Separate settings for MBP keyboard and aluminium keyboard?

I just bought myself a Apple aluminium keyboard (USB) and have to say I'm loving it. However, there is one small hang-up.
Basically, whatever key-commands I apply to the keyboard are taking from my MacBook Pro's keyboard settings and seem to have none of their own. I had gotten the impression that there was a stand-alone software to manage the keyboard but that does not seem to be the case as far as I can tell after about 30 minutes of searching the net and Apple's website.
Does anyone know a way in which I can have one set of settings for my laptop's keyboard and another set for my aluminium keyboard?
All relevant software updates, OS X 10.5.2.

MBP keyboard mapping in Windows http://support.apple.com/kb/HT1220
Usage of Microsofts Keyboard Layout Creator http://support.apple.com/kb/HT2587
Multi Trackpad support in Windows http://support.apple.com/kb/HT4273
Some gestures are simply not supported in Windows.
Stefan

Similar Messages

I have everything set for Arabic fonts and the keyboard as well. When I type in WORD or EXCEL I just get individual Arabic letters, but they never connect, they should be for example like this الس but they always appear like that ا ل س

I have everything set for Arabic fonts and the keyboard as well. When I type in WORD or EXCEL I just get individual Arabic letters, but they never connect, they should be for example like this الس but they always appear like that ا ل س

MS Word for Mac has never supported Arabic. You have to use other apps. Mellel is best, but Pages 5, TextEdit, Nisus Writer, or Open/LibreOffice should work OK.
Sometimes you can make Word for Mac do connected Arabic if you are editing a document created with Windows Word.

My Macbook Pro keyboard AND USB keyboard will not work. However, the trackpad and USB mouse will work. Any help?

My Macbook Pro keyboard and USB keyboard will not work. However, the trackpad and USB mouse will work. Any help?
This is quite frustrating, since it randomly occured as I was browsing the web. It seemed to happen out of nowhere. I cannot login to my user account because I cannot type my password.
Any help will be appreciated.
-Matt

If you have another Mac, boot the non-working one into Target Disk Mode (holding down "T" at startup). Hook up the two Macs via a Firewire cable. The non-working one will mount on the other Mac as an external Firewire HD.
Next, download the 10.5.6 Combo update from here:
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1056comboupdate .html
Run it. When it asks you for a destination, choose the other Mac that was mounted via Firewire. When it's done, unmount the computer and restart it. The keyboard and mouse should work now.

Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

Hello All...
Back after a brief absence, things look a little bit different.
I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
Thanks!
PowerMac G5 1.8 Dual Mac OS X (10.4.3)
Message was edited by: Dan Foley

Thank you for the replies. Everyone was correct about the jack, interface, and phasing problems. I have been unplugging my motu audio interface and then using headphones at work. I have not changed any detailed audio output settings in logic. When I read that the jack might be a problem I tried switching headphones. This actually helped. I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems. I can use these headphones with other devices but not the mac. I have to use ipod ear buds and the phasing seems fixed. Hopefully this information is helpful to someone else.
If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio.

In SAP BW landscape we should have separate servers for DEV, QA and PROD

Hi all,
In SAP BW system landscape we should have separate servers for DEV, QA and PROD.
whether one server is enough for DEV and we can use virtual servers to QA & PROD?
Regards,
chandu

Hi chandu,
In my previous Organisation we got exactly the same landscape for BW as you described.BCS(BAYER COPSCIENCE LTD) operates a BW System Landscape with one centralized Global Development System and three regional Quality Assurance and Production Systems located in Europe, Asia Pacific and Americas. This Landscape is to ensure consistent data models to be available in all regional systems as well as to minimize development efforts and make use of respective synergies.
This is perfectly working for BCS ,and I think, this is the most approriate way of handling of resources.
Regards
CSM Reddy

After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?

