Separating Audio & Video Podcasts in the Same Feed

Slightly complex question here ... with several possible solutions.
I have a few podcast feeds that combine both audio and video podcasts. I would like to synch only the audio episodes to my iPod.
If I try to synch manually, I have to choose every episode of every feed I want to synch in one go ... I haven't figured out how to add to an existing set of podcasts on my iPod. I don't seem to be able to synch everything then manually delete the videos.
If I synch automatically, I get all the video too, which eats too much disc space.
I've thought of the following possible solutions, though I don't know if they will work.
- subscribe to the a/v feed twice, and delete the video feeds from the feed I synch to the iPod;
- move the videos out of the podcast section to someplace else;
Any help? I'm an old Mac user, and have been using iTunes for a long time, but podcasts and iPods are new to me, so I may be missing something obvious.
Thanks!

bump

Similar Messages

  • Duplicate Podcast Listing with the same feed

    I run the boagworld.com podcast and for ages I have had the problem of my show appearing twice in the listings.
    Essentially the two shows are identical. They even share the same feed. The only difference between the two is a parameter at the end of the podcasts urls...
    http://feeds.feedburner.com/boagworldpodcast
    http://feeds.feedburner.com/boagworldpodcast/?i=2
    Obviously I want to remove the duplicate because it is causing confusion. However, I cannot add the normal block tag because they both share the same feed and that would remove both.
    I have written to Apple and requested that one be removed but have got no response.
    Any ideas?

    It does turn up twice in the Search results but subscribing from either results in it using the same feed, the one without the addition on the end.
    Both URLs open the feed; the only thing I can suggest is that you remove the access to the feed through the longer URL, though as I don't know how you've managed to achieve that I can't advise how. This may eventually remove it from the Search results, though it may take some time. As both instances actually appear to be using the same URL I don't see any other way of dealing with it, since the normal processes will affect both appearances and would remove the show entirely.

  • Multiclips and multiple audio tracks playing at the same time

    I've only just taken delivery of my first ever mac (only ever used PC) with FCP, and I'm loving it already! Done lots of reading and viewing of video etc etc, and it's not as daunting as I thought it might be. I have one question the books don't seem to answer, and I can only find one reference to this on this site, with no definitive response. FCP5 probably doesn't work this way, but just in case someone knows different......
    I film and edit motorsport (karting) programmes for television in the UK, using multiple cameras. I usually lay all the video and audio tracks on the timeline, (synched) lock the audio for each (as it is engine noise, and I want it playing without abrupt changes at cuts as each kart passes each camera, whether in shot or not) then cut the video tracks and delete those video segments not required.
    The most exciting aspect of FCP5 for me is the multiclip editing facility, which I have found very easy to learn and is going to save me hours of work! However, I want to know if there is a way of having each audio track from each camera used in the multiclip laid down on the timeline when you import the multiclip to the timeline from the viewer, in order that I can play each audio track from each of the cameras at the same time.
    I know how to cut from angle to angle, leaving the audio from the selected angle as the one audio track playing, but I want all of the tracks to appear in the timeline and play at the same time. I know there's a bit of a workaround by locking the video and importing each audio track from each clip independently, but if you do have to re-synch one of the multiclips, this means the audio is not then synched with the original clip, which will have had an in point set before being imported in as part of a multiclip.
    I can understand why you might want to keep audio from one camera only playing over the whole multiclip, or to switch between audio from each, but in my case I prefer all audio to play at the same time. The workaround is still do-able for me as I'm only talking about engine notes, which if they are a few frames out is not very noticeable at all, but I would like to know if I'm right in thinking I cannot do it the way I would like to?
    Wish I'd used FCP from the start, but glad I've got it now.....especially with the 30 inch screen! It's 4.40am, been going over 19 hours straight and I'm still making comments like...."WOW, that's brilliant"...every half hour!
    G5   Mac OS X (10.4.3)   Quad, 8gb ram, 2 x G-Media GRaid 500gb Raids, 30 + 20 inch Cinema screens

    ...

  • Can't play video podcasts in the album view box in iTunes 8

    I can't figure out how play video podcasts in the album view box (bottom left hand side) in the new iTunes 8. I could do it before w/7 but I don't remember what option I had checked off.
    Thanks in advance

    Let me know what you find out. I bought the new 80Gb ipod and I am having the same problem on long podcasts. It just reboots.

  • Play two video files at the same time.

