Separate program to send a smartform converted into pdf, thru mail
Hi Folks,
I had created a smartform and converted it into a PDF format.
Now I want a separate program where in if i submit this program it should sent it throuogh mail.
Note:-<b>I want a separate program not the one where in you design a smartform,convert into pdf and then send thru mail all in one program</b>
Points will be given.
K.Kiran.
hi kiran
the program is as follows
The user is provided with
a) file name
b) email address to send mail
and it sends ANY FILE (.xls,.pdf .xyz..)
Instantaneously !
4. Make two things first :
1. Include with the name : ZAMI_INCLFOR_MAIL
2. Report with the name : ZAM_TEMP147 (any name will do)
3. Activate both and execute (2)
4. After providing filename, email adress
5. Code for Include :
Data
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
FORM
FORM ml_customize USING objname objdesc.
Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
Header Data
Already Done Thru FM
Main Text
Already Done Thru FM
Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
Receiver List
Already done thru fm
ENDFORM. "ml_prepare
FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
Data
DATA : pos TYPE i.
DATA : len TYPE i.
Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
CODE FOR PROGRAM
5.
REPORT zam_temp147 .
INCLUDE zami_inclfor_mail.
DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
EXTENSION = extension
NAME = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
regards,
navjot
reward if helpfull
Similar Messages
-
Problem in sending the Smartform Output as PDF through Mail
Dear All,
I am sending the Smartform Output as an attachment by converting it into PDF. But when I am recieve this attachment I am unable to open the PDF file, it is giving error that FILE IS DAMAGED. Below is the code:
REPORT Y_SEND_MAIL2.
TABLES: vbrk, vbrp.
TYPE-POOLS: abap.
DATA: it_vbrk TYPE TABLE OF vbrk WITH HEADER LINE.
DATA: i_formname TYPE tdsfname,
i_fm_name TYPE rs38l_fnam,
it_vbak TYPE TABLE OF vbak WITH HEADER LINE,
it_ekko TYPE TABLE OF ekko WITH HEADER LINE.
DATA: is_bil_invoice TYPE lbbil_invoice,
output_options TYPE ssfcompop,
control_parameters TYPE ssfctrlop,
e_devtype TYPE rspoptype,
job_output_info TYPE ssfcrescl,
bin_file TYPE xstring,
lines TYPE TABLE OF tline WITH HEADER LINE,
doctab_archive TYPE TABLE OF docs WITH HEADER LINE,
filelength TYPE i,
bin_filesize TYPE i,
docs TYPE TABLE OF docs WITH HEADER LINE.
*"Types
TYPES: t_document_data TYPE sodocchgi1,
t_packing_list TYPE sopcklsti1,
t_attachment TYPE solisti1,
t_body_msg TYPE solisti1,
t_receivers TYPE somlreci1,
t_pdf TYPE tline.
*"Workareas
DATA :w_document_data TYPE t_document_data,
w_packing_list TYPE t_packing_list,
w_attachment TYPE t_attachment,
w_body_msg TYPE t_body_msg,
w_receivers TYPE t_receivers,
w_pdf TYPE t_pdf.
*internal tables
DATA : i_document_data TYPE STANDARD TABLE OF t_document_data,
i_packing_list TYPE STANDARD TABLE OF t_packing_list,
i_attachment TYPE STANDARD TABLE OF t_attachment,
i_body_msg TYPE STANDARD TABLE OF t_body_msg,
i_receivers TYPE STANDARD TABLE OF t_receivers,
i_pdf TYPE STANDARD TABLE OF t_pdf.
DATA: BEGIN OF line_bin,
data(1024) TYPE x,
END OF line_bin.
DATA: data_tab_bin LIKE STANDARD TABLE OF line_bin.
So please suggest a solution.
Regards,
VishalContinued:
SELECT-OPTIONS: s_vbeln FOR vbrk-vbeln,
s_fkdat FOR vbrk-fkdat OBLIGATORY DEFAULT sy-datum.
SELECT * FROM vbrk
INTO TABLE it_vbrk
WHERE fkdat IN s_fkdat
AND vbeln IN s_vbeln.
i_formname = 'Z_SD_JINDAL_INVOICE10'.
output_options-tddest = 'LP02'.
output_options-tdimmed = 'X'.
output_options-tdnewid = 'X'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = i_formname
IMPORTING
fm_name = i_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0. "checking subrc
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF. "IF sy-subrc <> 0
READ TABLE it_vbrk INDEX 1.
IF sy-subrc = 0.
is_bil_invoice-hd_gen-bil_number = it_vbrk-vbeln.
ENDIF.
control_parameters-no_dialog = 'X'.
control_parameters-getotf = 'X'.
CALL FUNCTION i_fm_name "'/1BCDWB/SF00000097'
EXPORTING
control_parameters = control_parameters
output_options = output_options
user_settings = space
is_bil_invoice = is_bil_invoice
IMPORTING
job_output_info = job_output_info
TABLES
it_vbak = it_vbak
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*FORM convert_otf_2_pdf.
CALL FUNCTION 'CONVERT_OTF_2_PDF'
* EXPORTING
* USE_OTF_MC_CMD = 'X'
* ARCHIVE_INDEX =
IMPORTING
bin_filesize = bin_filesize
TABLES
otf = job_output_info-otfdata[]
doctab_archive = docs[]
lines = lines[]
EXCEPTIONS
err_conv_not_possible = 1
err_otf_mc_noendmarker = 2
OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*ENDFORM. "convert_otf_2_pdf -
Report output to convert to pdf and mail it to recepient
Hi
I'm using the below coding for converting the output of the program to pdf and then mail it to the recepient.The coding works for background processsing only can i do the same for online.In the write statement i'm using the sy-repid my program name and when i get the pdf mail i'm getting the name of the program but instead i need to get the output of my program.Can any one help me in correcting the coding to get the output in pdf format.I know where i'm going wrong but this is the first time i'm working with this so new to this....It would be better if i could run the program and get the convertions into pdf through mail instead of background processing.....Please change the coding below to get the same.....
DATA: gd_recsize TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
Write statement to represent report output. Spool request is created
if write statement is executed in background. This could also be an
ALV grid which would be converted to PDF without any extra effort
WRITE sy-repid.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
Alternative way could be to submit another program and store spool
id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
to sap-spool
spool parameters %_print
archive parameters %_print
without spool dynpro
and return.
Get spool id from program called above
IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
if p_delspl EQ 'X'.
PERFORM delete_spool.
endif.
IF sy-sysid = c_dev.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool'
'request to be created.'.
ENDIF.
FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
FORM get_job_details *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
perform send_email using p_email2.
ENDFORM.
FORM send_email *
--> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject = 'Branch Revenue'.
gd_attachment_desc = 'Branch Revenue'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Branch Revenue,Profit and Commissions'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
using p_email
'Branch Revenue'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables it_message
it_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Thanks in advance.....Hi
Below is the code I was used to convert the sap script( Sales Order) to convert to PDf and send as an attachment.
Dev/UDD Id : EUR-770416 *
Author : M.Sreeram Kumar *
Date : 08-Apr-07 *
Request : DU1K933766
Description: Send an order confirmation to the multiple user in a *
PDF format via Email. *
Change Log *
Author : *
Date : *
Description : *
Request : *
Print of an order confirmation by SAPscript
REPORT zrep_email LINE-COUNT 100 MESSAGE-ID vn.
TABLES: komk, "Communicationarea for conditions
komp, "Communicationarea for conditions
komvd, "Communicationarea for conditions
vbco3, "Communicationarea for view
vbdka, "Headerview
vbdpa, "Itemview
vbdpau, "Subitemnumbers
conf_out, "Configuration data
sadr, "Addresses
tvag, "Reason for rejection
vedka, "Servicecontract head data
vedpa, "Servicecontract position data
vedkn, "Servicecontract head notice data
vedpn, "Servicecontract pos. notice data
vbpa, "Sales Document: Partner
kna1, "General Data in Customer Master
riserls, "Serialnumbers
komser, "Serialnumbers for print
tvbur, "Sales office
tvko, "Sales organisation
adrs, "Communicationarea for Address
fpltdr. "billing schedules
INCLUDE zrep_rvadtabl.
*INCLUDE yzrvadtabl.
*INCLUDE RVADTABL.
INCLUDE zrep_rvdirekt.
*INCLUDE yzrvdirekt.
*INCLUDE RVDIREKT.
INCLUDE zrep_vedadata.
*INCLUDE yzvedadata.
*INCLUDE VEDADATA.
DATA: retcode LIKE sy-subrc. "Returncode
DATA: repeat(1) TYPE c.
DATA: xscreen(1) TYPE c. "Output on printer or screen
DATA: BEGIN OF steu, "Controldata for output
vdkex(1) TYPE c,
vdpex(1) TYPE c,
kbkex(1) TYPE c,
kbpex(1) TYPE c,
END OF steu.
DATA: BEGIN OF tvbdpa OCCURS 0. "Internal table for items
INCLUDE STRUCTURE vbdpa.
DATA: END OF tvbdpa.
DATA: BEGIN OF tkomv OCCURS 50.
INCLUDE STRUCTURE komv.
DATA: END OF tkomv.
DATA: BEGIN OF tkomvd OCCURS 50.
INCLUDE STRUCTURE komvd.
DATA: END OF tkomvd.
DATA: BEGIN OF tvbdpau OCCURS 5.
INCLUDE STRUCTURE vbdpau.
DATA: END OF tvbdpau.
DATA: BEGIN OF tkomcon OCCURS 50.
