Separate Email and SMS messages not found

Hi Guyz,
I'm just wondering, I can't find any options under messages separating email and SMS messages on my 8100.  Would this be a platform issue?  My current platform is v4.2.0.  Is there a way to download and upgrade a new platform?  Or can i just download a theme that has that option...
Thanks in advance

Go into messages,
Press Menu button,
Scroll to options,
then general options,
scroll down and you will see SMS and Email inboxes: Theme controlled etc, change it to seperate.
If your issue is resolved, put a checkmark in the green box that contains the resolution.
OR
If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
~Gday from Down Under~

Similar Messages

  • Different alerts for email and sms messages for a contact with custom ring tone

    Hello,
    I have a Curve 8530 with OS 5.0.0.395.
    I have my default sound profile set up to play one type of alert sound when I receive and email message and another when I receive an SMS message (so I know the difference without looking at my phone). That works fine except for contacts that I also have a custom ring tone set up for. It seems that under the Custom Ring Tones/Alerts section of the contact there is only one entry for Messages and it applies to both email and SMS. If I have the contact's message alerts set to the alert I have for email, then their SMS messages play the same alert and I might think it's an email. Or if I have the messages alerts set to the SMS alert sound then their emails sound like SMS messages. Is there a way to have a custom ring tone set up for a contact but still allow their emails and SMS messgaes to follow the current sound profile's settings?
    Thanks.

    Hello,
    Have you had any luck resolving this issue. I had a 8230 and this was possible. But like you I can get the 8530 to work. If you found the solution, please let me know.

  • How to stop email and sms messages from previewing on my iphone 6 screen

    How to stop messages from previewing on my iphone 6 screen for others to see?

    Setting App > Notifications > Mail > Change the alert style to None (Then repeat for Messages).

  • Email and SMS and keyboard in landscape mode.

    I was wondering if, by any chance Apple is working to enhance the iPhone's email and SMS capabilities by incorporating the use of the accelerometer. This would allow email and sms messages to be viewed in widescreen format making it easier for my older eyes to see. This would also allow email and text messages to be created and sent using a widescreen keyboard making it much easier for my big fumble fingers to use. This would be the one GREATEST enhancement that could be made for the iPhone!

    No one hear can address 'what Apple is working on' - this is a user-to-user forum. There are aps in the App Store for landscape emailing; nothing for SMS.
    You can submit feedback to Apple: http://www.apple.com/feedback/iphone.html.

  • Our email keeps saying server not found - it is up and running and we can access it from other computers just not the imacs, our email keeps saying server not found - it is up and running and we can access it from other computers just not the imacs

    Our email keeps shutting down and saying server not found. It works fine on all the PCs but not our iMacs. Any help would be appreciated. We just downloaded the new LION  - would this be an issue?

    I feel like I'm getting closer. First, the connector on our cable didn't fit snugly. Tug it slightly and it lost contact. I put a new cable on the server and now it seems more robust. Server Admin opened faster, anyway.
    In the Console, I'm seeing some Kerberos errors:
    8/31/09 10:00:17 AM com.apple.launchd[1] (org.samba.nmbd) Throttling respawn: Will start in 5 seconds
    8/31/09 10:00:17 AM com.apple.KerberosAutoConfig[892] Couldn't find KerberosClient config record
    8/31/09 10:00:43 AM com.apple.DirectoryServices[26] Enter machine password:
    8/31/09 10:00:43 AM com.apple.launchd[1] (org.samba.nmbd) Throttling respawn: Will start in 10 seconds
    8/31/09 10:00:43 AM com.apple.DirectoryServices[26] Enter machine password:
    8/31/09 10:00:43 AM com.apple.DirectoryServices[26] Enter machine password:
    8/31/09 10:00:44 AM com.apple.DirectoryServices[26] [2009/08/31 10:00:44, 0, pid=902] /SourceCache/samba/samba-187.8/samba/source/libads/kerberos.c:adskinitpassword(228)
    8/31/09 10:00:44 AM com.apple.DirectoryServices[26] kerberoskinitpassword [email protected] failed: Preauthentication failed
    8/31/09 10:00:45 AM com.apple.DirectoryServices[26] [2009/08/31 10:00:45, 0, pid=902] /SourceCache/samba/samba-187.8/samba/source/libads/kerberos.c:adskinitpassword(228)
    8/31/09 10:00:45 AM com.apple.DirectoryServices[26] kerberoskinitpassword [email protected] failed: Preauthentication failed
    8/31/09 10:00:46 AM com.apple.KerberosAutoConfig[909] Kerberos configuration is up to date
    This server is bound to Active Directory (using Directory Utility -- don't know if I need to do it elsewhere?) and I'm not sure what was trying to authenticate at that time.
    My error messages for "server not found" have gone away for my iChat client, but now it just pops up the authentication window over and over when I try to log in. I'm wondering if there's something missing in the server binding?
    Mike

