Seperate Audio Source When Capturing Video

I am using a DVcam to capture video and want to use a seperate device altogther to capture the audio track, Is this possible to setup in Premiere Elements? If so, how do i do this? Thanks for the help.

Hi Steve,
Thanks for responding. My question was in regards to the process of Capture. Perhaps a better way of asking this question is, can I capture two different devices/sources at the same time? One a video from a DV Cam and the other audio being fed from a mixer. It seems like it should be an easy thing to do, but i have not found the place wher eyou can tell the program there are two different sources. Hope that is clearer.
Thanks!

Similar Messages

When capturing video it always comes in dark

I have noticed that when capturing video it always comes in darker then the original video source. I have used the Canopus ADC as well as a JVC BR-HD50 unit. I can't figure out what to do. I have run all video through Calibrated CRT's and everything looks great. ANy advice or a simple correction would be great.

I'm having a hard time understanding this post.
Which Canopus ADVC and what is the BR-HD50, does it have proc amp/TBC capabilities? If so, were those settings reset to unity before capture?
What does "running your video through Calibrated CRT's" mean? I'm assuming it means you've QC'd the video before capturing so you know what it looks like and then are viewing it through a video I/O on your computer to the same production monitor?
This leads to my next question; how are you judging that your captured video is too dark?

How to change container when capturing video?

How can I change the container to Quicktime when capturing video from a DV camera (Canon GL1)?
I'm running Premiere Pro CC on a Windows 7 Pro computer.

switch to a mac!!!!
pc DV capture format: .avi
mac DV capture format: .mov
why on earth do you want .mov files instead of .avi???!!!
hahahahahahahahahaha!!!

Imovie crashes when capturing video

I have a MAC powerbook pro with IMovie 8. The program works fine except when capturing video. It will capture about 20-40 seconds of video then the "application quits unexpedtedly". I have tried two different cameras and the same thing happens with both.
I also have Final Cut loaded on the computer and Final Cut will capture fine from both cameras.
Any ideas why IMovie is crashing?
Thanks,
eden

I am having exactly the same problem. The most infuriating thing is that i have only had this mac for 2 months and when i first brought it it worked fine, with exactly the same camera and settings! I downloaded all the updates and managed to import 20 minutes of footage (which got my hopes up) but then it started to crash again
does anybody have a solution?

White band when capturing video

When capturing video I get a periodic white band covering 75% of captured video using all Sonic MyDVD, Windows Movie Maker, and ShowBiz software. I have a NVidia FX 5600 card usingWin XP home. The band lasts for 5 to 15 seconds, but is not at a regular rate and sometimes it doesnt happen at all when recording 30-60 minutes of video. Am downloading updated drivers right now but asking for further ideas.

sctbrd,
I have the exact same problem as you do with my Fx5600-vtr-128 capture card..
"jorge' does also have the same problem..Looks like it's systemic with the Nvidia card or drivers not being able to work with the WDM driver..I'll try to post a screen shot but jorge already has and I'll bet if you check his post you will find your exact bar or srtip...
Good luck,
jolphil

When capturing video; how do I get rid of the green lines at the bottom of the frame?

When capturing video; How do I get rid of the green lines at the bottom of the frame?

s.haider
You have Canon ZR950 mini DV Camcorder, why not make a firewire connection and do DV data capture into the Premiere Elements 8.0/8.0.1 Capture Window?
Do you have any reference for what you are attempting to do or is this a creation of your own? Could you confirm what you describe as "just capturing video".
a. From your information, you are doing Get Media/Webcam or WDM Device with the Capture Window showing the Capturing Device as "Dazzle DVD 100 Video Device". What type of connection are you making between the Canon ZR950 and the Dazzle DVD 100 and the computer?
b. What exactly do you expect to be putting on the Premiere Elements 8.0/8.0.1 Timeline from this capture...DV AVI or something else?
Coming from the perspective of Premiere Elements 8.0/8.0.1 known issues, I would ask you to consider:
a. Remove the check mark next to AutoAnalyzer in the Capture window. Even if you were doing this Capture the "usual way", that is highly recommended.
b. Go to Edit Menu/Preferences/General, and compare your results with and without a check mark next to enable GPU playback. As a cross reference, please go to Edit Header/Effects/Video Effects and detemine if there is a category of Effects named GPU Effects. Do the same thing for Edit Header/Transitions/Video Transitions and determine if there is a category of Transitions named GPU Transitions.
And, the general drill for all users of Premiere Elements 8.0
a. Are you working with the automatic Background Rendering and AutoAnalzyer Features turned Off?
See Premiere Elements workspace Edit Menu/Preferences/General for background rendering option and Elements Organizer workspace Edit Menu/Preferences/AutoAnalzyer Options for AutoAnalzyer options.
b. Are you working from the 8.0.1 Update version of the program?
Please consider.
We will be watching for the outcome.
Thank you.
ATR

Audio problem when importing video files.