INCLUDE STRUCTURE conf_out.
DATA: END OF tkomcon.
DATA: BEGIN OF tkomservh OCCURS 1.
INCLUDE STRUCTURE vedka.
DATA: END OF tkomservh.
DATA: BEGIN OF tkomservp OCCURS 5.
INCLUDE STRUCTURE vedpa.
DATA: END OF tkomservp.
DATA: BEGIN OF tkomservhn OCCURS 5.
INCLUDE STRUCTURE vedkn.
DATA: END OF tkomservhn.
DATA: BEGIN OF tkomservpn OCCURS 5.
INCLUDE STRUCTURE vedpn.
DATA: END OF tkomservpn.
DATA: BEGIN OF tkomser OCCURS 5.
INCLUDE STRUCTURE riserls.
DATA: END OF tkomser.
DATA: BEGIN OF tkomser_print OCCURS 5.
INCLUDE STRUCTURE komser.
DATA: END OF tkomser_print.
DATA: BEGIN OF tfpltdr OCCURS 5.
INCLUDE STRUCTURE fpltdr.
DATA: END OF tfpltdr.
DATA: pr_kappl(01) TYPE c VALUE 'V'. "Application for pricing
DATA: BEGIN OF char_val OCCURS 0,
atnam LIKE cabn-atnam,
atwrt LIKE ausp-atwrt,
END OF char_val.
FORM entry USING return_code us_screen.
CLEAR retcode.
xscreen = us_screen.
PERFORM processing.
IF retcode NE 0.
return_code = 1.
ELSE.
return_code = 0.
ENDIF.
ENDFORM. "ENTRY
FORM PROCESSING *
FORM processing.
PERFORM get_data.
CHECK retcode = 0.
PERFORM form_open USING xscreen vbdka-land1.
CHECK retcode = 0.
PERFORM logo_selection.
PERFORM form_title_print.
CHECK retcode = 0.
PERFORM write_header_info.
PERFORM validity_print.
CHECK retcode = 0.
PERFORM header_data_print.
CHECK retcode = 0.
PERFORM header_serv_print.
CHECK retcode = 0.
PERFORM header_notice_print.
CHECK retcode = 0.
PERFORM header_inter_print.
CHECK retcode = 0.
PERFORM header_text_print.
CHECK retcode = 0.
PERFORM item_print.
CHECK retcode = 0.
PERFORM end_print.
CHECK retcode = 0.
PERFORM form_close.
CHECK retcode = 0.
PERFORM zemail_process.
ENDFORM. "PROCESSING
S U B R O U T I N E S *
FORM ALTERNATIVE_ITEM *
A text is printed, if the item is an alternative item. *
FORM alternative_item.
CHECK vbdpa-grpos CN '0'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ALTERNATIVE_ITEM'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "ALTERNATIVE_ITEM
FORM CHECK_REPEAT *
A text is printed, if it is a repeat print for the document. *
FORM check_repeat.
CLEAR repeat.
SELECT * INTO *nast FROM nast WHERE kappl = nast-kappl
AND objky = nast-objky
AND kschl = nast-kschl
AND spras = nast-spras
AND parnr = nast-parnr
AND parvw = nast-parvw
AND nacha BETWEEN '1' AND '4'.
CHECK *nast-vstat = '1'.
repeat = 'X'.
EXIT.
ENDSELECT.
ENDFORM. "CHECK_REPEAT
FORM DELIVERY_DATE *
If the delivery date in the item is different to the header *
date and there are no scheduled quantities, the delivery date *
is printed in the item block. *
FORM delivery_date.
IF vbdka-lfdat = space AND
vbdpa-lfdat NE space AND
vbdpa-etenr_da = space.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_DELIVERY_DATE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDFORM. "DELIVERY_DATE
FORM DIFFERENT_CONSIGNEE *
If the consignee in the item is different to the header con- *
signee, it is printed by this routine. *
FORM different_consignee.
CHECK vbdka-name1_we NE vbdpa-name1_we
OR vbdka-name2_we NE vbdpa-name2_we
OR vbdka-name3_we NE vbdpa-name3_we
OR vbdka-name4_we NE vbdpa-name4_we.
CHECK vbdpa-name1_we NE space
OR vbdpa-name2_we NE space
OR vbdpa-name3_we NE space
OR vbdpa-name4_we NE space.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_CONSIGNEE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "DIFFERENT_CONSIGNEE
FORM DIFFERENT_REFERENCE_NO *
If the reference number in the item is different to the header*
reference number, it is printed by this routine. *
FORM different_reference_no.
CHECK vbdpa-vbeln_vang NE vbdka-vbeln_vang
OR vbdpa-vbtyp_vang NE vbdka-vbtyp_vang.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_REFERENCE_NO'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "DIFFERENT_REFERENCE_NO
FORM DIFFERENT_TERMS *
If the terms in the item are different to the header terms, *
they are printed by this routine. *
FORM different_terms.
DATA: us_vposn LIKE vedpa-vposn.
DATA: us_text(1) TYPE c. "Flag for Noticetext was printed
IF vbdpa-zterm NE vbdka-zterm AND
vbdpa-zterm NE space.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_PAYMENT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
IF vbdpa-inco1 NE space.
IF vbdpa-inco1 NE vbdka-inco1 OR
vbdpa-inco2 NE vbdka-inco2.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_DELIVERY'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDIF.
Print different validity-data for the position
READ TABLE tkomservp WITH KEY vbdpa-posnr.
IF sy-subrc EQ 0.
vedpa = tkomservp.
IF vedpa-vbegdat NE space AND
vedpa-venddat NE space AND
NOT vedpa-vbegdat IS INITIAL AND
NOT vedpa-venddat IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_SERV1'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSEIF vedpa-vbegdat NE space AND
NOT vedpa-vbegdat IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_SERV2'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_SERV3'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDIF.
Notice-rules for the positions.
MOVE vbdpa-posnr TO us_vposn.
CLEAR us_text.
LOOP AT tkomservpn WHERE vposn = us_vposn.
vedpn = tkomservpn.
IF us_text IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_NOTTXT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
us_text = charx.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_NOTICE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDLOOP.
IF NOT us_text IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'EMPTY_LINE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDFORM. "DIFFERENT_TERMS
FORM END_PRINT *
FORM end_print.
PERFORM get_header_prices.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'PROTECT'.
PERFORM header_price_print.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'END_VALUES'.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'ENDPROTECT'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'SUPPLEMENT_TEXT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "END_PRINT
FORM FORM_CLOSE *
End of printing the form *
FORM form_close.
CALL FUNCTION 'CLOSE_FORM'
EXCEPTIONS
OTHERS = 1.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT =
RDI_RESULT =
TABLES
otfdata = t_otfdata
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
CODEPAGE = 5
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF sy-subrc NE 0.
PERFORM protocol_update.
retcode = 1.
ENDIF.
SET COUNTRY space.
ENDFORM. "FORM_CLOSE
FORM FORM_OPEN *
Start of printing the form *
--> US_SCREEN Output on screen *
' ' = printer *
'X' = screen *
--> US_COUNTRY County for telecommunication and SET COUNTRY *
FORM form_open USING us_screen us_country.
INCLUDE zrep_rvadopfo.
INCLUDE yzrvadopfo.
INCLUDE RVADOPFO.
ENDFORM. "FORM_OPEN
FORM FORM_TITLE_PRINT *
Printing of the form title depending of the field VBTYP *
FORM form_title_print.
CASE vbdka-vbtyp.
WHEN 'A'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_A'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'B'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_B'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'C'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_C'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'E'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_E'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'F'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_F'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'G'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_F'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'H'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_H'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'K'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_K'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'L'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_L'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN OTHERS.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_OTHERS'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDCASE.
IF repeat NE space.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'REPEAT'
window = 'REPEAT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDFORM. "FORM_TITLE_PRINT
FORM GET_DATA *
General provision of data for the form *
FORM get_data.
DATA: us_veda_vbeln LIKE veda-vbeln.
DATA: us_veda_posnr_low LIKE veda-vposn.
CALL FUNCTION 'RV_PRICE_PRINT_REFRESH'
TABLES
tkomv = tkomv.
CLEAR komk.
CLEAR komp.
vbco3-mandt = sy-mandt.
vbco3-spras = nast-spras.
vbco3-vbeln = nast-objky.
vbco3-kunde = nast-parnr.
vbco3-parvw = nast-parvw.
CALL FUNCTION 'RV_DOCUMENT_PRINT_VIEW'
EXPORTING
comwa = vbco3
IMPORTING
kopf = vbdka
TABLES
pos = tvbdpa.
Fetch servicecontract-data and notice-data for head and position.
us_veda_vbeln = vbdka-vbeln.
us_veda_posnr_low = posnr_low.
CALL FUNCTION 'SD_VEDA_GET_PRINT_DATA'
EXPORTING
i_document_number = us_veda_vbeln
i_language = sy-langu
i_posnr_low = us_veda_posnr_low
TABLES
print_data_pos = tkomservp
print_data_head = tkomservh
print_notice_pos = tkomservpn
print_notice_head = tkomservhn.
PERFORM get_controll_data.
PERFORM sender.
PERFORM check_repeat.
PERFORM tvbdpau_create.
ENDFORM. "GET_DATA
FORM GET_ITEM_BILLING_SCHEDULES *
In this routine the billing schedules are fetched from the *
database. *
FORM get_item_billing_schedules.
REFRESH tfpltdr.
CHECK NOT vbdpa-fplnr IS INITIAL.
