Separate first column from the others

Hi,
how can I separate the first column from the others in a way that it does not scroll out of the active window? I.o.w., I want column B, C, D.... to slip "under" A.
I got a "Names" list (column A), and in the following columns lots of stuff, and when I scroll to the right / to the last column, the Names are out of the window.
Thanks a lot!
Peter

Hi Peter,
That was I that provided that answer. Freeze Rows, Freeze Columns doesn't break a column or row from the table it allows the remaining rows or columns to scroll under it.
Here's the trick, the spreadsheet grid must be longer or higher than the boarder of Numbers program. In other words you cannot see the lower right or upper right of the far end of the spreadsheet. It's past the boarder. Then when you scroll it will slide right. Make the Grid out to column Y. Now make the program smaller in size. Now lock a column then as you move from cell to a cell farther right the columns will scroll left until you come to the end of the grid—in this example column Y.
Truly I hope that makes sense for you. I reread it, it confused me. It takes a few seconds to visually show it but, longer to explain. Think of tying a tie, bam it's tied now walk someone through tying it.
Cordially,
RicD

Similar Messages

  • When creating a "lookup" column be able to display not only one column from the other list, but additional columns

    With the lookup technique, it is possible to select an item from another list and display one column of this item
    It is obviously possible to create several lookup columns on the same list and therefore display several columns
    There’s a high risk of not selecting the same item and therefore have inconsistent columns
    The Requirement therefore consist of being able of displaying several columns of the same item from the other list, based on one unique selection
    Example:
    In list(x), define lookup column on list (y), column Title (possible today)
    Then define a “secondary” lookup column on same list, column Code
    The effect would be that when selecting an item from list (X), both Title and Code would show up consistently in 2 different columns of list (Y)
    All possible solutions are welcomed

    If you are using SharePoint 2010, you can retrieve additional columns when adding a Lookup. If you are using 2007, there is no direct OOTB way, but the following two posts provide potential work-arounds:
    https://www.definitivelogic.com/blog/microsoft-sharepoint-2007-pulling-column-data-one-list-another-based-common-list-field
    http://stefan-stanev-sharepoint-blog.blogspot.com/2010/11/sharepoint-2007-associated-lookup.html
    Dimitri Ayrapetov (MCSE: SharePoint)

  • System only loading the first column from csv

    Trying to load data from Excel saved as csv, but the preview and PSA shows data loaded only for the first column from the csv file. All other columns are not loaded from the csv. Changed the lengths of the fields from the datasource to match the ones in the csv to 8, but it only seems to load the first column. What could be the cause?

    Hi
    Check the file format once and general tab in Data source(make sour you selected comma separated file and symbol)
    check below link
    http://help.sap.com/saphelp_nw2004s/helpdata/en/43/01ed2fe3811a77e10000000a422035/frameset.htm
    Regards,
    Venkatesh

  • I need to back up and sync multiple iPhones to a single iMac.  Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others.  How can I do this without getting all of the contacts, etc. mixed? Tnx

    I need to back up and sync multiple iPhones to a single iMac.  Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others.  How can I do this without getting all of the contacts, etc. mixed? Tnx

    This might help: http://support.apple.com/kb/HT1495.

  • I can't see my events from iPhoto (11 - 9.3.1). Only one event is in my library (the first one). The others events disapear!!

    I can't see my events from iPhoto (11 - 9.3.1). Only one event is in my library (the first one) and the last import that I made in iphoto is the first one . The others events disapear!! What can be happen? Please, someone could help me?

    I tried to do shift + alt + command - option
    That's not what I suggested...
    Hold down the option (or alt) key key and launch iPhoto.
    Restore from your back up is the easiest solution.

  • Please help! I have an I-Pad and a mini I-Pad. Both contain the same information. If I delete from one the info or e-mail is automatically deleted from the other. How can these two I-Pads be made separate entities so I can erase everythiing on only 1

    I Hope someone can help me! I have an I-Pad and a mini I- Pad.
    Both have identical content, e-mail , etc. How can I  or what can be done to make them 2 separate I -Pads so that I can erase the content from one but not the other.
    As it is now , if I. delete anything from one,the same is deleted from the other. What action can be performed to make them separate entities.
    thank you for your help in this matter

    Hi If you want to you can put one ipad back to factory settings Before you do this in settings turn off find my iPhone Then you can set ipad up as new. But if you use the same Apple ID you will get the sameApps & data back on again. Cheers Brian

  • We upgraded to Mavericks on two computers at work, and now Favorites from one computer show, while Favorites from the other don't. The same AppleID was used for the upgrade on both computers, but we have separate logins.

