Separate Sections of a Sequence with different encoding settings

Hi!
Is it possible to set different encoding settings for different parts of a Final Cut sequence? If yes, what must I do?
Take care,
Christian

All I want to change is the quality setting of the h.264 codec.
It's all about the movies you will find at:
http://www.teachers-corner.org/feeds/TC_RSS.xml
(beware, large files)
All these movies start off with an intro, which needs a quality setting of 75% to look good. The rest of the screencast looks good enough with a setting of 50%.
All other parameters shall remain unchanged.
Did that help?
Take care,
Christian

Similar Messages

  • How can i create a .mov file from image sequence with different durations

    how do u create an image sequence with different durations? image one stays for 10 seconds and image two may stay for 30 and so on. each one has a custom duration. can this be done with an apple script or a text file saved as an mov file?

    Hello Omar,
    The example code Programmatic Printing of TestStand Reports - Modular contains a sequence that will convert an XML file to an HTML file given the XML file's path and the path to the stylesheet.  It may need to be altered to fit with the modifications you have already made to the report generation routines, but I think it should definitely get you off on the right foot.  Let me know if you have any questions!
    NickB
    National Intruments

  • Two sequences with different settings?

    In Premier Pro CS6, is it OK to use two sequences with different settings?

    Yes, no problem.
    You can make as many sequences with differents settings as you want.

  • Dynamically calling sequences with different prototypes

    Hi,
    Is there a way of dynamically calling from one sequence call, two sequences with different prototypes?
    Thanks,
    krs

    I know that this is not really an answer to your question, but could you write some sort of wrapper to the different sequences that has a common interface and call it?
    Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
    DISTek Integration, Inc. - NI Alliance Member
    mailto:[email protected]

  • Same Sequence# with different applied value in v$archived_log

    Hi everyone,
    I have an issue with one of the dataguard servers here.
    Basically, looking at the v$managed_standby, it is still applying the latest archived log sequence.
    However when I checked for unapplied archived log from v$archived_log, I found at least 1 sequence# which was quite old (around a few days old) not applied.
    my query to check this is:
    SELECT sequence# from v$archived_log where applied = 'NO';result:
    SEQUENCE#
        40154
        40546with a different query I found an interesting result
    select sequence#, recid, stamp, status, applied from v$archived_log where sequence# in (40154, 40546);result:
    SEQUENCE#      RECID      STAMP S APP
        40154       8093  777156019 D NO
        40154       8095  777156053 D YES
        40546       8486  777673729 D NO
        40546       8487  777673734 D YESAt the time I ran this query, the v$managed_standby are as follow:
    select process, status, sequence# from v$managed_standby;result:
    PROCESS   STATUS        SEQUENCE#
    ARCH      CLOSING           40562
    ARCH      CLOSING           40557
    MRP0      APPLYING_LOG      40563
    RFS       IDLE                  0
    RFS       IDLE              40563A simple solution to get those un-applied archived log to be applied is to restart the standby database instance.
    Another finding from the production database:
    select recid, stamp, sequence#, creator, registrar, standby_dest from v$archived_log where sequence# in (40154, 40546);result:
    RECID      STAMP  SEQUENCE# CREATOR REGISTR STA
    45446  777156011      40154 ARCH    ARCH    NO
    45447  777156017      40154 LGWR    LGWR    YES
    45450  777156051      40154 ARCH    ARCH    YES
    46231  777673709      40546 ARCH    ARCH    NO
    46232  777673728      40546 LGWR    LGWR    YES
    46233  777673733      40546 ARCH    ARCH    YESThe question is of course, why is this happening?
    Can this be prevented?
    Thank you,
    Adhika

