Separating CF 7 and IIS on different servers

I have an application that I wrote and normally host in my
environment with CF 7 Enterprise and the Web server (IIS 6)
installed on the same server (same physical machine). However, I
now have a client that wants to install the application in their
data center and they require that the Web server be isolated on a
separate machine in their DMZ network segment, with the CF
application server isolated on another network segment. In
reviewing the CF 7 documentation, I couldn't find instructions for
installing and configuring this type of environment. Does anyone
know of any installation instructions for this configuration that
you could point me to? I also need to know if any special ports
need to be opened between the two separate network segments.

marco99 wrote:
> I have an application that I wrote and normally host in
my environment with CF
> 7 Enterprise and the Web server (IIS 6) installed on the
same server (same
> physical machine). However, I now have a client that
wants to install the
> application in their data center and they require that
the Web server be
> isolated on a separate machine in their DMZ network
segment, with the CF
> application server isolated on another network segment.
In reviewing the CF 7
> documentation, I couldn't find instructions for
installing and configuring this
> type of environment. Does anyone know of any
installation instructions for this
> configuration that you could point me to? I also need to
know if any special
> ports need to be opened between the two separate network
segments.
>
I believe the server documentation discusses this. I believe
the basic
process is to use the web configuration tool on the web
server and when
you run it, you point the web server to the ColdFusion
application server.

Similar Messages

ESB and BPEL in different servers

Hi ,
Is there any performance based advantage when we have BPEL and ESB in different servers ?

If you seperate them, it will have impacht on the perfromance. Services are called over the network, assuming BPEL and ESB are on different servers. Otherwise they can call each other via native binding if ESB and BPEL are in the server and container.
Marc
http://orasoa.blogspot.com

10g: HTTP Server and OC4J on different servers?

Can anyone assist with configuring HTTP Server and OC4J on different servers?
I installed AS 10g on both; our application runs fine on one server, with the HTTP Server and OC4J both on the same box.
I need to also test this with the HTTP Server on a separate box.
I added this to mod_ocj4.conf:
Oc4jMount /indox-qa1
instance://cvodev2:oas_dev2.cvodev2.int.sys.com:indox-qa1
Oc4jMount /indox-qa1/*
instance://cvodev2:oas_dev2.cvodev2.int.sys.com:indox-qa1
But when I try to access something like http://cvodev4/indox-qa1 I get this in the logs:
[Wed Jul 06 16:54:10 2005] [warn] [client 10.1.1.231] [ecid: 1120683250:192.152.136.127:1248:1544:1,0] MOD_OC4J_0184: Failed to find an oc4j process for destination: instance://cvodev2.int.camsys.com:oas_dev2.cvodev2.int.camsys.com:indor-qa1
[Wed Jul 06 16:54:10 2005] [error] [client 10.1.1.231] [ecid: 1120683250:192.152.136.127:1248:1544:1,0] MOD_OC4J_0145: There is no oc4j process (for destination: instance://cvodev2.int.camsys.com:oas_dev2.cvodev2.int.camsys.com:indor-qa1) available to service request.
[Wed Jul 06 16:54:10 2005] [error] [client 10.1.1.231] [ecid: 1120683250:192.152.136.127:1248:1544:1,0] MOD_OC4J_0119: Failed to get an oc4j process for destination: instance://cvodev2.int.camsys.com:oas_dev2.cvodev2.int.camsys.com:indor-qa1
[Wed Jul 06 16:54:10 2005] [error] [client 10.1.1.231] [ecid: 1120683250:192.152.136.127:1248:1544:1,0] MOD_OC4J_0013: Failed to call destination: instance://cvodev2.int.camsys.com:oas_dev2.cvodev2.int.camsys.com:indor-qa1's service() to service the request.
I did some ethernet sniffing and it doesn't look to me like the OHS box is even trying to contact the OC4J box.
Is there more configuration I need to do beyond this?
Thanks,
dwh

hi user11159690
Maybe this can help:
"Oracle® HTTP Server Administrator's Guide 10g Release 3 (10.1.3) B25211-02"
"7.32 mod_oc4j"
http://download.oracle.com/docs/cd/B25221_04/web.1013/b25211/confmods.htm#i1025739
Maybe more specifically "Oc4jMount":
http://download.oracle.com/docs/cd/B25221_04/web.1013/b25211/confmods.htm#CIHJBGFB
(tip : You can use "Your Control Panel" to make your name visible in forum posts.)
success
Jan Vervecken

