Seperate the badge display into 2 options

This request would allow the badges to be on in the filmstrip and off in the grid view or visa versa rather than on or off for both.

Excellent one. That's one I was going to suggest. My personal preference would be on the filmstrip, since that's really a reference only image. And then the grid view could be clean for viewing the image only. It would make a reallky clean setup in that the inof needed is in the filmstrip view, but the grid view provides a nice clean way to see the image without clutter.

Similar Messages

Put internal display into overscan

I've unlocked screen spanning so that i can have a vga res of 1280x960 but this is putting lots of unnessary pressure on the GPU, the poor thing is obviously suffering sometimes. Things like the fancy screen transitions of exposé and dashboard are extremely jerky. Switch back to mirror mode and they are silky smooth.
I know that Apple in all their wisdom decided not to offer a way for turning off the internal display but is there any way to switch the main display into an overscan mode in order to circumvent the 1024x768 limitation when using mirror mode?
Almost all graphic cards, including the radeon mobility can do overscan so there must be a way to enable it for the ibooks lcd.

HI Sudhakar
Hierarchial ALV is used to show header and Item data in different rows.
IF you want to divide a particual record into different rows then you have to give row no. also in field catalog like
for <field1>
i_fieldcat-row_pos = '1'.
i_fieldcat-column_pos = '1'.
for <field6>
i_fieldcat-row_pos = '2'.
i_fieldcat-row_column = '1'.
Regards
Aditya

I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device"

I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.

I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.

The html select box option is not getting displayed properly in IE11

The html select box option is not getting displayed properly in IE11
I have developed a website that has a select box drop down. The select box drop down is getting displayed properly in IE9. But in IE11, if I am selecting any option apart from the first one, the whole select box option is getting moved up in the page.
In IE11, if option 2 is selected, then the select options is getting moved up. But in IE9, if option 2 is selected, then the select options is getting displayed properly.
Please let me know the fix so that the select options are displayed in the same manner as in IE9.
Sorry but I am unable to upload images as this site is throwing some error

Hi Kevin Shen,
Thanks for post.
I tried above code in ie 11(version 11.0.9600.17633).
But it is not working. If you select option 2, and open select box then it open on the select box.
It should open below the select box.
Code for above:-
<select>
<option>1</option>
<option>2</option>
<option>3</option>
</select>
Sorry I could not attach screen shot. We have normal select box with three options. If we select option 2, it is showing option list on the select box. It is coming below the select box in ie 10 and other browse like chrome.
So what we should do, so that all options will come below the select box?
Thanks,
Yogesh Toke

How to get all values in the range of select option into internal table?

Hi,
I need to capture all entries coming in the range of select option into one internal table.
How to do get that?
For E.g
select-options: matnr for mara-matnr.(select option)
IF I enter G0100013507892 as lower value of matnr and G0100014873947 as higher value
and if there are 10,000 materials in the above range, then I want to capture all theses 10000 materails in one internal table. How to do that?
Regards,
Mrunal

Hello Mrunal Mhaskar ,
What i understand you can do one thing go in debug mode
Try this code : -
LOOP AT s_matnr_ex.
IF s_matnr_ex-low IS NOT INITIAL.
    i_matnr-matnr = s_matnr_ex-low.
    i_matnr-option = s_matnr_ex-option.
    APPEND i_matnr.
    CLEAR : i_matnr.
ENDIF.
ENDLOOP.
LOOP AT s_matnr_ex.
IF s_matnr_ex-high IS NOT INITIAL.
    i_matnr-matnr = s_matnr_ex-high.
    i_matnr-option = s_matnr_ex-option.
    APPEND i_matnr.
    CLEAR : i_matnr.
ENDIF.
ENDLOOP.
In the i_matnr table high and low values are there.
Regards,
Vandana.

How can i use my smart TV as a second monitor for my Power mac (2010) via HDMI cable? i've made the connection but no options show in system prefs display.