CALL FUNCTION 'BILLING_SCHED_PRINTVIEW_READ'
EXPORTING
i_fplnr = vbdpa-fplnr
i_language = nast-spras
TABLES
zfpltdr = tfpltdr.
ENDFORM. "GET_ITEM_BILLING_SCHEDULES
*& Form ITEM_BILLING_SCHEDULES_PRINT
This routine prints the billing shedules of a salesdocument *
position. *
FORM item_billing_schedules_print.
DATA: first_line(1) TYPE c.
first_line = charx.
LOOP AT tfpltdr.
fpltdr = tfpltdr.
Output of the following printlines
IF NOT fpltdr-perio IS INITIAL.
periodische Fakturen
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_PERIODIC'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
bei periodischen nur eine Zeile
EXIT.
ELSEIF fpltdr-fareg CA '14'.
prozentuale Teilfakturierung
IF NOT first_line IS INITIAL.
CLEAR first_line.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_PERCENT_HEADER'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_PERCENT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ELSEIF fpltdr-fareg CA '235'.
wertmäßige Teilfakturierung
IF NOT first_line IS INITIAL.
CLEAR first_line.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_VALUE_HEADER'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_VALUE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ELSEIF fpltdr-fareg CA '3'.
Schlußrechnung
ENDIF.
ENDLOOP.
ENDFORM. "ITEM_BILLING_SCHEDULES_PRINT
*eject
FORM GET_ITEM_CHARACTERISTICS *
In this routine the configuration data item is fetched from *
the database. *
FORM get_item_characteristics.
REFRESH tkomcon.
CHECK NOT vbdpa-cuobj IS INITIAL.
CALL FUNCTION 'CUD0_GET_CONFIGURATION' "#EC EXISTS
EXPORTING
instance = vbdpa-cuobj
language = nast-spras
TABLES
configuration = tkomcon
EXCEPTIONS
OTHERS = 4.
ENDFORM. "GET_ITEM_CHARACTERISTICS
FORM GET_ITEM_PRICES *
In this routine the price data for the item is fetched from *
the database. *
FORM get_item_prices.
CLEAR: komp,
tkomv.
IF komk-knumv NE vbdka-knumv.
CLEAR komk.
komk-mandt = sy-mandt.
komk-kalsm = vbdka-kalsm.
komk-kappl = pr_kappl.
komk-waerk = vbdka-waerk.
komk-knumv = vbdka-knumv.
komk-vbtyp = vbdka-vbtyp.
ENDIF.
komp-kposn = vbdpa-posnr.
CALL FUNCTION 'RV_PRICE_PRINT_ITEM'
EXPORTING
comm_head_i = komk
comm_item_i = komp
language = nast-spras
IMPORTING
comm_head_e = komk
comm_item_e = komp
TABLES
tkomv = tkomv
tkomvd = tkomvd.
ENDFORM. "GET_ITEM_PRICES
FORM GET_HEADER_PRICES *
In this routine the price data for the header is fetched from *
the database. *
FORM get_header_prices.
CALL FUNCTION 'RV_PRICE_PRINT_HEAD'
EXPORTING
comm_head_i = komk
language = nast-spras
IMPORTING
comm_head_e = komk
TABLES
tkomv = tkomv
tkomvd = tkomvd.
ENDFORM. "GET_HEADER_PRICES
*& Form HEADER_DATA_PRINT
Printing of header data like terms, weights .... *
FORM header_data_print.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'HEADER_DATA'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. " HEADER_DATA_PRINT
FORM HEADER_PRICE_PRINT *
Printout of the header prices *
FORM header_price_print.
LOOP AT tkomvd.
AT FIRST.
IF komk-supos NE 0.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_SUM'.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'UNDER_LINE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDAT.
komvd = tkomvd.
IF komvd-koaid = 'D'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TAX_LINE'.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'SUM_LINE'.
ENDIF.
ENDLOOP.
DESCRIBE TABLE tkomvd LINES sy-tfill.
IF sy-tfill = 0.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'UNDER_LINE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDFORM. "HEADER_PRICE_PRINT
FORM HEADER_TEXT_PRINT *
Printout of the headertexts *
FORM header_text_print.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'HEADER_TEXT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "HEADER_TEXT_PRINT
FORM ITEM_CHARACERISTICS_PRINT *
Printout of the item characteristics -> configuration *
FORM item_characteristics_print.
LOOP AT tkomcon.
conf_out = tkomcon.
IF sy-tabix = 1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_LINE_CONFIGURATION_HEADER'
EXCEPTIONS
OTHERS = 1.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_LINE_CONFIGURATION'
EXCEPTIONS
OTHERS = 1.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. "ITEM_CHARACTERISTICS_PRINT
FORM ITEM_DELIVERY_CONFIRMATION *
If the delivery date is not confirmed, a text is printed *
FORM item_delivery_confirmation.
CHECK vbdpa-lfdat = space.
CHECK vbdpa-kwmeng NE 0.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_DELIVERY_CONFIRMATION'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "ITEM_DELIVERY_CONFIRMATION
FORM ITEM_PRICE_PRINT *
Printout of the item prices *
FORM item_price_print.
LOOP AT tkomvd.
komvd = tkomvd.
IF sy-tabix = 1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_LINE_PRICE_QUANTITY'.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_LINE_PRICE_TEXT'.
ENDIF.
ENDLOOP.
ENDFORM. "ITEM_PRICE_PRINT
FORM ITEM_PRINT *
Printout of the items *
FORM item_print.
DATA: da_subrc LIKE sy-subrc,
da_dragr LIKE tvag-dragr.
CALL FUNCTION 'WRITE_FORM' "First header
EXPORTING element = 'ITEM_HEADER'
EXCEPTIONS OTHERS = 1.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
CALL FUNCTION 'WRITE_FORM' "Activate header
EXPORTING element = 'ITEM_HEADER'
type = 'TOP'
EXCEPTIONS OTHERS = 1.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
LOOP AT tvbdpa.
vbdpa = tvbdpa.
TVAG lesen um festzustellen ob abgesagte Positionen gedruckt werden
sollen
PERFORM tvag_select(sapmv45a) USING vbdpa-abgru
da_dragr
space
da_subrc.
IF da_dragr EQ space. "Print rejected item?
IF vbdpa-posnr_neu NE space. "Item
PERFORM get_item_serials.
PERFORM get_item_characteristics.
PERFORM get_item_billing_schedules.
PERFORM get_item_prices.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'ENDPROTECT'.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'PROTECT'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_LINE'.
PERFORM item_rejected.
PERFORM item_price_print.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'ENDPROTECT'.
PERFORM item_text_print.
PERFORM item_serials_print.
PERFORM item_characteristics_print.
PERFORM alternative_item.
PERFORM delivery_date.
PERFORM item_delivery_confirmation.
PERFORM item_billing_schedules_print.
PERFORM different_reference_no.
PERFORM different_terms.
PERFORM different_consignee.
PERFORM schedule_header.
PERFORM main_item.
ELSE.
PERFORM schedule_print.
ENDIF.
ENDIF.
ENDLOOP.
CALL FUNCTION 'WRITE_FORM' "Deactivate Header
EXPORTING element = 'ITEM_HEADER'
function = 'DELETE'
type = 'TOP'
EXCEPTIONS OTHERS = 1.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "ITEM_PRINT
FORM ITEM_REJECTED *
A text is printed, if the item is rejected *
FORM item_rejected.
CHECK NOT vbdpa-abgru IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_REJECTED'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "ITEM_REJECTED
FORM MAIN_ITEM *
A text is printed, if the item is a main item * -
Converting smartforms output into PDF
Hi ALL,
How to convert the smartforms output into PDF based form. After executing the form, it should directly open in PDF. How to do this?
Points will be awarded.
Thanks and regards,
vinoth.Hi Vinoth Kumar,
Please go throuh the below procedure and sample Code, this might help you.
Procedure
When we activate the Smartform the system generates a Function Module. The function module name we can get from Smartfrom screen from menubar
Environment => Function Module_Name . In a report we can get this Function module name by calling a Function Module standard SSF_FUNCTION_MODULE_NAME. This function module at runtime calls the FM generated by smartform, which in turn is then used to pass data from the report to Smartform. In the report given below the FM generated is /1BCDWB/SF00000152 . In this FM we can see CONTROL_PARAMETERS in import tab. This is of type SSFCTRLOP. We need to set the GETOTF of this to be X. Setting this field will activate the OTF field in smartform.
In export tab of the FM generated by smartform we can see a parameter JOB_OUTPUT_INFO which is of type SSFCRESCL. The SSFCRESCL is a structure of having one of fields as OTFDATA. OTFDATA in turn is a table of type ITCOO. ITCOO has two fields TDPRINTCOM and TDPRINTPAR. TDPRINTCOM represents command line of OTF format data and TDPRINTPAR contains command parameters of OTF format data.
In every Smartform output in OTF format, TDPRINTCOM begins and ends with //. EP represents the end-of-page value for TDPRINTCOM field.
In addition we need to set few fields at the place where we call this FM(generated by smartform) in our program. While calling this FM we should set control_parameters, output_options, user_settings and job_putput_info fields as shown in program.
Once these settings are done we can call Function Module CONVERT_OTF to convert the OTF data of smartfrom output to PDF data format. Once these are done we can call method cl_gui_fronted_services=>file_save_dialog to specify the directory path where we want to save the output PDF file. After this we can call Function Module GUI_DOWNLOAD to download the PDF file on our local system.
Here is a sample code of program to perform the function.