After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?Problr

Dear All
i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
Exception Tyle: EXC_CRASH (SIGABRT)
Exception code: 0x00000000, 0x00000000
Chrashed Thread: 6
in thread 6: name: Dispatch queue:
com.apple.addressBookUI.ContactsSettingPlugin
and thaan a lot of data.
Have you any idea?
thank in advance
Fabio

Strange info in "Bypass Proxy Settings for These Hosts and Domains"

For my Mac Mini my Network IP Address always has a self-assigned 169.254 number that I cannot change. Strangely, this same IP number is similar to info that is in the Proxies section (of Network Settings) under "Bypass Proxy Settings for These Hosts and Domains".
No matter what I do, this info (*,local, 169.254/16) appears in my Network Settings in the Proxies section under "Bypass Proxy Settings for These Hosts and Domains". (I tried removing the info and it would cause the "Configure Proxies" selection to default to "Always Use PAC File". Had to go back and retrash all the plist files to have Proxies go back to "Configure Proxies-Manually". Still, the info (*,local, 169.254/16) continues to appear in the "Bypass Proxy Settings for These Hosts and Domains" section and my IP address is always a 169.254 number.)
Comcast cable modem via direct hardwired Ethernet works fine with my other computer, so not the modem. Also, other computer does not have any info in the "Bypass Proxy Settings for These Hosts and Domains" section.
Installed a fresh copy of OS X 11.5 on a new hard drive. Still the same problem.
I posted this issue before but only got one responder and the problem still exists. Any clues? Somebody must know about this stuff. Help please.
Thanks

When your Mac wakes up, it does not yet have an IP Addresss. It wants to send a request to a Router for an apprpriste IP address to use now. But it needs to have an IP address (like a return address) to receive any messages. So, ... wait for it,
... it (your Mac) makes one up. There are rules that ensure it is a random address, but they always start with 169.254. It is on the same subnet with any low-order 16 bits This is the "self-assigned" range of IP Addresses. This address is only good for talking on a local network segment, for things like asking for a valid IP Address from a DHCP-enabled Router.
In most cases, on most networks, the 169.254 self-assigned IP Address is replaced by a valid Local IP Address such as 192.168.xxx yyy or 10.0.xxx.yyy so quickly that you never even see the 169.254 Address.
If you do see the 169.254 Address, it can be read as "Nobody will talk to me" or "Nobody will give me an IP Address". When you have this IP Address for more than an instant, you should suspect bad cables for Ethernet connections, bad signal strength or interference for wireless, Router configuration problems, or Mac configuration problems.
Mac configuration problems are often solved by using the "Assist Me" button is System Preferences > Network and choosing to set up again.
Another diagnostic is to try using Network Utility and the Ping function, and Ping-ing the address of your Airport base Station, often 192.168.0.1 or 10.0.0.1 or similar. This will tell you if the Router is reachable, or there are cabling/wirelss signal problems.
In this case, proxies are not an issue, and are simply a distraction from the real problems.

"current encoder settings for bit rate and sample rate are invalid" message

I have some files I am working with. Details and what happened:
Had some music files where I was doing some trimming/splitting. Files worked fine in itunes.
Open the files in Quicktime Pro 7 to trim them. Exported to aif.
Opened the files with itunes. They open and play just fine.
In Itunes I click"create AAC version" to convert them.
I receive the message "An error occurred while trying to import the file. The current encoder settings for bit rate and sample rate are not valid for this file."
I don't know what to do from here. Suggestions?
Thanks.

Make sure that the AIFFs that you export are set for 16 bit PCM.
Also, assuming that you are using 44.1 kHZ sampling in your AIFFs, make sure that you are not trying to use 48 kHz in the AAC.

Making system settings for measurement documents and measuring point

What is the significance of making system settings for measurement documents and measuring point in spro?
Edited by: Pallavi Kakoti on Jul 14, 2011 1:23 PM

Hi,
<< Moderator message - Cut and paste response from http://www.consolut.com/en/s/sap-ides-access/d/s/doc/YY-OLI0IMRCCUST removed. Plagiarism is not allowed in SCN >>
Regrds
Jitender
Edited by: Rob Burbank on Jun 6, 2011 10:53 AM

Why do we have separate apps for phone, messages, and contacts?

