Separate sampling rate for two different channels for a USB-6009 daq

Hi,
I am using a USB-6009 and incorporating the 'daq assistant' to change the sample rate. I am trying to find a way to set the sampling rate to two unique values for two separate channels. I've tried setting up two daq assistants and adjusting the sample rate different for each channel, though this does not work. Is there any way to set the sample rate high for all channels then reduce the rate for a different channel - or an alternative? I would appreciate any input on this, thank you!
- Anthony
Solved!
Go to Solution.

All tasks on a DAQ board that use a sampling clock must use the same clock. Therefore, you cannot have two tasks on the same DAQ board sample at different rates.
Alternatives would be:
1. to combine all of the channels into a single task and just accept the extra data
2. get an extra DAQ board to use in parallel
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

Automatic Deployment Rule - One ADR for Two Different Collection for Two Different time Intervals

I have a scenario where two collection of Windows 8.1 is made based on geographical location. One collection is for all the windows 8.1 machines in India and one collection is for all windows 8.1 machines in US. Now I have created one ADR to be deployed
to the Collection for Machines in India with a schedule.
My requirement is that can i use the same ADR for those two collection with different schedule. Say I want ADR to be deployed in India at say 10:PM IST and for US collection at say 10:00 PM PST.
Can I use one ADR with two different schedule and can be deployed to two different collection. Any help will be greatly appreciated.

Couple of "bits" to help you one your patch automation quest:
A ADR is very much a 1:1:1 rule. It creates (or updates) ONE update group, deploys it to ONE collection, and you can provide ONE schedule. While you are more than capable of flipping said deployment time to use local time instead of UTC, in general
it's a very simple set of rules that are dogmatically run.
That said because of the "include" feature of collections it's not that hard to setup a good/robust patching pattern. What I recommend doing is building an ADR for each variance of deployment of patches or enforcement time. for example,
my ADRs look something like this:
Software Updates - Zero day enforced
Software Updates - Critical and Security 1 month enforced
Software Updates - Critical and Security 1 month no reboots
Exact terminology is up to you of course, but I find a good descriptive ADR name saves a lot of confusion. For each ADR I create an identical collection. From there I can use existing collections and a simple "include collection" rule
to bundle things up and make them part of the patching schedule of my choice. Anyone can now go into my "software update" folder, look at my collections, and know exactly what gets patched by what deadline.
Finally, don't be afraid to look into maintenance windows to trim down ADR count. Making a deployment available for a month before it goes enforced, then setting up groups of maintenance windows (one for each Friday of the week for example) can also
accomplish a similar goal by having machines auto-patch during their week but you only using one ADR.
So by having two "types" of collections to manage your patching (one to assign a ADR built by deployment deadlines, the other for exact update windows) you should be able to group most your workstations into a decent patch scheudle without being
too excessive about creating a billion ADRs.

Same query takes different time for two different users with same privileges

Hi,
Just wanted to know if it is possible for an INSERT query to take different amount of time for two different users for the same volume of data. If so, what could be the reason? I would like to add that we are not executing the query simultaneously. But it is always faster for user1(within 10-20 seconds) and slower for user2(takes around 8-10 minutes).

Show execution plan for each user. I think there is other reasons which you didn't not tell

I am trying to store music for two different iPods on the same computer, against two different Apple IDs. When I try and download content from the Cloud I get an error message?

I am trying to store music for two different iPods on the same Windows 8 computer, and when I try and download content from the Cloud I get an error message. Is it possible to have two different Apple IDs on the same computer?

Unfortunately you've discovered too late how important it is to maintain an up-to-date backup of your iTunes library (and all other data of value). You could, before wiping the drive, have considered making use of a commercial data recovery service that could (albeit at considerable cost) have extracted your library from the hard disk, even if virus infected.
In the absence of that option, you will need to restore the content of your library from its original sources:
Depending on your location, you may be able to re-download any iTunes Store purchases that are still available on the Store
Likewise, most digital purchases from Amazon (including auto-rip copies of purchased CDs) should be available from the Amazon Cloud and via the Amazon Music application - the same may be true of other commercial sources for digital downloads
Content imported from your CDs will have to imported again
The specific situation that you describe regarding the music imported from your friend's external HDD suggests that either the source is badly organized and/or originates from a source other than iTunes (other media players may use alternative tags for information like artist, title, album, etc. that are not wholly consistent with how iTunes handle these). Without details of the issues you're seeing it is difficult to suggest a remedy other than going through the media album-by-album, track-by-track, and correcting the inconsistencies.
In the absence of a backup or access to the original library data there is no option other than painstakingly recreating your library as described above. As you do so, you'll now realize how important creating and maintaining backups are - in my case I have at all times three separate duplicates of my library, in two different locations, where none is ever more than a week old compared to the content of my master library.

