Separating albums that have the same name by the same artist?

I have two albums by the group The Small Faces and both are entitled "Small Faces." One came out in 1966 and the next in 1967. They are different albums, just on different labels which may be why they used the same name twice. Anyway, i can't figure out how to separate them in my iTunes without intentionally mis-labeling one of the albums. Even by doing "Small Faces" and "The Small Faces" the two albums just form together as one and i can't figure out how to keep them both seperate while maintaining the correct album titles.

You can't.
You could add the label to the album name.
Small Faces (Immediate Records)
Small Faces (Decca)

Similar Messages

How do I recombine tracks from one album that have been split up in the iCloud

I have a number of soundtrack albums where each track is atributed to a different artist. When they go into iCloud they sort as multiple "albums", one for each artist. They show the same album name but each track is mixed amoung my other albums alphabetically by the artist. Is there any way I can get them all to show together under the one album title?

It's kind of tedious, but go into the "Info" for each song and check the "Compilation" box, one by one. Go back to your album list and they will be listed all together.

What is the registry key in Adobe Acrobat v9 which turns the dialog off: any form fields that have the same name in the merged documents are now...

what is the registry key in Adobe Acrobat v9 which turns the dialog off: any form fields that have the same name in the merged documents are now...

There is no key because that is an important dialog. Why would you want it to go away?

I have some loops from acid 5 which I have dragged in a folder to the loop browser. Some of them retain the folder name in the View: and some don't. I have had some that seem to go in but I can't find them. Where should I look?

I have some loops from acid 5 which I have dragged in a folder to the loop browser. Some of them retain the folder name in the View: and some don't. I have also had some that seem to go in but I can't find them. If I try to add them again, I get a msg that they are already there. Where should I look?

It may be best to recreate the folder and the smart playlists from scratch.
tt2

I subscribed to iTunes Match and would like to sync my music on multiples devices that have different Apple IDs within the same iCloud family.

I subscribed to iTunes Match and would like to sync my music on multiples devices that have different Apple IDs within the same iCloud family.
Can someone indicate the way to proceed?
Thanks.

Hi,
You can't use family sharing or multiple Apple IDs with iTunes match.
ITunes match is only attached to Apple id that you used to subscribe.
Jim

Getting a 404 message for pages that the menus that have a french accent in the menu name, other pages display fine.

Hello, Using muse June 2014 release. After uploading all files to Godaddy web hosting, all menu that have a french accent in the menu name are giving a 404 message page not found, whereas all my other pages that do not have french accents are displaying normally. For the time being, I have removed accents in 3 of the menus, but would prefer to show them. In earlier version of muse everything was working fine. I've also been getting this message: "MuseJSAssert: Error calling selector function:TypeError: $(...).toBrowserWidth is not a function" ; the header of the page shifts to the left of the screen whereas the body items stay centered.
I've deleted everything on the web hosting ftp site and re uploaded everything but does not fix the problem.
Thank you Dorene.

I uploaded it within Muse "Upload to FTP hose".
However, this morning when I was getting the error message "MuseJSAssert: Error calling selector function:TypeError: $(...).toBrowserWidth is not a function" ; my header was shifting left on some pages and not all and at this time I was not getting the 404 error yet. So I deleted everything from the root of the Godaddy web host and re uploaded and thats when it started giving me the error messages of page not found only on the pages with french accents in the menus. Could I have deleted something in the root that should stay there, but I'm thinking if it should not be deleted it would be locked. Thank you Zak for keeping with and and helping me find this problem. I'm helping out some friends with the new campground they purchased and I look pretty bad with these pages not showing up.

So I have been using my iPad for a few months now and I recently noticed that the time display next to the playlist name in the music app that is supposed to display the total song count and time of a playlist is way off. I have a 25 song playlist that 2

So I have been using my iPad for a few months now and I recently noticed that the time display next to the playlist name in the music app that is supposed to display the total song count and time of a playlist is way off. I have a 25 song playlist that is around 2 hours on my computer appears as 2003 minutes on my iPad. It's a smart playlist limited to 25 songs if that makes any difference. Is this happening to anyone else? Any help would be appreciated!

Greetings,
First make an iCal backup, File > Export > Archive.
Remove the following to the trash and restart your computer:
Home > Library > Caches
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
__NOTE: Removing these files will remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
Once the computer is back up and running open iCal and test.
Hope that helps.