Hello everyone,
I just started using FCP X a few days ago for a university project and I seem to encounter an audio problem when importing videos in .mp4, .mov format or via the import from camera option.
Indeed I need to import videos in .mp4 and .mov format into FCP X. The import in itself is normal I can see my videos into the events/clips library and if I play them from the library I can hear the sound quite perfectly.
However, when I want to edit my videos and put it in the timeline, there is no audio. As a result I started to think that my videos could be the problem so I tried the option "import from camera" option using the Isight camera of my macbook pro but the same things happened. I could hear the sound from the events/clips library but not from the timeline (I can't see any audiowaves in the timeline).
I found a solution using quicktime and extracting the audio of the video in .m4a then importing the videos files and the audi files corresponding but it's a long process and a waste of time as FCP X should be able to import the audio of my video into the timeline directly. Especially if it can read it from events/clips library.
I hope I explained myself clearly and you could help me resolve my problem.
Cheers
Christophe
PS: I'm using FCP X version 10.0

Update to 10.0.5.
You have an incorrect setting when you edit. Try trashing your preferences. Post screen shots of your timeline and toolbar.

[FCP S2] How to make each scene a clip when capturing video?

Hi,
I'm totally new to Final Cut Pro and have recently purchased my Mac Pro and FCP Studio 2. I come from background of Pinnacle Studio on PC and so this seems like a huge leap.
Any way, With Pinnacle Studio, when capturing video it automatically made each scene (point between Start rec and Stop rec on Video Camera) into a clip. I could then drag&drop the clips I wanted into my project timeline. I can tnen eaily add transitions inbetween these clips in my time line.
Now with FCP S2, it seems to capture the video as one long clip and apparently, as I've been told, the only way to separate each scene is to manually cut at the point of a scene cut. Now I can't believe that $1200 software would make you do that and $99 software does this automatically. So I have come here in the hope to find an expert who can explain to me, in very simple terms and steps, how I can achieve this in FCP S2.
Any help will be much appreciated.

Here is a bit of the FCP manual that relates to capturing a single tape and capturing individual clips for each break in TC:
How to Avoid Capturing Clips with Timecode Breaks
The “On timecode break” pop-up menu in the General tab of the User Preferences
window gives you several ways to avoid capturing clips with timecode breaks. It’s
important to set this option to suit the way you intend to capture your clips. You have
several options:
Â Make New Clip: This is the default option. Video that’s already been captured before
the break in timecode is saved as a single media file, with its Out point set to the
frame occurring immediately before the timecode break. Final Cut Pro then
automatically continues capturing video after the dropped timecode frame as a
second media file. When this option is selected, clips captured after timecode breaks
are named with the original name and the number of the clip. For example, if the
first captured clip’s name is “Cats Playing,” the second clip’s name is set to “Cats
Playing-1.”
This is a good option to choose if you are capturing an entire tape. For example,
suppose you are capturing the entire contents of a 60-minute tape that has four
timecode breaks. Instead of restarting the capture every time a timecode break is
detected, Final Cut Pro captures all media from the tape as five clips, skipping over each
timecode break and ensuring that the timecode of all captured media is frame-accurate.
There you have it.

A way to adjust audio when capturing video?

I transfered some video/audio and am having distortion in some audio.
The original audio does not peak and when I captured it in Premiere CS6, it is not peaking out, but when I play back, I can hear occasional distortion. The video is up at:
http://www.youtube.com/watch?v=aNNgJiZMrRA
Does this sound like it is overmodulating or is something else happening?
Is there a way to adjust audio when capturing audio or is it a straight feed? Wondering if I can lower the audio input to try to fix.
thanks in advance for your help,
Charlie

How are you capturing the content? Because in my experince premiere doesn't have a way to adjust the audio levels of what your capturing. However if you post how you are capturing the footage in more detail I might be able to help. Please tell me exactly how you have everything hooked up.
For example if you have the camera hooked straight to the computer or if you're using a capture card if so what kind. Some capture cards have audio gain settings which might be causing the issue. Also some decks and cameras have audio playback volume settings which can also cause audio to be sent to premiere louder than what it started as. So if you give more detail I may be able to offer some sort of help.
One thing you might try though to remove that distortion is too add a lowpass filter to the audio, and start off by setting the low pass filter to like 3000 and just adjust by 500 up or down from there until the distortion goes away. I've had to do this in the past with audio that's distorted before. (Although I haven't experinced the specific issue you're experincing before.) Although it will make the persons voice sound muffled it will take most of the distortion out. Which getting rid of distortion at the cost of making it sound somewhat muffled is a decent trade off if worse comes to worse and you can't get the issue figured out.

No Audio On WebCam Live Ultra When Capturing Video To Email

I am able to capture video, but when I palyback I get no recorded audio. Any suggestions?

I am able to capture video, but when I palyback I get no recorded audio. can anyone help me please PLEASE.
THANKS

Is there a way to mute audio when capturing video?