ADS in ABAP and JAVA on different servers

Dear community,
I need to run ADS with ABAP and JAVA on different servers but after read and apply every step on The ADS Configuration Guide, still getting doubts and problems. Those steps work succesfully on a server with ABAP+JAVA on same server. Those are the problems:
When I perform the report test FP_TEST_00 i get this error:
ADS: com.adobe.ProcessingException: Problem accessing d(200101)
I haven't found a a detailed procedure to set on ABAP and JAVA on different servers...
Do you know any procedure to set this scenario??
As a result, I don't know which role i must assign to adsuser on Java UME because i did not found any SAP_ADSCALLER role as i have ridden on some forums or blogs...
I try to set ADS on ABAP+JAVA on different servers by this official guides:
The ADS Configuration Guide:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30a9630b-4f89-2a10-6fab-e311b3ffd9a6
The ADSConfiguration Guide for Print Scenarios
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a04ef746-4c89-2a10-0f8e-eb2b3460fb7c
Thanks in advance
Kind regards
Scottie

HI again,
ADS_AGENT now has sap_all but still same problem:
Creating or Changing the Destination Service, On Visual Administrator/Destinations/HTTP/ FP_ICF_DATA_<SID>
When I set the URL http://<hostname>:<HTTP_port> i am getting error Received HTTP response 502
- If I paste the http://<hostname>:<HTTP_port> +
- Enter the appropriate client number of the system, where the service user ADS_AGENT exists into the client field. Keep the other fields System ID and Language empty +
- Under Logon Data, choose BASIC in the Authentication field. +
- Enter ADS_AGENT in the Username field and enter the same password as given for this service user in the SAP NetWeaver AS ABAP in the Password field
- Choose Save and Test and Received HTTP response 502 appears.
But if I paste on Explorer http://<hostname>:<HTTP_port>/sap/bc/fp/form/layout/fp_test_00.xdp, request User (ADS_AGENT) +Pwd and work ok, so error only appears by Visual Administrator...
Anybody knows how can resolve this doubt?
Thanks in advance

BPEL and ESB in different Servers

Hi ,
What is the advantage of having BPEL PM and ESB installed in different servers ?

In my knowledge it has it own merits and demerits
IF (BPEL and ESB) installed in dfferent OC4Js (JVMs)
Merits
1) Individual JVM for each component means more memory allocation and support from JVM
2) More number of processes can be deployed.
DeMerits
1) ESB and BPEL communication can happen via SOAP over HTTP only whereas had these been deployed in the same JVM (oc4j) it can do native communication.
Edited by: cdmnagaraj on Apr 22, 2009 5:17 AM

Repository and data on different servers

I look for information about installing HTML DB.
Is it possible to instal HTML DB repository and application data on two different servers? If yes, how.
Thanks,
SL

Yes, but you have to use db links which are a bit slow. Basically, think of HTML DB as working with only the data in the db in which it is installed. You can use the standard Oracle db techniques, such as Materialized Views over db links to get the data local, or again, use just db links. Your app will parse it's PL/SQL and SQL as a SCHEMA in the db in which HTML DB is installed.
Tyler

DI Server and IIS on different physical Servers

Hi all,
I'm pretty new to this topic regarding Web-Services and DI-Server.
We are trying to build a solution which enables a customer to change BP-data through the internet.
In the DI-Server Sample program from SAP I've found a reference to the SBODI_Server.dll.
Now at customer projects it will be most likely the case, that the IIS Server will be on the other side of the firewall than the SBO Server. Which means, the webservice will be running on another physical server than the DI- Server.
How do I have to install the different components on the servers and how do I have to define the addressing on my webservice to connect to DI Server?
Any tips appreciated
Regards,
Marcel

Hi Marcel,
Have you considered implementing a Web Service layer that runs on the server where DI Server is installed. This layer would take care of interacting with the DI Server. The IIS application that is located in the DMZ could then access this intermediate layer without having to worry or even know about the underlying DI Server installation.
Henry