    CKPT wrote:
    I have an issue with one of the dataguard servers here.
    Basically, looking at the v$managed_standby, it is still applying the latest archived log sequence.
    However when I checked for unapplied archived log from v$archived_log, I found at least 1 sequence# which was quite old (around a few days old) not applied.
    my query to check this is:
    SELECT sequence# from v$archived_log where applied = 'NO';result:
    SEQUENCE#
    40154
    40546
    Even if old archives applied or not, it will keep transfer the archivelogs from primary. Please confirm that you been executed above query in standby.. is it?Yes I ran it from the standby database
    CKPT wrote:
    with a different query I found an interesting result
    select sequence#, recid, stamp, status, applied from v$archived_log where sequence# in (40154, 40546);result:
    SEQUENCE#      RECID      STAMP S APP
    40154       8093  777156019 D NO
    40154       8095  777156053 D YES
    40546       8486  777673729 D NO
    40546       8487  777673734 D YES
    How many remote/standby destinations you have in your DR setup?
    Might this query you have executed in primary, You should always use DEST_ID when executing from primary (or) do check in standby database, Because the applied column you have to check in standby , If you see above the same sequence showing applied in one destination & not applied on other instance, so please do select for dest_2 or in standby.I have only 1 standby destination.
    The query above was executed in the standby database server as well as to show that the same sequence# has different result in the applied column.
    CKPT wrote:
    The question is of course, why is this happening?
    Can this be prevented?What is your Online redo log file size (or) how much average archive log file size?
    This issue happens when Network glitch while transferring archives from primary to standby RFS , So when is big enough in such conditions it will be in status can be WAIT_FOR_LOG.
    BTW, which redo transport you are using? -- recommended to use LGWR
    Is there any network problem?
    check for exact problem either from primary alert log file or from below query,
    SQL> select severity,error_code,message,to_char(timestamp,'DD-MON-YYYY HH24:MI:SS') from v$dataguard_status;
    SQL> select sequence#, to_char(completion_time,'DD-MON-YYYY HH24:MI:SS') from v$archived_log where sequence# in (40154, 40546);
    HTH.The redolog file size is 100MB and so does the archive log file size.
    I'm using LGWR ASYNC
    these are the result of the query which I modified slightly:
    query:
    select severity,error_code,message,to_char(timestamp,'DD-MON-YYYY HH24:MI:SS') from v$dataguard_status where message like '%40154%' or message like '%40546%';result:
    SEVERITY ERROR_CODE MESSAGE                                                                                              TIMESTAMP
    Warning           0 LNS: Standby redo logfile selected for thread 1 sequence 40546 for destination LOG_ARCHIVE_DEST_2    11-MAR-2012 20:28:44
    Warning           0 ARC1: Standby redo logfile selected for thread 1 sequence 40546 for destination LOG_ARCHIVE_DEST_2   11-MAR-2012 20:28:49The message for the 40154 must have been purged.
    It appeared to me that sequence 40546 has been sent twice, by LNS and ARC1.
    query:
    select sequence#, registrar, creator, standby_dest, dest_id, to_char(completion_time,'DD-MON-YYYY HH24:MI:SS') completion_time from v$archived_log where sequence# in (40154, 40546);result:
    SEQUENCE# REGISTR CREATOR STA    DEST_ID COMPLETION_TIME
        40154 ARCH    ARCH    NO           1 05-MAR-2012 20:40:11
        40154 LGWR    LGWR    YES          2 05-MAR-2012 20:40:17
        40154 ARCH    ARCH    YES          2 05-MAR-2012 20:40:51
        40546 ARCH    ARCH    NO           1 11-MAR-2012 20:28:29
        40546 LGWR    LGWR    YES          2 11-MAR-2012 20:28:48
        40546 ARCH    ARCH    YES          2 11-MAR-2012 20:28:53This query proved that the primary database is actually trying to send twice with a different completion time.
    Why does the primary database has to send twice?
    Thanks for replying,
    Adhika

  • How can I import CD's with differing custom settings? IWhen I want to change settings the AAC encoder window does not appear because Itunes has adopted the first custom settings as default.

    I imported a CD with custom settings for stereo bit rate, sample rate and channels. When I tried to import a second CD with different settings I could not get to the AAc encoder window that gave the settings options. The custom settings I had chosen for the first CD had become the default "custom" settings.

    Hi there,
    please take a look at my suggestion under message #19227279
    regards,
    Markus

  • Sequences with different attributes

    I am editing a wedding and decided to brek up each major portion. I now have four sequences. When copied sequence two into seguence one, the footage from sequence two. The canvas size was the same at 50%, however the image size from sequence two ws very small in the canvas. The same happened with my other sequences.
    The purposes of putting joining the sequences was to put the whole project together. What did I do wrong? Am I not supposed to copy and paste from sequence to sequence?
    Please advise.
    The easy setup is set to DV/Panasonic DVCPro

    Lots of moving parts, but never say never. From what you indicate in your last post, at least part of the material is HD.
    You want to do at least two things: get everything into a single editing ceodec (AIC), and conform the clips/sequences  to a common frame rate. Same frame size would be nice, but not as important as the codec and rate.
    I think your best approach would be to choose the format (size and frame rate) that the majority of your movie was shot in and create a new project and an AIC sequence with those settings. Then you could export your four finished sequences, conform as necessary and reimport them into your project as clips. You would finish and export as QT, current settings (AIC) and you'd have a movie file that could be re-purposed for DVD, the Web, projection, mobile, etc.
    If you are able to buy ($49) and learn Compressor, it can do this very well. If you intend to do these sort of projects fairly often, the tool would be worth the investment of $ and time.
    The other way would be to export using Quick Time Conversion.
    Of course, there's always the option of starting all over and re-importing the footage…
    It's been a while since I worked with FCE, amd perhaps someone else will chime in and point out some options that I'm over-looking.
    Good luck.
    Russ

  • CS6 - multicamera sequence with different resolutions?