HT201269 Can I set up two accounts for two different iPhones on the same iTunes account. Jimmy

Hello,
CanI set up two accounts for two different iPhones on the same iTunes account. Thanks JIMMY

http://support.apple.com/kb/ht1495
You can use the same apple id for two separate phoones to share apps/music, however you would need a separate apple id for both phone for imessage/facetime/icloud.

Can i load two different itunes on the same computer for two different ipods?

Can I load two different itunes on my computer for two different ipods? Or how can I get it so that when I click on itunes, only my songs come up and not my wifes? And the same for her.

Yes. The simplest way is to have separate Windows accounts for each user. When either user runs iTunes, he/she will have a separate library with distinct content, playlists, etc., and can sync individual iDevices as needed.

Using Same Bank Account for two different company code

Can we use the same bank account number and ABA key for two different company codes? Both the company codes are in USA and with the same currency.
Scenario is to separate one division of the company code to a separate company code. Client wanted to know if we can use the same bank account so that they dont have to open another bank account

The system will allow the same ABA and bank account on two different company codes. However, if you use electronic bank statement (EBS) functionality (or plan to use it in the future), you will not be able to import bank statements for the account if it exists on two company codes. The EBS program uses the house bank/account ID tables to assign a company code to the bank statement. If the account exists for more than one company code, the program cannot assign a company code and it will give an error.
Regards,
Shannon

Is there a way to have two different iTunes for two different iPhones on one Windows User account?

Using Windows 7, iphone 4.
I've read as many threads on these forums and as many kb's as I could find, but I sttill can't figure it out. I have 2 iPhones. Let's call them, "wife" and "hubby". I want to have two separate iTunes, one for each of the phones. Hubby is the Windoows User. I don't want to set up a different Windows User for wife.
Hubby was the original iPhone. When I plug it in, iTunes recognized it has Hubby's iPhone. Then I unplug Hubby and close iTunes. I plug in Wife but iTunes stll comes up with Hubby under Devices and syncs Hubby's iTunes to Wife's iphone.
I've tried using the shift key when I open iTunes to set up two separate .itl files to no avail.
Is there a way to have two different iTunes for two different iPhones on one Windows User account?
Thanks!

What happens if you rename the iPhone "Wife" when it shows up as "Hubby", then choose a different set of apps/playlists to sync with? iTunes is supposed to be able to manage multiple devices, each with their own selection of content. Perhaps you "restored" "Wife" with a backup from "Hubby" when you first set things up which is now causing confusion.
To create a new library press and hold down the shift key as you click the icon to start iTunes and keep holding shift until asked to choose or create a library. You need to use the same technique to switch back.
tt2

Is it possible to use the same Switch for two different clusters.

I have 10g Rac setup on windows.
Now I am planning to install 11gR2 on different servers.
Is it possible to use the same Switch for two different clusters.

user9198027 wrote:
I have 10g Rac setup on windows.
Now I am planning to install 11gR2 on different servers.
Is it possible to use the same Switch for two different clusters.
Yes. Technically there will not be any conflict as long as the private addresses used by the 2 clusters do not collide, and provided that the switch's port capacity and bandwidth will not be exceeded.
Your NA (netadmin) can also configure the switch to separate the 2 Interconnects from one another (called partitioning when using Infiniband) - if the switch supports such features.
A major consideration is not to make the switch, public. That typically cause a range of problems and can have a serious impact on an Interconnect. But using 2 private networks on the same infrastructure should not have the same problems - if configured and implemented correctly.

Same number range for two different series groups?