SAMPLE CODE
*& Report ZAMIT_SMART_FORM_PDF *
REPORT ZAMIT_SMART_FORM_PDF .
data: carr_id type sbook-carrid,
cparam type ssfctrlop,
outop type ssfcompop,
fm_name type rs38l_fnam.
DATA: tab_otf_data TYPE ssfcrescl,
pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE,
tab_otf_final TYPE itcoo OCCURS 0 WITH HEADER LINE,
file_size TYPE i,
bin_filesize TYPE i,
FILE_NAME type string,
File_path type string,
FULL_PATH type string.
parameter: p_custid type scustom-id default 1.
select-options: s_carrid for carr_id default 'LH' to 'LH'.
parameter: p_form type tdsfname default 'ZAMIT_SMART_FORM'.
data: customer type scustom,
bookings type ty_bookings,
connections type ty_connections.
start-of-selection.
suppressing the dialog box for print preview****************************
outop-tddest = 'LP01'.
cparam-no_dialog = 'X'.
cparam-preview = SPACE.
cparam-getotf = 'X'.
select single * from scustom into customer where id = p_custid.
check sy-subrc = 0.
select * from sbook into table bookings
where customid = p_custid
and carrid in s_carrid
order by primary key.
select * from spfli into table connections
for all entries in bookings
where carrid = bookings-carrid
and connid = bookings-connid
order by primary key.
call function 'SSF_FUNCTION_MODULE_NAME'
exporting formname = p_form
variant = ' '
direct_call = ' '
importing fm_name = fm_name
exceptions no_form = 1
no_function_module = 2
others = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
exit.
endif.
Hope this resolves your query.
Reward all the helpful answers.
Regards
calling the generated function module
call function fm_name
exporting
archive_index =
archive_parameters =
control_parameters = cparam
mail_appl_obj =
mail_recipient =
mail_sender =
output_options = outop
user_settings = SPACE
bookings = bookings
customer = customer
connections = connections
importing
document_output_info =
job_output_info = tab_otf_data
job_output_options =
exceptions formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
others = 5.
if sy-subrc <> 0.
error handling
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
tab_otf_final[] = tab_otf_data-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
ARCHIVE_INDEX = ' '
COPYNUMBER = 0
ASCII_BIDI_VIS2LOG = ' '
IMPORTING
bin_filesize = bin_filesize
BIN_FILE =
TABLES
otf = tab_otf_final
lines = pdf_tab
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD cl_gui_frontend_services=>file_save_dialog
EXPORTING
WINDOW_TITLE =
DEFAULT_EXTENSION =
DEFAULT_FILE_NAME =
FILE_FILTER =
INITIAL_DIRECTORY =
WITH_ENCODING =
PROMPT_ON_OVERWRITE = 'X'
CHANGING
filename = FILE_NAME
path = FILE_PATH
fullpath = FULL_PATH
USER_ACTION =
FILE_ENCODING =
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2
NOT_SUPPORTED_BY_GUI = 3
others = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
************downloading the converted PDF data to your local PC*******
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = bin_filesize
filename = FULL_PATH
filetype = 'BIN'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
IMPORTING
filelength = file_size
TABLES
data_tab = pdf_tab
FIELDNAMES =
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22
IF sy-subrc <> 0.
ENDIF. -
ALV output converted into PDF format and send that PDF to user through mail
Hi Experts,
I have report earlier its output was in alv grid.
Now i want that ALV output converted into PDF format.And that PDF output send to user through mail.
Can u please tell how to do?
My code is here(output is displaying in ALV grid).
INCLUDE <icon>.
TYPE-POOLS: slis, kkblo.
TABLES : zmsd_freight_hdr, zmsd_freight_det, zmsd_blinfo, zmsd_diheader.
TABLES : lfa1.
DATA : t_hdr LIKE zmsd_freight_hdr OCCURS 0 WITH HEADER LINE,
T_DET LIKE ZMSD_FREIGHT_DET OCCURS 0 WITH HEADER LINE,
t_bl LIKE zmsd_blinfo OCCURS 0 WITH HEADER LINE,
t_di LIKE zmsd_diheader OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF t_det OCCURS 0.
INCLUDE STRUCTURE zmsd_freight_det.
DATA type(30).
DATA: END OF t_det.
DATA: v_target2(30),
v_zsammg LIKE t_det-zsammg,
v_gsttotal LIKE t_det-zamount.
DATA : BEGIN OF t_data OCCURS 0,
zsammg LIKE zmsd_freight_hdr-zsammg,
zdidbl LIKE zmsd_freight_hdr-zdidbl,
zvkorg LIKE zmsd_freight_hdr-zvkorg,
zinvno LIKE zmsd_freight_hdr-zinvno,
zttlamt LIKE zmsd_freight_hdr-zttlamt,
zstatus LIKE zmsd_freight_hdr-zstatus,
ztype LIKE zmsd_freight_hdr-ztype,
zconfirm LIKE zmsd_freight_hdr-zconfirm,
zconfirmdate LIKE zmsd_freight_hdr-zconfirmdate,
erdat LIKE zmsd_freight_hdr-erdat,
ernam LIKE zmsd_freight_hdr-ernam,
erzet LIKE zmsd_freight_hdr-erzet,
aedat(10),
aenam LIKE zmsd_freight_hdr-aenam,
aezet LIKE zmsd_freight_hdr-aezet,
zline LIKE zmsd_freight_det-zline,
zfptype LIKE zmsd_freight_det-zfptype,
zchrcode LIKE zmsd_freight_det-zchrcode,
zcurcode LIKE zmsd_freight_det-zcurcode,
zqty LIKE zmsd_freight_det-zqty,
zuom LIKE zmsd_freight_det-zuom,
zrate LIKE zmsd_freight_det-zrate,
zamount LIKE zmsd_freight_det-zamount,
zexrate LIKE zmsd_freight_det-zexrate,
zccode LIKE zmsd_blinfo-zccode, "MADK991565
zccode like ZMSD_FREIGHT_HDR-zfcode, "MADK991565
zbldate(10),
zbl LIKE zmsd_blinfo-zbl,
type(3),
waerk LIKE zmsd_freight_det-zcurcode,
zamountl LIKE zmsd_freight_det-zamount,
END OF t_data.
DATA : w_layout TYPE slis_layout_alv,
w_catalog TYPE slis_fieldcat_alv,
t_catalog TYPE slis_t_fieldcat_alv,
w_sort TYPE slis_sortinfo_alv,
t_sort TYPE slis_t_sortinfo_alv.
DATA V_ZINVNO like T_HDR-ZINVNO. "MADK991565
DATA : v_count TYPE i.
SELECTION-SCREEN BEGIN OF BLOCK a0 WITH FRAME TITLE text-001.
PARAMETERS : p_zvkorg LIKE zmsd_freight_hdr-zvkorg OBLIGATORY .
SELECT-OPTIONS : s_zdidbl FOR zmsd_freight_hdr-zdidbl ,
s_zccode FOR lfa1-lifnr ,
s_status FOR zmsd_freight_hdr-zstatus ,
s_ztype FOR zmsd_freight_hdr-ztype ,
s_erdat FOR zmsd_freight_hdr-erdat ,
s_ernam FOR zmsd_freight_hdr-ernam ,
s_zconfd FOR zmsd_freight_hdr-zconfirmdate .
PARAMETERS : p_zconf AS CHECKBOX .
SELECTION-SCREEN END OF BLOCK a0.
SELECTION-SCREEN BEGIN OF BLOCK a1 WITH FRAME TITLE text-002.
PARAMETERS : p_hdr RADIOBUTTON GROUP rad DEFAULT 'X' ,
p_det RADIOBUTTON GROUP rad .
SELECTION-SCREEN END OF BLOCK a1.
INITIALIZATION.
AT SELECTION-SCREEN.
START-OF-SELECTION.
PERFORM get_data.
PERFORM process.
PERFORM display.
END-OF-SELECTION.
PERFORM fm_get_num_pages.
AT USER-COMMAND.
AT LINE-SELECTION.
TOP-OF-PAGE.
PERFORM fm_top_of_page USING '7010' sy-title space.
FORM get_data.
SELECT *
FROM zmsd_freight_hdr
INTO TABLE t_hdr
WHERE zvkorg EQ p_zvkorg
AND zdidbl IN s_zdidbl
AND zstatus IN s_status
AND ztype IN s_ztype
AND erdat IN s_erdat
AND ernam IN s_ernam
AND zconfirmdate IN s_zconfd
AND ZFCODE IN S_ZCCODE. "MADK991565
IF p_zconf = 'X'.
DELETE t_hdr WHERE zconfirm NE 'C'.
ENDIF.
CHECK NOT t_hdr[] IS INITIAL.
SELECT *
FROM zmsd_blinfo
INTO TABLE t_bl
FOR ALL ENTRIES IN t_hdr
WHERE zsammg = t_hdr-zsammg.
SORT t_bl BY zsammg.
SELECT *
FROM zmsd_diheader
INTO TABLE t_di
FOR ALL ENTRIES IN t_hdr
WHERE zsammg = t_hdr-zsammg.
SORT t_di BY zsammg.
IF P_DET = 'X'. "MADK933361
SELECT *
FROM zmsd_freight_det
INTO TABLE t_det
FOR ALL ENTRIES IN t_hdr
WHERE zsammg = t_hdr-zsammg
AND ZINVNO = T_HDR-ZINVNO . "MADK991565
SORT t_det BY zsammg zline. "MADK991565
SORT T_DET BY ZSAMMG ZINVNO ZLINE. "MADK991565
ENDIF. "MADK933361
ENDFORM.
FORM process.
REFRESH t_data.