    Hi,
    I try to edit a multicam sequence with footage of the RED Epic (3840x2160) and a DSLR (1920x1080).
    We shot an interview with two cameras. The final video will be FullHD. So we use the RED footage to generate two shots. A down-scaled and a cropped one.
    Normally I use the RED footage in the non-cropped shot by (sorry my Premiere is German) "scale to framesize". So the 3840x2160 will be autmatically scaled down to 1920x1080.
    When I use the "scale to framesize" to the multicam sequence also the DSLR-Footage will be shrunken.
    So either the RED footage is too big or the DSLR footage is to small for the sequence. And I don´t wanna transcode the RED footage to FullHD cos i want to crop it sometimes, and I don´t yet know when. Is there any help?

    No. The footage is made fine by the operator. But we want to do some crops sometimes to get another shot. 2 cameras -> 3 shots. So i don´t want to scale it down right now. Scaling down would help to cut the 2 cameras without another cropped shot. But the cropped shot is a planned shot. We did that many times, but never with the "comfort" of the use of multicam.

  • How do I create a automatic second page with different layout settings?

    Hi there,
    I want to create a business letter template with a different second page. I already managed to create a different layout on page nr two, but
    whenever I write a letter with this template and I reach the end of page one, pages creates a thrid page in between my page nr one and nr two with a mixture of the layout of template page nr two and the footer of page nr one.
    I want pages to take my template page nr two (with different header and footer) as second page instead of creating one itself.
    If I don't need a second page - because my letter is to short - I should not have to delete a second page. It simply should not be there...
    Thanks for Help!
    G4's and 12" PB   Mac OS X (10.4.6)  

    Hello Stefan,
    you achieve this with a little trick. Create your letter and set the layout for the first and the second page by inserting a placeholder text. This placeholder text should fill the first page and the top of the second page, so both pages are build in one section. When the entire letter is layouted well, select the placeholder text and than save the letter as a template.
    Now every time you open this template, you only have to insert the main text (replace the placeholder text with real content), and the second page disappears until the main text overflows the borders of the first page. Than you will get the second page again with the layout you have created for it.
    I hope this will work for you like it works fine for me.

  • Having Multiple Adobe PDF printers with different output settings

    Hello,
    My company is using Adobe Acrobat X and XI on Win 7 Pro, and we would like to create 2 separate Adobe PDF printers that have 2 different output settings. So I installed a second Adobe PDF printer using the same Adobe Converter Driver as was used to install the first one. Then, I went into Devices and Printers and I edited the printing preferences of one Adobe PDF printer, but what I found was when I changed the preferences of one printer, it automatically changes the other one as well. Is there a way around this?

    Thanks for pointing me to the iTunes Folder Watch program. It looks like this will solve my immediate needs. It's a little clunky in spots, but does handle adding new files very well. And it only cost about $10 to get the fully functioning version with the automatic monitoring in the background.
    I copied the iTunes library files to each account, setup a watch folder that points to the location of the iTunes library content and all the music syncs up perfectly without duplicates. I have yet to test the applications, but music, movies, TV Shows, audiobooks, and podcasts all work fine.
    If anyone else is considering this product, just make sure you double check your file location in the iTune settings to make sure each account is pointing to the same location and is organizing the content in the same way or else the individual account libraries will fight against each other to organize all the content where it is configured to put it. Copying the library files isn't enough since some of these settings are in the Windows Registry.
    I made this mistake at first. I had all the accounts pointing to the same folder, but one of them (the original) had the "Upgrade to iTunes Media Organization" turned on which categorizes all content into folders based on type such as music, movies, podcasts, etc. Since the others were organizing just based on artist and album this caused the accounts to try to reorganize the files when Folder Watcher would tell it there were new files to manage.
    All in all, this solves most of my concerns, but I'm still surprised Apple hasen't added this natively into the iTunes product. Especially when this guy figured out how to write the software to do it and is only charging about 10 bucks to do it. Well I hope this guy makes a million bucks off his little product bacause he surely deserves it!

  • Multiple profiles with different cache settings

    I want to have multiple profiles with different settings for the cache. I'll call them ProfileOne and ProfileTwo for simplicity's sake. ProfileOne I want to clear its cache on exiting Firefox and on ProfileTwo have it retain its own cache. I have already setup both profiles and configured them accordingly with ProfileOne's privacy settings for Clear History > Cache checked so it clears on exit and ProfileTwo is not set to clear anything on exiting.
    The main issue is that after doing something with ProfileTwo then switching to ProfileOne, upon exiting ProfileOne it also deletes ProfileTwo's cache. I have tried using the profile manager to create the profile in a different location than default to no avail. Is there any way to set it so ProfileOne's cache can still be cleared on exit without affecting ProfileTwo's cache?