I have the FCPX installed and want to background capture video without listening to the audio. There was a small preview checkbox with the audio meteres in FCP 7. Is there a similar option in FCPX?

Yea, that certainly works, but it doesn't let me do anything else that requires listening to audio.

Hearing the audio when Capturing video

You folks are the best. My new question deals with capturing video. I can only hear the audio if i go th the clip settings and check the audio box. I know there is a way to have that automaticly happen every time I capture. I am baffled. I have tried to find a way in all the set up things and can't. What have I done or what am I doing wrong? It did it in my other Mac, until I updated.
Do I have to check that box every time?
Thanks, Jon Kessler
PS: i tried to find out about it in the manual but had no luck.

Had question answered by my Apple care guy

Selecting microphone when capturing video from the webcam

Using Final Cut Pro X
I want to capture video from my webcam into Final Cut. I have a USB microphone (Yeti) with which I want to record the audio. I cannot find an option to select my input source for audio when capturing this footage. Final Cut seems to default to my microphone on my webcam, which causes echoing and noise. I can select the USB mic when doing a voiceover, but when I capture video I cannot find an option to select my input. I've made my USB mic my default device in Sys Prefs, but that doesn't work. Any other ideas?
Options
1. Figure out how to change the default input for webcam capture in Final Cut
OR
2. Use another program. I've also tried to do the same in both QuickTime and iMovie, and they both capture audio only from the webcam as well.
Everything I've found online talks about voiceover. I don't want that. I want to capture video with it.
Suggestions are appreciated. Thank you.

acyclone wrote:
Thanks. Don't know why I didn't see it. That arrow is pretty small.
I do still have an issue that I cannot figure out. I'm using the same mic for webcam recording (now in QT thanks to Luis) and in Final Cut for voiceovers. Though I'm still on the same Mic the sound is not the same. It's close, but the sound on the voiceover sounds cleaner and clearer. I'm sitting in the same spot speaking the same way, but the sound quality difference is noticable. Not sure why.
It seems that the difference is in how each software deals with it.
It may be that QT is sampling audio differently from FCP X somehow, or using a different audio codec or whatever.
Just guessing, I really have no concrete knowledge.
Oh, wait: there are a few things that I can notice, after trying a small example: the QT audio is AAC at 44.1 KHz,
the FCP X is AIFF at 48KHz. Compression and sample rate are different.

[SOLVED] ATI HDMI audio fails when playing videos... fine otherwise.

On a fresh install of Arch Linux, despite being an amateur at best. I'm using ATI HDMI audio using the open source driver, on GNOME 3. I'm switching to Catalyst after posting this to see if that might help, somehow.
After adding the radeon.audio=1 to the bootloader, audio on the system began working just fine as long as I restricted myself to audacious (haven't tried another audio player) or the system sound tests. When I try to use VLC, or mplayer2 for that matter, not only does it not play the audio associated with the video but NO audio will pass through the system at all. I have tried changing the audio source in VLC, although default should work... nothing works. Changing the audio in VLC will cause the system's audio to max out. Changing it back to something else doesn't help, but I can change the volume after closing the video programs, and after a few clicks it will go back to the "bloop" sound that confirms volume changes. Everything works fine again.
I have been at this all day and I am at wit's end. My google searches are getting way too long to be of any help. Any pointers or obvious things that I've missed in my caffeine haze would be greatly appreciated. Thanks!
...SOLVED by switching to Catalyst drivers from open source.
Last edited by ohshitgorillas (2012-09-03 02:46:33)

For anyone else looking for the alternatives to xv, it looks like some good answers can be found here: https://bbs.archlinux.org/viewtopic.php?id=133682

60 cycle hum when capturing video

I am using a Canopus ADVC 110 connected to my Mac via RCA (from DVR) and USB (to Mac) When I capture video/audio directly to iMovie HD I get a very quiet (but noticeable) 60 cycle hum. You can hear it on my YouYube video http://www.youtube.com/watch?v=IBQNWYnHygs
Is there anything I can do?

At home - taking a close look at my ADVC-300 which resembles the ADVC-110 much.
On this there is on it's back. Left to right.
DV I/O FireWire (6-pin), S-Video out, three RCA - Video-out - R - Audio-out - L, DC in 5V (Power switch) and Component out.
DC in 5V - is the needed power from Mains adaptor to make it work.
On Front
Three RAC L- Audio-in - R and Video in, S-Video in and DV I/O FireWire (4-pin)
NO USB at all.
I use to connect the DV I/O FireWire (4-pin) to my Mac and VCR to Front side RCA-connectors.
(and back side RCA-connectors to a Reference Monitor (sort of TV))
This works greatly for me to Capture/Import VHS tapes (or Hi-8 or Video-8) to iMovie HD6 and iMovie'08 to 11 and FinalCut Express and FinalCut Pro 6.
DC IN 8v - I can not find and it can not be any thing like USB at all.
Yours Bengt W

Seperate Audio Source When Capturing Video

Similar Messages

Maybe you are looking for