CLEAR v_gsttotal. "MADK933361
LOOP AT t_hdr.
Start of MADK933361
CLEAR: v_target2.
v_zsammg = t_hdr-zsammg.
V_ZINVNO = T_HDR-ZINVNO. "MADK991565
AT NEW zsammg. "MADK991565
AT NEW ZINVNO. "MADK991565
PERFORM get_gst_value.
ENDAT.
End of MADK933361
PERFORM move_header.
CHECK t_data-zccode IN s_zccode.
IF p_det = 'X'.
CSF Project Changes Starts DEV34 MADK985782
LOOP AT T_DET WHERE ZSAMMG = T_HDR-ZSAMMG..
LOOP AT t_det WHERE zsammg = t_hdr-zsammg AND
zinvno = t_hdr-zinvno.
CSF Project Changes Ends DEV34 MADK985782
PERFORM move_header.
CHECK t_data-zccode IN s_zccode.
MOVE-CORRESPONDING t_det TO t_data.
t_data-zamountl = t_data-zamount * t_data-zexrate.
APPEND t_data.
CLEAR t_data.
ENDLOOP.
ELSE.
APPEND t_data.
CLEAR t_data.
ENDIF.
AT END OF zsammg.
CLEAR v_gsttotal.
ENDAT.
*Start of changes for IS090901289-PIA MADK991565
AT END OF ZINVNO.
CLEAR V_GSTTOTAL.
ENDAT.
*End of changes for IS090901289-PIA MADK991565
ENDLOOP.
ENDFORM.
FORM move_header.
MOVE-CORRESPONDING t_hdr TO t_data.
t_data-zttlamt = t_data-zttlamt + v_gsttotal. "MADK933361
t_data-waerk = 'SGD'.
IF NOT t_hdr-aedat IS INITIAL.
WRITE: t_hdr-aedat TO t_data-aedat.
ELSE.
CLEAR : t_data-aedat.
ENDIF.
READ TABLE t_bl WITH KEY zsammg = t_hdr-zsammg BINARY SEARCH.
IF sy-subrc EQ 0.
t_data-zccode = t_bl-zccode. "MADK991565
T_DATA-ZCCODE = T_HDR-ZFCODE. "MADK991565
IF NOT t_bl-zbldate IS INITIAL.
WRITE: t_bl-zbldate TO t_data-zbldate.
ENDIF.
t_data-zbl = t_bl-zbl.
t_data-type = 'DBL'.
ELSE.
READ TABLE t_di WITH KEY zsammg = t_hdr-zsammg BINARY SEARCH.
IF sy-subrc EQ 0.
t_data-zccode = t_di-zdiforcode. "MADK991565
T_DATA-ZCCODE = T_HDR-ZFCODE. "MADK991565
t_data-type = 'DI'.
ENDIF.
ENDIF.
ENDFORM.
FORM display.
IF t_data[] IS INITIAL.
MESSAGE s398(00) WITH 'No Data Selected'.
EXIT.
ENDIF.
DATA : l_repid LIKE sy-repid.
l_repid = sy-repid.
REFRESH t_catalog.
CLEAR t_catalog.
w_layout-cell_merge = 'X'.
PERFORM map_fields.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = l_repid
i_callback_user_command = 'ALV_USER_COMMAND'
is_layout = w_layout
it_fieldcat = t_catalog[]
i_grid_title = sy-title
i_save = 'A'
it_sort = t_sort[]
TABLES
t_outtab = t_data
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
ENDFORM.
FORM map_fields.
Sort Order
CLEAR v_count.
PERFORM sf USING 'ZDIDBL' 'X' 'X'.
Fields to be displayed
CLEAR v_count.
IF p_hdr = 'X'.
PERFORM af USING :
DESCRIPTION FIELD LEN RTABLE RFIELD
'DI/DBL ' 'ZDIDBL' '14' ' ' ' ',
'Type ' 'TYPE' '04' ' ' ' ',
'Forwarder Code ' 'ZCCODE' '14' ' ' ' ',
'BL Number ' 'ZBL' '14' ' ' ' ',
'BL Date ' 'ZBLDATE' '10' ' ' ' ',
'Invoice Number ' 'ZINVNO' '15' ' ' ' ',
'Extraction ' 'ZSTATUS' '05' 'ZMSD_FREIGHT_HDR' 'ZSTATUS ',
'Freight Type ' 'ZTYPE' '05' 'ZMSD_FREIGHT_HDR' 'ZTYPE ',
'Confirmation ' 'ZCONFIRM' '05' 'ZMSD_FREIGHT_HDR' 'ZCONFIRM',
'Confirm Date ' 'ZCONFIRMDATE' '10' 'ZMSD_FREIGHT_HDR'
'ZCONFIRMDATE',
'Total Amount ' 'ZTTLAMT' '18' ' ' ' ',
'Created On ' 'ERDAT' '10' ' ' ' ',
'Created By ' 'ERNAM' '10' ' ' ' ',
'Changed On ' 'AEDAT' '10' ' ' ' ',
'Changed By ' 'AENAM' '10' ' ' ' '.
ELSE.
PERFORM af USING :
DESCRIPTION FIELD LEN RTABLE RFIELD
'DI/DBL ' 'ZDIDBL' '14' ' ' ' ',
'Type ' 'TYPE' '04' ' ' ' ',
'Forwarder Code ' 'ZCCODE' '14' ' ' ' ',
'BL Number ' 'ZBL' '14' ' ' ' ',
'BL Date ' 'ZBLDATE' '10' ' ' ' ',
'Invoice Number ' 'ZINVNO' '15' ' ' ' ',
'Extraction ' 'ZSTATUS' '05' 'ZMSD_FREIGHT_HDR' 'ZSTATUS ',
'Freight Type ' 'ZTYPE' '05' 'ZMSD_FREIGHT_HDR' 'ZTYPE ',
'Confirmation ' 'ZCONFIRM' '05' 'ZMSD_FREIGHT_HDR' 'ZCONFIRM',
'Confirm Date ' 'ZCONFIRMDATE' '10' 'ZMSD_FREIGHT_HDR'
'ZCONFIRMDATE',
'Total Amount ' 'ZTTLAMT' '18' ' ' ' ',
'Freight Payment ' 'ZFPTYPE' '14' ' ' ' ',
'Charge Code ' 'ZCHRCODE' '10' ' ' ' ',
'Currency ' 'ZCURCODE' '08' ' ' ' ',
'Quantity ' 'ZQTY' '13' ' ' ' ',
'UoM ' 'ZUOM' '04' ' ' ' ',
'Rate ' 'ZRATE' '15' ' ' ' ',
'Amt(Foreign Curr)' 'ZAMOUNT' '16' ' ' ' ',
'Exchange Rate ' 'ZEXRATE' '13' ' ' ' ',
'Amt(Local Curr) ' 'ZAMOUNTL' '16' ' ' ' ',
'Created On ' 'ERDAT' '10' ' ' ' ',
'Created By ' 'ERNAM' '10' ' ' ' ',
'Changed On ' 'AEDAT' '10' ' ' ' ',
'Changed By ' 'AENAM' '10' ' ' ' '.
ENDIF.
ENDFORM.
FORM af USING text
field
len
table
reffield.
v_count = v_count + 1.
w_catalog-col_pos = v_count.
w_catalog-fieldname = field.
w_catalog-ref_tabname = table.
w_catalog-ref_fieldname = reffield.
w_catalog-seltext_s = text.
w_catalog-seltext_m = text.
w_catalog-seltext_l = text.
w_catalog-outputlen = len.
IF field = 'ZTTLAMT' OR field = 'ZAMOUNTL'.
w_catalog-no_zero = 'X'.
w_catalog-cfieldname = 'WAERK'.
w_catalog-datatype = 'CURR'.
ENDIF.
IF FIELD = 'ZRATE' OR FIELD = 'ZAMOUNT'.
IF field = 'ZAMOUNT'.
w_catalog-no_zero = 'X'.
w_catalog-cfieldname = 'ZCURCODE'.
w_catalog-datatype = 'CURR'.
ENDIF.
IF field = 'ZQTY' OR field = 'ZRATE'.
w_catalog-no_zero = 'X'.
w_catalog-datatype = 'DEC'.
ENDIF.
APPEND w_catalog TO t_catalog.
CLEAR w_catalog.
ENDFORM.
FORM sf USING fieldname sortup group.
v_count = v_count + 1.
CLEAR w_sort.
w_sort-fieldname = fieldname.
w_sort-spos = v_count.
w_sort-up = sortup.
w_sort-group = group.
APPEND w_sort TO t_sort.
ENDFORM.
FORM alv_user_command USING in_ucomm LIKE sy-ucomm
in_selfield TYPE slis_selfield.
DATA: lfs_data LIKE t_data.
IF in_ucomm = '&IC1'.
READ TABLE t_data INDEX in_selfield-tabindex INTO lfs_data.
CHECK NOT lfs_data-zdidbl IS INITIAL.
IF lfs_data-type = 'DBL'.
DATA: l_zdbl LIKE zmsd_diheader-zdinum.
l_zdbl = in_selfield-value.
EXPORT l_zdbl TO MEMORY ID 'VBL'.
CALL TRANSACTION 'ZMSD_BL01'.
ENDIF.
IF lfs_data-type = 'DI'.
DATA: v_dinum LIKE zmsd_diheader-zdinum.
v_dinum = in_selfield-value.
EXPORT v_dinum TO MEMORY ID 'VDI'.
CALL TRANSACTION 'ZMSD_DI01'.
ENDIF.