  • Sending messages thru email and SMS without using XMS APIs

    Hi,
    I already have some working code that sends messages thru email and SMS. But currently it uses XMS APIs therefore I have a dependency on files like wdk.jar. I want to try and eliminate using the XMS APIs and only use soap to send these messages. I was wondering if there is some documentation available on how I can do this. Also if there a lot of code that needs to be written to do that.
    I primarily want a very simple application that sends only string messages and reduce my dependencies.
    I would really appreciate all the advice.
    Thanks,
    Sonali Nath

    Hi,
    You may refer to the following links to check if they help:
    Sending SCCM Status Messages from MDT Scripts.
    Send SCCM task sequence email report
    Regards,
    Sabrina

  • Email Messages Have Started Arriving as Both Email and SMS

    All of a sudden, all of my email messages have started arriving on my iPhone as both mail and SMS messages. This happened yesterday (Mon., 3/3/2008) evening. I had downloaded the latest iPhone software the previous day and had had no initial problems in the first 24-plus hours. I haven't intentionally changed any settings. Does anyone have any idea what's going on?

    Mine, too. Although I hope by posting this "all's well" message that I don't cause it to start again. Regardless, good to know I wasn't alone with this issue. Thanks!

  • SMS messages not syncing in iOS 8 and Yosemite

    I'm using iOS 8 and Yosemite.  I was able to receive calls and sms messages from my phone on my computer.  That has all of a sudden stopped.  SMS contacts are now listed in red in Messages and are not delivered.  iCloud accounts are the same on both devices.  Any ideas?

    Hey srobs,
    Thanks for the question, I can definitely understand how frustrating it may be when messaging does not work on your iPhone. The following resource provides some great troubleshooting steps that you can attempt:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    To resolve issues with sending and receiving iMessages, follow these steps
    1. Check iMessage system status for current service issues.
    2. Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
    3. Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
    4. iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
    5. Restart your device.
    6. Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    If you still can't send or receive an iMessage, follow these steps
    1. Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
    2. Make sure that the contact you're trying to send a message to is registered with iMessage.
    3. If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    4. If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
    5. Back up and restore your device as new.
    Thanks,
    Matt M.

  • I can not load my yahoo email. I get the following message: "Not Found The requested URL /mc/showMessage was not found on this server. Apache/2.2.9 (Debian) mod_jk/1.2.26 PHP/5.2.6-1+lenny4 with Suhosin-Patch etc... (too many characters for your ? page

    Can't log into yahoo email. I get the following message: "Not Found The requested URL /mc/showMessage was not found on this server.

    OK here is the problem I am having with this.. It might be related to my own machine but I need help where to look..
    on the command line using mintty on XP I have this:
    $ nslookup us.mg6.mail.yahoo.com
    Non-authoritative answer:
    Server: Wireless_Broadband_Router.home
    Address: 192.168.1.1
    Name: any-ycpi-uno.aycpi.b.yahoodns.net
    Addresses: 98.136.145.155, 216.115.101.178, 216.115.110.119, 216.115.101.179
    98.136.145.157, 98.136.145.154, 216.115.110.118, 98.136.145.156
    Aliases: us.mg6.mail.yahoo.com, geoycpi-uno-deluxe.gycpi.b.yahoodns.net
    geoycpi-uno.gycpi.b.yahoodns.net
    HOwever when I look in firebug for where the ip for the above domain is this is what I get:
    66.115.130.31 clearly not listed above..
    Let's check the aliases
    $ nslookup geoycpi-uno-deluxe.gycpi.b.yahoodns.net
    Non-authoritative answer:
    Server: Wireless_Broadband_Router.home
    Address: 192.168.1.1
    Name: any-ycpi-uno.aycpi.b.yahoodns.net
    Addresses: 216.115.110.118, 98.136.145.156, 98.136.145.155, 216.115.101.178
    216.115.110.119, 216.115.101.179, 98.136.145.157, 98.136.145.154
    Aliases: geoycpi-uno-deluxe.gycpi.b.yahoodns.net
    geoycpi-uno.gycpi.b.yahoodns.net
    nope
    $ nslookup geoycpi-uno.gycpi.b.yahoodns.net
    Non-authoritative answer:
    Server: Wireless_Broadband_Router.home
    Address: 192.168.1.1
    Name: any-ycpi-uno.aycpi.b.yahoodns.net
    Addresses: 98.136.145.156, 98.136.145.155, 216.115.110.118, 216.115.101.179
    98.136.145.157, 216.115.101.178, 98.136.145.154
    Aliases: geoycpi-uno.gycpi.b.yahoodns.net
    nope
    where is this 66.115.130.31 ip comming from.. why isn't firefox using native DNS lookup?
    When I do a reserve lookup on that ip it points to nationalnet.com as the top SOA..
    any ideas?