OBIEE 11g and Weblogic on different Servers - Windows 2008 R2

Hi
Can we install OBIEE 11g(BI Server and Presentation Servers) on one server and weblogic and another server. We have a requirement where we need to differentiate all the components on to its own server for performance reasons. How can we do the configurations if we have installed on how to talk to weblogic after the installations.
Thanks

Yes we can do that
a) Install BIS and BIPS on one server and deploy BIPS plug-in on Weblogic server where it is installed,so the both will talk with the weblogic server.
http://docs.oracle.com/cd/E10415_01/doc/bi.1013/e10417.pdf
Mark if it helps

NFS and LDAP on different servers: Problems with location of home director

Dear Apple Experts.
We are using LDAP server for user authentification
and NFS server for home directories.
Both are decictaed servers on differnt machines.
on the NFS server there are directories
/home/urpi
for staff's home directories
and
/home/students
for student's home directories
both are mounted to the Mac minis in
/Users directory
so
/Users/urpi
contains home directories for staff
/Users/students
contains home directories for students
Authentification works well andpermission are set as needed
but OS X shows missing home directories for LDAP authentificated users
and terminal shows missing home directory
for me it is
/home/urpi/fodrek
I was tried to mount NFS to /home, but it is not allowed
Would I ask if there is any setting to add directories, where home directories are placed,please?
I look forward hearing form you.
Yours faithfully
Peter Fodrek

So none of these machines are Snow Leopard servers?
What exactly do you mean when you say you tried to mount the NFS share to home? Can you copy and paste the command and error?
It sounds as though you don't actually have the NFS shares mounted. Assuming this is so, you might want to investigate how the automount command works so that your MacMinis mount the NFS shares on boot.
If your NFS/LDAP server is an OS X 10.6 server, set the shares to be automounted as user/group directories. Make sure your LDAP server is providing correct information on the home directory location. If it is local, I think the home directories need to be in /Users. If your mounts are indeed working but you cannot login, you might consider making links from /Users to /home/urpi or /home/students on an account-by-account basis (could be done with a quick shell script).

FMS and Encoder on different servers

Hi,
We've setup FMS on one server and our cameras and Flash Media
Encoder on another. Can I assume this is doable? Can we do this? Do
I have to configure FMS to allow a connection from our other
server?
Under the FMS URL field in FME we've put:
rtmp://ourip:port/live, but it says it can't connect?
Am I doing something very stupid here? I'm assuming that FMS
needs to certify a connection from out other server..
Sorry.. dumb I know, but am kind of new to this.
Thanks,
Graham

Not sure if this was resolved but.......
Go into the applications folder and you should have two
folders in there called live and vod.
Live can be used for live streams and vod (Video on Demand)
can be use to pull pre recorded movies.
Go into the live folder and create another folder with a name
that is relevent ie test.
This folder will store temporarily the streaming video. Even
when you are streaming live, and you open the folder, it will still
be empty.
InFlash media encoder that is on the machine with the camera
you should put into the FMS URL:
rtmp://ipaddressofcomputer/live/test
in the Stream name bos, put in anything you want as long as
it is different to another stream from another compueter going
intothe same folder, without the .flv tag...ie: video
If you have no admin access issues to the FMS machine,
pressing connect should work and disconnect should be named on the
button.
On the root directory of FMS open up: fms_adminConsole.htm
You should see in the applications section a stream running,
saying it is connected via Netstream.

MDB and JMS on different servers

Hi,
My MDB is deployed on a different domain from the JMS server. Both are on weblogic.
While deploying weblogic, I m getting an error: Unable to create a connection.
Can anyone give pointers?
I have ensured the following:
1. The JMS server starts before the MDB server
2. The following data is mentioned in weblogic-ejb-jar.xml:
jndi name of the remote queue
provider url--- t3://hostName:port
jndi name of the remote connection factory
is there anyting else that i m missing ?
thanx and regards
Shivraman Giri

Hi,
Thanx for responding.
I will keep in mind these points when I use a foreign JMS provider. T
Right now I m getting problem when the JMS provider is remote but native ie. MDB and JMS are both on Weblogic. This obviates the need to mention Initial Context. Only the provider URL is to be specified.
Can you suggest a reason as to why i my EJB container (first weblogic ) is unable to connect to JMS provider (another weblogic)
regards
S.G

PcP and Wiki on Different Servers

I'm trying to take load off a server and setup PcP on a different server than Wiki, but it doesn't post to Wiki. Is it possible?