ENDIF.
ENDFORM.
FORM get_gst_value.
LOOP AT t_det WHERE zsammg = v_zsammg
AND ZINVNO = V_ZINVNO. "MADK991565
CHECK t_data-zccode IN s_zccode.
t_det-zamount = t_det-zamount * t_det-zexrate.
SELECT SINGLE y0mmtarget2
INTO v_target2
FROM y0mmipstranslate
WHERE y0mmdatatype = '70' AND
y0mmsource = t_det-zchrcode.
SELECT SINGLE y0mmtarget1
INTO t_det-type
FROM y0mmipstranslate
WHERE y0mmdatatype = '76' AND
y0mmsource = v_target2.
IF t_det-type NE '3Z'.
v_gsttotal = v_gsttotal +
( t_det-zamount * 5 / 100 ).
ENDIF.
ENDLOOP.
Regards,
Raj.Hello,
Following is the procedure to convert alv output to spool and then it to PDF Format.
After we display the ALV, we can check whether it is running in the background using system field u2018sy-batchu2018. Then,we call an function module named u2018GET_JOB_RUNTIME_INFOu2019 to get the current job information. Then go to spool request table tbtcp to get the spool id.
Get current job details
CALL FUNCTION u2018GET_JOB_RUNTIME_INFOu2019
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> u20180000000000u2032
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
Finally, we can call function module u2018CONVERT_ABAPSPOOLJOB_2_PDFu2018 to convert spool reqeust(which is stored in OTF format) to PDF format. Then we can call either function module u2018SO_DOCUMENT_SEND_API1u2032 or SAP BCS (Business Communication Service) to send the pdf as an email attachment.
CALL FUNCTION u2018CONVERT_ABAPSPOOLJOB_2_PDFu2019
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
Regards,
Sayali
Edited by: Sayali Paradkar on Apr 20, 2010 12:51 PM -
Alignment problem in converting smartform printpreview into PDF
Hi all,
I am getting some alignment problem in converting smartform printpreview into PDF format, i.e the format of PDF is different from printpreviw of smartform.
kindly suggest something so that alignment is not changed while converting to PDF.
Regards,
Sumalathause below f.m to convert it into 255 characters....
CALL FUNCTION 'QCE1_CONVERT'
TABLES
t_source_tab = i_tline
t_target_tab = so_ali[]
EXCEPTIONS
convert_not_possible = 1
OTHERS = 2. -
Script Converting into PDF and Sent by Mail -
Hi Experts,
I have faced one problem in Script Converting into PDF format and Sent it thro Mail.
I have used to SX_OBJECT_CONVERT_OTF_PDF FM to convert into PDF format.
and I have used SO_NEW_DOCUMENT_ATT_SEND_API1 FM for sending a Mail.
Now my Problem is, How is use these FM s Correctly. what are the parameters to be passed to send a mail.
Kindly give the Coding for sending a Mail using these above FMs .
With Thanks,
Neptune.Mhi use this...this is good for sending a smartform in pdf format to spool..
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver,
p_sender LIKE somlreci1-receiver,
p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
Write statement to represent report output. Spool request is created
if write statement is executed in background. This could also be an
ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
Alternative way could be to submit another program and store spool
id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
to sap-spool
spool parameters %_print
archive parameters %_print
without spool dynpro
and return.
Get spool id from program called above
IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
if p_delspl EQ 'X'.
PERFORM delete_spool.
endif.
IF sy-sysid = c_dev.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool',
'request to be created.'.
ENDIF.
FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
FORM get_job_details *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
perform send_email using p_email2.
ENDFORM.
FORM send_email *
--> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = 'Attachname'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
using p_email
'Example .xls documnet attachment'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables it_message
it_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
regards,
venkat. -
Smartform convert to WORD - e-mail/fax
Hi All,
Quickly can we convert Smartform output to Word output. Currently I am doing Smartform converted to PDF and sending that as e-mail/fax. New requirement is to send in word format. Can we convert Samrtform to WORD and send as e-mal/fax?
Thanks in advance.
Regards,
TimCheck this code below ....
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZSD_SFM_ATTACH'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
CALL FUNCTION FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = wa_control
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS = wa_prnctrl
USER_SETTINGS = 'X'
CUST_LINE = gl_cust_line
IMPORTING
DOCUMENT_OUTPUT_INFO = wa_doc_info
JOB_OUTPUT_INFO = wa_outinfo
JOB_OUTPUT_OPTIONS = wa_job_opt
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
t_otf[] = wa_outinfo-otfdata[].
CALL FUNCTION 'CONVERT_OTF_2_PDF'
EXPORTING
USE_OTF_MC_CMD = 'X'
ARCHIVE_INDEX =
IMPORTING
BIN_FILESIZE = g_filesize
TABLES
OTF = t_otf
DOCTAB_ARCHIVE = t_docs
LINES = i_tline
EXCEPTIONS
ERR_CONV_NOT_POSSIBLE = 1
ERR_OTF_MC_NOENDMARKER = 2
OTHERS = 3
convert PDF 132 to 255
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
No translation
loop at i_tline.
i_objbin-line = i_tline-tdline.
append i_objbin.
endloop.
Convert PDF from 132 to 255.
LOOP AT i_tline.
Replacing space by ~
TRANSLATE i_tline USING ' ~'.
CONCATENATE w_buffer i_tline INTO w_buffer.
ENDLOOP.
Replacing ~ by space
TRANSLATE w_buffer USING '~ '.
DO.
i_record = w_buffer.
Appending 255 characters as a record
APPEND i_record.
SHIFT w_buffer LEFT BY 255 PLACES.
IF w_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
Refresh: i_reclist, i_objtxt, i_objbin, i_objpack.
clear w_objhead.
Object with PDF.
i_objbin[] = i_record[].
loop at i_record.
i_objbin-line = i_record-line.
append i_objbin.
endloop.
DESCRIBE TABLE i_objbin LINES v_lines_bin.
glt_objpack-head_start = 1.
Number of lines of an object header in object packet
glt_objpack-head_num = 0.
Start line of object contents in an object packet
glt_objpack-body_start = 1.
Number of lines of the object contents in an object packet
glt_objpack-body_num = v_lines_txt.
Code for document class
glt_objpack-doc_type = 'RAW'.
APPEND i_objpack.
Packing as PDF.
glt_objpack-transf_bin = 'X'.
glt_objpack-head_start = 1.
glt_objpack-head_num = 1.
glt_objpack-body_start = 1.
glt_objpack-body_num = v_lines_bin.
glt_objpack-doc_type = 'PDF'.
glt_objpack-obj_name = 'ReturnForm'.
CONCATENATE 'ReturnForm_output' '.pdf'
INTO glt_objpack-obj_descr.
glt_objpack-doc_size = v_lines_bin * 255.
APPEND glt_objpack.
glt_objhead = 'Return_form.PDF'. append glt_objhead.
Document information.
CLEAR i_reclist.
Fill the receiver list
clear gs_reclist.
condense gl_fax_num.
gs_reclist-receiver = P_Z_MFR_MAIL.
gs_reclist-rec_type = co_u.
append gs_reclist to i_reclist.
Sending mail.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = gl_doc_chng
put_in_outbox = 'X'
COMMIT_WORK = 'X'
TABLES
packing_list = glt_objpack
object_header = glt_objhead
CONTENTS_BIN = i_objbin
contents_hex = i_objbin
contents_txt = gt_objcont
receivers = i_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8. -
Send an smartform as body of a mail
Hello,
I would like know if there is another way of doing this: "Send an smartform as body of a mail". Now it is sending attached as pdf but the user prefers to view the smartform on the body of the message.
This is a CS formulary and I think that (perhaps) at the options of "output_options TYPE ssfcompop," should be another of this.
ThanksI have included our code to process/send our smartform via email. you should be able to see the solution in there.....
form process_webform
* activate XSF Output Mode
ls_output_options-xsf = c_charx. " XSF Output active
ls_output_options-xsfcmode = c_charx. " Get XSF params from program
ls_output_options-xsfoutmode = c_application. " Application
ls_output_options-xsfformat = c_charx. " Formatting ON
clear ls_output_options-xsfoutdev.
ls_xsfparam_line-name = 'GRAPHICS'.
ls_xsfparam_line-value = 'EXTRACT'.
append ls_xsfparam_line to ls_output_options-xsfpars.
ls_xsfparam_line-name = 'GRAPHICS-DIRECTORY'. "#EC NOTEXT
ls_xsfparam_line-value = c_gr_dir.
append ls_xsfparam_line to ls_output_options-xsfpars.
ls_xsfparam_line-name = 'CONTENT-ID'. "#EC NOTEXT
ls_xsfparam_line-value = 'ENABLE'. "#EC NOTEXT
append ls_xsfparam_line to ls_output_options-xsfpars.
* silent mode ON
ls_output_options-tdimmed = space.
ls_output_options-tdnewid = space.
ls_control_parameters-no_dialog = c_charx.
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = pi_form
importing
fm_name = l_fm_name
exceptions
no_form = 1
no_function_module = 2
others = 3.
if sy-subrc <> 0.
* error handling
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
exit.
endif.
call function l_fm_name
exporting
control_parameters = ls_control_parameters
output_options = ls_output_options
user_settings = space
importing
job_output_info = ls_output_data
exceptions
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
others = 5.
if sy-subrc <> 0.