    After checking a few different options, it looks like the add-on Better Privacy provides the options I need for LSO management and does separate HTML cookies from Flash cookies nicely and lets me save specific site's LSOs. Thanks for the assistance!

  • Kde/dolphin and thunar - different encoding settings?

    Hi,
    I'm using unison to keep my files synchronized between the different machines I'm working at.
    On all I use thunar except for one on that I'm running kde.
    What I've noticed it that thunar and kde seem to use a different encoding when mounting an usb flashdrive because unison wants to sync files that weren't changed because of umlauts. So for unison they seem to be different because of their name.
    Where's the place to look at for setting up the same encoding  (I assume utf8?) for all systems/DEs?
    Thanks!
    Last edited by Barghest (2010-07-24 08:06:35)

    Yes, it's a FAT filesystem (need it for file exchange with other OS).
    So, one of the bot filmanagers is using utf8 by default? I don't know which one because I see the umlauts with both, only unison says the files are differently named.
    Where can I put the utf8 option in dolphin/thunar? I don't want to use a fstab entry for flash drives.
    As you can see, flash drives aren't my best friends ;b Tried udev rules several time but with no success.

  • Auto-pay separate lines on same account with different payment methods?

    if i have an account with two separate lines on it (for example, one for me and one for my gf), how can i set up auto pay by line?  in other words, have auto pay on one line with my cc, and auto pay on her line with her cc?
    i've been poking around in my verizon, but it seems i can only do auto-pay for the entire account...and i created a second userid for the second line, but it only lets me do "pay bill" not set up auto pay...

    I don't think what your describing is possible with Verizon's system.  Since the account owner is the only one responsible for payment, they haven't designed tools for the other users on the account to make payments in the same way.
    Maybe you can set something up through your bank?  Have your girlfriend's bank/CC automatically send a payment for her share of the bill to Verizon shortly after the bill is generated, then set up your auto-pay for the remainder a few days later.  That gives you some time to make sure everything has processed and credited correctly before the bill is actually due.  Once you know it works, you can adjust the dates.

  • Noob needs help with Media Encoder Settings

    Hi All,
    Please be gentle with me. I am very new to this.
    I am using PPCS4 full version on which I am trying to edit and export video from my Canon HF 10 using their AVCHD format.
    The Mac is a MAC PRO 2 x QuadCore 3.0Ghz, 1 x 320GB SATA and 3 x 1TB SATA disks with a 30" Apple Cinema Display.
    I can import and see the video running in the source window, it can be a bit choppy but i am putting dowm to the lack of RAM (more the way). My real problem is that when I export the files the result is, well bad. I either get what appears to be a line effect every other line on the screen or by using other settings it appears grainy.
    My Cam should be recording in 1080i HD and i expect to be able to put this stuff on a DVD / Blue-Ray disk or file and see as good an image as I see in the viewfinder. This I cannot seem to do.
    Any ideas?
    Thanks
    J

    Hi
    I don't understand...please let me know...
    did media encoder work before and it just suddenly stopped working ?  Or  is this the first time you tried using it and it just doesnt work from  your original installation ?  In other words , did it EVER work for you using the HD ?
    What source material are you using ? In other words, what type of video.  MOV and AVI can have many different types of video inside those file extensions...they are called "wrappers" insomuch as they can have a lot of different "codecs" being used in the video.  Can you tell us what the video is that you're using when AME fails to work ?
    Also tell more about your computer setup...how many hard drives? Did you set up your system like recommended in many threads here in the forums ?
    There are a lot of really good and smart people here who can help you, but they need as much information as possible so they can begin to understand what is going on with your problem. It does take some time and work on your part to put all that info into a message, but it's worth it because most times problems are solved because of it.
    ps...not meant to be a criticism because you were angry about problem, but some people probably didnt respond to your trouble right away because of your initial mssg being a little bit scary..  most people here are just users like you and help each other. nobody wants to risk being yelled at or deal with someone who is just angry and isn't really supplying enough information to help solve the problem.  That's just my opinion, and I'm glad your response to my mssg was less angry sounding.  Whew !

  • How to deploy Office 2010 with different OCT settings ?

    Let say my company has 2 departments.
    One department needs all the Office features, while another department needs only Excel and Word.
    Can I place 2 different OCT msp files inside the Updates folder, and install the Office for different department by using the specific OCT msp files ?
    Also, need 2 different config.xml file too (inside folder ProPlus.WW)

    Hi,
    We can use
    Microsoft Exchange Server Deployment Assistant to generates a custom step-by-step checklist that will help you deploy different versions of Exchange Server for different types of scenarios.
    More details about Understanding Hybrid Deployments with Exchange 2010, for your reference:
    https://technet.microsoft.com/en-us/library/hh563847(v=exchg.141).aspx
    Thanks
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Allen Wang
    TechNet Community Support

Maybe you are looking for