Separating sound from visuals in Photoshop Cs6

How does one seperate the sound from the visuals of a shot video clip so the audio can be treated as a separate entity to the visuals in Photoshop cs6?

Well, the video-editing capabilities in PS CS 6 are limited, and rather limited.
Adobe offers a wonderful, full-featured video-editing program, Premiere Pro, that will allow much, much more control over Video and Audio.
For pure Audio-editing, there is also Adobe Audition, which will easily rip the Audio from an AV file, for extensive editing of just that Audio.
PS CS 6, related to Video, is like an adjustable spanner - works for many applications, but is not the same as having a full roll-away chest of Snap-On tools (Premiere Pro).
Good luck,
Hunt

Similar Messages

  • How do I remove sound from videos in PS CS6 extended?

    I have a series of movies which I intended to individually import into PhotoShop CS6 Extended, add end credits, and then export WITHOUT SOUND. For the life of me, I can't see any way to remove the audio from the movies! I'm sure this feature was easily available in the PS CS6 beta version. Any clues?

    I have the same problem as Ham. I can't see the context menu for sound.
    I saw that context menu in the video that Sudarshan mentioned, but it's not in my Photoshop CS6, where - like Ham experienced - i only see a context menu for Motion.
    Just as Ham, i do see the sound context menu at the beginning of my work. I even got to clips in a project where one clip offers sound editing, the other doesn't.
    Clips where sound can be edited appear as a blue bar. Clips where sound cannot be edit appear as a violet bar. Even if i add an MP3, it appears as a violet bar, so sound cannot be edited while motion editing is offered. I also tried to dampen the sound via the opacity control in the layer panel, but it didn't work.
    I already created a complicated project out of 6 clips. I can't restart now to edit audio before anything else.
    Is there any way to get audio editing (in the limited way that's part of Photoshop CS6 sometimes) in ALL clips within a project?
    Thanks!

  • Photoshop CC not allowing JPEG import from Nikon D800 - Photoshop CS6 worked fine.

    When inporting JPEG from Nikon D800 nothing happens - screen remains blank.
    Went back to my provious version (Photoshop CS6) and it worked fine.

    Curt Y gave you some good advice.
    Remove your memory card from the camera and plug it into a card reader.
    Drag/copy the files from the memory card to your hard drive.
    Eject your card from the card reader and reinsert into camera.
    Then open the files from the hard drive.
    It is not a good idea to open/work on files on the memory card, while either in the camera or the card reader.
    Yes, you may have done this differently in the past, but it is much SAFER to work on the files after they have been moved to your hard drive.
    Please try the above proceduce and report back if you are still having issues.

  • Trouble moving from lightroom to Photoshop CS6 raw editor

    I am having trouble moving from my lightroom 4 to Photoshop camera raw. I can move directly to Photoshop but would like to use the raw editor in photoshop CS6 and not the lightroom editor

    Hi,
    You could use Photo>Edit In>Open as Smart Object in Photoshop
    (or right click on the photo and Edit In>Open as Smart Object in Photoshop)
    Then double click on the smart object thumbnail in the layers panel to open camera raw.

  • From CS4 to Photoshop CS6 by upgrading ???

    Is it possible to pass from Photoshop CS4 to Photoshop CS6 by upgrading ???

    CS5 and CS5.5 are the only qualifying versions for upgrading to CS6.
    Gene

  • No Way to disable audio from Video in Photoshop CS6

    I have a video clip that has an audio track that I want to remove, however it seems that the track specific "mute or unmute audio track" and "Disable Audio Playback" buttons only affect playback inside of Photoshop and do not affect the exported output. Am I missing something or is this the designed effect of these buttons? Is there a way to remove the audio track in the current build of Photoshop CS6 without going to something like Premiere Pro?
    Thank you,
    Brandon Boswell

    Hi Brandon,
    This might help:
    http://forums.adobe.com/message/4328012#4328012

  • Open PSD files from Bridge to Photoshop CS6

    In previous version I can open psd files to Photoshop with double clicks. Now it open to QuickTime only. How can I go back to the the old way? And I don't want to "place" the file to smart objerct either.
    Please help.

    Hi,
    In Bridge cs6 look under the Bridge preferences (Ctrl+K or Cmd+K) and then under File Type Associations, where you can choose the applications to open files from bridge.

  • No sound from MTS files photoshop 13

    I've just installed PhotoShop Elements 13, having previously used PSE 10.  In the new version when playing .MTS videos from from Sony camera, there is no sound.  I previously had this with PSE 10, but installed some codecs and it worked.  I've tried to do the same but with no joy.  The videos play OK, just with no sound.  Can someone direct me to a solution please?