* error handling
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
po_html = ls_output_data-xmloutput-trfresult.
po_t_graphics = ls_output_data-xmloutput-xsfgr.
endform. "process_webform
form send_webform
clear l_html_xstr.
loop at pi_s_html-content into l_html_raw.
concatenate l_html_xstr l_html_raw into l_html_xstr in byte mode.
endloop.
l_html_xstr = l_html_xstr(gs_html_data-length).
call function 'SCP_TRANSLATE_CHARS'
exporting
inbuff = l_html_xstr
incode = '4110' " utf-8
csubst = c_charx
substc_space = c_charx
importing
outbuff = l_html_str
outused = l_html_len
exceptions
others = 1.
if sy-subrc ne 0.
"do nothing
endif.
* change encoding utf-8 to latin1
replace all occurrences of 'utf-8' in l_html_str with 'latin1' ignoring case.
replace all occurrences of 'absolute' in l_html_str with 'relative' ignoring case.
replace all occurrences of 'overflow : auto'
in l_html_str with 'overflow : hidden' ignoring case.
* The following code will replace the standard text shown in an html link
* such as (www.sap.com) with the text passed along with the link (contained in
* brackets [ ] ). An example would be: "www.sap.com[Click me]" will then be
* displayed as a link on the email with "... Click me ..." as the text. HTML links
* without brackets will be displayed normally (ie. www.sap.com)+
do.
* Get the length for the entire HTML code for the URL and Name
find '<a href="' in section offset l_aref_end of l_html_str match offset l_aref_start.
if sy-subrc ne 0.
exit.
endif.
find '</a>' in section offset l_aref_start of l_html_str match offset l_aref_end.
l_aref_length = ( l_aref_end + 4 ) - l_aref_start.
* Find the URL/name
l_lnk_start = l_aref_start + 9.
find '">' in section offset l_aref_start of l_html_str match offset l_lnk_end.
l_lnk_length = l_lnk_end - l_lnk_start.
* Save the URL/name
l_link_all = l_html_str+l_lnk_start(l_lnk_length).
* Find where the name starts and ends
find '[' in l_link_all match offset l_name_start.
if sy-subrc ne 0.
continue.
endif.
find ']' in l_link_all match offset l_name_end.
if sy-subrc ne 0.
continue.
endif.
* Seperate out the URL
l_link_url = l_link_all+0(l_name_start).
* Seperate out the name
l_name_start = l_name_start + 1.
l_name_length = l_name_end - l_name_start.
l_link_name = l_link_all+l_name_start(l_name_length).
* Replace the first URL/Name occurence with just the URL
replace first occurrence of l_link_all
in section offset l_aref_start length l_aref_length
of l_html_str with l_link_url.
* Replace the second URL/Name occurence with just the Name - first
* substitute special characters.
replace all occurrences of '&' in l_link_all with '&'.
replace all occurrences of '>' in l_link_all with '>'.
replace all occurrences of '<' in l_link_all with '<'.
replace first occurrence of l_link_all
in section offset l_aref_start length l_aref_length
of l_html_str with l_link_name.
* Reset ending point
l_aref_end = l_aref_end - ( l_lnk_length + 2 ).
enddo.
l_html_len = strlen( l_html_str ).
l_offset = 0.
l_length = 255.
while l_offset < l_html_len.
l_diff = l_html_len - l_offset.
if l_diff > l_length.
ls_soli-line = l_html_str+l_offset(l_length).
else.
ls_soli-line = l_html_str+l_offset(l_diff).
endif.
append ls_soli to lt_soli.
add l_length to l_offset.
endwhile.
create object lo_mime_helper.
call method lo_mime_helper->set_main_html
exporting
content = lt_soli.
loop at pi_t_graphics into gs_graphic.
clear l_gr_xstr.
loop at gs_graphic-content into l_gr_raw.
concatenate l_gr_xstr l_gr_raw-line into l_gr_xstr in byte mode.
endloop.
l_gr_xstr = l_gr_xstr(gs_graphic-length).
l_offset = 0.
l_length = 255.
clear lt_solix[].
while l_offset < gs_graphic-length.
l_diff = gs_graphic-length - l_offset.
if l_diff > l_length.
ls_solix-line = l_gr_xstr+l_offset(l_length).
else.
ls_solix-line = l_gr_xstr+l_offset(l_diff).
endif.
append ls_solix to lt_solix.
add l_length to l_offset.
endwhile.
concatenate c_gr_dir gs_graphic-graphics '.bmp' into l_filename.
concatenate c_gr_dir gs_graphic-graphics '.bmp' into l_content_id.
l_content_type = gs_graphic-httptype.
l_obj_len = gs_graphic-length.
call method lo_mime_helper->add_binary_part
exporting
content = lt_solix
filename = l_filename
extension = 'BMP'
content_type = l_content_type
length = l_obj_len
content_id = l_content_id.
endloop.
try.
l_standard_txt = pi_smartform.
call function 'READ_TEXT'
exporting
id = 'ST'
language = sy-langu
name = l_standard_txt
object = 'TEXT'
tables
lines = lt_lines.
read table lt_lines into ls_lines index 1.
replace '&1' in ls_lines-tdline with pi_belnr.
replace '&2' in ls_lines-tdline with pi_bukrs.
move ls_lines-tdline to l_subject.
lo_doc_bcs = cl_document_bcs=>create_from_multirelated(
i_subject = l_subject
i_multirel_service = lo_mime_helper ).
* Add Attachment
* types: begin of email_docs,
* type type so_obj_tp,
* subject type so_obj_des,
* content_text type soli_tab,
* content_hex type solix_tab,
* end of email_docs.
* types: email_docs_t type standard table of email_docs.
* data: documents type email_docs_t,
* documents_line like line of documents.
* data: soli_tab type soli_tab,
* soli type soli.
* soli = 'This is line one'.
* append soli to soli_tab.
* soli = 'And this is line two'.
* append soli to soli_tab.
* documents_line-type = 'RAW'.
* documents_line-subject = 'Subject'.
* documents_line-content_text = soli_tab.
* append documents_line to documents.
* call method lo_doc_bcs->add_attachment
* EXPORTING
* i_attachment_type = documents_line-type
* i_attachment_subject = documents_line-subject
* i_att_content_text = documents_line-content_text.
catch cx_document_bcs.
* error handling
exit.
catch cx_bcom_mime.
* error handling
exit.
catch cx_gbt_mime.
* error handling
exit.
endtry.
* create send_request
try.
lo_bcs = cl_bcs=>create_persistent( ).
catch cx_send_req_bcs.
* error handling
exit.
endtry.
try.
lo_bcs->set_document( i_document = lo_doc_bcs ).
catch cx_send_req_bcs.
* error handling
exit.
endtry.
* create recipient
if pi_recipient ns '@'.
l_username = pi_recipient.
translate l_username to upper case. "#EC *
try.
lo_recipient = cl_sapuser_bcs=>create( l_username ).
catch cx_address_bcs.
* error handling
exit.
endtry.
else.
l_mail_address = pi_recipient.
try.
lo_recipient = cl_cam_address_bcs=>create_internet_address( i_address_string = l_mail_address ).
catch cx_address_bcs.
* error handling
exit.
endtry.
endif.
try.
lo_bcs->add_recipient( i_recipient = lo_recipient ).
catch cx_send_req_bcs.
* error handling
exit.
endtry.
* send
try.
* RECEIPTS ONLY FOR ERRORS
call method lo_bcs->send_request->set_requested_status
exporting
i_requested_status = 'N'. "#EC NOTEXT
lo_bcs->send( ).
commit work.
catch cx_send_req_bcs.
* error handling
exit.
endtry.
endform. "send_webform -
Mangal Fonts and Tunga Fonts in (MS Home and Student 2010) Word 2010 not getting converted into PDF
Why do I get a totally blank PDF file whenever I try to convert any (Microsoft Office Home and Student 2010, Version: 14.0.6029.1000) Word document file containing either Mangal Fonts (Hindi) and Tunga Fonts (Kannada) into a PDF file (by using Adobe Acrobat X Standard - English, Version: 10.1.4, Program File Size: 1790 MB, Complete/Full Version) after formatting and reinstalling all the necessary software / softwares (Microsoft Windows XP, Home Edition, Version 2002, Service Pack 3 and Windows XP Service Pack 3, Version: 20080414-031525, Program File Size: 9.08 MB)?
I'm using
01) Microsoft Windows XP, Home Edition, Version 2002, Service Pack 3
02) Computer: Intel(R) Pentium(R) 4 CPU 3.00 GHz 3.00 GHz, 504 MB of RAM
03) Windows XP Service Pack 3, Version: 20080414-031525, Program File Size: 9.08 MB
04) Microsoft Office Home and Student 2010, Version: 14.0.6029.1000, Product ID: 82503-388-0792296-26607, Program File Size: 490 MB
05) Adobe Acrobat X Standard - English, Version: 10.1.4, Program File Size: 1790.00 MB, Complete/Full/All Version/Features has/have been installed
06) Windows Internet Explorer 8, Version: 20090308.140743, Program File Size: 4.20 MB
Any Word 2010 document file that has been converted into any PDF File unfortunately does not show either the Mangal (Hindi) Fonts or the Tunga (Kannada) Fonts.
The PDF file will unfortunately become/remain totally/fully/completely blank.
When I convert an Excel Workbook having the Tunga Fonts (Kannada) to/into a PDF File, some of the Tunga fonts in the PDF file are legible and some are unfortunately illegible (get superimposed / overwritten on each other).
Perhaps I may get the same result if I try to convert an Excel Workbook having the Mangal Fonts (Hindi) to/into a PDF File with some Mangal fonts being/becoming legible and the rest being/becoming illegible (getting superimposed / overwritten on each other).