How to sincronize with itunes an 3G iphone that has the same name as the new 4S

I've just boght a new 4s iphone to substitute my old 3G so when asked by itunes I didn't change the name of the new iphone. Now I have two I phones with the same name and the old one is not able to sinchronize with I tunes any more. It's not even able to restore it self so I could change its name to use it under a different Iphone, does any one have any idea of what can I do to reutlize it,. I'd much appreciate your advise, thank you,
León Nik

It's easy to rename each unit. When you connect your iPad and it syncs, the unit will appear on the left of the iTUnes screens just click on the unit there and you can rename it. You should do this immediately so you can see which unit was backed up by it's name. You can sync as many decices as you want in one iTunes library and you can even share Apps as long as you're going to sync both from teh same iTunes account. My household has 2 iPad 2s and we share our apps, and we also share downloaded books, magazines, music, etc.......

I have a keynote presentation that i built a while ago. How do identify the file names of the video files that are in the presentation?

I have a keynote presentation that i built a while ago. How do i now identify the file names of the video files that are in the presentation?

With your presentation open, click on each movie element and read the name in the Metrics Inspector > File Info.

After upgrading my 3gs to ios5, I get 2 copies of pictures synced from my computer, 1 in the Photo Library and another in a library with the same name as the folder I put the pictures in to put on the phone. Any ideas why?

When syncing pictures from my computer to my I-Phone I get 2 copies of the pictures, 1 in the Photo Library and another in a library with the same name as the folder I put pictures in to put on the phone. This started after I upgraded to ios5. I have tried re-installing I-Tunes. I have not reset the phone. My main concern is the amount of memory pictures take up on the phone. It's not a problem now but could be in the future. Any Ideas on why this happening?

It has always been this way. it was never different. This is how the iphone handles photos - always has.
There are NOT two copies, There are simply two ways to access the very same photos. All synced photos will ALWAYS be under Photo Library ( you can look at all photos at once this way or do a slideshow of all photos). Those very same photos can also be accessed from the individual folders so you can show or slideshow just that folder.
Just as a book can be in the library and in the fiction section, there is only one book/photo.

Picture Library : upload image with same name overwrite the image in thumbmail or WebVersion view but not the actual image link points to the old image

Hello,
I am facing a wired issue with Picture Libraries in SharePoint.
We created a custom field and added it to UserInfo list, the column based on custom field lets user upload their personal images to a Picture Library with the name <User ID>.<Image Extension> e.g. 1.jpg where UserID is internal Listitem ID of the UserInfo list and set its URL to the field value which we use to display the image on our custom user profile and some other WebParts.
If the user uploads a different image, it will overwrite the existing one it keeping the same name.
The field worked perfectly with sites using widows Based authentication, but as we move the field to sites with form based authentication we find that the field is able to upload the image properly first time but on each successive upload, although a new image gets uploaded with the name userid.imagextension and is shown in the allitems.aspx page in the thumbnail view and in the picture preview on the dispform.aspx page, but the link next to the name field and the image shown on clicking the preview points to the old image.
To put it other way
https://<Web URL>/Picture%20Library/_w/Upload_jpg.jpg
https://<Web Url>/Picture%20Library/_t/Upload_jpg.jpg
Would show the updated image
but the actual URL
https://<Web Url>/Picture%20Library/Upload.jpg
points to the old image
what’s even more strange is that even after deleting the image the url still shows the old image at
https://<Web Url>/Picture%20Library/Upload.jpg
I confirmed the same by actually repeating the same exercise on a picture Library in the User Interface
Uploading an image say upload.jpeg in the picture library using SharePoint interface.
Then uploading a different jpeg image keeping the same name upload.jpeg again in the picture library.
In allitems.aspx thumbnail view and on dispform.aspx page preview filed image now show the newly uploaded image but when you click the preview image or click the link in the name field value it takes you back to the old image.
I have seen this issue on environment where we have enabled form based authentication and the issue is not seen on another server where we have wss with windows based authentication.
Has anyone noticed such behavior and is there any workaround to that!
Thanks & Regards
Saurabh Rustagi

All,
I had the same issue.
In my case, Blob Cache was enabled for the web application in which the image issue was occuring.
I cleared blob cache, and after doing a hard refresh of my browser, the correct image was then displayed.
To clear blob cache, do the following:
Navigate to:
http://yourwebapp:port/yoursite/_layouts/objectcachesettings.aspx
Select: "Object Cache Flush" and "Force all servers in the farm to flush their object cache" check boxes
Click the OK button
Hope this helps.