I'm trying to reduce the number of apps that I need to run, and this one just boggles my mind.
Why do we have separate apps for phone, messages, and contacts?
The messages is to tightly coupled to the phone, that it doesn't make any sense for them to be separate.
The contacts app is nothing more then looking at the contacts from the phone app.
What's the story here?
Does it have something to do with the contacts also being part of email app?
Actually, that's my other biff... why are they entangled as such?
Phone contacts should have phone#, email contacts should have email addresses.
If you want a contact to have both phone# and email address, then the two apps (phone/email) should be combined.

The contacts app is nothing more then looking at the contacts from the phone app.
What's the story here?"
The forums would be full of people complaining that you had to go through an additional step ( opening the phone app) to get to contacts. I use the contacts app from the home screen far more often then I use it in relation to calling someone.
I like the way it is far more than the way you propose.
You can leave feedback for Apple at:
http://www.apple.com/feedback

Create Separate Views for New,Edit and Display forms in Infopath

Hi,
I need to create a separate views for New, Edit and Display forms in infopath.
For ex : I need a Submit Button on Display form and not in New/Edit forms.
I tried, but i amnot able to get the changes.
Regards, Shreyas R S

I just validated my approach in a 2013 farm, this is precisely how it's done!
Step 1) List > Display Form
Step 2) Change the View within the Web Part Properties. In your screenshot it looks like you simply went to View Item on the single item, which is not the direction I gave =P.
**Assuming you've already created the multiple views within InfoPath, this allows you to set them up as distinct defaults for New, Edit and Display, let's make that clear. If you are not even to the point of having separate views, that is just in InfoPath,
Page Design tab, far left, New View button

Size settings for swing components and resizing of a JFrame

Hi all!
I'd have the following question:
There is a JFrame, which content panel has the GridBagLayout. In some places on that layout's grid there are JScrollPanels (let's name each as "inner panel") with JTables in the view ports.
When user resizes the main JFrame, I'd like that all inner panels and corresponding tables would resize synchronously: if user enlarges the main JFrame, then the sizes of all those components should increase proportionally, when user makes the main JFrame smaller, then all the sizes should become proportionally less.
I am confused with the settings for max, min and preffered sizes for inner panels as well as for their JTables. I have read about those size attributes and tried to play with them, but I can't obtain the needed result :-/
Each inner panel has the "BOTH" value for the fill attribute in the GridBagLayout's constraints.
Might someone help me?
Thanks in advance!

Hmm...
The JPanel that contains all stuff is the JFrame's content pane...
The entire JFrame's content pane contains another panels (JScrollPanels), which are all set to fill all available space on the parent panel (JFrame's content pane) with "both" value of the "fill" attribute.
Should I put the only one JPanel on the JFrame's content pane and all other stuff at that additional JPanel...?

TS1717 when trying to import cd the following message appears "the current encoder settings for bit rate and sample rate are not valid for this file"?

Trying to import cd when this message appears "the current encoder settings for bit rate and sample rate are not valid for this file". Any suggestions?

Thanks so very much. I chose MP3 and Download and it is working beautifully. Have a wonderful day and it is so nice of you to get right back to me. I'm trying to cut a DVD for my grandson's grad party and I got most of the photos and didn't have any music since I lost everything in a clean install. Could hug you!

Settings for Item Proposal and Product Proposal

Hi Gurus,
How to do the configuration settings for Item Proposal and Product Proposal.
I also want to know what is the difference between Item Proposal and product Proposal.
Give me your Solution.