    At work, we upgraded to Mavericks on two iMacs, using the same AppleID. Now, in Safari, the Favorites bar shows only my coworker's faves on both computers, and my Bookmarks are in the bookmark listing, also showing on both computers. How can we fix this, so that I only see my Favorites and Bookmarks and she only sees hers?

    I hope it's okay that I post about my progress with this!
    I restarted both computers and tested our Safari connection by deleting a couple of bookmarks on my computer. They did NOT delete from the other computer, so that problem seems to be resolved. I'm not sure what will happen if she signs back into iCloud, but we'll cross that bridge when we come to it.
    I hope this helps, if you have a similar problem.

  • My itunes is separating the first song from the rest of the album

    Can anyone help, my itunes separates the first song from the rest of the album so they apear as two separate things in itunes, very very annoying as it has only done it one some albums not all!!

    I was having this problem if I changed the name of an artist for an entire album from in grid view. This ended up changing the name successfully, but left me with the first track as a separate item in the grid. The solution suggested by bkpr worked for me; I entered the artist name into the album artist field, and saving this change merged the album back together. I could then remove the album artist entry without the album separating again. Thanks for the suggestio bkpr

  • How to separate perticular column from multidimensionl array

    dear all,
    i am just reading CAN bus message, problem is that it is accomodated in a 11X7 array which includes frame time stamp, ID, byte length etc but i am interested in CAN data. can anybody tell me how to separate that column from all. i want to read a column of 5 with all rows. how it is possible.

    Hello Sanjay,
    If your requirement is simply to obtain a single column from a 11x7 array, I would suggest you should do the following:
    1. Use Transpose 2D array to obtain a transposed array
    2. Use Index Array function to retrieve invidual row (which is actually the column of non-transposed array).
    Use index value of 4 (zero indexed), and the output would be a 1D array containing all elements of column 4 (zero indexed) of the original array.
    I hope this helps.
    Regards,
    Navjodh

  • How do I specify the gmail outgoing server if I have multiple gmail accounts in my mail? I have 2 business accounts and when I send mail from one account, it is sent from the other account and the sending email is not from the correct account.

    I love my apple email and do not want to use google mail on safari. However, I have 2 gmail accounts set up on apple mail, but when I send mail from one of my gmail accounts (I choose the specific gmail account in the drop down window), it actually goes out as if it is from the other gmail account. I can't have that happen because one is my job, the other is a personal business account and unfortunately, the mail from both gmail accounts want to send through the personal business account. How do I make it send from a specific gmail account? I even tried deleting the accounts and setting them up again hoping I set it up wrong in the first place, but to no avail, it is still doing the same thing except this time I set the job account up first and then the personal business account and now everything goes from the job account! The only good thing is that the incoming messages work properly and they go into the correct inbox. Somebody please fix my outbox!

    In Mail Preferences/Accounts/each GMail account, set up the SMTP Outgoing Server for each account separately, going into SMTP name/edit/Advanced and specify the Username of each account.  The Outgoing servers must be two different servers, authenticated by the Username and Password of each.
    Otherwise, the GMail SMTP server will change the from address to that of the account where the SMTP server was setup.
    Ernie

  • HT204053 My wife and I have an iphone each using one apple id. How do we stop items being deleted from one phone and then find it has been deleted from the other?

    My wife and I have an iphone each using one apple id. How do we stop phone contacts being deleted from one phone and then find it has been deleted from the other?
    Also this works when one of us downloads an app it appears on the other iphone

    You need to use separate iCloud accounts. This will mean that you can both have your own separate contracts and calendars and put an end to them being deleted by each other.
    Whether or not you have a separate iTunes account, is up to you. If you have a separate iTunes accounts you will not be able to access the music, books, apps that have been purchased by the other. This may be exactly what you want, but it also means that you both may end up purchasing the same item.

  • How to delete a column from the table control in module pool?

    Hi,
      can any one please tell How to delete a column from the table control in module pool?
    thanks in advance
    warm regards
    HareeshKumar N

    hi hareesh,
    I think it is better to hide it.
    How to hide: You can check this link
    Dynamic Hide column in table control

  • How can I remove the Location column from the search results in a .chm file?

    How can I remove the Location column from the search results in a .chm file?
    I generated the file in Robohelp HTML 9.
    As far as I know it's used when you've combined more than one source into the final help file. It is possible (though I don't remember doing it) that I did that once a couple of years ago but now I'm only using one source - the project that's generating the .chm.
    Can anyone tell me how I can remove it?
    Thanks
    Tom

    In Project Setup look at the Window properties. I think you will find Advanced Search is ticked.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Why does Photoshop display colors differently from the other applications even in sRGB mode ?