Yes, but you have to use db links which are a bit slow. Basically, think of HTML DB as working with only the data in the db in which it is installed. You can use the standard Oracle db techniques, such as Materialized Views over db links to get the data local, or again, use just db links. Your app will parse it's PL/SQL and SQL as a SCHEMA in the db in which HTML DB is installed.
Tyler

Separating itunes accounts and libraries for different users

We've owned Apple portable products since the early iPod generations... But things are starting to get complicated. We started with just one device (an 80GB iPod) and then got another (an iPod shuffle)... After that we purchased our first iPhone, then another, then 2 more as they upgraded and got better. Now in recent weeks we've also added an iPad 2 for my husband and an iPod touch for our son... The problem is we're still only using our original single itunes account...
Now over the years we've amassed a huge library of songs and applications which everyone shares but with the creation of iCloud we've run into problems. For example, recently when I synced my iPhone 4, I ended up with all my husband's contacts on it... So I deleted them from my phone the following day. iCloud then kindly also removed them from my husband's iPhone 4S without him so much as plugging the phone into the PC :-/ He was less than impressed.
My 10 year old son has been given an iPod touch for his birthday and wants to 'facetime' and send imessages to his friends and to us... But because we only have the one account, he's using my email address to do it. And because my email address is also linked to my itunes account and my phone, I also receive copies of all his text messages on my phone... and copies of the ones I send to him... Security wise I suppose this could be a good feature to have as a parent... But if it means he's also receiving all the imessages sent to me, we may run into problems in the near future!!
So my question is, is there a way to separate and duplicate our library so that we can divide and share the music and apps we all use, whilst still creating separate itunes user accounts so that iCloud doesn't interfere with our individual syncing preferences?
We only have 1 PC in the house so using seperate computers is not an option for us at the moment... And I've also tried the shift and open function to create a new user for itunes but nothing happened!! Itunes just opened as per normal :-/

Well I thought we had done that, but we still ran into trouble with icloud firstly adding my husbands contacts to my phone then deleting them all from his phone!!
I have solved the problem of the cross texting by adding my son's email address as his in and outgoing server so that's all good now.
I still have the issue of having him on our itunes account... He's been given itunes gift cards for his birthday and he doesn't want to just add them to my account... Nor do I want him to have my password for security reasons!
Any idea how I can navigate that situation? I suppose creating him his own itunes account is the best way to go but again, I tried following the instructions listed online and nothing happened. My itunes account opened as normal. No option to create a new account was given to me... It also means the first time he syncs his iPod, all the applications he has on it now (from the single family account) will be erased and I suppose, he'll have to purchase them all again which would be ridiculous!! :-/

Setting MX Record When Web and Email on Different Servers

We're moving our website to a new server, but am worried about how to set the DNS record so email keeps going to the old one.
I understand that when I change the A name to the new website's IP address, I should make a new A name, "mail.ourdomain.com" that points to the old/email server's IP address. Then I'd switch the MX record to mail.ourdomain.com.
Now, assuming that's right, what do I need to change on the old/email server. Do I need to change its mail setup to account for "mail.ourdomain.com" instead of simply "ourdomain.com"? Bearing in mind that we want that server to continue accepting mail in the format [email protected]

ROb
If I understand your situation correctly you shouldn't have to change the MX record. You should simply add a record for www and a "null" record that go to the new IP where your website is listed. Post a domain and a dig for more specific help if you like.
Sean

OBIEE 11g and Weblogic on different Servers

Hi every
Can we install OBIEE 11g on one server and weblogic and another server?
How to indicate in obi configuration, that weblogic is on another server?
Is there a manual or link that prove it?
I appreciate your prompt replies
Regards
Pedro

Install BIServer and BIPresentaionServer on one server and deploy BIPS plug-in on Weblogic server where it is installed,so the both will talk with the weblogic server.

Separating CF 7 and IIS on different servers

Similar Messages

Maybe you are looking for