Item proposal is the list of regularly/frequently ordered items of a particular customer. this will be useful when u are entering the sales order. it will be used to speed up the order entry process.
For that Goto VA51, enter item proposal type as MS and sales area details.
enter the customer name and the list of products and save. Assign the item proposal No in the customer master sales area data, sales tab.
create the sales order and enter the customer no and press the propose items button in the sales order.
the system will propose one box and it will display all the materials. then u can continue further.
Product proposal:
To configure product proposal, Go to IMG,SD, Basic functions, Dynamic product proposal, Maintain all the settings
**A product proposal is a list of products for a specific customer that is automatically proposed during sales document processing. You can decide for yourself which materials should be displayed as product proposals in the sales document. You can also determine the sequence in which the materials appear in the product proposal.
During sales document processing, the system displays a product proposal in the item overview according to the customer and the business transaction. It displays the material number, material description, and historical order quantites in the sales unit last used. To use a material again, you just have to copy it. The system does not run the standard checks (pricing, availability, incompletion, material determination, free goods determination and so on) until you have entered the order quantities.
The product proposal is both an entry help and an aid to sales support and promotions. It is particularly useful in Telesales, where the employee automatically receives a display of all the materials that are of interest to a particular customer. This helps them to provide appropriate advice to the customer quickly and easily. The sales document history enables you to analyse the purchasing behaviour of a customer and recognize early on if it changes, for instance, when the customer suddenly stops ordering a product.
The product proposal differs to cross-selling in that it is dependent on the customer and sales area, and is displayed in the sales document as soon as you have entered a customer. Cross-selling, on the other hand, is triggered by a material. In other words, the system proposes cross-selling materials according to the material or a characteristic of the material you have entered.
You can determine the product proposal from different data sources:
Order history
Listed materials
Excluded materials
Item proposal
Customer-material info records
Customer-specific data sources
You can combine materials from these data sources to create a product proposal. The system then accesses the data sources either online or in the background.
To define a product proposal for sales document processing, you must carry out the following activities in Customizing:
Define customer procedure for product proposal
Define document procedure for product proposal
Assign document procedure for product proposal to order types
Maintain table of origin for product proposal
Define product proposal procedure and determine access sequences
Maintain procedure determination (in background) for product proposal
Maintain procedure determination (online) for product proposal
The product proposal procedure determines how the system displays the product proposal in the sales document. For instance, if the system has accessed the order history, it determines how many columns should be displayed in the sales document, in which period intervals thehistoric order quantities should be displayed (for instance, day, week, or month), and most importantly, the sequence in which the system should access the data sources (for example, order history, listing, exclusion).
The product proposal procedure depends on the:
Customer determination procedure
The customer procedure determines which product proposal procedure the system automatically uses when you create a sales document for a particular customer.
It is specified in the customer master record per sales area.
Document determination procedure
The document procedure determines which product proposal procedure the system automatically uses for a certain document type. The document procedure is stored as a key in the header for the sales document type.
If you use online processing, the product proposal procedure is determined according to the customer and document determination procedures.
If you use background processing, the product proposal procedure is determined according to the sales area in the customer master and the customer determination procedure. It does not use the document determination procedure because the document type is not recognized in background processing.
Difference:
Item proposal is the list of products the customer used to buy frequently.
Product proposal is also the list of products but it will explode in the sales order, once u enter the sold to party field. But this will be based on the following criterias.
Order history
Listed materials
Excluded materials
Item proposal
Customer-material info records
Customer-specific data sources
Hope this clarifies.
Reward points if useful

Settings for non-modvatable and modvatable taxes in img

HI gurus,
What are the settings for non-modvatable and modvatable taxes in img, and where shall we do them
Ur reply is appreciable
Pls send the ans asap
Thanks in adv
sri

Greetings Martin,
The default value for Maximum Time in Queue is 259200 sec OR 3 days. We'd recommend increasing this threshold to 345,600 seconds (four days) or 432,000 (five days) if necessary.
Please remember changing this value will not affect existing queued messages. The drop dead point in time is attached once and resides with the message for it's life.
Regards,
Viquar Ahmed
Customer Support Engineer

Separate settings for MBP keyboard and aluminium keyboard?

Similar Messages

Maybe you are looking for