    Hello all !
    Here is my problem :
    Photoshop is set to use sRGB workspace (in edit/colors.../workspace/RVB).
    If I understand correctly this is how all native windows applications work.
    This means Photoshop and the other applications should display the same colors on a file with a sRGB profile.
    Now this is the case until I calibrate my monitor.
    When I do, Photoshop colors become different from the other applications (irfanview, explorer, browsers...).
    The only way I found to let everything display the same colors is to set Photoshop to use Proofing/RVB Monitor.
    What upsets me even more is that Photoshop colors look "better" to me (dark grays seem to dark to me in the other applications.)
    I have read that this is because Photoshop takes the new profile into account and others applications do not. But I don't think this is relevant here because everything is in sRGB so the only profile is my monitor's and I think calibration is handled globally by windows : everything (including browsers, explorer, and Photoshop) changes color if I choose to apply the monitor's profile or not with windows color management tool ("use my parameters for this device").
    Here is my system configuration :
    - Photoshop CS4 (11.0.2)
    - Windows 7 64 bits
    - HP ZR2440W and DELL 2209WA (these are not wide gamut screens)
    I have spent two days trying to figure the logics behind this and really am upset. Any help would be greatly appreciated. Don't hesitate to ask me if there is something that is unclear or some information I forgot to mention.
    Thanks in advance,
    Yannick

    That sounds like an invitation to continue to talk about the issue.  Fair enough.
    I'm not sure where you're getting "insecurity"...  I am just trying to help you help others more effectively.
    I invite you to re-read just the first sentence of what you wrote very carefully, putting yourself in the shoes of someone struggling with both the terminology and the concepts:
    Photoshop (CMS) reads an embedded ICC profile and CONVERTS it to the custom monitor profile for a theoretical 'true color' display
    Think about what "Photoshop (CMS)" might mean to a person who doesn't know the acronym might stand for "Color Management System" (which is I assume what you meant).  Adobe themselves don't call it "CMS", they use the acronym "CMM" (Color Management Module).  The term "CMS" is used in the computer industry for about a dozen different things.
    While a color profile might have been embedded in an image file before it was opened by Photoshop, Photoshop works on documents.  A profile is not "embedded" in a document, it is maintained by Photoshop with the document and describes the color values in the document.  If Photoshop opens a document without an embedded profile, depending on settings and user choices it might assign a profile or it might even operate on the document without color-management.  Oversimplification doesn't help people when they're trying to learn new things unless it's described as such, for example, "This is a bit of an oversimplification..." or "Generally speaking..."
    Not every monitor profile is a "custom monitor profile".  Quite often a standard profile (e.g., sRGB IEC61966-2.1) is associated with a monitor by the operating system as a default, or a factory profile is installed by a driver package or system update.  Your use of the term "custom" is a bit ambiguous and could be read as implying the creation of a profile using a calibration and profiling device specific to the particular monitor.
    Photoshop's color management code does not convert an embedded ICC profile at all (read carefully what you wrote).  As I said, it transforms color values.  That was the key error in your description that prompted me to comment.
    If ever there is a time to pick words carefully, it's in a color-management discussion.
    -Noel

  • HT2518 After using Migrate Assistant, I made several accounts for every attempt to migrate files from PC to Mac. How can I put all accounts together into one? How can I transfer the files from the other accounts to my primary account?

    Okay, so I did the entire Migrate Assistant process to transfer all my files and what not to my MacBook. Problem is that I did it on seperate occasions and now I have several accounts.
    How can I transfer my files from the other accounts to my primary account and delete the other accounts?

    Problem is that I did it on seperate occasions and now I have several accounts.
    If you had read carefully, Migration Assistant asks what you want to do in this event. That would have precluded the redundancy.
    Part of the fundamental design of OS X is to separate user accounts so that one user can't interfere with another. It's not possible to directly merge an account with another, but you can copy whatever you need to the Shared folder - it is in your Users folder.
    Log in to one account, prefereably a smaller one, and drag the files and folders into Shared. Log out, log into the account you want to be "primary" and drag the files from Shared into their appropriate locations. When you have copied everything you need delete the redundant account.
    Do this for each of them.
    Or, you can just run Migration Assistant again and follow the prompts that address the situation you described. It involves creating a secondary, temporary account from which you can administer the transfer. When it is complete you delete the temporary account(s).

Maybe you are looking for