How to hide the file name (the bizarre number assigned by the camera) when exporting an image version in aperture from an album. Pl understand I want to keep the file name in the project library version.

how to hide the file name (the bizarre number assigned by the camera) when exporting an image version in aperture from an album. Pl understand I want to keep the file name in the project library version.

Within Aperture you have Images, which are constructed on-the-fly from two files (the Master and the Version). You get an image-format file _only_ when you export an Image. You select the file name (usually a scheme) when you create an image-format file (that is, when you export). Look under "Aperture→Presets→File Naming" for built-in Presets. You can, of course, create your own or customize any provided.
The Preset is applied to only the file newly created by your "export" command. It is not applied to the Image in Aperture (unless you rename your Versions or your Masters).

The wrong name of the message sender appears. The phone also does not notify the receiver. This started after we purchased in iPad and attempted sending that phone an iMessage.

When sending messages to one of our iPhones, the wrong name of the sender appears. The phone also does not notify the receiver. This started after we purchased in iPad and attempted sending that phone an iMessage.

Hi buddy, I figured out what is wrong with that. I had the very same issue, while sending an sms via iMessage on Mountain Lion. I called the Apple guy at the Apple care support but without any luck.
At the end--at least in my case, but it could also be yours--I think I have understood what was going on. This happens when you have your Apple ID registered on more than one device. In my case, we have two iPhones--one for me and one for my wife--but with the same App Store account. So, when I sent an sms via iMessage for the Mac, the receiver was shown my wife's iPhone number.
I hope I have been clear enough, you know, explaining this in a foreing language is always painful...
Ciao,
Antonio
P.S.: this could be true for similar issues (iMessage wrong sender) that I've read in the Mountain Lion, iPad and iPod forums.

Unknown Host Unable to locate the server requested --- the server does not have a DNS entry. Perhaps there is a misspelling in the server name, or the server no

Hello,
Today i tried accessing transitbux.com with mozilla, but i'm getting this kind of a error as mentioned below:
Unknown Host
Description: Unable to locate the server requested --- the server does not have a DNS entry. Perhaps there is a misspelling in the server name, or the server no longer exists. Double-check the name and try again.
Can anyone help me please, and the same website is accessible with my phone.
Help me please. :(
Regards
-

Try http://www.transitbux.com/
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"