How can i use my smart TV as a second monitor for my Power mac (2010) via HDMI cable? i've made the connection but no options show in system prefs display.
the computer:Mac Pro, Mac OS X (10.9.5), 2 x 2.66 Ghz 6-Core intel Xeon
the TV: LG Smart tv

The Mac uses a highly-parameterized universal Driver for every display. The parameters are set at certain times when a query is sent to your display. The display MUST answer with its name and capabilities, or the screen stays dark. A TV set that is off or "not paying attention" because it is set to a different port when the query occurs will rarely answer, and so will often remain dark.
You can use tools in the System Report to see whether your display has been detected at all. If it has, the report will look something like this, but its name will appear:
The times when the query is sent are:
• at Startup
• at wake from sleep
• when the Mac-end of the cable is inserted
• when using the Option ( Detect Displays ) button in displays preferences

HI, I am trying to connect my macbook pro, 18 months old, to a projector using the mini display port and a cable/connector to a VGA port on the back of the projector. It all fits but the there is nothing happening? no mirroring option. Any ideas?

HI, I am trying to connect my macbook pro, 18 months old, to a projector using the mini display port and a cable/connector to a VGA port on the back of the projector. It all fits but the there is nothing happening? no mirroring option. Any ideas appreciated. Many thanks

to get to the Detect Displays button you have to hold down the Option key and the button appears.
SeanfromFulham wrote:
Many thanks, however I don't seem to have any relevant options under displays.

My iPad won't let me sign into my Apple ID when I try and download an app it asks for my id and password and when i type it in the iPad displays a message saying cannot connect to iTunes Store. However when i do this on my phone it works perfectly.

My iPad won't let me sign into my Apple ID when I try and download an app it asks for my id and password and when i type it in the iPad displays a message saying cannot connect to iTunes Store. However when i do this on my phone it works perfectly. Even when i sign in and out.
Has anyone else had this problem? If so how can I fix this?

Remember, any purchased item from the itunes store is forever associated with the Apple ID used to buy it. So when you get prompted for an ID/password and it doesn't accept it, then you are using the wrong ID.
Go to Settings>iTunes and App Stores, be sure it's logged into the ID you have set on the iphone (since that one seems to be connecting with the right ID). If you've done this, then you might wait a bit to see if the "cannot connect to .. store" message has to do with internet connections.

Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK

Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK with plug-in keyboard and mouse

Hi, Derek -
...the screen splits into 4 areas and open windows seperate and shrink.
Sounds like Spaces is being activated somehow. With the wired keyboard and mouse in use, select the Exposé & Spaces control pane in System Preferences, click the choice in that pane for Spaces. See what the settings are. There are some activation settings in that pane - by default, F8 activates it.
It could be that the bluetooth keyboard has some stuck keys and is activating Spaces; or that the activation command has somehow been reset to something that the bluetooth mouse, or bluetooth itself, is triggering.

I have my Macbook Air hooked up to a Tunderbolt Display, is there any way to either power on or wake from sleep mode using an Apple USB keyboard pluged into the Thunderbolt display?

I have my Macbook Air hooked up to a Thunderbolt Display, is there any way to power on the Macbook Air using an Apple USB keyboard plugged into the Thunderbolt display? I would like to be able to keep the Macbook Air in the Archbook dock and not have to open it to power it on?
Thanks for any advise.

SadisticIron wrote:
i just baught my first iphone and it is a jalbroken
Buzz! Thank you for playing!
Discussing jailbroken devices is forbidden here by the Terms of Service.
You can not get help here.

Why do some computers running Firefox 6.02 only display 5 or 6 applications in the "applications" tab under "options" and others show about 25?

I am running Firefox 6.0.2 on several computers and on several of them the applications tab under "options" only shows 5 or 6 applications while another shows 20-25 applications including PDF which is what I am interested in. How can I get applications to appear on this menu?
All of the computers in questions are running Windows XP Pro. On the computer with the limited menu if I attempt to download a PDF copy of my bank statement Mozilla opens the PDF rather than opening it with my PDF program. If I attempt to save the file or print it, Mozilla crashes. On the computer which lists all of the apps on the application tab the PDF opens normally using the program which I have selected for opening that file type.