  • Not able to make outgoing calls in iphone4. Regularly i face this problem, at the same time i receive incoming call, can do net surfing, can access email and sms, only outgoing calls get failed every time. please answer to solve this problem

    not able to make outgoing calls in iphone4. Regularly i face this problem, at the same time i receive incoming call, can do net surfing, can access email and sms, only outgoing calls get failed every time. please answer to solve this problem

    Good day Sidharth Namrta,
    It sounds like you are unable to make any calls, but you can recieve them, and everything else seems to work fine. I recommend you use the troubleshooting in the following article to help you get that resolved, named:
    iPhone: Troubleshooting issues making or receiving calls
    Follow the steps below to resolve this issue. Please test after each step.
    Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
    Check your phone settings:
    Check your Do Not Disturb settings: Tap Settings > Do Not Disturb.
    Check for any blocked phone numbers: Tap Settings > Phone > Blocked.
    See if Call Forwarding is turned on: Tap Settings > Phone > Call Forwarding.
    Ensure that your software is up to date:
    Check for a carrier settings update.
    Check for an iOS software update. 
    Note: Some updates may require a Wi-Fi connection.
    If the iPhone has a SIM card, reseat the SIM card.
    If the iPhone 4 or iPhone 4s is on the Verizon network, dial *228 from the iPhone and select option 2 to update the Preferred Roaming List (PRL). The PRL determines the cellular towers the phone uses for cellular service, selecting those with the best signal strength.
    Reset the network settings: Tap  Settings > General > Reset > Reset Network Settings.
    Try to make or receive calls in another location.
    Attempt to isolate to one network band:
    If you're having the issue on LTE, disable LTE, if possible, and try again.
    If you're having the issue on 3G/4G, disable 3G/4G, if possible, and try again.
    Contact the carrier to check the following:
    Your account is properly configured to use the specific iPhone that has the issue.
    There are no localized service outages.
    Your account doesn't have a billing-related block.
    Your calls don't have errors on the carrier system.
    Restore the phone as new.
    If the above steps don't resolve the issue, go to an Apple Retail Store, carrier, Apple Authorized Reseller, or contact AppleCare to send the phone in for service.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • How do I verify my email account for Icloud if I try to open the link and it marks "not found", How do I verify my email account for Icloud if I try to open the link and it marks "not found"

    How do I verify my email account for Icloud if I try to open the link and it marks "not found"

    Welcome to the Apple Community.
    Put in a request for another verification e-mail to be sent to you.
    Start here, change your country if necessary and go to manage your account 
    Also check your Mail rules and filtering, the verification mail may be going to a junk folder or even being deleted altogether. You may also wish to contact your mail provider to see if their spam filters are removing the email before it gets to you.

  • I cannot get email and the message says the device is not connected to the server

    I cannot get email and the message says the device is not connected to the server. How can I resolve this issue?

    Hey there Chen_erping,
    Thank you for asking your question! It sounds like you are unable to send or recieve email from the account you setup in the Mail app on your iPad. I want to recommend the troubleshooting steps outlined in the following article:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Log in to your email provider's website to ensure that the account is active and the password is correct.
    Restart your iOS device.
    Delete the affected email account from your device.
    Tap Settings > Mail, Contacts, Calendars.
    Choose the affected email account, then tap Delete Account.
    Add your account again.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Problems with email and SMS after 1.3.5

    Let me first say that I love the Pre. Up until this point it has been perfect - I have a replacement, but that is because I dropped it (wrong angle, wrong location, broken screen). However, following the 1.3.5 update I'm now having a fairly important problem with email and sms - I can receive email and messages, but not send them.
    I have two email accounts. My personal account is with earthlink. My work account goes through an ISP using the domain name of my employer. I'm not using Microsoft Exchange or Outlook. I have tried deleting and reentering the accounts and that did not work. I can receive messages but get error messages when I try to send. 
    The same for messaging. I don't use it very often. But yesterday I get a text message  and tried to respond and got the error message.
    I power the phone off every night because I have a landline and use that as the primary phone at home.
    I have been looking around message boards trying to find a fix for this.  Has anyone had this issue and resolved it?
    Thank you.
    Post relates to: Pre p100eww (Sprint)
    Message Edited by starburst42 on 01-05-2010 07:06 AM
    This question was solved.
    View Solution.