    Hi Duncan,
    Sorry for the inconvenience caused.
    Please update your PSE13 to free 13.1 update available.
    This should fix your problem.
    Please let me know if you have any queries.
    Thanks,
    Anwesha

  • I can't update camera raw 9.0 from within my Photoshop CS6 update menu. It says there is a failure with Adobe Download Manager. I can't successfully load the new version of the Download Manager because it sends me to a link that Adobe says doesn't exist a

    I seem to be stuck in a deadend. I need to update ACR to 9.0 for Lightroom 6

    Remove Office 2008 for Mac using Microsoft deinstall procedure. Reinstall Office 2008 for Mac.  If there are updates, apply them. Using Disk Utility, verify/repair permissions on your boot drive.
    Does Office for Mac 2008 now work correctly? If not, you may want to repeat the above first sentence, and then update to Office for Mac 2011, and apply the latest (14.4.8) update which has Yosemite fixes.

  • Adobe Photoshop CS6 Cannot be opened because of a problem

    My Photoshop (from my CS6) on Mac would not launch all of a sudden. I get the error title same as the title of this post. I tried clearing my launcher chance as well as re-installing. I am attaching the error report and two screenshots here. Any help would be appreciated.
    Report Text:
    Process:         Adobe Photoshop CS6 [4041]
    Path:            /Applications/Adobe Photoshop CS6/Adobe Photoshop CS6.app/Contents/MacOS/Adobe Photoshop CS6
    Identifier:      com.adobe.Photoshop
    Version:         ???
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [371]
    Responsible:     Adobe Photoshop CS6 [4041]
    User ID:         502
    Date/Time:       2014-06-02 10:38:35.888 -0400
    OS Version:      Mac OS X 10.9.3 (13D65)
    Report Version:  11
    Anonymous UUID:  6164A238-F280-BEBA-FABE-A0525AB6BA29
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    Dyld Error Message:
      Library not loaded: @executable_path/../Frameworks/AdobeAXE8SharedExpat.framework/Versions/A/AdobeAXE8SharedE xpat
      Referenced from: /Applications/Adobe Photoshop CS6/Adobe Photoshop CS6.app/Contents/MacOS/Adobe Photoshop CS6
      Reason: no suitable image found.  Did find:
      /Applications/Adobe Photoshop CS6/Adobe Photoshop CS6.app/Contents/MacOS/../Frameworks/AdobeAXE8SharedExpat.framework/Versions/A/AdobeAXE8S haredExpat: stat() failed with errno=20
      /Applications/Adobe Photoshop CS6/Adobe Photoshop CS6.app/Contents/MacOS/../Frameworks/AdobeAXE8SharedExpat.framework/Versions/A/AdobeAXE8S haredExpat: stat() failed with errno=20
    Binary Images:
        0x7fff6ce94000 -     0x7fff6cec7817  dyld (239.4) <042C4CED-6FB2-3B1C-948B-CAF2EE3B9F7A> /usr/lib/dyld
        0x7fff85fe8000 -     0x7fff862e6fff  com.apple.Foundation (6.9 - 1056.13) <2EE9AB07-3EA0-37D3-B407-4A520F2CB497> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
        0x7fff87697000 -     0x7fff876deff7  libcups.2.dylib (372.4) <36EA4350-43B4-3A5C-9904-10685BFDA7D4> /usr/lib/libcups.2.dylib
        0x7fff8969e000 -     0x7fff8a214ff7  com.apple.AppKit (6.9 - 1265.20) <D2A7AF23-0FEA-3D7D-9CF5-B4E262224577> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
        0x7fff8deba000 -     0x7fff8e114ffd  com.apple.security (7.0 - 55471.14.4) <1D5DA20E-DB48-3E1D-9BF5-BAA694192B25> /System/Library/Frameworks/Security.framework/Versions/A/Security
        0x7fff8f2f9000 -     0x7fff8f307fff  com.apple.opengl (9.6.1 - 9.6.1) <B22FA400-5824-36AF-9945-5FEC31995A0E> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
        0x7fff8fc80000 -     0x7fff8fc80fff  com.apple.Carbon (154 - 157) <45A9A40A-78FF-3EA0-8FAB-A4F81052FA55> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
        0x7fff8fd03000 -     0x7fff8fe9fff3  com.apple.QuartzCore (1.8 - 332.3) <72003E51-1287-395B-BCBC-331597D45C5E> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
        0x7fff90006000 -     0x7fff901ebfff  com.apple.CoreFoundation (6.9 - 855.16) <A63E680E-E4B2-368B-8564-9DBE0D8DDB91> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
        0x7fff90261000 -     0x7fff902cdfff  com.apple.framework.IOKit (2.0.1 - 907.100.13) <057FDBA3-56D6-3903-8C0B-849214BF1985> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
    Model: iMac12,2, BootROM IM121.0047.B1F, 4 processors, Intel Core i5, 3.1 GHz, 16 GB, SMC 1.72f5
    Graphics: AMD Radeon HD 6970M, AMD Radeon HD 6970M, PCIe, 2048 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393930353432382D3034332E413031472020
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393930353432382D3034332E413031472020
    Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393930353432382D3035312E4130304C4620
    Memory Module: BANK 1/DIMM1, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393930353432382D3035312E4130304C4620
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.74.0-P2P
    Bluetooth: Version 4.2.4f1 13674, 3 services, 23 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: WDC WD1001FALS-403AA0, 1 TB
    Serial ATA Device: HL-DT-STDVDRW  GA32N
    USB Device: Hub
    USB Device: iPod
    USB Device: Generic USB Hub
    USB Device: Internal Memory Card Reader
    USB Device: IR Receiver
    USB Device: FaceTime HD Camera (Built-in)
    USB Device: Hub
    USB Device: USB to ATA/ATAPI Bridge
    USB Device: USB Receiver
    USB Device: BRCM2046 Hub
    USB Device: Bluetooth USB Host Controller
    Thunderbolt Bus: iMac, Apple Inc., 25.1