You can try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
You need to close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can check if there is an update for your graphics display driver.
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

HT2905 Where is the Display Duplicates option in iTunes 11?

I just downloaded iTunes 11 and notice that the "display duplicates" option is not available in the Music Library. Why?

Two Windows scripts to make playlists of Duplicates and Exact Duplicates. Use shift-delete to remove selected tracks from the library as well as the playlist.
There is also my DeDuper script if you don't want to do it by hand. Please take note of the warning to backup your library before deduping. See this thread for background.
tt2

Is there a specific reason why apple did not incorporate hdmi into the thunderbolt displays ?

Is there a specific reason why apple did not incorporate hdmi into the thunderbolt displays and the new imacs? Everything on the market uses hdmi...they then add one to the new macbook pros, but none on the displays. Is there a reason?

These are User to User support Forums where we all help each other. No one from Apple replies here. Obviously we have no way of knowing why Apple does or doesn't choose to do something.

How to display the xml content into my datagrid

Hi Experts,
                 i have created a webservice for sales quotation through DI-Server.iam able to add a new sales quotation through my coding & iam able to get the sales quotation based on the DOcEntry in an *XML file*.
          The xml file that i got using DOCENTRY is in this way:--
<?xml version="1.0" encoding="utf-8" ?>
- <BOM>
- <BO>
- <AdmInfo>
<Object>oRecordset</Object>
</AdmInfo>
- <OQUT>
- <row>
<DocEntry>8</DocEntry>
<DocNum>8</DocNum>
<DocDate>20080715</DocDate>
<DocDueDate>20080815</DocDueDate>
<CardCode>C0003</CardCode>
<CardName>HP India</CardName>
<DocTotal>14500.000000</DocTotal>
<ItemCode>A00006</ItemCode>
<Dscription>HP Officejet 7310 All-in-One</Dscription>
<Quantity>1.000000</Quantity>
   <Price>14500.000000</Price>
<Currency>INR</Currency>
   <DiscPrcnt>10.000000</DiscPrcnt>
<LineTotal>14500.000000</LineTotal>
   </row>
</OQUT>
</BO>
</BOM>
Now the problem is from this xml content i should display the values in my datagrid like:
DocEntryCardCodeDocDueDateItemCodeDscriptionQtyTotal
     8--C000320081116--A00006-HP-off jet-2 ---                     1000
can anybody suggest me some ideas that how to get the SPECIFIED values into my datagrid...........
regards,
shangai.

hi vincent,
                Thanks for your reply.iam unable to understand these lines in your code..iam working in vb.net
public static DataSet GetDataSetFromXML(XmlNode XMLNode)
grid.DataSource = GetDataSetFromXML(Result.SelectSingleNode(xpath_string));
this is my coding....it's throwing an error when i declare like this
Public Sub GetDataSetFromXML(ByVal XmlNode)
        Dim ds As New DataSet
        Dim reader As XmlNodeReader
        reader = New XmlNodeReader(XmlNode)
        ds.ReadXml(reader)
        reader.Close()
        'Return ds --->(error with syntax)
    End Sub
DataGrid1.DataSource = GetDataSetFromXML(oXmlReply.SelectSingleNode("//DocDueDate"))
            DataGrid1.DataBind()
regards,
shangai

When i plugged in my ipod charger into my macbook pro it off instantly and wouldnt turn back on, also the charger displays a dim green light when connected to the mac. Does anyone have a sollution to this problem?

When i plugged in my ipod charger into my macbook pro it turned off instantly and wouldnt turn back on, also the charger displays a dim green light when connected to the mac. Does anyone have a sollution to this problem?

The dim green light appears to be flashing orange too

Seperate the badge display into 2 options

Similar Messages

Maybe you are looking for