A cmr-field and a cmp-field on the bean are using the same name. The names

Hi:
I am using weblogic 8.1 and MyEclipse 5.1.1. I am deploying my ear application through MyEclipse 5.1.1 as an ear file.
When I ran the following EJB QL:
SELECT OBJECT(p) FROM Product p.category = ?1
I get the following error:
n relation Category-Product, a cmr-field and a cmp-field on the bean are using the same name. The names of cmr and cmp fields must be unique.
It is basically complaining that I have a field
<cmr-field>
                         <cmr-field-name>category</cmr-field-name>
                    </cmr-field>
in my ejb-jar.xml and also the same category in the
<cmp-field><field-name>category</field-name></cmp-field>
field. The problem is that if I changed the value of the cmr-field, I have to add a get and set in my productLocal.java and when you do that you have to do the same in the ejb-jar.xml.
Here is my ejb-jar.xml:
<?xml version="1.0"?>
<!DOCTYPE ejb-jar PUBLIC
"-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN"
"http://java.sun.com/dtd/ejb-jar_2_0.dtd">
<ejb-jar>
<enterprise-beans>
<entity>
<ejb-name>CategoryEJB</ejb-name>
<local-home>com.CategoryHomeLocal</local-home>
<local>com.CategoryLocal</local>
<ejb-class>com.CategoryBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.Integer</prim-key-class>
<reentrant>False</reentrant>
<cmp-version>2.x</cmp-version>
<abstract-schema-name>Category</abstract-schema-name>
     <cmp-field><field-name>categoryId</field-name></cmp-field>
<cmp-field><field-name>categoryName</field-name></cmp-field>
<cmp-field><field-name>picture</field-name></cmp-field>
<cmp-field><field-name>pictureWidth</field-name></cmp-field>
<cmp-field><field-name>pictureHeight</field-name></cmp-field>
<cmp-field><field-name>labelOn</field-name></cmp-field>
     <cmp-field><field-name>labelOff</field-name></cmp-field>
     <cmp-field><field-name>button</field-name></cmp-field>
<primkey-field>categoryId</primkey-field>
<security-identity><use-caller-identity/></security-identity>
          <query>
               <query-method>
                    <method-name>findCategory</method-name>
                    <method-params></method-params>
               </query-method>
               <ejb-ql>
                    SELECT OBJECT(c) FROM Category c
               </ejb-ql>
          </query>
     </entity>
     <entity>
<ejb-name>ProductEJB</ejb-name>
<local-home>com.ProductHomeLocal</local-home>
<local>com.ProductLocal</local>
<ejb-class>com.ProductBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.Integer</prim-key-class>
<reentrant>False</reentrant>
<cmp-version>2.x</cmp-version>
<abstract-schema-name>Product</abstract-schema-name>
     <cmp-field><field-name>productId</field-name></cmp-field>
<cmp-field><field-name>brandName</field-name></cmp-field>
<cmp-field><field-name>productDescription</field-name></cmp-field>
<cmp-field><field-name>purchasePrice</field-name></cmp-field>
<cmp-field><field-name>category</field-name></cmp-field>
<primkey-field>productId</primkey-field>
<security-identity><use-caller-identity/></security-identity>
          <query>
               <query-method>
                    <method-name>findProduct</method-name>
                    <method-params>
                    <method-param>com.CategoryLocal</method-param>
                    </method-params>
               </query-method>
               <ejb-ql>
                    SELECT OBJECT(p) FROM Product p.category = ?1
               </ejb-ql>
          </query>
     </entity>
</enterprise-beans>
<relationships>
               <ejb-relation>
               <ejb-relation-name>Category-Product</ejb-relation-name>
               <ejb-relationship-role>
                    <ejb-relationship-role-name>
                         Category-has-many-Product-numbers
                    </ejb-relationship-role-name>
                    <multiplicity>one</multiplicity>
                    <relationship-role-source>
                         <ejb-name>CategoryEJB</ejb-name>
                    </relationship-role-source>
                    <cmr-field>
                         <cmr-field-name>productNumbers</cmr-field-name>
                         <cmr-field-type>java.util.Collection</cmr-field-type>
                    </cmr-field>
               </ejb-relationship-role>
               <ejb-relationship-role>
                    <ejb-relationship-role-name>
                         Product-belongs-to-Category
                    </ejb-relationship-role-name>
                    <multiplicity>many</multiplicity>
                    <cascade-delete/>
                    <relationship-role-source>
                         <ejb-name>ProductEJB</ejb-name>
                    </relationship-role-source>
                    <cmr-field>
                         <cmr-field-name>category</cmr-field-name>
                    </cmr-field>
               </ejb-relationship-role>
          </ejb-relation>
</relationships>
<assembly-descriptor>
<security-role>
<role-name>Employees</role-name>
</security-role>
<method-permission>
<role-name>Employees</role-name>
<method>
<ejb-name>CategoryEJB</ejb-name>
<method-name>*</method-name>
</method>
</method-permission>
<container-transaction>
<method>
<ejb-name>CategoryEJB</ejb-name>
<method-name>*</method-name>
</method>
<method>
<ejb-name>ProductEJB</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
</assembly-descriptor>
</ejb-jar>
Here is my weblogic-cmp-rdbms-jar.xml:
<!DOCTYPE weblogic-rdbms-jar PUBLIC
'-//BEA Systems, Inc.//DTD WebLogic 8.1.0 EJB RDBMS Persistence//EN'
'http://www.bea.com/servers/wls810/dtd/weblogic-rdbms20-persistence-810.dtd'>
<weblogic-rdbms-jar>
<weblogic-rdbms-bean>
     <ejb-name>CategoryEJB</ejb-name>
<data-source-name>ShoeStore</data-source-name>
     <table-map>
          <table-name>category</table-name>
          <field-map>
          <cmp-field>categoryId</cmp-field>
          <dbms-column>categoryID</dbms-column>
          </field-map>
          <field-map>
          <cmp-field>categoryName</cmp-field>
          <dbms-column>categoryName</dbms-column>
          </field-map>
          <field-map>
          <cmp-field>picture</cmp-field>
          <dbms-column>Picture</dbms-column>
          </field-map>
          <field-map>
          <cmp-field>pictureWidth</cmp-field>
          <dbms-column>PictureWidth</dbms-column>
          </field-map>
          <field-map>
          <cmp-field>pictureHeight</cmp-field>
          <dbms-column>PictureHeight</dbms-column>
          </field-map>
          <field-map>
          <cmp-field>labelOn</cmp-field>
          <dbms-column>LabelOn</dbms-column>
          </field-map>
          <field-map>
          <cmp-field>labelOff</cmp-field>
          <dbms-column>LabelOff</dbms-column>
          </field-map>
          <field-map>
          <cmp-field>button</cmp-field>
          <dbms-column>Button</dbms-column>
          </field-map>
</table-map>
<automatic-key-generation>
<generator-type>SQL_SERVER</generator-type>
</automatic-key-generation>
</weblogic-rdbms-bean>
<weblogic-rdbms-bean>
     <ejb-name>ProductEJB</ejb-name>
<data-source-name>ShoeStore</data-source-name>
     <table-map>
          <table-name>PRODUCT</table-name>
          <field-map>
          <cmp-field>productId</cmp-field>
          <dbms-column>productId</dbms-column>
          </field-map>
          <field-map>
          <cmp-field>brandName</cmp-field>
          <dbms-column>brandName</dbms-column>
          </field-map>
          <field-map>
          <cmp-field>productDescription</cmp-field>
          <dbms-column>productDescription</dbms-column>
          </field-map>
          <field-map>
          <cmp-field>purchasePrice</cmp-field>
          <dbms-column>purchasePrice</dbms-column>
          </field-map>
          <field-map>
          <cmp-field>category</cmp-field>
          <dbms-column>categoryId</dbms-column>
          </field-map>
</table-map>
     