Tanveer
Syed Tanveeruddin, Karnataka, India
Message was edited by: tanveerindian
Message was edited by: tanveerindian
Message was edited by: tanveerindianMy chronological sequence of steps to create a Word 2010 Document or an Excel 2010 Workbook:
I first create a Word Document File or an Excel Workbook File and save it by giving an appropriate file name.
Then I right click on the closed Word Document File or the Excel Workbook File in the file folder and convert it into a PDF by retaining the same/original file name.
The font list of Microsoft Word 2010 claims/says/states that both Mangal and Tunga are True Type fonts and also that these fonts will/would be used on both printer and screen.
In case if there is any text content in English in the beginning it will get converted into PDF only till/until either a Mangal(Hindi)/Tunga(Kannada) Font starts.
The remaining English text content does not get converted into/to PDF the moment a Mangal(Hindi)/Tunga(Kannada) Font starts. If the entire matter is purely (100 per cent) in English text it will fully / completely / totally get converted into a PDF file without any problem.
Message was edited by: tanveerindian -
Problem in converting into PDF
HI,
I need to convert data in PDF format but i am facing problem in it.
i have used 2 methods,
1. i used job_open,job_submit,job_close,BP_JOB_READ to submit job and CONVERT_ABAPSPOOLJOB_2_PDF to convert into pdf format. it is working fine in this case.
2. But when i use SUBMIT program with USING SELECTION-SCREEN 'xxxx' WITH selcrit2 IN 'xxxx'.. and then spool which created i used in FM CONVERT_ABAPSPOOLJOB_2_PDF , it is not converting even though same exporting and importing parameters are passed in this as in above.
Please reply.
Regards,
nehaHi,
First check whether the spool request is working fine or not by just execute any PO or sales order or any print view and from the menu give print there by you will get the spool number, make a note of the spool number.
Go to SE38 and enter the program RSTXPDF4 and execute it will ask for the spool number give the spool number noted earlier and if PDF format is coming means you have some error while configureing the SP01.
Hope my answer helps you.
Cheers!! -
My goal: "convert into pdf" -- the file is instantly saved with the same name as pdf. feasible?
Good evening dear experts,
i use Adobe Acrobat 9 pro extend to convert word, ppt, jepgs etc. into pdfs.
No if i
1) convert a ppt into a pdf: it asks --> "save as" --> converts --> opens the file
2) convert a jpeg into a pdf: it instantly --> opens the file as pdf --> i need to save it manual under "save as"
In both cases i want to
my goal: "convert into pdf" --> the file is instantly saved with the same name as pdf
WITHOUT asking me "save as" + "opening of the file".
Is the possible, and if yes, HOW ?
A fast answer is very very much appreciated, for i have to convert hundreds of files tonight in order to get it into 1 pdf
Thx and greetings from Germany,
JuliaWe are nearly there!
A] - righclick "convert-to-method": @Bill: thx again, your approach worked for ppt, doc-files etc.
2 problems:
1) exception: for jpegs/bmps it doesn't work (the file is still opened after conversion, strange).
2) the output-folder. it only accepts the standard "output-folder documents/*.pdf" (which is a step further but not my end-goal). If i choose another output-folder via "browse", this setting is NOT SAVED (even after clicking on "accept" + "ok").
my goal: the the file should be automatically saved in THE SAME folder the original file is in (seems that can't be achieved and the standard folder is the only thing where to convert in?).
Personal background for understanding: i have many folders with several ppts in it. Once i send it out to a customer, i always have to convert it into a pdf. thats why i want to save time (i know that i can convert it directly + send per mail, but i want an up-to-date copy of the pdf in the folder as well).
B] - "the automated solution"- @Sandeep:
i just watched your link http://tv.adobe.com/watch/acrobat-tips-and-tricks/automating-tasks-in-acrobat/
about batch processing and i think its really helpful if i want to convert ALL of the files in one folder.
1 question regarding this: are the subfolders also affected?
As i understood from the video, i choose 1 "watched folder" and a "destination folder" (can be the same). E.g i have 1 big folder "designs" with many subfolders. I create a batch converting ppts to pdf to "the same folder" Once i run my batch, it converts ppts in the chosen folder "designs" + all subfolders into the same folder, right?
If this is the case, i get too many pdfs, for i only need the latest ppt-version to be converted (copies of old ppts are also in the files) ;(.
Do you have an idea how can i solve this?
Now we are very near to the end-solution of my goal:
i need this option "to the same folder" in my general settings when i convert a file via right-click. ATM it only works with the standard-folder documents/*.pdf
In A], my files are now instantly saved with the same name in 1 specific folder. I would be completely happy, if this folder would be alwys the same as the one with the original file (and not 1 specific folder)
2nd problem with a]: it does not apply to picture files (bmp, jpegs..)
So if we could solve this, i would be a completely happy girl
Guys, you are great, thx again for the whole struggle with my concerns!! -
Output of RFC needs to be converted into PDF format
Hi Experts,
In the ESS screen, we have to provide one link for every employee. When the user will click on the link, one letter in PDF format should be displayed to the user. This PDF will act as a "Address Certificate". The address certificate will contain information related with name, address, passport details etc. How we can achieve this?
In my view, we will have to create one Z-RFC. The ABAPer will create the Z-RFC. Now the input for the Z RFC will be employee no. The output will be Name, Address and Passport details.
The information provided in table format needs to be converted into PDF form. How we can do so? What all services needs to be activated for this?
Regards,
GaryHi Gary,
When you say the ESS screen, what do you mean by this is it ECC side or in Portal Side.
It its in Portal side then, I think you need to create a WebDynpro application which display output through ADOBE forms. For that you need to have basic WebDynpro knowledge.
Apart from that ADS needs to be configured. There are sevrel tutorial available in SDN. For creating a WebDynpro Application with Adobe Interactive forms.
Do let me know if you require more information.
Regards, -
No Microsoft files listed in the settings "convert into PDF files"
Hi, I wanted to convert different Microsoft Office files, but it doesn't work. There are no Microsoft files listed in the settings "convert into PDF files". I had the trial version of Adobe Acrobat Pro XI installed on a MAC in Windows that runs trough Parallels. Hope somebody can help. Thx
Hi Rahul,
many thanks for your suggestion.
Yes, Parallels is a virtual machine on the top of MAC and I can see all files in the Windows Explorer. Also the ones I created on the MAC top with the Microsoft Office Software Word or Excel for MAC as well the ones I created earlier on a Windows PC.
Unfortunately there is no possibility to convert files into PDF format with a click on the right mouse. And Adobe also doesn't open Word documents because it doesn't support this format.
But nonetheless it wouldn't be a solution that I prefer to convert in adavance every single file in a PDF format. I need to create a PDF package from different formats.
I assume this issue has to do something with MAC or Parallels, because this function of the Adobe Versions Acrobat 8 Pro and XI Pro work well on a Windows PC. I just don't understand why there are no Microsoft Office file formats listed in the Adobe settings. This settings also can't be changed. I tried to find out but couldn't find any hint for this problem thus I'm a bit at a loss... Maybe you have another idea?
Regards
Ly -
Submit program to send a smartform to the spool and obtain a PDF
Hi all,
I wanna know if there is a way to submit (execute) a program that print a smartform for print this smartform to the spool and then obtain a PDF file from the spool order.
I wanna do this because the program that allows to print the smartform is already implemented and its logic is complicated, and I need to get the smartform as a PDF to show it into a WDP Java application.
If it's posible to do this, could you explain me how can I do it?
Regards,
Gregory.Hi,
To get the PDF format output of smartform you can try with the following Function Module.Before that you have to declare the function module for calling the smartform.
DATA:
W_bin_filesize TYPE i, " Binary File Size
Internal table to hold the OTF data*
DATA:
t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
Internal table to hold OTF data record from the SMARTFORM
t_otf_from_fm TYPE ssfcrescl,
Internal table to hold the data from the FM CONVERT_OTF
T_pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE.
Function Module CONVERT_OTF is used to convert the OTF format to PDF
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
ARCHIVE_INDEX = ' '
COPYNUMBER = 0
ASCII_BIDI_VIS2LOG = ' '
PDF_DELETE_OTFTAB = ' '
IMPORTING
BIN_FILESIZE = W_bin_filesize
BIN_FILE =
TABLES
otf = T_OTF
lines = T_pdf_tab
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
ERR_BAD_OTF = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Suvajit
Maybe you are looking for
-
The store my iTunes media folder on my external hard drive and can no longer find it there. It seemed to becomd lost after I re-designated the default iTunes media location. I had downloaded some things from iTunes without my external hard drive pl
-
Hello there, I've a little annoying problem with distiller. I'm using a linux program which is creating ps files than transferring into windows and converting to .pdf with distiller. But PS files have this string; stroke showpage savepage this causes
-
Airplay symbol stopped showing on iOS5 devices
Airplay symbol used to show on iPad2 and iPhone4S for use with Apple TV(2). Now it just stopped showing up. I tried reset of ATV. All devices are on the same wireless network. All devices are logged into the same iTunes account. Any suggestions?
-
I have the original 80 gig iPod Classic that is about half full of music I had burned from the old cd collection years ago, it was all on my laptop but that has long since crashed and burned, leaving me with the trusty classic as the only copy, now i
-
VERY URGENT:Query based on data passed by Button event
Hiiiiiiiiiiii friends... I am new to fwk, and its very hard time to me,please help.. I have 2 pages. On first page I am going to enter Pid, then by selecting FIND button I want to execute query for 2nd page for that Pid and get details. I have 2 COs.