    I am trying to play two video files at the same time. I create two threads, each of which has its own frame, playing button, and builds its own graph to play the file. Now everything seems works except that when the first file is being played and I hit PLAY
    to play the second file, the program plays the second file but the first one is paused; furthermore the control button has no response for the first one. Did I miss anything? Can anyone help me figure out the problem?
    Best,
    Fayin

    You don't need separate threads for 2+ playback pipelines because the filters create worker threads internally and don't block execution on calling thread.
    If you decide to keep separate threads, you will have to follow Michel's advice and have message pumps on those threads.
    You can also have both files in the same graph, in which case you have perfect sync between them (both start playing together in sync), however you cannot pause/stop/run files separately.
    The problem you described is most likely not a DirectShow problem and is rather about generic threading, COM or window messaging.
    http://alax.info/blog/tag/directshow

  • I Ipod class wont play TED and other video podcasts.  The genious bar could not figure out the problem.  This problem is not isolated to a single computer.  Secondly, the convert to ipod version feature in Itunes does not resolve the problem.

    My Ipod classic wont play TED, The Grid, Techzilla and other video podcasts (but not all video podcasts).  The genious bar could not figure out the problem. Instead, the Apple store gave me credit towards a new classic, which produced the same problem.  This problem is not isolated to a single computer.  Secondly, the convert to ipod version feature in Itunes does not resolve the problem.  Lastly, I tried restoring the ipod to no avail.  I've heard this is a video codec problem. 

    See this extensive older thread on the issue.
    https://discussions.apple.com/thread/2813428?start=45&tstart=0
    B-rock

  • What is the best way to deal with different audio sample rates on the same timeline ?

    what is the best way to deal with different audio sample rates on the same timeline ?

    You don't have to do anything special. If possible, start your project with a clip that has the desired target frame rate and audio sample rate, and your project parameters will be set automatically. Other sample rates will be converted under the covers.
    For example, if your video is shot at 48khz, you can add music files at 44.1khz with no problem.
    If you are recording audio that you want to synch with video (multicam), you will get best results if everything is 48khz, but you can use 44.1 if that is all you have. Once I forgot to reset my Zoom to 48,000 and it still worked.

  • ITunes and Yahoo MediaRSS (MRSS) in the same feed?

    I note that the iTunes podcast spec and the Yahoo Media RSS (MRSS) feed
    spec use XML namespaces and seem to be compatible. As such is it
    possible to include both specs in the same feed and produce a feed that
    is both an iTunes podcast and a MRSS feed?
    Even if it's is technically possible or allowed by the specs, does
    anyone know of any compatibility issues with any particular consumers
    for this approach? For example, will iTunes consume such a combined
    feed? Miro? Others?
    I'd like to hear anyone's thoughts on this approach, for or against.
    Thanks!
    Ross

    From the post I linked to above...
    Addendum: I don't own an iPhone or iPod Touch to check but I'm told that with the V3.x firmware these now group tracks on the value of Album Artist in a logical fashion.
    It would seem that the logic in respect of Album Artist in the latest iPhone/iPod Touch firmware has been made to correspond with that of iTunes. The same cannot be said of the iPod Classic & earlier models. The issues discussed in that post, which highlight a number of organisational quirks, have been consistent through iTunes 7.x to 9.x and iPod firmware releases and, as far as I'm aware, affect both Mac & PC users. iTunes 9.0 has an issue with the ordering of multi-disc albums but this should not affect the number of albums, artists etc. that are declared.
    tt2

  • Recording Audio and Midi at the same time in Logic 7 Express Can it be done

    I am wondering if I can record audio and midi at the same time in Logic 7 Express. I am running my guitar thrugh a Roland GR 33, and a line out and using the GR 33 to trigger sounds in the Logic's synth section but cant seem to record all three tracks at once. If any one knows how let me know. Oh and I am running the GR Synth and Guitar into the Prosonus Fire Fox and have the GR 33 out midi to the Fire Box as well. So I guss the question is how do I sent up two audo tracks and one midi track to record in real time. Thanks Victor

    I am wondering if I can record audio and midi at the
    same time in Logic 7 Express. I am running my guitar
    thrugh a Roland GR 33, and a line out and using the
    GR 33 to trigger sounds in the Logic's synth section
    but cant seem to record all three tracks at once. If
    any one knows how let me know. Oh and I am running
    the GR Synth and Guitar into the Prosonus Fire Fox
    and have the GR 33 out midi to the Fire Box as well.
    So I guss the question is how do I sent up two audo
    tracks and one midi track to record in real time.
    Thanks Victor
    Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
    HL

  • 2 videos playing in the same page

    Hi All
    I've got a new issue, I have a page with 2 animated graphs (as MP4). It seems that there is a conflict to auto play the both video, because one appear with a skin controler (not asked to) + the video stop before finishing to play.
    I've test by deleting the second video... Then it works....
    How do you manage to have 2 videos in the same page ?? do you have the same problem?
    I want to avoid Jpg Sequences as they are much more heavy

    Apple does not allow playing multiple videos at the same time. they are
    affraid your ipad will crash vecause of it's limited memory
    never tried multiple videos after each other.
    (mobil gesendet)
    Am 27.10.2011 10:23 schrieb "minia92" <[email protected]>:
       Re: 2 videos playing in the same page  created by minia92<http://forums.adobe.com/people/minia92>in
    Digital Publishing Suite - View the full discussion<http://forums.adobe.com/message/3992755#3992755>

  • Can 2 different podcasts have the same name?