<automatic-key-generation>
<generator-type>SQL_SERVER</generator-type>
</automatic-key-generation>
</weblogic-rdbms-bean>
<weblogic-rdbms-relation>
     <relation-name>Category-Product</relation-name>
<weblogic-relationship-role>
<relationship-role-name>Product-belongs-to-Category</relationship-role-name>
          <relationship-role-map>
<column-map>
<foreign-key-column>categoryId</foreign-key-column>
<key-column>categoryID</key-column>
</column-map>
          </relationship-role-map>
</weblogic-relationship-role>
</weblogic-rdbms-relation>
</weblogic-rdbms-jar>
Here is my productLocal.java:
package com;
import javax.ejb.CreateException;
import javax.naming.NamingException;
import java.util.Date;
import java.util.Vector;
import java.util.Collection;
public interface ProductLocal extends javax.ejb.EJBLocalObject
     public Integer getProductId();
     public void setProductId(Integer productId);
     public String getBrandName();
     public void setBrandName(String brandName);
     public String getProductDescription();
     public void setProductDescription(String productDescription);
     public Double getPurchasePrice();
     public void setPurchasePrice(Double purchasePrice);
public CategoryLocal getCategory();
     public void setCategory(CategoryLocal category);
Here is my ProductBean.java:
package com;
import javax.naming.InitialContext;
import javax.ejb.EntityContext;
import javax.ejb.CreateException;
import javax.naming.NamingException;
import java.util.Date;
import java.util.Collection;
import java.util.Iterator;
import java.util.Vector;
import java.lang.Integer;
public abstract class ProductBean implements javax.ejb.EntityBean
     public Integer ejbCreate(Integer id)
          this.setProductId(id);
          return null;
     public void ejbPostCreate(Integer id)
     //public abstract Integer getCategoryId();
//     public abstract void setCategoryId(Integer categoryId);
     public abstract CategoryLocal getCategory();
     public abstract void setCategory(CategoryLocal category);
     public abstract Integer getProductId();
     public abstract void setProductId(Integer productId);
     public abstract String getBrandName();
     public abstract void setBrandName(String brandName);
     public abstract String getProductDescription();
     public abstract void setProductDescription(String productDescription);
     public abstract Double getPurchasePrice();
     public abstract void setPurchasePrice(Double purchasePrice);
     public void setEntityContext(EntityContext ec)
          System.out.println("ProductBean setEntityContext");
     public void unsetEntityContext()
          System.out.println("ProductBean unsetEntityContext");
     public void ejbLoad()
          System.out.println("ProductBean ejbLoad");
     public void ejbStore()
          System.out.println("ProductBean ejbStore");
     public void ejbActivate()
          System.out.println("ProductBean ejbActivate");
     public void ejbPassivate()
          System.out.println("ProductBean ejbPassivate");
     public void ejbRemove()
          System.out.println("ProductBean ejbRemove");
What do I needed to do to fix this problem.
Any hint or help would be greatly appreciated!!!
Yours,
Frustrated

cmr field which is "category" in ur mapping , u can't use as cmp field in abstract schema mapping. just remove category from cmp field . and every thing is fine

Separating albums that have the same name by the same artist?

Similar Messages

Maybe you are looking for