    Reinstalling resolved the issue. In case others are having the same issue, here is some more detail on this.
    After a hard drive failure, I had to restore my machine from a Time Machine backup. After that Photoshop would not launch. All other Master Collection CS6 apps were working, except Photoshop.
    When I tried to reinstall from the DVD, while installation was in progress (several steps after supplying and verifying my License Key), it would give an error message that my copy of the CS6 is counterfeit and installation would stop.
    After talking to Adobe Tech Support on the phone, I uninstalled Photoshop, downloaded the trial version of CS6 from online (here is the link - Other downloads), then installed Photoshop from this download instead of my factory supplied DVD. This time, the installation went through and I was able to launch Photoshop after installation.
    No activation was requires since other CS6 apps were already activated in the machine.

  • Constant Adobe Photoshop CS6 Crashes

    Hello there, today I have been experiencing multiple crashes from my Adobe Photoshop CS6 Extended program.
    I am running a Windows 7 64bit computer, and just get the message, "Adobe Photoshop CS6 Extended has stopped working" and no crash report is given to me or saved that I know of.
    I reset my preferences, but that did not fix the issue. It is also probably not a performance issue, I have 64gb`s of ram and an Nvidia 680 gpu, plus Photoshop has worked fine for me for a long time.
    Before I reset my preferences I thought it may have been a plugin I had called Coolorus, but I disabled it and that didn't help anything.
    When I open Photoshop there is a recovered file from the past of what I was currently working on, I'm not sure if that info helps at all.
    My version of Photoshop CS6 Extended is: 13.0.1 x64. (Not sure if that's the latest version since I don't think CS6 Extended was listed in the update list, and my update manager says there aren't any updates.)
    If I may not be looking in the right places for the crash report please tell me, and if anyone has a resolution with just this info, please tell me (pretty sure it's not enough though.)
    Thank you for the help! ^^

    Thank you so much, here are a few:
    Faulting application name: Photoshop.exe, version: 13.0.1.34, time stamp: 0x5269b25c
    Faulting module name: Photoshop.exe, version: 13.0.1.34, time stamp: 0x5269b25c
    Exception code: 0xc0000005
    Fault offset: 0x0000000001725cc5
    Faulting process id: 0x20a4
    Faulting application start time: 0x01cfa839ca540198
    Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Photoshop.exe
    Faulting module path: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Photoshop.exe
    Report Id: db6ef037-1433-11e4-b5dd-00268334144b
    Details in XML:
    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> 
    - <System> 
    <Provider Name="Application Error" />  
    <EventID Qualifiers="0">1000</EventID>  
    <Level>2</Level>  
    <Task>100</Task>  
    <Keywords>0x80000000000000</Keywords>  
    <TimeCreated SystemTime="2014-07-25T19:42:49.000000000Z" />  
    <EventRecordID>23134</EventRecordID>  
    <Channel>Application</Channel>  
    <Computer>xXCintra</Computer>  
    <Security />  
    </System>
    - <EventData> 
    <Data>Photoshop.exe</Data>  
    <Data>13.0.1.34</Data>  
    <Data>5269b25c</Data>  
    <Data>Photoshop.exe</Data>  
    <Data>13.0.1.34</Data>  
    <Data>5269b25c</Data>  
    <Data>c0000005</Data>  
    <Data>0000000001725cc5</Data>  
    <Data>20a4</Data>  
    <Data>01cfa839ca540198</Data>  
    <Data>C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Photoshop.exe</Data>  
    <Data>C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Photoshop.exe</Data>  
    <Data>db6ef037-1433-11e4-b5dd-00268334144b</Data>  
    </EventData>
    </Event>
    Another one:
    Faulting application name: Photoshop.exe, version: 13.0.1.34, time stamp: 0x5269b25c
    Faulting module name: Photoshop.exe, version: 13.0.1.34, time stamp: 0x5269b25c
    Exception code: 0xc0000005
    Fault offset: 0x0000000001725cc5
    Faulting process id: 0x1f68
    Faulting application start time: 0x01cfa83264b07954
    Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Photoshop.exe
    Faulting module path: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Photoshop.exe
    Report Id: 08674e05-1427-11e4-b5dd-00268334144b
    And one more:
    Faulting application name: Photoshop.exe, version: 13.0.1.34, time stamp: 0x5269b25c
    Faulting module name: Photoshop.exe, version: 13.0.1.34, time stamp: 0x5269b25c
    Exception code: 0xc0000005
    Fault offset: 0x0000000001725cc5
    Faulting process id: 0x1650
    Faulting application start time: 0x01cfa830f7866978
    Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Photoshop.exe
    Faulting module path: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Photoshop.exe
    Report Id: 5c710954-1425-11e4-b5dd-00268334144b