    My friends and I have recently created a podcast and posted it to Itunes
    http://itunes.apple.com/us/podcast/the-get-a-life-podcast/id529624848
    After we had posted for a while a member of our group discovered that another podcast had the same name:
    http://itunes.apple.com/gb/podcast/get-a-life-podcast/id398385612
    Is it possible for both podcasts to exist? Will one of us have to change our name? Can they force us to change our name? I'm hoping neither one of us will have to do that. Any and all help in this matter will be greatly appreciated.

    If you mean can they both exist in iTunes, clearly the answer is yes since they are both there now.
    Look at this:  http://www.facebook.com/pages/The-Get-a-Life-Podcast/107052592671571
    If you do a web search on "get a life" podcast you will find even more.
    It could be confusion if someone is looking for your podcast and finds one of the others.  Also, if one of you Get A Lifers gets famous (and I hope it is you), there will be legal action for sure.
    You may want to consider adopting a more unique name.  Just my opinion.

  • Can we have multiple Podcasts with the same Mac Account?

    Hi all,
    Can we have multiple Podcasts with the same Mac Account?
    For example, I have a single .MAC account and create a website with multiple Podcast pages...or within iWeb I create multiple sites, and each has a podcast.
    Is there a problem?
    Thks
    Leo

    Its not possible for the same development object. Only 1 person can access an object at a time and if mutiple users modify an object new TASKs are created under the same TRANSPORT.
    Only after releasing the tr you can create a new tr on the same object.
    Message was edited by:
            Abhishek Jolly

  • Is there a way to create a thumbnail for QuickTime videos on a PC?  All the videos currently have the same QuickTime logo as there thumbnail.

    Is there a way to create a thumbnail for QuickTime videos on a PC?  (Windows XP)  All the the videos currently have the same QuickTime logo as their thumbnail.

    Abdur,
    In the sheet :: table :: cell that is going to receive the data, type an equals sign, then click on the cell that the data will come from and press Return.
    This will require that you navigate to the origin cell by choosing the proper sheet.
    Jerry

  • How do I layer 2 video clips in the same time space/ playing side by side at the same time

    I wish to add 2 views of the same subject side by side and playing at the same time. Is this A possible and B if so how do I add the second video clip into the same time space

    aggro
    What version of Premiere Elements are you using and on what computer operating system is it running?
    This sounds like a split screen effect to me.
    If so, one view on Video 1 and the other directly above that is the other view on Video 2.
    Then crop each so that each occupies 1/2 the Edit area monitor screen.
    (generalized since I do not know your program version, see effects Transform/Crop).
    I wrote the following in 2011 for a Premiere Elements 8 user in another forum
    Your basic tools to achieve your goal are Crop Video Effect and Horizontal Flip Video Effect.
    Video ONE on video track 1.
    Video TWO on video track 2, directly above Video ONE.
    Highlight Video ONE on video track 1, Edit Mode/Effects/Video Effects/Transform/Crop, followed by adjusting the crop under Edit Effects (see bottom of Effects Panel) so that Video ONE occupies the left half of the screen.
    Do the same for Video TWO on video track 2, Edit Mode/Effects/Video Effects/Transform/Crop etc. so that Video TWO occupies the right half of the screen. BUT end with Edit Mode/Effects/Video Effects/Transform/Horizontal Flip.
    Highlight the video on either side to make adjusts in the Properties Palette and appropriate Panel (position, cropping, etc). But, remember that if you make changes in the "flipped" right side of the screen, Edit Effects/Crop Panel right option will be for left and left option will be for right.
    You may or may not need the "flip" part of the effect.
    Please review and consider. If I have misinterpreted your question, please let me know with details and I will rethink what you seek.
    Thanks.
    ATR

  • Can I save both DVD-R and DVD-Video files onto the same DVD?

    Can I save both DVD-R and DVD-Video files onto the same DVD?

    Hi Stan,
    I just want the user to be able to run my video clips either on a 
    computer or on a standard DVD player. It would be nice to include both 
    formats on a single disc. I am new to this and am not sure what format 
    is most widely used for standard DVD players. Thanks for your response 
    and any guidance you can give me.
    Quinn
    Quoting Stan Jones <[email protected]>:
    Stan Jones http://forums.adobe.com/people/Stan+Jones created the discussion
    "Re: Can I save both DVD-R and DVD-Video files onto the same DVD?"
    To view the discussion, visit: 
    http://forums.adobe.com/message/4996961#4996961

Maybe you are looking for