canon HV20 (HDV), I'm noticing that the beginning of each new clip is missing up to one second of recording when compared to the source tape. If I were to import the same material using iMovie HD v6.0.3, the whole clip is imported. Any ideas?

Same issue using an HV20 here also. Any resolution?
I tried doing a manual import, but it still misses half a second or so of video from the source. I only tried to import the first clip, so I don't know if manual import helps with subsequent clips (when manual importing and letting the camcorder play to end).

I need to back up and sync multiple iPhones to a single iMac. Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others. How can I do this without getting all of the contacts, etc. mixed? Tnx

I need to back up and sync multiple iPhones to a single iMac. Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others. How can I do this without getting all of the contacts, etc. mixed? Tnx

This might help: http://support.apple.com/kb/HT1495.

While recording in captivate 4 I get a pop at the beginning of each recording

While recording narration over a PP conversion in captivate 4 I get a pop at the beginning of each recording, It doesn't seem to matter if I use keyboard shortcut or the mouse. Any thoughts?
Paul

Welcome to our community
Is the unwanted bit part of the countdown?
If so, there are a couple of ways to avoid it.
1. Don't record your narration at the same time you record the actions. Record it separately. No narration means no countdown.
2. After the countdown stops, consider that first slide to be a throwaway and ensure you don't begin recording in earnest until after you hear the first camera shutter sound.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

My iBook has a blank page at the beginning of each chapter. How do I delete?

I have a blank page offset to the left at the beginning of each chapter. How do I delete them?

The first selectable template is "Basic"... the template - and any others have placeholder text and images excepting pages "Default" and Blank. The "Default" page accepts flowing text. "Blank" is just that with only any BG image and page numbering decided in the template.
Nothing you describe seems to be part of just opening a standard template.
Below are screen shots from the book tree and the layouts - these are the "Basic" template pages without any modifications.
Any of the pages shown in the tree can be deleted. Chapter and Sections will also delete any pages added under them.

How can I add a dip to white at the beginning of a clip?

How can I add a dip to white at the beginning of a clip? I know where to find it on Pr, but I'm new to AE. I have 2 clips that need to transition one to the other. The first clip ends by dipping to white; therefore, I need to either dip to white at the beginning of the 2nd clip & line them up so they overlap well, OR I need to find a white transition to place between them like in Pr.

Make a whote solid. Animate its opacity from 0 to 100 and back again.
You'll use couple-three layers -- no automatic transitions in AE. That's what Premiere's for.

How do I automatically capitalize the beginning of each sentence in Pages?

Hello there!
Please help...
How do I automatically capitalize the beginning of each sentence in Pages version 5.2?
The old version of Pages (Pages '09) automatically capitalizes the first word of each sentence. But in Pages 5.2, I have to manually capitalize the first word of every sentence. How can I make this automatic?
The options in Menu > Format > Font > Capitalization, do not show an option for sentence capitalization. Please help. Thank you!

Feature removed from Pages 5 along with over 100 others,
Pages '09 should still be in your Applications/iWork folder.
Pages 5 is a disastrous beta pushed onto users, and misrepresented by Apple as an "Upgrade".
Peter

How to reduce the time for each clips up to 0,04 seconds?

Hi, I'm trying to realize my first time laps. I've need to reduce the time for each clips up to 0,04 seconds, but it seems that the minimum time is 0,1 second. There's a solution?

And use a zip file. Many people can't open RARs.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How do I set the length of each clip?

I have just begun trying to build a video with Premiere Elements 10
I have created many videos with Windows Movie Maker..found it boring for Effects etc.that's why I have this new software.
Now my question is ..How do I set the time for each clip?
I like to add a clip that goes with each lyric in the song.
Thanks.

Welcome to the forum.
As Steve points out, that is "editing."
One can use either of two Tools in PrE, to Trim the Clip to suit.
First, one can Dbl-click on the Clip in the Project Panel to open it in the Source Monitor, which looks a bit like the Program Monitor, but it has the In & Out Point settings. When that Clip has been Trimmed, as needed in the Source Monitor, just drag it to the Timeline.
Or, one can drag the Clip to the Timeline, and then click+drag on the Head of the Clip to set its In Point, and on the Tail, to set the Out Point.
Good luck,
Hunt

How do i get the playhead to start at the beginning of a clip?

This should be an easy one. For the life of me, I can't figure out how to play from the beginning of a clip (region).
Isn't there a setting that will allow me do play directly from the beginning of a clip, and not just from the beginning of a session, or from a marker?

Forgot about that one.
I appreciate all the feedback from everyone.
Bob Holmcrans
voiceover
voiceover coaching
audio production
telephone: 240.731.8001
email: [email protected]
website: www.bobvoiceover.com

Separate clip flashing at the beginning of each clip

Similar Messages

Maybe you are looking for