    I forgot to add that this is a stock Pre. There are no patches or homebrew apps. 
    Edit:
    I found a fix for the email problem, in posts on precentral and this board from a few months ago. The info came up in a Google search, and not searches of the boards, which is kind of frustrating.  Here is the info, and the link.  I really wish Palm would put info about this work around on their site, or at least make it easy for people to find.  The solution is the last message in the thread linked below:
    Had the same problem.  Checked with Earthlink - no help.  Checked with Sprint - no help.  Checked with Palm - no help.  Here is what finally worked:
    Delete the earthlink account and start over.  When you do - this is the key - set up the account manually!  If you use the Pre defaults and try to change the settings it will not correct the problem. Your settings for outgoing mail must be:
    "smtpauth.earthlink.net"
    Use Authentication set to "on"
    username is your email address
    your email password
    port set to "587"
    encryption "none"
    Again, the key is to set up manually.
    smtp email fix
    Message Edited by starburst42 on 01-06-2010 12:08 PM
    Message Edited by starburst42 on 01-06-2010 12:09 PM

  • EMail and SMS problem

    hi 
    I just got a Blackberry Pearl. I configured it to receive my email. Now there is an email icon and all the email goes there. BUT it also started going into the folder that was the repository for SMS text messages. So someone told me to go into general options, select SMS and Email inboxes and choose Separate.  I did that but wiht the net result that the SMS folder now shows only my email and the Email folder also shows my email.
    The only way to get to my SMS inbox is to select the menu options, select View FOlder, then select SMS Inbox which is a little cumbersome.
    How do i fix that so my emails go to my email folder and the SMSes go to my SMS folder?
    ALso is there a way to prevent the Blackberry from notifying my every time i get a new email. I am fine with being notified when I get a new SMS?
    thanks
    Sandip 
    Solved!
    Go to Solution.

    To create seperate folders for email and sms, yes you open any of you message folders and hit the menu key, select options then general options, scroll down to sms and email inboxes, change that to seperate. then hit the back key and select save. You should now have a sms icon for text, an icon for each email and an icon for messages that will catch everything. If you do not have these icons try a battery pull. Remove the battery with the phone on and leave it out for 30 seconds. Replace it and allow the phone 1-3 minutes to reboot. Can you now find all the icons?
    ~Lorrie~ Master of All Things Blackberry!

  • Email and SMS Alerts - Solution Manager - PI and EP

    Hi All,
    I am trying to do the below scenario.....But somehow i am lost in the process.
    I have a three system PI landscape and a Solution Manager. I have included the DEV PI in solution manager for CCMS,the CCMS agents are online and it also reflects in RZ20.
    Now the requirement is SOLMAN should send email and sms alerts in below situations which occur in PI system.
    1.The ABAP or JAVA engine goes down.
    2.One of the filesystem crosses certain predefined limit.
    3.Any of the java server node stops working
    4.If any critical job gets cancelled in sm37
    I am looking at steps on how to define the alert categories, auto reaction methods, also the nodes where i have to assign these auto reaction methods.
    I have gone through CCMS documentations, played all sim files and gone through most of the pdf files but i am not able to establish proper steps to do it.
    I am Redhat Linux,Oracle 10g, SOLMAN 7 with PI7
    Can i extend the same for the EP systems also which are pure Java Stack Systems ?
    Also i would like to know if i can send customized alert messages.
    Best Regards
    Raghu

    Hi Juan,
    Thanks for your response.
    I am looking at the MTE classes i.e for the above situations which MTE classes are required.
    Also i have read in some document that we can send the alerts directly to the email IDs and cell numbers without having to mention them in user masters in SU01. Where to mention these ?
    I have my SCOT settings done for email servers.
    The process which i had built up in my mind is all mixed up and i am lost where to do which configuration
    Best Regards
    Raghu

Maybe you are looking for

  • SQL statement for query of all values

    I am trying to pull all the EE's that do not have a value in a specific fields for any row in history. Example Employee table Each employee can have 5-10 rows each The field employeeX can be either Y or N I only want to pull the distinct employee's n

  • Mod_perl/Installing RT Request Tracker

    Hi, I'm trying to install RT Tracker on Mac OS X 10.5 following these instructions: http://wiki.bestpractical.com/view/MacOSXServerInstallGuide I don't want to build apache, I just want to install mod_perl running side by side w/ mod_php, is there an

  • LAP 1242AG Can't use as a repeater

    i bought 2 aironet LAP 1242AG AP's. first i didn't know i had to have a cisco controller to configure/use these. so i flashed the OS to ISO the newest one. so now i can go to the GUI and configure. this is that i need these 2 AP's to do. there for a

  • PO Changes report

    hi plz check this and let me know............ For example : i created a purchase order in ME21N. Using the transaction ME22N i changed the PO qty for the item 10. i want to know other than CDHDR ,CDPOS ,CHANGEDOCUMENT_READ_HEADERS ,CHANGEDOCUMENT_REA

  • Profiling Problem & Web Authentication Proxy

    Dear All, I am facing problem with profiling of workstation over wireless network as ISE is marking these workstations as 'Unknown'. Whereas if I connect same workstation using wired connection then it gets profiled in the right category. Profiling f