Dear all,
There are two scenarios
1.Normal export under bond case, series group is 20 and number range maintained,running number is 300016
2.Another scenario,where ARE1 document generation for Deemed exp customer(already customised) , series group is 30.
But, client requirement is , for this second scenario also, system should pickup running number range of series group 20(under bond case) as per excise legal requirement
Ie running number is for series group 20 is 300016
For the above deemed exp case (second scenario)it should pickup 300017
And again when they do under bond case(first scenario), it should pick up 300018 like that
Is it possible to maintain the same number range for two different series groups(20 and 30)?
Even if you maintain the same number range for 30, as per running number range of 20
Will the system update simultaneously the same number range for 20 and 30 series groups?
Please suggest the way.

With two different series groups, it is not possible to have the same number range. Even if you maintain it, they will be treated independently.
Normally, you should not use different series groups if the same number range has to be used. In fact, the concept of series group has been developed to ensure that number ranges can be maintained separately.
Regards,
Aroop

Same Apple ID for two different country accounts?

Is it possible to use just one Apple ID for two different iTunes accounts? I've recently located to Australia from the uk and want to run an iTunes Store account in each but with just one apple id and email address. Can it be done?

You have to be in a country to use its store (and an account can only have one billing address on it), so whilst you are in Australia you can only use the Australian store, you cannot use the UK store (including redownloading past purchases). You can either update your billing address on your existing account to have your Australian address on it, or create a new account with your Australian billing address on it
Changing country on an account : Change the country of your iTunes Store, App Store, iBooks Store, and Mac App Store account - Apple Support.

Can I have two different libraries for iTunes?

I would like to have two different libraries for iTunes. How can I do it?
Regards.

To create or access a second (or more) library, hold down the Option key (or Shift key in Windows) when launching iTunes 7. In the resulting dialogue you will get the option to create a new library or navigate to the other Library: Using multiple iTunes libraries -Mac
Note: You can only have one Library open at a time and iTunes will default to the last library opened if you don't use the keyboard command to choose one.

How can i upload two different logos for 2 sub sites [which falls under one super site ] in share point 2013 ?

hello,
How can i upload two different logos for 2 sub sites [which falls under one super site ] in share point 2013 ?
thanks,
Jay

Hi,
I understand that it applied first logo to all other sub sites.
Please make sure that you change the logos in the subsites.
If we change the logo in the root site, the logos in the subsites will be changed at the same time.
However, we can change the logo in the subsites separately.
We can go to a subsite, click the Site Sitting-> Look and Feel-> Title, description, and logo->Insert Logo->select a picture, then it will has a different logo than the root site.
Then go to the other subsite, click the Site Sitting-> Look and Feel-> Title, description, and logo->Insert Logo-> select another picture, then it will has a different logo that the first subsite.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

One instance for two different application

Hello,
I have to solve following problem..
need have one instance of object for two different application..fist is standard SE application and second is EE (web)..
SE application is a server..listen on and accepting connection from mobile phone..and EE application need to show list of connected devices and should say to SE application that new device was connected..
I would like to do this without database..only server and web app..
I have thought about RMI..but hope there is more simple solution..
Thanks a lot for your ideas.
Dmitrij

I would like to do this without database..only server and web app..You have your reasons for wanting this to be the case. If you are sure you don't want a DB, then pass the state of the object between the two ends using XML as the transport form. As someone said, you can use JMS or you can write an HTTP POST or probably other transport mechanisms other people will suggest to actually get it over the wire from one side to the other.
As to your question of how to sync state, just make the object you're sharing final after it's been created (on the side that creates it) and make the reference that receives it and holds it final also, after you've reconstructed it from the XML you received.

One PO for two different vendors

Hi Experts ,
My Questions are ......
Can we maintain two different vendors for two different materials and create one PO ? ;
How does it work ?
How is it sent to different Vendors ?.
Will the vendor receive one general PO containing all line item materials from different vendors...or Each vendor will receive his own line item PO (PO Split)...
Regards
Albert

Hi Albert,
Your qns-
Can we maintain two different vendors for two different materials and create one PO ? ;
Yes you can maintain 2 different vendors for 2 different materials. But you cannot create a single PO (i.e. PO with same number) for 2 different vendors. I do not understand why you want to create one PO for 2 vendors supplying different materials. Can you please explain the logic for it?
Vivek

Separate sampling rate for two different channels for a USB-6009 daq

Similar Messages

Maybe you are looking for