  • Install problem with Photoshop CS6

    Hello! I have here such problem. I downloaded from your site Photoshop CS6 I chose the trial version, I started establishing, but after completion of installation writes: there was a mistake some components to establish. How to correct this problem that it was established without any mistakes?

    Adobe Forums: FAQ: How do I uninstall the Photoshop CS6 beta?
    Mylenium

  • Cannot Find ICON Photoshop CS6

    AD005154751  Order number.  Just upgraded from Cs4 to Photoshop CS6.  Have downloaded  199.00
    Cannot find ICON on desktop, or in my programs.  Please help.
    Once located, do I need to remove CS4?
    Claudette

    All is good.  All installed and working beautifully.
    Claudette

  • Anyone have these problems installing Photoshop CS6?

    Aloha! Seems Photoshop CS6 has errors for camera profile installer 6.3 and 7.0.  Error 145: Directory not empty.
    Not sure how that can be an issue with a new install???

    *Aloha  Mylenium!
    Excellent point and since Adobe provides such a less than format I could
    not cut and paste that info from the Adobe Photoshop CS6 error window to
    the Adobe forum window. I figured maybe someone might eventually email me
    so I cut and pasted the error window data to my gmail. That was possible
    but somehow it is not possible on Adobe for the forum.
    Here is "all" the info I have at my disposal that was provided by Adobe at
    the time the Photoshop CS6 install was completed.
    *Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For
    example,  ERROR: DF024, DF037 ... WARNING: DS013 ...

  • Open files directly to Photoshop CS6

    I am using CS6. In the older versions I was able to open a 8 bit jpeg file directly to Photoshop (in this case I tried to open from desk top). Now I find that the "open with" dialog box only shows Bridge. That means I can only open the file via ACR. However when I do that my file change  to 16 bits. If I convert to 8 bit again, color become desaturated. I guess data had been compressed a few times. My question is how can I open my file to Photoshop directly without changing the bit depth?
    Thanks

    One way:
    Right click on the jpeg, and select "choose default program" from the context menu.
    If Photoshop is not listed,then use the Browse button to navigate to the Program Files (86) (32 bit) or Program files (64 bit) folder and choose the Photoshop.exe from the Adobe > Photoshop CS6 folder in order to add it.
    Check the box "always open with this program"  click OK and it should always open with Photoshop.

Maybe you are looking for

  • I've been having a problem with Safari failing to load about 10-20% of pages.

    Safari is returning the message 'failed to connect to server' but sites opening fine in other browsers so ISP connection seems fine. Safari will repeatedly fail to open a page when it is on the same server/site as other pages that load correctly and

  • Can AS1 code call AS3 code?

    I was wondering if there was any way for AS1 code to call AS3 code. I need to write a server extension for SmartFox Pro. I just found out that the only version of action script that SmartFox sever extensions can be written in is AS1. However, I have

  • Previews folder in the iPhoto Library

    Hi all,  Anyone know what the previews folder is for in the iPhoto library (Show package contents) - and also if it's safe to delete?  It's 8gb and would give me some breathing space on my SSD. 

  • Importing Footage

    Don't know if it matters at all, but figured it's better to check first..  ..in general, if I am using footage from 2-4 full DV tapes from a Mini-DV camera (of course putting all imported assets on a 2nd internal "E" drive), is it better (for Pro & P

  • Edge Crashes when saving

    My project consistently crashes when I try to save Ive had an 'Out of Memory' popup before but now it just crashes while saving. Ive managed to copy the report I get, its here: https://www.dropbox.com/s/ue65x5lg638y6x6/Edge_Animate_crash.rtf Is there